4114 Manual

4114 Manual
4114
Universal
transmitter
No. 4114V104-UK
F r o m s e r. n o . 1 2 1 5 2 4 0 0 1
SIGNALS THE BEST
DK
PR electronics A/S tilbyder et bredt program af analoge og digitale
signalbehandlingsmoduler til industriel automation. Programmet
består af Isolatorer, Displays, Ex-barrierer, Temperaturtransmittere,
Universaltransmittere mfl. Vi har modulerne, du kan stole på i selv
barske miljøer med elektrisk støj, vibrationer og temperaturudsving, og alle produkter opfylder de strengeste internationale standarder. Vores motto »Signals the Best« er indbegrebet af denne
filosofi – og din garanti for kvalitet.
UK
PR electronics A/S offers a wide range of analogue and digital
signal conditioning devices for industrial automation. The product
range includes Isolators, Displays, Ex Interfaces, Temperature
Transmitters, and Universal Devices. You can trust our products
in the most extreme environments with electrical noise, vibrations
and temperature fluctuations, and all products comply with the
most exacting international standards. »Signals the Best« is the
epitome of our philosophy – and your guarantee for quality.
FR
PR electronics A/S offre une large gamme de produits pour le
traite­
ment des signaux analogiques et numériques dans tous
les domaines industriels. La gamme de produits s’étend des
transmetteurs de température aux afficheurs, des isolateurs aux
interfaces SI, jusqu’aux modules universels. Vous pouvez compter
sur nos produits même dans les conditions d’utilisation sévères,
p.ex. bruit électrique, vibrations et fluctuations de température.
Tous nos produits sont conformes aux normes internationales les
plus strictes. Notre devise »SIGNALS the BEST« c’est notre ligne
de conduite - et pour vous l’assurance de la meilleure qualité.
DE
PR electronics A/S verfügt über ein breites Produktprogramm
an analogen und digitalen Signalverarbeitungsgeräte für die in­
dustrielle Automatisierung. Dieses Programm umfasst Displays,
Temperaturtransmitter, Ex- und galvanische Signaltrenner, und
Universalgeräte. Sie können unsere Geräte auch unter extremen
Einsatzbedingungen wie elektrisches Rauschen, Erschütterungen
und Temperaturschwingungen vertrauen, und alle Produkte von
PR electronics werden in Überein­stimmung mit den strengsten
internationalen Normen produziert. »Signals the Best« ist Ihre
Garantie für Qualität!
1251
Universal transmitter
4114
contents
Warning...............................................................................
Symbol identification...........................................................
Safety instructions...............................................................
Declaration of conformity....................................................
How to demount system 4000............................................
When front LED lights red / display shows AO.ER.............
Advanced features..............................................................
Application..........................................................................
Technical characteristics.....................................................
PR 4501 display / programming front.................................
Applications.........................................................................
Order codes........................................................................
Electrical specifications.......................................................
Display readout on the 4501 of sensor error detection
and input signal outside range.........................................
Sensor error detection limits............................................
Error indications...............................................................
Connections........................................................................
Block diagram.....................................................................
Configuration / operating the function keys.......................
Routing diagram..................................................................
Routing diagram, Advanced settings (ADV.SET).................
Scrolling help text in display line 3.....................................
2
3
3
5
6
6
7
7
7
8
9
10
10
13
14
14
15
16
17
20
22
23
4114V104-UK1
Warning
GENERAL
This device is designed for connection to hazardous electric
voltages.
Ignoring this warning can result in severe personal injury or
mechanical damage.
To avoid the risk of electric shock and fire, the safety
instructions of this manual must be observed and the guidelines
fol­lowed. The specifications must not be exceeded, and the
device must only be applied as described in the following.
Prior to the commissioning of the device, this manual must be
examined carefully.
Only qualified personnel (technicians) should install this device.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
WARNING
HAZARD­
OUS
VOLTAGE
Until the device is fixed, do not connect hazardous voltages to
the device.
The following operations should only be carried out on a
disconnected device and under ESD safe conditions:
General mounting, connection and disconnection of wires.
Troubleshooting the device.
Repair of the device and replacement of circuit breakers
must be done by PR electronics A/S only.
WARNING
INSTALLATION
SYSTEM 4000 must be mounted on a DIN rail according to DIN
46277.
warning
Do not open the front plate of the module as this will cause
damage to the connector for the display / programming front
PR 4501. This module contains no DIP-switches or jumpers.
24114V104-UK
Symbol identification
Triangle with an exclamation mark: Warning / demand.
Potentially lethal situations.
The CE mark proves the compliance of the device with the essential
requirements of the directives.
