Operating Instructions
DVD VCD CD JPG
Operating
Instructions
7`` TWINS PORTABLE TABLET DVD PLAYER
Content
1
2
3
4
01
04
PRECAUTIONS........................
CAUTIONS ON USING THIS PLAYER
7
PORTABLE DVD ACCESSORIES............06
SPECIFICATION........................07
TYPES OF DISCS PLAYABLE ON THIS
PLAYER................................07
5
09
FRONT OF THE PLAYER...........
09
KEYPAD IN THE PLAYER...................... 09
FRONT OF THE MONITOR..........
KEYPAD IN THE MONITOR.....................
BACK OF THE PLAYER............
RIGHT SIDE OF THE PLAYER......
LEFT SIDE OF THE PLAYER.......
TOP OF THE PLAYER............
BACK OF THE MONITOR...........
LEFT SIDE OF THE MONITOR......
6
19
RECHARGING THE BATTERY BY USING
AC-DC ADAPTER.............................
CAUTIONS WHEN CHARGING THE BATTERY............. 20
PORTABLE DVD SPECIFICATIONS................
07
08
MONITOR ACCESSORIES AND SPECIFICATIONS.....
PARTS NAME AND FUNCTION.............
10
10
11
12
12
13
13
14
REMOTE CONTROL UNIT.......................
USING REMOTE CONTROL UNIT...........
PRECAUTIONS BEFORE USING REMOTE
CONTROL UNIT.........................
RANGE................................
INSTALL BATTERY FOR REMOTE
CONTROL UNIT..........................
USING THE BATTERY.......................18
PRECAUTIONS BEFORE USING
THE BATTERY................................18
BATTERY STORAGE................................ 18
BATTERY LIFE...................................
18
USING THE BATTERY..............................
INSTALLING AND REMOVING THE BATTERY............ 18
16
20
8
CONNECTING THE PLAYER TO OTHER
COMPONENTS...........................21
CONNECTING TO AC-DC ADAPTER.................... 21
CONNECTING EARPHONE............................ 21
CONNECTING TO USB STORAGE......................
22
22
CONNECTING TO MEMORY CARD......................
CONNECTING
CONNECTING
CONNECTING
CONNECTING
TO
TO
TO
TO
A TV SET.........................
23
AN AMPLIFIER.....................
AN ACTIVE SPEAKER SYSTEM......... 24
25
AN AUDIO/VIDEO PLAYER
SYSTEM IF YOU WANT THE UNIT AS A MONITOR.......
CONNECT TO A MONITOR...........................
16
16
17
27
26
Content
9
BASIC OPERATIONS......................
28
10
TURNING ON/OFF THE MAIN UNIT.............. 28
SELECTING A TV SYSTEM..........................37
SETTING SCREEN SAVER............................
37
SELECTING A TV SCALE...........................
38
SETTING PARENT LOCK............................
SETTING PARENT LOCK LEVEL......................38
DEFAULT SETTING................................39
PLACING DISC............................ 29
PLAYING DISCS..............................29
REMOVING DISCS.............................29
MODE SETTINGS (BRIGHTNESS/CONTRAST/
COLOR/TFT DISPLAY MODE/TFT REVERSE
MODE/AV OUT/IN MODE)....................
STOPPING THE PLAYING.......................30
PAUSING THE DISC...........................31
SCANNING FORWARD AND BACKWARD..............31
REPEAT PLAYING THE DISC....................
31
ZOOM PLAYING...............................
PROGRAM PLAYING............................32
32
USING OSD..................................34
SELECTING A SUB-TITLE......................34
33
SELECTING AN AUDIO.........................34
SELECTING AN ANGLE.........................34
PLAYING AUDIO FILES AND JPEG DISC..........35
PLAYING THE FILE STORING IN A USB
36
STORAGE....................................
PLAYING THE FILE STORING IN A
36
MEMORYCARD.................................
