Biostar TZ77XE4 Owner's Manual

Biostar TZ77XE4 Owner's Manual
TZ77XE4 Setu p Ma nu al
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5
Before You Start......................................................................................... 1
Package Checklist ..................................................................................... 1
Motherboard Features .............................................................................. 2
Rear Panel Connectors.............................................................................. 4
Motherboard Layout................................................................................. 5
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ............................................... 6
FAN Headers .............................................................................................. 8
Installing System Memory ........................................................................ 9
Connectors and Slots................................................................................ 11
3.1
3.2
How to Setup Jumpers............................................................................. 15
Detail Settings .......................................................................................... 15
4.1
4.2
4.3
4.4
Operating System .................................................................................... 20
Raid Arrays............................................................................................... 21
How RAID Works ..................................................................................... 22
Smart Response Technology ................................................................... 26
5.1
5.2
T-Series UEFI BIOS ................................................................................... 27
T-Series Software...................................................................................... 30
6.1
6.2
6.3
6.4
Driver Installation Note .......................................................................... 42
Extra Information .................................................................................... 43
AMI BIOS Post Code................................................................................. 44
Troubleshooting ....................................................................................... 46
Chapter 2: Hardware Installation .......................... 6
Chapter 3: Headers & Jumpers Setup .................. 15
Chapter 4: RAID / AHCI Functions....................... 20
Chapter 5: T-Series UEFI BIOS & Software........... 27
Chapter 6: Useful Help ........................................ 42
Appendix: SPEC In Other Languages ................... 47
German .................................................................................................................. 48
French .................................................................................................................... 50
Italian..................................................................................................................... 52
Spanish ................................................................................................................... 54
Portuguese ............................................................................................................ 56
Polish ...................................................................................................................... 58
Russian ................................................................................................................... 60
Arabic..................................................................................................................... 62
Japanese ................................................................................................................ 64
TZ7 7 X E4
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
„
„
„
„
„
„
1.2
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
PACKAGE CHECKLIST
Serial ATA Cable X 4
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver DVD X 1
SLI Bridge X 1
CFX Bridge X 1
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
SPEC
Supports Execute Disable Bit / Enhanced Intel
Socket 1155
CPU
Intel Core i7 / i5 / i3 / Pentium / Celeron
processor
Chipset
SpeedStep® / Intel Architecture-64 / Extended
Memory 64 Technology / Virtualization Technology /
Hyper Threading
Intel Z77
IT8728
Environment Control initiatives,
Provides the most commonly used legacy
Hardware Monitor Controller
Super I/O functionality.
Fan Speed Controller
Low Pin Count Interface
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 4
Dual Channel Mode DDR3 memory module
Main
Max Memory Capacity 32GB
Supports DDR3 1066 / 1333 / 1600
Memory
Each DIMM supports 512MB/
Supports DDR3 1866(OC) / 2133(OC) / 2400(OC)
1GB/2GB/4GB/8GB DDR3
Registered DIMM and ECC DIMM is not supported
Super I/O
Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.
SATA 2 & 3 Integrated Serial ATA Controller
SATA Version 2.0 / 3.0 specification compliant
RAID 0,1,5,10, SRT support
LAN
Sound
Codec
USB3.0
10 / 100 Mb/s / 1Gb/s auto negotiation
Realtek RTL 8111E
Half / Full duplex capability
7.1 channels audio out
ALC898
High Definition Audio
Z77
PCI slot
Data transfer rates up to 600 MB/s
x2
PCI Express Gen3 x 16 slot
Slots
On Board
Connectors
2
Supports PCI expansion cards
Supports PCI-E Gen3 x16 expansion card (Supports
(Depending on CPU)
x2
SLI / CFX)
PCI Express Gen2 x 16 slot(x4)
x1
Supports PCI-E Gen2 x16 expansion card
PCI Express Gen2 x 1 slot
x1
Supports PCI-E Gen2 x1 expansion cards
SATA3 Connector
x4
Each connector supports 1 SATA3 devices
SATA2 Connector
x4
Each connector supports 1 SATA2 devices
Front Panel Connector
x1
Supports front panel facilities
Front Audio Connector
x1
Supports front panel audio function
TZ7 7 X E4
SPEC
Back Panel
I/O
CPU Fan Header
x1
CPU Fan power supply (with Smart Fan function)
System Fan Header
x2
System Fan Power supply
Clear CMOS Header
x1
Restore CMOS data to factory default
USB2.0 Connector
x2
Each connector supports 2 front panel USB2.0 ports
USB3.0 Connector
x1
Each connector supports 2 front panel USB3.0 ports
Consumer IR Connector
x1
Supports infrared function
Serial Port Connector
x1
Connects to RS-232 Port
S/PDIF out Connector
x1
Supports digital audio out function
Power Connector (24pin)
x1
Connects to Power supply
Power Connector (8pin)
x1
Connects to Power supply
PS/2 Keyboard
x1
Connects to PS/2 Keyboard
HDMI Port
x1
Connects to HDMI cable
Display Port
x1
Connects to DP cable
VGA Port
x1
Connect to D-SUB monitor
DVI Port
x1
Connect to DVI monitor
eSATA Port
x1
Connect to SATA devices (Sharing ths same SATA
channel with SATA3–U)
Board Size
LAN port
x1
Connect to RJ-45 ethernet cable
USB2.0 Port
x4
Connect to USB2.0 devices
USB3.0 Port
x2
Connect to USB3.0 devices
Audio Jack
x6
Provide Audio-In/Out and Mic. connection
244 (W) x 305 (L) mm
OS Support Windows XP / Vista / 7
ATX
Biostar reserves the right to add or remove support
for any OS with or without notice
3
Motherboard Manual
1.4
REAR PANEL CONNECTORS
PS/2
Keyboard
VGA
LAN
eSATA
Display Port
USB2.0X2
HDMI
DVI-D
USB3.0X2 USB2.0X2
Center
Line In
Rear
Line Out
Side
Mic In
NOTE:
USB3.0 (only supported by Windows 7) ports are backward compatible with
USB2.0/USB1.X devices.
NOTE:
Maximum resolution:
HDMI: 1920 x 1200 @60Hz, compliant with HDMI 1.4a
DVI: 1920 x 1200 @60Hz
VGA: 2048 x 1536 @75Hz
Display Port: 2560x1600 @60MHz, compliant with Display Port 1.1a
NOTE:
This motherboard supports dual video output:
Display Devices
z
z
z
z
z
4
VGA
DVI-D
HDMI
Display Port
VGA
X
A
A
A
DVI-D
A
X
S1, C, E
A
HDMI
A
S1, C, E
X
A
Display Port
A
A
A
X
A = Single Pipe Single Display, Intel® Dual Display Clone (Only 24-bpp), or
Extended Desktop Mode
C = Clone Mode
E = Extended Desktop Mode
1
S = Single Pipe Single Display With One Display Device Disabled
X = Unsupported / Note Applicable
TZ7 7 X E4
1.5
MOTHERBOARD LAYOUT
USB_KBMS1
CPU_FAN1
HDMI_DP1
ATXPW R1
DDR3_ B2
DDR3_B1
CPU 1
DDR3_A2
DDR3_A1
DVI1
VGA1
Socket 1155
DUALUSB
_ESATA1
RJ45USB1
AUDIO1
ATXPWR2
PEX16_1
BIOS
SATA3
PEX16_2
BAT1
PCI1
PCI2
SATA4
CODE C_LE D_D1
CO DEC_LE D_D2
CODEC
SATA2
Intel
Z77
PEX1_1
F_AUDIO1
SATA1
LAN
Super
I/O
JFRONT_USB3_1
PEX16_3
CL_CMOS_BTN
JSPDIFOUT1
SYS_FAN1
CIR1
J_COM1
F_USB1
F_USB2 SYS_FAN2
RST_BTN
PWR_BTN
PANEL1
Note: ■ represents the 1st pin.