The double insulation symbol shows that the device is protected by
double or reinforced insulation.
Safety instructions
Definitions
Hazardous voltages have been defined as the ranges: 75 to 1500 Volt DC, and
50 to 1000 Volt AC.
Technicians are qualified persons educated or trained to mount, operate, and
also troubleshoot technically correct and in accordance with safety regulations.
Operators, being familiar with the contents of this manual, adjust and operate
the knobs or potentiometers during normal operation.
Receipt and unpacking
Unpack the module without damaging it. The packing should always follow the
module until this has been permanently mounted.
Check at the receipt of the module whether the type corresponds to the one
ordered.
Environment
Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock,
as well as rain and heavy moisture. If necessary, heating in excess of the stated
limits for ambient temperatures should be avoided by way of ventilation.
All devices fall under Installation Category II, Pollution Degree 1, and Insulation
Class II.
Mounting
Only technicians who are familiar with the technical terms, warnings, and
instruc­tions in the manual and who are able to follow these should connect the
device.
Should there be any doubt as to the correct handling of the device, please
contact your local distributor or, alternatively,
PR electronics A/S
www.prelectronics.com
4114V104-UK3
Mounting and connection of the device should comply with national legislation
for mounting of electric materials, i.e. wire cross section, protective fuse, and
location. Descriptions of input / output and supply connections are shown in
the block diagram and side label.
The following apply to fixed hazardous voltages-connected devices:
The max. size of the protective fuse is 10 A and, together with a power
switch, it should be easily accessible and close to the device. The power
switch should be marked with a label indicating that it will switch off the
volt­age to the device.
Year of manufacture can be taken from the first two digits in the serial number.
UL installation requirements
Use 60/75°C copper conducters only
For use only in pollution degree 2 or better
Max. ambient temperature......................60°C
Max. wire size..........................................AWG 26-14
UL file number.........................................E231911
Calibration and Adjustment
During calibration and adjustment, the measuring and connection of external
voltages must be carried out according to the specifications of this manual. The
technician must use tools and instruments that are safe to use.
Normal operation
Operators are only allowed to adjust and operate devices that are safely fixed
in panels, etc., thus avoiding the danger of personal injury and damage. This
means there is no electrical shock hazard, and the device is easily accessible.
Cleaning
When disconnected, the device may be cleaned with a cloth moistened with
distilled water.
Liability
To the extent that the instructions in this manual are not strictly observed, the
custom­­er cannot advance a demand against PR electronics A/S that would
otherwise exist according to the concluded sales agreement.
44114V104-UK
Declaration of conformity
As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hereby declares that the following product:
Type: 4114
Name: Universal transmitter
is in conformity with the following directives and standards:
The EMC Directive 2004/108/EC and later amendments
EN 61326-1
For specification of the acceptable EMC performance level, refer to the
electrical specifications for the device.
The Low Voltage Directive 2006/95/EC and later amendments
EN 61010-1
Rønde, 20 August 2009
Kim Rasmussen
Manufacturer’s signature
4114V104-UK5
How to demount system 4000
First, remember to demount the connectors with hazardous voltages.
Picture 1:
Detach the device from the DIN rail
by lifting the bottom lock.
When front LED lights red / display shows AO.ER
PR 4114 is designed as a SIL 2 device with a high safety level. Therefore, a
continuous measurement of the outgoing current is carried out on a 4...20
mA output signal. If the current is 0, an error mode switches on the red front
LED. This function is not a default option but must be actively selected in the
menu. The error mode can only be reset by switching off and then switching
on the supply voltage to the device.
64114V104-UK
Universal TRANSMITTER
PReasy 4114
• Input for RTD, TC, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM-approved for installation in Div. 2
• Output for current and voltage
• Universal AC or DC supply
Advanced features
• Programmable by way of detachable display front (4501), process calibration,
signal simulation, password protection, error diagnostics and help text
available in several languages.
Application
• Linearised, electronic temperature measurement with RTD or TC sensor.
• Conversion of linear resistance variation to a standard analogue current /
voltage signal, i.e. from solenoids and butterfly valves or linear movements
with attached potentio­meter.
• Power supply and signal isolator for 2-wire transmitters.
• Process control with standard analogue output.
• Galvanic separation of analogue signals and measurement of floating signals.
• The 4114 is designed according to strict safety requirements and is thus
suitable for application in SIL 2 installations.
Technical characteristics
• When 4114 is used in combination with the 4501 display / programming front,
all operational parameters can be modified to suit any application. As the
4114 is designed with electronic hardware switches, it is not necessary to
open the device for setting of DIP-switches.
• A green / red front LED indicates normal operation and malfunction.
• Continuous check of vital stored data for safety reasons.
• 3-port 2.3 kVAC galvanic isolation.
4114V104-UK7
PR 4501 display / programming front
Functionality
The simple and easily understandable PReasy menu
structure and the explanatory help texts guide you
effortless­ly and automatically through the configuration
steps, thus making the product very easy to use. Functions
and configuration options are described in the section
”Configuration /
operating the function keys”.
Application
• Communications interface for modification of operational parameters in 4114.
• Can be moved from one 4114 device to another and download the
configuration of the first transmitter to subsequent transmitters.
• Fixed display for readout of process data and status.
Technical characteristics
• LCD display with 4 lines; Line 1 (H=5.57 mm) shows input signal, line 2
(H=3.33 mm) shows units, line 3 (H=3.33 mm) shows analogue output or tag
no. and line 4 shows communication status.
• Programming access can be blocked by assigning a password. The
password is saved in the transmitter in order to ensure a high degree of
protection against unauthorised modifications to the configuration.
Mounting / installation
• Click 4501 onto the front of 4114.
84114V104-UK
Applications
Input signals:
Current
Volt Potentio­
meter RTD and lin. R
age
Connect., wires
TC
44
+
+
43
*
-
-
42
+
41
Order separately: 5910 CJC connector.
See the connection drawing on page 15.
Output signals:
Analogue, 0/4...20 mA and voltage
12
14
13
11
+
-
+
10 V
10 V
-
1V
1V
+
+
-
-
Supply:
33
21.6...253 VAC
or
19.2...300 VDC
32
31
4114V104-UK9
Order codes
4114 = Universal transmitter
4501 = Display / programming front
5910 = CJC connector
Electrical specifications
Specifications range..................................... -20°C to +60°C
Common specifications:
Supply voltage, universal............................. 21.6...253 VAC, 50...60 Hz or
19.2...300 VDC
Max. consumption....................................... ≤ 2.0 W
Fuse.............................................................. 400 mA SB / 250 VAC
Isolation voltage, test / operation................ 2.3 kVAC / 250 VAC
Communications interface........................... Programming front 4501
Signal / noise ratio....................................... Min. 60 dB (0...100 kHz)
Response time (0...90%, 100...10%):
Temperature input..................................... ≤ 1 s
mA / V input.............................................. ≤ 400 ms
Calibration temperature............................... 20...28°C
Accuracy, the greater of the general and basic values:
Input
type
All
General values
Absolute
Temperature
accuracy
coefficient
≤ ±0.1% of span
≤ ±0.01% of span / °C
104114V104-UK
Basic values
Basic
accuracy
≤ ±4 µA
≤ ±20 µV
≤ ±0.2°C
≤ ±0.1 Ω
≤ ±0.1 Ω
Input
type
mA
Volt
Pt100
Linear resistance
Potentiometer
TC type:
E, J, K, L, N, T, U
TC type: R, S, W3,
W5, LR
TC type: B
160...400°C
TC type: B
400...1820°C
Temperature
coefficient
≤ ±0.4 µA / °C
≤ ±2 µV / °C
≤ ±0.01°C / °C
≤ ±0.01 Ω / °C
≤ ±0.01 Ω / °C
≤ ±1°C
≤ ±0.05°C / °C
≤ ±2°C
≤ ±0.2°C / °C
≤ ±4.5°C
≤ ±0.45°C / °C
≤ ±2°C
≤ ±0.2°C / °C
EMC immunity influence...................................... < ±0.5% of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst........................ < ±1% of span
Auxiliary supplies:
2-wire supply (terminal 44...43).................... 25...16 VDC / 0...20 mA
Max. wire size............................................... 1 x 2.5 mm2 stranded wire
Screw terminal torque.................................. 0.5 Nm
Relative humidity.......................................... < 95% RH (non-cond.)
Dimensions, wo/w 4501 (HxBxD).................. 109 x 23.5 x 104 / 116 mm
Protection degree......................................... IP20
Weight.......................................................... 145 g / 160 g with 4501
RTD, linear resistance and potentiometer input:
Input
type
Min.
value
Max.
value
Standard
Pt10...Pt1000
Ni50...Ni1000
Cu10...Cu100
Lin. R
Potentiometer
-200°C
-60°C
-200°C
0Ω
10 Ω
+850°C
+250°C
+260°C
10000 Ω
100 kΩ
IEC 60751
DIN 43760
α = 0,00427
-
Input for RTD types:
Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500, Pt1000
Ni50, Ni100, Ni120, Ni1000, Cu10, Cu20, Cu50, Cu100
4114V104-UK11
Cable resistance per wire (max.), RTD.........
Sensor current, RTD.....................................
Effect of sensor cable resistance
(3- / 4-wire), RTD..........................................
Sensor error detection, RTD........................
Short circuit detection, RTD.........................
TC input:
50 Ω
Nom. 0.2 mA
< 0.002 Ω / Ω
Yes
< 15 Ω
Type
Min.
value
Max.
value
Standard
B
E
J
K
L
N
R
S
T
U
W3
W5
LR
0°C
-100°C
-100°C
-180°C
-200°C
-180°C
-50°C
-50°C
-200°C
-200°C
0°C
0°C
-200°C
+1820°C
+1000°C
+1200°C
+1372°C
+900°C
+1300°C
+1760°C
+1760°C
+400°C
+600°C
+2300°C
+2300°C
+800°C
IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1
DIN 43710
IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1
DIN 43710
ASTM E988-90
ASTM E988-90
GOST 3044-84
Cold junction compensation (CJC)
via external sensor in connector 5910..... 20...28°C ≤ ±1°C
-20...20°C /
28...70°C ≤±2°C
via internal CJC sensor............................ ±(2.0°C + 0.4°C * Δt)
Δt = internal temperature - ambient temperature
Sensor error detection, all TC types............ Yes
Sensor error current:
when detecting......................................... Nom. 2 μA
else........................................................... 0 μA
Current input:
Measurement range..................................... 0...20 mA
Programmable measurement ranges........... 0...20 and 4...20 mA
Input resistance............................................ Nom. 20 Ω + PTC 50 Ω
Sensor error detection:
Loop break 4...20 mA............................... Yes
Voltage input:
Measurement range..................................... 0...12 VDC
Programmable measurement ranges........... 0...1 / 0.2...1 / 0...5 / 1...5 /
0...10 and 2...10 VDC
Input resistance............................................ Nom. 10 MΩ
124114V104-UK
Current output:
Signal range (span).......................................
Programmable signal ranges.......................
Load (max.)...................................................
Load stability................................................
Sensor error detection.................................
NAMUR NE 43 Upscale / Downscale..........
Output limitation:
on 4...20 and 20...4 mA signals................
on 0...20 and 20...0 mA signals................
Current limit..................................................
Voltage output:
Signal range.................................................
Programmable signal ranges.......................
0...20 mA
0...20 / 4...20 / 20...0 / 20...4 mA
20 mA / 800 Ω / 16 VDC
≤ 0.01% of span / 100 Ω
0 / 3.5 / 23 mA / none
23 mA / 3.5 mA
3.8...20.5 mA
0...20.5 mA
≤ 28 mA
0...10 VDC
0...1 / 0.2...1 / 0...10 / 0...5 / 1...5 /
2...10 / 1...0 / 1...0.2 / 5...0 / 5...1 /
10...0 and 10...2 V
Load (min.).................................................... 500 kΩ
Ex / I.S. approval:
FM, applicable in.......................................... Class I, Div. 2, Group A, B, C, D
Class I, Div. 2, Group IIC
Zone 2
Max. ambient temperature for T5................ 60°C
Marine approval:
Det Norske Veritas, Ships & Offshore.......... Standard for Certification No. 2.4
GOST R approval:
VNIIM, Cert. no............................................. See www.prelectronics.com
Observed authority requirements:
Standard:
EMC 2004/108/EC....................................... EN 61326-1
LVD 2006/95/EC........................................... EN 61010-1
FM................................................................ 3600, 3611, 3810 and ISA 82.02.01
UL, Standard for Safety............................... UL 508
of span = of the currently selected measurement range
Display readout on the 4501 of sensor error detection
and input signal outside range
Sensor error check:
Device:
4114
Configuration
OUT.ERR=NONE.
Else:
Sensor error detection:
OFF
ON
4114V104-UK13
Input
VOLT
CURR
LIN.R
POTM
TEMP
Outside range readout (IN.LO, IN.HI):
If the valid range of the A/D converter or the polynomial is exceeded
Range
Readout
Limit
IN.LO
< -25 mV
0...1 V / 0.2...1 V
IN.HI
> 1.2 V
IN.LO
< -25 mV
0...10 V / 2...10 V
IN.HI
> 12 V
IN.LO
< -1.05 mA
0...20 mA / 4...20 mA
IN.HI
> 25.05 mA
IN.LO
<0Ω
0...800 Ω
IN.HI
> 1075 Ω
IN.LO
<0Ω
0...10 kΩ
IN.HI
< 110 kΩ
IN.LO
< -0.5 %
IN.HI
> 100.5 %
IN.LO
< temperature range -2°C
TC / RTD
IN.HI
> temperature range +2°C
Display readout below min.- / above max. (-1999, 9999):
Input
Range
All
All
Readout
-1999
9999
Limit
Display readout <-1999
Display readout >9999
Sensor error detection limits
Sensor error detection (SE.BR, SE.SH):
Input
CURR
POTM
Range
Loop break (4..20 mA)
All, SE.BR on all 3-wire
0...800 Ω
0...10 kΩ
TC
LIN.R
TEMP
RTD, 2-, 3-, and 4-wire
No SE.SH for Cuxx, Pt10, Pt20 and Pt50
Readout
SE.BR
SE.BR
SE.BR
SE.BR
SE.BR
SE.BR
SE.SH
Limit
<= 3.6 mA; > = 21 mA
> ca. 126 kΩ
> ca. 875 Ω
> ca. 11 kΩ
> ca. 750 kΩ / (1.25 V)
> ca. 15 kΩ
< ca. 15 Ω
Error indications
Readout at hardware error
Error search
Test of internal CJC sensor
Readout
CJ.ER
Checksum test of the configuration in FLASH
FL.ER
Check measurement of analogue output current
AO.ER
Communications test 4501 / 4114
Check that input signal matches input configuration
Check that saved configuration in 4501 matches device
NO.CO
IN.ER
TY.ER
Error cause
CJC sensor defect or temperature outside range
Error in FLASH
1) No load on the current output (only S4...20/S20...4 mA)
Connection error
1) Error levels on input
Configuration is not 4114
! Error indications in the display flash once per second. The help text explains the error.
1) The error is reset by switching off and then switching on the supply voltage to the device.
144114V104-UK
Connections
Supply:
31
32
33
Inputs
RTD, 2-wire
RTD, 3- / 4-wire
TC, internal
CJC sensor
Resistance, 2-wire
41 42 43 44
41 42 43 44
41 42 43 44
41 42 43 44
+
-
Resistance,
3- / 4-wire
Potentiometer
2-wire transmitter
Current
41 42 43 44
41 42 43 44
41 42 43 44
41 42 43 44
-
Voltage
*TC, external
CJC connector
41 42 43 44
41 42 CJC 44
+
+
+
-
+
* Order separately: CJC connector 5910
-
-
Tx
Outputs
Current
Voltage, 1 V
Voltage, 10 V
11 12 13 14
11 12 13 14
11 12 13 14
-
mA
+
-
V
+
-
V
+
4114V104-UK15
Block diagram
+
2-wire transmitter
+
-
3
2
RTD and lin. R,
connection,
wires
4
50.0
Potentiometer
l / min
VALVE 5
TC
*
+
PTC
0.2 mA
MUX
Green
A/D
EEPROM
CPU
Order separately: CJC connector 5910
44
43
CJC
42
41
10 W
4114
Red
D/A
500 W
50 W
Supply
Supply
33
31
I+
mA
V
21.6...253 VAC or
19.2...300 VDC
12
10 V
mA
14
1V
V
I+V
I
V
Out. Out. Out.
Gnd.
13
11
164114V104-UK
Current
Voltage
Safety
Configuration /
operating the function keys
Documentation for routing diagram.
In general:
When configuring the 4114, you will be guided through all parameters and you
can choose the settings which fit the application. For each menu there is a
scrolling help text which is automatically shown in line 3 on the display.
Configuration is carried out by using the 3 function keys:
1 will increase the numerical value or choose the next parameter
2will decrease the numerical value or choose the previous parameter
3will accept the chosen value and proceed to the next menu
When configuration is completed, the dispaly will return to the default state 1.0.
Pressing and holding 3 will return to the previous menu or return to the default
state (1.0) without saving the changed values or parameters.
If no key is activated for 1 minute, the display will return to the default state
(1.0) without saving the changed values or parameters.
Further explanations:
Password protection: Programming access can be blocked by assigning a
password. The password is saved in the transmitter in order to ensure a high
degree of protection against unauthorised modifications to the configuration.
Default password 2008 allows acces to all configuration menus.
Signal and sensor error info via display front 4501
Sensor error (see limits in the table) is displayed as SE.BR (sensor break) or
SE.SH (sensor short). Signals outside the selected range (not sensor error,
see table for limits) are displayed as IN.LO indicating low input signal or
IN.HI indicating high input signal. The error indication is displayed in line 3
as text and at the same time the backlight flashes. Line 4 of the display is a
status line which displays COM (flashing bullet) indicating correct functioning
of 4501, and arrow up/down which indicates tendency readout of the input
signal.
4114V104-UK17
Signal and sensor error indication without display front
Status of the unit can also be read from the red/green LED in the front of the device.
Green flashing LED 13 Hz indicates normal operation.
Green flashing LED 1 Hz indicates sensor error.
Steady green LED indicates internal error.
Steady red LED indicates fatal error.
Advanced functions
The unit gives access to a number of advanced functions which can be reached
by answering “Yes” to the point “adv.set”.
Display setup: Here you can adjust the brightness contrast and the backlight.
Setup of TAG number with 6 alphanumerics. Selection of functional readout
in line 3 of the display - choose between readout of analogue output or TAG
number.
Two-point process calibration: The unit can be process-calibrated in 2 points
to fit a given input signal. A low input signal (not necessarily 0%) is applied
and the actual value is entered via 4501. Then a high signal (not necessarily
100%) is applied and the actual value is entered via 4501. If you accept to
use the calibration, the unit will work according to this new adjustment. If you
later reject this menu point or choose another type of input signal the unit will
return to factory calibration.
Process simulation function: If you say ”yes” to the point “EN.SIM” it is
possible to simulate an input signal by means of the arrow keys and thus
control the output signal up or down. When you finalise the point with 3, the
unit returns to normal mode.
Password: Here you can choose a password between 0000 and 9999 in order
to protect the unit against unauthorised modifications to the configuration.
The unit is delivered default without password. If you have locked the unit
with a password by mistake, you can always open the menu by using the
master password 2008.
Language: In the menu ”lang.setup” you can choose between 7 different
language versions of help texts that will appear in the menu. You can choose
between UK, DE, FR, IT, ES, SE and DK.
184114V104-UK
Auto diagnosis
The unit performs an advanced auto diagnosis of the internal circuits.
The following possible errors can by display in the front unit 4501.
CJ.ER - CJC sensor defect or CJC temperature outside range
FL.ER - Flash error
AO.ER - No load on the current output (only for S4...20 mA/S20...4 mA)
NO.CO- Connection error
IN.ER - Error levels on input
TY.ER - Configuration in 4501 does not match this product type
Selection of units
After choosing the input signal type you can choose the process units which
will be displayed in text line 2 (see table). By selection of temperature input
the process value is always displayed in Celsius or Fahrenheit. This is
selected in the menu point after selection of temperature input.
Safety readback
When the device is delivered with default configuration, the SIL function is
disabled. The safety readback function (loop surveillance) can be selected in
the menu O.RANGE, thus enabling the device to run in SIL mode. In order
to enable the SIL functionality, the menu item S4...20 mA must be selected.
Please note, however, that when safety readback is enabled, a sensor error
will be indicated as an error on the analogue output signal.
CJC
In the CJC menu you can choose between external CJC connector and internal
cold junction compensation. The external CJC connector (PR 5910) must be
ordered separately.
Memory
In the memory menu you can save the configuration of the device in the 4501,
and then move the 4501 onto another device of the same type and download
the configuration in the new device.
4114V104-UK19
Routing diagram
Power up
50.0 3
If no key is activated for 1 minute, the display will return to the default
state 1.0 without saving configuration changes.
1 Increase value / choose next parameter
2 Decrease value / choose previous parameter
3 Accept the chosen value and proceed to the next menu
Hold 3 Back to previous menu / return to menu 1.0 without saving
%
12.0
VOLT
CURR
LIN.R
POTM
TEMP
12
1.0
0000
9999
12
0000 3
PASSW.
Txt 1
NO
YES
12
2-10
0-10
1-5
0-5
0.2-1
0-1
12
@C
mA
rpm
1111
111.1
11.11
1.111
12
(69 units)
12
999.9
-199.9
12
3 VOLT 3 2-10 3 UNIT 3 111.1 3 0.0
NO
ADV.SET
Txt 2
IN TYPE
Txt 3
1.1
CURR 3
IN TYPE
Txt 3
1.0 = Default state
Line 1 shows input
signal.
Line 2 shows
UNIT.
By pressing 1 and
2 simultaneously
line 3 alternates
between A.Out
and TAG.
Line 4 shows com
munication status.
1.1 = Only if passwordprotected.
1.2 = Not valid for these
input signals:
0...20 mA and
voltage.
1.3 = Only if input signal
is temperaure.
V.RANGE
Txt 4
%
Txt 11
DEC.P
Txt 12
0...9999
12
0...9999
12
DISP.LO
Txt 13
0-20 4-20
12
4-20 3
I.RANGE
Txt 5
POTM 3
IN TYPE
Txt 3
2W 3W W
12
LIN.R 3
IN TYPE
Txt 3
3W
3
CONNEC.
Txt 6
TEMP 3
IN TYPE
Txt 3
Continued on the page
Routing diagram ADV.SET
YES 3
ADV.SET
Txt 2
204114V104-UK
0
3 2500 3
R 0%
Txt 7
R 100%
Txt 8
Cu Pt Ni TC
12
10...100
12
Cu
SENSOR
Txt 10
3
10
2W 3W W
12
3
3W
Cu TYPE
Txt 69
CONNEC.
Txt 6
10...1000
12
2W 3W W
12
Pt
3 100 3
3W
SENSOR
Txt 10
Pt TYPE
Txt 16
CONNEC.
Txt 6
50...1000
12
2W 3W W
12
Ni
3 100 3
3W
SENSOR
Txt 10
Ni TYPE
Txt 17
CONNEC.
Txt 6
TC.B TC.E TC.J TC.K TC.L
TC.N TC.R TC.S TC.T TC.U
TC.W3 TC.W5 TC.Lr
12
TC
SENSOR
Txt 10
3 TC.K 3 INT
TC.TYPE
Txt 18
CJC
Txt 63
999.9
-199.9
12
S20-4
20-4
20-0
S4-20
4-20
0-20
12
VOLT
CURR
12
23mA
0/3.5mA
NONE
12
4172
-328
12
4172
-328
12
3 100.0 3 CURR 3 4-20 3 23mA 3 0.0 3 150.0 3
DISP.HI
Txt 14
ANA.OUT
Txt 36
O.RANGE
Txt 37
OUT.ERR
Txt 38
10-2
10-0
5-1
5-0
1-0.2
1-0
2-10
0-10
1-5
0-5
0.2-1
0-1
12
OUT.LO
Txt 41
OUT.HI
Txt 42
1.3
1.2
1.3
To default state 1.0
Volt 3 0-10 3
ANA.OUT
Txt 36
O.RANGE
Txt 39
3
3
Selectable UNITS:
@C
3
3
UNIT
Txt 9
3
@C
@F
%
A
bar
cm
ft
ft/h
ft/min
ft/s
g
gal/h
gal/min
GW
hp
hPa
Hz
in
in/h
in/min
in/s
ips
K
kA
kg
kJ
kPa
kV
kW
kWh
l
l/h
l/min
l/s
m
m/h
m/min
m/s
m/s2
m3
m3/h
m3/min
mA
mbar
mils
min
mm
mm/s
mol
MPa
mV
MW
MWh
N
Ohm
Pa
pH
rpm
s
S
t
t/h
uA
um
uS
V
W
Wh
yd
[blank]
4114V104-UK21
Routing diagram,
Advanced settings (ADV.SET)
MEM
DISP
CAL
SIM
PASS
LANG
12
2.0 In the submenu simulation (SIM) you must
press 3 to return to the default state 1.0.
SAVE
LOAD
12
MEM 3 SAVE 3
SETUP
Txt 43
MEMORY
Txt 44
9
0
12
DISP 3
SETUP
Txt 43
3
9
0
12
3
9
3
TAG
A.OUT
12
3 A.OUT 3
CONTRA
Txt 45
LIGHT
Txt 46
VALVE 5
Txt 47
LINE 3
Txt 48
YES
NO
12
100.0
0.0
12
YES
NO
12
100.0
0.0
12
CAL 3 YES 3
SETUP
Txt 43
9
A
12
2.0 3 YES 3 90.0 3 YES 3
CAL.LO
Txt 49
%
Txt 61
NO
YES
NO
12
CAL.HI
Txt 50
%
Txt 62
100.0
0.0
12
EN.SIM
Txt 51
2.0
%
Txt 52
NO
YES
NO
12
9999
0000
12
PASS 3 YES 3 0000 3
SETUP
Txt 43
EN.PASS
Txt 54
NEW.PAS
Txt 55
NO
DE, DK,
ES, FR,
IT, SE,
UK
12
LANG 3
SETUP
Txt 43
UK
USE.CAL
Txt 60
NO
SIM 3 YES 3 25.0 3
SETUP
Txt 43
YES
NO
12
3
LANGUA
Txt 59
224114V104-UK
To default state 1.0
Scrolling help text in display line 3
[01] Set correct password
[02] Enter advanced setup menu?
[03] Select temperature input
Select potentiometer input
Select linear resistance input
Select current input
Select voltage input
[04] Select 0.0-1 V input range
Select 0.2-1 V input range
Select 0-5 V input range
Select 1-5 V input range
Select 0-10 V input range
Select 2-10 V input range
[05] Select 0-20 mA input range
Select 4-20 mA input range
[06] Select 2-wire sensor connection
Select 3-wire sensor connection
Select 4-wire sensor connection
[07] Set resistance value low
[08] Set resistance value high
[09] Select Celsius as temperature unit
Select Fahrenheit as temperature unit
[10] Select TC sensor type
Select Ni sensor type
Select Pt sensor type
Select Cu sensor type
[11] Select display unit
[12] Select decimal point position
[13] Set display range low
[14] Set display range high
[16] Select Pt10 as sensor type
Select Pt20 as sensor type
Select Pt50 as sensor type
Select Pt100 as sensor type
Select Pt200 as sensor type
Select Pt250 as sensor type
Select Pt300 as sensor type
Select Pt400 as sensor type
Select Pt500 as sensor type
Select Pt1000 as sensor type
[17] Select Ni50 as sensor type
Select Ni100 as sensor type
Select Ni120 as sensor type
Select Ni1000 as sensor type
[69] Select Cu10 as sensor type
Select Cu20 as sensor type
Select Cu50 as sensor type
Select Cu100 as sensor type
[18] Select TC-B as sensor type
Select TC-E as sensor type
Select TC-J as sensor type
Select TC-K as sensor type
Select TC-L as sensor type
Select TC-N as sensor type
Select TC-R as sensor type
Select TC-S as sensor type
Select TC-T as sensor type
Select TC-U as sensor type
Select TC-W3 as sensor type
Select TC-W5 as sensor type
Select TC-Lr as sensor type
[36] Select current as analogue output type
Select voltage as analogue output type
[37 Select 0-20 mA output range
Select 4-20 mA output range
Select S4-20 mA with safety readback
Select 20-0 mA output range
Select 20-4 mA output range
Select S20-4 mA with safety readback
[38] Select no error action - output undefined at error
Select downscale at error
Select NAMUR NE43 downscale at error
Select NAMUR NE43 upscale at error
[39] Select 0.0-1 V output range
Select 0.2-1 V output range
Select 0-5 V output range
Select 1-5 V output range
Select 0-10 V output range
Select 2-10 V output range
Select 1-0.0 V output range
Select 1-0.2 V output range
Select 5-0 V output range
Select 5-1 V output range
Select 10-0 V output range
Select 10-2 V output range
[41] Set temperature for analogue output low
[42] Set temperature for analogue output high
[43] Enter password setup
Enter simulation mode
Perform process calibration
Enter display setup
Perform memory operations
[44] Load saved configuration into 4114
Save 4114 configuration in 4501
[45] Adjust LCD contrast
[46] Adjust LCD backlight
[47] Write a 6-character device TAG
[48] Analogue output value is shown in display line 3
Device TAG is shown in display line 3
[49] Calibrate input low to process value?
[50] Calibrate input high to process value?
[51] Enable simulation mode?
[52] Set the input simulation value
[54] Enable password protection?
[55] Set new password
[59] Select language
[60] Use process calibration values?
[61] Set value for low calibration point
[62] Set value for high calibration point
[63] Select CJC connector (accessory)
Select internal temperature sensor
4114V104-UK23
Displays
Programmable displays with a wide
selection of inputs and outputs for display of temperature,
volume and weight, etc. Feature linearisation, scaling,
and difference measurement functions for programming
via PReset software.
Ex interfaces Interfaces for analogue and digital signals
as well as HART® signals between sensors / I/P converters /
frequency signals and control systems in Ex zone 0, 1 & 2
and for some devices in zone 20, 21 & 22.
Galvanic isolators for analogue and
Isolation
digital signals as well as HART® signals. A wide product
range with both loop-powered and universal isolators
featuring linearisation, inversion, and scaling of output
signals.
Temperature A wide selection of transmitters for DIN
form B mounting and DIN rail devices with analogue
and digital bus communication ranging from applicationspecific to universal transmitters.
Universal
PC or front programmable devices with
universal options for input, output and supply. This range
offers a number of advanced features such as process
calibration, linearisation and auto-diagnosis.
www.prelectronics.fr
[email protected]
www.prelectronics.de
[email protected]
www.prelectronics.es
[email protected]
www.prelectronics.it
[email protected]
www.prelectronics.se
[email protected]
www.prelectronics.co.uk
[email protected]
www.prelectronics.com
[email protected]
www.prelectronics.cn
[email protected]
Head office
Denmarkwww.prelectronics.com
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
[email protected]
tel. +45 86 37 26 77
fax +45 86 37 30 85
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement