USER'S MANUAL - Icon Heath & Fitness

USER'S MANUAL - Icon Heath & Fitness
Model No. NTEVEX78612.0
Serial No.
USER’S MANUAL
Write the serial number in the space
above for reference.
Serial Number Decal
(under frame)
CUSTOMER SERVICE
UNITED KINGDOM
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
CASTLEFORD
WF10 5QJ
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: [email protected]
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
www.iconeurope.com
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
THE CHEST HEART RATE MONITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
HOW TO USE THE EXERCISE BIKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
MAINTENANCE AND TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
RECYCLING INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning decal(s).
If a decal is missing or illegible, see the front cover
of this manual and request a free replacement decal.
Apply the decal in the location shown. Note: The
decal(s) may not be shown at actual size.
NORDICTRACK is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise bike before using your exercise bike.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
8. Keep children under age 12 and pets away
from the exercise bike at all times.
1. It is the responsibility of the owner to ensure
that all users of the exercise bike are adequately informed of all precautions.
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exercise bike. Always wear
athletic shoes for foot protection.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
10.The exercise bike should not be used by
persons weighing more than 286 lbs.
(130 kg).
3. Use the exercise bike only as described in
this manual.
11.Be careful when mounting and dismounting
the exercise bike.
4. The exercise bike is intended for home use
only. Do not use the exercise bike in a commercial, rental, or institutional setting.
12.The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
5. Keep the exercise bike indoors, away from
moisture and dust. Do not put the exercise
bike in a garage or covered patio, or near
water.
6. Place the exercise bike on a level surface
with at least 2 ft. (0.6 m) of clearance around
the exercise bike. To protect the floor or
carpet from damage, place a mat under the
exercise bike.
13.Always keep your back straight while using
the exercise bike; do not arch your back.
14.Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
3
BEFORE YOU BEGIN
Thank you for selecting the revolutionary
NORDICTRACK® GX 3.4 exercise bike. Cycling is an
effective exercise for increasing cardiovascular fitness,
building endurance, and toning the body. The GX 3.4
exercise bike provides an impressive selection of features designed to make your workouts at home more
effective and enjoyable.
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
you use the exercise bike. If you have questions after
Length:3 ft. 5 in. (104 cm)
Width: 1 ft. 11 in. (58 cm)
Console
Handlebar
Heart Rate Monitor
Adjustment Knob
Seat
Seat Adjustment Knob
Seat Post Knob
Seat Post
Pedal/Strap
Wheel
Leveling Knob
Leveling Foot
4
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the Part List near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been
preattached.
M8 Locknut
(72)–4
M8 Split
Washer (75)–8
M8 Washer
(43)–2
M8 x 20mm
Screw (74)–4
M4 x 5mm
Bright Screw
(91)–1
M10 x 95mm
Screw (76)–4
M6 x 70mm Bolt Set (50)–1
M6 x 60mm Bolt Set (51)–1
5
M4 x 16mm
Screw (90)–8
ASSEMBLY
• Assembly requires two persons.
• In addition to the included tool(s), assembly
requires the following tools:
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
one Phillips screwdriver
one adjustable wrench
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
• To identify small parts, see page 5.
1. G
o to www.iconsupport.eu on your computer
and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Service
• allows us to notify you of upgrades and offers
1
Note: If you do not have Internet access, call
Customer Service (see the front cover of this
manual) and register your product.
2. Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 95mm Screws (76).
2
3
1
76
6
3. Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 95mm Screws (76).
3
2
1
4. Loosen the Adjustment Knob (27) in the Frame
(1) a few turns.
4
Orient the Seat Post (6) as shown. Then, pull
the Adjustment Knob (27) outward and insert the
Seat Post into the Frame (1).
6
Slide the Seat Post (6) upward or downward to
the desired position, and release the Adjustment
Knob (27).
Adjustment
Holes
1
Move the Seat Post (6) upward or downward
slightly to make sure that the Adjustment
Knob (27) is engaged in one of the adjustment holes in the Seat Post. Then, tighten the
Adjustment Knob.
7
27
76
5. Orient the Seat (23) and the Seat Carriage (24)
as shown.
5
23
Attach the Seat (23) to the Seat Carriage (24)
with four M8 Locknuts (72) and four M8 Split
Washers (75).
91
Slide the Seat Carriage (24) onto the Seat
Post (6). Then, slide the Seat Carriage all the
way forward and tighten the Seat Adjustment
Knob (26).
24
Attach an M4 x 5mm Bright Screw (91) to the
rear of the Seat Post (6).
6
26
75
72
6. Using a plastic bag to keep your fingers clean,
apply some of the included grease to an M6 x
70mm Bolt Set (50).
6
Orient the Handlebar (5) and the Upright (4) as
shown.
50
While a second person holds the Handlebar (5)
near the Upright (4), insert the Upper Wire (59)
upward through the Handlebar.
Grease
Tip: Avoid pinching the Upper Wire (59).
Attach the Handlebar (5) to the Upright (4)
with the M6 x 70mm Bolt Set (50) and two M8
Washers (43).
59
43
5
51
43
4
Then, attach an M6 x 60mm Bolt Set (51)
through the lower bracket on the Handlebar (5).
Avoid pinching the
Upper Wire (59)
8
51
50
7. While another person holds the Console (13)
near the Handlebar (5), connect the wires on the
Console to the Upper Wire (59), the Pulse Wire
(61), and the Receiver Wire (16).
Insert the excess wire into the Handlebar (5).
Tip: Avoid pinching the wires. Attach the
Console (13) to the Handlebar (5) with four M4 x
16mm Screws (90).
7
13
Avoid pinching
the wires
59
5
61
16
90
8. Orient the Upright (4) assembly and the Pivot
Cover (12) as shown.
Slide the Pivot Cover (12) upward to the
Handlebar (5). Tip: Bend and flex the Pivot
Cover slightly to slide it over the Handlebar.
Attach the Pivot Cover (12) to the Handlebar
(5) and the Console (13) with four M4 x 16mm
Screws (90).
8
13
5
Hole
Pivot the Handlebar (5) until the hole in the
Handlebar is aligned with an adjustment hole in
the Upright (4).
Adjustment
Holes
Tighten an Adjustment Knob (27) into the
Handlebar (5) and an adjustment hole in the
Upright (4). Make sure that the Adjustment
Knob is engaged in one of the adjustment
holes.
12
90
90
27
4
9
90
9. Slide the Front Shield Cover (7) upward onto the
Upright (4).
While another person holds the Upright (4) near
the Frame (1), connect the Upper Wire (59) to
the Lower Wire (58).
Insert the Upright (4) into the Frame (1).
Tip: Avoid pinching the wires. Attach the
Upright (4) with four M8 x 20mm Screws (74)
and four M8 Split Washers (75).
Slide the Front Shield Cover (7) downward to the
Frame (1) and press it into place.
9
Avoid pinching
the wires
4
7
59
75 1
74
58
75
74
75
10.Identify the Right Pedal (21).
Using an adjustable wrench, firmly tighten the
Right Pedal (21) clockwise into the Right Crank
Arm (19).
Tighten the Left Pedal (not shown) counterclockwise into the Left Crank Arm (not shown).
Adjust the strap on the Right Pedal (21) to the
desired position, and press the ends of the
straps onto the tabs on the Right Pedal.
Adjust the strap on the Left Pedal (not
shown) in the same way.
10
19
Strap
21
Tab
10
11.Plug the Power Adapter (67) into the receptacle
on the frame of the exercise bike.
If necessary, plug the Power Adapter (67) into
the Plug Adapter (B).
Note: To plug the Power Adapter (67) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 13.
11
B
67
12.After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Note: Some hardware may be left over after assembly is completed. Place a mat under the exercise bike
to protect the floor or carpet.
11
THE CHEST HEART RATE MONITOR
HOW TO PUT ON THE HEART RATE MONITOR
The heart rate
monitor consists of
a chest strap and a
sensor. Insert the
tab on one end of
the chest strap into
the hole in one end
of the sensor as
shown. Then, press
the end of the sensor under the buckle
on the chest strap.
The tab should be
flush with the front of
the sensor.
Tabs
• Do not expose the heart rate monitor to direct sunlight for extended periods of time; do not expose it to
temperatures above 122° F (50° C) or below 14° F
(-10° C).
Chest
Strap
• Do not excessively bend or stretch the sensor when
using or storing the heart rate monitor.
Sensor
• To clean the sensor, use a damp cloth and a small
amount of mild soap. Then, wipe the sensor with a
damp cloth and thoroughly dry it with a soft towel.
Never use alcohol, abrasives, or chemicals to clean
the sensor. Hand wash and air dry the chest strap.
TROUBLESHOOTING
Tab
If the heart rate monitor does not function properly, try
the steps below.
Sensor Buckle
The heart rate monitor must be worn
under your clothes,
tight against your
skin. Wrap the heart
rate monitor around
your chest in the
location shown.
Make sure that
the logo is rightside-up. Then, attach the other end of the chest strap
to the sensor. Adjust the length of the chest strap, if
necessary.
• Make sure that you are wearing the heart rate monitor as described at the left. If the heart rate monitor
does not function when positioned as described,
move it slightly lower or higher on your chest.
• If heart rate readings are not displayed until you
begin perspiring, rewet the electrode areas.
• For the console to display heart rate readings, you
must be within arm’s length of the console.
• If there is a battery cover on the back of the sensor,
replace the battery with a new battery of the same
type.
Pull the sensor away from your body a few inches and
locate the two electrode areas, which are covered by
shallow ridges. Using saline solution such as saliva or
contact lens solution, wet the electrode areas. Then,
return the sensor to a position against your chest.
• The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical conditions such as premature ventricular contractions
(pvcs), tachycardia bursts, and arrhythmia.
CARE AND MAINTENANCE
• The operation of the heart rate monitor can be
affected by magnetic interference from high power
lines or other sources. If you suspect that magnetic
interference is causing a problem, try relocating the
fitness equipment.
• Thoroughly dry the sensor with a soft towel after
each use. Moisture may keep the sensor activated,
shortening the life of the battery.
• Store the heart rate monitor in a warm, dry place. Do
not store the heart rate monitor in a plastic bag or
other container that may trap moisture.
12
HOW TO USE THE EXERCISE BIKE
HOW TO PLUG IN THE POWER ADAPTER
HOW TO ADJUST THE HEIGHT OF THE SEAT
IMPORTANT: If the exercise bike has been exposed
to cold temperatures, allow it to warm to room
temperature before you plug in the power adapter.
If you do not do this, you may damage the console
displays or other electronic components.
For effective exercise, the seat should be at the proper
height. As you pedal, there should be a slight bend in
your knees when the pedals are in the lowest position.
Plug the power
adapter into the
receptacle on
the frame of the
exercise bike.
Next, plug the
power adapter into
the plug adapter.
Then, plug the
plug adapter
into an appropriPower Adapter
ate outlet that is
properly installed
in accordance with
all local codes and ordinances.
To adjust the seat,
first loosen the
adjustment knob
a few turns. Next,
pull the knob
outward, slide the
seat post upward
Holes
or downward to
the desired posiKnob
tion, and then
Seat
release the knob.
Post
Move the seat
post upward
or downward
slightly to make
sure that the
knob is engaged
in one of the
adjustment holes in the seat post. Then, tighten the
knob.
Plug
Adapter
HOW TO LEVEL THE EXERCISE BIKE
If the exercise
bike rocks slightly
on your floor
during use, turn
one or both of the
leveling knobs on
the rear stabilizer
and adjust the
leveling feet until
the rocking motion
is eliminated.
HOW TO ADJUST THE HORIZONTAL POSITION OF
THE SEAT
To adjust the
horizontal position of the seat,
first loosen the
seat adjustment
knob a few turns.
Then, move the
seat forward or
backward to the
desired position,
and firmly tighten
the knob.
Leveling
Knobs
13
Seat Knob
Seat Post
HOW TO ADJUST THE ANGLE OF THE
HANDLEBAR
HOW TO ADJUST THE PEDAL STRAPS
To adjust the
pedal straps, first
pull the ends of
the straps off the
tabs on the pedals. Then, adjust
the straps to the
desired position,
and press the
ends of the straps
onto the tabs.
To adjust the angle of the handlebar, first loosen the
adjustment knob a few turns. Next, pull the knob outward, pivot the handlebar to the desired angle, and
then release the knob into an adjustment hole. Make
sure that the knob is engaged in one of the adjustment holes. Then, tighten the knob.
Handlebar
Knob
Holes
14
Strap
Tab
CONSOLE DIAGRAM
MAKE YOUR FITNESS GOALS A REALITY WITH
IFIT.COM
With your new iFit-compatible fitness equipment, you
can use an array of features on iFit.com to make your
fitness goals a reality:
Exercise anywhere in the world with
customizable Google Maps.
Download training workouts designed to
help you reach your personal goals.
Measure your progress by competing
against other users in the iFit community.
Upload your workout results to the iFit
cloud and track your accomplishments.
Set calorie, time, or distance goals for your
workouts.
Choose and download sets of weight-loss
workouts.
Go to iFit.com to learn more.
Carbon
EBNE78612
ELNE99812
NTEVEX78612
NTEVEL99812
15
FEATURES OF THE CONSOLE
The console also features an iFit mode that enables
the console to communicate with your wireless network
through an optional iFit module. With the iFit mode,
you can download personalized workouts, create your
own workouts, track your workout results, race against
other iFit users, and access many other features.
To purchase an iFit module at any time, go to
www.iFit.com or call the telephone number on the
front cover of this manual.
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
When you use the manual mode of the console, you
can change the resistance of the pedals with the touch
of a button. While you exercise, the console will display
continuous exercise feedback. You can also measure
your heart rate using the handgrip heart rate monitor or
the chest heart rate monitor.
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
The console offers twenty onboard workouts—ten
calorie workouts and ten performance workouts. Each
workout automatically changes the resistance of the
pedals as it guides you through an effective workout.
You can also set a calories, distance, or time goal.
To use the manual mode, see page 17. To use
an onboard workout, see page 19. To use a
set-a-goal workout, see page 20. To use a watts
workout, see page 21. To use an iFit workout,
see page 22. To use the sound system, see page
23. To change console settings, see page 24.
The console also offers three watts workouts that
change the resistance of the pedals to keep your
power output near a watts goal.
Note: If there is a sheet of plastic on the display,
remove the plastic.
16
Calories per Hour (Cals./Hr)—This display mode
will show the approximate number of calories you
are burning per hour.
HOW TO USE THE MANUAL MODE
1.Begin pedaling or press any button on the
console to turn on the console.
Distance (Dist.)—This display mode will show
the distance that you have pedaled in miles or
kilometers.
When you turn on the console, the display will turn
on. The console will then be ready for use.
Pulse—This display mode will show your heart rate
when you use the handgrip heart rate monitor or
the chest heart rate monitor (see step 5).
2. Select the manual mode.
Press the Manual button on the console to select
the manual mode.
If a wireless iFit module is not inserted into the console and connected to iFit, the manual mode will be
selected automatically.
Resistance (Resist.)—This display mode will
show the resistance level of the pedals for a few
seconds each time the resistance level changes.
Speed—This display mode will show your pedaling
speed in miles per hour or kilometers per hour.
3. Change the resistance of the pedals as desired.
Time—When the manual mode is selected, this
display mode will show the elapsed time. When a
workout is selected, this display mode will show the
time remaining in the workout.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons.
Note: After you press a button, it will take a
moment for the pedals to reach the selected resistance level.
Watts—This display mode will show your power
output in watts.
4. Follow your progress with the display.
The matrix offers several display tabs. Press the
Display button until the desired tab is shown. You
can also press the increase and decrease buttons
next to the Enter button.
The display can show the following workout
information:
Speed—This tab will show a profile of the speed
settings of the workout. A new segment will appear
at the end of each minute.
My Trail—This tab will show a track that represents
1/4 mile (400 m). As you exercise, the flashing
rectangle will show your progress. The My Trail tab
will also show the number of laps you complete.
Calorie—This tab will show the approximate
amount of calories you have burned. The height of
each segment represents the amount of calories
burned during that segment.
Calories (Cals.)—This display mode will show the
approximate number of calories you have burned.
17
If there are
sheets of plastic on the metal
contacts on the
handgrip heart
rate monitor,
remove the plastic. To measure
Contacts
your heart rate,
hold the handgrip
heart rate monitor
with your palms resting against the contacts. Avoid
moving your hands or gripping the contacts
tightly.
As you exercise, the workout intensity level bar
will indicate the approximate intensity level of your
exercise.
Press the Home button to return to the default
menu (see HOW TO CHANGE CONSOLE
SETTINGS on page 24 to set the default menu).
If necessary, press the Home button again.
When a wireless iFit module is
connected, the wireless symbol at the top of the display will
show the strength of your wireless signal. Four arcs indicate
full signal strength.
When your pulse is detected, your heart rate will
be shown in the display. For the most accurate
heart rate reading, hold the contacts for at least 15
seconds.
If the display does not show your heart rate, make
sure that your hands are positioned as described.
Be careful not to move your hands excessively or
to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never
use alcohol, abrasives, or chemicals to clean
the contacts.
To exit the manual mode or a workout, press the
Home button. If necessary, press the Home button
again.
Change the volume level of
the console by pressing the
volume increase and decrease
buttons.
6.When you are finished exercising, the console
will turn off automatically.
5. Measure your heart rate if desired.
If the pedals do not move for several seconds, a
tone will sound, the console will pause, and the
time will flash in the display. To resume your workout, simply resume pedaling.
o use the included chest heart rate monitor, see
T
page 12. To use the handgrip heart rate monitor, follow the instructions below. IMPORTANT: If
you use both heart rate monitors at the same
time, the console will not display your heart
rate accurately.
If the pedals do not move for several minutes and
the buttons are not pressed, the console will turn
off and the display will be reset.
18
HOW TO USE AN ONBOARD WORKOUT
resistance level and/or target speed is programmed
for the next segment, the resistance level and/or
target speed will appear in the display for a few
seconds to alert you. The resistance of the pedals
will then change.
1.Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
As you exercise, you will be prompted to keep your
pedaling speed near the target speed for the current segment. When an upward-pointing arrow
appears in the display, increase your speed.
When a downward-pointing arrow appears,
decrease your speed. When no arrow appears,
maintain your current speed.
2. Select an onboard workout.
To select an onboard workout, press the 10 Calorie
button or the 10 Perform. button repeatedly until
the desired workout appears in the display.
IMPORTANT: The target speed is intended only
to provide motivation. Your actual pedaling
speed may be slower than the target speed.
Make sure to pedal at a speed that is comfortable for you.
When you select an onboard workout, the display
will show the duration of the workout and the name
of the workout. A profile of the speed settings of the
workout will appear in the matrix.
The maximum resistance level and the maximum
speed for the workout will also appear in the
display.
If the resistance level for the current segment is
too high or too low, you can manually override
the setting by pressing the Resistance buttons.
IMPORTANT: When the current segment of the
workout ends, the pedals will automatically
adjust to the resistance level programmed for
the next segment.
3. Begin pedaling to start the workout.
Each workout is divided into one-minute segments. One resistance level and one target speed
is programmed for each segment. Note: The same
resistance level and/or target speed may be programmed for consecutive segments.
The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. The time will flash in the display. To
resume the workout, simply resume pedaling.
During
the workout, the
profile on
the speed
tab will
Profile
show your
progress.
The flashing segment of the profile represents the
current segment of the workout. The height of the
flashing segment indicates the target speed for the
current segment.
4. Follow your progress with the display.
See step 4 on page 17.
5. Measure your heart rate if desired.
See step 5 on page 18.
6.When you are finished exercising, the console
will turn off automatically.
At the end of each segment of the workout, a
series of tones will sound and the next segment
of the profile will begin to flash. If a different
19
See step 6 on page 18.
Make sure to pedal at a speed that is comfortable for you.
HOW TO USE A SET-A-GOAL WORKOUT
1.Begin pedaling or press any button on the
console to turn on the console.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories that
you burn will depend on various factors such
as your weight. In addition, if you manually
change the resistance during the workout, the
number of calories you burn will be affected.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Set a calories, distance, or time goal.
To set a calories, distance, or time goal, first press
the Set A Goal button.
The workout will continue in this way until the calories, distance, or time goal is reached. To stop the
workout at any time, stop pedaling. The time will
flash in the display. To resume the workout, simply
resume pedaling.
Next, press the increase and decrease buttons
next to the Enter button until the name of the
desired goal appears in the display. Then, press
the Enter button.
4. Follow your progress with the display.
Then, press the increase and decrease buttons
next to the Enter button to set the desired goal.
See step 4 on page 17.
3. Begin pedaling to start the workout.
5. Measure your heart rate if desired.
As you exercise, a target speed may appear in
the display to help you reach your goal. Keep
your pedaling speed near the target speed.
IMPORTANT: The target speed is intended only
to provide motivation. Your actual pedaling
speed may be slower than the target speed.
See step 5 on page 18.
6.When you are finished exercising, the console
will turn off automatically.
20
See step 6 on page 18.
HOW TO USE A WATTS WORKOUT
Watts workout 2 or 3 is divided into one-minute
segments. One resistance level and one watts
goal are programmed for each segment. Note: The
same resistance level and/or watts goal may be
programmed for consecutive segments.
1.Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
The workout profile will show your progress. The
flashing segment of the profile represents the current segment of the workout. The height of the
flashing segment indicates the resistance level for
the current segment.
2.
Select a watts workout.
To select a watts workout, first press the 3 Watts
button repeatedly until the desired workout
appears in the display.
If you select watts workout 1, the words SET
WATT GOAL will appear in the display.
If you select watts workout 2 or 3, the workout
time and a profile for the workout will appear in the
display.
As you exercise, pedal at the appropriate speed to
keep your watts output near the watts goal for the
segment.
When the first segment of the workout ends, the
resistance level and the watts goal for the second
segment will appear in the display for a few seconds to alert you. The next segment of the profile
will begin to flash, and the pedals will automatically
adjust to the resistance level for the next segment.
3.If you selected watts workout 1, enter a watts
goal setting.
4.Begin pedaling to start the workout.
If the resistance level for the current segment is
too high or too low, you can manually override
the setting by pressing the Resistance buttons.
IMPORTANT: When the current segment of the
workout ends, the pedals will automatically
adjust to the resistance level programmed for
the next segment.
Watts workout 1 is divided into one-minute
segments. During the workout, the console will
regularly compare your watts output to the watts
goal you entered for the workout.
The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. The time will flash in the display. To
resume the workout, simply resume pedaling.
If your watts output is too far below or above
the watts goal, the resistance of the pedals will
automatically increase or decrease to bring your
watts output closer to the watts goal. Each time
the resistance changes, the resistance level will
appear in the display for a few seconds to alert
you.
5. Follow your progress with the display.
If the watts goal is too high or too low, you can
manually override the setting by pressing the
increase and decrease buttons next to the Enter
button.
7.When you are finished exercising, the console
will turn off automatically.
During watts workout 1, the same watts goal will
be programmed for all segments of the workout.
Press the increase and decrease buttons next to
the Enter button to enter the desired watts goal.
See step 4 on page 17.
6. Measure your heart rate if desired.
21
See step 5 on page 18.
See step 6 on page 18.
HOW TO USE AN IFIT WORKOUT
4. Select an iFit workout.
You must have an iFit module to use an iFit workout.
To download an iFit workout in your schedule,
press the Map, Train, or Lose Wt. button to download the next workout of that type in your schedule.
To download the next workout in your schedule,
press the iFit button. Note: You may be able to
access demo workouts through these options, even
if you do not insert an iFit module.
To purchase an iFit module at any time, go to
www.iFit.com or call the telephone
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement