Biostar TA880GU3+ Owner's Manual

Biostar TA880GU3+ Owner's Manual
TA880GU3+ Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5
Before You Start ................................................................................ 1
Package Checklist ............................................................................. 1
Motherboard Features...................................................................... 2
Rear Panel Connectors ..................................................................... 3
Motherboard Layout......................................................................... 4
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU)....................................... 5
FAN Headers...................................................................................... 7
Installing System Memory ................................................................ 8
Connectors and Slots ....................................................................... 10
3.1
3.2
How to Setup Jumpers .................................................................... 13
Detail Settings.................................................................................. 13
4.1
4.2
Hybrid CrossFireX Requirements.................................................. 19
Hybrid CrossFireX Installation....................................................... 19
5.1
5.2
5.3
Operating System............................................................................ 20
Raid Arrays ...................................................................................... 20
How RAID Works............................................................................. 20
6.1
6.2
T-Series BIOS..................................................................................... 24
T-Series Software ............................................................................. 32
7.1
7.2
7.3
7.4
Driver Installation Note.................................................................. 42
Extra Information............................................................................ 43
AMI BIOS Beep Code....................................................................... 44
Troubleshooting............................................................................... 45
Chapter 2: Hardware Installation .......................... 5
Chapter 3: Headers & Jumpers Setup .................. 13
Chapter 4: Hybrid CrossFireX Function ................ 19
Chapter 5: RAID Functions .................................. 20
Chapter 6: T-Series BIOS & Software................... 24
Chapter 7: Useful Help ........................................ 42
Appendix: SPEC In Other Languages ................... 46
German.................................................................................................................. 46
French .................................................................................................................... 48
Italian..................................................................................................................... 50
Spanish ................................................................................................................... 52
Portuguese ............................................................................................................ 54
Polish...................................................................................................................... 56
Russian ................................................................................................................... 58
Arabic..................................................................................................................... 60
Japanese ................................................................................................................ 62
TA880GU3+
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
„
„
„
„
„
„
1.2
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
PACKAGE CHECKLIST
Serial ATA Cable X 3
Serial ATA Power Cable X 1
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
SPEC
CPU
FSB
Chipset
Super I/O
Socket AM3
AMD 64 Architecture enables 32 and 64 bit
AMD Sempron / Phenom II / Athlon II
computing
processors
Supports Hyper Transport 3.0
Support HyperTransport 3.0
Supports up to 5.2 GT/s Bandwidth
AMD 880G
AMD SB850
ITE 8728
Environment Control initiatives,
Provides the most commonly used legacy
H/W Monitor
Super I/O functionality.
Fan Speed Controller
Low Pin Count Interface
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 4
Main
Max Memory Capacity 16GB
Memory
Each DIMM supports 512MB/
Dual Channel Mode DDR3 memory module
Supports DDR3 800 / 1066 / 1333
Supports DDR3 1600 (OC)
1GB/2GB/4GB DDR3
Graphics
Max Shared Video Memory is 512MB
AMD 880G (Radeon HD4250)
DVI/HDMI/UVD2/HDCP support
Data transfer rates up to 6 Gb/s.
SATA III
Integrated Serial ATA Controller
SATA Version 3.0 specification compliant.
RAID 0,1,5,10 support
LAN
Realtek RTL8111E
Sound
ALC892
Slots
Half / Full duplex capability
5.1channels audio out
Supports HD Audio
x2
Supports PCI expansion cards
PCI Express Gen2 x16 Slot
x1
Supports PCI-E Gen2 x16 expansion card
SATA Connector
x6
Each connector supports 1 SATA device
Connectors Front Panel Connector
x1
Supports front panel facilities
Front Audio Connector
x1
Supports front panel audio function
On Board
2
PCI Slot
10 / 100 Mb/s / 1Gb/s auto negotiation
S/PDIF out Connector
x1
Supports digital audio out function
CPU Fan Header
x1
CPU Fan power supply (with Smart Fan function)
System Fan Header
x2
System Fan Power supply
CMOS clear Header
x1
Restore CMOS data to factory default
TA880GU3+
SPEC
Back Panel
I/O
USB Connector
x3
Each connector supports 2 front panel USB ports
Printer Port Connector
x1
Each connector supports 1 Printer port
Serial Port Connector
x1
Connects to RS-232 Port
Consumer IR Connector
x1
Supports infrared function
Power Connector (24pin)
x1
Connects to Power supply
Power Connector (4pin)
x1
Connects to Power supply
PS/2 Keyboard / Mouse
x1
Connects to PS/2 Keyboard / Mouse
HDMI Port
x1
Connects to HDMI cable
VGA Port
x1
Connect to D-SUB monitor
DVI-D Port
x1
Connect to DVI monitor
LAN Port
x1
Connect to RJ-45 ethernet cable
USB 2.0 Port
x2
Connect to USB 2.0 devices
USB 3.0 Port
x2
Connect to USB3.0 devices (by Asmedia ASM1042)
and USB2.0/USB1.X devices (by SB850)
Audio Jack
Board Size
x3
233 mm (W) x 244 mm (L)
uATX
Biostar reserves the right to add or remove support
OS Support Windows XP / Vista / 7
1.4
Provide Audio-In/Out and microphone connection
for any OS With or without notice.
REAR PANEL CONNECTORS
P S /2
K ey boa rd / Mo use
LA N
Lin e I n/
S urrou nd
Lin e O ut
Mi c In 1/
B as s/ Ce nter
US B2 .0X 2
HDM I
DV I-D
V GA
US B 3.0X 2
NOTE:
The HDMI and DVI-D ports both can provide digital video signals out-put function, but
these two interfaces cannot work at the same time. The chipset uses the same channel
to control HDMI and DVI-D, so these ports cannot transmit video signal to different display
panels simultaneously.
NOTE:
USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is
controlled by Asmedia ASM1042, but, USB2.0/USB1.X is controlled by SB850.
3
Motherboard Manual
1.5
MOTHERBOARD LAYOUT
PH1_D1
NB_P1_D1
PH3_D3
PH2_D2
USB_KBMS1
CPU _FAN 1
JUSBV1
HD MI1
DDR3_B2
DDR3_B1
DDR3_A1
So cket A M 3
D VI1
DDR3_A2
ATXPWR 2
VGA1
ATXPWR1
RJ45U SB1
AMD
880G
AUD IO1
LAN
SW_PWR1
SYS_FAN1
JCMOS1
SW_RST1
PEX16_1
Super
I/O
PCI1
BAT1
PCI2
Codec
JSPDIFOUT1
F_AU DIO1
CIR 1
J_PRINT1
F_USB2
J_C OM1
LED_D2
LED_D1
SATA3
SATA6
SATA2
SATA5
SATA1
SATA4
SYS_FAN 2
JUSBV2 F_U SB1 F_USB3
Note: ■ represents the 1st pin.
4
BIOS
AMD
SB850
PANEL1
TA880GU3+
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
5
Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.
6
TA880GU3+
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
1
4
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)
SYS_FAN1: NorthBridge Fan Header
SYS_FAN2: System Fan Header
Pin
1
2
3
SYS_FAN1
1
Assignment
Ground
+12V
FAN RPM
rate sense
3
SYS_FAN2
Note:
CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.
7
Motherboard Manual
2.3
INSTALLING SYSTEM MEMORY
8
DDR 3_B2
DDR 3_B1
DDR 3_A2
DDR 3_A1
A. DDR3 Modules
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
TA880GU3+
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB
DDR3_A2
512MB/1GB/2GB/4GB
DDR3_B1
512MB/1GB/2GB/4GB
DDR3_B2
512MB/1GB/2GB/4GB
Total Memory
Size
Max is 16GB.
C. Dual Channel Memory installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
Enabled
O
X
O
X
Enabled
X
O
X
O
Enabled
O
O
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
9
Motherboard Manual
2.4
CONNECTORS AND SLOTS
SATA1~SATA6: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 6 channels SATA interface,
it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s.
S ATA3 SATA6
S ATA2 SATA5
S ATA1 SATA4
7
4
Pin
1
2
3
4
5
6
7
Assignment
Ground
TX+
TXGround
RXRX+
Ground
1
ATXPWR2: ATX Power Source Connector
Connecting this connector will provide +12V to CPU power circuit.
1
4
2
3
Pin
1
2
3
4
10
Assignment
+12V
+12V
Ground
Ground
TA880GU3+
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
12
24
1
13
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
Note:
Before power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.
11
Motherboard Manual
PEX16_1: PCI-Express Gen2 x16 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.1 architecture.
PEX16_1
PCI1/PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
12
TA880GU3+
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
++ -
9
1
16
8
+ -
SPK
RST
HLED
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
13
Motherboard Manual
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation
(default).
1
1
3
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
Pin
1
2
3
4
5
6
2 6
1 5
14
Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power
TA880GU3+
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
3
Assignment
+5V
SPDIF_OUT
Ground
1
15
Motherboard Manual
J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.
2
26
1
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Assignment
25
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Pin
14
15
16
17
18
19
20
21
22
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
Ground
Data 4
Ground
Data 5
23
24
25
26
PE
Ground
SCLT
Key
J_COM1: Serial port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
16
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
TA880GU3+
F_USB1~F_USB3: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
F_ USB1 F_USB3
F_US B2
10
9
2
1
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at USB_KBMS1/RJ45USB1.
JUSBV2: +5V for USB ports at F_USB1/F_USB2/F_USB3.
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USB_KBMS1/RJ45USB1.
JUSBV2: +5V STB for USB ports at F_USB1/F_USB2/F_USB3.
JUSBV1
3
1
3
1
Pin 1-2 close
3
JUSBV2
3
1
Pin 2-3 close
1
17
Motherboard Manual
On-Board LED Indicators
NB_PH_D1
PH1_D1
PH2_D2
PH3_D3
There are 6 LED indicators showing system status.
LED_D2
LED_D1
LED_D1 & LED_D2: Debug Indicators
NB_PH_D1/PH1_D1 ~ PH3_D3 Power Status Indicators
Please refer to the tables below for specific messages:
LED_D1
ON
ON
OFF
OFF
LED_D2
ON
OFF
ON
OFF
NB_PH_D1
PH1_D1 ~ PH3_D3
ON
OFF
Message
Normal
Memory Error
VGA Error
Abnormal: CPU / Chipset error.
Phase Indicator
Phase Active
Phase Disable
On-Board Buttons
There are 2 on-board buttons.
SW_PWR1
SW_RST1
SW_RST1: Reset button.
SW_PWR1: Power Switch button.
18
TA880GU3+
CHAPTER 4: HYBRID CROSSFIREX FUNCTION
4.1
HYBRID CROSSFIREX REQUIREMENTS
1. A graphics card supporting Hybrid CrossFireX technology.
2. The graphics card driver should support Hybrid CrossFireX technology.
3. Operating System: Windows Vista and Windows 7.
4. Memory Capacity: Minimum 1GB.
5. On-board graphics card RAM: 256MB
6. The power supply unit must provide at least the minimum power required by
the system, or the system will be unstable. A power supply above 450W is
recommended under Hybrid CrossFireX mode.
NOTE
Please visit AMD ATI website for the latest graphics card support list
4.2
HYBRID CROSSFIREX INSTALLATION
Step 1: Insert the Hybrid CrossFireX-Ready graphics card into PEX16_1.
Ra de on GPU
PEX16 _1
Notice: Please make sure the graphics card is seated into slot
completely.
Step 2: Configure the BIOS setting, and set Surround View from “Auto” to
“Enabled”.
Step 3: Choose “Hybrid CrossFireX” function through configuration program of
the graphics card. Installation completes.
19
Motherboard Manual
CHAPTER 5: RAID FUNCTIONS
5.1
OPERATING SYSTEM
Supports Windows Vista and Windows 7.
5.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
5.3
HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Block 1
Block 3
Block 5
20
Block 2
Block 4
Block 6
TA880GU3+
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
Block 1
Block 2
Block 3
21
Motherboard Manual
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­
­
­
­
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Block 3
Block 5
22
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
TA880GU3+
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.
Features and Benefits
­
­
­
­
­
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
23
Motherboard Manual
CHAPTER 6: T-SERIES BIOS & SOFTWARE
6.1
T-SERIES BIOS
T-Series BIOS Features
Overclocking Navigator Engine (O.N.E.)
Memory Integration Test (M.I.T., under Overclock Navigator Engine)
BIO-Flasher: Update BIOS file from USB Flash Drive or FDD
Self Recovery System (S.R.S)
Smart Fan Function
CMOS Reloading Program
!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described below in
this manual is for your reference only and the actual BIOS
information and settings on board may be different from this
manual. For further information of setting up the BIOS, please
refer to the BIOS Manual in the Setup CD.
A. Overclocking Navigator Engine (O.N.E.)
ONE provides two powerful overclocking engines: MOS and AOS for both
Elite and Casual overclockers.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
Exit
T-Series Settings
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
CPU Configuration
[Auto]
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
24
TA880GU3+
Manual Overclock System (M.O.S.)
MOS is designed for experienced overclock users.
It allows users to customize personal overclock settings.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Exit
Options
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Normal]
=========== Automate OverClock System
===========
Options
Auto OverClock System
[V6-Tech
Engine]
Normal
============ Manual OverClock
System
============
OverClock
CPU/HT Reference Clock (MHz)Automate
[200]
Manual
CPU Configuration
[Auto]OverClock
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
Normal
Automate OverClock
Manual OverClock
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
↓
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Manual OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
CPU Configuration
[Auto]
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
Exit
Options
Normal
Automate OverClock
Manual OverClock
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
BIO-unlocKING
This item allows you to activate BIO-unlocKING function.
CPU/HT Reference Clock (MHz)
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
CPU Configuration
This item provides several fixed modes of CPU configuration.
CPU Tuning
Enter this function for more advanced CPU settings.
Clock Control
Enter this function for more clock settings.
25
Motherboard Manual
Voltage Configuration
Enter this function for more advanced voltage settings.
DRAM Timing Configuration
Enter this function for more advanced DRAM clock settings.
Memory Configuration
Enter this function for more advanced memory settings.
NOTE
Overclock is an optional process, but not a “must-do” process; it is
not recommended for inexperienced users. Therefore, we will not
be responsible for any hardware damage which may be caused by
overclocking. We also would not guarantee any overclocking
performance.
Automatic Overclock System (A.O.S.)
For beginners in overclock field, BET had developed an easy, fast, and
powerful feature to increase the system performance, named A.O.S.
Based on many tests and experiments, A.O.S. provides 3 ideal overclock
configurations that are able to raise the system performance in a single
step.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Normal]
=========== Automate OverClock System
===========
Options
Auto OverClock System
[V6-Tech Engine]
Normal
============ Manual OverClock
System OverClock
============
CPU/HT Reference Clock (MHz)Automate
[200]
Manual
CPU Configuration
[Auto]OverClock
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
Exit
Options
Normal
Automate OverClock
Manual OverClock
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
26
TA880GU3+
V6 Tech Engine
This engine will make a good over-clock performance.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Exit
Options
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
CPU Configuration
[Auto]
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
V6-Tech Engine
V8-Tech Engine
V12-Tech Engine
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
V8 Tech Engine
This engine will make a better over-clock performance.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Exit
Options
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V8-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
CPU Configuration
[Auto]
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
V6-Tech Engine
V8-Tech Engine
V12-Tech Engine
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
V12 Tech Engine
This engine will make a best over-clock performance.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V12-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
CPU Configuration
[Auto]
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
Exit
Options
V6-Tech Engine
V8-Tech Engine
V12-Tech Engine
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
27
Motherboard Manual
Notices:
Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
B. Memory Integration Test (M.I.T.)
This function is under “Overclocking Navigator Engine” item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is “Disabled”; the condition parameter should
be changed to “Enable” to proceed this test.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Exit
Options
Notice: Please Clear CMOS if system no display
after overclocking.
Enabled
Disabled
BIO-unlocKING
[Disabled]
OverClock Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
CPU Configuration
[Auto]
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Disabled]
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
↓
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
T-Series Settings
Notice: Please Clear CMOS if system no display
after overclocking.
BIO-unlocKING
[Disabled]
OverClock Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
CPU Configuration
[Auto]
> CPU Tuning
> Clock Control
> Voltage Configuration
> DRAM Timing Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
[Enabled]
Exit
Options
Enabled
Disabled
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from “Enable” to “Disable”
to complete the test.
28
TA880GU3+
C. BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press <F12> during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press <Enter> to enter the utility.
5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press <Enter>
then <Y> to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press <Y> to proceed. BIOS update completes.
z
z
This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.
29
Motherboard Manual
D. Self Recovery System (S.R.S.)
This function can’t be seen under BIOS setup; and is always on whenever the
system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default BIOS
setting, and all overclock settings will be re-configured.
E. Smart Fan Function
Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
Exit
Advanced Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
>
>
>
>
>
>
CPU Configuration
SuperIO Configuration
Smart Fan Configuration
Hardware Health Configuration
Power Configuration
USB Configuration
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
↓
Advanced
BIOS SETUP UTILITY
Smart Fan Configuration
CPU Smart Fan
Smart Fan Calibration
Control Mode
Fan Ctrl OFF(oC)
o
Fan Ctrl On( C)
Fan Ctrl Start value
Fan Ctrl Sensitive
[Disabled]
When you choice [Auto]
,[3Pin] or [4Pin],
please run the
calibration to define
the Fan parameters for
Smart Fan control
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
30
TA880GU3+
Smart Fan Calibration
Choose this item and then the BIOS will automatically test and detect the
CPU/System fan functions and show CPU/System fan speed.
Control Mode
This item provides several operation modes of the fan.
Fan Ctrl OFF(℃)
If the CPU/System temperature is lower than the set value, the CPU/
System fan will turn off. The range is from 0~127, with an interval of 1.
Fan Ctrl On(℃)
The CPU/System fan starts to work when CPU/System temperature
arrives to this set value. The range is from 0~127, with an interval of 1.
Fan Ctrl Start Value
When CPU/System temperature arrives to the set value, the CPU/System
fan will work under Smart Fan Function mode. The range is from 0~127,
with an interval of 1.
Fan Ctrl Sensitive
Increasing the value of slope PWM will raise the speed of CPU/System fan.
The range is from 1~127, with an interval of 1.
F. CMOS Reloading Program
It allows users to save different CMOS settings into BIOS-ROM.
Users are able to reload any saved CMOS setting for customizing system
configurations. Moreover, users are able to save an ideal overclock setting
during overclock operation.
There are 10 sets of record addresses in total, and users are able to name the
CMOS data according to personal preference.
Main
Advanced
PCIPnP
BIOS SETUP UTILITY
Boot
Chipset
T-Series
Exit
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
CMOS Backup Function
Security Settings
> Security
CMOS Backup Func
CMOS Data Reload
CMOS Data Save
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
31
Motherboard Manual
6.2
T-SERIES SOFTWARE
Installing T-Series Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.
Launching T-Series Software
After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.
TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status.This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The illustration below is for reference only)
32
TA880GU3+
The CPU tab provides information on the CPU and motherboard.
The Memory tab provides information on the memory module(s).
You can select memory module on a specific slot to see its information.
The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:
33
Motherboard Manual
Six Pre-set Modes: V3, V6, V9, V12, V15, AUTO for different overclocking
experience.
The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.
34
TA880GU3+
Pressing TOVERCLOCKER logo
will display information about
manufacturer and software version.
You can update currnet version by
clicking the button “Live Update.”
Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)
Typical Mode
Display manufacturer &
software version information
Performance
Mode
Medium Mode
Maxi-Energy Mode
Auto P hase Mode
Reset Time &
Consumption
Display CPU
information
35
Motherboard Manual
G.P.U Mode Setting
This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.
Note: Even if the modes saving more power consumption are chosen, the
system still can keep excellent performance.
36
„
Auto Phase Mode
System switches the mode automatically according to current system
loading condition.
„
Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.
„
Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.
„
Medium Mode
This is the standard system power saving mode.
„
Maxi-Energy Mode
This is the best system performance mode.
TA880GU3+
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represent s import ant
*information
that you
must provide. Without
this informat ion, you may
not be able to send out
the mail.
This block will show
the information which
would be collect ed in
the mail.
condition
* Describe
of your system.
your area or
* Select
the area close to you.
Provide the e-mail
address that you would
like to send t he copy to.
the name of
* Provide
the memory module
manufacturer.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
37
Motherboard Manual
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.
38
TA880GU3+
BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS
Show current BIOS information
AMI BIOS
Online Update function
Clear CMOS function
(Only for AMI BIOS)
(Only for AWARD BIOS)
Save current BIOS
to a .bin file
Update BIOS
with a BIOS file
<Backup BIOS>
Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.
39
Motherboard Manual
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
40
TA880GU3+
<Online Update> (for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure
that the computer is connected to the internet before using this function.
After clicking on the Online Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.
The programing procedure may take minutes, please do not make any operation
during the programing process.
After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.
All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this manual.
41
Motherboard Manual
CHAPTER 7: USEFUL HELP
7.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
42
TA880GU3+
7.2
EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
43
Motherboard Manual
7.3
AMI BIOS BEEP CODE
Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13
Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)
POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8
Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)
Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3
6, 7
8
44
Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
TA880GU3+
7.4
TROUBLESHOOTING
Probable
1.
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.
Solution
1.
2.
3.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
45
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
CPU
FSB
Chipsatz
Sockel AM3
Die AMD 64-Architektur unterstützt eine 32-Bit- und
AMD Sempron / Phenom II / Athlon II
64-Bit-Datenverarbeitung
Prozessoren
Unterstützt Hyper Transport 3.0
Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
AMD 880G
AMD SB850
ITE 8728
Super E/A
Umgebungskontrolle,
Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.
Lüfterdrehzahl-Controller
Low Pin Count-Schnittstelle
"Smart Guardian"-Funktion von ITE
DDR3 DIMM-Steckplätze x 4
Dual-Kanal DDR3 Speichermodul
Arbeitsspeich Max. 16GB Arbeitsspeicher
er
Unterstützt DDR3 800 / 1066 / 1333
Jeder DIMM unterstützt 512MB/
Unterstützt DDR3 1600 (OC)
1GB/2GB/4GB DDR3.
Grafik
Max. 512MB gemeinsam benutzter Videospeicher
AMD 880G (Radeon HD4250)
Unterstützt DVI/HDMI/UVD2/HDCP
Datentransferrate bis zu 6 Gb/s
SATA III
Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 3.0
Unterstützt RAID 0,1,5,10
LAN
10 / 100 / 1000 Mb/s Auto-Negotiation
Realtek RTL8111E
Halb-/ Vollduplex-Funktion
5.1-Kanal-Audioausgabe
Audio-Codec ALC892
Steckplätze
Unterstützt High-Definition Audio
PCI Steckplatz
x2
PCI Express Gen2 x16 Steckplatz
x1
Onboard-Ans SATA-Anschluss
x6
Jeder Anschluss unterstützt 1 SATA-Laufwerk
chluss
Fronttafelanschluss
x1
Unterstützt die Fronttafelfunktionen
Front-Audioanschluss
x1
Unterstützt die Fronttafel-Audioanschlussfunktion
S/PDIF Ausgangsanschluss
x1
Unterstützt die digitale Audioausgabefunktion
46
TA880GU3+
Spezifikationen
Rückseiten-E
/A
CPU-Lüfter-Sockel
x1
System-Lüfter-Sockel
x2
"CMOS löschen"-Sockel
x1
USB-Anschluss
x3
Druckeranschluss Anschluss
x1
Serieller Anschluss
x1
Verbraucher-IR Anschluss
x1
Stromanschluss (24-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur / Maus
x1
HDMI-Anschluss
x1
VGA-Anschluss
x1
DVI-D-Anschluss
x1
LAN-Anschluss
x1
USB 2.0-Anschluss
x2
USB 3.0-Anschluss
x2
CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Stromversorgungsanschluss
Jeder Anschluss unterstützt 2
Fronttafel-USB-Anschlüsse
Jeder Anschluss unterstützt 1 Druckeranschluss
USB3.0 Geräte (durch Asmedia ASM1042)
USB2.0/USB1.X Geräte (durch SB850)
Audioanschluss
Platinengröße 233 mm (B) X 244 mm (L)
OS-Unterstüt
zung
x3
uATX
Biostar behält sich das Recht vor, ohne Ankündigung
Windows XP / Vista / 7
die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.
47
Motherboard Manual
FRENCH
SPEC
Socket AM3
UC
Processeurs AMD Sempron / Phenom II /
Athlon II
Bus frontal
L'architecture AMD 64 permet le calcul 32 et 64 bits
Prend en charge Hyper Transport 3.0
Prend en charge Hyper Transport 3.0 jusqu'à
une bande passante de 5.2 GT/s
Chipset
AMD 880G
AMD SB850
Super E/S
ITE 8728
Initiatives de contrôle environnementales,
Fournit la fonctionnalité de Super E/S
Moniteur de matériel
patrimoniales la plus utilisée.
Contrôleur de vitesse de ventilateur
Interface à faible compte de broches
Fonction "Gardien intelligent" de l'ITE
Fentes DDR3 DIMM x 4
Mémoire
Capacité mémoire maximale de 16 Go
principale
Chaque DIMM prend en charge des DDR3 de
512Mo/1Go/2Go/4Go
Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 800 / 1066 / 1333
Prend en charge la DDR3 1600 (OC)
Mémoire vidéo partagée maximale de 512 Mo
Graphiques AMD 880G (Radeon HD4250)
Prise en charge DVI/HDMI/UVD2/HDCP
Taux de transfert jusqu'à 6 Go/s.
SATA III
Contrôleur Serial ATA intégré
Conforme à la spécification SATA Version 3.0
Prise en charge RAID 0,1,5,10
LAN
10 / 100 / 1000 Mb/s négociation automatique
Realtek RTL8111E
Half / Full duplex capability
Sortie audio à 5.1 voies
Codec audio ALC892
Fentes
Connecteur
embarqué
x2
Fente PCI Express Gen2 x16
x1
Connecteur SATA
x6
Connecteur du panneau avant
x1
Prend en charge les équipements du panneau avant
Connecteur Audio du panneau avant x1
Prend en charge la fonction audio du panneau avant
Connecteur de sortie S/PDIF
48
Prise en charge de l'audio haute définition
Fente PCI
x1
Chaque connecteur prend en charge 1 périphérique
SATA
Prend en charge la fonction de sortie audio
numérique
TA880GU3+
SPEC
Embase de ventilateur UC
x1
Embase de ventilateur système
x2
Embase d'effacement CMOS
x1
Connecteur USB
x3
Connecteur de Port d'imprimante
x1
Port série
x1
Alimentation électrique du ventilateur UC (avec
fonction de ventilateur intelligent)
Alimentation électrique du ventilateur système
Chaque connecteur prend en charge 2 ports USB de
panneau avant
Chaque connector prend en charge 1 Port
d'imprimante
Connecteur de IR du consommateur x1
Connecteur d'alimentation
x1
(24 broches)
Connecteur d'alimentation
x1
(4 broches)
Clavier / Souris PS/2
x1
Port HDMI
x1
Port VGA
x1
E/S du
Port DVI-D
x1
panneau
Port LAN
x1
arrière
Port USB 2.0
x2
Port USB 3.0
x2
USB3.0 dispositifs (par Asmedia ASM1042)
USB2.0/USB1.X dispositifs (par SB850)
Fiche audio
Dimensions
de la carte
233 mm (l) X 244 mm (H)
Support SE Windows XP / Vista / 7
x3
uATX
Biostar se réserve le droit d'ajouter ou de supprimer
le support de SE avec ou sans préavis.
49
Motherboard Manual
ITALIAN
SPECIFICA
L’architettura AMD 64 abilita la co mputazione 32
Socket AM3
CPU
Processori AMD Sempron / Phenom II / e 64 bit
Athlon II
FSB
Chipset
Supporto di Hyper Transport 3.0
Supporto di HyperTransport 3.0 fino a
5.2 GT/s di larghezza di banda
AMD 880G
AMD SB850
ITE 8728
Super I/O
Funzioni di controllo dell’ambiente:
Fornisce le funzionalità legacy Super Monitoraggio hardware
I/O usate più comunemente.
Controller velocità ventolina
Interfaccia LPC (Low Pin Count)
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 4
Memoria
Capacità massima della memoria 16GB
principale
Ciascun DIMM supporta DDR3
Supporto di DDR3 800 / 1066 / 1333
Supporto di DDR3 1600 (OC)
512MB/1GB/2GB/4GB
Grafica
Modulo di memoria DDR3 a canale doppio
La memoria video condivisa massima è di 512 MB
AMD 880G (Radeon HD4250)
Supporto DVI/HDMI/UVD2/HDCP
Velocità di trasferimento dei dati fino a 6 Gb/s.
SATA III
Controller Serial ATA integrato
Compatibile specifiche SATA Versione 3.0
Supporto RAID 0,1,5,10
LAN
Codec
Negoziazione automatica 10 / 100 / 1000 Mb/s
Realtek RTL8111E
Capacità Half / Full Duplex
Uscita audio 5.1 canali
ALC892
Supporto audio High-Definit ion (HD)
audio
Alloggi
Alloggio PCI
x2
Alloggio PCI Express Gen2 x16 x1
Connettori Connettore SATA
x6
Ciascun connettore supporta 1 unità SATA
su scheda Connettore pannello frontale
x1
Supporta i servizi del pannello frontale
Connettore audio frontale
x1
Supporta la funzione audio pannello frontale
Connettore output S/PDIF
x1
Supporta la funzione d’output audio digitale
Collettore ventolina CPU
x1
50
Alimentazione ventolina CPU (con funzione Smart
Fan)
TA880GU3+
SPECIFICA
Collettore ventolina sistema
x2
Collettore cancellaz ione CMOS
x1
Connettore USB
x3
Connettore Porta stampante
x1
Porta seriale
x1
Alimentazione ventolina di sistema
Ciascun connettore supporta 2 porte USB
pannello frontale
Ciascun connettore supporta 1 Porta stampante
Connettore IR del consumatore x1
Connettore alimentazione
x1
(24 pin)
Connettore alimentazione
x1
(4 pin)
Tastiera / Mouse PS/2
x1
Porta HDMI
x1
Porta VGA
x1
I/O
Porta DVI-D
x1
pannello
Porta LAN
x1
posteriore Porta USB 2.0
x2
Porta USB 3.0
x2
USB3.0 dispositivi (da Asmedia ASM1042)
USB2.0/USB1.X dispositivi (da SB850)
Connettore audio
Dimension 233 mm (larghezza) x 244 mm
i scheda
(altezza)
supportati
uATX
Biostar si riserva il diritto di aggiungere o
Sistemi
operativi
x3
Windows XP / Vista / 7
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
51
Motherboard Manual
SPANISH
Especificación
Conector AM3
CPU
La arquitectura AMD 64 permite el procesado de 32 y
Procesadores AMD Sempron / Phenom II / 64 bits
Athlon II
FSB
Soporta las tecnologías Hyper Transport 3.0
Admite HyperTransport 3.0 con un ancho
de banda de hasta 5.2 GT/s
Conjunto de AMD 880G
chips
AMD SB850
ITE 8728
Súper E/S
Iniciativas de control de entorno,
Le ofrece las funcionalidades heredadas de Monitor hardware
uso más común Súper E/S.
Controlador de velocidad de ventilador
Interfaz de cuenta Low Pin
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR3 x 4
Memoria
Capacidad máxima de memoria de 16GB
principal
Cada DIMM admite DDR de
Admite DDR3 de 800 / 1066 / 1333
Admite DDR3 de 1600 (OC)
512MB/1GB/2GB/4GB
Gráficos
Módulo de memoria DDR3 de canal Doble
Memoria máxima de vídeo compartida de 512 MB
AMD 880G (Radeon HD4250)
Admite DVI/HDMI/UVD2/HDCP
Tasas de transferencia de hasta 6 Gb/s.
SATA III
Controlador ATA Serie Integrado
Compatible con la versión SATA 3.0
Admite RAID 0,1,5,10
Red Local
Códecs de
sonido
Ranuras
Negociación de 10 / 100 / 1000 Mb/s
Realtek RTL8111E
Funciones Half / Full dúplex
Salida de sonido de 5.1 canales
ALC892
Ranura PCI
Ranura PCI express Gen2 x16
Soporte de sonido de Alta Definición
X2
X1
Conectores Conector SATA
X6
Cada conector soporta 1 dispositivos SATA
en placa
Conector de panel frontal
X1
Soporta instalaciones en el panel frontal
Conector de sonido frontal
X1
Soporta funciones de sonido en el panel frontal
Conector de salida S/PDIF
X1
Soporta función de salida de sonido digital
Cabecera de ventilador de CPU
X1
Fuente de alimentación de ventilador de CPU (con
función Smart Fan)
52
TA880GU3+
Especificación
Cabecera de ventilador de sistema X2
Fuente de alimentación de ventilador de sistema
Cabecera de borrado de CMOS
X1
Conector USB
X3
Cada conector soporta 2 puertos USB frontales
Conector Puerto de impresora
X1
Cada conector soporta 1 Puerto de impresora
Puerto serie
X1
Conector de IR del consumidor
X1
Conector de alimentación
X1
(24 patillas)
Conector de alimentación
X1
(4 patillas)
Teclado / Ratón PS/2
X1
Ratón HDMI
X1
Puerto VGA
X1
Puerto DVI-D
X1
trasero de
Puerto de red local
X1
E/S
Puerto USB 2.0
X2
Puerto USB 3.0
X2
Panel
USB3.0 dispositivos (por Asmedia ASM1042)
USB2.0/USB1.X dispositivos (por SB850)
Conector de sonido
Tamaño de
la placa
233 mm. (A) X 244 mm. (H)
Soporte de
sistema
operativo
Windows XP / Vista / 7
X3
uATX
Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.
53
Motherboard Manual
PORTUGUESE
ESPECIFICAÇÕES
A arquitectura AMD 64 permite uma computação de 32
Socket AM3
CPU
Processadores AMD Sempron / Phenom II e 64 bits
/ Athlon II
FSB
Chipset
Suporta as tecnologias Hyper Transport 3.0
Suporta a tecnologia HyperTransport 3.0
com uma largura de banda até 5.2 GT/s
AMD 880G
AMD SB850
ITE 8728
Especificaçã
o Super I/O
Iniciativas para controlo do ambiente
Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.
Ranhuras DIMM DDR3 x 4
Memória
Capacidade máxima de memória: 16 GB
principal
Cada módulo DIMM suporta uma
memória DDR3 de 512MB/ 1GB/2GB/4GB
gráfica
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
Interface LPC (Low Pin Count).
Placa
Monitorização do hardware
Módulo de memória DDR3 de canal duplo
Suporta módulos DDR3 800 / 1066 / 1333
Suporta módulos DDR3 1600 (OC)
Memória de vídeo máxima partilhada: 512 MB
AMD 880G (Radeon HD4250)
Suporta as funções DVI/HDMI/UVD2/HDCP
Velocidades de transmissão de dados até 6 Gb/s.
SATA III
Controlador Serial ATA integrado
Compatibilidade com a especificação SATA versão 3.0
Suporta as funções RAID 0,1,5,10
LAN
Codec de
som
Ranhuras
Auto negociação de 10 / 100 / 1000 Mb/s
Realtek RTL8111E
Capacidade semi/full-duplex
Saída de áudio de 5.1 canais
ALC892
Suporta a especificação High-Definition Audio
Ranhura PCI
x2
Ranhura PCI Express Gen2 x16
x1
Conectores Conector SATA
x6
Cada conector suporta 1 dispositivo SATA
na placa
Conector do painel frontal
x1
Para suporte de várias funções no painel frontal
Conector de áudio frontal
x1
Suporta a função de áudio no painel frontal
Conector de saída S/PDIF
x1
Suporta a saída de áudio digital
54
TA880GU3+
ESPECIFICAÇÕES
Alimentação da ventoinha da CPU (com a função Smart
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x2
Conector para limpeza do CMOS
x1
Conector USB
x3
Cada conector suporta 2 portas USB no painel frontal
Conector da para impressora
x1
Cada conector suporta 1 Porta para impressora
Porta série
x1
Conector de IR do consumidor
x1
Conector de alimentação
x1
Fan)
Alimentação da ventoinha do sistema
(24 pinos)
Conector de alimentação
x1
(4 pinos)
Teclado / Rato PS/2
x1
Porta HDMI
x1
Porta VGA
x1
Entradas/S Porta DVI-D
aídas no
painel
traseiro
x1
Porta LAN
x1
Porta USB 2.0
x2
Porta USB 3.0
x2
USB3.0 dispositivos (por Asmedia ASM1042)
USB2.0/USB1.X dispositivos (por SB850)
Tomada de áudio
Tamanho
da placa
233 mm (L) X 244 mm (A)
suportados
uATX
A Biostar reserva-se o direito de adicionar ou remover
Sistemas
operativos
x3
Windows XP / Vista / 7
suporte para qualquer sistema operativo com ou sem
aviso prévio.
55
Motherboard Manual
POLISH
SPEC
Procesor
Architektura AMD 64 umożliwia przetwarzanie
Socket AM3
AMD Sempron / Phenom II / Athlon II Procesory
FSB
32 i 64 bitowe
Obsługa Hyper Transport 3.0
Obsługa HyperTransport 3.0 o szerokości pasma
do 5.2 GT/s
Chipset
AMD 880G
AMD SB850
Gniazda DDR3 DIMM x 4
Moduł pamięci DDR3 z trybem podwójnego
Pamięć
Maks. wielkość pamięci 16GB
kanału
główna
Każde gniazdo DIMM obsługuje moduły
Obsługa DDR3 800 / 1066 / 1333
512MB/1GB/2GB/4GB DDR3
Obsługa DDR3 1600 (OC)
Maks. wielkość współdzielonej pamięci video
Grafika
AMD 880G (Radeon HD4250)
wynosi 512 MB
Obsługa DVI/HDMI/UVD2/HDCP
Funkcje kontroli warunków pracy,
ITE 8728
Super I/O
Zapewnia najbardziej powszechne funkcje Super Monitor H/W
I/O.
Kontroler prędkości wentylatora
Interfejs Low Pin Count
Funkcja ITE "Smart Guardian"
Transfer danych do 6 Gb/s.
SATA III
Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 3.0
Obsługa RAID 0,1,5,10
10 / 100 / 1000 Mb/s z automatyczną negocjacją
LAN
szybkości
Realtek RTL8111E
Działanie w trybie połowicznego/pełnego
dupleksu
Kodek
dźwiękowy
5.1 kanałowe wyjście audio
ALC892
Obsługa High-Definition Audio
Gniazdo PCI
x2
Gniazdo PCI Express Gen2 x16
x1
Złącze SATA
x6
Każde złącze obsługuje 1 urządzenie SATA
wbudowane Złącze panela przedniego
x1
Obsługa elementów panela przedniego
x1
Obsługa funkcji audio na panelu przednim
Gniazda
Złącza
Przednie złącze audio
56
TA880GU3+
SPEC
Złącze wyjścia S/PDIF
x1
Złącze główkowe wentylatora
procesora
Obsługa funkcji cyfrowego wyjścia audio
Zasilanie wentylatora procesora (z funkcją Smart
x1
Fan)
Złącze główkowe wentylatora systemowego x2 Zasilanie wentylatora systemowego
Złącze główkowe kasowania
Back Panel
I/O
CMOS
x1
Złącze USB
x3
Złącze Port drukarki
x1
Port szeregowy
x1
Złącze Konsument IR
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura / Mysz PS/2
x1
Port HDMI
x1
Port VGA
x1
Port DVI-D
x1
Port LAN
x1
Port USB 2.0
x2
Port USB 3.0
x2
Każde złącze obsługuje 2 porty USB na panelu
przednim
Każde złącze obsługuje 1 Port drukarki
USB3.0 urządzeń (przez Asmedia ASM1042)
USB2.0/USB1.X urządzeń (przez SB850)
Gniazdo audio
Wymiary
płyty
233 mm (S) X 244 mm (W)
Obsluga
systemu
operacyjne
go
x3
uATX
Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista / 7
odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.
57
Motherboard Manual
RUSSIAN
СПЕЦ
CPU
(центральн
ый
Гнездо AM3
Архитектура AMD 64 разрешать обработка
Процессоры AMD Sempron / Phenom II /
данных на 32 и 64 бит
процессор) Athlon II
FSB
Поддержка Hyper Transport 3.0
Поддержка HyperTransport 3.0 с
пропускной способностью до 5.2 GT/s
Набор
AMD 880G
микросхем AMD SB850
Слоты DDR3 DIMM x 4
Основная
Максимальная ёмкость памяти 16 ГБ
память
Каждый модуль DIMM поддерживает
512МБ/1ГБ/2ГБ/4ГБ DDR3
Модуль памяти с двухканальным режимом DDR3
Поддержка DDR3 800 / 1066 / 1333
Поддержка DDR3 1600 (OC)
Максимальная совместно используемая видео
Графика
AMD 880G (Radeon HD4250)
память составляет 512 МБ
Поддержка DVI/HDMI/UVD2/HDCP
Super I/O
ITE 8728
Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые
Аппаратный монитор
действующие функциональные
Регулятор скорости
возможности Super I/O.
Функция ITE "Smart Guardian"
Интерфейс с низким количеством выводов (Интеллектуальная защита)
SATA III
Встроенное последовательное устройство
управления ATA
Локальная
сеть
скорость передачи данных до 6 гигабит/с.
Соответствие спецификации SATA версия 3.0
Поддержка RAID 0,1,5,10
Автоматическое согласование 10 / 100 / 1000
Realtek RTL8111E
Мб/с
Частичная / полная дуплексная способность
Звуковой
кодек
Звуковая поддержка High-Definition
ALC892
5.1канальный звуковой выход
Слот PCI
x2
Слот PCI Express Gen2 x16
x1
Встроенны Разъём SATA
й разъём
Разъём на лицевой панели
x6
Каждый разъём поддерживает 1 устройство SATA
x1
Поддержка устройств на лицевой панели
Слоты
58
TA880GU3+
СПЕЦ
Входной звуковой разъём
x1
Разъём вывода для S/PDIF
x1
панели
Поддержка вывода цифровой звуковой функции
Источник питания для вентилятора центрального
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы
Поддержка звуковых функций на лицевой
x2
процессора (с функцией интеллектуального
вентилятора)
Источник питания для вентилятора системы
Открытое контактирующее
приспособление CMOS
x1
USB-разъём
x3
Разъём Порт подключения
принтера
x1
Последовательный порт
x1
Разъём едока ИКЫЙ
x1
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
x1
Порт HDMI
x1
Порт VGA
x1
Задняя
Порт DVI-D
x1
панель
Порт LAN
x1
USB 2.0-порт
x2
USB 3.0-порт
x2
ввода-выв
ода
лицевой панели
Каждый разъём поддерживает 1 Порт
Клавиатура / Мышь PS/2
средств
Каждый разъём поддерживает 2 USB-порта на
подключения принтера
USB3.0 устройств (по Asmedia ASM1042)
USB2.0/USB1.X устройств (по SB850)
Гнездо для подключения
наушников
Размер
панели
Поддержка
OS
x3
233 мм (Ш) X 244 мм (В)
uATX
Windows XP / Vista / 7
удалять средства обеспечения для OS с или без
Biostar сохраняет за собой право добавлять или
предварительного уведомления.
59
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫‪AM3‬ﻡﻘﺒﺲ‬
‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬
‫اﻟﻤﺮآﺰﻳﺔ‬
‫‪AMD Sempron / Phenom II / Athlon II‬ﻡﻌﺎﻟﺠﺎت‬
‫و ‪Hyper Transport3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪ 5.2 GT/s‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪AMD 880G‬‬
‫‪AMD SB850‬‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﻋﺪد‪4‬‬
‫ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 16‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫و‪ /1‬و‪ /2‬و‪ 4‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻣﺎت‬
‫ﺳﻌﺎت ‪ 1333 / 1066 / 800‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﺳﻌﺎت ‪ 1600‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ)‪DDR3(OC‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﻣﻴﺠﺎ ﺑﺎﻳﺖ‪512‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫)‪AMD 880G (Radeon HD4250‬‬
‫‪HDCP/UVD2/HDMI/DVI‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫‪ITE 8728‬‬
‫‪Super I/O‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 6‬ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪SATA III‬‬
‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬
‫‪Realtek RTL8111E‬‬
‫آﻮدﻳﻚ اﻟﺼﻮت‬
‫‪ALC892‬‬
‫‪ 3.0‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪RAID 0,1,5,10‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺛﺎﻧﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺛﺎﻧﻴﺔ‬
‫إﻣﻜﺎﻧﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫اﻟﻔﺘﺤﺎت‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫اﻟﻠﻮﺣﺔ‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪ‪2‬‬
‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ‪SATA‬‬
‫ﻋﺪد‪6‬‬
‫‪SATA‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻡﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬
‫‪60‬‬
‫‪TA880GU3+‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪ‪2‬‬
‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ‪USB‬‬
‫ﻋﺪد ‪3‬‬
‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد‪1‬‬
‫ﻡﻨﻔﺬ اﻷﺣﻤﺮ ﺗﺤ ﺖ ﻡﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺏﺎﺏﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ ‪ /‬ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪HDMI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪DVI-D‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‪USB‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ‬
‫ﻋﺪ‪1‬‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬
‫ﻡﻨﺎﻓﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﺎﻓﺬ ‪USB3.0‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪3‬‬
‫‪USB3.0‬اﻷﺝﻬﺰة ) ﻗﺒ ﻞ ﻡﻦ ‪(Asmedia ASM1042‬‬
‫‪USB2.0/USB1.X‬اﻷﺝﻬﺰة ) ﻗﺒ ﻞ ﻡﻦ ‪(SB850‬‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬
‫‪ 233‬ﻡﻢ )ﻋﺮض( ‪ 244 X‬ﻡﻢ )ارﺗﻔﺎع(‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪Windows XP / Vista / 7‬‬
‫‪uATX‬‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬
‫‪61‬‬
Motherboard Manual
JAPANESE
仕様
Socket AM3
CPU
AMD 64アーキテクチャでは、32ビットと64ビット計算が
AMD Sempron / Phenom II / Athlon II プロセ 可能です
ッサ
FSB
ハイパートランスポート3.0サポートします
5.2 GT/sのバンド幅までハイパートランスポート
3.0をサポートします
AMD 880G
チップセット
AMD SB850
DDR3 DIMMスロット x 4
デュアル チャンネルモードDDR3メモリモジュール
最大メモリ容量16GB
メインメモリ
各DIMMは 512MB/1GB/2GB/4GB DDR3をサ
DDR3 800 / 1066 / 1333 をサポート
DDR3 1600 をサポート (OC)
ポート
グラフィック
ス
Super I/O
最大の共有ビデオメモリは512MBです
AMD 880G (Radeon HD4250)
DVI/HDMI/UVD2/HDCP のサポート
ITE 8728
環境コントロールイニシアチブ、
もっとも一般に使用されるレガシーSuper I/O機
H/Wモニター
能を採用しています。
ファン速度コントローラ/ モニター
低ピンカウントインターフェイス
ITEの「スマートガーディアン」機能
最高6 Gb/秒のデータ転送速度
SATA III
SATAバージョン3.0仕様に準拠。
統合シリアルATAコントローラ
RAID 0,1,5,10のサポート
LAN
10 / 100 / 1000 Mb/秒のオートネゴシエーション
Realtek RTL8111E
半/全二重機能
サウンド
Codec
ハイデフィニションオーディオのサポート
ALC892
5.1 チャンネルオーディオアウト
PCIスロット
x2
PCI Express Gen2 x16スロット
x1
スロット
オンボードコ SATAコネクタ
x6
各コネクタは1つのSATAデバイスをサポートします
ネクタ
フロントパネルコネクタ
x1
フロントパネル機能をサポートします
フロントオーディオコネクタ
x1
フロントパネルオーディオ機能をサポートします
S/PDIFアウトコネクタ
x1
デジタルオーディオアウト機能をサポートします
62
TA880GU3+
仕様
CPUファンヘッダ
x1
CPUファン電源装置(スマートファン機能を搭載)
システムファンヘッダ
x2
システムファン電源装置
CMOSクリアヘッダ
x1
USBコネクタ
x3
各コネクタは2つのフロントパネルUSBポートをサポート
します
背面パネル
I/O
プリンタポートコネクタ
x1
シリアルポート
x1
消費者IRコネクタ
x1
電源コネクタ(24ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード / マウス
x1
HDMIポート
x1
VGAポート
x1
DVI-Dポート
x1
LANポート
x1
USB 2.0ポート
x2
USB 3.0ポート
x2
各コネクタは1つのプリンタポートをサポートします
USB3.0デバイス (で Asmedia ASM1042)
USB2.0/USB1.Xデバイス (で SB850)
オーディオジャック
ボードサイズ 233 mm (幅) X 244 mm (高さ)
OSサポート Windows XP / Vista / 7
x3
uATX
Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。
2010/12/06
63
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement