TUTA B2 GSM Remote Camera User Manual
Below you will find brief information for GSM Remote Camera TUTA B2. The TUTA B2 is a remote controlled image-capturing device that can send images to your multimedia messaging (MMS) enabled mobile phone with color display, or to an email address. You can control and change the camera settings via SMS command. The camera is also equipped with infrared lights for clear images even in dark environments, and a motion detection function to notify you via SMS, MMS, standard calls or email of any unauthorized entry. The TUTA B2 can be integrated with standard 433MHz wireless sensors such as PIR-, door magnet- and smoking sensors.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
TUTA Series
GSM REMOTE CAMERA
User Manual
Manual version 2.4
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
TUTA Series GSM Remote Camera
Thank you for purchasing the TUTA camera. This camera is a remote controlled image-capturing device consisting of a microphone, infrared lights and a high quality
300,000-pixel camera lens. The TUTA camera can capture images according to a preprogrammed remote command and then send it to your multimedia messaging
(MMS) enabled mobile phone with color display, or to an e-mail address. You can control and change the camera settings via SMS command.
The MMS sent by the TUTA camera can be viewed by using your mobile phone. You also can opt to view a slide of consecutive photos taken by the GSM Remote camera.
The built-in high-light infrared LED’s allows the camera to capture clear images, even in dark environment.
The TUTA camera is compatible with standard 433MHz wireless sensors such as
PIR-, door magnet- and smoking sensors.
As soon as the wireless sensor triggers the camera alarm, you or your families and/or your guards can thus receive the alarm message via SMS, MMS or standard calls, according to the pre-programmed.
However, the camera can perform its duty well without any wireless sensor too. The
TUTA has a motion detective function and an integrated infrared body detector. It will therefore detect any unauthorized entry into your house and notify you via SMS,
MMS, standard calls or E-mail.
All services and functions need to be supported by the GSM network and a SIM card.
This brochure suits for TUTA-B2 model.
Details of the functioning and advanced operation of this camera are described in this instruction manual.
2
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
CONTENTS
3
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
4
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
5
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
1. Purchase a GSM SIM card (mobile phone card) from GSM network service and install it in the camera. This SIM card number is referred as TUTA camera number on this brochure.
2. The user needs to activate the MMS function and Caller ID Presentation function of SIM card, and deactivate PIN code of the SIM. Contact with
GSM network service for support.
3. Change the original password at the beginning use. Be sure to keep the password and SIM card number secret. Do not disclose this information to anyone other than the authorized users in order to ensure your safety.
For your safety
λ
λ
λ
λ
λ
This product is a wireless signal transmission device. Keep it away from electronic equipment likely to interfere with the wireless signals, in order to avoid signals interference.
Switch off your TUTA and mobile phone when entering areas marked
"Explosive", "Might explode", "Closed wireless transceiver devices" etc.
Do not cast this product in a fire, as this may cause the battery to explode.
This product should only be operated from power approved by the product manufacturer. The use of any other types of power may damage the product.
Keep the product and its accessories out of the children reach.
Exception clause
1. We operate on a policy of continuous development. We reserve the right to make changes and improvements to any of the products described in this document without prior notice.
2. For the latest product information, please visit: http://www.i-tuta.com. We don’t guarantee for the document veracity, reliability or any content except regulate in proper laws. Including no guarantee for product suitable market or suitable area promise.
3. Use only this product according to the law. Respect one another’s privacy.
Neither monitor another’s home nor private. We hold no responsibility for the
6
TUTA-B2 GSM REMOTE CAMERA USER MANUAL illegal use of this product.
4. We hold no responsibility for any loss of data or income; or any special, incidental, consequential or indirect damages howsoever caused.
5. The contents of this document are provided “as is”. Except as required by applicable law, no warranties of any kind, either expressed or implied, including, but not limited to the accuracy, reliability or contents of this document. We reserve the right to revise this document or withdraw it at any time without prior notice.
Chapter 1 Features and accessories
1.1 Main function
λ
λ
λ
λ
λ
λ
λ
λ
λ
λ
λ
This product uses a GSM SIM card. It can send multimedia messaging
(MMS) images to MMS enabled mobile phones with color display or to an Email address.
Remote control: Control and configure the camera with short messages
(SMS) commands from a mobile phone.
Real time audio: call the camera number (SIM card) to listen in live voice.
Motion detection: Detect and notify authorized users of any motion in the monitoring area(s).
Integrated infrared body detector.
Sensor detection: Allowed to load up to 15 sensors such as door magnet sensors, infrared body sensors, smoke sensors, gas sensors etc. Any activated sensor will notify the authorized users via SMS.
Infrared light: The built-in high-light infrared LED’s allows the camera to capture clear images, even in dark environments or areas with insufficient lighting.
High quality camera: 300,000 pixel CMOS camera in order to obtain a clear image via MMS.
Send images to mobile: The camera will send MMS images to your mobile.
Therefore you can check on the monitored areas at any time and anywhere
GSM/GPRS network coverage and MMS service coverage.
Send images to E-mail: The camera can send images to preset available Email address.
Multi-mode alarm: The camera can send alarm messages via SMS, MMS, Email or standard phone call.
7
λ
λ
λ
λ
λ
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Fixed time monitor: The monitoring schedule can be set with multiple time intervals.
Easy installation: Wireless connection. The camera can be installed at any place required by the authorized user.
Accessories: Includes 2 remote controls each consisting of a panic button as well as buttons to arm or disarm the camera.
Built-in lithium battery: Rechargeable battery ensures operation of TUTA camera amid external power failures.
Downloadable user manual: This manual can be downloaded at any time via
SMS command.
1.2 Package contents
1.
5.
Remote camera 1 unit
2.
3.
Power adapter(5.5V/2A) 1 unit
Remote control 2 units
4. User manual 1 unit
Mounting bracket 1 set
1.3 Products features
Figure 1: TUTA camera instructions
1. Power switch 8. Set key
2. Infrared body detector 9. Mini USB(rubber cover)
3. Indicator 10. Hanging hole 1
8
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
4.Camera 11. Power Interface
5. Infrared lights(12 pcs) 12. Back board (SIM card slot inside)
6. Mirror and Microphone 13. Hanging hole 2
7. Reset key
Tip: Keep the camera lens clean to insure best imaging quality.
TUTA-B2 mounting bracket
1.4 Remote control Instruction
Figure 2: Remote control Instruction
1.
Disarm the camera button 3. Arm the camera button
9
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
2.
Remote control indicator 4. Emergency button
Battery: There is battery holder on the rear of the remote control. It needs one 3.0Voltage
CR2032 battery. When this battery is running out of power, TUTA camera will emit “Beep, beep” warning tone and then send a SMS notification message to Master user.
1.5 Light indicator
Color
Red
Action
Flash slowly Searching the network.
Status
Flash quickly Sensor alarm, motion detection alarm, infrared body detector alarm.
Constant Light Not installed SIM card, or the remote camera damaged.
Green
Orange
Red and
Constant Light Armed status.
Flash slowly Disarmed status.
Flash quickly Processing data.
Light 2 seconds Successfully reset factory setting, or loading sensor.
Flash Loading remote control status.
Two color lights Loading sensor
Green alternately
Note: Slow flash 1 time per second, quick flash 2 times per second.
10
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Chapter 2 Installation
2.1 Install the SIM card
•
Remove the back board from the rare of TUTA camera.
•
Insert the SIM card into the slot.
•
Get back the back board of TUTA camera.
2.2 Install the host mounting bracket
11
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
2.3 Connecting to power adapter
•
•
•
•
•
Connect the adapter to an AC power, and connect the plug to the power interface of the TUTA camera .(See Figure 1 TUTA camera Instruction)
This camera has a built-in rechargeable Lithium battery.
The camera will notify the user when the power changes. For example, if the power adapter is disconnected or failure of the AC power occurs, TUTA camera will notify the user “External power cut. The device is operating on battery.”
If TUTA camera is again connected to the external power, or the AC power is available again, the notification will be sent to the user, i.e.” The device is now resuming the use of external power source.”
Low battery: The configure setting can not be saved when TUTA camera is operating on low battery.
2.4 Mount the TUTA camera
TUTA camera can be mounted on a wall (vertically with the screws) or put down on any suitable horizontal surface.
How to choose the Installing place:
λ
In order to capture better image quality, avoid any areas where bright light will be irradiated directly into the lens of the camera on the camera.
λ In order to avoid backlighting photography, it is suggested that the camera is located at the place where can look down the monitoring place with the
λ minimum angel 30°.
The GSM network’s signal strength may affect the image, live voice quality and MMS transmission speed. Therefore, upon installation, the user should ensure that TUTA camera is located in an area with a strong network signal.
λ After installation, the user should perform a test-run by taking several images and sending it to the user’s mobile phone. This allows the user to check the image quality of the camera. The position of TUTA camera can then be adjusted until a satisfactory image quality level is reached.
2.5 Power on/ off
Power on:
Operation Indicator light
Turn the power Red light is on for 3-5 seconds.
12
Status
TUTA-B2 GSM REMOTE CAMERA USER MANUAL switch to “On” position.
Red light flashing slowly for about 35 seconds.
A “Beep…” tone will be heard.
Green light flash slowly, or green light be on constantly.
Power off:
Turn the power switch to downside “Off” position.
TUTA camera is disarmed, or armed.
Chapter 3 Define the user
3.1 User authorization level
There are three levels, each with a different authorization level, namely Master,
Families and Guest.
Table 3.1 the difference in authority for Master, Families and Guests users:
User Type
Master Families Guests
Functions
Change authority, password
YES
NO NO
Automatic
Alarm
Receive SMS
Receive MMS
Receive alarm calling
Get images by E-mail
Receive SMS Emergency alarm
Receive MMS
Receive emergency calling
Call the camera to listen in live voice
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
NO
NO
NO
NO
NO
NO
NO
NO NO
YES (Only emergency number)
YES
NO
Get work status, images, help and instruction by sending SMS command
YES YES YES(Password)
Get images by E-mail
Set remote camera by SMS command
Add, modify or delete sensor
Camera language setting
Set infrared body detect function
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
NO
NO
NO
NO
NO
Note
13
•
•
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Any MMS enabled mobile phone can receive the images captured by TUTA camera by sending SMS command with password.
Any SMS enabled mobile phone can control TUTA camera with the password command.
All the settings of TUTA camera can be set or adjusted via a SMS command.
About the SMS Command:
1)
Master and families users’ SMS command format: #code#content#.
2)
3)
Guest users’ SMS command format: #code#password#content#.
The password must be a four-digit number.
4)
5)
6)
The original password is 1234.
The maximum digits that are allows for the phone number is sixteen.
TUTA camera will reply to the user after it receives the SMS command.
•
•
Note
The “#” symbol must not be ignored when typing an SMS command.
No allow any space within the commands.
3.2 Define Master user to start the camera
In order to enable all the functions on the camera, the Master user must store his/ her mobile number in the camera’s memory. Only one Master’s mobile number
(Master number) is allowed for a camera.
3.2.1 Add a master number to the camera
Authority: Master user.
Description
If TUTA camera is being used for the first time, or TUTA camera has been reset, the master user’s number must be programmed into the camera, in order to ensure activation. The following methods can be used:
Method
The user must edit and send the following SMS to camera via his/her mobile phone (the phone number will be the Master number) in order to:
Add a master number to the camera: #00# (1)
14
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Successful SMS reply
Welcome to the GSM Remote Camera. Your password is 1234.
Failed SMS reply
If a user tries to activate TUTA camera again, by using method 1, TUTA camera will hung up the call. No notification message (via SMS) will be sent to the user.
By using method 2, TUTA camera will send a notification via SMS stating
“Master user already exists.”
3.2.2 Change the master number
Authority: Master user
Method
The user sends following SMS message in order to:
Change the master user’s number: #14#
NewMasterNumber
Successful SMS reply
New master number is *********.
Then the old master user’s number will not be able to control TUTA camera anymore.
3.2.3 Change password
Authority: Master user.
Description
In order to ensure your privacy and safety during the use of this camera, change the password once TUTA camera is being used.
Method
Change the password: #04#
oldpassword
#
•
•
The user sends following SMS message in order to:
The password is a four digit number.
The original password is 1234.
Successful SMS reply
The password has been successfully changed to ****.
15
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Failed SMS reply
If a user, other than the master user, attempts to change the password, a notification message will be sent via SMS: “Sorry, you are not authorized to use this command.”
3.3 Define family user
Family users have the authority to listen in on the camera, receive images, load the sensors and remote controls to the camera, and receive notification when motion detection activated. The family user’s mobile numbers are set by the Master user.
The family users should remember and safeguard the camera’s SIM number.
3.3.1 Add a family number
Authority: Master user.
Method
The user sends following SMS message in order to:
Add a family number: #06#
FamilyNumber
Add several family numbers: #06#
FamilyNumber
#...#
FamilyNumber
• Up to 10 family users’ number can be stored on one camera.
Successful SMS reply
The family number has been added successfully.
3.3.2 Check family user’s number
Refer to Chapter 4.15 Check status.
3.3.3 Delete family number
Authority: Master user.
Method
The user sends following SMS message in order to:
Delete a family number: #113#
FamilyNumber
Delete several family numbers simultaneously: (7)
#113#
FamilyNumber
#…#
FamilyNumber
#
16
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Delete all family numbers: #113# (8)
Successful SMS reply
Family number deleted successfully.
Failed SMS reply
Failed to delete family number.
3.4 Define Guest user
Any selected person can operate in the Guest category if they know the password and the SIM number. The Guest user(s) can then use their mobile phones to send a
SMS command including password to TUTA camera in order to obtain an MMS image.
3.5 Define emergency number
The Emergency Number is the phone numbers which TUTA camera will dial when the emergency button of the remote control is pressed. Emergency numbers could be the telephone numbers of guards, family numbers, police etc.
3.5.1 Add emergency number
Authority: Master user.
Description
•
•
•
The master user’s number default to be emergency number.
When the Emergency button is pressed, TUTA camera will automatically dial the Master user’s number, followed by the other pre-set emergency numbers
(the default mode is dial phone mode).
Each camera can have up to 9 emergency numbers. (Not including the
Master user’s number).
Method
The user sends following SMS message in order to:
Add single emergency number on the camera: (9)
#106#
EmergencyNumber
#
Add several emergency numbers on the camera: (10)
#106#
EmergencyNumber
#…#
EmergencyNumber
#
17
•
•
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
The EmergencyNumber is the phone numbers.
Up to 9 emergency numbers can be stored on one camera.
Successful SMS reply
Added emergency number successfully.
Failed SMS reply
•
•
If 9 emergency numbers (the maximum amount per camera) are used on
TUTA camera and the master user attempts to add another one, the following notification message will be sent via SMS: “The Emergency numbers are full.
Please delete old numbers.”
If an existing number is being added again, the following notification message will be sent via SMS: “Emergency number already exist.”
3.5.2 Delete emergency number
Authority: Master user.
Method
The user sends following SMS message in order to:
Delete an emergency number: (11)
#107#
EmergencyNumber
#
Delete several emergency numbers: (12)
#107#
EmergencyNumber
#…#
EmergencyNumber
#
Delete all emergency numbers: #107# (13)
Successful SMS reply
Emergency number successfully deleted.
3.5.3 Check emergency number
Refer to Chapter 4.15 Check status.
Chapter 4 Basic use and settings
4.1 Network parameter settings
Authority: Master user.
18
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Note
In general, the user does not need to set the network parameter before use. The correct parameters have been set by the manufacturers according to every country’s respective GSM provider.
Description
If TUTA camera is unable to send MMS messages continually, The GSM provider’s MMS parameter must be added onto the camera. After successful settings, the camera will automatically choose WAP or HTTP to send MMS message.
Method
The user sends following SMS message in order to:
Set MMS center: #124#
MMScenter
• The MMScenter should be the MMS center address of GSM provider. For example: #124#http://mmsc.monternet.com#
Set APN parameters: (15)
#125#
GatewayIP
#
HTTPGatewayPort
# # # #
For example: #125#10.0.0.172#9201#80#cmwap#wap#wap#
After the settings of command 14 and 15, if TUTA camera is unable to send MMS messages continually, it means the MMS parameters on command 14 or 15 is incorrect. Command 16 can be used to remove the operative network parameters and then TUTA camera can auto-choose available parameters from its memory.
Command 17 can be used to check the operative network parameter settings.
Remove the operative network parameters and then auto-choose new
parameters from memory: #54# (16)
Check the operative network parameter settings: #55# (17)
Successful SMS reply
PAR:*********************.
4.2 Capture images
Authority:
Master/ family / guest send SMS to the camera to get the MMS image or send the image(s) to an appointed mobile or E-mail address.
19
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Master/ family member call the camera to get the images.
Master/ family send SMS command to the camera to send MMS image to an E-mail address (Need to pre-set E-mail address).
4.2.1 Capture one image and send to the user mobile
Authority: Master, family and guest users.
Method
Method 1:
• Master or family user calls the camera and hand up upon hearing the ringing tone (within 5 seconds).
• TUTA camera will reply SMS notification: “Image capturing request received.
•
•
The camera is busy sending the MMS messages.”
The user will then receive the MMS message momentarily.
The guest users are unable to capture an image by using method 1. If the guest users call the camera, it will neither send a notification message nor an
MMS message.
Method 2:
The user sends following SMS message in order to:
Capture one image and send to the user mobile:
For master and family users: #03# (18)
For guest users: #03#
password
4.2.2 Capture images and send to the user’s mobile
Authority: Master, family and guest users.
Method
The user sends following SMS message in order to:
Capture images and send to the user mobile:
For master and family users: #03#
ImageQuantity
For guest users: #03#
Password
#
• Image quantity should be in the range of 1-8 when the image size is set at
160×128 or 320×240 (See 5.1.1 image size.) The default image size is
•
320×240(QVGA).
Image quantity should be in the range of 1-2 when the image size is set at
640×480.
20
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Successful SMS reply
Your request received, TUTA is sending the MMS image.
•
The user will then receive the MMS message momentarily.
•
The file format of the sent MMS images is: “Model-Time.jpg”. For example, a file with name of TUTA-094843.jpg means the image is captured with a TUTA
• camera at 9:48:43AM.
If a sent MMS file has several sequential pictures, the size of the pictures is pre-set by user (See 5.1.1 image size.). The interval between the pictures is default 0.5s and can be pre-set by user (See 5.1.3 image Interval).
4.2.3 Capture images and send to user’s E-mail address
Authority: Master and family users.
Description
If the master or family user wishes to send the images to his/her E-mail address, the E-mail address must be set at first. See chapter 4.3 E-mail settings for more information regarding this function.
Method
The user sends following SMS message in order to:
Capture image(s) and send to pre-set E-mail: (22)
•
#03#
ImageQuantity
#1#
Image quantity should be in the range of 1-8 when the image size is set at
•
160×128 or 320×240.
Image quantity should be in the range of 1-2 when the image size is set at
640×480.
Successful SMS reply
Your request received, TUTA is sending the MMS image.
4.2.4 Capture images and send to an appointed mobile or
E-mail address
Authority: Master, family and guest users.
21
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Method
The user sends the following SMS message in order to:
Capture image(s) and send to appointed mobile or E-mail address:
For Master and family user: #30#
NumberOrEmail
#
For Guest user: #30#
Password
# #
•
•
NumberOrEmail should be the mobile phone number or E-mail address which the user appointed to send image.
Image quantity should be in the range of 1-8 when the image size is set at
•
160×128 or 320×240(The default image size). See 5.1.1 image size.
Image quantity should be in the range of 1-2 when the image size is set at
640×480.
Successful SMS reply
Sending to **** with * pictures.
• The file format of the sent MMS images is: “Model-Time.jpg”. For example, a file with name of TUTA-094843.jpg means the image is captured with a TUTA
• camera at 9:48:43AM.
If a sent MMS file has several sequential pictures, the size of the pictures is pre-set by user (See 5.1.1 image size). The interval between the pictures is default 0.5s and can be pre-set by user (See 5.1.3 image intervals).
4.3 E-mail settings
Note
This function should be supported by the local network provider. Please contact your local network provider for the details concerning this function.
4.3.1 Add/ modify an E-mail address
Authority: Master and family users.
Description
• Each user number can be set only one E-mail address. If more than one Email address is set onto one user number, TUTA camera will only recognize the E-mail address put in the last.
•
If the user wishes capturing an image and sending to his/her E-mail address, see 4.2.3 capture images and send to user’s E-mail address.
22
•
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
If the user wishes TUTA camera sending the alarm image to his/her E-mail address, see 5.2.10 MMS notification to pre-set E-mail address.
Method
The user sends following SMS message in order to:
Add/modify an E-mail address: #108#
EmailAddress
(25)
Successful SMS reply
Email address: *****
4.3.2 Delete all E-mail address(es)
Authority: Master user.
Method
The user sends following SMS message in order to:
Delete all E-mail address: #109# (26)
Successful SMS reply
E-mail addresses deleted successfully.
4.4 Timing send images to mobile
Authority: Master user.
4.4.1 Enable timing sends MMS images
Method
The user sends following SMS message in order to:
Enable timing sends MMS images: #115#1# (27)
Successful SMS reply
Set timing to send MMS activated.
4.4.2 Set time period to send MMS images
Method
The user sends following SMS message in order to:
23
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Set time period to auto-send MMS image: (28)
#116#
WorkDay
# # # #...#
StartTime3 EndTi
•
•
me3
#
#
Max allow 3 periods per workday. Each period time should set by start time, end time and interval.
WorkDay: one digit, the values lie in the range of “0” to “8”.
The following table contains the descriptions of each value:
•
•
Value
0
1
2
3
4
5
6
7
8
Corresponding day
Everyday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Monday to Friday
StartTime and EndTime: Be consists of 4 digits (hh:mm) and works on a 24 hour clock. For example: 0000 means time 00:00(hh:mm), 2359 means time
23:59(hh:mm). The StartTime and EndTime should be in the same day, and the EndTime must be later than StartTime.
IntervalTime: This consists of 2 or 3 digits and has values in the range of “10” to “480” minutes.
Successful SMS reply
Set timing to send MMS parameter is:******
4.4.3 Disable timing send MMS image
Method
The user sends following SMS message in order to:
Disable timing send MMS image: #115#0# (29)
Successful SMS reply
Set timing to send MMS de-activated.
24
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
4.5 Remote control
4.5.1 Add remote control(s) to the camera
Description
When a remote control is added to a camera, it can control the camera. A camera can be added up to 5 remote controls.
Method
Indicator
Green, flashing or constantly light.
Orange, flashing
Orange, flashing
Orange, flashing
Operations
1. Press and hold the Set key for 2 seconds
2. Press any button on the remote control (with battery inside) to send a signal to
TUTA.
3. Repeat step2 to load another new remote control.
4. Press the Set key to exit the learning mode or waiting for 15 seconds to auto-exit.
Status
Indicator light turns to orange
(Learning mode)
TUTA will emit a “Beep” tone and indicator will turn green for
2S. (Added successfully.)
Indicator light turns green, flashing or constantly light. (Exit learning mode)
Note
During the process of learning new remote control, if the battery of remote control runs out, TUTA camera will emit three “Beep…” tones and exit learning mode.
You need to replace the battery and try learning process again.
4.5.2 Remote control instruction
There are three buttons on the remote control:
A. Arm TUTA camera
B.
• When is pressed, the indicator light on TUTA camera will turn green. This
• indicates that TUTA camera is in armed mode.
Any motion detected by TUTA camera as well as any activation of added wireless detector will trigger the camera alarm and a SMS/MMS or phone calling notification will be sent to the preset numbers.
Disarm TUTA camera
25
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
C.
•
When
• is pressed, the indicator light on TUTA camera will slowly flash green. This indicates that TUTA camera is in disarmed mode.
TUTA camera will not detect any motion or receive sensor alarm signal.
Emergency button
• When
•
•
is pressed, the indicator light on TUTA camera will rapidly flash green. Then TUTA camera will dial the master user’s number. Live audio stream can be heard upon answering the emergency call.
If the master user does not answer the call, TUTA camera will then dial the other emergency numbers as preset order, until someone answers the call.
The master user’s number as well as the emergency numbers will be called a maximum three times. If it is still no one answers the call, TUTA camera will then exit dialing mode automatically.
•
When is pressed, TUTA camera could send a notification via SMS and
MMS instead of making phone calls. This all depends on the setting. Refer to
4.6 Emergency alarms.
4.5.3 Arming or disarming SMS notification
Authority: Master and family users.
Method
The user sends following SMS message in order to set:
No SMS notification message upon arming or disarming TUTA camera via
remote control: #137#0# (30)
Send SMS notification message upon arming or disarming TUTA camera via
remote control: #137#1# (31)
4.5.4 Remove remote control from the camera
Authority: Master and family users.
Method
The user sends following SMS message in order to:
Remove all remote controls from the camera: #111# (32)
Successful SMS reply
26
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
All remote control deleted successfully.
4.6 Emergency Alarms
Authority: Master and family users.
Description
When the emergency button (panic button) on the remote camera is pressed,
TUTA camera will go into emergency mode to alarm. There are two modes of the emergency alarm could be set on the camera:
Emergency Mode1 (Default): To dial the master user’s number as well as the preset emergency numbers. When the emergency button is pressed on the remote control, TUTA camera will dial the master user’s number as well as the pre-set emergency numbers. TUTA camera will repeat this process 3 times, until someone answers. If, after 3 attempts, there is no answer, TUTA camera will automatically stop dialing and revert to its preset mode. In the case of someone answers, he/she will be able to listen in the live audio.
Emergency Mode2: To send a notification via SMS and MMS to the master user as well as the pre-set emergency numbers. When the emergency button is pressed on the remote control, TUTA camera will send the notification via SMS and MMS to the master user as well as the pre-set emergency numbers.
Method
The user sends following SMS message in order to set:
Emergency Mode1 (To dial the master user’s number as well as the pre-set emergency numbers): #39#0# (33)
Emergency Mode2 (To send a notification via SMS and MMS to the master user as well as the pre-set emergency numbers): #39#1# (34)
Successful SMS reply
Alarm by dialing emergency number has been set successfully.
Alarm by sending SMS and MMS has been set successfully.
4.7 Listen in live voice
4.7.1 Call the camera to listen in
Authority: Master and family users.
27
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Method
The user calls TUTA camera after which it will answer automatically. The user can then listen in the live audio in the monitoring area. Only one line can be connected to TUTA camera at a time.
4.7.2 Listening in upon emergency alarm
Description
•
•
When TUTA camera is in arm or disarm status, it will automatically dial the
Master user’s phone number if the emergency button is pressed. The Master user can listen in by answering the call.
If the Master user does not answer the call, TUTA camera will automatically dial the other emergency numbers sequentially. This notification process will repeat three times and if still unanswered, TUTA camera will automatically exit the dialing mode.
4.7.3 Listening in upon automatically alarm
Description
•
•
When TUTA camera is in armed status and if the user preset the auto-alarm
way as calling the user (Refer to chapter 5.2.8 Call notification upon alarm for
the details of preset alarm) a call will automatically go through to the Master user’s preset numbers when the camera alarms. The user can listen in the monitoring area by answering the call.
If the Master user does not answer the call, TUTA camera will dial the other pre-set Family number until the call is answered. This notification process will be repeated three times and if still unanswered, TUTA camera will automatically exit the dialing mode.
4.8 Infrared body detector
Authority: Master and family users.
Description
When TUTA camera is working under arming mode, if someone approaches to the detecting area, the built-in infrared body detector will trigger the camera
28
TUTA-B2 GSM REMOTE CAMERA USER MANUAL alarm.
Method
The user sends following SMS message in order to:
Activate infrared body detector (default): #118#1# (35)
Deactivate infrared body detector: #118#0# (36)
Successful SMS reply
Infrared body detector activated.
•
Infrared body detector deactivated.
When the infrared body detection alarms, the notification pictures will be sent on one message via MMS. The default quality of individual picture is 5 and the size is 320×240 pixels. In order to change the setting, see chapter 5.1.1
Image size and chapter 5.1.2 Image quantity when alarm.
Note
When the camera is operating on low battery, the infrared body detector will be deactivated and the configure setting can not be saved.
4.9 Motion detection
Description
•
•
•
•
The motion detection feature is based on image frame compare technology.
The firmware will compare front and after images which capture from camera and therefore detect motion.
The motion detection feature only functions when TUTA camera is armed. i.e., arming TUTA camera enables the motion.
The motion detection feature is also functional when TUTA camera is in its default setting.
When the motion detection alarms, the notification pictures will be sent on one message via MMS. The default quality of individual picture is 5 and the size is
320×240 pixels. In order to change the setting, see chapter 5.1.1 Image size and chapter 5.1.2 Image quantity when alarm.
Note
•
If TUTA camera faces an object that moves constantly, such as a tree shaking in the wind, it will send alarm message constantly. Recommend to use the camera in a still place.
29
•
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Low battery: The motion detection function will be deactivated and the configure setting can not be saved when TUTA camera is operating in low battery.
4.9.1 Activate/Deactivate motion detection
Authority: Master and family users.
Method
The user sends following SMS message in order to:
Deactivate motion detection(default setting): #22#0# (37)
Activate motion detection: #22#1# (38)
Successful SMS reply
Motion detection de-activated.
Motion detection activated.
4.9.2 Send five Images upon motion detection alarm
Authority: Master and family users.
Description
TUTA camera will send out 5 images with fixed size of 160
×
128 pixels when motion is detected.
Method
The user sends following SMS message:
Send five images upon motion detection alarm: #142# 1
Cancel send five images of motion detection alarm: #142# #
4.10 Wireless sensor(s)
Authority: Master and family users.
Description
Any 433MHz wireless sensor, such as infrared body sensor, wireless door magnet, wireless smoke detector etc. can be set as an alarm sensor of the camera.
30
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
4.10.1 Add a wireless sensor and set corresponding alarm mode
Authority: Master and family users.
Description
• Up to 15 wireless sensors can be loaded onto one TUTA camera.
Method
1. Power on the wireless sensor.
2. The user sends following SMS message to:
Make TUTA camera enter loading mode and set corresponding alarm mode:
#05#
SensorDescription
(41)
• Sensor description is used for identify different sensors affiliated with each camera. It can be numbers and letters.
• Sensor description could be empty. If SMS command is only #05#, TUTA camera will recognize the sensors in number order been added to the camera. For example, if TUTA camera has been added 2 wireless sensors, it can recognize a new sensor with a sensor description of 3 automatically.
When the sensor triggers TUTA camera alarm, TUTA camera will send out
•
SMS alarm message only.
Up to 15 characters can be typed in sensor description.
Set the sensor alarm mode:
• If you add * at front of sensor description, TUTA camera will send out MMS and SMS alarm message.
E.g. #05#*door2# when “door2” sensor triggers TUTA camera alarm,
•
TUTA camera will send out SMS and MMS alarm messages.
Otherwise, if the first character of sensor description without *, TUTA camera will send via SMS only.
E.g. #05#door1# when “door1” sensor triggers TUTA camera alarm, TUTA
•
3.
camera will send out SMS alarm message only.
If the sensor is set “send alarm via SMS only when it alarm” by this command successfully, the user can not use command 81, 82, 83 and 84 to change alarm way of the sensor.
When TUTA camera has received the SMS command, it will emit a “Beep…” tone and the indicator will flash red and green alternately. TUTA camera will
31
4.
5.
6.
TUTA-B2 GSM REMOTE CAMERA USER MANUAL then send a notification message via SMS to the user(s) stating “Waiting to load wireless sensor, make the sensor work immediately.”
The user needs to make the sensor work and transmit signal to be studied by
TUTA camera.
E.g. For a wireless door magnet, open and close the door once to send the signal to the camera.
When TUTA camera receives the sensor signal, it will emit a “Beep…” tone and send a notification message via SMS to the user(s) stating “*** has been successfully loaded”
To exit the loading mode manually, press the set key of the camera, TUTA camera will emit a “Beep…” tone and exit the loading mode.
Failed SMS reply
•
•
•
If TUTA camera failed to load the sensor, the indicator light on TUTA camera will flash red and green alternately for approximately 60 seconds, TUTA camera will revert back to the preset armed/disarmed mode.
When the maximum amount of sensors is already loaded, if a user attempts to load one more sensor onto the camera, TUTA camera will send a SMS message “Sensor list is full. Please delete old sensor at first.”
TUTA camera will emit “Beep, Beep…” tone if the user want to load an existed sensor which has been loaded onto TUTA camera.
4.10.2 Remove wireless sensor
Authority: Master and family users.
Method
The user sends following SMS message in order to:
Remove a wireless sensor: (42)
•
#112#
SensorDescription
#...#
SensorDescription
#
Sensor description should be the existing sensor which the user wants to remove.
Remove all wireless sensors: #112# (43)
Successful SMS reply
Sensor deleted successfully ****
32
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
4.11 Arming or disarming TUTA camera manually
4.11.1 Arming TUTA camera manually
Authority: Master and family users.
Description
•
•
When TUTA camera is arming, all loaded sensors, infrared body detector and motion detector are in work status. TUTA camera will automatically send alarm message or making a phone call once it is triggered.
When the indicator light on the camera slowly flashes green, it shows that the camera is disarmed. Use following methods to arm the camera:
Method
Method 1:
The user sends following SMS message in order to:
Arming TUTA camera manually: #01# (44)
Method 2:
Press on the remote control, whilst pointing it in the direction of TUTA camera. TUTA camera will emit a “Beep” tone, to indicate that arming TUTA camera is successfully.
Method 3:
The user calls TUTA camera and hangs up within 5-20 seconds upon hearing the ring tone in the phone. The camera will be armed or disarmed.
Successful SMS reply
Defense mode activated.
And the indicator light will turn green (no flashing).
4.11.2 Default arming mode
•
In this mode, the infrared light will be on.
• When motion is detected, a notification will be sent via SMS to preset user numbers. Five notification pictures will be sent on one message via MMS.
•
MMS image quality is 320×240(QVGA).
When the integrated infrared body detector and loaded wireless sensor alarms TUTA camera, a notification will be sent via SMS to preset user
33
TUTA-B2 GSM REMOTE CAMERA USER MANUAL numbers. Five notification pictures will be sent on one message via MMS.
MMS image size is 320×240(QVGA).
4.11.3 Disarming TUTA camera manually
Authority: Master and family users.
Description
When TUTA camera is working under disarmed mode, all loaded wireless sensor, integrated infrared body detector and motion detection function could not work.
But it will send an SMS/MMS notification or make phone calls only when button on remote control is pressed.
Method
Method 1:
The user sends following SMS message in order to:
Disarming TUTA camera manually: #02# (45)
Method 2:
• Press the button on the remote control, whilst pointing it in the direction of the camera.
Method 3:
The user calls TUTA camera and hangs up within 5-20 seconds upon hearing the ring tone in the phone. The camera will be armed or disarmed.
Successful SMS reply
Defense mode de-activated.
TUTA camera will emit a “Beep...” tone, and the indicator light will flash green.
4.12 Timed arming the camera
Authority: Master and family users.
4.12.1 Enable timing arms the camera
Method
The user sends following SMS message in order to:
Enable timing arms the camera: #128#1# (46)
34
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Successful SMS reply
Timing defense activated.
Then TUTA camera will arming automatically according to the settings.
4.12.2 Set time period to arm the camera
Method
The user sends following SMS message in order to:
Set time period to arm the camera : (47)
•
#129#
WorkDay
# # #...#
ArmTime3
#
Time3
#
Up to 3 periods be allowed per workday. Each period time should set by
ArmTime, DisarmTime.
• WorkDay: one digit, the values lie in the range of “0” to “8”.
The following table contains the descriptions of each value:
•
Value
0
1
2
3
4
7
8
5
6
Corresponding day
Everyday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Monday to Friday
ArmTime and DisarmTime: Be consists of 4 digits (hh:mm) and works on a
24 hour clock. For example: 0000 means time 00:00(hh:mm), 2359 means time 23:59(hh:mm). The ArmTime and DisarmTime should be in the same day, and the DisarmTime must be later than ArmTime during the same period.
Successful SMS reply
Set timing defense successfully, the parameter is:*****
4.12.3 Disable timing arm the camera
Method
The user sends following SMS message in order to:
Disable timing arm the camera: #128#0# (48)
Successful SMS reply
35
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Timing defense de-activated.
4.13 Auto-disarming the camera
Description
In order to avoid TUTA camera sending out alarm message all the time and out of Master’s attention, TUTA camera can be set auto-disarm when it has been sent out alarms certain times (At least one alarm message should be sent via
MMS). After the user set this function successfully, any alarm of TUTA camera will be counted in alarm times. When the user arms/disarms TUTA camera manually, the counted alarm time will be cleared to 0.
4.13.1 Activate auto-disarming the camera
Authority: Master and family users.
Method
The user sends following SMS message in order to:
Activate auto-disarming the camera: #138#1# (49)
Set the value of alarm times when TUTA camera is auto-disarming: (50)
#139# times #
• The times should be numbers.
Successful SMS reply
•
•
•
Cancel defense after warn some times activate.
Cancel defense after warn ** times.
When the alarm times reach to the times value setting, TUTA camera will be auto-disarmed and send SMS message” The device has been autodisarmed.”
4.13.2 Disable the function of auto-disarming TUTA camera
(default)
Authority: Master and family users.
Method
The user sends following SMS message in order to:
Disable the function of auto-disarming the camera: #138#0# (51)
36
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Successful SMS reply
Cancel defense after warn some times deactive.
4.14 Camera language setting
Authority: Master user.
Description
TUTA camera supports both English and Spanish (or the user’s first language) display.
Method
The user sends following SMS message in order to set:
The user’s first language (or Spanish) version: #127#0# (52)
English version: #127#1# (53)
Successful SMS reply
Set *** version successfully.
4.15 Check status
Authority: Master, family and guest users.
Method
The user sends following SMS message in order to:
Check the present settings and work status of TUTA camera:
•
•
For master and family users: #07# (54)
For guest users: #07#
password
(55)
Successful SMS reply
• TUTA camera will reply via MMS, depending on which status is currently set on. Such as:
Device (dis)armed. (No) SMS notification when alarm is triggered. (No) MMS notification when alarm is triggered. Motion detection (de)activated. Timing send MMS (de)activated.
Image size 160x128/ 320x240/ 640x480. Send image quantity when alarm. Master number. Master email. Family email. Wireless sensor. Emergency number. Language version.
37
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
4.16 Getting help
Authority: Master, family and guest user.
Description
The user can send SMS to TUTA camera in order to get the SMS command list which the command description as well as the codes will be supplied or get the
MMS named “TUTA user manual” on which all the command descriptions as well as the codes will be supplied. The list and the manual’s contents can be view via the user’s mobile phone.
Method
The user sends following SMS message in order to:
Getting normal command list via SMS:
•
•
For master and family users: #09# (56)
For guest users: #09#
password
Getting detailed instruction via MMS:
•
•
For master and family users: #09#1# (58)
For guest users: #09#
password
#1# (59)
4.17 Resetting the camera
Authority: Master user.
Description
•
This function resets all programmed settings to their original values.
• After TUTA camera is reset, it will need to be restarted. The remote control as well as the wireless sensor will also need to be reloaded. Refer to chapter 3.2
•
Define Master user to start the camera.
After resetting the camera. However, if the MMS function does not work, the
MMS parameter will need to be reset. Refer to chapter 4.1 Network parameter settings.
Note
This function needs to be used carefully as it also erases the values for the
master number, the remote control as well as the wireless sensor(s).
Method
38
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Method 1: Reset via the camera
• Switch TUTA camera off. It must remain off for a minimum of 20 seconds.
• Press and hold the Reset button and then switch TUTA camera back on.
•
The indicator light will be green for 2-4 seconds after which it will flash red.
• If the resetting of TUTA camera is successful, a “Beep …” tone will be emitted.
Method 2: Reset via SMS command
The user sends following SMS message to TUTA camera in order to:
Reset the camera: #08#
password
Successful SMS reply
The GSM camera has successfully reset to its default settings.
Chapter 5 Advanced settings
5.1 Image settings
The user sends the following edit message via SMS to TUTA camera in order to configure the following settings:
5.1.1 Image size
•
•
•
•
For master and family users: #32# value
If the value is 1, the image size is 160 ×128(pixels). It’s for a standard small screen mobile phone. The size of one MMS image file is 4K.
If the value is 2, the image size is 320×240(QVGA default). The size of one
MMS image file is 9K.
If the value is 3, the image size is 640 × 480 (VGA). The size of one MMS image file is 33K.
Successful SMS reply
The image size has been reset successfully.
5.1.2 Image quantity
•
•
For master and family users: #33#
quantity
(62)
The default quantity value is 3, with the default image size 320×240 and the
Image capturing interval time 0.5s.
39
•
•
•
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
The quantity value should be in the range of 2-8.
If the image size is 640×480, up to 2 image quantity can be used.
The image size and image capturing interval time can be changed, see chapter 5.1.1 and 5.1.3.
Successful SMS reply
Alarm image quantity has been set successfully.
MMS file name:
• For wireless sensor alarm: Model-Time (Sensor name), such as TUTA-
171154(Sensor 1).
• For motion detection alarm: Model-Time (Motion detection), such as TUTA-
171154 (motion detection).
5.1.3 Image interval
•
•
•
•
For master and family users: #103# time #
The Interval time values should be in the range from 3-10.
Each unit constitutes 100ms.
The default value is 5, i.e. 0.5 seconds.
Successful SMS reply
Capture image interval time has been set successfully: *
5.2 Automatic alarm settings
Description
TUTA camera will enter auto-alarm mode and send notification messages (SMS and/or MMS) to the previously set numbers or e-mail addresses in one of the following two circumstances:
•
•
When motion is detected or when the wireless sensors are triggered.
The user sends the following edit message via SMS to TUTA camera in order to activate the following functions:
5.2.1 Warning tone upon alarm triggering
• For master and family users: #130#1# (64)
40
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Successful SMS reply
Warn sound mode activated.
TUTA camera will emit a “Beep …” tone upon alarm activation.
5.2.2 No warning tone upon alarm (Default)
• For master and family users: #130#0# (65)
Successful SMS reply
Warn sound mode de-activated.
TUTA camera will not emit any tone upon alarm activation.
5.2.3 No SMS notification upon alarm
• For master and family users: #11#0# (66)
Successful SMS reply
No send SMS when alarm
5.2.4 SMS notification upon alarm (Default)
• For master and family users: #11#1# (67)
Successful SMS reply
Set alarm with SMS successfully
5.2.5 No MMS notification upon alarm
• For master and family users: #12#0# (68)
Successful SMS reply
Set alarm without MMS successfully, alarm with SMS only
5.2.6 MMS notification upon alarm (Default)
•
For master and family users: #12#1# (69)
Successful SMS reply
Set alarm with MMS successfully.
41
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
5.2.7 No call notification upon alarm (Default)
• For master and family users: #13#0# (70)
Successful SMS reply
Didn't auto dial calls when alarm.
5.2.8 Call notification upon alarm
•
For master and family users: #13#1# (71)
Successful SMS reply
•
Auto dial calls when alarm.
If TUTA camera alarm automatically, it will dial the master user’s number. Live
• audio stream can be heard upon answering the call.
If the master user does not answer the call, TUTA camera will then dial the
• family user’s numbers in the preset order, until someone answers the call.
The master user’s and the family user’s numbers will be called a maximum three times. If it is still no one answers the call, TUTA camera will then exit
• dialing mode automatically.
If SMS, MMS and calling notification are all activated, when TUTA camera alarm automatically, it will firstly send an SMS, secondly an MMS and thirdly a calling notification to preset users.
5.2.9 No MMS notification to pre-set E-mail address
(Default)
• For master and family users: #110#0# (72)
Successful SMS reply
Alarm didn't send MMS images to email
5.2.10 MMS notification to pre-set E-mail address
• For master and family users: #110#1# (73)
Successful SMS reply
Alarm set with MMS notification to an E-mail address successfully.
42
•
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
If the MMS notifications is set to be send to both a mobile phone number as well as to an e-mail address, the MMS image will firstly be sent to the mobile phone number and then to the E-mail address.
5.3 Turn on/off LED indicator on the camera
Authority: Master, family user.
Description
If the LED indicator is on, it will display in different ways to show the working status. If it turns off, it can make TUTA camera private and avoid to be found easily.
Method
The user sends following SMS message in order to:
Turn off indicator: #143#0# (74)
Turn on indicator: #143#1# (75)
Successful SMS reply
Status LED close.
Status LED open.
5.4 SMS notification upon the power supply changing
Authority: Master and family user.
Method
The user sends following SMS message in order to set:
SMS notification upon the power supply changing (Default): #144#1# (76)
No SMS notification upon the power supply changing: #144#0# (77)
Successful SMS reply
(Not) Send SMS notification when power supply changed.
Chapter 6 Maintenance
• Store and use the remote camera in suitable temperature. Too high or too low temperature will likely to damage the camera.
43
•
•
•
•
•
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Try to keep the TUTA camera and all its accessories dry. Do not store and use it in the bathroom, or other place with high humidity. Do not allow pour water or other liquids into the camera, otherwise, it might cause malfunctions.
Do not store and use the camera in dusty.
Do not use alcohol, acetone and other similar solvents to clean it. Wipe it with soft-wet cloth.
Do not attempt to open it except as instructed. If the camera does not work normally, try to resolve it as the guide of the "general troubleshooting", if to the problem can not be solved, contact with the dealer immediately.
To prolong the life-span of the battery, connect the TUTA camera to the power supply to charge the built-in Lithium battery for 4 hours every 3 months if the camera does not use for long time. Charge the battery at least 12 hours at the first time use to achieve the full performance of the battery.
44
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Chapter 7 General Troubleshooting
No.
General Trouble
1 Can’t start camera
(Indicator is working)
2 All functions disable
(Indicator is working)
3 Indicator constant light in red color.
Possible Reason
Other master is already set in the camera.
Caller ID presentation or MMS functions of the SIM card do not active, insufficient fee of the SIM card.
Can’t find or identify the SIM card.
4 Camera didn’t response of any operation.
5 After starting the camera, indicator flashed in red color and can not turn to green.
TUTA camera work abnormally.
Network signal weak or network busy.
SIM card PIN code actives.
SIM card invalid.
Solution
Recover to factory default setting.
Contact network provider to active SIM card function. Pay for the card.
SIM card no install properly:
Power off the camera and check it again.
Switch off the power, check
SIM card, or reset factory setting.
Place the camera at other place with strong signal and try again.
Close the PIN code.
6 Remote control can’t work. Or action slowly.
Or control distance range shortened.
Camera low power.
Remote control low power.
Two remote control work simultaneously.
Contact with local operator to check of it.
Connect external power to recharge the battery.
Change remote control battery.
Try only one remote control.
7 Can’t add new remote control or wireless sensor
8 Can’t start the camera after long time supply with the battery.
The remote control or sensor already studies successfully.
The sensor quantity is already reaches its max number.
Didn’t set master user number
Battery runs out of power.
Exit the loading status.
Delete old sensors before add new sensor.
Set master number before add sensor.
Connect the camera to external AC power and charge for at least one hour, then, restart camera.
Note: If the problem can’t be solved with above guidelines, contact to your local distributor or after service center.
Chapter 8 Main technical parameters
Power adaptor Input: 100V~240V/50Hz Output: 5.5V DC
Operating temperature -10
℃~+45℃
Store temperature -20
℃~+60℃
Relative humidity 10-90%,without condensation
Working band EGSM900,DCS1800 (GSM850,PCS1900 Optional)
Communication protocols GSM PHASE 2/2+ (including data operation)
45
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Wireless sensor receiving code ASK
Wireless sensor receiving band 433MHz
Max. wireless sensors 15 units
Remote control receiving band 433MHz
Effective distant of the remote control 10 meters (wide area)
Image format JPEG
Image resolution 160×128,QVGA320×240,VGA640×480
Camera pixel 300K pixel
Camera Shooting angel 68 degree
Best shooting distance at night ≤8 meters
Detect distance of build-in PIR sensor ≤9 meters
Listen in distance ≤6 meters
Lithium battery (Inner) 800mAh
Battery standby time 12 hours(Affected by network)
Appendix: SMS commands list
Category Function Command
Define the user
Network parameter settings
Add a master number to the camera
Change the master user’s number
Change the password
(1) #00#
(2) #14# NewMasterNumber
(3) #04# oldpassword #
#
#
Add a family number
Add several family numbers
(4) #06#
(5) #06#
FamilyNumber #
#...# FamilyNumber #
Delete a family number
Delete several family numbers simultaneously
Delete all family numbers
Add single emergency number on the camera
(6) #113#
(7) #113#
FamilyNumber
FamilyNumber
#
#…# FamilyNumber #
(8) #113#
(9) #106# EmergencyNumber #
Add several emergency numbers on the camera
Delete an emergency number
Delete several emergency numbers
Delete all emergency numbers
Set MMS center
Set APN parameters
Remove the operative network parameters and then auto-choose new parameters from memory
Check the operative network parameter settings
(10)#106# EmergencyNumber
(11) #107#
#
#…
EmergencyNumber #
(12)#107#
#
EmergencyNumber
(13) #107#
(14) #124#MMScenter#
(17) #55#
EmergencyNumber #
#…
(15)#125#GatewayIP#WAPGatewayPort#HTT
PGatewayPort#APN#APNusername#APNpass word#
(16) #54#
46
Master
Master
User
Master
Master
Master
Master
Master
Master
Master
Master
Master
Master
Master
Master
Master
Master
Master
Category
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Function Command
capture images
E-mail settings
Timed imaging
Remote control
Emergency alarm
Capture one image and send to the user mobile
(18) #03#
Capture more than one image and send to the user mobile
Capture image(s) and send back to user’s pre-set E-mail address
(19) #03#
(20) #03#
(21) #03#
(22) #03#
password #
Password #
ImageQuantity
#
#1#
Capture image(s) and send to appointed mobile or Email address
Add/modify an E-mail address
Delete all E-mail address
Enable timing sends MMS images
Set time period to auto-send
MMS image
(23) #30#
(24)#30# Password #
antity
#
NumberOrEmail
(25) #108#
(26) #109#
EmailAddress
(27) #115#1#
#
#
(28)#116# WorkDay
ervelTime1
#
#...#
StartTime3
#
Time3
#
(29) #115#0# Disable timing send MMS image
No SMS notification message upon arming or disarming TUTA camera via remote control
Send SMS notification message upon arming or disarming TUTA camera via remote control
Remove all remote controls from the camera
(30) #137#0#
(31) #137#1#
(32) #111#
Emergency Mode1( to dial) (33) #39#0# infrared body detector
Motion detection
Emergency Mode2( to send
SMS and MMS message)
Activate infrared body detector (default)
Deactivate infrared body detector
Deactivate motion detection(default)
Activate motion detection
(34) #39#1#
(35) #118#1#
(36) #118#0#
(37) #22#0#
(38) #22#1# wireless sensor
#
#
#
#
#
Send five images upon motion detection alarm
Cancel send five images of motion detection alarm
Make TUTA camera enter loading mode and set corresponding alarm mode
Remove a wireless sensor
(39) #142#1#
(40) #142#0#
(41) #05# SensorDescription #
(42)#112# SensorDescription #...# SensorDescri
ption
#
Remove all wireless sensors (43) #112#
Arming or disarming
TUTA
Arming TUTA camera manually
Disarming TUTA camera
(44) #01#
(45) #02#
47
Master
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
User
Master
Family
Guest
Master
Family
Guest
Master
Family
Master
Family
Guest
Master
Family
Master
Master
Master
Category
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Function Command
camera manually
Enable timing arms the camera
Set time period to arm the camera
Disable timing arm the camera
Activate auto-disarming the camera
Set the value of alarm times when TUTA camera is autodisarming
Disable the function of autodisarming the camera language setting
Check status
The user’s first language (or
Spanish) version
English version
Check the present settings and work status of the camera
Getting help Getting normal command list via SMS
Reset
Image settings
Getting detailed instruction via MMS
Reset the camera
Image size
(46) #128#1#
(47)#129# WorkDay
...#ArmTime3
(48) #128#0#
(49) #138#1#
(50) #139# times #
(51) #138#0#
(52) #127#0#
(53) #127#1#
(54) #07#
#
#Disarm
(55) #07# password #
(56) #09#
(57) #09# password #
(58) #09#1#
Time3#
(59) #09# password #1#
(60) #08#
(61) #32#
password
value
#
#
Image quantity (62) #33# quantity #
Image interval (63) #103# time #
Automatic alarm settings
Warning tone upon alarm triggering
No warning tone upon alarm
(Default)
No SMS notification upon alarm
SMS notification upon alarm
(Default)
No MMS notification upon alarm
MMS notification upon alarm
(Default)
(64) #130#1#
(65) #130#0#
(66) #11#0#
(67) #11#1#
(68) #12#0#
(69) #12#1#
No call notification upon alarm (Default)
(70) #13#0#
Call notification upon alarm (71) #13#1#
Lights
No MMS notification to preset E-mail address (Default)
MMS notification to pre-set
E-mail address
Turn off indicator
Turn on indicator
(72) #110#0#
(73) #110#1#
(74) #143#0#
(75) #143#1#
SMS notification
SMS notification upon the power supply changing
(76) #144#1#
48
User
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Master
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Master
Family
Guest
Master
Family
Guest
Master
Family
Guest
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Master
Family
Category
TUTA-B2 GSM REMOTE CAMERA USER MANUAL
Function
and reply (Default)
No SMS notification upon the power supply changing
(77) #144#0#
Command User
Master
Family
Xiamen Youthnet Co., Ltd.
Add: 10F, No.56 Guanri road, Software park II, Xiamen, Fujian, China. 361009 http://www.i-tuta.com.
TEL: +86-592-6300656
FAX: +86-592-6022220
49
advertisement
Key Features
- Remote control via SMS
- Image capture and MMS/email sending
- Motion detection alarm
- Infrared body detector
- Wireless sensor integration
- Built-in battery
- Live audio listening
- Easy installation
- High-quality camera