Biostar T-Series TA785G3, TA780G3, TA760G3 Motherboard Setup Manual

TA785G3/TA780G3/TA760G3 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ............................................................ 1

1.1 Before You Start ................................................................................ 1

1.2

1.3

Package Checklist ............................................................................. 1

Motherboard Features...................................................................... 2

1.4

1.5

Rear Panel Connectors ..................................................................... 2

Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation ............................................. 5

2.1

2.2

2.3

Installing Central Processing Unit (CPU)....................................... 5

FAN Headers...................................................................................... 7

Installing System Memory................................................................ 8

2.4 Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup ..................................... 13

3.1 How to Setup Jumpers .................................................................... 13

3.2 Detail Settings.................................................................................. 13

Chapter 4: Hybrid CrossFireX Function................................... 18

4.1 Hybrid CrossFireX Requirements.................................................. 18

4.2 Hybrid CrossFireX Installation....................................................... 18

Chapter 5: RAID Functions ..................................................... 19

5.1

5.2

Operating System............................................................................ 19

Raid Arrays ...................................................................................... 19

5.3 How RAID Works............................................................................. 19

Chapter 6: T-Series BIOS & Software ..................................... 22

6.1 T-Series BIOS..................................................................................... 22

6.2 T-Series Software ............................................................................. 30

Chapter 7: Useful Help ............................................................ 40

7.1

7.2

Driver Installation Note.................................................................. 40

Extra Information............................................................................ 41

7.3

7.4

AMI BIOS Beep Code....................................................................... 42

Troubleshooting............................................................................... 43

Appendix: SPEC In Other Languages ...................................... 44

German.................................................................................................................. 44

French .................................................................................................................... 46

Italian..................................................................................................................... 48

Spanish ................................................................................................................... 50

Portuguese ............................................................................................................ 52

Polish...................................................................................................................... 54

Russian ................................................................................................................... 56

Arabic..................................................................................................................... 58

Japanese ................................................................................................................ 60

TA785G3/TA780G3/TA760G3

CHAPTER 1: INTRODUCTION

1.1 B

EFORE

Y

OU

S

TART

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with sufficient lighting.

Always disconnect the computer from power outlet before operation.

Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.

Keep the computer from dangerous area, such as heat source, humid air and water

The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 P

ACKAGE

C

HECKLIST

IDE Cable X 1 (optional)

Serial ATA Cable X 3

Serial ATA Power Cable X 1

Rear I/O Panel for ATX Case X 1

User’s Manual X 1

Fully Setup Driver CD X 1

FDD Cable X 1 (optional)

USB 2.0 Cable X1 (optional)

S/PDIF out Cable X 1 (optional)

DVI to HDMI Dongle X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

1

Motherboard Manual

2

1.3 M

OTHERBOARD

F

EATURES

CPU

TA780G3/TA760G3

Socket AM3

AMD Athlon II / Phenom II processors

Socket AM3

TA785G3

AMD Athlon II / Phenom II processors

AMD 64 Architecture enables 32 and 64 bit computing

AMD 64 Architecture enables 32 and 64 bit computing

Supports Hyper Transport 3.0 and Cool=n=Quiet Supports Hyper Transport 3.0 and Cool=n=Quiet

(Maximum Watt: 125W) (Maximum Watt: 125W)

FSB

Chipset

Super I/O

Main

Memory

Graphics

IDE

SATA II

LAN

Sound

Support HyperTransport 3.0

Supports up to 5.2 GT/s Bandwidth

AMD 780G / 760G

AMD SB710

Support HyperTransport 3.0

Supports up to 4.4 GT/s Bandwidth

AMD 785G

AMD SB710

ITE 8718F ITE 8718F

Provides the most commonly used legacy Super Provides the most commonly used legacy Super

I/O functionality

Low Pin Count Interface

Environment Control initiatives

H/W Monitor

I/O functionality

Low Pin Count Interface

Environment Control initiatives

H/W Monitor

ITE's "Smart Guardian" function

DDR3 DIMM Slots x 2

Max Memory Capacity 8GB

Each DIMM supports 512MB/1GB/2GB/

4GB DDR3

Dual Channel Mode DDR3 memory module

Supports DDR3 800 / 1066 / 1333

Supports DDR3 1600 (OC)

Registered DIMM and ECC DIMM is not supported

ITE's "Smart Guardian" function

DDR3 DIMM Slots x 2

Max Memory Capacity 8GB

Each DIMM supports 512MB/1GB/2GB/

4GB DDR3

Dual Channel Mode DDR3 memory module

Supports DDR3 800 / 1066 / 1333

Supports DDR3 1600 (OC)

Registered DIMM and ECC DIMM is not supported

Integrated in AMD 780G / 760G Chipset

Max Shared Video Memory is 512MB

DX10/HDCP (780G ONLY) support

Integrated in AMD 785G Chipset

Max Shared Video Memory is 512MB

DX10.1/HDCP support

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode supports PIO Mode 0~4,

Integrated IDE Controller supports PIO Mode 0~4,

Integrated Serial ATA Controller

Data transfer rates up to 3 Gb/s

SATA Version 2.0 specification compliant

Realtek RTL 8111DL

10 / 100 /1000 Mb/s auto negotiation

Half / Full duplex capability

ALC662

5.1 channels audio out

High Definition Audio

Integrated Serial ATA Controller

Data transfer rates up to 3 Gb/s

SATA Version 2.0 specification compliant

Realtek RTL 8111DL

10 / 100 /1000 Mb/s auto negotiation


ALC662

5.1 channels audio out

High Definition Audio

Slots

On Board

Connector

Back Panel

I/O

TA780G3/TA760G3

PCI Express Gen2 x16 slot

PCI slot x1 x2

Floppy Connector

IDE Connector

SATA Connector

Front Panel Connector

Front Audio Connector

S/PDIF Out Connector

CPU Fan Header x1 x1 x4 x1 x1 x1 x1

System Fan Header

CMOS clear Header

USB Connector

Power Connector (24pin)


Serial port Connector

PS/2 Keyboard

PS/2 Mouse

DVI port

VGA port

LAN port

USB Port

Audio Jack

Board Size 209 mm(W) x 244 mm(L)

Special

Features

RAID 0 / 1 / 1+0 support

Windows XP / Vista / 7

OS Support Biostar reserves the right to add or remove support for any OS With or without notice. x1 x1 x1 x1 x1 x4 x3 x2 x1 x2 x1 x1 x1

1.4 R

EAR

P

ANEL

C

ONNECTORS

TA785G3/TA780G3/TA760G3

TA785G3

PCI Express Gen2 x16 slot

PCI slot

Floppy Connector

IDE Connector

SATA Connector

Front Panel Connector

Front Audio Connector

S/PDIF Out Connector

CPU Fan Header

System Fan Header

CMOS clear Header

USB Connector



Serial port Connector

PS/2 Keyboard

PS/2 Mouse

DVI port

VGA port

LAN port

USB Port

Audio Jack

209 mm(W) x 244 mm(L) x2 x1 x2 x1 x1 x1 x1 x1 x1 x1 x1 x2 x1 x1 x4 x1 x1 x1 x1 x1 x4 x3

RAID 0 / 1 / 1+0 support


Biostar reserves the right to add or remove support for any OS With or without notice.

PS/2

Mouse

LAN

Line In/

Surround

Line Out

Mic In 1/

Bass/ Center

PS/2

Keyboard

VGA DVI-D USBX2 USBX2

3


1.5 M

OTHERBOARD

L

AYOUT

KBMS1

ATXPWR2

CPU_FAN1

ATXPWR1

4

USB1

RJ45USB1

JUSBV1

BAT1

AUDIO1

JSPDIFOUT1

AMD

780G/

760G/

785G

LAN

Super I/O

SYS_FAN2

PEX16_1

PCI1

AMD

SB710

PCI2

F_AUDIO1

Codec

J_COM1

FDD1

Note: represents the 1 st pin.

SATA2

JUSBV2

SW_RST1

SYS_FAN1

F_USB1 F_USB2 LED1 LED2

SATA1

PANEL1

SATA4

SATA3

BIOS

JCMOS1

PH1

PH2

PH3

TA785G3/TA780G3/TA760G3

CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING

C

ENTRAL

P

ROCESSING

U

NIT

(CPU)

Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle.

Step 2: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only in the correct orientation.

5


Step 3: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to CPU_FAN1 to complete the installation.

6

TA785G3/TA780G3/TA760G3

2.2 FAN H

EADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

1 4

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

Fan

Control (By Fan)

SYS_FAN1: NorthBridge Fan Header

SYS_FAN2: System Fan Header

SYS_ FAN2

1 3

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

SYS_FAN1

Note:

CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

7


2.3 I

NSTALLING

S

YSTEM

M

EMORY

A. DDR3 Modules

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

8

2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

DDR3 Module

TA785G3/TA780G3/TA760G3

B. Memory Capacity

DIMM Socket

Location

Total Memory

Size

DIMMB1 512MB/1GB/2GB/4GB

C. Dual Channel Memory installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DIMMA1 DIMMB1

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or x16)

9


2.4 C

ONNECTORS AND

S

LOTS

FDD1: Floppy Disk Connector

The motherboard provides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk types.

2 34

1 33

IDE1: IDE/ATAPI Connector

The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode

0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.

40 39

10

2 1

SATA1~SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

SATA4

SATA3

SATA2

SATA1

Pin Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

7 Ground

7 4 1

TA785G3/TA780G3/TA760G3

ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX power supply.

12 24

Pin Assignment

13 +3.3V

14 -12V

15 Ground

16 PS_ON

17 Ground

18 Ground

19 Ground

20 NC

21 +5V

22 +5V

23 +5V

24 Ground

1 13

Pin Assignment

1 +3.3V

2 +3.3V

3 Ground

4 +5V

5 Ground

6 +5V

7 Ground

8 PW_OK

10 +12V

11 +12V

12 +3.3V

ATXPWR2: ATX Power Source Connector

Connecting this connector will provide +12V to CPU power circuit.

2 1

3 4

Pin Assignment

1 +12V

2 +12V

3 Ground

4 Ground

Note:

Before power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in.

11


PEX16_1: PCI-Express Gen2 x16 Slot

-

-

-

-

PCI-Express 2.0 compliant.

Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally.

PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

2X bandwidth over the PCI-Express 1.1 architecture.

12

PE X1 6_ 1

PCI1/PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands for

Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

TA785G3/TA780G3/TA760G3

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO

S

ETUP

J

UMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

3.2 D

ETAIL

S

ETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

9

1

PWR_LED

On/Off

+ + -

+ -

16

8

SPK

HLED

RST

Pin Assignment Function Function

1 +5V

2 N/A

3 N/A

4 Speaker

Speaker

Connector

9 N/A

10 N/A

11 N/A

12 Power LED (+)

N/A

N/A

5

6

HDD LED (+)

HDD LED (-)

7 Ground

Hard drive

LED

Reset button

13

14

Power LED (+)

Power LED (-)

16 Ground

Power LED

Power-on button

13


JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.

1 3

Pin 1-2 Close:

Normal Operation

(default).

1 3

Pin 2-3 Close:

Clear CMOS data.

1 3

※

Clear CMOS Procedures:

1.

2.

3.

4.

5.

6.

Remove AC power line.

Set the jumper to “Pin 2-3 close”.

Wait for five seconds.

Set the jumper to “Pin 1-2 close”.

Power on the AC.

Reset your desired password or clear the CMOS data.

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.

Pin Assignment

F_USB1 F_ USB2

2 1 0

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

10 NC

1 9

14

TA785G3/TA780G3/TA760G3

JUSBV1/JUSBV2: Power Source Headers for USB Ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at USB1/RJ45USB1.

JUSBV2: +5V for USB ports at F_USB1/F_USB2.

Pin 2-3 Close:

JUSBV1: +5V STB for USB ports at USB1/RJ45USB1.

JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.

1 3

Pin 1-2 close

JUSBV1

3

1

1 3

1 3

Pin 2-3 close

JUSBV2

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable.

Pin

1

Assignment

Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

2

1

10

9

8 Key

9 Left line in

15


JSPDIFOUT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

3

Pin Assignment

1 +5V

2 SPDIF_OUT

3 Ground

1

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment

2

1

4 Data terminal ready

10

7

8

Request to send

Clear to send

10 NC

9

16

TA785G3/TA780G3/TA760G3

On-Board LED Indicators

There are 6 LED indicators showing system status.

PH2

PH3

LED1 LED2

LED1 & LED2: Debug Indicators

PH1 ~ PH4: Power Status Indicators

Please refer to the tables below for specific messages:

LED1 LED2 Message

OFF OFF

PH1~PH3

Abnormal: CPU / Chipset error.

Phase Indicator

On-Board Buttons

There are 2 on-board buttons.

SW_RST1: Reset button.

SW_PWR1: Power Switch button.

SW_PWR1

SW_RST1

17


CHAPTER 4: HYBRID CROSSFIREX FUNCTION

4.1 H

YBRID

C

ROSS

F

IRE

X R

EQUIREMENTS

A graphics card with Radeon HD3450/HD3470 GPU.

The graphics card driver should support Hybrid CrossFireX technology.

The power supply unit must provide at least the minimum power required by the system, or the system will be unstable. A power supply above 450W is recommended under Hybrid CrossFireX mode.

4.2 H

YBRID

C

ROSS

F

IRE

X I

NSTALLATION

Step 1: Insert the Hybrid CrossFireX-Ready graphics card into PEX16_1.

R adeon HD 3450

R adeon HD 3470

PEX16_1

Notice: Make sure the graphics card is seated into slot completely.

Step 2: In the graphics card configuration program, choose “Hybrid

CrossFireX” function. Installation completes.

NOTE

For more detail information of Hybrid CrossFireX function, please visit following web-sites: http://game.amd.com/us-en/crossfirex_hybrid.aspx

http://ati.amd.com/technology/hybridgraphics/index.html

18

TA785G3/TA780G3/TA760G3

CHAPTER 5: RAID FUNCTIONS

5.1 O

PERATING

S

YSTEM

Supports Windows XP and Windows VISTA.

5.2 R

AID

A

RRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications.

RAID 1: RAID 1 defines techniques for mirroring data.

RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1.

RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.

5.3 H

OW

RAID W

ORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.

Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance.

Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity.

Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost.

Fault Tolerance: No.

Block 1

Block 3

Block 5

Block 2

Block 4

Block 6

19


RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.


Drives: Minimum 2, and maximum is 2.

Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity.

Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive.

Drawbacks: Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

Fault Tolerance: Yes.

Block 1

Block 2

Block 3

Block 1

Block 2

Block 3

20

TA785G3/TA780G3/TA760G3

RAID 1+0:

RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved resiliency, performance and rebuild performance.


Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.

Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.

Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1.

Fault Tolerance: Yes.

Block 1

Block 3

Block 5

Block 1

Block 3

Block 5

Block 2

Block 4

Block 6

Block 2

Block 4

Block 6

21


CHAPTER 6: T-SERIES BIOS & SOFTWARE

6.1 T-S

ERIES

BIOS

T-Series BIOS Features

Overclocking Navigator Engine (O.N.E.)

Memory Integration Test (M.I.T., under Overclock Navigator Engine)

BIO-Flasher: Update BIOS file from USB Flash Drive or FDD

Self Recovery System (S.R.S)

Smart Fan Function

CMOS Reloading Program

!! WARNING !!

For better system performance, the BIOS firmware is being continuously updated. The BIOS information described below in this manual is for your reference only and the actual BIOS information and settings on board may be different from this manual. For further information of setting up the BIOS, please refer to the BIOS Manual in the Setup CD.

A. Overclocking Navigator Engine (O.N.E.)

ONE provides two powerful overclocking engines: MOS and AOS for both

Elite and Casual overclockers.

Main Advanced

T-Series Settings

WARNING:

PCIPnP

BIOS SETUP UTILITY

Boot Chipset

Please Clear CMOS if system no display after overclocking.

T-Series

OverClock Navigator [Normal]

=========== Automate OverClock System ===========

Auto OverClock System [V6-Tech Engine]

============ Manual OverClock System ============

CPU/HT Reference Clock (MHz) [200]

CPU Configuration [Auto]

> G.P.U Phase Control

> CPU Tuning

> Clock Control

> Voltage Configuation

> DRAM Timing Configuration

> Memory Configuration

Integrated Memory Test [Disabled]

Options

Normal

Automate OverClock

Manual OverClock

+-

F1

F10

ESC

Exit

Select Screen

Select Item

Change Option

General Help

Save and Exit

Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

22

TA785G3/TA780G3/TA760G3

Manual Overclock System (M.O.S.)

MOS is designed for experienced overclock users.

It allows users to customize personal overclock settings.

Main Advanced PCIPnP


Boot Chipset T-Series


WARNING: Please Clear CMOS if system no display after overclocking.








> CPU Tuning

Options

Normal



> Clock Control





Exit

Options

Normal



+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


↓

Advanced PCIPnP


Boot Chipset T-Series Exit Main



OverClock Navigator [Manual OverClock]







> CPU Tuning

> Clock Control





Options

Normal



+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


CPU/HT Reference Clock (MHz)

CPU Frequency is directly in proportion to system performance. To maintain the system stability, CPU voltage needs to be increased also when raising CPU frequency.

CPU Configuration

This item provides several fixed modes of CPU configuration.

G.P.U Phase Control

Enter this function for more power saving settings.

CPU Tuning

Enter this function for more advanced CPU settings.

23


Clock Control

Enter this function for more clock settings.

Voltage Configuration

Enter this function for more advanced voltage settings.

DRAM Timing Configuration

Enter this function for more advanced DRAM clock settings.

Memory Configuration

Enter this function for more advanced memory settings.

NOTE

Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users. Therefore, we will not be responsible for any hardware damage which may be caused by overclocking. We also would not guarantee any overclocking performance.

Automatic Overclock System (A.O.S.)

For beginners in overclock field, BET had developed an easy, fast, and powerful feature to increase the system performance, named A.O.S.

Based on many tests and experiments, A.O.S. provides 3 ideal overclock configurations that are able to raise the system performance in a single step.



Boot Chipset T-Series










> CPU Tuning

Options

Normal



> Clock Control





Exit

Options

Normal



+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


24

TA785G3/TA780G3/TA760G3

V6 Tech Engine

This engine will make a good over-clock performance.



Boot Chipset T-Series Exit



OverClock Navigator [Automate OverClock]







> CPU Tuning

> Clock Control





Options

V6-Tech Engine

V8-Tech Engine

V12-Tech Engine

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


V8 Tech Engine

This engine will make a better over-clock performance.













> CPU Tuning

> Clock Control





Options

V6-Tech Engine

V8-Tech Engine

V12-Tech Engine

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


V12 Tech Engine

This engine will make a best over-clock performance.













> CPU Tuning

> Clock Control





Options

V6-Tech Engine

V8-Tech Engine

V12-Tech Engine

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


25


Notices:

Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model.

B. Memory Integration Test (M.I.T.)

This function is under “Overclocking Navigator Engine” item.

MIT allows users to test memory compatibilities, and no extra devices or software are needed.

Step 1

The default setting under this item is “Disabled”; the condition parameter should be changed to “Enable” to proceed this test.













> CPU Tuning

> Clock Control





Options

Enabled

Disabled

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


↓

Advanced PCIPnP


Boot Chipset T-Series Exit Main










> CPU Tuning

> Clock Control




Integrated Memory Test [Enabled]

Options

Enabled

Disabled

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


Step 2

Save and Exit from CMOS setup and reboot the system to activate this test.

Run this test for 5 minutes (minimum) to ensure the memory stability.

Step 3

When the process is done, change the setting back from “Enable” to “Disable” to complete the test.

26

TA785G3/TA780G3/TA760G3

C. BIO-Flasher

BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk.

The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>

during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the

USB port or the floppy disk drive.

4. Power on or reset the computer and then press <F12> during the POST process.

A select dialog as the picture on the right appears.

Select the device contains the BIOS file and press <Enter> to enter the utility.

5. The utility will show the BIOS files and their respective information. Select the proper

BIOS file and press <Enter> then <Y> to perform the BIOS update process.

6. After the update process, the utility will ask you to reboot the system.

Press <Y> to proceed. BIOS update completes. z This utility only allows storage device with FAT32/16 format and single partition. z Shutting down or resetting the system while updating the BIOS will lead to system boot failure.

27


D. Self Recovery System (S.R.S.)

This function can’t be seen under BIOS setup; and is always on whenever the system starts up.

However, it can prevent system hang-up due to inappropriate overclock actions.

When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured.

E. Smart Fan Function

Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.

This is a brilliant feature to control CPU/System Temperature vs. Fan speed.

When enabling Smart Fan function, Fan speed is controlled automatically by

CPU/System temperature.

This function will protect CPU/System from overheat problem and maintain the system temperature at a safe level.




Advanced Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

> CPU Configuration

> SuperIO Configuration

> Smart Fan Configuration

> Hardware Health Configuration

> Power Configuration

> USB Configuration

Enter

F1

F10

ESC

Select Screen

Select Item

Go to Sub Screen

General Help

Save and Exit


↓


Advanced

Smart Fan Configuration

CPU Smart Fan [Disabled]

Smart Fan Calibration

Control Mode

Fan Ctrl OFF( C)

Fan Ctrl On( C)

Fan Ctrl Start value

Fan Ctrl Sensitive

When you choice [Auto]

,[3Pin] or [4Pin], please run the calibration to define the Fan parameters for

Smart Fan control

+-

F1

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit


28

TA785G3/TA780G3/TA760G3

Smart Fan Calibration

Choose this item and then the BIOS will automatically test and detect the

CPU/System fan functions and show CPU/System fan speed.

Control Mode

This item provides several operation modes of the fan.

Fan Ctrl OFF(℃)

If the CPU/System temperature is lower than the set value, the CPU/

System fan will turn off. The range is from 0~127, with an interval of 1.

Fan Ctrl On(℃)

The CPU/System fan starts to work when CPU/System temperature arrives to this set value. The range is from 0~127, with an interval of 1.

Fan Ctrl Start Value

When CPU/System temperature arrives to the set value, the CPU/System fan will work under Smart Fan Function mode. The range is from 0~127, with an interval of 1.

Fan Ctrl Sensitive

Increasing the value of slope PWM will raise the speed of CPU/System fan.

The range is from 1~127, with an interval of 1.

F. CMOS Reloading Program

It allows users to save different CMOS settings into BIOS-ROM.

Users are able to reload any saved CMOS setting for customizing system configurations. Moreover, users are able to save an ideal overclock setting during overclock operation.

There are 10 sets of record addresses in total, and users are able to name the

CMOS data according to personal preference.




Exit Options

Save Changes and Exit

Discard Changes and Exit

Discard Changes

Load Optimal Defaults

CMOS Backup Function

CMOS Backup Func

CMOS Data

CMOS Data

Reload

Save

Security Settings

> Security

Enter

F1

F10

ESC

Select Screen

Select Item

Go to Sub Screen

General Help

Save and Exit


29


6.2 T-S

ERIES

S

OFTWARE

Installing T-Series Software

1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. title.

3. Follow the on-screen instructions to complete the installation.

Launching T-Series Software

After the installation process, you will see the software icon “T-Utility

OverClock III” / “HW Monitor” / “eHOT Line” / “Tseries BIOS Update” appears on the desktop. Double-click the icon to launch T-Series utility.

OverClock 3

OverClock 3 is equipped with f riendly interface and solid over-clock features , and it will help you easily do over-clocking under windows environment.

Double-click the desktop icon, OverClock 3 will be launched; the first window you will see is Main Panel. In this panel you will see current CPU Speed and

CPU/Memory/PCI-E/PCI Clock.

Open

Over Clock

Panel

30

Open a saved setting/

Save current settings

Open

About Panel

Open

Over Voltage

Panel

ON/OFF

Over Clock Panel

Restore Default Settings

AUTO Over-Clock

V3/V6/V9 Engine

Real-time Over-clock

TA785G3/TA780G3/TA760G3

Manual Adjust CPU Clock

Test & Apply Manual Settings

AUTO

User can click this button and the utility will set the best and stable performance and frequency automatically. A warning dialog as below will show up to notify you that the system may become unstable, click on “OK” to continue.

31


Then the utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, launch the utility again and the utility will load the previously verified best and stable frequency.

V3 / V6 / V9

Provide user the ability to do real-time over-clock adjustment. For beginners in over-clock field, this is a powerful feature to increase system performance.

V3 Engine

This engine will make a good over-clock performance.

V6 Engine

This engine will make a better over-clock performance.

V9 Engine

This engine will make a best over-clock performance.

TEST

You can also manually adjust CPU clock by pressing +/- button or moving

the level bar. After manually adjust the CPU clock, you should click

TEST button and the utility will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fails, system will do a fail-safe rebooting. After reboot, the utility will restore to the hardware default setting.

Warning

Manually over-clock is potentially dangerous, especially when the over-clocking percentage is over 110 %. We strongly recommend you test every speed you over-clock by click the TEST button. Or, you can just click AUTO over-clock button and let the Utility automatically get the best result for you.

RESET

Click this button and the utility will restore all values to the hardware default setting.

32

Over Voltage Panel

TA785G3/TA780G3/TA760G3

Manual Adjust

CPU/Memory/Chipset/FSB Voltage

CPU Voltage

This function allows user to adjust CPU voltage. Click on “+” to increase or “-“ to decrease the CPU voltage.

Memory Voltage

This function allows user to adjust Memory voltage. Click on “+” to increase or “-“ to decrease the Memory voltage.

Chip Voltage

This function allows user to adjust Chipset voltage. Click on “+” to increase or “-“ to decrease the Chipset voltage.

FSB Voltage

This function allows user to adjust FSB voltage. Click on “+” to increase or “-“ to decrease the FSB voltage.

33


About Panel

In this panel, you can get model name and other system information that may related to over-clocking.

You can also get the version number of this software.

Note

Because the Over Clock and Over

Voltage features are controlled by several separate chipset, the utility divides these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but it will not interfere with other panels’ functions.

This property can make the utility more robust.

Hardware Monitor

HW Monitor is a monitor utility that helps you to maintain the health of the PC.

It provides real-time information of CPU/GPU/System temperature, fan speed, and voltage.

This area shows voltage information

Voltage Panel

This area shows CPU information

Fan Panel

This area shows CPU/System temperature

Turn to Fan Panel

34

This area shows CPU/System fan speed

Turn to Voltage P anel

TA785G3/TA780G3/TA760G3

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our

Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.

Before you use this utility, please set Outlook Express as your default e-mail client application program.

* represent s import ant information that you must provide. Without this informat ion, you may not be able to send out the mail.

This block will show the information which would be collect ed in the mail.

* Describe condition of your system.

* Select your area or the area close to you.

Provide the e-mail address that you would like to send t he copy to.

* Provide the name of the memory module manufacturer.

Send the mail out.

Exit this dialog.

Save these information to a .txt file

Provide the name of the power supply manufacturer and the model no.

After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name.

35


Enter the file name and then click

“Save”. Your system information will be saved to a .txt file.

Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.

We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.

If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application.

Go to the following web http://www.biostar.com.tw/app/en-us/about/contact.php

for getting our contact information.

36

TA785G3/TA780G3/TA760G3

BIOS Update

BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system.

AWARD BIOS

Show current BIOS information

AMI BIOS

Clear CMOS function

(Only for AWARD BIOS)

Save current BIOS to a .bin file

Online Update function

(Only for AMI BIOS)

Update BIOS with a BIOS file

<Backup BIOS>

Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.)

Then click Save.

After the saving process, finish dialog will show. Click on OK to complete the BIOS Backup procedure.

37


<Update BIOS>

Before doing this, please download the proper BIOS file from the website.

For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first.

Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.

After the BIOS Backup procedure, the open dialog will show for requesting the

BIOS file which is going to be updated.

Please choose the proper BIOS file for updating, then click on Open.

The utility will update BIOS with the proper BIOS file, and this process may take minutes. Please do not open any other applications during this process.

After the BIOS Update process, click on

OK to restart the system.

While the system boots up and the full screen logo shows, press key to enter BIOS setup.

<Delete>

In the BIOS setup, use the Load Optimized Defaults function and then Save and

Exit Setup to exit BIOS setup. BIOS Update is completed.

38

TA785G3/TA780G3/TA760G3

<Online Update> (for AMI BIOS only)

Automatically download and update the latest BIOS via internet; make sure

that the computer is connected to the internet before using this function.

After clicking on the Onlinr Update button, the utility will search for the latest BIOS from internet. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed.

If there is no other newer BIOS version, the utility will also tell you that your BIOS has been the latest version.

Download completes; the utility will ask you to program (update) the

BIOS. Click Yes to proceed.

The programing procedure may take minutes, please do not make any operation

during the programing process.

After the updating process, the utility will ask you to reboot the system. Click OK to reboot.

While the system boots up and the full screen logo shows, press key to enter BIOS setup.

<Delete>

In the BIOS setup, use the Load Optimized Defaults function and then Save and

Exit Setup to exit BIOS setup. Online Update is completed.

All the information and content above about the T-Series software are subject to be changed without notice. For better performance, the software is being continuously updated. The information and pictures described above are for your reference only.

The actual information and settings on board may be slightly different from this manual.

39


CHAPTER 7: USEFUL HELP

7.1 D

RIVER

I

NSTALLATION

N

OTE

After you installed your operating system, please insert the Fully Setup

Driver CD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the CD

40

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver

CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from

http://www.adobe.com/products/acrobat/readstep2.html

TA785G3/TA780G3/TA760G3

7.2 E

XTRA

I

NFORMATION

CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

41


7.3 AMI BIOS B

EEP

C

ODE

Boot Block Beep Codes

Number of Beeps

1

2

3

4

5

7

10

11

12

13

Description

No media present. (Insert diskette in floppy drive A:)

“AMIBOOT.ROM” file not found in root directory of diskette in

A:

Insert next diskette if multiple diskettes are used for recovery

Flash Programming successful

File read error

No Flash EPROM detected

Flash Erase error

Flash Program error

“AMIBOOT.ROM” file size error

BIOS ROM image mismatch (file layout does not match image present in flash device)

POST BIOS Beep Codes

Number of Beeps

1

3

6

7

8

Description

Memory refresh timer error

Base memory read/write test error

Keyboard controller BAT command failed

General exception error (processor exception interrupt error)

Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3

6, 7

8

Reseat the memory, or replace with known good modules.

Fatal error indicating a serious problem with the system.

Consult your system manufacturer. Before declaring the motherboard beyond all hope, eliminate the possibility of interference by a malfunctioning add-in card. Remove all expansion cards except the video adapter. z If beep codes are generated when all other expansion cards are absent, consult your system manufacturer’s technical support. z If beep codes are not generated when all other expansion cards are absent, one of the add-in cards is causing the malfunction. Insert the cards back into the system one at a time until the problem happens again. This will reveal the malfunctioning card.

If the system video adapter is an add-in card, replace or reseat the video adapter. If the video adapter is an integrated part of the system board, the board may be faulty.

42

TA785G3/TA780G3/TA760G3

7.4 T

ROUBLESHOOTING

Probable Solution

1. There is no power in the system.

Power LED does not shine; the fan of the power supply does not work

2. Indicator light on keyboard does not shine.

1. Make sure power cable is securely plugged in.

3. Contact technical support.

System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.

System does not boot from a hard disk drive, but can be booted from optical drive.

System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk.

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

1. Back up data and applications files.

2. Reformat the hard drive.

Re-install applications and data using backup disks.

Screen message shows “Invalid

Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure correct information is in setup.

System cannot boot after user installs a second hard drive.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

43


APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

Sockel AM3

TA780G3/TA760G3

CPU

FSB

Chipsatz

TA785G3

Sockel AM3

AMD Athlon II / Phenom II Prozessoren AMD Athlon II / Phenom II Prozessoren

Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bit- und 64-Bit-Datenverarbeitung

Unterstützt Hyper Transport 3.0 und Cool’n’Quiet Unterstützt Hyper Transport 3.0 und Cool’n’Quiet

(Maximales Watt: 125W) und 64-Bit-Datenverarbeitung

(Maximales Watt: 125W)

Unterstützt HyperTransport 3.0 mit einer

Bandbreite von bis zu 5.2 GT/s

AMD 780G / 760G

AMD SB710

ITE8718F

Unterstützt HyperTransport 3.0 mit einer

Bandbreite von bis zu 4.4 GT/s

AMD 785G

AMD SB710

ITE8718F

Super E/A

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

"Smart Guardian"-Funktion von ITE

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

"Smart Guardian"-Funktion von ITE

Arbeitsspeich er

Grafik

IDE

SATA

DDR3 DIMM-Steckplätze x 2

Max. 8GB Arbeitsspeicher

Jeder DIMM unterstützt 512MB/ 1GB/2GB/

4GB DDR3.

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 800 / 1066 / 1333

Unterstützt DDR3 1600 (OC) registrierte DIMMs. ECC DIMMs werden nicht unterstützt.

Integrierter AMD 780G / 760G-Chipsatz

Max. 512MB gemeinsam benutzter

Videospeicher

Unterstützt DX10/HDCP (780G ONLY)

DDR3 DIMM-Steckplätze x 2

Max. 8GB Arbeitsspeicher

Jeder DIMM unterstützt 512MB/ 1GB/2GB/

4GB DDR3.

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 800 / 1066 / 1333

Unterstützt DDR3 1600 (OC) registrierte DIMMs. ECC DIMMs werden nicht unterstützt.

Integrierter AMD 785G-Chipsatz

Max. 512MB gemeinsam benutzter

Videospeicher

Unterstützt DX10.1/HDCP

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 / 133 Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 / 133 Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

Integrierter Serial ATA-Controller

Datentransferrate bis zu 3 Gb/s

Integrierter Serial ATA-Controller

Datentransferrate bis zu 3 Gb/s

Konform mit der SATA-Spezifikation Version 2.0. Konform mit der SATA-Spezifikation Version 2.0.

44

LAN

HD

Audio-Unters tützung

Steckplätze

TA780G3/TA760G3

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

ALC662

5.1-Kanal-Audioausgabe

Unterstützt High-Definition Audio

PCI Express Gen2 x16 Steckplatz x1

TA785G3/TA780G3/TA760G3

TA785G3

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

ALC662

5.1-Kanal-Audioausgabe

Unterstützt High-Definition Audio

PCI Express Gen2 x16 Steckplatz x1

Diskettenlaufwerkanschluss x1 Diskettenlaufwerkanschluss x1

Onboard-Ans

S/PDIF- Ausgangsanschluss chluss

"CMOS löschen"-Sockel x1 x1

S/PDIF- Ausgangsanschluss x1

"CMOS löschen"-Sockel x1

Rückseiten-E

/A

Stromanschluss (4-polig)

Serieller Anschluss

PS/2-Tastatur

PS/2-Maus

VGA-Anschluss x1 x1 x1 x1 x1

Stromanschluss (4-polig)

Serieller Anschluss

PS/2-Tastatur

PS/2-Maus

VGA-Anschluss x1 x1 x1 x1 x1

Platinengröße 209 mm (B) X 244 mm (L)

Sonderfunkti onen

Unterstützt RAID 0 / 1 / 1+0

OS-Unterstüt zung


Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu entfernen.

209 mm (B) X 244 mm (L)

Unterstützt RAID 0 / 1 / 1+0


Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu entfernen.

45


UC

F

RENCH

TA780G3/TA760G3

Socket AM3

Processeurs AMD Athlon II / Phenom II

TA785G3

Socket AM3

Processeurs AMD Athlon II / Phenom II

L'architecture AMD 64 permet le calcul 32 et 64 bits

L'architecture AMD 64 permet le calcul 32 et 64 bits

Bus frontal

Chipset

Prend en charge Hyper Transport 3.0 et

Cool’n’Quiet

Prend en charge Hyper Transport 3.0 et

Cool’n’Quiet

(Watt maximum : 125W) (Watt maximum : 125W)

Prend en charge Hyper Transport 3.0 jusqu'à une Prend en charge Hyper Transport 3.0 jusqu'à une bande passante de 5.2 GT/s

AMD 780G / 760G

AMD SB710 bande passante de 4.4 GT/s

AMD 785G

AMD SB710

Super E/S

Mémoire principale

ITE 8718F

Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Fonction "Gardien intelligent" de l'ITE

ITE 8718F

Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Fonction "Gardien intelligent" de l'ITE

Fentes DDR3 DIMM x 2

Capacité mémoire maximale de 8 Go

Fentes DDR3 DIMM x 2

Capacité mémoire maximale de 8 Go

Chaque DIMM prend en charge des DDR3 de 512 Chaque DIMM prend en charge des DDR3 de 512

Mo et 1Go/2Go/4Go Mo et 1Go/2Go/4Go

Module de mémoire DDR3 à mode à double voie Module de mémoire DDR3 à mode à double voie

Prend en charge la DDR3 800 / 1066 / 1333 Prend en charge la DDR3 800 / 1066 / 1333

Prend en charge la DDR3 1600 (OC)

Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge

Prend en charge la DDR3 1600 (OC)

Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge

IDE

SATA

Integré dans la chipset AMD 780G / 760G

Graphiques Mémoire vidéo partagée maximale de 512 Mo

Prise en charge DX10/HDCP (780G ONLY)

Integré dans la chipset AMD 785G

Mémoire vidéo partagée maximale de 512 Mo

Prise en charge DX10.1/HDCP

Contrôleur IDE intégré

Mode principale de Bus Ultra DMA 33 / 66 / 100 / Mode principale de Bus Ultra DMA 33 / 66 / 100 /

133 133

Prend en charge le mode PIO 0~4,

Contrôleur IDE intégré

Prend en charge le mode PIO 0~4,

Contrôleur Serial ATA intégré

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

Contrôleur Serial ATA intégré

Taux de transfert jusqu'à 3 Go/s.

Conforme à la spécification SATA Version 2.0

46

TA785G3/TA780G3/TA760G3

LAN

Prise en charge audio HD

Fentes

TA780G3/TA760G3 TA785G3

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique


Realtek RTL 8111DL


ALC662

Sortie audio à 5.1 voies

Prise en charge de l'audio haute définition

Fente PCI Express Gen2 x16

Fente PCI

Connecteur de disquette

Connecteur IDE x1 x2 x1 x1

ALC662

Sortie audio à 5.1 voies

Prise en charge de l'audio haute définition

Fente PCI Express Gen2 x16

Fente PCI

Connecteur de disquette

Connecteur IDE x1 x2 x1 x1

Connecteur embarqué

Connecteur SATA

Connecteur du panneau avant x4 x1

Connecteur Audio du panneau avant x1

Connecteur de sortie S/PDIF x1

Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB x1 x2 x1 x2 x1 Connecteur d'alimentation

(24 broches)

Connecteur d'alimentation

(4 broches)

Connecteur de Port série x1 x1

Connecteur SATA

Connecteur du panneau avant x4 x1

Connecteur Audio du panneau avant x1

Connecteur de sortie S/PDIF x1

Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB x1 x2 x1 x2 x1 Connecteur d'alimentation

(24 broches)

Connecteur d'alimentation

(4 broches)

Connecteur de Port série x1 x1

E/S du panneau arrière

Clavier PS/2

Souris PS/2

Port VGA

Port LAN

Port USB

Fiche audio

Port DVI x1 x1 x1 x1 x4 x3 x1

Clavier PS/2

Souris PS/2

Port VGA

Port LAN

Port USB

Fiche audio


Dimensions de la carte

209 mm (l) X 244 mm (H)

Fonctionnali tés spéciales

Prise en charge RAID 0 / 1 / 1+0

209 mm (l) X 244 mm (H)

Prise en charge RAID 0 / 1 / 1+0

Windows XP / Vista / 7 Windows XP / Vista / 7

Support SE Biostar se réserve le droit d'ajouter ou de Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis.

47


I

TALIAN

CPU

TA780G3/TA760G3

Socket AM3

Processori AMD Athlon II / Phenom II

L’architettura AMD 64 abilita la computazione 32 e 64 bit

Supporto di Hyper Transport 3.0 e

Cool’n’Quiet

(Watt massimo: 125W)

FSB

Chipset

Super I/O

Memoria principale

Supporto di HyperTransport 3.0 fino a 5.2

GT/s di larghezza di banda

AMD 780G / 760G

AMD SB710

ITE 8718F

Fornisce le funzionalità legacy Super I/O usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2

Capacità massima della memoria 8GB

Ciascun DIMM supporta DDR3 512MB e

1GB/2GB/4GB

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 800 / 1066 / 1333

Supporto di DDR3 1600 (OC)

DIMM registrati e DIMM ECC non sono supportati

Grafica

IDE

SATA

Integrata nel Chipset AMD 780G / 760G

La memoria video condivisa massima è di

512 MB

Supporto DX10/HDCP (780G ONLY)

Controller IDE integrato

Modalità Bus Master Ultra DMA 33 / 66 /

100 / 133

Supporto modalità PIO Mode 0-4

Controller Serial ATA integrato

Velocità di trasferimento dei dati fino a 3

Gb/s.

Compatibile specifiche SATA Versione 2.0.

TA785G3

Socket AM3

Processori AMD Athlon II / Phenom II

L’architettura AMD 64 abilita la computazione 32 e 64 bit

Supporto di Hyper Transport 3.0 e

Cool’n’Quiet

(Watt massimo: 125W)

Supporto di HyperTransport 3.0 fino a 4.4

GT/s di larghezza di banda

AMD 785G

AMD SB710

ITE 8718F

Fornisce le funzionalità legacy Super I/O usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2

Capacità massima della memoria 8GB

Ciascun DIMM supporta DDR3 512MB e

1GB/2GB/4GB

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 800 / 1066 / 1333

Supporto di DDR3 1600 (OC)

DIMM registrati e DIMM ECC non sono supportati

Integrata nel Chipset AMD 785G

La memoria video condivisa massima è di

512 MB

Supporto DX10.1/HDCP

Controller IDE integrato

Modalità Bus Master Ultra DMA 33 / 66 /

100 / 133

Supporto modalità PIO Mode 0-4

Controller Serial ATA integrato

Velocità di trasferimento dei dati fino a 3

Gb/s.

Compatibile specifiche SATA Versione 2.0.

48

TA785G3/TA780G3/TA760G3

LAN

Supporto audio HD

Alloggi

TA780G3/TA760G3

Realtek RTL 8111DL

TA785G3

Realtek RTL 8111DL

Negoziazione automatica 10 / 100 / 1000 Mb/s Negoziazione automatica 10 / 100 / 1000 Mb/s

Capacità Half / Full Duplex Capacità Half / Full Duplex

ALC662

Uscita audio 5.1 canali

Supporto audio High-Definition (HD)

Alloggio PCI Express Gen2 x16 x1

Alloggio PCI x2

ALC662

Uscita audio 5.1 canali

Supporto audio High-Definition (HD)

Alloggio PCI Express Gen2 x16 x1

Alloggio PCI x2

Connettore floppy

Connettore IDE x1 x1

Connettore SATA x4

Connettore pannello frontale x1

Connettore audio frontale

Connettore output SPDIF x1 x1

Connettori su scheda

Collettore ventolina CPU

Collettore ventolina sistema x1 x2

Collettore cancellazione CMOS x1

Connettore USB

Connettore alimentazione

(24 pin)

Connettore alimentazione x2 x1 x1

(4 pin)

Connettore Porta seriale

Tastiera PS/2

Mouse PS/2

I/O pannello

Porta VGA

Porta LAN posteriore Porta USB

Connettore audio

Porta DVI x1 x4 x3 x1 x1 x1 x1 x1

Connettore floppy

Connettore IDE x1 x1

Connettore SATA x4

Connettore pannello frontale x1

Connettore audio frontale

Connettore output SPDIF

Collettore ventolina CPU

Collettore ventolina sistema x1 x1 x1 x2

Collettore cancellazione CMOS x1

Connettore USB x2

Connettore alimentazione

(24 pin) x1 x1 Connettore alimentazione

(4 pin)

Connettore Porta seriale

Tastiera PS/2

Mouse PS/2

Porta VGA

Porta LAN

Porta USB x1 x1 x1 x1

Connettore audio

Porta DVI x1 x4 x3 x1

Dimension i scheda

209 mm (larghezza) x 244 mm (altezza) 209 mm (larghezza) x 244 mm (altezza)

Caratterist iche speciali

Supporto RAID 0 / 1 / 1+0

Sistemi operativi supportati


Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso.

Supporto RAID 0 / 1 / 1+0


Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso.

49


S

PANISH

TA780G3/TA760G3

Conector AM3

TA785G3

Conector AM3

Procesadores AMD Athlon II / Phenom II Procesadores AMD Athlon II / Phenom II

La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de

CPU 32 y 64 bits

Soporta las tecnologías Hyper Transport 3.0 y

32 y 64 bits

Soporta las tecnologías Hyper Transport 3.0 y

Cool’n’Quiet

(Vatio máximo: 125W)

Cool’n’Quiet

(Vatio máximo: 125W)

FSB

Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s

Conjunto de AMD 780G / 760G chips AMD SB710

Súper E/S

ITE 8718F

Le ofrece las funcionalidades heredadas de uso más común Súper E/S.

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Memoria principal

Monitor hardware

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 8GB

Cada DIMM admite DDR de 512MB y

1GB/2GB/4GB

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 800 / 1066 / 1333

Admite DDR3 de 1600 (OC)

No admite DIMM registrados o DIMM compatibles con ECC

Gráficos

IDE

SATA

Admite HyperTransport 3.0 con un ancho de banda de hasta 4.4 GT/s

AMD 785G

AMD SB710

ITE 8718F

Le ofrece las funcionalidades heredadas de uso más común Súper E/S.

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Monitor hardware

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 8GB

Cada DIMM admite DDR de 512MB y

1GB/2GB/4GB

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 800 / 1066 / 1333

Admite DDR3 de 1600 (OC)

No admite DIMM registrados o DIMM compatibles con ECC

Integrados en el conjunto de chips AMD 780G /

Integrados en el conjunto de chips AMD 785G

760G

Memoria máxima de vídeo compartida de 512

Memoria máxima de vídeo compartida de 512

MB

MB

Admite DX10/HDCP (780G ONLY)

Admite DX10.1/HDCP

Controlador IDE integrado Controlador IDE integrado

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133

Soporte los Modos PIO 0~4,

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3 Gb/s.

Compatible con la versión SATA 2.0.

Soporte los Modos PIO 0~4,

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3 Gb/s.

Compatible con la versión SATA 2.0.

50

TA785G3/TA780G3/TA760G3

Red Local

Soporte de sonido HD

TA780G3/TA760G3

Realtek RTL 8111DL

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

ALC662

Salida de sonido de 5.1 canales

Soporte de sonido Alta Definición

TA785G3

Realtek RTL 8111DL

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

ALC662

Salida de sonido de 5.1 canales

Soporte de sonido Alta Definición

Ranuras

Conectores en placa

Panel trasero de

E/S

Ranura PCI Express Gen2 x16

Ranura PCI

Conector disco flexible

Conector IDE

Conector SATA

Conector de panel frontal

Conector de sonido frontal

Conector de salida S/PDIF

X1

X1

Cabecera de ventilador de CPU X1

Cabecera de ventilador de sistema X2

Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

(24 patillas)

X1

X2

X1


(4 patillas)

Conector Puerto serie

Teclado PS/2

X1

X2

X1

X1

X4

X1

X1

Ratón PS/2

Puerto VGA

Puerto de red local

Puerto USB

Conector de sonido

Puerto DVI

X1

X1

X1

X1

X1

X4

X3

X1

Ranura PCI Express Gen2 x16

Ranura PCI

Conector disco flexible

Conector IDE

Conector SATA

Conector de panel frontal

Conector de sonido frontal

Conector de salida S/PDIF

X1

X1

Cabecera de ventilador de CPU X1

Cabecera de ventilador de sistema X2

Cabecera de borrado de CMOS

Conector USB


(24 patillas)

X1

X2

X1


(4 patillas)

Conector Puerto serie

Teclado PS/2

X1

X2

X1

X1

X4

X1

X1

Ratón PS/2

Puerto VGA

Puerto de red local

Puerto USB

Conector de sonido

Puerto DVI

X1

X1

X1

X1

X1

X4

X3

X1

Tamaño de la placa

209 mm. (A) X 244 Mm. (H)

Funciones especiales

Soporte de sistema operativo

Admite RAID 0 / 1 / 1+0


Biostar se reserva el derecho de añadir o retirar

209 mm. (A) X 244 Mm. (H)

Admite RAID 0 / 1 / 1+0


Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.

51


P

ORTUGUESE

CPU

TA780G3/TA760G3 TA785G3

Socket AM3

Processadores AMD Athlon II / Phenom II

Socket AM3

Processadores AMD Athlon II / Phenom II

A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma computação de 32 e 64 bits de 32 e 64 bits

FSB

Chipset

Suporta as tecnologias Hyper Transport 3.0 e

Cool’n’Quiet

(Watt máximo: 125W)

Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.2 GT/s

AMD 780G / 760G

AMD SB710

Suporta as tecnologias Hyper Transport 3.0 e

Cool’n’Quiet

(Watt máximo: 125W)

Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 4.4 GT/s

AMD 785G

AMD SB710

ITE 8718F

Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.

Especificaçã o Super I/O

Interface LPC (Low Pin Count).

Iniciativas para controlo do ambiente

Monitorização do hardware

Função "Smart Guardian" da ITE

Memória principal

Placa gráfica

IDE

SATA

ITE 8718F

Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.

Interface LPC (Low Pin Count).

Iniciativas para controlo do ambiente

Monitorização do hardware

Função "Smart Guardian" da ITE

Ranhuras DIMM DDR3 x 2

Capacidade máxima de memória: 8 GB

Cada módulo DIMM suporta uma memória

DDR3 de 512 MB & 1 GB/2 GB/4 GB

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 800 / 1066 / 1333

Suporta módulos DDR3 1600 (OC)

Os módulos DIMM registados e os DIMM ECC não são suportados

Integrada no chipset AMD 780G / 760G

Ranhuras DIMM DDR3 x 2

Capacidade máxima de memória: 8 GB

Cada módulo DIMM suporta uma memória

DDR3 de 512 MB & 1 GB/2 GB/4 GB

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 800 / 1066 / 1333

Suporta módulos DDR3 1600 (OC)

Os módulos DIMM registados e os DIMM ECC não são suportados

Integrada no chipset AMD 785G

Memória de vídeo máxima partilhada: 512 MB

Suporta as funções DX10/HDCP (780G ONLY)

Memória de vídeo máxima partilhada: 512 MB

Suporta as funções DX10.1/HDCP

Controlador IDE integrado Controlador IDE integrado

Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133

Suporta o modo PIO 0~4,

Controlador Serial ATA integrado

Suporta o modo PIO 0~4,

Controlador Serial ATA integrado

Velocidades de transmissão de dados até 3 Gb/s. Velocidades de transmissão de dados até 3 Gb/s.

Compatibilidade com a especificação SATA versão 2.0.

Compatibilidade com a especificação SATA versão 2.0.

52

LAN

TA780G3/TA760G3

Realtek RTL 8111DL

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

Suporte para áudio de alta definição

ALC662

Saída de áudio de 5.1 canais

Suporta a especificação High-Definition Audio

Ranhuras

Conectores na placa

Ranhura PCI Express Gen2 x16

Ranhura PCI x1 x2

Conector da unidade de disquetes x1

Conector IDE

Conector SATA

Conector do painel frontal

Conector de áudio frontal

Conector de saída S/PDIF

Conector da ventoinha da CPU x1 x1

Conector da ventoinha do sistema x2

Conector para limpeza do CMOS x1

Conector USB

Conector de alimentação

(24 pinos)

Conector de alimentação x1 x4 x1 x1 x2 x1 x1

Entradas/S aídas no painel traseiro

(4 pinos)

Conector da Porta série

Teclado PS/2

Rato PS/2

Porta VGA

Porta LAN

Porta USB

Tomada de áudio

Porta DVI

Tamanho da placa

209 mm (L) X 244 mm (A)

Característi cas especiais

Suporta as funções RAID 0 / 1 / 1+0

Sistemas operativos suportados


A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio. x1 x1 x1 x1 x1 x4 x3 x1

TA785G3/TA780G3/TA760G3

TA785G3

Realtek RTL 8111DL

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

ALC662

Saída de áudio de 5.1 canais

Suporta a especificação High-Definition Audio

Ranhura PCI Express Gen2 x16

Ranhura PCI x1 x2

Conector da unidade de disquetes x1

Conector IDE

Conector SATA

Conector do painel frontal

Conector de áudio frontal

Conector de saída S/PDIF

Conector da ventoinha da CPU x1 x1

Conector da ventoinha do sistema x2

Conector para limpeza do CMOS x1

Conector USB

Conector de alimentação

(24 pinos)

Conector de alimentação x1 x4 x1 x1 x2 x1 x1

(4 pinos)

Conector da Porta série

Teclado PS/2

Rato PS/2

Porta VGA

Porta LAN

Porta USB

Tomada de áudio

Porta DVI x1 x1 x1 x1 x1 x4 x3 x1

209 mm (L) X 244 mm (A)

Suporta as funções RAID 0 / 1 / 1+0


A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio.

53


P

OLISH

Procesor

FSB

Chipset

TA780G3/TA760G3

Socket AM3

AMD Athlon II / Phenom II Procesory

Architektura AMD 64 umożliwia przetwarzanie

32 i 64 bitowe

Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet

TA785G3

Socket AM3

AMD Athlon II / Phenom II Procesory

Architektura AMD 64 umożliwia przetwarzanie

32 i 64 bitowe

Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet

(Maksymalny Watt: 125W) (Maksymalny Watt: 125W)

Obsługa HyperTransport 3.0 o szerokości pasma Obsługa HyperTransport 3.0 o szerokości pasma do 5.2 GT/s do 4.4 GT/s

AMD 780G / 760G

AMD SB710

AMD 785G

AMD SB710

Pamięć główna

Super I/O

Grafika

IDE

SATA

Gniazda DDR3 DIMM x 2

Maks. wielkość pamięci 8GB

Gniazda DDR3 DIMM x 2

Maks. wielkość pamięci 8GB

Każde gniazdo DIMM obsługuje moduły 512MB Każde gniazdo DIMM obsługuje moduły 512MB oraz 1GB/2GB/4GB DDR3 oraz 1GB/2GB/4GB DDR3

Moduł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 800 / 1066 / 1333

Obsługa DDR3 1600 (OC)

Brak obsługi Registered DIMM oraz ECC DIMM

Moduł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 800 / 1066 / 1333

Obsługa DDR3 1600 (OC)

Brak obsługi Registered DIMM oraz ECC DIMM

ITE 8718F ITE 8718F

Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Funkcja ITE "Smart Guardian"

Zintegrowana w chipsecie AMD 780G / 760G

Maks. wielkość współdzielonej pamięci video wynosi 512 MB

Obsługa DX10/HDCP (780G ONLY)

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Funkcja ITE "Smart Guardian"

Zintegrowana w chipsecie AMD 785G

Maks. wielkość współdzielonej pamięci video wynosi 512 MB

Obsługa DX10.1/HDCP

Zintegrowany kontroler IDE

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsługa PIO tryb 0~4,

Zintegrowany kontroler IDE

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsługa PIO tryb 0~4,

Zintegrowany kontroler Serial ATA

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Zintegrowany kontroler Serial ATA

Transfer danych do 3 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

54

TA785G3/TA780G3/TA760G3

LAN

Obsługa audio HD

TA780G3/TA760G3

Realtek RTL 8111DL

110 / 100 / 1000 Mb/s z automatyczną negocjacją szybkości

Działanie w trybie połowicznego / pełnego dupleksu

ALC662

5.1 kanałowe wyjście audio

Obsługa High-Definition Audio

TA785G3

Realtek RTL 8111DL

10 / 100 / 1000 Mb/s z automatyczną negocjacją szybkości

Działanie w trybie połowicznego / pełnego dupleksu

ALC662

5.1 kanałowe wyjście audio

Obsługa High-Definition Audio

Gniazda

Gniazdo PCI Express Gen2 x16

Gniazdo PCI

Złącze napędu dyskietek

Złącze IDE x1 x2 x1 x1

Gniazdo PCI Express Gen2 x16

Gniazdo PCI

Złącze napędu dyskietek

Złącze IDE x1 x2 x1 x1

Złącze SATA

Złącze panela przedniego x4 x1

Złącze SATA

Złącze panela przedniego x4 x1

Przednie złącze audio x1 Przednie złącze audio x1

Złącza wbudowane

Złącze wyjścia S/PDIF x1

Złącze główkowe wentylatora procesora x1

Złącze wyjścia S/PDIF x1

Złącze główkowe wentylatora procesora x1

Złącze główkowe wentylatora systemowego x2 Złącze główkowe wentylatora systemowego x2

Back Panel

I/O

Złącze główkowe kasowania CMOS x1

Złącze USB

Złącze zasilania (24 pinowe) x2 x1

Złącze zasilania (4 pinowe)

Złącze Port szeregowy x1 x1

Klawiatura PS/2

Mysz PS/2

Port VGA

Port LAN

Port USB

Gniazdo audio


Złącze główkowe kasowania CMOS x1

Złącze USB



Złącze Port szeregowy

Klawiatura PS/2

Mysz PS/2

Port VGA

Port LAN

Port USB

Gniazdo audio

Port DVI x2 x1 x1 x1 x1 x1 x1 x1 x4 x3 x1

Wymiary płyty

209 mm (S) X 244 mm (W) 209 mm (S) X 244 mm (W)

Funkcje specjalne

Obsluga systemu operacyjne go

Obsługa RAID 0 / 1 / 1+0


Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.

Obsługa RAID 0 / 1 / 1+0


Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.

55


R

USSIAN

Гнездо AM3

TA780G3/TA760G3 TA785G3

CPU

(центральный процессор)

Процессоры AMD Athlon II / Phenom II

Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит

Процессоры AMD Athlon II / Phenom II

Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит

Поддержка Hyper Transport 3.0 и Cool’n’Quiet Поддержка Hyper Transport 3.0 и Cool’n’Quiet

(Максимальный ватт: 125W)

Гнездо AM3

(Максимальный ватт: 125W)

FSB

Поддержка HyperTransport 3.0 с пропускной способностью до 5.2 GT/s

Поддержка HyperTransport 3.0 с пропускной способностью до 4.4 GT/s

Набор микросхем

Основная память

Super I/O

Графика

IDE

SATA

AMD 780G / 760G

AMD SB710

Слоты DDR3 DIMM x 2

AMD 785G

AMD SB710

Слоты DDR3 DIMM x 2

Максимальная ёмкость памяти 8 ГБ

Каждый модуль DIMM поддерживает 512МБ

Максимальная ёмкость памяти 8 ГБ

Каждый модуль DIMM поддерживает 512МБ

& 1ГБ/2ГБ/4ГБ DDR3

Модуль памяти с двухканальным режимом

DDR3

Поддержка DDR3 800 / 1066 / 1333

Поддержка DDR3 1600 (OC)

Не поддерживает зарегистрированные модули DIMM and ECC DIMM

ITE 8718F

& 1ГБ/2ГБ/4ГБ DDR3

Модуль памяти с двухканальным режимом

DDR3

Поддержка DDR3 800 / 1066 / 1333

Поддержка DDR3 1600 (OC)

Не поддерживает зарегистрированные модули DIMM and ECC DIMM

ITE 8718F

Обеспечивает наиболее используемые действующие функциональные возможности Super I/O.

Интерфейс с низким количеством выводов

Инициативы по охране окружающей среды,

Аппаратный монитор

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

Встроенная в набор микросхем AMD 780G /

760G

Максимальная совместно используемая видео память составляет 512 МБ

Поддержка DX10/HDCP (780G ONLY)

Обеспечивает наиболее используемые действующие функциональные возможности Super I/O.

Интерфейс с низким количеством выводов

Инициативы по охране окружающей среды,

Аппаратный монитор

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

Встроенная в набор микросхем AMD 785G

Максимальная совместно используемая видео память составляет 512 МБ

Поддержка DX10.1/HDCP

Встроенное устройство управления встроенными интерфейсами устройств

Режим "хозяина" шины Ultra DMA 33 / 66 /

100 / 133

Поддержка режима PIO 0~4,

Встроенное последовательное устройство управления ATA скорость передачи данных до 3 гигабит/с.

Соответствие спецификации SATA версия

2.0.

Встроенное устройство управления встроенными интерфейсами устройств

Режим "хозяина" шины Ultra DMA 33 / 66 /

100 / 133

Поддержка режима PIO 0~4,

Встроенное последовательное устройство управления ATA скорость передачи данных до 3 гигабит/с.

Соответствие спецификации SATA версия

2.0.

56

Локальная сеть

Звуковая поддержка жесткого диска

Слоты

TA785G3/TA780G3/TA760G3

TA780G3/TA760G3 TA785G3

Realtek RTL 8111DL

Автоматическое согласование 10 / 100 /

1000 Мб/с

Realtek RTL 8111DL

Автоматическое согласование 10 / 100 /

1000 Мб/с

Частичная / полная дуплексная способность Частичная / полная дуплексная способность

ALC662

Звуковая поддержка High-Definition

5.1канальный звуковой выход

Слот PCI Express Gen2 x16

Слот PCI x1 x2

ALC662

Звуковая поддержка High-Definition

5.1канальный звуковой выход

Слот PCI Express Gen2 x16

Слот PCI x1 x2

Разъём IDE

Разъём SATA x1 x4

Разъём IDE

Разъём SATA x1 x4

Разъём на лицевой панели x1 Разъём на лицевой панели x1

Входной звуковой разъём x1 Входной звуковой разъём x1

Разъём вывода для S/PDIF x1 Разъём вывода для S/PDIF x1

Контактирующее приспособление вентилятора центрального

Контактирующее приспособление вентилятора центрального

Встроенный разъём

Контактирующее приспособление Контактирующее приспособление

Открытое контактирующее приспособление CMOS x1

Открытое контактирующее приспособление CMOS x1

Разъем питания (24 вывод) x1 Разъем питания (24 вывод) x1

Разъем питания (4 вывод) x1 Разъем питания (4 вывод) x1

Разъём Последовательный порт x1

Клавиатура PS/2 x1

Разъём Последовательный порт x1

Клавиатура PS/2 x1

Задняя панель средств ввода-вывода

Мышь PS/2

Порт VGA

Порт LAN

Гнездо для подключения x1 x1 x1

Мышь PS/2

Порт VGA

Порт LAN

Гнездо для подключения x1 x1 x1

Поддержка

OS

Порт DVI

Размер панели

Специальные технические характеристи ки

Поддержка RAID 0 / 1 / 1+0 x1 Порт DVI

Поддержка RAID 0 / 1 / 1+0 x1


Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или без предварительного уведомления.


Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или без предварительного уведомления.

57


A

RABIC

TA785G3

ﺲﺒﻘﻣAM3

تﺎﺠﻟﺎﻌﻣAMD Athlon / Athlon II / Sempron /

Phenom / Phenom II

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺖﺏ 64 و 32 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyper Transport 3.0

و Cool’n’Quiet

(طاو ىﻮ ﺼﻗ: 125و)

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyperTransport 3.0

ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 4.4 GT/s

AMD 785G

AMD SB710

ITE 8718F

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎﻣاﺪﺨﺘﺳا ﺮﺜآﻷا

ﺔﻴﻨﻘﺗ ﻢﻋﺪ ﺗ Low Pin Count Interface

: ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو

ةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻣ

TA780G3/TA760G3

تﺎﺠﻟﺎﻌﻣAMD Athlon / Athlon II / Sempron /

Phenom / Phenom II

ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺖﺏ 64 و 32 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyper Transport 3.0

و Cool’n’Quiet

ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو

ﺔیﺰآﺮﻤﻟا

(طاو ىﻮ ﺼﻗ: 125و)

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyperTransport 3.0

ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 5.2 GT/s ﻲﺒﻥﺎﺠﻟا ﻲﻣﺎﻣﻷا ﻞﻗﺎﻨﻟا

AMD 780G / 760G

AMD SB710

ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻣ

ITE 8718F

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎﻣاﺪﺨﺘﺳا ﺮﺜآﻷا

ﺔﻴﻨﻘﺗ ﻢﻋﺪ ﺗ Low Pin Count Interface

: ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو

ةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻣ

Super I/O

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE

2 دﺪﻋ DDR3 DIMM ﺔﺤﺘﻓ

ﺖیﺎﺏ ﺎﺠﻴﺝ 8 ىﻮﺼﻗ ةﺮآاذ ﺔ ﻌﺳ

2 دﺪﻋ DDR3 DIMM ﺔﺤﺘﻓ

ﺖیﺎﺏ ﺎﺠﻴﺝ 8 ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ 256/512 ﺎﺠﻴﻣ ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ 256/512 ﺎﺠﻴﻣ

ﺖیﺎﺏ ﺎﺠﻴﺝ 4 و / 2 و / 1 و ﺖیﺎﺏ ﺖیﺎﺏ ﺎﺠﻴﺝ 4 و / 2 و / 1 و ﺖیﺎﺏ

ةﺮآاذ ةﺪﺡوDDR3 ةﺎﻨ ﻘﻟا ﺔﺝودﺰﻣ ةﺮآاذ ةﺪﺡوDDR3 ةﺎﻨ ﻘﻟا ﺔﺝودﺰﻣ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 ﺖیﺎﺏ ﺎﺠﻴﻣ 1333 / 1066 / 800 تﺎﻌﺳ عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 ﺖیﺎﺏ ﺎﺠﻴﻣ 1333 / 1066 / 800 تﺎﻌﺳ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 ﺖیﺎﺏ ﺎﺠﻴﻣ ( OC ) 1600 تﺎﻌﺳ عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 ﺖیﺎﺏ ﺎﺠﻴﻣ ( OC ) 1600 تﺎﻌﺳ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC

ﺔﻴﺴﻴﺋﺮﻟا ةﺮآاﺬﻟا

ﻮیﺪﻴﻔﻟا

ﻖﺋﺎﻗر ﻲﻓ ﺔﺠﻣﺪﻣ AMD 785G

ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ ﺖیﺎﺏ ﺎﺠﻴﻣ

ﻖﺋﺎﻗر ﻲﻓ ﺔﺠﻣﺪﻣ AMD 780G / 760G

ﻮیﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ ﺖیﺎﺏ ﺎﺠﻴﻣ تﺎﻣﻮﺳﺮﻟا ﺔﻗﺎﻄﺏ

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗDX10.1/HDCP ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHDCP (780G only)/DX10

ﻢﻜﺤﺘﻣIDEﻞﻣﺎﻜﺘﻣ

ﺔﻴﻨﻘﺘﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133ﻲﺴﻴﺋر ﻊﺿو

ﻢﻜﺤﺘﻣIDEﻞﻣﺎﻜﺘﻣ

ﺔﻴﻨﻘﺘﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133 و IDE ﺬﻔﻨﻣ

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻞﻣﺎﻜﺘﻣ

ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ 3 .

ﺔﻴﻥﺎﺙ / ﺖﺏﺎﺠﻴﺝ

ﺔﻘﺏﺎﻄﻣ راﺪﺹﻹا 2.0.

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻞﻣﺎﻜﺘﻣ

ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ 3 .

ﺔﻴﻥﺎﺙ / ﺖﺏﺎﺠﻴﺝ SATA

ﺔﻘﺏﺎﻄﻣ راﺪﺹﻹا 2.0.

58

TA785G3

Realtek RTL 8111DL

ﺔﻴﻥﺎﺙ / ﺖﺏ ﺎﺠﻴﺝ 1 و ﺔﻴﻥﺎﺙ / ﺖیﺎﺏ ﺎﺠﻴﻣ 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ

ﻲﻔﺼﻨﻟا / ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ

ALC662

5.1

تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

4 دﺪﻋ

3 ﺪﻋ

1 دﺪﻋ

1 دﺪﻋ PCI Express Gen2 x16 ﺔﺤﺘﻓ

2 دﺪﻋ PCI ﺔﺤﺘﻓ

1

1

4

1

1

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

ﺔﻥﺮﻣ صاﺮﻗأ كﺮﺤﻣ ﺬﻔﻨﻣ

IDE ﺬﻔﻨﻣ

SATA ﺬﻔﻨﻣ

ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮﻠﻟا ﺬﻔﻨﻣ

ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ

1 دﺪﻋ S/PDIF جﺮﺥ ﺬﻔﻨﻣ

1 دﺪﻋ ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو

2 دﺪﻋ

1 دﺪﻋ

مﺎﻈﻨﻟا ﺔﺡوﺮﻣ ﺔﻠﺹو

CMOS ﺢﺴﻣ ﺔﻠﺹو

USB ﺬﻔﻨﻣ 2 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

( سﻮﺏد 24

(

) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ

سﻮﺏد 4 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ

PS/2 ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟ

PS/2 سوﺎﻣ

VGA ﺬﻔﻨﻣ

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ

USB ﺬﻓﺎﻨﻣ

تﻮﺹ ﺲﺒﻘﻣ

DVI ﺬﻓ ﺎﻨﻣ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

4 دﺪﻋ

3 ﺪﻋ

1 دﺪﻋ

TA785G3/TA780G3/TA760G3

TA780G3/TA760G3

Realtek RTL 8111DL

ﺔﻴﻥﺎﺙ / ﺖﺏ ﺎﺠﻴﺝ 1 و ﺔﻴﻥﺎﺙ / ﺖیﺎﺏ ﺎﺠﻴﻣ 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ

ﻲﻔﺼﻨﻟا / ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ

ﺔﻴﻠﺥاد ﺔﻜﺒﺵ

ALC662

5.1

تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ

ﻦﻣ ﻒیﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗ

1 دﺪﻋ PCI Express Gen2 x16 ﺔﺤﺘﻓ

2 دﺪﻋ PCI ﺔﺤﺘﻓ

1

1

دﺪﻋ

دﺪﻋ

ﺔﻥﺮﻣ صاﺮﻗأ كﺮﺤﻣ ﺬﻔﻨﻣ

IDE ﺬﻔﻨﻣ

SATA ﺬﻔﻨﻣ 4 دﺪﻋ

1

1

دﺪﻋ

دﺪﻋ

ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮﻠﻟا ﺬﻔﻨﻣ

ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ

1 دﺪﻋ S/PDIF جﺮﺥ ﺬﻔﻨﻣ

1 دﺪﻋ ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو

2 دﺪﻋ

1 دﺪﻋ

مﺎﻈﻨﻟا ﺔﺡوﺮﻣ ﺔﻠﺹو

CMOS ﺢﺴﻣ ﺔﻠﺹو

USB ﺬﻔﻨﻣ 2 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

( سﻮﺏد 24

(

) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ

سﻮﺏد 4 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ

ﻲﻟﺎﻋ تﻮﺼﻟا ﻢﻋد

ﻒیﺮﻌﺘﻟا

تﺎﺤﺘﻔﻟا

ﺢﻄﺳ ﻰﻠﻋ ﺬﻓﺎﻨﻤﻟا

ﺔﺡﻮﻠﻟا

PS/2 ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟ

PS/2 سوﺎﻣ

VGA ﺬﻔﻨﻣ

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ

USB ﺬﻓﺎﻨﻣ

تﻮﺹ ﺲﺒﻘﻣ

DVI ﺬﻓﺎﻨﻣ

جﺮﺥ / ﻞﺥد ﺬﻓﺎﻨﻣ

ﺔﻴﻔﻠﺨﻟا ﺔﺡﻮﻠﻟا

( عﺎﻔﺗرا ) ﻢﻣ 244 X ( ضﺮﻋ ) ﻢﻣ 209

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗRAID 0 / 1 / 1+0


ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

.

رﺎﻄﺥإ نوﺪﺏ

ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗRAID 0 / 1 / 1+0


ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ

.

رﺎﻄﺥإ نو ﺪﺏ

ﺔﺡﻮﻠﻟا ﻢﺠﺡ

ﺔﺹﺎﺥ ﺎیاﺰﻣ

ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻥأ ﻢﻋد

59


J

APANESE

TA780G3/TA760G3

CPU

Socket AM3

AMD Athlon II / Phenom II プロセッサ

Socket AM3

AMD Athlon II / Phenom II プロセッサ

AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計

算が可能です算が可能です

ハイパートランスポート

3.0とクールアンドクワイア

ットをサポートします

ハイパートランスポート

3.0とクールアンドクワイア

ットをサポートします

(最高のワット: 125W)

5.2 GT/sのバンド幅までハイパートランスポート3.0

FSB

をサポートします

チップセット

AMD 780G / 760G

AMD SB710

(最高のワット: 125W)

4.4 GT/sのバンド幅までハイパートランスポート3.0

をサポートします

AMD 785G

DDR3 DIMMスロット x 2

最大メモリ容量

8GB

AMD SB710

DDR3 DIMMスロット x 2

各 DIMMは 512MB & 1GB/2GB/4GB DDR3をサポ各 DIMMは 512MB & 1GB/2GB/4GB DDR3をサポ

メインメモリ

ート

デュアルチャンネルモードDDR3メモリモジュール

DDR3 800 / 1066 / 1333 をサポート

最大メモリ容量

8GB

ート

デュアルチャンネルモードDDR3メモリモジュール

DDR3 800 / 1066 / 1333 をサポート

DDR3 1600 (OC) をサポート

登録済み DIMMとECC DIMMはサポートされません

DDR3 1600 (OC) をサポート

登録済み DIMMとECC DIMMはサポートされません

ITE 8718F

もっとも一般に使用されるレガシー Super I/O機能を

採用しています。

Super I/O

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ITEの「スマートガーディアン」機能

グラフィック

AMD 780G / 760Gチップセットに統合

最大の共有ビデオメモリは

512MBです

ス

DX10/HDCP (780G ONLY) のサポート

IDE

SATA

統合

IDEコントローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

PIO Mode 0~4のサポート、

統合シリアル

ATAコントローラ

最高 3Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

ITE 8718F

TA785G3

もっとも一般に使用されるレガシー Super I/O機能を

採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ITEの「スマートガーディアン」機能

AMD 785Gチップセットに統合

最大の共有ビデオメモリは

512MBです

DX10.1/HDCP のサポート

統合

IDEコントローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

PIO Mode 0~4のサポート、

統合シリアル

ATAコントローラ

最高 3Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

60

LAN

TA780G3/TA760G3

Realtek RTL 8111DL

10 / 100 / 1000 Mb/秒のオートネゴシエーション

半

/全二重機能

HDオーディ

ALC662

オのサポート

5.1チャンネルオーディオアウト

ハイデフィニションオーディオのサポート

PCI Express Gen2 x16スロット x1

スロット

TA785G3/TA780G3/TA760G3

TA785G3

Realtek RTL 8111DL

10 / 100 / 1000 Mb/秒のオートネゴシエーション

半

/全二重機能

ALC662

5.1チャンネルオーディオアウト

ハイデフィニションオーディオのサポート

PCI Express Gen2 x16スロット x1

フロッピーコネクタ x1 x1

オンボードコ

フロントパネルコネクタ x1 x1

フロントオーディオコネクタ x1 フロントオーディオコネクタ x1

S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1

ネクタ

システムファンヘッダ x2 x2

背面パネル

I/O

電源コネクタ (24ピン)

電源コネクタ

(4ピン) x1 x1

電源コネクタ (24ピン)

電源コネクタ

(4ピン) x1 x1

シリアルポートコネクタ x1 x1

PS/2キーボード x1 PS/2キーボード x1

PS/2マウス

VGAポート x1 x1

PS/2マウス

VGAポート x1 x1

オーディオジャック

x3 x3

ボードサイズ

209 mm (幅) X 244 mm (高さ)

特殊機能 RAID 0 / 1 / 1+0 のサポート

OSサポート


Biostarは事前のサポートなしにOSサポートを追加ま

たは削除する権利を留保します。

209 mm (幅) X 244 mm (高さ)

RAID 0 / 1 / 1+0 のサポート


Biostarは事前のサポートなしにOSサポートを追加ま

たは削除する権利を留保します。

2009/09/23

61

Biostar T-Series TA785G3, TA780G3, TA760G3 Motherboard Setup Manual

Assistant Bot

FCC Information and Copyright

EFORE

OU

TART

ACKAGE

HECKLIST

OTHERBOARD

EATURES

EAR

ANEL

ONNECTORS

OTHERBOARD

AYOUT

NSTALLING

ENTRAL

ROCESSING

NIT

EADERS

CPU_FAN1: CPU Fan Header

SYS_FAN1: NorthBridge Fan Header

SYS_FAN2: System Fan Header

NSTALLING

YSTEM

EMORY

A. DDR3 Modules

B. Memory Capacity

C. Dual Channel Memory installation

ONNECTORS AND

LOTS

FDD1: Floppy Disk Connector

IDE1: IDE/ATAPI Connector

SATA1~SATA4: Serial ATA Connectors

ATXPWR1: ATX Power Source Connector

ATXPWR2: ATX Power Source Connector

PEX16_1: PCI-Express Gen2 x16 Slot

PCI1/PCI2: Peripheral Component Interconnect Slots

OW TO

ETUP

UMPERS

ETAIL

ETTINGS

PANEL1: Front Panel Header

JCMOS1: Clear CMOS Header

Clear CMOS Procedures:

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

JUSBV1/JUSBV2: Power Source Headers for USB Ports

F_AUDIO1: Front Panel Audio Header

JSPDIFOUT1: Digital Audio-out Connector

J_COM1: Serial Port Connector

On-Board LED Indicators

On-Board Buttons

YBRID

ROSS

IRE

EQUIREMENTS

YBRID

ROSS

IRE

NSTALLATION

PERATING

YSTEM

AID

RRAYS

OW

ORKS

RAID 0:

RAID 1:

RAID 1+0:

ERIES

T-Series BIOS Features

!! WARNING !!

A. Overclocking Navigator Engine (O.N.E.)

Manual Overclock System (M.O.S.)

NOTE

Automatic Overclock System (A.O.S.)

B. Memory Integration Test (M.I.T.)

C. BIO-Flasher

D. Self Recovery System (S.R.S.)