Biostar TA770 E, XE, TA790 XE Motherboard Setup Manual

TA770E/TA770XE/TA790XE Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1

1.2

1.3

1.4

Before You Start ................................................................................ 1

Package Checklist ............................................................................. 1

Motherboard Features...................................................................... 2

Rear Panel Connectors ..................................................................... 3

1.5

Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5

2.1

2.2

Installing Central Processing Unit (CPU)....................................... 5

FAN Headers...................................................................................... 7

2.3

Installing System Memory................................................................ 8

2.4

Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup .................. 14

3.1

3.2

How to Setup Jumpers .................................................................... 14

Detail Settings.................................................................................. 14

Chapter 4: RAID Functions .................................. 20

4.1

4.2

Operating System............................................................................ 20

Raid Arrays ...................................................................................... 20

4.3

How RAID Works............................................................................. 20

Chapter 5: T-Series BIOS & Software................... 24

5.1

5.2

T-Series BIOS..................................................................................... 24

T-Series Software ............................................................................. 32

Chapter 6: Useful Help ........................................ 42

6.1

6.2

Driver Installation Note.................................................................. 42

Extra Information............................................................................ 43

6.3

AMI BIOS Beep Code....................................................................... 44

6.4

Troubleshooting............................................................................... 45

Appendix: SPEC In Other Languages ................... 46

German.................................................................................................................. 46

French .................................................................................................................... 48

Italian..................................................................................................................... 50

Spanish ................................................................................................................... 52

Portuguese ............................................................................................................ 54

Polish...................................................................................................................... 56

Russian ................................................................................................................... 58

Arabic..................................................................................................................... 60

Japanese ................................................................................................................ 62

TA770E/TA770XE/TA790XE

CHAPTER 1: INTRODUCTION

1.1 B

EFORE

Y

OU

S

TART

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with sufficient lighting.

Always disconnect the computer from power outlet before operation.

Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.

Keep the computer from dangerous area, such as heat source, humid air and water.

The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 P

ACKAGE

C

HECKLIST

IDE Cable X 1

Serial ATA Cable X 2

Serial ATA Power Cable X 1

Rear I/O Panel for ATX Case X 1

User’s Manual X 1

Fully Setup Driver CD X 1

FDD Cable X 1 (optional)

USB 2.0 Cable X1 (optional)

S/PDIF out Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

1

Motherboard Manual

1.3 M

OTHERBOARD

F

EATURES

CPU

FSB

Main

Memory

IDE

Chipset

Super I/O

TA770E/TA770XE

Socket AM2+

AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 /

Sempron / Phenom / Phenom II processors

AMD 64 Architecture enables 32 and 64 bit computing

Supports Hyper Transport 3.0

TA790XE

Socket AM2+


Sempron / Phenom / Phenom II processors

AMD 64 Architecture enables 32 and 64 bit computing

Supports Hyper Transport 3.0

Support HyperTransport 3.0

Supports up to 5.2 GT/s Bandwidth

AMD 770

AMD SB700 / SB710

Support HyperTransport 3.0

Supports up to 5.2 GT/s Bandwidth

AMD 790X

AMD SB750

ITE IT8718F ITE IT8718F

Provides the most commonly used legacy Super Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

DIMM Slots x 4

Each DIMM supports 256MB/512MB/

1GB/2GB/4GB DDR2

Max Memory Capicity 16GB

Dual Channel Mode DDR2 memory module

Supports DDR2 533 / 667 / 800

Supports DDR2 1066 (by AM2+/AM3 CPU)

Registered DIMM and ECC DIMM is not supported

Fan Speed Controller

ITE's "Smart Guardian" function

DIMM Slots x 4

Each DIMM supports 256MB/512MB/

1GB/2GB/4GB DDR2

Max Memory Capicity 16GB

Dual Channel Mode DDR2 memory module

Supports DDR2 533 / 667 / 800

Supports DDR2 1066 (by AM2+/AM3 CPU)

Registered DIMM and ECC DIMM is not supported

AMD SB700 / SB710

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode supports PIO Mode 0~4,

AMD SB750 supports PIO Mode 0~4,

AMD SB700 / SB710 AMD SB750

SATA II

LAN

Sound

Data transfer rates up to 3 Gb/s.

SATA Version 2.0 specification compliant.

RAID 0,1,1+0 support

Realtek RTL 8111DL

10 / 100 Mb/s / 1Gb/s auto negotiation

Half / Full duplex capability

ALC662

5.1channels audio out

Supports HD Audio

Data transfer rates up to 3 Gb/s.

SATA Version 2.0 specification compliant.

RAID 0,1,5,1+0 support

Realtek RTL 8111DL

10 / 100 Mb/s / 1Gb/s auto negotiation

Half / Full duplex capability

ALC662

5.1channels audio out

Supports HD Audio

2

TA770E/TA770XE

PCI slot

Slots PCI Express Gen2 x16 slot

PCI Express Gen2 x1 slot

Floppy Connector

IDE Connector

SATA Connector

Front Panel Connector

Front Audio Connector

CD-in Connector

On Board S/PDIF out Connector

Connectors CPU Fan Header

System Fan Header

CMOS clear Header

USB Connector

Serial port Connector

Power Connector (24pin)


Back Panel

I/O

PS/2 Keyboard

PS/2 Mouse

LAN port

USB Port

Audio Jack x1 x1 x1 x6 x3

Board Size 220mm (W) x 305 mm (L)

Windows XP / Vista 32 / Vista 64

OS Support Biostar reserves the right to add or remove support for any OS With or without notice. x3 x3 x1 x1 x1 x1 x1 x2 x1 x6 x1 x1 x1 x1 x2 x1 x1

1.4 R

EAR

P

ANEL

C

ONNECTORS


TA790XE

PCI slot



Floppy Connector

IDE Connector

SATA Connector

Front Panel Connector

Front Audio Connector

CD-in Connector

S/PDIF out Connector

CPU Fan Header

System Fan Header

CMOS clear Header

USB Connector

Serial port Connector



PS/2 Keyboard

PS/2 Mouse

LAN port

USB Port

Audio Jack x1 x1 x1 x6 x3

220mm (W) x 305 mm (L)


Biostar reserves the right to add or remove support for any OS With or without notice. x3 x3 x1 x1 x1 x1 x1 x2 x1 x6 x1 x1 x1 x1 x2 x1 x1

PS/2

Mouse

LAN

Line In/

Surround

Line Out

Mic In 1/

Bass/ Center

PS/2

Keyboard

USBX2 USBX2 USBX2

3


1.5 M

OTHERBOARD

L

AYOUT

ATXPWR2

JUSBV1

KBMS1

USB1

USB2

ATXPWR1

4

RJ45USB1

AUDIO2

F_AUDIO 1

PH_LED1

PH_LED2

PH_LED3

PH_LED4

CD_IN1

CPU_FAN1

SYS_FAN1

JSPDIF_OUT1

AUXPWR1

PEX1_1

LAN

PEX16_1

AMD

770/

790GX

PEX1_2

BAT1

Codec

PCI1

PCI2

PCI3

FDD1

JCOM1

Note: represents the 1 st pin.

AMD

SB700/

SB710/

SB750

JCMOS1

BIOS

Super I/O

SATA1 SATA4

LED_D1

LED_D2

SATA5

SW_PWR1

SATA2

SATA3

JUSBV2

F_USB1 F_USB2 F_USB3

SATA6

SW_RST1

SYS_FAN2 PANEL1


CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING

C

ENTRAL

P

ROCESSING

U

NIT

(CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only in the correct orientation.

5


Step 4: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to CPU_FAN1 to complete the installation.

Note: Please update the BIOS to the latest version while using AM2+ CPUs. Due to the latest CPU transition, you may encounter the situation that the new system failed to boot while using new

AM2+ CPUs. In this case, please install one standard AM2 CPU to boot your system, and update the latest BIOS from our website for AM2+ CPUs support.

6


2.2 FAN H

EADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

4

1

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

Fan

Control (By Fan)

SYS_FAN1: NorthBridge Fan Header

SYS_FAN2: System Fan Header

SYS_ FAN 1

3

1

SYS_ FAN 2

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

1 3

Note:

The CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to

GND.

7


2.3 I

NSTALLING

S

YSTEM

M

EMORY

A. DDR2 Modules

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

8

2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.


B. Memory Capacity

DIMM Socket

Location

DDR2 Module

Total Memory

DIMMA1 256MB/512MB/1GB/2GB/4GB

Size

DIMMA2 256MB/512MB/1GB/2GB/4GB

DIMMB2 256MB/512MB/1GB/2GB/4GB

C. Dual Channel Memory installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DIMMA1 DIMMB1 DIMMA2 DIMMB2

Enabled O O X X

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or x16)

9


2.4 C

ONNECTORS AND

S

LOTS

FDD1: Floppy Disk Connector

The motherboard provides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables.

10

2

34

1 33

IDE1: Hard Disk Connector

The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode

0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.

The IDE connector can connect a master and a slave drive, so you can connect up to two hard disk drives.

40 39

2 1


SATA1~SATA6: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 6 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

SATA1 SATA4

SATA2 SATA5

SATA3 SATA6

1 4 7

Pin Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

7 Ground

AUXPWR1: Auxiliary Power for Graphics

This connector is an auxiliary power connection for graphics cards. Exclusive power for the graphics card provides better graphics performance.

Pin Assignment

4 1

1 +12V

2 Ground

3 Ground

4 VCC

11


ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX power supply.

12 24

12

Pin Assignment

13 +3.3V

14 -12V

15 Ground

16 PS_ON

17 Ground

18 Ground

19 Ground

20 NC

21 +5V

22 +5V

23 +5V

24 Ground

1 13

Pin Assignment

1 +3.3V

2 +3.3V

3 Ground

4 +5V

5 Ground

6 +5V

7 Ground

8 PW_OK

10 +12V

11 +12V

12 +3.3V

ATXPWR2: ATX Power Source Connector

Connecting this connector will provide +12V to CPU power circuit.

1 4

2 3

Pin Assignment

1 +12V

2 +12V

3 Ground

4 Ground

Note:

Before power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in.


PEX16_1: PCI-Express Gen2 x16 Slot

-

-

PCI-Express 2.0 compliant.

Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally.

-

-

PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

2X bandwidth over the PCI-Express 1.1 architecture.

PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slots

-

-

-

-

PCI-Express 2.0 compliant.

Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins..

2X bandwidth over the PCI-Express 1.1 architecture.

PEX1_1

PEX16_1

PEX1_2

PCI1~PCI3: Peripheral Component Interconnect Slots

This motherboard is equipped with 3 standard PCI slots. PCI stands for

Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

PCI3

13


CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO

S

ETUP

J

UMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

14

3.2 D

ETAIL

S

ETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

9

1

PWR_LED

On/Off

+ + -

+ -

16

8

SPK

HLED

RST

Pin Assignment Function Function

1 +5V 9 N/A

N/A

2 N/A

3 N/A

Speaker

Connector

10 N/A

11 N/A N/A

4 Speaker

5

6

HDD LED (+)

HDD LED (-)

7 Ground

Hard drive

LED

Reset button

12

13

14

Power LED (+)

Power LED (+)

Power LED (-)

16 Ground

Power LED

Power-on button


JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.

3

1

Pin 1-2 Close:

Normal Operation (default).

3

3

1

1

Pin 2-3 Close:

Clear CMOS data.

※

Clear CMOS Procedures:

1.

2.

3.

4.

5.

6.

Remove AC power line.

Set the jumper to “Pin 2-3 close”.

Wait for five seconds.

Set the jumper to “Pin 1-2 close”.

Power on the AC.

Reset your desired password or clear the CMOS data.

F_USB1~F_USB3: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.

Pin Assignment

F _USB1 F_

F_ USB2

USB3

2 10

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

10 NC

1 9

15


F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector, not AC’97.

10 9

Pin Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

2 1

8 Key

9 Left line in

SPDIF1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

1

Pin Assignment

1 +5V

2 SPDIF_OUT

3 Ground

3

16


CD_IN1: CD-ROM Audio-in Connector

This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

1

4

Pin Assignment

1 Left Channel Input

2 Ground

3 Ground

4 Right Channel Input

JCOM1: Serial port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment

2

1

10

9

4 Data terminal ready

7

8

Request to send

Clear to send

10 NC

17


JUSBV1: Power Source Headers for Rear USB Ports

Pin 1-2 Close: +5V for USB ports at USB1/USB2/RJ45USB1.

Pin 2-3 Close: +5V STB for USB ports at USB1/USB2/RJ45USB1.

3

3

1

1

Pin 1-2 close

3

1

Pin 2-3 close

JUSBV2: Power Source Headers for Front USB Ports

Pin 1-3, 2-4 Close: +5V for USB ports at F_USB1/F_USB2/F_USB3.

Pin 3-5, 4-6 Close: +5V STB for USB ports at F_USB1/F_USB2/F_USB3.

1

3

2

4

Pin 1-3, 2-4 close

1

5

2

6

3

5

4

6

Pin 3-5, 4-6 close

18


On-Board LED Indicators

There are 6 LED indicators showing system status.

PH_LED1

PH_LED2

PH_LED3

PH_LED4

LED_D1

LED_D2

LED_D1 & LED_D2: Debug Indicators

PH_LED1 ~ PH_LED4: Power Status Indicators

Please refer to the tables below for specific messages:

LED_D1 LED_D2 Message

OFF OFF Abnormal: CPU / Chipset error.

PH_LED1~PH_LED4 Phase Indicator

On-Board Buttons

There are 2 on-board buttons.

SW_PWR1

SW_PWR1: Power Switch button.

SW_RST1: Reset button.

SW_RST1

19


CHAPTER 4: RAID FUNCTIONS

4.1 O

PERATING

S

YSTEM

Supports Windows XP and Windows VISTA.

4.2 R

AID

A

RRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications.

RAID 1: RAID 1 defines techniques for mirroring data.

RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1.

RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.

4.3 H

OW

RAID W

ORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.

Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance.

Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity.

Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost.

Fault Tolerance: No.

20

Block 1

Block 3

Block 5

Block 2

Block 4

Block 6


RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.


Drives: Minimum 2, and maximum is 2.

Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity.

Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive.

Drawbacks: Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

Fault Tolerance: Yes.

Block 1

Block 2

Block 3

Block 1

Block 2

Block 3

21


RAID 1+0:

RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved resiliency, performance and rebuild performance.


Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.

Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.

Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1.


Block 1

Block 3

Block 5

Block 1

Block 3

Block 5

Block 2

Block 4

Block 6

Block 2

Block 4

Block 6

22


RAID 5: (TA790XE Only)

RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself.


Drives: Minimum 3.

Uses: RAID 5 is recommended for transaction processing and general purpose service.

Benefits: An ideal combination of good performance, good fault tolerance, and high capacity and storage efficiency.

Drawbacks: Individual block data transfer rate same as a single disk. Write performance can be CPU intensive.


Disk 1

DATA 1

DATA 3

PARITY

DATA 7

DATA 9

PARITY

Disk 2

DATA 2

PARITY

DATA 5

DATA 8

PARITY

DATA 11

Disk 3

PARITY

DATA 4

DATA 6

PARITY

DATA 10

DATA 12

23


CHAPTER 5: T-SERIES BIOS & SOFTWARE

5.1 T-S

ERIES

BIOS

T-Series BIOS Features

Overclocking Navigator Engine (O.N.E.)

Memory Integration Test (M.I.T., under Overclock Navigator Engine)

BIO-Flasher: Update BIOS file from USB Flash Drive or FDD

Self Recovery System (S.R.S)

Smart Fan Function

CMOS Reloading Program

!! WARNING !!

For better system performance, the BIOS firmware is being continuously updated. The BIOS information described below in this manual is for your reference only and the actual BIOS information and settings on board may be different from this manual. For further information of setting up the BIOS, please refer to the BIOS Manual in the Setup CD.

A. Overclocking Navigator Engine (O.N.E.)

ONE provides two powerful overclocking engines: MOS and AOS for both

Elite and Casual overclockers.

Main Advanced PCIPnP

BIOS SETUP UTILITY

Boot Chipset T-Series Exit

T-Series Settings

WARNING: Please Clear CMOS if system no display after overclocking.

OverClock Navigator [Normal]

=========== Automate OverClock System ===========

Auto OverClock System [V6-Tech Engine]

============ Manual OverClock System ============

> Over-Voltage Configuration

CPU Frequency [200]

> G.P.U Phase Control

> CPU FID/VID Control

> DRAM Timing Configuation

> Hyper Transport Configuration

> Memory Configuration

Integrated Memory Test [Disabled]

Options

Normal

Automate OverClock

Manual OverClock

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit

Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

24


Manual Overclock System (M.O.S.)

MOS is designed for experienced overclock users.

It allows users to customize personal overclock settings.

Main Advanced


WARNING:

PCIPnP

Please Clear CMOS if system no display after overclocking.



Options

Normal














+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


↓

Advanced PCIPnP


Boot Chipset T-Series Exit Main



OverClock Navigator [Manual OverClock]












Options

Normal



+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


CPU Frequency

CPU Frequency is directly in proportion to system performance. To maintain the system stability, CPU voltage needs to be increased also when raising CPU frequency.

CPU FID/VID Control

Enter this function for more advanced CPU settings.

Voltage Configuration

Enter this function for more advanced voltage settings.

DRAM Timing Configuration

Enter this function for more advanced DRAM clock settings.

25


Hyper Transport Configuration

Enter this function for more advanced Hyper Transport settings.

Memory Configuration

Enter this function for more advanced memory settings.

EC Configuration

Enter this function for more advanced Embedded Controller settings.

GFX Engine Clock Override

This item allows control the GFX Engine Clock.

NOTE

Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users. Therefore, we will not be responsible for any hardware damage which may be caused by overclocking. We also would not guarantee any overclocking performance.

Automatic Overclock System (A.O.S.)

For beginners in overclock field, BET had developed an easy, fast, and powerful feature to increase the system performance, named A.O.S.

Based on many tests and experiments, A.O.S. provides 3 ideal overclock configurations that are able to raise the system performance in a single step.



Boot Chipset T-Series





Exit

Options

Normal











+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


26


V6 Tech Engine

This engine will make a good over-clock performance.






OverClock Navigator [Automate OverClock]












Options

V6-Tech Engine

V8-Tech Engine

V12-Tech Engine

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


V8 Tech Engine

This engine will make a better over-clock performance.


















Options

V6-Tech Engine

V8-Tech Engine

V12-Tech Engine

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


V12 Tech Engine

This engine will make a best over-clock performance.


















Options

V6-Tech Engine

V8-Tech Engine

V12-Tech Engine

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


27


Notices:

Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model.

B. Memory Integration Test (M.I.T.)

This function is under “Overclocking Navigator Engine” item.

MIT allows users to test memory compatibilities, and no extra devices or software are needed.

Step 1

The default setting under this item is “Disabled”; the condition parameter should be changed to “Enable” to proceed this test.


















Options

Enabled

Disabled

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


↓

Advanced PCIPnP


Boot Chipset T-Series Exit Main














Integrated Memory Test [Enabled]

Options

Enabled

Disabled

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


Step 2

Save and Exit from CMOS setup and reboot the system to activate this test.

Run this test for 5 minutes (minimum) to ensure the memory stability.

Step 3

When the process is done, change the setting back from “Enable” to “Disable” to complete the test.

28


C. BIO-Flasher

BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk.

The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>

during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the

USB port or the floppy disk drive.

4. Power on or reset the computer and then press <F12> during the POST process.

A select dialog as the picture on the right appears.

Select the device contains the BIOS file and press <Enter> to enter the utility.

5. The utility will show the BIOS files and their respective information. Select the proper

BIOS file and press <Enter> then <Y> to perform the BIOS update process.

6. After the update process, the utility will ask you to reboot the system.

Press <Y> to proceed. BIOS update completes. z This utility only allows storage device with FAT32/16 format and single partition. z Shutting down or resetting the system while updating the BIOS will lead to system boot failure.

29


D. Self Recovery System (S.R.S.)

This function can’t be seen under BIOS setup; and is always on whenever the system starts up.

However, it can prevent system hang-up due to inappropriate overclock actions.

When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured.

E. Smart Fan Function

Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.

This is a brilliant feature to control CPU/System Temperature vs. Fan speed.

When enabling Smart Fan function, Fan speed is controlled automatically by

CPU/System temperature.

This function will protect CPU/System from overheat problem and maintain the system temperature at a safe level.




Advanced Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

> CPU Configuration

> SuperIO Configuration

> Smart Fan Configuration

> Hardware Health Configuration

> Power Configuration

> USB Configuration

Enter

F1

F10

ESC

Select Screen

Select Item

Go to Sub Screen

General Help

Save and Exit


↓


Advanced

Smart Fan Configuration

CPU Smart Fan [Disabled]

Smart Fan Calibration

Control Mode

Fan Ctrl OFF( C)

Fan Ctrl On( C)

Fan Ctrl Start value

Fan Ctrl Sensitive

When you choice [Auto]

,[3Pin] or [4Pin], please run the calibration to define the Fan parameters for

Smart Fan control

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


30


Smart Fan Calibration

Choose this item and then the BIOS will automatically test and detect the

CPU/System fan functions and show CPU/System fan speed.

Control Mode

This item provides several operation modes of the fan.

Fan Ctrl OFF(℃)

If the CPU/System temperature is lower than the set value, the CPU/

System fan will turn off. The range is from 0~127, with an interval of 1.

Fan Ctrl On(℃)

The CPU/System fan starts to work when CPU/System temperature arrives to this set value. The range is from 0~127, with an interval of 1.

Fan Ctrl Start Value

When CPU/System temperature arrives to the set value, the CPU/System fan will work under Smart Fan Function mode. The range is from 0~127, with an interval of 1.

Fan Ctrl Sensitive

Increasing the value of slope PWM will raise the speed of CPU/System fan.

The range is from 1~127, with an interval of 1.

F. CMOS Reloading Program

It allows users to save different CMOS settings into BIOS-ROM.

Users are able to reload any saved CMOS setting for customizing system configurations. Moreover, users are able to save an ideal overclock setting during overclock operation.

There are 10 sets of record addresses in total, and users are able to name the

CMOS data according to personal preference.




Exit Options

Save Changes and Exit

Discard Changes and Exit

Discard Changes

Load Optimal Defaults

CMOS Backup Function

CMOS Backup Func

CMOS Data

CMOS Data

Reload

Save

Security Settings

> Security

Enter

F1

F10

ESC

Select Screen

Select Item

Go to Sub Screen

General Help

Save and Exit


31


5.2 T-S

ERIES

S

OFTWARE

Installing T-Series Software

1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. title.

3. Follow the on-screen instructions to complete the installation.

Launching T-Series Software

After the installation process, you will see the software icon “T-Utility

OverClock III” / “HW Monitor” / “eHOT Line” / “Tseries BIOS Update” appears on the desktop. Double-click the icon to launch T-Series utility.

OverClock 3

OverClock 3 is equipped with f riendly interface and solid over-clock features , and it will help you easily do over-clocking under windows environment.

Double-click the desktop icon, OverClock 3 will be launched; the first window you will see is Main Panel. In this panel you will see current CPU Speed and

CPU/Memory/PCI-E/PCI Clock.

Open

Over Clock

Panel

32

Open a saved setting/

Save current settings

Open

About Panel

Open

Over Voltage

Panel

ON/OFF

Over Clock Panel

Restore Default Settings

AUTO Over-Clock

V3/V6/V9 Engine

Real-time Over-clock


Manual Adjust CPU Clock

Test & Apply Manual Settings

AUTO

User can click this button and the utility will set the best and stable performance and frequency automatically. A warning dialog as below will show up to notify you that the system may become unstable, click on “OK” to continue.

33


Then the utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, launch the utility again and the utility will load the previously verified best and stable frequency.

V3 / V6 / V9

Provide user the ability to do real-time over-clock adjustment. For beginners in over-clock field, this is a powerful feature to increase system performance.

V3 Engine

This engine will make a good over-clock performance.

V6 Engine

This engine will make a better over-clock performance.

V9 Engine

This engine will make a best over-clock performance.

TEST

You can also manually adjust CPU clock by pressing +/- button or moving

the level bar. After manually adjust the CPU clock, you should click

TEST button and the utility will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fails, system will do a fail-safe rebooting. After reboot, the utility will restore to the hardware default setting.

Warning

Manually over-clock is potentially dangerous, especially when the over-clocking percentage is over 110 %. We strongly recommend you test every speed you over-clock by click the TEST button. Or, you can just click AUTO over-clock button and let the Utility automatically get the best result for you.

RESET

Click this button and the utility will restore all values to the hardware default setting.

34

Over Voltage Panel


Manual Adjust

CPU/Memory/Chipset/FSB Voltage

CPU Voltage

This function allows user to adjust CPU voltage. Click on “+” to increase or “-“ to decrease the CPU voltage.

Memory Voltage

This function allows user to adjust Memory voltage. Click on “+” to increase or “-“ to decrease the Memory voltage.

Chip Voltage

This function allows user to adjust Chipset voltage. Click on “+” to increase or “-“ to decrease the Chipset voltage.

FSB Voltage

This function allows user to adjust FSB voltage. Click on “+” to increase or “-“ to decrease the FSB voltage.

35


About Panel

In this panel, you can get model name and other system information that may related to over-clocking.

You can also get the version number of this software.

Note

Because the Over Clock and Over

Voltage features are controlled by several separate chipset, the utility divides these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but it will not interfere with other panels’ functions.

This property can make the utility more robust.

Hardware Monitor

HW Monitor is a monitor utility that helps you to maintain the health of the PC.

It provides real-time information of CPU/GPU/System temperature, fan speed, and voltage.

This area shows voltage information

Voltage Panel

This area shows CPU information

Fan Panel

This area shows CPU/System temperature

Turn to Fan Panel

36

This area shows CPU/System fan speed

Turn to Voltage P anel


eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our

Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.

Before you use this utility, please set Outlook Express as your default e-mail client application program.

* represent s import ant information that you must provide. Without this informat ion, you may not be able to send out the mail.

This block will show the information which would be collect ed in the mail.

* Describe condition of your system.

* Select your area or the area close to you.

Provide the e-mail address that you would like to send t he copy to.

* Provide the name of the memory module manufacturer.

Send the mail out.

Exit this dialog.

Save these information to a .txt file

Provide the name of the power supply manufacturer and the model no.

After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name.

37


Enter the file name and then click

“Save”. Your system information will be saved to a .txt file.

Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.

We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.

If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application.

Go to the following web http://www.biostar.com.tw/app/en-us/about/contact.php

for getting our contact information.

38


BIOS Update

BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system.

AWARD BIOS

Show current BIOS information

AMI BIOS

Clear CMOS function

(Only for AWARD BIOS)

Save current BIOS to a .bin file

Online Update function

(Only for AMI BIOS)

Update BIOS with a BIOS file

<Backup BIOS>

Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.)

Then click Save.

After the saving process, finish dialog will show. Click on OK to complete the BIOS Backup procedure.

39


<Update BIOS>

Before doing this, please download the proper BIOS file from the website.

For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first.

Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.

After the BIOS Backup procedure, the open dialog will show for requesting the

BIOS file which is going to be updated.

Please choose the proper BIOS file for updating, then click on Open.

The utility will update BIOS with the proper BIOS file, and this process may take minutes. Please do not open any other applications during this process.

After the BIOS Update process, click on

OK to restart the system.

While the system boots up and the full screen logo shows, press key to enter BIOS setup.

<Delete>

In the BIOS setup, use the Load Optimized Defaults function and then Save and

Exit Setup to exit BIOS setup. BIOS Update is completed.

40


<Online Update> (for AMI BIOS only)

Automatically download and update the latest BIOS via internet; make sure

that the computer is connected to the internet before using this function.

After clicking on the Onlinr Update button, the utility will search for the latest BIOS from internet. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed.

If there is no other newer BIOS version, the utility will also tell you that your BIOS has been the latest version.

Download completes; the utility will ask you to program (update) the

BIOS. Click Yes to proceed.

The programing procedure may take minutes, please do not make any operation

during the programing process.

After the updating process, the utility will ask you to reboot the system. Click OK to reboot.

While the system boots up and the full screen logo shows, press key to enter BIOS setup.

<Delete>

In the BIOS setup, use the Load Optimized Defaults function and then Save and

Exit Setup to exit BIOS setup. Online Update is completed.

All the information and content above about the T-Series software are subject to be changed without notice. For better performance, the software is being continuously updated. The information and pictures described above are for your reference only.

The actual information and settings on board may be slightly different from this manual.

41


CHAPTER 6: USEFUL HELP

6.1 D

RIVER

I

NSTALLATION

N

OTE

After you installed your operating system, please insert the Fully Setup

Driver CD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the CD

42

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver

CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from

http://www.adobe.com/products/acrobat/readstep2.html


6.2 E

XTRA

I

NFORMATION

CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

43


6.3 AMI BIOS B

EEP

C

ODE

Boot Block Beep Codes

Number of Beeps

1

2

3

4

5

7

10

11

12

13

Description

No media present. (Insert diskette in floppy drive A:)

“AMIBOOT.ROM” file not found in root directory of diskette in

A:

Insert next diskette if multiple diskettes are used for recovery

Flash Programming successful

File read error

No Flash EPROM detected

Flash Erase error

Flash Program error

“AMIBOOT.ROM” file size error

BIOS ROM image mismatch (file layout does not match image present in flash device)

POST BIOS Beep Codes

Number of Beeps

1

3

6

7

8

Description

Memory refresh timer error

Base memory read/write test error

Keyboard controller BAT command failed

General exception error (processor exception interrupt error)

Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3

6, 7

8

Reseat the memory, or replace with known good modules.

Fatal error indicating a serious problem with the system.

Consult your system manufacturer. Before declaring the motherboard beyond all hope, eliminate the possibility of interference by a malfunctioning add-in card. Remove all expansion cards except the video adapter. z If beep codes are generated when all other expansion cards are absent, consult your system manufacturer’s technical support. z If beep codes are not generated when all other expansion cards are absent, one of the add-in cards is causing the malfunction. Insert the cards back into the system one at a time until the problem happens again. This will reveal the malfunctioning card.

If the system video adapter is an add-in card, replace or reseat the video adapter. If the video adapter is an integrated part of the system board, the board may be faulty.

44


6.4 T

ROUBLESHOOTING

Probable Solution

1. There is no power in the system.

Power LED does not shine; the fan of the power supply does not work

2. Indicator light on keyboard does not shine.

1. Make sure power cable is securely plugged in.

3. Contact technical support.

System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.

System does not boot from a hard disk drive, but can be booted from optical drive.

System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk.

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

1. Back up data and applications files.

2. Reformat the hard drive.

Re-install applications and data using backup disks.

Screen message shows “Invalid

Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure correct information is in setup.

System cannot boot after user installs a second hard drive.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

45


APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

CPU

Sockel AM2+

TA770E/TA770XE TA790XE


Sempron / Phenom / Phenom II Prozessoren

Sockel AM2+


Sempron / Phenom / Phenom II Prozessoren

Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bit- und 64-Bit-Datenverarbeitung

Unterstützt Hyper Transport 3.0 und 64-Bit-Datenverarbeitung

Unterstützt Hyper Transport 3.0

FSB

Unterstützt HyperTransport 3.0 mit einer

Bandbreite von bis zu 5.2 GT/s

Chipsatz

Super E/A

Arbeitsspeich er

IDE

AMD 770

AMD SB700 / SB710

ITE IT8718F

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller

"Smart Guardian"-Funktion von ITE

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterstützt

256MB/512MB/1GB/2GB/4GB DDR2.

Max. 16GB Arbeitsspeicher

Dual-Kanal DDR2 Speichermodul

Unterstützt DDR2 533 / 667 / 800

Unterstützt DDR2 1066 (by AM2+/AM3 CPU) registrierte DIMMs. ECC DIMMs werden nicht unterstützt.

AMD SB700 / SB710

Ultra DMA 33 / 66 / 100 / 133 Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

Unterstützt HyperTransport 3.0 mit einer

Bandbreite von bis zu 5.2 GT/s

AMD 790X

AMD SB750

ITE IT8718F

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller

"Smart Guardian"-Funktion von ITE

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterstützt

256MB/512MB/1GB/2GB/4GB DDR2.

Max. 16GB Arbeitsspeicher

Dual-Kanal DDR2 Speichermodul

Unterstützt DDR2 533 / 667 / 800

Unterstützt DDR2 1066 (by AM2+/AM3 CPU) registrierte DIMMs. ECC DIMMs werden nicht unterstützt.

AMD SB750

Ultra DMA 33 / 66 / 100 / 133 Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

SATA II

LAN

Audio-Codec

AMD SB700 / SB710

Datentransferrate bis zu 3Gb/s

AMD SB750

Datentransferrate bis zu 3Gb/s

Konform mit der SATA-Spezifikation Version 2.0. Konform mit der SATA-Spezifikation Version 2.0.

Unterstützt RAID 0,1,1+0 Unterstützt RAID 0,1,5,1+0

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

ALC662

5.1-Kanal-Audioausgabe

Unterstützt High-Definition Audio

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

ALC662

5.1-Kanal-Audioausgabe

Unterstützt High-Definition Audio

46

Steckplätze

TA770E/TA770XE

PCI Steckplatz x3


PCI Steckplatz

TA790XE x3

PCI Express Gen2 x16 Steckplatz x1




Diskettenlaufwerkanschluss x1 Diskettenlaufwerkanschluss x1

Onboard-Ans chluss

S/PDIF Ausgangsanschluss

"CMOS löschen"-Sockel

Serieller Anschluss

Rückseiten-E

/A

Stromanschluss (4-polig)

PS/2-Tastatur

PS/2-Maus x1

Platinengröße 220mm (B) X 305 mm (L)

OS-Unterstüt zung


Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu entfernen. x1 x1 x1 x1 x1

S/PDIF Ausgangsanschluss

"CMOS löschen"-Sockel

Serieller Anschluss

Stromanschluss (4-polig)

PS/2-Tastatur

PS/2-Maus x1

220mm (B) X 305 mm (L)


Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu entfernen. x1 x1 x1 x1 x1

47


UC

F

RENCH

Bus frontal

TA770E/TA770XE TA790XE

Socket AM2+

Processeurs AMD Athlon 64 / Athlon 64 FX /

Socket AM2+

Processeurs AMD Athlon 64 / Athlon 64 FX /

Athlon 64 X2 / Sempron / Phenom / Phenom II Athlon 64 X2 / Sempron / Phenom / Phenom II

L'architecture AMD 64 permet le calcul 32 et 64 bits

Prend en charge Hyper Transport 3.0

L'architecture AMD 64 permet le calcul 32 et 64 bits

Prend en charge Hyper Transport 3.0

Prend en charge Hyper Transport 3.0 jusqu'à une Prend en charge Hyper Transport 3.0 jusqu'à une bande passante de 5.2 GT/s bande passante de 5.2 GT/s

Chipset

Super E/S

Mémoire principale

IDE

AMD 770

AMD SB700 / SB710

ITE IT8718F

Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

AMD 790X

AMD SB750

ITE IT8718F

Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Fentes DDR2 DIMM x 4 Fentes DDR2 DIMM x 4

Chaque DIMM prend en charge des DDR2 de 256 Chaque DIMM prend en charge des DDR2 de 256

Mo/512 Mo/1 Go/2 Go/4 Go

Capacité mémoire maximale de 16 Go

Mo/512 Mo/1 Go/2 Go/4 Go

Capacité mémoire maximale de 16 Go

Module de mémoire DDR2 à mode à double voie Module de mémoire DDR2 à mode à double voie

Prend en charge la DDR2 533 / 667 / 800 Prend en charge la DDR2 533 / 667 / 800

Prend en charge la DDR2 1066 (by AM2+/AM3

CPU)

Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge

Prend en charge la DDR2 1066 (by AM2+/AM3

CPU)

Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge


Mode principale de Bus Ultra DMA 33 / 66 / 100 / Mode principale de Bus Ultra DMA 33 / 66 / 100 /

133

Prend en charge le mode PIO 0~4,

133

Prend en charge le mode PIO 0~4,

SATA II

AMD SB700 / SB710

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

Prise en charge RAID 0,1,1+0

Realtek RTL 8111DL

AMD SB750

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

Prise en charge RAID 0,1,5,1+0

Realtek RTL 8111DL

LAN 10 / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique

Half / Full duplex capability Half / Full duplex capability

ALC662

Codec audio Sortie audio à 5.1 voies

Prise en charge de l'audio haute définition

ALC662

Sortie audio à 5.1 voies

Prise en charge de l'audio haute définition

48

Fentes

Fente PCI

TA770E/TA770XE

Fente PCI Express Gen2 x16

Fente PCI Express Gen2 x1 x3 x1 x2

Connecteur de disquette x1

Connecteur de Port d'imprimante x1

Connecteur IDE

Connecteur SATA x1 x6

Connecteur embarqué

Connecteur du panneau avant x1

Connecteur Audio du panneau avant x1

Connecteur d'entrée CD

Connecteur de sortie S/PDIF x1 x1

Embase de ventilateur UC

Embase de ventilateur système x1 x2

Embase d'effacement CMOS

Connecteur USB x1 x3

Connecteur de Port série x1

Connecteur d'alimentation(24 broches) x1

E/S du panneau arrière


Clavier PS/2 x1

Souris PS/2

Port LAN

Port USB

Fiche audio

Dimensions de la carte

220mm (l) X 305 mm (H) x1 x1 x6 x3


Fente PCI

TA790XE



Connecteur de disquette x3 x1 x2

Connecteur de Port d'imprimante x1

Connecteur IDE

Connecteur SATA

Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB

220mm (l) X 305 mm (H) x1 x1 x6

Connecteur du panneau avant x1

Connecteur Audio du panneau avant x1

Connecteur d'entrée CD

Connecteur de sortie S/PDIF x1 x1 x1 x2 x1 x3

Connecteur de Port série x1



Clavier PS/2 x1

Souris PS/2

Port LAN

Port USB

Fiche audio x1 x1 x6 x3


Support SE Biostar se réserve le droit d'ajouter ou de


Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis.

49


I

TALIAN

CPU

FSB

Chipset

Super I/O

Memoria principale

IDE

SATA II

LAN

Codec audio

TA770E/TA770XE

Socket AM2+

Processori AMD Athlon 64 / Athlon 64 FX /

Athlon 64 X2 / Sempron / Phenom /

Phenom II

L’architettura AMD 64 abilita la computazione 32 e 64 bit

Supporto di Hyper Transport 3.0

Supporto di HyperTransport 3.0 fino a 5.2

GT/s di larghezza di banda

AMD 770

AMD SB700 / SB710

ITE IT8718F

Fornisce le funzionalità legacy Super I/O usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Controller velocità ventolina

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR2 x 4

Ciascun DIMM supporta DDR2

256MB/512MB/1GB/2GB/4GB

Capacità massima della memoria 16GB

Modulo di memoria DDR2 a canale doppio

Supporto di DDR2 533 / 667 / 800

Supporto di DDR2 1066 (by AM2+/AM3

CPU)

DIMM registrati e DIMM ECC non sono supportati

AMD SB700 / SB710

Modalità Bus Master Ultra DMA 33 / 66 /

100 / 133

Supporto modalità PIO Mode 0-4

AMD SB700 / SB710

Velocità di trasferimento dei dati fino a 3

Gb/s.

Compatibile specifiche SATA Versione 2.0.

Supporto RAID 0,1,1+0

Realtek RTL 8111DL

Negoziazione automatica 10 / 100 / 1000

Mb/s

Capacità Half / Full Duplex

ALC662

Uscita audio 5.1 canali

Supporto audio High-Definition (HD)

TA790XE

Socket AM2+

Processori AMD Athlon 64 / Athlon 64 FX /

Athlon 64 X2 / Sempron / Phenom /

Phenom II

L’architettura AMD 64 abilita la computazione 32 e 64 bit

Supporto di Hyper Transport 3.0

Supporto di HyperTransport 3.0 fino a 5.2

GT/s di larghezza di banda

AMD 790X

AMD SB750

ITE IT8718F

Fornisce le funzionalità legacy Super I/O usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Controller velocità ventolina

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR2 x 4

Ciascun DIMM supporta DDR2

256MB/512MB/1GB/2GB/4GB

Capacità massima della memoria 16GB

Modulo di memoria DDR2 a canale doppio

Supporto di DDR2 533 / 667 / 800

Supporto di DDR2 1066 (by AM2+/AM3

CPU)

DIMM registrati e DIMM ECC non sono supportati

AMD SB750

Modalità Bus Master Ultra DMA 33 / 66 /

100 / 133

Supporto modalità PIO Mode 0-4

AMD SB750

Velocità di trasferimento dei dati fino a 3

Gb/s.

Compatibile specifiche SATA Versione 2.0.

Supporto RAID 0,1,5,1+0

Realtek RTL 8111DL

Negoziazione automatica 10 / 100 / 1000

Mb/s

Capacità Half / Full Duplex

ALC662

Uscita audio 5.1 canali

Supporto audio High-Definition (HD)

50

TA770E/TA770XE

Alloggi

Alloggio PCI x3

Alloggio PCI Express Gen2 x16 x1


Connettore floppy

Connettore IDE x1 x1

Connettore SATA x6

Connettore pannello frontale x1

Connettore audio frontale

Connettore CD-in

Connettori Connettore output S/PDIF su scheda Collettore ventolina CPU x1 x1 x1 x1

Collettore ventolina sistema x2

Collettore cancellazione CMOS x1

Connettore USB

Connettore Porta seriale x3 x1

Connettore alimentazione(24 pin) x1



Alloggio PCI

TA790XE x3



Connettore floppy

Connettore IDE x1 x1

Connettore SATA x6

Connettore pannello frontale x1

Connettore audio frontale

Connettore CD-in x1 x1

Connettore output S/PDIF

Collettore ventolina CPU x1 x1

Collettore ventolina sistema x2

Collettore cancellazione CMOS x1

Connettore USB

Connettore Porta seriale x3 x1



Tastiera PS/2

I/O pannello

Mouse PS/2

Porta LAN posteriore Porta USB

Connettore audio

Dimension i scheda x1 x1 x1 x6 x3

Tastiera PS/2

Mouse PS/2

Porta LAN

Porta USB

Connettore audio x1 x1 x1 x6 x3

220mm (larghezza) x 305 mm (altezza) 220mm (larghezza) x 305 mm (altezza)

Sistemi operativi supportati


Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso.


Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso.

51


S

PANISH

TA770E/TA770XE

Conector AM2+

TA790XE

Conector AM2+

Procesadores AMD Athlon 64 / Athlon 64 FX /

Athlon 64 X2 / Sempron / Phenom / Phenom II

Procesadores AMD Athlon 64 / Athlon 64 FX /


CPU

FSB

La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de

32 y 64 bits

Soporta las tecnologías Hyper Transport 3.0

32 y 64 bits

Soporta las tecnologías Hyper Transport 3.0

Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s

Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s

Conjunto de AMD 770 chips AMD SB700 / SB710

ITE IT8718F

Le ofrece las funcionalidades heredadas de uso más común Súper E/S.

Súper E/S

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de ITE

Memoria principal

IDE

SATA II

Red Local

Códecs de sonido

AMD 790X

AMD SB750

ITE IT8718F

Le ofrece las funcionalidades heredadas de uso más común Súper E/S.

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR2 x 4

Cada DIMM admite DDR de

256MB/512MB/1GB/2GB/ 4GB

Capacidad máxima de memoria de 16GB

Módulo de memoria DDR2 de canal Doble

Ranuras DIMM DDR2 x 4

Cada DIMM admite DDR de

256MB/512MB/1GB/2GB/ 4GB

Capacidad máxima de memoria de 16GB

Módulo de memoria DDR2 de canal Doble

Admite DDR2 de 533 / 667 / 800

Admite DDR2 de 1066 (by AM2+/AM3 CPU)

No admite DIMM registrados o DIMM compatibles con ECC

Admite DDR2 de 533 / 667 / 800

Admite DDR2 de 1066 (by AM2+/AM3 CPU)

No admite DIMM registrados o DIMM compatibles con ECC


Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133

Soporte los Modos PIO 0~4, Soporte los Modos PIO 0~4,

AMD SB700 / SB710

Tasas de transferencia de hasta 3 Gb/s.

Compatible con la versión SATA 2.0.

Admite RAID 0,1,1+0

Realtek RTL 8111DL

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

ALC662

Salida de sonido de 5.1 canales

Soporte de sonido de Alta Definición

AMD SB750

Tasas de transferencia de hasta 3 Gb/s.

Compatible con la versión SATA 2.0.

Admite RAID 0,1,5,1+0

Realtek RTL 8111DL

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

ALC662

Salida de sonido de 5.1 canales

Soporte de sonido de Alta Definición

52

TA770E/TA770XE

Ranuras

Conectores en placa

Ranura PCI

Ranura PCI Express Gen2 x16


Conector disco flexible

Conector IDE

Conector SATA

Conector de panel frontal

Conector de sonido frontal

Conector de entrada de CD

Conector de salida S/PDIF

X1

X1

Cabecera de ventilador de CPU X1

Cabecera de ventilador de sistema X2

Cabecera de borrado de CMOS

Conector USB

X1

X3

Connettore Porta seriale x1

Conector de alimentación(24 patillas) X1


X1

X6

X1

X1

X3

X1

X2

X1

Panel trasero de

E/S

Teclado PS/2

Ratón PS/2

Puerto de red local

Puerto USB

Conector de sonido

Tamaño de la placa

220mm. (A) X 305 mm. (H)

X1

X1

X1

X6

X3


TA790XE

Ranura PCI



Conector disco flexible

Conector IDE

Conector SATA

Conector de panel frontal

Conector de sonido frontal

Conector de entrada de CD

Conector de salida S/PDIF

X1

X1

Cabecera de ventilador de CPU X1

Cabecera de ventilador de sistema X2

Cabecera de borrado de CMOS

Conector USB

X1

X3

Connettore Porta seriale x1



X1

X6

X1

X1

X3

X1

X2

X1

Teclado PS/2

Ratón PS/2

Puerto de red local

Puerto USB

Conector de sonido

X1

X1

X1

X6

X3

220mm. (A) X 305 mm. (H)

Soporte de sistema operativo


Biostar se reserva el derecho de añadir o retirar


Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.

53


P

ORTUGUESE

CPU

TA770E/TA770XE TA790XE

Socket AM2+ Socket AM2+

Processadores AMD Athlon 64 / Athlon 64 FX /


Processadores AMD Athlon 64 / Athlon 64 FX /


A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma computação de 32 e 64 bits de 32 e 64 bits

FSB

Chipset

Suporta as tecnologias Hyper Transport 3.0

Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.2 GT/s

AMD 770

AMD SB700 / SB710

ITE IT8718F

Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.

Especificaçã Interface LPC (Low Pin Count). o Super I/O Iniciativas para controlo do ambiente

Monitorização do hardware

Controlador da velocidade da ventoinha

Função "Smart Guardian" da ITE

Memória principal

Ranhuras DIMM DDR2 x 4

Cada módulo DIMM suporta uma memória

DDR2 de 256MB/512MB/ 1GB/2GB/4GB

Capacidade máxima de memória: 16GB

Módulo de memória DDR2 de canal duplo

Suporta módulos DDR2 533 / 667 / 800

Suporta módulos DDR2 1066 (by AM2+/AM3

IDE

SATA II

Suporta as tecnologias Hyper Transport 3.0

Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.2 GT/s

AMD 790X

AMD SB750

ITE IT8718F

Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.

Interface LPC (Low Pin Count).

Iniciativas para controlo do ambiente

Monitorização do hardware

Controlador da velocidade da ventoinha

Função "Smart Guardian" da ITE

Ranhuras DIMM DDR2 x 4

Cada módulo DIMM suporta uma memória

DDR2 de 256MB/512MB/ 1GB/2GB/4GB

Capacidade máxima de memória: 16GB

Módulo de memória DDR2 de canal duplo

Suporta módulos DDR2 533 / 667 / 800

Suporta módulos DDR2 1066 (by AM2+/AM3

CPU)

Os módulos DIMM registados e os DIMM ECC não são suportados

CPU)

Os módulos DIMM registados e os DIMM ECC não são suportados


Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133

Suporta o modo PIO 0~4, Suporta o modo PIO 0~4,


Velocidades de transmissão de dados até 3 Gb/s. Velocidades de transmissão de dados até 3 Gb/s.

Compatibilidade com a especificação SATA versão 2.0.

Compatibilidade com a especificação SATA versão 2.0.

LAN

Codec de som

Suporta as funções RAID 0,1,1+0

Realtek RTL 8111DL

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

ALC662

Saída de áudio de 5.1 canais

Suporta a especificação High-Definition Audio

Suporta as funções RAID 0,1,5,1+0

Realtek RTL 8111DL

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

ALC662

Saída de áudio de 5.1 canais

Suporta a especificação High-Definition Audio

54

Ranhuras

Ranhura PCI

TA770E/TA770XE

Ranhura PCI Express Gen2 x16

Ranhura PCI Express Gen2 x1 x3 x1 x2

Conectores na placa

Entradas/S aídas no painel traseiro

Conector da unidade de disquetes x1

Conector IDE x1

Conector SATA

Conector do painel frontal x6 x1

Conector de áudio frontal

Conector para entrada de CDs

Conector de saída S/PDIF

Conector da ventoinha da CPU x1 x1 x1 x1

Conector da ventoinha do sistema x2

Conector para limpeza do CMOS x1

Conector USB

Conector da Porta série x3 x1

Conector de alimentação (24 pinos) x1


Teclado PS/2

Rato PS/2 x1 x1

Porta LAN

Porta USB

Tomada de áudio x1 x6 x3

Tamanho da placa

220mm (L) X 305 mm (A)

Sistemas operativos suportados


A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio.


TA790XE

Ranhura PCI

Ranhura PCI Express Gen2 x16

Ranhura PCI Express Gen2 x1 x3 x1 x2

Conector da unidade de disquetes x1

Conector IDE x1

Conector SATA

Conector do painel frontal x6 x1

Conector de áudio frontal

Conector para entrada de CDs

Conector de saída S/PDIF

Conector da ventoinha da CPU x1 x1 x1 x1

Conector da ventoinha do sistema x2

Conector para limpeza do CMOS x1

Conector USB

Conector da Porta série x3 x1



Teclado PS/2

Rato PS/2 x1 x1

Porta LAN

Porta USB

Tomada de áudio x1 x6 x3

220mm (L) X 305 mm (A)


A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio.

55


IDE

P

OLISH

Procesor

FSB

Chipset

Pamięć główna

Super I/O

SATA II

LAN

Kodek dźwiękowy

TA770E/TA770XE

Socket AM2+


Sempron / Phenom / Phenom II Procesory

Architektura AMD 64 umożliwia przetwarzanie

32 i 64 bitowe

Obsługa Hyper Transport 3.0

TA790XE

Socket AM2+


Sempron / Phenom / Phenom II Procesory

Architektura AMD 64 umożliwia przetwarzanie

32 i 64 bitowe

Obsługa Hyper Transport 3.0

Obsługa HyperTransport 3.0 o szerokości pasma Obsługa HyperTransport 3.0 o szerokości pasma do 5.2 GT/s

AMD 770

AMD SB700 / SB710 do 5.2 GT/s

AMD 790X

AMD SB750

Gniazda DDR2 DIMM x 4 Gniazda DDR2 DIMM x 4

Każde gniazdo DIMM obsługuje moduły

256MB/512MB/1GB/2GB/4GB DDR2

Maks. wielkość pamięci 16GB

Moduł pamięci DDR2 z trybem podwójnego kanału

Obsługa DDR2 533 / 667 / 800

Obsługa DDR2 1066 (by AM2+/AM3 CPU)

Brak obsługi Registered DIMM oraz ECC DIMM

ITE IT8718F

Każde gniazdo DIMM obsługuje moduły

256MB/512MB/1GB/2GB/4GB DDR2

Maks. wielkość pamięci 16GB

Moduł pamięci DDR2 z trybem podwójnego kanału

Obsługa DDR2 533 / 667 / 800

Obsługa DDR2 1066 (by AM2+/AM3 CPU)

Brak obsługi Registered DIMM oraz ECC DIMM

ITE IT8718F

Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler prędkości wentylatora

Funkcja ITE "Smart Guardian"

Monitor H/W

Kontroler prędkości wentylatora

Funkcja ITE "Smart Guardian"

AMD SB700 / SB710

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsługa PIO tryb 0~4,

AMD SB750

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsługa PIO tryb 0~4,

AMD SB700 / SB710

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Obsługa RAID 0,1,1+0

Realtek RTL 8111DL

AMD SB750

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Obsługa RAID 0,1,5,1+0

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s z automatyczną negocjacją 10 / 100 / 1000 Mb/s z automatyczną negocjacją szybkości

Działanie w trybie połowicznego/pełnego dupleksu szybkości

Działanie w trybie połowicznego/pełnego dupleksu

ALC662

5.1 kanałowe wyjście audio

Obsługa High-Definition Audio

ALC662

5.1 kanałowe wyjście audio

Obsługa High-Definition Audio

56


Gniazda

Back Panel

I/O

TA770E/TA770XE

Gniazdo PCI

Gniazdo PCI Express Gen2 x16

Gniazdo PCI Express Gen2 x1 x3 x1 x2

TA790XE

Gniazdo PCI

Gniazdo PCI Express Gen2 x16

Gniazdo PCI Express Gen2 x1 x3 x1 x2

Złącze napędu dyskietek

Złącze IDE

Złącze SATA

Złącze panela przedniego x1 x1 x6 x1

Przednie złącze audio x1

Złącze wejścia CD x1

Złącza Złącze wyjścia S/PDIF x1 wbudowane Złącze główkowe wentylatora procesora x1

Złącze napędu dyskietek

Złącze IDE

Złącze SATA

Złącze panela przedniego x1 x1 x6 x1

Przednie złącze audio

Złącze wejścia CD x1 x1

Złącze wyjścia S/PDIF x1

Złącze główkowe wentylatora procesora x1

Złącze główkowe wentylatora systemowego x2 Złącze główkowe wentylatora systemowego x2

Złącze główkowe kasowania CMOS x1 Złącze główkowe kasowania CMOS x1

Złącze USB

Złącze Port szeregowy x3 x1

Złącze USB

Złącze Port szeregowy x3 x1

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe) x1 x1

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe) x1 x1

Klawiatura PS/2

Mysz PS/2

Port LAN

Port USB

Gniazdo audio x1 x1 x1 x6 x3

Klawiatura PS/2

Mysz PS/2

Port LAN

Port USB

Gniazdo audio x1 x1 x1 x6 x3

Wymiary płyty

Obsluga systemu operacyjne go

220mm (S) X 305 mm (W)


Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.

220mm (S) X 305 mm (W)


Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.

57


R

USSIAN

TA770E/TA770XE

CPU

(центральн

Гнездо AM2+

Процессоры AMD Athlon 64 / Athlon 64 FX /

Athlon 64 X2 / Sempron / Phenom / Phenom II ый Архитектура AMD 64 разрешать обработка процессор) данных на 32 и 64 бит

Поддержка Hyper Transport 3.0

TA790XE

Гнездо AM2+

Процессоры AMD Athlon 64 / Athlon 64 FX /


Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит

Поддержка Hyper Transport 3.0

FSB

Набор микросхем

Поддержка HyperTransport 3.0 с пропускной способностью до 5.2 GT/s

AMD 770

AMD SB700 / SB710

Слоты DDR2 DIMM x 4

Основная память

Каждый модуль DIMM поддерживает

256МБ/512МБ/1 ГБ /2 ГБ/4 ГБ DDR2

Максимальная ёмкость памяти 16ГБ

Модуль памяти с двухканальным режимом

DDR2

Super I/O

IDE

SATA II

Локальная сеть

Звуковой кодек

Поддержка HyperTransport 3.0 с пропускной способностью до 5.2 GT/s

AMD 790X

AMD SB750

Слоты DDR2 DIMM x 4

Каждый модуль DIMM поддерживает

256МБ/512МБ/1 ГБ /2 ГБ/4 ГБ DDR2

Максимальная ёмкость памяти 16ГБ

Модуль памяти с двухканальным режимом

DDR2

Поддержка DDR2 533 / 667 / 800

Поддержка DDR2 1066 (by AM2+/AM3 CPU)

Не поддерживает зарегистрированные модули DIMM and ECC DIMM

ITE IT8718F

Обеспечивает наиболее используемые действующие функциональные возможности

Super I/O.

Интерфейс с низким количеством выводов

Инициативы по охране окружающей среды,

Поддержка DDR2 533 / 667 / 800

Поддержка DDR2 1066 (by AM2+/AM3 CPU)

Не поддерживает зарегистрированные модули DIMM and ECC DIMM

ITE IT8718F

Обеспечивает наиболее используемые действующие функциональные возможности

Super I/O.

Интерфейс с низким количеством выводов

Инициативы по охране окружающей среды,

Аппаратный монитор

Регулятор скорости

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

Аппаратный монитор

Регулятор скорости

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

AMD SB700 / SB710

Режим "хозяина" шины Ultra DMA 33 / 66 / 100 Режим "хозяина" шины Ultra DMA 33 / 66 / 100

/ 133

AMD SB750

/ 133

Поддержка режима PIO 0~4, Поддержка режима PIO 0~4,

AMD SB700 / SB710 скорость передачи данных до 3 гигабит/с.

AMD SB750 скорость передачи данных до 3 гигабит/с.

Соответствие спецификации SATA версия 2.0. Соответствие спецификации SATA версия 2.0.

Поддержка RAID 0,1,1+0 Поддержка RAID 0,1,5,1+0

Realtek RTL 8111DL Realtek RTL 8111DL

Автоматическое согласование 10 / 100 / 1000 Автоматическое согласование 10 / 100 / 1000

Мб/с Мб/с

Частичная / полная дуплексная способность

ALC662

Звуковая поддержка High-Definition

5.1канальный звуковой выход

Частичная / полная дуплексная способность

ALC662

Звуковая поддержка High-Definition

5.1канальный звуковой выход

58

Слоты

TA770E/TA770XE

Слот PCI

Слот PCI Express Gen2 x16

Слот PCI Express Gen2 x1 x3 x1 x2


TA790XE

Слот PCI

Слот PCI Express Gen2 x16

Слот PCI Express Gen2 x1 x3 x1 x2

Встроенны й разъём

Разъём IDE

Разъём SATA x1 x6

Разъём IDE

Разъём SATA x1 x6

Разъём на лицевой панели x1 Разъём на лицевой панели x1

Входной звуковой разъём x1 Входной звуковой разъём x1

Разъём ввода для CD

Разъём вывода для S/PDIF

Контактирующее приспособление вентилятора центрального процессора x1

Контактирующее приспособление x1 x1

Разъём ввода для CD

Разъём вывода для S/PDIF

Контактирующее приспособление x1 x1 вентилятора центрального процессора x1

Контактирующее приспособление

Открытое контактирующее приспособление CMOS x1

Открытое контактирующее приспособление CMOS x1

Задняя панель средств ввода-выв ода

Разъём Последовательный порт x1 Разъём Последовательный порт x1

Разъем питания (24 вывод) x1 Разъем питания (24 вывод) x1

Разъем питания (4 вывод) x1 Разъем питания (4 вывод) x1

Клавиатура PS/2

Мышь PS/2

Порт LAN x1 x1 x1

Гнездо для подключения наушников x3

Размер панели


Поддержка Biostar сохраняет за собой право добавлять

OS или удалять средства обеспечения для OS с или без предварительного уведомления.

Клавиатура PS/2

Мышь PS/2

Порт LAN

Гнездо для подключения наушников x3

Windows XP / Vista 32 / Vista 64 x1 x1 x1

Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или без предварительного уведомления.

59


A

RABIC

TA790XE TA770E/TA770XE

ﺲﺒﻘﻡAM2+

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyperTransport 3.0

ﻰﻟإ ﻞﺼﻳ ددﺮﺘﺏ 5.2 GT/s ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyperTransport 3.0

ﻰﻟإ ﻞﺼﻳ ددﺮﺘﺏ

ﺲﺒﻘﻡAM2+

تﺎﺠﻟﺎﻌﻡAMD Athlon 64 / Athlon 64 FX / Athlon 64 تﺎﺠﻟﺎﻌﻡAMD Athlon 64 / Athlon 64 FX / Athlon 64

X2 / Sempron / Phenom / Phenom II X2 / Sempron / Phenom / Phenom II

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺖﺏ 64 و 32 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ

ﺪﺗ 3.0

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺖﺏ 64 و 32 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyper Transport و

5.2 GT/s

ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو

ﺔﻳﺰآﺮﻤﻟا

ﻲﺒﻥﺎﺠﻟا ﻲﻡﺎﻡﻷا ﻞﻗﺎﻨﻟا

AMD 790X

AMD SB750

AMD 770

AMD SB700 / SB710

ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻡ

4 دﺪﻋ DDR2 DIMM ﺔﺤﺘﻓ

DIMM DDR2 ﺔﻌﺳ

4 دﺪﻋ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻡ ةﺮآاذ ﻢﻋﺪﺗ DDR2 ﺔﻌﺳ 256/512 ﺎﺠﻴﻡ

DDR2 DIMM ﺔﺤﺘﻓ

DIMM DDR2 ﺔﻌﺳ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻡ ةﺮآاذ ﻢﻋﺪﺗ DDR2 ﺔﻌﺳ 256/512 ﺎﺠﻴﻡ

ﺖﻳﺎﺏ ﺎﺠﻴﺝ 16 ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ ﺖﻳﺎﺏ ﺎﺠﻴﺝ 4 و / 2 و / 1 و ﺖﻳﺎﺏ ﺖﻳﺎﺏ ﺎﺠﻴﺝ 16 ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ ﺖﻳﺎﺏ ﺎﺠﻴﺝ 4 و / 2 و / 1 و ﺖﻳﺎﺏ

عﻮﻥ ﻦﻡ ةﺮآاﺬﻟا ﻢﻋﺪﺗ

ةﺪﺣو ةﺎﻨﻘﻟا ﺔﺝودﺰﻡ

تﺎﻌﺳ 800/667/533 ﺖﻳﺎﺏ ﺎﺠﻴﻡ

ةﺪﺣو ةﺎﻨﻘﻟا ﺔﺝودﺰﻡ ﺔﻴﺴﻴﺋﺮﻟا ةﺮآاﺬﻟا

عﻮﻥ ﻦﻡ ةﺮآاﺬﻟا ﻢﻋﺪﺗ تﺎﻌﺳ 800/667/533 ﺖﻳﺎﺏ ﺎﺠﻴﻡ

عﻮﻥ ﻦﻡ ةﺮآاﺬﻟا ﻢﻋﺪﺗ

ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻ

تﺎﻌﺳ 1066(By AM2+/AM3

CPU) ﺖﻳﺎﺏ ﺎﺠﻴﻡ

عﻮﻥ ﻦﻡ ةﺮآاﺬﻟا ﻢﻋﺪﺗ تﺎﻌﺳ 1066(By AM2+/AM3

CPU) ﺖﻳﺎﺏ ﺎﺠﻴﻡ

ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻ

ITE IT8718F

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎﻡاﺪﺨﺘﺳا ﺮﺜآﻷا

ﺔﻴﻨﻘﺗ ﻢﻋﺪ ﺗ Low Pin Count Interface

: ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو

ITE IT8718F

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ﻡاﺪﺨﺘﺳا ﺮﺜآﻷا

ﺔﻴﻨﻘﺗ ﻢﻋﺪ ﺗ Low Pin Count Interface

: ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو Super I/O

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻡ

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻡ ITE

AMD SB750

ﺔﻴﻨﻘﺘﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133

ﻲﺴﻴﺋر ﻊﺿو

ﻊﺿو ﻢﻋدPIO Mode 0~4

AMD SB750

.

ﺔﻴﻥﺎﺙ / ﺖﺏﺎﺠﻴﺝ 3 ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺏﺎﻄﻡSATA راﺪﺹﻹا 2.0.

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗRAID 0,1,5,1+0

Realtek RTL 8111DL

ﺔﻴﻧﺎﺛ / ﺖﺑ ﺎﺠﻴﺝ 1 و ﺔﻴﻧﺎﺛ / ﺖیﺎﺑ ﺎﺠﻴﻣ 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ

ﻲﻔﺼﻨﻝا / ﻞﻣﺎﻜﻝا جودﺰﻤﻝا ﻞﻘﻨﻝا ﺔﻴﻧﺎﻜﻣإ

ALC662

ةﺰﻬﺝﻷا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡ

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻡ

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻡ ITE

AMD SB700 / SB710

ﺔﻴﻨﻘﺘﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133

ﻲﺴﻴﺋر ﻊﺿو

ﻊﺿو ﻢﻋدPIO Mode 0~4

AMD SB700 / SB710

.

ﺔﻴﻥﺎﺙ / ﺖﺏﺎﺠﻴﺝ 3 ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺏﺎﻄﻡSATA راﺪﺹﻹا 2.0.

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗRAID 0,1,1+0

Realtek RTL 8111DL

ﺔﻴﻧﺎﺛ / ﺖﺑ ﺎﺠﻴﺝ 1 و ﺔﻴﻧﺎﺛ / ﺖیﺎﺑ ﺎﺠﻴﻣ 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ

ﻲﻔﺼﻨﻝا / ﻞﻣﺎﻜﻝا جودﺰﻤﻝا ﻞﻘﻨﻝا ﺔﻴﻧﺎﻜﻣإ

ALC662

IDE ﺬﻔﻨﻡ

SATA II

ﺔﻴﻠﺥاد ﺔﻜﺒﺵ

ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗ

تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ 5.1

ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴ ﻨﻘﺗ ﻢﻋﺪﺗ

تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ 5.1

تﻮﺼﻟا ﻚﻳدﻮآ

60

3 ﺪﻋ

1

2

دﺪﻋ

دﺪﻋ

TA790XE

PCI Express

PCI

Gen2 x16

PCI Express Gen2 x1

ﺔﺤﺘﻓ

ﺔﺤﺘﻓ

ﺔﺤﺘﻓ

1 دﺪﻋ

1 دﺪﻋ

6 دﺪﻋ

ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ

IDE ﺬﻔﻨﻡ

1 دﺪﻋ

1

1 دﺪﻋ

1

دﺪﻋ

دﺪﻋ

SATA ﺬﻔﻨﻡ

ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ

ﻲﻡﺎﻡ ﻷا تﻮﺼﻟا ﺬﻔﻨﻡ

CD-IN ﺬﻔﻨﻡ

S/PDIF جﺮﺥ ﺬﻔﻨﻡ

1 دﺪﻋ ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو

2 ﺪﻋ

1 دﺪﻋ

3 دﺪﻋ

مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو

CMOS ﺢﺴﻡ ﺔﻠﺹو

USB ﺬﻔﻨﻡ

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻡ 1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

(

(

سﻮﺏد 24

ﺲﻴﺏﺎﺏد 4

)

)

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ

1 دﺪﻋ

1 دﺪﻋ

1 ﺪﻋ

6

3

دﺪﻋ

دﺪﻋ

PS/2 ﺢﻴﺗﺎﻔﻡ ﺔﺣﻮﻟ

PS/2

USB

سوﺎﻡ

ﺔﻴﻠﺤﻡ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻡ

ﺬﻓﺎﻨﻡ

تﻮﺹ ﺲﺒﻘﻡ

( عﺎﻔ ﺗرا ) ﻢﻡ 305 X ( ضﺮﻋ ) ﻢﻡ 220


ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

.

رﺎﻄﺥإ نوﺪﺏ


3

2

TA770E/TA770XE

ﺪﻋ

1 دﺪﻋ

دﺪﻋ

PCI Express Gen2 x16 ﺔﺤﺘﻓ

PCI Express

PCI ﺔﺤﺘﻓ

Gen2 x1 ﺔﺤﺘﻓ

1 دﺪﻋ

1 دﺪﻋ

6 دﺪﻋ

ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ

IDE

SATA

ﺬﻔﻨﻡ

ﺬﻔﻨﻡ

1

1

دﺪﻋ

دﺪﻋ

ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ

ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ

CD-IN ﺬﻔﻨﻡ 1 دﺪﻋ

1 دﺪﻋ S/PDIF جﺮﺥ ﺬﻔﻨﻡ

1 دﺪﻋ ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو

2

1

ﺪﻋ

دﺪﻋ

3 دﺪﻋ

مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو

CMOS ﺢﺴﻡ ﺔﻠﺹو

1

1

1

دﺪﻋ

دﺪﻋ

دﺪﻋ

USB ﺬﻔﻨﻡ

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻡ

( سﻮﺏد 24 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ

( ﺲﻴﺏﺎﺏد 4 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻡ

1 دﺪﻋ

1 دﺪﻋ

1 ﺪﻋ

6

3

دﺪﻋ

دﺪﻋ

PS/2

ﺔﻴﻠﺤﻡ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻡ

PS/2

ﺢﻴﺗﺎﻔ ﻡ ﺔﺣﻮﻟ

USB

سوﺎﻡ

ﺬﻓﺎﻨﻡ

تﻮﺹ ﺲﺒﻘﻡ

( عﺎﻔﺗرا ) ﻢﻡ 305 X ( ضﺮﻋ ) ﻢﻡ 220


ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

.

رﺎﻄﺥإ نوﺪﺏ

تﺎﺤﺘﻔﻟا

ﺢﻄﺳ ﻰﻠﻋ ﺬﻓﺎﻨﻤﻟا

ﺔﺣﻮﻠﻟا

جﺮﺥ / ﻞﺥد ﺬﻓﺎﻨﻡ

ﺔﻴﻔﻠﺨﻟا ﺔﺣﻮﻠﻟا

ﺔﺣﻮﻠﻟا ﻢﺠﺣ

ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻥأ ﻢﻋد

61


J

APANESE

TA770E/TA770XE TA790XE

CPU

Socket AM2+


Sempron / Phenom / Phenom II プロセッサ Sempron / Phenom / Phenom II プロセッサ

AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計

算が可能です

ハイパートランスポート

3.0サポートします

Socket AM2+


算が可能です

ハイパートランスポート

3.0サポートします

FSB

5.2 GT/sのバンド幅までハイパートランスポート3.0

をサポートします

チップセット

AMD 770

AMD SB700 / SB710

DDR2 DIMMスロット x 4

各 DIMMは 256MB/512MB/1GB/2GB/4GB

DDR2をサポート

メインメモリ

最大メモリ容量 16GB

デュアル

チャンネルモードDDR2メモリモジュール

Super I/O

DDR2 533 / 667 / 800をサポート

DDR2 1066をサポート (by AM2+/AM3 CPU)

登録済み DIMMとECC DIMMはサポートされません

ITE IT8718F

もっとも一般に使用されるレガシー Super I/O機能を

採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ / モニター

ITEの「スマートガーディアン」機能

5.2 GT/sのバンド幅までハイパートランスポート3.0

をサポートします

AMD 790X

AMD SB750

H/Wモニター

DDR2 DIMMスロット x 4

各 DIMMは 256MB/512MB/1GB/2GB/4GB

DDR2をサポート

最大メモリ容量 16GB

デュアル

チャンネルモードDDR2メモリモジュール

DDR2 533 / 667 / 800をサポート

DDR2 1066をサポート (by AM2+/AM3 CPU)

登録済み DIMMとECC DIMMはサポートされません

ITE IT8718F

もっとも一般に使用されるレガシー

採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

ファン速度コントローラ / モニター

Super I/O機能を

ITEの「スマートガーディアン」機能

IDE

SATA II

LAN

サウンド

Codec

AMD SB700 / SB710

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

PIO Mode 0~4のサポート、

AMD SB700 / SB710

最高 3 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

RAID 0,1,1+0のサポート

Realtek RTL 8111DL

10 / 100 / 1000 Mb/秒のオートネゴシエーション

半 /全二重機能

ALC662

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

AMD SB750

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

PIO Mode 0~4のサポート、

AMD SB750

最高 3 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

RAID 0,1,5,1+0のサポート

Realtek RTL 8111DL

10 / 100 / 1000 Mb/秒のオートネゴシエーション

半 /全二重機能

ALC662

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

62

TA770E/TA770XE


TA790XE

スロット

PCI Express Gen2 x16スロット

PCI Express Gen2 x1スロット x1 x2

PCI Express Gen2 x16スロット x1

PCI Express Gen2 x1スロット x2

フロッピーコネクタ

x1 x1

フロントパネルコネクタ x1 x1

フロントオーディオコネクタ x1 フロントオーディオコネクタ x1

オンボードコ S/PDIFアウトコネクタ

ネクタ x1 S/PDIFアウトコネクタ x1

システムファンヘッダ x2 x2

背面パネル

I/O

シリアルポートコネクタ x1 x1

電源コネクタ

(24ピン)

電源コネクタ

(4ピン) x1 x1

電源コネクタ

電源コネクタ

(24ピン)

(4ピン) x1 x1

PS/2キーボード

PS/2マウス x1 x1

PS/2キーボード

PS/2マウス x1 x1

オーディオジャック

x3 x3

ボードサイズ 220mm (幅) X 305 mm (高さ)

OSサポート


Biostarは事前のサポートなしにOSサポートを追加ま

たは削除する権利を留保します。

220mm (幅) X 305 mm (高さ)


Biostarは事前のサポートなしにOSサポートを追加ま

たは削除する権利を留保します。

2009/04/20

63

Biostar TA770 E, XE, TA790 XE Motherboard Setup Manual

Assistant Bot

FCC Information and Copyright

EFORE

OU

TART

ACKAGE

HECKLIST

OTHERBOARD

EATURES

EAR

ANEL

ONNECTORS

OTHERBOARD

AYOUT

NSTALLING

ENTRAL

ROCESSING

NIT

EADERS

CPU_FAN1: CPU Fan Header

SYS_FAN1: NorthBridge Fan Header

SYS_FAN2: System Fan Header

NSTALLING

YSTEM

EMORY

A. DDR2 Modules

B. Memory Capacity

C. Dual Channel Memory installation

ONNECTORS AND

LOTS

FDD1: Floppy Disk Connector

IDE1: Hard Disk Connector

SATA1~SATA6: Serial ATA Connectors

AUXPWR1: Auxiliary Power for Graphics

ATXPWR1: ATX Power Source Connector

ATXPWR2: ATX Power Source Connector

PEX16_1: PCI-Express Gen2 x16 Slot

PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slots

PCI1~PCI3: Peripheral Component Interconnect Slots

OW TO

ETUP

UMPERS

ETAIL

ETTINGS

PANEL1: Front Panel Header

JCMOS1: Clear CMOS Header

Clear CMOS Procedures:

F_USB1~F_USB3: Headers for USB 2.0 Ports at Front Panel

F_AUDIO1: Front Panel Audio Header

SPDIF1: Digital Audio-out Connector

CD_IN1: CD-ROM Audio-in Connector

JCOM1: Serial port Connector

JUSBV1: Power Source Headers for Rear USB Ports

JUSBV2: Power Source Headers for Front USB Ports

On-Board LED Indicators

On-Board Buttons

PERATING

YSTEM

AID

RRAYS

OW

ORKS

RAID 0:

RAID 1:

RAID 1+0:

RAID 5: (TA790XE Only)

ERIES

T-Series BIOS Features

!! WARNING !!

A. Overclocking Navigator Engine (O.N.E.)

Manual Overclock System (M.O.S.)

NOTE

Automatic Overclock System (A.O.S.)

B. Memory Integration Test (M.I.T.)

C. BIO-Flasher

D. Self Recovery System (S.R.S.)

E. Smart Fan Function

F. CMOS Reloading Program

ERIES