5
Motherboard Manual
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Notice:
1.
2.
Remove Pin Cap before installation, and make good preservation for future use.
When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin
legs won’t be damaged.
The motherboard might equip with two different types of pin cap. Please refer
below instruction to remove the pin cap.
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up.
Step 2: Remove the Pin Cap.
6
TZ7 7 X E4
Step 3: Hold processor with your thumb and index fingers, oriented as
shown. Align the notches with the socket. Lower the processor
straight down without tilting or sliding the processor in the socket.
Step 4: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.
7
Motherboard Manual
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
4
1
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control
SYS_FAN1/SYS_FAN2: System Fan Headers
Pin
1
2
3
S YS _FA N1 S YS _FA N2
1
Assignment
Ground
+12V
FAN RPM
rate sense
3
Note:
The SYS_FAN1/SYS_FAN2 support 3-pin head connectors; the CPU_FAN1 supports
4-pin head connector. When connecting with wires onto connectors, please note that the
red wire is the positive and should be connected to pin#2, and the black wire is Ground
and should be connected to GND.
8
TZ7 7 X E4
2.3
INSTALLING SYSTEM MEMORY
DDR3_B1
DDR3_B2
DDR3_A1
DDR3_A2
A. Memory Modules
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Note:
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
9
Motherboard Manual
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB/8GB
DDR3_A2
512MB/1GB/2GB/4GB/8GB
DDR3_B1
512MB/1GB/2GB/4GB/8GB
DDR3_B2
512MB/1GB/2GB/4GB/8GB
Total Memory
Size
Max is 32GB.
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
Enabled
O
X
O
X
Enabled
X
O
X
O
Enabled
O
O
O
O
Enabled
O
X
X
O
Enabled
X
O
O
X
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
10
TZ7 7 X E4
2.4
CONNECTORS AND SLOTS
SATA1~SATA4: Serial ATA Connectors
This motherboard provides several SATA controllers for connecting to SATA
devices with respective spec and transfer rates as bellows:
CONNECTOR
BY CHIP
SPEED
Support
SATA1-U/L
Intel Z77
6 Gb/s.
RAID 0 / 1 / 5 / 10 and Intel SRT
SATA2-U/L ; SATA3-U/L
Intel Z77
3 Gb/s.
RAID 0 / 1 / 5 / 10 and Intel SRT
SATA4 PM1-U/PM0-L
ASM1061
6 Gb/s.
AHCI
SATA 4 PM1- U SATA3-U SATA2-U SATA1-U
SATA4 PM0- L
(By ASM1061)
SATA3-L SATA2-L SATA1-L
(By Intel Z77)
NOTE:
SATA 3-U shares the same SATA Channel with eSATA; therefore, SATA 3-U will be
disabled if eSATA is installed with any SATA device. User can configure which port is
available by BIOS setting.
NOTE:
SATA4 PM0-L / PM1-U do not support uEFI OS.
11
Motherboard Manual
PEX16_1/ PEX16_2: PCI-Express Gen3 x16 (x16 / x8) (Nvidia SLI
and AMD CrossFireX) Slots
-
PCI-Express 3.0 compliant.
Maximum theoretical realized bandwidth of 16GB/s simultaneously per
direction, for an aggregate of 32GB/s totally.
The speed of PEX16_1 is x16, or x8 when SLI / CFX is enabled; the speed
of PEX16_2 is x8.
PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU.
Note:
For more details about Nvidia SLI and AMD CrossFireX, please access the
website, respectively: http://www.nvidia.com/page/support.html, and
http://support.amd.com/us/Pages/AMDSupportHub.aspx .
PEX16_3: PCI-Express Gen2 x4 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 2GB/s simultaneously per
direction, for an aggregate of 4GB/s totally.
PEX1_1: PCI-Express Gen2 x1 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
P EX1 6_ 1
PEX 1_ 1
P EX1 6_ 2
P EX1 6_ 3
12
TZ7 7 X E4
PCI1/PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI 1
PCI2
ATXPWR1: ATX Power Source Connectors
These connectors provide +12V to CPU power circuit. If the CPU power plug is
4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2.
8
5
4
1
Pin
1
2
3
4
5
6
7
8
Assignment
+12V
+12V
+12V
+12V
Ground
Ground
Ground
Ground
13
Motherboard Manual
ATXPWR2: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
12
24
1
13
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
Note:
Before you power on the system, please make sure that ATXPWR1 and ATXPWR2
connectors have been well plugged-in.
14
TZ7 7 X E4
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
POW_LED
On/Off
++ -
9
1
16
8
+ SPK
RST
HLED
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
15
Motherboard Manual
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
F_ USB 1 F_ US B2
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
VBUS0
SSRX1SSRX1+
Ground
SSTX1SSTX1+
Ground
D1D1+
ID
1
10
20
11
Pin
11
12
13
14
15
16
17
18
19
20
NOTE: USB3.0 is only supported by Windows 7.
16
Assignment
D2+
D2Ground
SSTX2+
SSTX2Ground
SSRX2+
SSRX2VBUS1
Key
TZ7 7 X E4
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
1
Assignment
+5V
SPDIF_OUT
Ground
3
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
Pin
1
2
3
4
5
6
Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power
2 6
1 5
17
Motherboard Manual
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
2
10
1
9
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
BIOS POST Code/CPU Temperature Indicator
This indicator will show POST code while booting. After the booting sequence,
it will show current CPU temperature through hexadecimal figure. Please
refer to Chapter 6.3 for all the BIOS POST codes.
18
TZ7 7 X E4
On-Board Buttons
There are 3 on-board buttons.
CL_CMOS_BTN
RST_BTN
PWR_BTN
PWR_BTN:
This is an on-board Power Switch button.
RST_BTN:
This is an on-board Reset button.
CL_CMOS_BTN: Clear CMOS Button
You can use this button to reset the BIOS to default.
19
Motherboard Manual
CHAPTER 4: RAID / AHCI FUNCTIONS
4.1
OPERATING SYSTEM
SATA
CHIP
Controller
OS
Configuration
Intel Z77
SATA1-U/SATA1-L/
SATA2-U/SATA2-L/
SATA3-U/SATA3-L/
eSATA
Intel Z77
SATA1-U/SATA1-L/
SATA2-U/SATA2-L/
SATA3-U/SATA3-L/
eSATA
AHCI
ASM1061
AHCI
Windows XP SP2 (32 and 64 bit)
Windows Vista SP2 (32 and 64 bit)
Windows 7 (32 and 64 bit)
RAID
Windows XP SP2 (32 and 64 bit)
Windows Vista SP2 (32 and 64 bit)
Windows 7 (32 and 64 bit)
Windows XP SP2 (32 and 64 bit)
SATA4 PM1-U/
Windows Vista SP2 (32 and 64 bit)
SATA4 PM0-L
Windows 7 (32 and 64 bit)
The 'F6 Method'+ to enable RAID / AHCI Driver when installing Windows XP
1.
Before you start Windows installation, copy the proper files for the Windows
version on USB floppy.
Windows XP 32
Windows XP 64
SATA1-U/SATA1-L/
SATA2-U/SATA2-L/
SATA3-U/SATA3-L/
eSATA
AHCI/RAID Driver
Path
x:\Driver\Chipset\Intel\S
ATA\7\F6flpy32\Driver\
x:\Driver\Chipset\Intel\S
ATA\7\F6flpy64\Driver\
SATA4 PM1-U/
SATA4 PM0-L
AHCI Driver Path
x:\Driver\\SATA\Asmedia\
F6\Xp\Driver\
x:\Driver\\SATA\Asmedia\
F6\Xp\Driver\
2. When the operating system installation starts, follow Windows indication by
pressing F6 to load the driver.
20
TZ7 7 X E4
Enable RAID / AHCI Driver when installing Windows 7/Vista
1.
Before you start Windows installation, copy the proper files for the Windows
version to any USB storage.
Windows 7 32
Windows 7 64
Windows Vista 32
Windows Vista 64
SATA1-U/
SATA1-L/
SATA2-U/
SATA2-L/
SATA3-U/
SATA3-L/
eSATA
AHCI/RAID
Driver Path
x:\Driver\Chipset\
Intel\SATA\7\F6flpy
32\Driver\
x:\Driver\Chipset\
Intel\SATA\7\F6flpy
64\Driver\
x:\Driver\Chipset\
Intel\SATA\7\F6flpy
32\Driver\
x:\Driver\Chipset\
Intel\SATA\7\F6flpy
64\Driver\
SATA4 PM1
-U/SATA4 PM0
-L
AHCI Driver
Path
x:\Driver\\SATA\
Asmedia\F6\Win7\
Driver\x86\
x:\Driver\\SATA\
Asmedia\F6\Win7\
Driver\x64
x:\Driver\SATA\
Asmedia\F6\V ista\
Driver\x86\
x:\Driver\SATA\
Asmedia\F6\V ista\
Driver\x64\
2. Follow Window 7 / Vista indication to load the driver in the installation process.
4.2
RAID ARRAYS
CONNECTOR
BY CHIP
SPEED
Support
SATA2-U/SATA2-L/SATA3-U/
Intel Z77
3 Gb/s.
RAID 0 / 1 / 5 / 10
Intel Z77
6 Gb/s.
RAID 0 / 1 / 5 / 10
SATA3-L/eSATA
SATA1-U/SATA1-L
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write
times for many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
21
Motherboard Manual
4.3
HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Block 1
Block 3
Block 5
22
Block 2
Block 4
Block 6
TZ7 7 X E4
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
Block 1
Block 2
Block 3
23
Motherboard Manual
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­
­
­
­
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Block 3
Block 5
24
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
TZ7 7 X E4
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.
Features and Benefits
­
­
­
­
­
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
25
Motherboard Manual
4.4
INTEL SMART RESPONSE TECHNOLOGY
With Intel(R) Smart Response Technology, the performance of RAID with an Intel
SSD drive can be improved better.
Installing Smart Response Technology
1. Install RAID drives (RAID 0, 1, 5) and an Intel SSD.
2. Activate RAID mode from BIOS, and install operating system.
3. Insert the Setup DVD to the optical drive, and Install all drivers (including
Intel(R) Smart Response Technology Driver). After all processes finish,
reboot the system.
4. Intel(R) SRT service icon will show in notification area. Double click it to
open the main windows.
5. Select “Accelerate” page, and make sure the status of accelerated device
has been enabled accelerated.
26
TZ7 7 X E4
CHAPTER 5: T-SERIES UEFI BIOS & SOFTWARE
5.1
T-SERIES UEFI BIOS
T-Series UEFI BIOS Features
Overclocking Navigator Engine (O.N.E.)
Self Recovery System (S.R.S)
Smart Fan Function
BIO-Flasher: Update UEFI BIOS file from USB Flash Drive
!! WARNING !!
For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below
in this manual is for your reference only and the actual UEFI BIOS
information and settings on board may be different from this
manual. For further information of setting up the UEFI BIOS,
please refer to the UEFI BIOS Manual in the Setup DVD.
A. Overclocking Navigator Engine (O.N.E.)
O.N.E provides 4 systems allowing users to customize personal overclock
settings: Manual CPU System, Manual Memory System, Manual PWM
System, and Manual Voltage System.
Notice:
Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
27
Motherboard Manual
NOTE
Overclock is an optional process, but not a “must-do” process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.
B. Self Recovery System (S.R.S.)
This function can’t be seen under UEFI BIOS setup, and is always on whenever
the system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default UEFI
BIOS setting, and all overclock settings will be re-configured.
C. Smart Fan Function
Smart Fan Function is under “Smart Fan Control” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
↓
28
TZ7 7 X E4
CPU Smart FAN
This item allows you to control the CPU Smart Fan function.
CPU FAN Calibrate
Press [ENTER] to calibrate CPU FAN.
Control Mode
This item provides several operation modes of the fan.
Fan Ctrl OFF(℃)
When CPU temperature is lower than this value, the CPU fan will keep
lowest RPM. The range is from 0~127, with an interval of 1.
Fan Ctrl On(℃)
When CPU temperature is higher than this value, the CPU fan controller
will turn on. The range is from 0~127, with an interval of 1.
Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value. The range is from 0~127, with
an interval of 1.
Fan Ctrl Sensitive
The bigger the numeral is, the higher the FAN speed is. The range is from
0~127, with an interval of 1.
29
Motherboard Manual
5.2
T-SERIES SOFTWARE
Installing T-Series Software
6. Insert the Setup DVD to the optical drive. The driver installation program
would appear if the Auto-run function has been enabled.
7. Select Software Installation, and then click on the respective software
title.
8. Follow the on-screen instructions to complete the installation.
Launching T-Series Software
After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.
TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status. This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The illustration below is for reference only)
30
TZ7 7 X E4
The CPU tab provides information on the CPU and motherboard.
The Memory tab provides information on the memory module(s).
You can select memory module on a specific slot to see its information.
The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:
31
Motherboard Manual
3 Pre-set Modes: V6, V12, AUTO for different overclocking experience.
The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.
32
TZ7 7 X E4
Pressing TOVERCLOCKER logo
displays information about
manufacturer and software version.
You can update current version by
clicking the button “Live Update.”
Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)
Typical Mode
Display manufacturer &
software version information
Performance
Mode
Medium Mode
Maxi-Energy Mode
Auto P hase Mode
Reset Time &
Consumption
Display CPU
information
33
Motherboard Manual
G.P.U Mode Setting
This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.
Note: Even if the modes saving more power consumption are chosen, the
system still can keep excellent performance.
34
„
Auto Phase Mode
System switches the mode automatically according to current system
loading condition.
„
Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.
„
Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.
„
Medium Mode
This is the standard system power saving mode.
„
Maxi-Energy Mode
This is the best system performance mode.
TZ7 7 X E4
Guide of Lucid VIRTU MVP Installation
With Lucid VIRTU MVP solution, the resource and performance of graphics
can be integrated so that user can choose the suitable mode for the
requirement.
System Requirements
„ CPU: CPU with integrated graphics support
„ Chipset: Any chipset with integrated graphics output
„ Discrete GPU: Any Nvidia/AMD GPU with DX9/DX10/DX11
support
„ Memory Size: 2GB
„ Operating System: Windows 7 32-bit and 64-bit
„ Hard Disk Space: 20MB
BIOS Setting
Please try to set Onboard VGA (IGD) as first display if you want to use the
i-mode.
i-Mode & d-Mode
1. i-Mode: i-Mode provides user with near zero performance overhead on
3D graphics games, Virtual VSync and Hyperformance features,
integrated GPU special features and power saving options
when no 3D gaming is used. To use Lucid VIRTU Universal
MVP solution in i-Mode, display must be always connected to
motherboard video output.
2. d-Mode: d-Mode is provided for demanding 3D gamers to achieve
uncompromised 3D performance of discrete GPU installed in
the system, along with Virtual VSync and Hyperformance
quality/performance improvement features. In this mode, Virtu
Universal MVP allows user to utilize integrated GPU special
features such as trascoding, while display is connected to
discrete GPU.
Note1: In most cases the differences of 3D performance between i-Mode and d-Mode are
unnoticeable to the user, so it is recommended to use i-mode to save power.
Note2: To use Lucid VIRTU Universal MVP solution in d-Mode, display must be connected to
discrete GPU installed in the system.
35
Motherboard Manual
Software Installation
1. Install VGA Driver and VIRTU
MVP Software.
2. If for some reason auto-activation
process fails, or the internet is not
available for 30 days, user will
have to manually activate Virtu
Universal MVP by pressing
“Activate” button through the
Internet.
3. When Virtu Universal MVP
successfully activates, the screen
will look like this.
4. After installation, please restart
the computer. The left screenshot
is control panel.
36
TZ7 7 X E4
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represent s import ant
*information
that you
must provide. Without
this informat ion, you may
not be able to send out
the mail.
This block will show
the information which
would be collect ed in
the mail.
condition
* Describe
of your system.
your area or
* Select
the area close to you.
Provide the e-mail
address that you would
like to send t he copy to.
the name of
* Provide
the memory module
manufacturer.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
37
Motherboard Manual
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
38
TZ7 7 X E4
BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS
Show current BIOS information
AMI BIOS
Clear CMOS function
(Only for AWARD BIOS)
Save current BIOS
to a .bin file
Update BIOS
with a BIOS file
<Backup BIOS>
Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.
39
Motherboard Manual
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this
manual.
40
TZ7 7 X E4
BIOScreen Utility (Optional)
This utility allows you to personalize your boot logo easily. You can choose
JPG or BMP as your boot logo so as to customize your computer.
Please follow the following instructions to update boo logo:
1. Load Image:Choose the picture as the boot logo.
2. Transform:Transform the picture for BIOS and preview the result.
3. Update Bios:Write the picture to BIOS Memory to complete the update.
41
Motherboard Manual
CHAPTER 6: USEFUL HELP
6.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver DVD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the DVD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver DVD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
DVD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
42
TZ7 7 X E4
6.2
EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
43
Motherboard Manual
6.3
AMI BIOS POST CODE
Checkpoint
03
04
05
06
07
08
C0
C1
C2
C5
C6
C7
0A
0B
0C
0E
13
20
24
2A
2C
2E
31
33
44
Description
Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS,
POST, Runtime data area. Also initialize BIOS modules on POST entry and
GPNV area. Initialized CMOS as mentioned in the Kernel Variable
"wCMOSFlags."
Check CMOS diagnostic byte to determine if battery power is OK and
CMOS checksum is OK. Verify CMOS checksum manually by reading
storage area. If the CMOS checksum is bad, update CMOS with power-on
default values and clear passwords. Initialize status register A.
Initializes data variables that are based on CMOS setup questions.
Initializes both the 8259 compatible PICs in the system
Initializes the interrupt controlling hardware (generally PIC) and interrupt
vector table.
Do R/W test to CH-2 count reg. Initialize CH-0 as system timer. Install the
POSTINT1Ch handler. Enable IRQ-0 in PIC for system timer interrupt.
Traps INT1Ch vector to "POSTINT1ChHandlerBlock."
Fixes CPU POST interface calling pointer.
Initializes the CPU. The BAT test is being done on KBC. Program the
keyboard controller command byte is being done after Auto detection of
KB/MS using AMI KB-5.
Early CPU Init Start -- Disable Cache – Init Local APIC.
Set up boot strap processor Information.
Set up boot strap processor for POST.
Enumerate and set up application processors.
Re-enable cache for boot strap processor.
Early CPU Init Exit.
Initializes the 8042 compatible Key Board Controller.
Detects the presence of PS/2 mouse.
Detects the presence of Keyboard in KBC port.
Testing and initialization of different Input Devices. Also, update the Kernel
Variables.
Traps the INT09h vector, so that the POST INT09h handler gets control for
IRQ1. Uncompress all available language, BIOS logo, and Silent logo
modules.
Early POST initialization of chipset registers.
Relocate System Management Interrupt vector for all CPU in the system.
Uncompress and initialize any platform specific BIOS modules. GPNV is
initialized at this checkpoint.
Initializes different devices through DIM.
See DIM Code Checkpoints section of document for more information.
Initializes different devices. Detects and initializes the video adapter
installed in the system that have optional ROMs.
Initializes all the output devices.
Allocate memory for ADM module and uncompress it. Give control to ADM
module for initialization. Initialize language and font modules for ADM.
Activate ADM module.
Initializes the silent boot module. Set the window for displaying text
information.
TZ7 7 X E4
Checkpoint
37
38
39
3A
3B
3C
40
52
60
75
78
7C
84
85
87
8C
8D
8E
90
A1
A2
A4
A7
A9
AA
AB
AC
B1
00
Description
Displaying sign-on message, CPU information, setup key message, and any
OEM specific information.
Initializes different devices through DIM. See DIM Code Checkpoints section
of document for more information. USB controllers are initialized at this
point.
Initializes DMAC-1 & DMAC-2.
Initialize RTC date/time.
Test for total memory installed in the system. Also, Check for DEL or ESC
keys to limit memory test. Display total memory in the system.
Mid POST initialization of chipset registers.
Detect different devices (Parallel ports, serial ports, and coprocessor in
CPU, etc.) successfully installed in the system and update the BDA,
EBDA…etc.
Updates CMOS memory size from memory found in memory test. Allocates
memory for Extended BIOS Data Area from base memory. Programming the
memory hole or any kind of implementation that needs an adjustment in
system RAM size if needed.
Initializes NUM-LOCK status and programs the KBD typematic rate.
Initialize Int-13 and prepare for IPL detection.
Initializes IPL devices controlled by BIOS and option ROMs.
Generate and write contents of ESCD in NVRam.
Log errors encountered during POST.
Display errors to the user and gets the user response for error.
Execute BIOS setup if needed / requested. Check boot password if installed.
Late POST initialization of chipset registers.
Build ACPI tables (if ACPI is supported).
Program the peripheral parameters. Enable/Disable NMI as selected.
Initialization of system management interrupt by invoking all handlers.
Please note this checkpoint comes right after checkpoint 20h.
Clean-up work needed before booting to OS.
Takes care of runtime image preparation for different BIOS modules. Fill the
free area in F000h segment with 0FFh. Initializes the Microsoft IRQ Routing
Table. Prepares the runtime language module. Disables the system
configuration display if needed.
Initialize runtime language module. Display boot option popup menu.
Displays the system configuration screen if enabled. Initialize the CPU’s
before boot, which includes the programming of the MTRR’s.
Wait for user input at config display if needed.
Uninstall POST INT1Ch vector and INT09h vector.
Prepare BBS for Int 19 boot. Init MP tables.
End of POST initialization of chipset registers. De-initializes the ADM
module.
Save system context for ACPI. Prepare CPU for OS boot including final
MTRR values.
Passes control to OS Loader (typically INT19h).
45
Motherboard Manual
6.4
TROUBLESHOOTING
Probable
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
1.
Solution
1.
2.
3.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
System does not boot from a hard disk 1.
drive, but can be booted from optical
drive.
2.
System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Back up data and applications
files.
2.
Reformat the hard drive.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
46
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
TZ7 7 X E4
This page is intentionally left blank.
47
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Unterstützt Execute Disable Bit / Enhanced Intel
Socket 1155
CPU
Intel Core i7 / i5 / i3 / Pentium / Celeron
Prozessoren
Chipsatz
Hyper Threading
Umgebungskontrolle,
Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.
Lüfterdrehzahl-Controller/-Überwachung
Low Pin Count-Schnittstelle
"Smart Guardian"-Funktion von ITE
Dual-Kanal DDR3 Speichermodul
DDR3 DIMM-Steckplätze x 4
Unterstützt DDR3 1066 / 1333 / 1600
Arbeitsspeich Max. 32GB Arbeitsspeicher
er
Memory 64 Technology / Virtualization Technology /
Intel Z77
IT8728
Super E/A
SpeedStep® / Intel Architecture-64 / Extended
Unterstützt DDR3 1866(OC) / 2133(OC) / 2400(OC)
Jeder DIMM unterstützt 512MB/
registrierte DIMMs. ECC DIMMs werden nicht
1GB/2GB/4GB/8GB DDR3.
unterstützt.
Datentransferrate bis zu 3.0Gb/s / 6.0Gb/s.
SATA 2 & 3
Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0 / 3.0
Unterstützt RAID 0,1,5,10, SRT
LAN
10 / 100 / 1000 Mb/s Auto-Negotiation
Realtek RTL 8111E
Halb-/ Vollduplex-Funktion
HD
Unterstützt High-Definition Audio
Audio-Unters ALC898
7.1-Kanal-Audioausgabe
tützung
USB3.0
Steckplätze
Z77
Datenübertragungsraten bis zu 600 MB / s
PCI-Steckplatz
x2
PCI Express Gen3 x16 Steckplatz
x2
PCI Express Gen2 x16 Steckplatz(x4) x1
PCI Express Gen2 x 1-Steckplatz
x1
SATA3-Anschluss
x4
Jeder Anschluss unterstützt 1 SATA3-Laufwerk
Onboard-Ans SATA2-Anschluss
x4
Jeder Anschluss unterstützt 1 SATA2-Laufwerk
Fronttafelanschluss
x1
Unterstützt die Fronttafelfunktionen
Front-Audioanschluss
x1
Unterstützt die Fronttafel-Audioanschlussfunktion
chluss
48
TZ7 7 X E4
Spezifikationen
CPU-Lüfter-Sockel
x1
System-Lüfter-Sockel
x2
"CMOS löschen"-Sockel
x1
USB2.0-Anschluss
x2
USB3.0-Anschluss
x1
Verbraucher-IR Anschluss
x1
Serieller Anschluss
x1
CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Stromversorgungsanschluss
Jeder Anschluss unterstützt 2
Fronttafel-USB2.0-Anschlüsse
Jeder Anschluss unterstützt 2
Fronttafel-USB3.0-Anschlüsse
S/PDIF Ausgangsanschluss
x1
Stromanschluss (24-polig)
x1
Stromanschluss (8-polig)
x1
PS/2-Tastatur
x1
HDMI-Anschluss
x1
DP-Anschluss
x1
VGA-Anschluss
x1
Rückseiten-E DVI-Anschluss
x1
/A
eSATA Anschluss
x1
LAN-Anschluss
x1
USB2.0-Anschluss
x4
USB3.0-Anschluss
x2
Audioanschluss
x6
Platinengröße 244 mm (B) X 305 mm (L)
OS-Unterstüt
zung
Unterstützt die digitale Audioausgabefunktion
ATX
Biostar behält sich das Recht vor, ohne Ankündigung
Windows XP / Vista / 7
die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.
49
Motherboard Manual
FRENCH
SPEC
Prend en charge les technologies d'exécution de bit
Socket 1155
UC
Processeurs Intel Core i7 / i5 / i3 / Pentium /
Celeron
Chipset
Super E/S
de désactivation / Intel SpeedStep® optimisée/
d'architecture Intel 64 / de mémoire étendue 64 / de
virtualisation / Hyper Threading
Intel Z77
IT8728
Initiatives de contrôle environnementales,
Fournit la fonctionnalité de Super E/S
Moniteur de matériel
patrimoniales la plus utilisée.
Contrôleur /moniteur de vitesse de ventilateur
Interface à faible compte de broches
Fonction "Gardien intelligent" de l'ITE
Module de mémoire DDR3 à mode à double voie
Fentes DDR3 DIMM x 4
Prend en charge la DDR3 1066 / 1333 / 1600
Mémoire
Capacité mémoire maximale de 32 Go
Prend en charge la DDR3 1866(OC) / 2133(OC) /
principale
Chaque DIMM prend en charge des DDR3 de 2400(OC)
512Mo/1Go/2Go/4Go/8Go
Les DIMM à registres et DIMM avec code correcteurs
d'erreurs ne sont pas prises en charge
Taux de transfert jusqu'à 3.0Go/s / 6.0Go/s.
SATA 2 & 3 Contrôleur Serial ATA intégré :
Conforme à la spécification SATA Version 2.0 / 3.0
Prise en charge RAID 0,1,5,10, SRT
LAN
10 / 100 / 1000 Mb/s négociation automatique
Realtek RTL 8111E
Half / Full duplex capability
Prise en
charge
Prise en charge de l'audio haute définition
ALC898
Sortie audio à 7.1 voies
audio HD
USB3.0
Fentes
Connecteur
Z77
Taux de transfert de données jusqu'à 600 Mo / s
Fente PCI
x2
Fente PCI Express Gen3 x16
x2
Fente PCI Express Gen2 x16(x4)
x1
Fente PCI Express Gen2 x1
x1
Connecteur SATA3
x4
Connecteur SATA2
x4
Connecteur du panneau avant
x1
Prend en charge les équipements du panneau avant
Connecteur Audio du panneau avant x1
Prend en charge la fonction audio du panneau avant
embarqué
50
Chaque connecteur prend en charge 1 périphérique
SATA3
Chaque connecteur prend en charge 1 périphérique
SATA2
TZ7 7 X E4
SPEC
Embase de ventilateur UC
x1
Embase de ventilateur système
x2
Embase d'effacement CMOS
x1
Connecteur USB2.0
x2
Connecteur USB3.0
x1
Alimentation électrique du ventilateur UC (avec
fonction de ventilateur intelligent)
Alimentation électrique du ventilateur système
Chaque connecteur prend en charge 2 ports USB2.0
de panneau avant
Chaque connecteur prend en charge 2 ports USB3.0
de panneau avant
Connecteur de IR du consommateur x1
Port série
x1
Connecteur de sortie S/PDIF
x1
Connecteur d'alimentation
x1
Prend en charge la fonction de sortie audio
numérique
(24 broches)
Connecteur d'alimentation
x1
(8 broches)
E/S du
panneau
arrière
Dimensions
de la carte
Clavier PS/2
x1
Port HDMI
x1
Port DP
x1
Port VGA
x1
Port DVI
x1
Port eSATA
x1
Port LAN
x1
Port USB2.0
x4
Port USB3.0
x2
Fiche audio
x6
244 mm (l) X 305 mm (H)
Support SE Windows XP / Vista / 7
ATX
Biostar se réserve le droit d'ajouter ou de supprimer
le support de SE avec ou sans préavis
51
Motherboard Manual
ITALIAN
SPECIFICA
Supporto di Execute Disable Bit / Enhanced
Socket 1155
CPU
Processore Intel Core i7 / i5 / i3 /
Pentium / Celeron
Chipset
Tecnologia Extended Memory 64 / Tecnologia
Virtualization / Hyper Threading
Intel Z77
Funzioni di controllo dell’ambiente:
IT8728
Super I/O
Intel SpeedStep® / Architettura Intel 64 /
Fornisce le funzionalità legacy Super I/O Monitoraggio hardware
usate più comunemente.
Controller / Monitoraggio velocità ventolina
Interfaccia LPC (Low Pin Count)
Funzione "Smart Guardian" di ITE
Modulo di memoria DDR3 a canale doppio
Alloggi DIMM DDR3 x 4
Supporto di DDR3 1066 / 1333 / 1600
Memoria
Capacità massima della memoria 32GB
Supporto di DDR3 1866(OC) / 2133(OC) /
principale
Ciascun DIMM supporta DDR3
2400(OC)
512MB/1GB/2GB/4GB/8GB
DIMM registrati e DIMM ECC non sono
supportati
Velocità di trasferimento dei dati fino a 3.0Gb/s
/ 6.0Gb/s.
SATA 2 & 3 Controller Serial ATA integrato
Compatibile specifiche SATA Versione 2.0/3.0
Supporto RAID 0,1,5,10, SRT
LAN
Supporto
audio HD
USB3.0
Alloggi
Negoziazione automatica 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Capacità Half / Full Duplex
Supporto audio High-Definition (HD)
ALC898
Uscita audio 7.1 canali
Z77
Velocità di trasferimento dati fino a 600 MB / s
Alloggio PCI
x2
Alloggio PCI Express Gen3 x16
x2
Alloggio PCI Express Gen2 x16(x4) x1
Alloggio PCI Express Gen2 x1
x1
Connettore SATA3
x4
Ciascun connettore supporta 1 unità SATA3
Connettore SATA2
x4
Ciascun connettore supporta 1 unità SATA2
Connettori Connettore pannello frontale
x1
Supporta i servizi del pannello frontale
su scheda Connettore audio frontale
x1
Collettore ventolina CPU
52
x1
Supporta la funzione audio pannello frontale
Alimentazione ventolina CPU (con funzione
Smart Fan)
TZ7 7 X E4
SPECIFICA
Collettore ventolina sistema
x2
Collettore cancellaz ione CMOS
x1
Connettore USB2.0
x2
Connettore USB3.0
x1
Alimentazione ventolina di sistema
Ciascun connettore supporta 2 porte USB2.0
pannello frontale
Ciascun connettore supporta 2 porte USB3.0
pannello frontale
Connettore IR del consumatore x1
Porta seriale
x1
Connettore output S/PDIF
x1
Connettore alimentazione
x1
Supporta la funzione d’output audio digitale
(24 pin)
Connettore alimentazione
x1
(8 pin)
I/O
pannello
posteriore
Dimension
i scheda
Tastiera PS/2
x1
Porta HDMI
x1
Porta DP
x1
Porta VGA
x1
Porta DVI
x1
Porta eSATA
x1
Porta LAN
x1
Porta USB2.0
x4
Porta USB3.0
x2
Connettore audio
x6
244 mm (larghezza) x 305 mm
(altezza)
Biostar si riserva il diritto di aggiungere o
Sistemi
operativi
supportati
ATX
Windows XP / Vista / 7
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
53
Motherboard Manual
SPANISH
Especificación
Admite Bit de deshabilitación de ejecución / Intel
Socket 1155
CPU
Procesador Intel Core i7 / i5 / i3 / Pentium /
Celeron
Conjunto de
chips
Súper E/S
SpeedStep® Mejorado / Intel Architecture-64 /
Tecnología Extended Memory 64 / Tecnología de
virtualización / Hyper Threading
Intel Z77
IT8728
Iniciativas de control de entorno,
Le ofrece las funcionalidades heredadas de
Monitor hardware
uso más común Súper E/S.
Controlador/monitor de velocidad de ventilador
Interfaz de cuenta Low Pin
Función "Guardia inteligente" de ITE
Módulo de memoria DDR3 de canal Doble
Ranuras DIMM DDR3 x 4
Memoria
Capacidad máxima de memoria de 32GB
principal
Cada DIMM admite DDR de
Admite DDR3 de 1066 / 1333 / 1600
Admite DDR3 de 1866(OC) / 2133(OC) / 2400(OC)
No admite DIMM registrados o DIMM compatibles
512MB/1GB/2GB/4GB/8GB
con ECC
Tasas de transferencia de hasta 3.0 Gb/s / 6.0 Gb/s.
Compatible con la versión SATA 2.0 / 3.0.
SATA 2 & 3 Controlador ATA Serie Integrado
Admite RAID 0,1,5,10, SRT
Red Local
Soporte de
sonido HD
USB3.0
Ranuras
Conectores
en placa
Negociación de 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Funciones Half / Full dúplex
Soporte de sonido de Alta Definición
ALC898
Salida de sonido de 7.1 canales
Z77
Tasas de transferencia de datos hasta 600 MB / s
Ranura PCI
X2
Ranura PCI Express Gen3 x16
X2
Ranura PCI Express Gen2 x16(x4)
X1
Ranura PCI Express Gen2 x 1
X1
Conector SATA3
X4
Cada conector soporta 1 dispositivos SATA3
Conector SATA2
X4
Cada conector soporta 1 dispositivos SATA2
Conector de panel frontal
X1
Soporta instalaciones en el panel frontal
Conector de sonido frontal
X1
Soporta funciones de sonido en el panel frontal
Cabecera de ventilador de CPU
X1
Fuente de alimentación de ventilador de CPU (con
función Smart Fan)
Cabecera de ventilador de sistema X2
54
Fuente de alimentación de ventilador de sistema
TZ7 7 X E4
Especificación
Cabecera de borrado de CMOS
X1
Conector USB2.0
X2
Cada conector soporta 2 puertos USB2.0 frontales
Conector USB3.0
X1
Cada conector soporta 2 puertos USB3.0 frontales
Conector de IR del consumidor
X1
Puerto serie
X1
Conector de salida S/PDIF
X1
Conector de alimentación
X1
Soporta función de salida de sonido digital
(24 patillas)
Conector de alimentación
X1
(8 patillas)
Panel
trasero de
E/S
Tamaño de
la placa
Teclado PS/2
X1
Puerto HDMI
x1
Puerto DP
X1
Puerto VGA
X1
Puerto DVI
X1
Puerto eSATA
X1
Puerto de red local
X1
Puerto USB2.0
X4
Puerto USB3.0
X2
Conector de sonido
X6
244 mm. (A) X 305 Mm. (H)
Soporte de
sistema
Windows XP / Vista / 7
ATX
Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.
operativo
55
Motherboard Manual
PORTUGUESE
ESPECIFICAÇÕES
Suporta as tecnologias Execute Disable Bit /
Socket 1155
CPU
Processador Intel Core i7 / i5 / i3 / Pentium /
Celeron
Chipset
o Super I/O
/ Extended Memory 64 / Virtualization / Hyper
Threading
Intel Z77
IT8728
Especificaçã
Enhanced Intel SpeedStep® / Intel Arquitecture -64
Iniciativas para controlo do ambiente
Proporciona as funcionalidades mais
utilizadas em termos da especificação Super
I/O.
Monitorização do hardware
Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE
Interface LPC (Low Pin Count).
Módulo de memória DDR3 de canal duplo
Ranhuras DIMM DDR3 x 4
Suporta módulos DDR3 1066 / 1333 / 1600
Memória
Capacidade máxima de memória: 32 GB
Suporta módulos DDR3 1866(OC) / 2133(OC) /
principal
Cada módulo DIMM suporta uma memória
2400(OC)
DDR3 de 512MB/ 1GB/2GB/4GB/8GB
Os módulos DIMM registados e os DIMM ECC não
são suportados
Velocidades de transmissão de dados até 3.0 Gb/s /
6.0 Gb/s.
SATA 2 & 3 Controlador Serial ATA integrado
Compatibilidade com a especificação SATA versão
2.0 / 3.0.
Suporta as funções RAID 0,1,5,10, SRT
LAN
Auto negociação de 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Capacidade semi/full-duplex
Suporte
para áudio
Suporta a especificação High-Definition Audio
ALC898
Saída de áudio de 7.1 canais
de alta
definição
USB3.0
Ranhuras
Z77
Taxas de transferência de dados até 600 MB / s
Ranhura PCI
x2
Ranhura PCI Express Gen3 x16
x2
Ranhura PCI Express Gen2 x16(x4) x1
Ranhura PCI Express Gen2 x 1
x1
Conector SATA3
x4
Cada conector suporta 1 dispositivo SATA3
Conectores Conector SATA2
x4
Cada conector suporta 1 dispositivo SATA2
na placa
56
Conector do painel frontal
x1
Para suporte de várias funções no painel frontal
Conector de áudio frontal
x1
Suporta a função de áudio no painel frontal
TZ7 7 X E4
ESPECIFICAÇÕES
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x2
Conector para limpeza do CMOS
x1
Conector USB2.0
x2
Conector USB3.0
x1
Conector de IR do consumidor
x1
Porta série
x1
Conector de saída S/PDIF
x1
Conector de alimentação
x1
Alimentação da ventoinha da CPU (com a função
Smart Fan)
Alimentação da ventoinha do sistema
Cada conector suporta 2 portas USB2.0 no painel
frontal
Cada conector suporta 2 portas USB3.0 no painel
frontal
Suporta a saída de áudio digital
(24 pinos)
Conector de alimentação
x1
(8 pinos)
Teclado PS/2
x1
Porta HDMI
x1
Porta DP
x1
Entradas/S Porta VGA
x1
aídas no
Porta DVI
x1
painel
Porta eSATA
x1
Porta LAN
x1
Porta USB2.0
x4
traseiro
Tamanho
Porta USB3.0
x2
Tomada de áudio
x6
244 mm (L) X 305 mm (A)
ATX
da placa
Sistemas
operativos
suportados
A Biostar reserva-se o direito de adicionar ou
Windows XP / Vista / 7
remover suporte para qualquer sistema operativo
com ou sem aviso prévio.
57
Motherboard Manual
POLISH
SPEC
Obsługa Execute Disable Bit / Enhanced Intel
Socket 1155
Procesor
Procesor Intel Core i7 / i5 / i3 / Pentium /
Celeron
Chipset
SpeedStep® / Intel Architecture-64 / Extended
Memory 64 Technology / Virtualization Technology /
Hyper Threading
Intel Z77
Gniazda DDR3 DIMM x 4
Moduł pamięci DDR3 z trybem podwójnego kanału
Pamięć
Maks. wielkość pamięci 32GB
Obsługa DDR3 1066 / 1333 / 1600
główna
Każde gniazdo DIMM obsługuje moduły
Obsługa DDR3 1866(OC) / 2133(OC) / 2400(OC)
512MB/1GB/2GB/4GB/8GB DDR3
Brak obsługi Registered DIMM oraz ECC DIMM
IT8728
Funkcje kontroli warunków pracy,
Zapewnia najbardziej powszechne funkcje
Monitor H/W
Super I/O.
Kontroler/Monitor prędkości wentylatora
Interfejs Low Pin Count
Funkcja ITE "Smart Guardian"
Super I/O
Transfer danych do 3.0 Gb/s / 6.0 Gb/s.
SATA 2 & 3 Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 2.0 / 3.0.
Obsługa RAID 0,1,5,10, SRT
10 / 100 / 1000 Mb/s z automatyczną negocjacją
LAN
Realtek RTL 8111E
szybkości
Działanie w trybie połowicznego / pełnego dupleksu
Obsługa
audio HD
USB3.0
Gniazda
Złącza
Obsługa High-Definition Audio
ALC898
7.1 kanałowe wyjście audio
Z77
Cena transferu danych do 600 MB / s
Gniazdo PCI
x2
Gniazdo PCI Express Gen3 x16
x2
Gniazdo PCI Express Gen2 x16(x4) x1
Gniazdo PCI Express Gen2 x 1
x1
Złącze SATA3
x4
Każde złącze obsługuje 1 urządzenie SATA3
Złącze SATA2
x4
Każde złącze obsługuje 1 urządzenie SATA2
Złącze panela przedniego
x1
Obsługa elementów panela przedniego
Przednie złącze audio
x1
Obsługa funkcji audio na panelu przednim
wbudowane Złącze główkowe wentylatora
procesora
Zasilanie wentylatora procesora (z funkcją Smart
x1
Złącze główkowe wentylatora
systemowego
58
x2
Fan)
Zasilanie wentylatora systemowego
TZ7 7 X E4
SPEC
Złącze główkowe kasowania CMOS x1
Złącze USB2.0
x2
Złącze USB3.0
x1
Złącze Konsument IR
x1
Port szeregowy
x1
Złącze wyjścia S/PDIF
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (8 pinowe)
x1
Klawiatura PS/2
x1
Port HDMI
x1
Port DP
x1
Port VGA
x1
Back Panel Port DVI
x1
I/O
Wymiary
płyty
Port eSATA
x1
Port LAN
x1
Port USB2.0
x4
Port USB3.0
x2
Gniazdo audio
x6
244 mm (S) X 305 mm (W)
Każde złącze obsługuje 2 porty USB2.0 na panelu
przednim
Każde złącze obsługuje 2 porty USB3.0 na panelu
przednim
Obsługa funkcji cyfrowego wyjścia audio
ATX
Obsluga
systemu
operacyjne
Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista / 7
odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.
go
59
Motherboard Manual
RUSSIAN
СПЕЦ
CPU
(центральн
ый
Поддержка технологий Execute Disable Bit /
Socket 1155
Процессор Intel Core i7 / i5 / i3 / Pentium /
Celeron
/ Extended Memory 64 Technology / технологии
виртуализация / Hyper Threading
процессор)
Набор
Enhanced Intel SpeedStep® / Intel Architecture-64
Intel Z77
микросхем
Модуль памяти с двухканальным режимом DDR3
Слоты DDR3 DIMM x 4
Основная
Максимальная ёмкость памяти 32 ГБ
память
Каждый модуль DIMM поддерживает
512МБ/1ГБ/2ГБ/4ГБ/8 ГБ DDR3
Super I/O
Поддержка DDR3 1066 / 1333 / 1600
Поддержка DDR3 1866(OC) / 2133(OC) / 2400(OC)
Не поддерживает зарегистрированные модули
DIMM and ECC DIMM
IT8728
Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые
Аппаратный монитор
действующие функциональные
Регулятор скорости вентилятора/ монитор
возможности Super I/O.
Функция ITE "Smart Guardian"
Интерфейс с низким количеством выводов (Интеллектуальная защита)
скорость передачи данных до 3.0 гигабит/с /
SATA 2 & 3
Встроенное последовательное устройство 6.0 гигабит/с.
управления ATA
Соответствие спецификации SATA версия 2.0/3.0
Поддержка RAID 0,1,5,10, SRT
Локальная
Автоматическое согласование 10 / 100 / 1000
Realtek RTL 8111E
Мб/с
сеть
Частичная / полная дуплексная способность
Звуковая
поддержка
Звуковая поддержка High-Definition
ALC898
7.1канальный звуковой выход
жесткого
диска
USB3.0
Слоты
Встроенны
Z77
скорости передачи данных до 600 МБ / с
Слот PCI
x2
Слот PCI Express Gen3 x16
x2
Слот PCI Express Gen2 x16(x4)
x1
Слот PCI Express Gen2 x 1
x1
Разъём SATA3
x4
Каждый разъём поддерживает 1 устройство SATA3
Разъём SATA2
x4
Каждый разъём поддерживает 1 устройство SATA2
Разъём на лицевой панели
x1
Поддержка устройств на лицевой панели
Входной звуковой разъём
x1
й разъём
60
Поддержка звуковых функций на лицевой
панели
TZ7 7 X E4
СПЕЦ
Источник питания для вентилятора центрального
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы
x2
процессора (с функцией интеллектуального
вентилятора)
Источник питания для вентилятора системы
Открытое контактирующее
Задняя
приспособление CMOS
x1
USB2.0-разъём
x2
USB3.0-разъём
x1
Разъём едока ИКЫЙ
x1
Последовательный порт
x1
Разъём вывода для S/PDIF
x1
Разъем питания (24 вывод)
x1
Разъем питания (8 вывод)
x1
Клавиатура PS/2
x1
Порт HDMI
x1
Порт DP
x1
Порт VGA
x1
панель
Порт DVI
x1
средств
eSATA порт
x1
ввода-выв Порт LAN
USB2.0-порт
ода
USB3.0-порт
Каждый разъём поддерживает 2 USB2.0-порта на
лицевой панели
Каждый разъём поддерживает 2 USB3.0-порта на
лицевой панели
Поддержка вывода цифровой звуковой функции
x1
x4
x2
Гнездо для подключения
наушников
Размер
244 мм (Ш) X 305 мм (В)
x6
ATX
панели
Поддержка
OS
Biostar сохраняет за собой право добавлять или
Windows XP / Vista / 7
удалять средства обеспечения для OS с или без
предварительного уведомления.
61
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰیﺔ‬
‫‪Execute Disable Bit / Enhanced Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫‪Socket 1155‬‬
‫‪Intel Core i7 / i5 / i3 / Pentium /‬ﻣﻌﺎﻟﺠﺎت‬
‫ﺑﺘﺮدد یﺼﻞ إﻟﻰ ‪Celeron‬‬
‫‪SpeedStep® / Intel Architecture-64 / Extended‬‬
‫‪Memory 64 Technology / Virtualization Technology /‬‬
‫‪Hyper Threading‬‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ ‪Intel Z77‬‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﺳﻌﺎت ‪DDR3 1600 / 1333 / 1066‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫ﻣﻴﺠﺎ ﺑﺎیﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 32‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫ﻋﺪد‪4‬‬
‫‪ 1866(OC) / 2133‬ﺳ ﻌﺎت ‪ DDR3‬ﻧ ﻮع ﻣﻦ اﻟﺬاآﺮة ﺗ ﺪﻋﻢ ﻣﻴﺠﺎ ﺑﺎیﺖ و‪ /512 /1‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺑﺎی ﺖ ﻣﻴﺠ ﺎ)‪(OC) / 2400(OC‬‬
‫و‪ /2‬و‪ /4‬و‪ 8‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫‪IT8728‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫‪ Super I/O‬اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪ / 6.0‬ﺛﺎﻧﻴ ﺔ‪/‬ﺝﻴﺠﺎﺑ ﺖ ‪ 3.0‬إﻟ ﻰ ﺗﺼ ﻞ ﺑﺴ ﺮﻋﺎت اﻟﺒﻴﺎﻧ‬
‫ﺎت ﻧﻘ ﻞ‬
‫‪.‬ﺛﺎﻧﻴ ﺔ‪/‬ﺝﻴﺠﺎﺑ ﺖ‬
‫‪ SATA 2 & 3‬ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫‪ 2.0 / 3.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪RAID 0,1,5,10, SRT‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ ‪Realtek RTL 8111E‬‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬
‫‪ALC898‬‬
‫‪ 7.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫اﻟﺘﻌﺮیﻒ‬
‫ﺛﺎﻧﻴ ﺔ ‪ /‬ﺑﺎی ﺖ ﻣﻴﻐ ﺎ ‪ 600‬إﻟ ﻰ ﺗﺼ ﻞ ﺑﻴﺎﻧ ﺎت ﻧﻘ ﻞ ﻣﻌﺪﻻت‬
‫‪Z77 USB3.0‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪2‬‬
‫ﻓﺘﺤﺔ‪PCI Express x16 Gen2‬‬
‫ﻋﺪد‪2‬‬
‫ﻓﺘﺤﺔ‪PCI Express (x4)x16 Gen2‬‬
‫ﻋﺪد‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x 1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪SATA3‬‬
‫ﻋﺪد ‪4‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة ‪SATA3‬‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻣﻨﻔﺬ ‪SATA2‬‬
‫ﻋﺪد ‪4‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة ‪SATA2‬‬
‫ﻋﺪد ‪1‬‬
‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫اﻟﻔﺘﺤﺎت‬
‫اﻟﻠﻮﺣﺔ ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫‪62‬‬
‫‪TZ7 7 X E4‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫ﻋﺪد ‪1‬‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ ‪Smart Fan‬‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪2‬‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪2‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB2.0‬ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻨﻔﺬ ‪USB3.0‬‬
‫ﻋﺪد ‪1‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB3.0‬ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻨﻔﺬ اﻷﺣﻤﺮ ﺗﺤ ﺖ ﻣﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد‪1‬‬
‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪8‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻣﻔﺎﺗﻴﺢ ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪HDMI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪DP‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ دﺧﻞ‪/‬ﺧﺮج ﻣﻨﺎﻓﺬ ‪DVI‬‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ ﻣﻨﻔﺬ‪eSATA‬‬
‫ﻋﺪد‪1‬‬
‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪4‬‬
‫ﻣﻨﺎﻓﺬ ‪USB3.0‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪6‬‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ ‪ 305‬ﻣﻢ )ﻋﺮض( ‪ 244 X‬ﻣﻢ )ارﺗﻔﺎع(‬
‫دﻋﻢ أﻧﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪63‬‬
‫یﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬
‫‪Windows XP / Vista / 7‬‬
‫‪ATX‬‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺧﻄﺎر أو ﺑﺪون ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫إﺧﻄﺎر‪.‬‬
Motherboard Manual
JAPANESE
仕様
Execute Disable Bit / Enhanced Intel SpeedStep® /
Socket 1155
CPU
Intel Core i7 / i5 / i3 / Pentium / Celeron プロ
セッサ
Intel Architecture-64 / Extended Memory 64
Technology / Virtualization Technology / Hyper
Threadingをサポートします
チップセット Intel Z77
メインメモリ
Super I/O
DDR3 DIMMスロット x 4
デュアル チャンネルモードDDR3メモリモジュール
最大メモリ容量32GB
DDR3 1066 / 1333 / 1600 をサポート
各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3 DDR3 1866(OC) / 2133(OC) / 2400(OC) をサポート
をサポート
登録済みDIMMとECC DIMMはサポートされません
IT8728
環境コントロールイニシアチブ、
もっとも一般に使用されるレガシーSuper I/O機
H/Wモニター
能を採用しています。
ファン速度コントローラ/ モニター
低ピンカウントインターフェイス
ITEの「スマートガーディアン」機能
最高3.0 Gb/秒 / 6.0 Gb/秒のデータ転送速度
SATAバージョン2.0 / 3.0仕様に準拠。
SATA 2 & 3 統合シリアルATAコントローラ
RAID 0,1,5,10, SRTのサポート
LAN
HDオーディ
10 / 100 / 1000 Mb/秒のオートネゴシエーション
Realtek RTL 8111E
半/全二重機能
ALC898
ハイデフィニションオーディオのサポート
オのサポート
USB3.0
スロット
7.1 チャンネルオーディオアウト
Z77
PCIスロット
x2
PCI Express Gen3 x16スロット
x2
PCI Express Gen2 x16スロット(x4) x1
PCI Express Gen2 x 1スロット
x1
SATA3コネクタ
x4
各コネクタは1つのSATA3デバイスをサポートします
SATA2コネクタ
x4
各コネクタは1つのSATA2デバイスをサポートします
x1
フロントパネル機能をサポートします
フロントオーディオコネクタ
x1
フロントパネルオーディオ機能をサポートします
CPUファンヘッダ
x1
CPUファン電源装置(スマートファン機能を搭載)
システムファンヘッダ
x2
システムファン電源装置
オンボードコ フロントパネルコネクタ
ネクタ
64
データ転送速度最大600 MB /秒の
TZ7 7 X E4
仕様
CMOSクリアヘッダ
x1
USB2.0コネクタ
x2
各コネクタは2つのフロントパネルUSB2.0ポートをサポ
ートします
USB3.0コネクタ
x1
各コネクタは2つのフロントパネルUSB3.0ポートをサポ
ートします
消費者IRコネクタ
x1
シリアルポート
x1
S/PDIFアウトコネクタ
x1
電源コネクタ(24ピン)
x1
電源コネクタ(8ピン)
x1
PS/2キーボード
x1
HDMIポート
x1
DPポート
x1
VGAポート
x1
背面パネル
DVI-Dポート
x1
I/O
eSATAポート
x1
LANポート
x1
USB2.0ポート
x4
USB3.0ポート
x2
オーディオジャック
x6
ボードサイズ 244 mm (幅) X 305 mm (高さ)
OSサポート Windows XP / Vista / 7
デジタルオーディオアウト機能をサポートします
ATX
Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。
2012/05/09
65
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement