Lumiax Max-MPPT 1010, 1510, 2010 Solar charge controller User Manual

The Max-MPPT 1010, Max-MPPT 1510, Max-MPPT 2010 are solar charge controllers designed for use in off-grid solar systems. This user manual will guide you through the installation, operation, and maintenance of these controllers.

PDF Download
Document
Lumiax Max-MPPT 1010, 1510, 2010 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • MPPT technology for maximum efficiency
  • 12V/24V automatic recognition
  • Multiple battery type compatibility
  • Four-stage charging process
  • Electronic protection features
  • Clear display for monitoring
  • Easy installation and setup

Frequently asked questions

The maximum input voltage for all three models is 100V DC.

These controllers support both Liquid and Gel batteries. However, the default setting is for Liquid batteries, and you can adjust it using the DIP switch.

The work mode can be selected between Standard and D2D (Dusk to Dawn). The default setting is Standard, which controls the load based on sunlight. You can switch to D2D mode using the DIP switch, where the controller will control the load from dusk to dawn.
Preparing document for printing…
0%