Konica Minolta bizhub 25e User manual
Konica Minolta bizhub 25e is a versatile copier that provides high-quality copies with ease. It features basic copy functions like adjusting copy quantity (up to 99 copies) and selecting paper type and size. For more complex tasks, it offers advanced functions such as sorting, duplex copying, combining multiple documents into one copy, and scanning documents to a USB drive. This copier is a valuable tool for small offices and home businesses with moderate printing and copying needs.
advertisement
Konica Minolta
Business Solutions Europe GmbH
Europaallee 17
30855 Langenhagen Germany
Tel.: +49 (0) 511 74 04-0
Fax: +49 (0) 511 74 10 50 www.konicaminolta.eu
© 2012 Konica Minolta
Business Solutions Europe GmbH
All rights reserved Printed in Germany
*9961065400*
*9961065400*
bizhub 25e
USER’S GUIDE
Copier
Table of contents
1 Introduction
2 Basic copy functions
3 Advanced copy functions
4 Device settings
bizhub 25e Contents-1
Contents-2 bizhub 25e
1
1.1
How to read this manual
1 Introduction
1.1
1.1.1
How to read this manual
Symbols
In this manual, the following symbols are used with the items where important operational and safety information must be observed.
1.1.2
Symbol
7 WARNING
7 CAUTION d
Meaning
Describes warnings to protect yourself and others from serious or potentially fatal injury if you handle the machine incorrectly. For safe operation, please follow instructions carefully.
Notes a caution to protect yourself and others from personal injury or damage to properties if you handle the machine incorrectly. For safe operation, please follow instructions carefully.
Describes reference information and additional notes for operation.
Key descriptions
In this manual, the operating keys are described as follows:
1.1.3
< > : Keys on the control panel
For example, the start key % <Start>
[ ] : Buttons on the display and computer
For example, the "Setting" button % [Setting]
Descriptions for paper and documents
v symbol : This shows that paper should be set with the shorter side positioned at the top.
1
symbol : This shows that the document should be set with the shorter side positioned at the top.
bizhub 25e 1-3
1
1.1.4
How to read this manual 1.1
Screens
This manual uses the screens of the bizhub 25e standard model, unless otherwise stated. The screens you see may differ, depending on the options installed.
1-4 bizhub 25e
2
2.1
Precaution 2
2
Basic copy functions
2.1
2.1.1
Precaution
Legal restrictions on copying
Certain types of documents must not be copied with the purpose or intent to pass copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to responsible copying.
Financial instruments
-
-
-
-
-
-
Personal checks
Travelers checks
Money orders
Certificates of deposit
Bonds or other certificates of indebtedness
Stock certificates
Legal documents
-
-
-
-
-
-
-
-
Food stamps
Postage stamps (canceled or uncanceled)
Checks or drafts drawn by government agencies
Internal revenue stamps (canceled or uncanceled)
Passports
Immigration papers
Motor vehicle licenses and titles
House and property titles and deeds
General
-
-
-
Identification cards, badges, or insignias
Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art, without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel.
2.1.2
In case the machine runs out of memory
-
-
In case the machine runs out of memory while scanning documents, the following message will be displayed:
-
Press [Yes] to copy the scanned document.
Press [No] to cancel copying. Change the settings, or wait until the machine has enough memory free.
When the automatic reset time (three minutes at default) passes while neither of the button is pressed, the copy job will be canceled. You can change the automatic reset time of the machine. For details, see chapter 2 in the Administrator’s Guide.
bizhub 25e 2-3
2
2.2
2.2.1
Basic copying
Making copies
This section describes the often-used basic procedure for making copies.
1
Load the document.
Basic copying 2.2
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
% Set the document type, as necessary. For details, see
3
Enter the number of copies using the numeric keys.
% You can set 1 to 99 copies.
4
Press <Start>.
% To cancel copying, press <Stop>.
% When all the documents are scanned and --Copy Reserve Ready-- is displayed, you can load the next document and start scanning.
2-4 bizhub 25e
2.2
2.2.2
Basic copying
Selecting the paper to copy
At default, the paper size is set to "Auto", and paper is automatically selected according to the document size. However you can select the paper manually from the cassettes or bypass tray.
2
Selecting paper in the cassette
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
% Set the document type, as necessary. For details, see page 2-8.
3
Select the cassette containing the paper you want to use for copying.
% In this display sample, the optional paper supply units are installed.
4
Enter the number of copies using the numeric keys.
% You can set 1 to 99 copies.
5
Press <Start>.
bizhub 25e 2-5
2
Selecting paper in the bypass tray
1
Load paper into the bypass tray.
% For details, see the Quick Guide.
Basic copying 2.2
2
Load the document.
2-6
3
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
% Set the document type, as necessary. For details, see page 2-8.
4
Select the bypass tray.
% When the correct paper size is displayed at "Bypass", proceed to step 9.
5
Press [Advanced].
bizhub 25e
2.2
Basic copying
6
Press [Bypass].
7
Select paper loaded into the bypass tray, and press [Enter].
8
Press [Close].
9
Enter the number of copies using the numeric keys.
% You can set 1 to 99 copies.
10
Press <Start>.
d
For details, see the Quick Guide, how to load paper.
2
bizhub 25e 2-7
2
2.3
2.3.1
Basic copy settings 2.3
Basic copy settings
d
You can change the default settings, as necessary. For details, see page 4-3.
Setting the document type
Set the document type according to the document.
Item
Text:
Auto:
Photo:
Background:
Description
Suitable to scan text.
Suitable to scan a document that contains both text and photos.
Suitable to scan photos.
Suitable to scan erasing the background (background pattern or color) of the document.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Doc. Type].
% If [Doc. Type] is not displayed, press [Advanced] and then select [Doc. Type].
4
Select the desired document type, and press [Enter].
5
Enter the number of copies using the numeric keys.
% You can set 1 to 99 copies.
6
Press <Start>.
2-8 bizhub 25e
2.3
2.3.2
Basic copy settings 2
Reduction / Enlargement
Adjust the magnification to reduce or enlarge the image. You can enlarge or reduce the image, either to fit to the paper or by specifying the magnification.
d
When enlarging the copy, load the document on the document glass.
You can set a magnification between 25 % and 400 % using the document glass and between 25 % and
100 % using the automatic document feeder.
Depending on the magnification, some of the image may be left out of the paper or there may be extra blank areas on the paper.
Zoom in / out to fit to the paper (Auto magnification)
To use auto magnification, specify the document size and paper size.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Select the cassette or the bypass tray containing the paper you want to use for copying.
4
Press [Doc. Size].
% The screen indicated here is displayed when the paper supply units is installed.
% If [Doc. Size] is not displayed, press [Advanced] and then select [Doc. Size].
5
Select the document size, and press [Enter].
6
Press [Advanced].
7
Press [Zoom].
bizhub 25e 2-9
2
8
Select [Auto], and press [Enter].
Basic copy settings 2.3
9
Press [Close].
10
Enter the number of copies using the numeric keys.
% You can set 1 to 99 copies.
11
Press <Start>.
Zoom in / out to fixed magnification
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Advanced].
4
Press [Zoom].
5
Select the magnification, and press [Enter].
% You can select the zoom ratio using the numeric keys or [+] and [-].
6
Press [Close].
7
Enter the number of copies using the numeric keys.
% You can set 1 to 99 copies.
8
Press <Start>.
2-10 bizhub 25e
2.3
Basic copy settings
Zoom in / out to a desired magnification
You can set the magnification within the range of 25 % to 400 % in increments or decrements of 1 %.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Select the cassette or the bypass tray containing the paper you want to use for copying.
4
Press [Advanced].
5
Press [Zoom].
6
Specify the magnification using the numeric keys or [+] and
[-], and press [Enter].
% You can use the fixed magnification settings and finally adjust the magnification with the zoom function.
2
7
Press [Close].
8
Enter the number of copies using the numeric keys.
% You can set 1 to 99 copies.
9
Press <Start>.
bizhub 25e 2-11
2 Basic copy settings 2.3
2-12 bizhub 25e
3
3.1
Introduction to advanced functions
3
3.1
Advanced copy functions
Introduction to advanced functions
This product includes the following copy functions.
Document type
Set the document type with according to the document. For details, see page 2-8.
Auto Text Photo Background
Reduction / Enlargement (Zoom)
3
Contrast
Set the contrast to scan with according to the document. For details, see page 3-5.
Sorting
The copied documents can be sorted in page order. This eliminates the need to sort them manually after
copying. For details, see page 3-6.
bizhub 25e 3-3
3 Introduction to advanced functions
Combine
You can copy a two page or four page document onto a single page. For details, see page 3-7.
3.1
Duplex copying
You can copy onto both sides of the paper. For details, see page 3-9.
Document size
You can erase the black shadows that appear when copying with the platen cover open. For details, see
Next document
Once scanning is completed for the current job, you can begin scanning the next copy job. For details, see
Card copy
You can copy the front and back of ID cards, checks, and custom size documents so that both sides are
printed together on a single page. For details, see page 3-15.
Front
Back
3-4
DocIndex
The DocIndex feature allows you to enter and send a metadata tag automatically to a network computer. For
bizhub 25e
3.2
Advanced copy functions
Copy reservation
3
3.2
3.2.1
Advanced copy functions
Setting the contrast
Set the contrast to scan with according to the document.
Item
Auto:
Lightest:
Lighter:
Normal:
Darker:
Darkest:
Description
Select to scan with the darker contrast.
Select to scan with the lightest contrast.
Select to scan with a contrast between the normal contrast and the lightest contrast.
Select to scan with the normal contrast.
Select to scan with a contrast between the normal contrast and the darkest contrast.
Select to scan with the darkest contrast.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Contrast].
If [Contrast] is not displayed, press [Advanced] and then select [Contrast].
4
Select the desired contrast, and press [Enter].
Lightest
Lighter
Normal
Darker
Darkest bizhub 25e
5
Press <Start>.
3-5
3
3.2.2
Advanced copy functions
Sorting
The copied documents can be sorted in page order. This eliminates the need to sort them manually after copying.
No sorting
The paper is sorted for each page of the document.
3.2
Sort
The paper is sorted for each copy.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Advanced].
4
Press [Sort].
5
Select [Sort], and press [Enter].
% Select [No Sorting] to deselect the setting..
6
Press [Close].
3-6 bizhub 25e
3.2
Advanced copy functions
-
-
7
Press <Start>.
When you have loaded the document on the automatic document feeder, this will complete the operation.
When you have loaded the document on the document glass, the following message will appear when the first page of the document is scanned.
3.2.3
-
-
8
Load the next page of the document, and press <Start> or [Next Doc].
Repeat this step until all pages of the document are scanned.
When you have finished scanning all pages, press [Complete].
Combined copying
You can copy a multiple page document onto a single page.
2-in-1
3
4-in-1
bizhub 25e d
If you set the combine setting, the copy magnification is automatically set. If you want to set the copy magnification, set it after setting the combine setting.
Depending on the size of document and paper, some of the image may be left out of the paper.
Note that the order on the combined page changes with the direction you load the document.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Advanced].
3-7
3
4
Press [Combine].
Advanced copy functions 3.2
5
Select the number of pages of the document to combine onto a single page, and press [Enter].
Select [OFF] to deselect the setting.
6
Press [Close].
7
Set the magnification and document size as needed.
8
Press <Start>.
% When you have loaded the document on the automatic document feeder, this will complete the operation.
When you have loaded the document on the document glass, the following message will appear when the first page of the document is scanned.
9
Load the next page of the document, and press <Start> or [Next Doc].
% Repeat this step until all pages of the document are scanned.
% When you have finished scanning all pages, press [Complete].
3-8 bizhub 25e
3.2
3.2.4
Advanced copy functions
Duplex copying
You can use this function to perform:
Duplex copying of a one-sided document (1 % 2 sided)
)
Duplex copying of a duplex document (2 % 2 sided)
3
One-sided copying of a duplex document (2 % 1 sided)
d
Enlargement copy is only available when you perform the duplex copying of one-sided documents (1 %
2sided) using the document glass.
You cannot use the document glass when performing one-sided copying of a duplex document (2 % 1 sided) and duplex copying of a duplex document (2 % 2 sided). Only the ADF (Automatic Document Feeder) can be used for copying.
A4, F4, A5, A5v, A6, letter, legal paper are available for duplex printing.
bizhub 25e 3-9
3
How to load your document
Document orientation
1
%
2 sided
Binding position
Long Edge
Short Edge
Long Edge
Short Edge
2 % 2 sided Long Edge
Short Edge
Long Edge
Short Edge
Advanced copy functions 3.2
Result image of duplexed copy
2 % 2 sided
Binding position
Long Edge
Document orientation
Short Edge
Long Edge
Short Edge
Result image of duplexed copy
3-10 bizhub 25e
3.2
Advanced copy functions
How to select the binding position
See the illustration below to select the binding type.
Long edge binding
Short edge binding
3
Duplex Copying of a One-sided Document (1
%
2 sided)
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [DuplexCopy].
If [DuplexCopy] is not displayed, press [Advanced] and then select [DuplexCopy].
4
Select [1 % 2 sided].
Select [OFF] to deselect the setting.
bizhub 25e 3-11
3
5
Select [Short Edge] or [Long Edge], and press [Enter].
6
Press <Start>.
% When you have loaded the document on the automatic document feeder, this will complete the operation.
% When you have loaded the document on the document glass, the following message will appear when the first page of the document is scanned.
Advanced copy functions 3.2
7
Load the next page of the document, and press <Start> or [Next Doc].
% Repeat this step until all pages of the document are scanned.
% When you have finished scanning all pages, press [Complete].
Duplex Copying of a Duplex Document (2
%
2 sided)
d
Use the automatic document feeder for copying. The document glass cannot be used.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [DuplexCopy].
% If [DuplexCopy] is not displayed, press [Advanced] and then select [DuplexCopy].
4
Select [2 % 2 sided].
Select [OFF] to deselect the setting.
5
Select [Short Edge] or [Long Edge], and press [Enter].
6
Press <Start>.
3-12 bizhub 25e
3.2
Advanced copy functions
One-sided copying of a duplex document (2
%
1 sided)
d
Use the automatic document feeder for copying. The document glass cannot be used.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [DuplexCopy].
% If [DuplexCopy] is not displayed, press [Advanced] and then select [DuplexCopy].
4
Select [2 % 1 sided].
3
Select [OFF] to deselect the setting.
5
Select [Short Edge] or [Long Edge], and press [Enter].
6
Press <Start>.
bizhub 25e 3-13
3
3.2.5
Advanced copy functions 3.2
Specifying the document size
Dark shadows are created around copy when you copy the document with the platen cover open or when you copy books and magazines. These shadows can be erased.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Doc. Size].
If [Doc. Size] is not displayed, press [Advanced] and then select [Doc. Size].
4
Select the size of the document to scan, and press [Enter].
5
If the paper size same to the selected document size is not loaded into the machine, select the cassette or the bypass tray and specify the paper to use.
% When the document size and the set paper match, this step is not required.
6
Press <Start>.
3-14 bizhub 25e
3.2
3.2.6
Advanced copy functions 3
Card copy
You can copy the front and back of ID cards, checks, and custom size documents so that both sides are printed together on a single sheet.
d
Use the document glass for copying. The automatic document feeder cannot be used.
When you set the card copy setting, the paper in the first cassette is selected as paper to copy automatically.
If you want to copy on other size or type of paper, set it after setting the card copy setting.
You can set a magnification between 100 % and 230 %.
Depending on the size of document and paper, some of the image may be left out of the paper.
Document orientation Copy image
ID Card
(56 mm × 86 mm)
Two ID Cards
(56 mm × 86 mm) × 2
Personal Check
(106 mm × 210 mm)
Business Check
(105 mm × 150 mm)
Custom Size
(40 mm to 148 mm) × (60 mm to 210 mm) bizhub 25e 3-15
3 Advanced copy functions 3.2
Copying an ID card or check
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Card Copy].
If [Card Copy] is not displayed, press [Advanced] and then select [Card Copy].
4
Select the desired document type, and press [Enter].
% Select [OFF] to deselect the setting.
% Select the paper as needed. For details, see page 2-5.
5
Press <Start>.
% The front side is scanned.
6
Turn the document over, and press [Next Doc] or <Start>.
% Load the next document, and repeat steps 6.
% When you have finished scanning all documents, press
[Complete].
3-16 bizhub 25e
3.2
Advanced copy functions
Copying custom size documents
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Card Copy].
% If [Card Copy] is not displayed, press [Advanced] and then select [Card Copy].
4
Press [Custom].
3
Select [OFF] to deselect the setting.
5
Set the document size using the numeric keysor [+] and [-], and press [Enter].
When entering with the numeric keys, press the document size entry box.
6
Press [Enter].
% Select the paper as needed. For details, see page 2-5.
7
Press <Start>.
% The front side is scanned.
8
Turn the document over, and press [Next Doc] or <Start>.
% Load the next document, and repeat steps 8.
% When you have finished scanning all documents, press [Complete].
bizhub 25e 3-17
3
3.2.7
Advanced copy functions 3.2
Scanning the next document
When you cannot load all the documents on the automatic document feeder or when you want to scan multiple pages on document glass, use this setting to continuously scan document of a large volume.
d
bine copy (page 3-7) or duplex copy (page 3-9) when the document is loaded on the document glass.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Advanced].
4
Press [Next Doc.].
5
Select [ON], and press [Enter].
% "ADF" stands for automatic document feeder.
% "FBS" stands for document glass (flat bed scanner).
Select [OFF] to deselect the setting.
6
Press [Close].
7
Press <Start>.
% When the documents have been scanned, the message
"Set next document." is displayed.
8
Load the next document to scan.
3-18 bizhub 25e
3.2
Advanced copy functions
9
Press [Next Doc] or <Start>.
% If you want to scan another document, repeat steps 8 and 9.
10
When you have finished scanning all the documents, press [Complete].
3
bizhub 25e 3-19
3
3.2.8
Advanced copy functions 3.2
About combining functions
There are functions that cannot be set in combination. Either the latter win the priority, or you cannot select one in addition. In such case cancel one of the function by deselecting it.
When the latter function wins the priority, you see a message on the display that the former setting is deselected. Here is an example:
Here the magnification is automatically canceled.
When you set a function, the functions that cannot be set afterwards are shaded. Here is an example:
Here you cannot select the document size.
3-20 bizhub 25e
3.2
3.2.9
Advanced copy functions 3
Using DocIndex
The DocIndex feature allows you to enter tag (metadata indicating the attributes) and send it automatically to a network computer.
d
Set DocIndex before using this function. For details, refer to Chapter 5 in the User’s Guide Message Board
Operations.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready" screen is displayed.
3
Press [Advanced].
4
Press [DocIndex].
bizhub 25e
5
Select the DocIndex setting you wish to use.
% If only one DocIndex setting is registered, this screen is not displayed. Proceed to step 6.
6
Set the DocIndex.
% If the date field is required, please insert the current date and press [Enter].
% If the selected DocIndex setting has been defined as requiring user authentication and you have not logged in, the login screen will appear. For details on logging in, refer to Chapter 2, "Logging In /
Logging out" in the User's Guide Administrator Operations.
% If the tag entry was set to "List Input", the defined text strings will appear as keys. Select a value from the list. (If the text string is defined as editable, the character entry screen will appear. Change the value (if needed) and then press [Enter].)
% If the tag entry was set to character entry, enter the appropriate text string manually, and then press
[Enter].
7
Confirm the entered values, and press [Enter].
% If you want to correct a value, select the value and correct it.
3-21
3 Advanced copy functions 3.2
8
Press [Close].
9
Press <Start>.
The message "Checking copy DocIndex Availability" is displayed, and the folder in which the ScanTag was registered is checked. Scanning will start when the check is complete.
10
Press [Yes] to copy another document using the tag settings in step 6.
% Press [No] to complete the operation or specify different tag settings.
d
If the registered folder cannot be checked in step 9, the message "Please confirm the location." is displayed and an error occurs. Check the settings in Message Board.
3-22 bizhub 25e
4
4.1
Specifying default settings 4
4
4.1
Device settings
Specifying default settings
The default values are those applied when you press <Reset>.
The machine returns to the default setting when you press <Reset> or the machine is left idle without any operation for a designated period of time.
Changing the default values of often-used functions can shorten the time required to adjust settings.
4.1.1
d
You can set the time it takes to return to the default setting. For details, see Chapter 2 in the Administrator’s
Guide.
Specifying default copy function settings
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is displayed.
2
Press [Default Setting].
3
Press [Copy Settings].
4
Press [Default Settings].
bizhub 25e 4-3
4
5
Select the item to set.
Specifying default settings 4.1
6
Select the default value, and press [Enter].
% To continue to specify other default values, repeat the operation from step 5.
4.1.2
List of default copy settings
Function Description
Doc. Type This sets the default document type setting.
Contrast
Zoom
Doc. Size
Next Doc.
Sort
This sets the default contrast setting.
This sets the default setting for the copy zoom ratio.
This sets the default setting for the size of the document.
Matching the setting with the size of frequently copied documents can shorten the time required to adjust settings.
If this is set to ON, when the scanning of a document has finished, you can set the next document continuously as the same job.
You can set to have the sort function enabled by default.
Settings
Text
Auto
Photo
Background
Auto
Lightest
Lighter
Normal
Darker
Darkest
Auto
100%
A4
F5
A5
ADF (Automatic documet feeder)
OFF
,
ON
FBS (Document glass)
OFF
,
ON
No Sorting
Sort d
Highlighted values are the default settings specified at the time of shipment.
4-4 bizhub 25e
4.1
4.1.3
Specifying default settings 4
Settings the copy reservation
When this function is enabled, you can start scanning the document while the machine is printing out the former job.
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is displayed.
2
Press [Default Setting].
3
Press [Copy Settings].
4
Press [Other Settings].
5
Press [Copy Reservation].
6
Select [ON], and press [Enter].
% Select [OFF] to deselect the setting.
bizhub 25e 4-5
4 Specifying default settings 4.1
4-6 bizhub 25e
advertisement