MAIN UNIT SETTINGS......................37
SELECTING A OSD LANGUAGE.......................39
SELECTING AN AUDIO LANGUAGE....................40
SELECTING A SUBTITLE LANGUAGE..................40
40
SELECT A MENU LANGUAGE.........................40
11
TROUBLE SHOOTING....................... 41
Precautions
1
Thank you for purchasing Portable DVD player. Please read this manual carefully before operating and
reserve it for future reference. It will be helpful to you if you encounter any operational problem.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
ATTENTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
LASER:
This Digital Video Disc player employs a Laser System.To ensure proper use of this
product, please read this owner s manual carefully and retain for future reference.
Should the unit require maintenance, contact an authorized service location - see
service procedure.
Use of controls, adjustments or the performance of procedures other than those
specified may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM
LASER
Type
Wave length
Output Power
Beam divergence
Semiconductor laser GaAIAs
650 nm/780nm
5mW
60degree
01
CLASS 1
LASER PRODUCT
Precautions
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of proceduresthose specified may result in hazardous
radiation exposure.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, with in an equilateraltriangle, is intended to
alert user to the presence of uninsulated“dangerous voltage” within the product enclosure
that may beof sufficient magnitude to constitute a risk of electric shock to persons.
!
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of imporant operating andmaintenance (servicing) instruction in the literature
accompanying the applianc
CAUTION:
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO LASER BEAM.
02
1
Precautions
03
1
Cautions o n U sing t his P layer
Do not move the player during playback
During playback, the disc spins at high
speed, so do not lift or move the player.
Doing so may damage the disc.
Transporting the player
When transporting the player be sure to remove
the disc and turn off the power, then unplug
the power cord .
Place of installation
Select a stable place near the TV or stereo system
to which you are going to connect the player.
Do not place the player on top of a TV or color
monitor. Install the player away from cassette
decks or other devices which are easily affected
by magnetic forces.
Special note regarding use of
player in vehicles
Unit must not be used when the vehicle is
moving at all.
Most countries and states have laws which
prohibit or severely restrict the use of the
player in vehicles while driving.
Do not leave the player or the battery pack in
places where the temperature is extremely
low (about-10℃ or lower) or extremely high
(about 60℃ or higher), such as inside the
passenger cabin or trunk in midsummer.
Doing so may warp the outer case or reduce
the performance or quality
of the battery pack.
When carrying on planes
Do not place objects on top of the player
Do not place any objects on top of the player.
Heed the airline company's rules.
Turn off the power when not using the player
If the player is connected to your TV but not in
use then switch the power off this will prevent
interference with your normal TV picture.
Noise problems may also be experienced if used
near a radio.
04
When carrying in hospitals
Heed the hospital's rules
2
Cautions o n U sing this Player
When using with car power cable in cars
Please turn on the engine and then connect with the car power cable for using.
Cleaning the player
Normally clean the player using a soft, dry cloth. For tough dirt, apply some neutral detergent
diluted in 5 to 6 parts water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe
the player with a dry cloth. Note that alcohol, thinner, benzene, insecticides, etc., may cause
the print or coating to peel off. Also avoid leaving rubber or plastic products in contact with
the player for long periods of time, as this may damage the cabinet. When using chemically treated
cloths, read the cloth's instructions carefully. Always unplug the power cord from the power
outlet before cleaning the player.
To clean dirt off the liquid crystal display, wipe the display gently with a soft, dry cloth
(such as an eyeglass cleaning cloth). Note that leaving water droplets on the display for long
periods of time may result in discoloration or stains. For tough dirt,
use a commercially available liquid crystal display cleaner.
Copyrights
Unauthorized duplication, broadcast, public performance or rental of discs is
prohibited by law.
05
2
Portable DVD Accessories
After unpacking, check that all the accessories listed below are included.
AC/DC adapter
A V Cable
Car power cable
Operating instructions
RAT
AC&DC Cable
06
ION
INS
Card-type remote control unit
OK
OPE
3
Ear phone
TRU
CTI
ONS
Portable DVD Specifications
The discs listed on the below
can be played on this player
without any adapter
Specifications
Disc type
DVDs
JPG
8cm/12cm;
Vedio CDs 8cm/12cm;
Audio output
Audio CDs 8cm/12cm;
Video output
JPG CDs
CD-DA
JPEG
DVD Video
Video CD
8cm/12cm.
LCD panel
Power
Noted:
Don't using the disc that is
scratched seriously
Unit size
Weight
Working
temperature
07
LINE OUT(20Hz-20kHz)
Earphone output
Video output
Video output: 1.0Vpp/75ohm
7``color TFT
AC-DC adapter 12V/1.2A
Rechargeable AA 1.2V batter y
220mmX150mmX34.5mm
665g
5 C~45 C
4
Monitor a cce ssories a nd s pecifications
After unpacking, check that all the accessories listed below are included.
AC&DC Cable(optional)
Operating instructions (this manual)
OPE
RAT
ION
INS
TRU
CTI
Ear phone (optional)
4
ONS
Specifications
Audio input
1Vrms 2Vrms
LCD panel
Video input
1.0Vpp/75ohm
Unit size
Power
DC 12V/0.6A
Weight
Earphone output
20Hz-20kHz
Working
temperature
08
7``color TFT
220mmX150mmX34.5mm
470g
5 C~45 C
Portable DVD parts name and function
Keypad of the main unit
Front of the player
1
4
2
3
5
3
6
1
2
3
4
7
1.
1.TFT cover
2.LCD display
3.Speakers
4.
Control keypad
5.IR receiver window
6.Power LED indicator
Button
Press this to play disc. When press this
in the play mode, pause mode is set. Press
again to resume playback.
2.
Button
Press this to stop play mode
LED light: Power switch is on
3.
LED off: Power switch is off
/
Buttons
Using these buttons to scan backward or
forward through the tracks or chapters.
7.Open TFT cover
4.
Pull the part according to the direction
then open the TFT cover.
Button
Press these buttons to increase/decrease
the volume when the main unit is in play mode.
09
5
Monitor parts name and function
Keypad of the monitor
Front of the monitor
P/P
MENU
1
2
3
1
2
4
MUTE
3
MODE
4
M /M+
5
1. P/P Button
2
Press the button to set BRIGHT or PASTEL
or VIVID or STANDARD or NORMAL.
2. MENU Button
Press the button to select Brightness,
Contrast,color,then use M-/M+ buttons
to adjust.
1.LCD display
2.Speakers
3.Control keypad
4. Power LED indicator
3. MUTE Button
Press the button to mute the audio output.
4. MODE Button
Press the button to select screen NORMAL L
TO R or NORMAL R TO L or REVERSE L TO R or
REVERSE R TO L,then use M-/M+ buttons to adjust .
LED light: Power switch is on
LED off: Power switch is off
5. M /M+ Buttons
Press these buttons to increase/decrease
the volume when the monitor is in play mode.
Press these buttons to adjust Brightness,
Contrast,Color.
Press these buttons to adjust screen mode.
10
5
Portable DVD parts name and function
Back of the player
right side of the player
2
2
1
1
1
1.Support
1.Memor y card socket (optional)
Suit for SD/MMC/MS card reader
Pull out the support to the proper
position in order to let the unit
stand.
2.USB(1.1)socket (optional)
connecting USB storage
2. Battery cover
Open the batter y cover and place
six rechargeable AA 1.2V batteries
into it.
11
5
Portable DVD parts name and function
Top of the player
Left side of the player
ON/OFF
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
1
1
2
3
4
1. Earphone jack,
1.Power switch
connecting to earphone
Turn ON/OFF the unit
2. Audio/Video input or output,
input/output audio/video signal
3. 12V DC output
Connecting to the monitor.
4. 12V DC input
Connecting to the AC-DC adapter or car
adapter.
12
5
Monitor parts name and function
Back of the monitor
Left side of the monitor
AV I N
1
1.Support
1
1
Pull out the support to the proper
position in order to let the unit
stand.
2
DC O UT 1 2V
3
1. Earphone jack
connecting to earphone
Top of the monitor
2. Audio/Video input
Input audio/video signal
ON/OFF
3. 12V DC output
1
1.Power switch
Turn ON/OFF the unit
4. 12V DC input
Connecting to the DVD Player.
Push power switch to ON to turn on
the monitor when the unit is power,
power indicator led light.
Push power switch to OFF to turn off
the monitor,power indicator led off.
13
DC I N 12 V
4
5
Portable DVD parts name and function
Remote control unit
1
Power on/off the unit
1
2
8
9
10
11
15
13
18
20
21
22
23
24
OK
4
3
2 MODE
5
7
6
12
14
16
17
19
25
26
3 OSD
Press this to switch LCD mode
Press this buttons to
displaythe disc and playing
information in the LCD
4
Switch off the speakers
or earphone
5 VOL+
27
28
29
6 VOL-
30
7
Increasing the volume
Decreasing the volume
Return to menu.
8 SETUP
Set up menu when the unit in play mode
9
Moving cursor Up
14
5
Portable DVD parts name and function
Remote control unit
20
10
Moving cursor let
11 OK
Confirm settings
12
Moving cursor Right
13
Moving cursor down
14
Stop playing disc
15
Skip previous track/chapter
16
Skip next track/chapter
17 ZOOM
Zooming the picture
18
19
27 Title
Press this to play or pause
21 REPEAT
DVD: repeat play the title,
chapter
VCD,CD: repeat the track or
whole disc
22 A-B
Displaying DVD title
28 Angle
Press this to select
the DVD angle
29 C
Clearing the digit
that is just input
Press this to set A point, press
30 DIGIT INPUT
again to set B point, then the
unit starts playing from A to B repeated.
Press for the 3'rd time to cancel the A-B play.
23 Audio
DVD: selecting audio
language
VCD or CD: Selecting
the audio channel
24 SUBTITLE
Selecting sub-title
Press this for fast backward
25 MENU
play when the unit is in play mode
Menu play
Press this for fast forward play 26 PROGRAM
Programming the play
when the unitis in play mode
sequence
15
5
USING REMOTE CONTROL UNIT
Precautions before using remote control unit
Please pull out the PVC when the remote control unit is used for the first time.
Don't drop or step on the remote control unit or subject it to shocks
Note that it may not be possible to operate the main unit if there are obstacles between
it and the remote sensor
Don't expose the remote sensor to strong light.
Using the remote control unit within the specified operating range.
Remote control unit operating range
。
+ 30
<1> Horizontal:+ 30。
<2> Vertical: <3> Distance: 5m
AV I N/ OU T
DC O UT 1 2V
6
DC I N 12 V
<5m
Note:
OK
Most of the player's functions can be performed from
the remote control unit. Some operations, however,can
only be performed from the main unit.
16
USING REMOTE CONTROL UNIT
Replacing
1
the battery
Place your finger nails onto A on the
diagram below, push A according to the
direction, then open the battery cover .
A
R03"AAA"1.5V batter y
2
Remove the old battery, then insert
the new battery into the battery
holder with the + side correctly.
3
Fit the battery holder back to its
place.
17
Note:
To prevent leakage of fluid from the
battery, remove the battery when not
using the remote control unit for long
periods of time (one month or more).
If the battery leaksfluid, carefully
wipe it out of the battery case, then
change to a new battery.
6
USING THE BATTERY
Precautions before using the battery
Battery life
Please fully charge the battery unit before
using it for the first time.The rechargeable
time is about 12-15 hours.
When the battery unit is recharged in a hot
environment, it may not recharge fully
The battery unit becomes hot after recharging,
but this is not malfunction.
To prevent leakage of fluid from the battery,
remove the battery when not using the unit for
long periods of time(one month or more). If the
battery leaks fluid,carefully wipe it out of
the battery case, then change to new batteries.
Battery storage
Please place the battery in a proper environment
(15℃ 25℃). To avoid place the battery in a hot
or lower temperature environment.
Please recharge one time every year if the
battery is not used in a long time.
18
The battery unit can be used for about
300 cycles of recharging and operations,
though this is variable depending on the
operating conditions.
Using the battery
The main unit can be playing over 1.5 hours
if the battery is fully recharged.
The picture may be unstable if the battery
power is not enough.
7
USING THE BATTERY
Installing and removing the battery
1. Please install the battery as following:
<1> Push A of the battery cover (back of the
player) according to the direction;
<2> Place the battery into the battery slot,
make sure that + side of the battery is
connected to the battery slot correctly ;
<3> Tighten the battery cover.
A
Note:
Please use rechargeable AA 1.2V/1800mAh(up)
batter y only.
2. Please remove the battery
as follows:
7
<1> Turn off the player;
<2> Push A according to the direction;
<3> Take out the battery.
A
19
USING THE BATTERY
Recharging the battery by using AC-DC adapter
Please recharge the battery as follows:
1 Install the battery
2 Connect the AC-DC adapter to the player
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
The charging time is around 16 hours
Cautions when charging the battery
The temperature during recharging affects the recharging efficiency.
Recharging is most efficient between temperatures of 10℃ 30℃.
To protect the battery unit, do not recharge a fully charged battery unit repeatedly.
Repeated overcharging the battery may deteriorate the battery performance.
When the battery unit is hot, it may take longer than usual time for recharging or may
sometimes be unable to be recharged. Wait for the battery unit to cool down before
retrying recharging.
20
7
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to AC-DC adapter
1. Please plug the AC-DC adapter to AC
power socket;
2. Connecting the DC output of adapter
to DC in of the main unit.
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
Note:
AC-DC adapter specification: 12V/1.0A
Please use the adapter that comes as
standard accessory of the main unit.
Connecting earphone
Connect the earphone plug securely to
the earphone jack of the main unit.
To listen to the audio, using
to
adjust the volume to a comfortable level.
Main unit
left side
AV I N/ OU T
To earphone jack
Earphone
Note:
Please do not use DTS disc. Strong
noise is produced when DTS discs
are played.
DC O UT 1 2V
Note:
Insert the earphones plug securely.
No sound will be heard unless the
earphones are securely connected.
21
DC I N 12 V
8
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to USB storage (optional)
1 Please connect the USB storage
to the USB terminal of the main
unit
2 The main unit can read the
contents of the USB storage
automatically
USB storage
Note:
The USB terminal of the main
unit supports USB 1.1 only.
The main unit can read the
contents of USB storage when
there is no disc in the main unit.
Main unit
right side
SD /M MC /M S CA RD
Connecting to memory card (SD/MMC/MS) (optional)
1
2
Please insert the memory card to the
memory socket of the main unit
The main unit can read the
contents of the memory card
automatically
SD /M MC /M S CA RD
Note:
Please insert the memory card in the
right direction.
The main unit can read the contents
of the memory card when there is no
disc in the main unit.
Memory card
22
8
CONNECTING THE PLAYER TO OTHER COMPONENTS
Before connecting
Turn off the power of the player and the devices to be connected.
Connecting to a TV set
Audio/video output/input
Main unit
left side
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
Black
Video / audio cable
(included)
White
Red
Audio input
R
Note:
L
Yellow
Video input
T o video input jack
(yellow)
T o audio input L jack
(white)
T o audio input R jack
(red)
Please set the main unit to AV output mode.
TV
23
: Signal flow
8
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to a digital amplifier
A u dio/video o utput / i n p ut
Ma i n u n i t
le f t s i d e
Notes:
Do not play DVDs when the
audio settings are not
correct. This may cause
strong noise and damage
your speakers.
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
Bla c k
,
: Signalflow
Video / audio cable
(included)
White
Red
To d ig i t a l a udio
in p u t j a c k
Y e l low
Video in p ut
Audio i npu t
TV
Left
24
right
8
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to active speaker systems
A u d i o /video o u t p u t/inp u t
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
Main unit left side
Black
Video/audio cable
(included)
: Signal flow
Note:
Please set the main unit
to AV output mode.
To video input
jack
To Audio input
jacks
V i deo i n p u t
W hite
LEFT
R ed
Y e l l ow
Active speaker systems
25
8
RIGHT
TV
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to a Audio/Video player system if you want the unit as a monitor
Audio/ video o utput / i n put
Main unit left side
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
B lack
Video/audio cable
(included)
: Signal flow
Please set the main unit to
AV input mode.
Yellow
Red
Note:
W h ite
To Audio Output
jacks
VIDEO OUT
To Video Output
jacks
Connect to AV system
video output
AV system
AUDIO OUT
L
R
26
8
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to a
monitor
A u d i o/video i n p u t
Monitor left side
DC O UT 1 2V
AV I N
DC I N 12 V
To audio/video
input jack
To DC IN jack
AC&DC cable
(included)
: Signal flow
Note:
Please set the main unit to
AV input mode.
AV I N/ OU T
The main unit left side
To Audio/video
output jack
DC O UT 1 2V
DC I N 12 V
To DC out jack
8
AC-DC adapter
27
BASIC OPERATIONS
Turning on/off the main unit
1 Turn power on
Push power switch to ON ( main unit) to turn
on the unit when the unit is powered,
power indicator led light.
Power
OK
2 Turn power off
Press POWER (remote control unit) or push
power switch to OFF (main unit) to turn
off the unit, power indicator led off.
9
28
BASIC OPERATIONS
Placing discs
Playing discs
1.Reading disc,
2.The disc will be played automatically
3.Press PLAY to start to play
Removing disc
1.
2.
3.
4.
Power on the player
Open the TFT cover
Placing the disc
Close the TFT cover
1
2
3
4
Note:
Press STOP to stop play
Open the TFT cover
Take out the disc
Close the TFT cover
Please place the disc carefully
Please don't use a bad disc
9
29
BASIC OPERATIONS
Mode settings (Brightness/Contrast/Color/TFT display mode/TFT Reverse mode/AV out/in mode(optional))
Please press MODE (remote control unit) to select a
suitable mode when the main unit is
in play mode.
1
2
3
4
5
6
Press MODE, setting brightness;
Press MODE, setting contrast;
Press MODE, setting color;
Press MODE, setting LCD display mode;
Press MODE, setting reverse mode;
Press MODE, setting AV output/input mode(optional)
MODE
OK
The unit will stop play the disc when it is
in AV input mode
Please do not connect signal input when the
unit is in AV output mode
AV output mode is default mode.
Note:
Please press
/ (In the remote control unit) to adjust.
9
30
BASIC OPERATIONS
Stopping the playing
1 Press STOP to pause the
playing, the unit can
memorize the stop point
2 Press PLAY to continues
play from the pausing point
3 Press STOP to stop the disc
Scanning forward and backward
1. Press
/ (remote control unit)
1.5 seconds for fast playing in forward/
backward direction:
2. Change the playing speed to X2, X4,
X8, X20 and normal with every push of
REV/FWD on the remote control unit.
OK
STOP
PLAY
Note:
This function is not available for all
disc.
OK
Pausing the disc
REV
1 Press PLAY/PAUSE to pause
the playing when playing
2 Press PLAY/PAUSE to
continues playing
FW D
OK
PLAY/PAUSE
9
31
BASIC OPERATIONS
Repeat playing the disc
1
Zoom playing
A-B play mode
Press ZOOM every times,
the picture will change to
2X, 3X, 4X, 1/2X, 1/3X,
1/4X and normal.
Press A-B, the LCD will show
Repeat APress A-B again, the main
unit will repeat the play
from A to B.
Press A-B again, the unit repeat
"A-B "
will resume normal
playing.
OK
ZOOM
2 Repeat playing the title, chapter or track
Press REPEAT to select the title,
chapter or track when the unit is in
play mode
DVD: title, chapter; VCD or CD: track.
9
32
BASIC OPERATIONS
Program playing
The main unit may play the list according to the following
program list:
1. Press PROGRAM, the menu
will show :
PROG
Hint:
T is for Title, C is for
Chapter for DVD disc.
T for track for CD,VCD.
1
2
3
4
T
-----
C
:
:
:
:
Play
--- 5
--- 6
--- 7
--- 8
T
-----
C
:
:
:
:
Clear
T
--- 9 ----10 ---- 11 ----12 --
C
: ---
T C
: 001 5
02 : 002 6
-- : --- 7
-- : --- 8
1 01
2
3
4
: --: ---
Play
T
-----
C
:
:
:
:
Clear
T
--- 9 ----10 ---- 11 ----12 --
C
:
:
:
:
---------
Exit
3. Using the cursor key to move the
cursor to the PLAY icon, and press
OK to start playing the list
4. Using the cursor key to move the
cursor to the CLEAR icon, and press
OK to clear the play list.
5. Press PLAY/PAUSE or select the
EXIT icon and press OK to exit
program menu.
: ---
Exit
Note:
There is no title, chapter or track for some disc.
Program
OK
PROG
Note:
OK
The program list will be canceled when
the main unit is powered off orthe disc is ejected.
There is no program function for some disc.
The unit can not play the list if you
select the item that does not exit in
the disc.
9
2. Using
and cursor to select the
desired list. See the picture.
33
BASIC OPERATIONS
Selecting an audio language
Using OSD
1. Press OSD to show the playback and disc
information on the LCD when the main unit
is in play mode
2. Press OSD again to disable the function.
1. Press AUDIO to select the audio
language when the main unit is in play
mode for DVD disc
2. Press AUDIO to select the audio
channel when the main unit is in play
mode for VCD, CD disc.
OSD
AUDIO
OK
Selecting a sub-title
Selecting an angle
Press SUBTITLE to select the sub-title languages
when the main unit is in play mode
Press ANGLE to select the play angle
when the main unit is in play mode for
DVD disc, there is no function for
other discs.
SUBTITLE
Angle
9
34
BASIC OPERATIONS
Playing audio files and JPEG disc
[MP3_1] 1001.MP3
1
0 1 . M P 3 _ 1
2
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 3 . 1 0 0 3
0 4 . 1 0 0 4
3
1.
4.
Directory
JPEG icon
4
2.
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 3 . 1 0 0 3
File
3.
Audio icon
0 4 . 1 0 0 4
Using the cursor key
to move the cursor to the directory, file, icon
or JPEG icon
Selecting
icon and press OK if you want to play audio files, selecting JPEG icon
and press OK if you want to play JPEG
Selecting a file and press OK if you want to play the file.
Press PLAY/PAUSE to play sequence
Press A-B to repeat A-B playing.
Note:
The LCD will Turn off when there is no activity on the unit for over 3 minutes when playing
CD.
LCD will be on for any operation on the unit .
35
9
BASIC OPERATIONS
Playing the file storing in a USB storage(optional)
Playing the file storing in a memory card(optional)
Connect on the USB storage to the USB socket
of the main unit, the file stored in the storage
will be read automatically.
Please insert the card (SD,MMC and MS) in to the
socket. The file will be played automatically.
1.Power on the unit, connecting the USB storage
to USB socket. (in no disc mode)
2.“READ USB” will be shown in LCD and the
files will be displayed in the LCD when the unit
finished the reading.
1. Power on the unit, inserting the card in to
the socket. (in no disc mode)
2.“READ CARD” will be shown on the LCD and
the files will be displayed on the LCD when the
unit finished the reading.
[MP3_1] 1001.MP3
0 1 . M P 3 _ 1
[MP3_1] 1001.MP3
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 1 . M P 3 _ 1
0 3 . 1 0 0 3
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 4 . 1 0 0 4
0 3 . 1 0 0 3
0 4 . 1 0 0 4
3. Operation is like playing audio files or JPEG files
4. Please remove the USB storage directly when
not using the USB storage
Audio, video and JPEG file can be
played on this unit
The SD , MMC and MS can be read in this unit
Note:
USB in this unit is USB 1.1
The unit must be in no disc mode when
the file stored on the USB is played.
Note:
The unit must be in no disc mode when
the file stored on the card is played
36
9
MAIN UNIT SETTINGS
Press SETUP when the main unit is in play mode. The set up menu will be displayed in LCD.
Selecting a TV system
Setting screen saver
Please select the proper video signal
system if you want to watch with a TV set.
NTSC: please select this item when TV set
is NTSC system TV set
PAL: please select this item when TV set
is PAL system TV set
Default:NTSC
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
This function can protect the TFT life if the
unit stays in stop for more than 1 minutes.
ON: screen saver enable
OFF: screen saver disable
Default: ON
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
NTSC
PAL
EXIT SETUP
ON
OFF
EXIT SETUP
Note:
The picture may be a grey picture if the
system is not correctly set.
37
10
MAIN UNIT SETTINGS
Selecting a TV scale
Setting parent lock
16:9 : Please select this item when
connecting this unit to a 16:9 TV set.
4:3LB : Please select this item when
connecting this unit to a normal TV set.
1.
Default setting: 0000
2.
When unlock, new parent lock can be
input and select the parent lock level
4:3PS : Please select this item when
connecting this unit to a normal TV set.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
4:3PS
4:3LB
16:9
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
/
/
/
EXIT SETUP
退出设定菜单
EXIT SETUP
Note:
Picture scale is depending on the disc.
38
10
MAIN UNIT SETTINGS
Setting parent lock level
Default setting
This setting can control the unit play parent
lock DVD disc.
To restore the factory setting, please
select this item and press OK
Level is divided into 8 level
Selecting ADULT, the lock is cancel
Default: ADULT
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1
2
3
4
5
6
7
8
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
KID SAFE
G
PG
PG13
PG-R
R
NC-17
ADULT
RESTORE
EXIT SETUP
Note:
The parent lock level can not be
set if the parent lock is locked.
39
10
MAIN UNIT SETTINGS
Selecting a OSD language
Selecting a sub-title language
Please enter the sub-title language select
menu, use cursor key
to move the cursor
to the desired language and press
OK
Please enter the OSD language select menu,
use cursor key
to move the cursor to the
desired language and press OK
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
CHINESE
GERMAN
SPANISH
FRENCH
FORTUGUESE
EXIT SETUP
EXIT SETUP
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
FORTUGUESE
GERMAN
OFF
Select a menu language
Please enter the menu language select
menu, use cursor key
to move the cursor
to the desired language and press
OK
Selecting an audio language
Please enter the audio language select menu,
use cursor key
to move the cursor to the
desired language and press OK
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
FORTUGUESE
LATIN
GERMAN
EXIT SETUP
Note:
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
FORTUGUESE
FRENCH
LATIN
The language will be the disc default
language if the language you want is
not visible
Default language: English
40
10
TROUBLE SHOOTING
Trouble shooting
Please refer the following instruction when there are some problem with this unit. If the
problem still exit, please consult your nearest service center.
PROBLEM
POSSIBLE REASON
Disc error
Disc can not play
No picture in TV
Speaker no sound
No sound in TV
or amplifier
Disc dirty or scratch
SOLUTION
Place disc in right direction
Using good disc
Area code error
Using right area code disc
Cable loosen
Setting error
Earphone in use
Cable loosen
Insert the cable again
Set TV or this unit correctly
Removing earphone
Insert the cable again
Connecting cable error Connecting cable correctly
Different volume Disc recording in
for DVD/CD disc different way
Adjust volume level
41
11
-PDV7030
EN--V0.1-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement