User manual - BeSafe / BeSafe

User manual - BeSafe / BeSafe
User manual
GB
www.besafe.eu
Complies with revised
standard:
ECE R44/04
Tested and Approved
AIRBAG
EXTREME HAZARD:
Do not use on
passenger seats fitted
with activated airbag
ECE R44/04
universal 0-13 kg
E4
04443548
Thank you for choosing BeSafe iZi Sleep
!
It is important that you read this user manual BEFORE
installing your iZi Sleep. Incorrect installation could endanger
your child.
Safety and convenience
As you and we know, safety comes first when children are
involved. For that reason the iZi Sleep complies to and
exceeds the highest safety requirements.
In order to provide as much convenience as possible, the iZi
Sleep seat introduces its innovative reclining-system: outside
the car, your child can comfortably rest and sleep in the iZi
Sleep, being put completely flat.
!
DO NOT use the seat in sleeping position when installed in
your car.
‘Safe-to-drive’ indication
don’t drive
don’t drive
safe-to-drive
‘safe-to-drive’ indication on
handle-rotation knob
iZi Sleep child safety seat usage
a Car seat
b Rocking chair,
infant-carrier
!
!
Be aware of the ‘safe-todrive‘ indication.
c Sleeping chair
!
Always check the handle is
upright and locked properly
before carrying.
d Seat placed on top of a
range of strollers (see
www.besafe.eu)
DO NOT use the seat in
sleeping position when
installed in your car.
Contents
Vital information
Preparing to install
Installation in the car
Removing the iZi Sleep from the car
Sleeping position
After an accident
Guarantee
Removing and refitting the cover
Using the iZi Sleep with a stroller
Warning: Potential misuse
Important advice
Point of sale information
4
6
8
10
10
11
11
12
14
16
18
20
Vital information
- EXTREME HAZARD - DO NOT use on a passenger
seat fitted with activated airbag.
AIRBAG
- iZi Sleep, only rear facing installation allowed.
- DO NOT use the iZi Sleep in sleeping position when
installed in your car.
- ONLY use the iZi Sleep on forward facing car seats.
- ONLY install the iZi Sleep with a 3-point-belt approved to
UN/ECE regulation No. 16 or other equivalent standards.
Second-hand car seats
BeSafe advices that child seats should not be bought or sold
second-hand. Many seats sold through local advertising and
car-boot sales have been found to be dangerous.
Important: Correct seat belts
iZi Sleep is only approved with 3-point-belt installation.
OK
NO
Shoulder
belt
Lap belt
This is a 3-point-belt
This is a 2-point-belt
Positioning in car:
Rear facing installation:
AIRBAG
Only rear facing installation
allowed.
Allowed positions in car,
only with 3-point-belt.
Preparing to install
Crucial parts
1 Sun canopy
2 ‘safe-to-drive’ indication
3 Handle release buttons
4 Internal harness
5 Harness buckle
6 Central adjuster
7 Crotch belt
8 Carrying handle (also tensioner)
9 Upper cover
10 Shoulder belt guide
11 Lower cover
12 Belt slot
13 Shoulder belt guide
14 Base
15 Stroller adapter house
16 Stroller adapter handle
17 Shoulder belt slot (3x)
18 Shoulder belt adjuster
19 Storage compartment
user manual
Fitting your child in the iZi Sleep
a
Position of the shoulder belt:
Check that the shoulder belt
slots (17) are level with your
child’s shoulders.
Too high
b Adjusting the schoulder belts:
Open the storage compartment (19)
on the back of the iZi Sleep. Detach
the shoulder belt adjuster (18), and
place it in the correct position by
supporting the belt from the inside.
(see illustration above). Make sure
adjuster is clicked in.
c Lay the shoulder belts (4) over the
sides of the iZi Sleep, before your
child is seated. Put the child in
the seat. Place the belts over the
shoulder and close the harness
buckle (5). Pull the central adjuster
(6). Just two fingers should fit
between child and shoulder belt.
Make sure the belts are not twisted.
19
Too low
Correct
18
When the child weighs over 13kg or the child’s head grows
above the seat, the child should change to the iZi Comfort,
group 1 seat.
!
You must adjust the shoulder belt of the harness to the
correct position for your child before installing the seat.
The harness must be fastened and adjusted correctly at all
times. Children should be encouraged to remain within the
harness system.
Installation in the car
!
The iZi Sleep can only be used with a 3-point-belt.
!
Rear facing installation only.
!
CHECK the ‘safe-to-drive-indication’
!
EXTREME HAZARD - DO NOT use on a passenger
seat fitted with activated airbag.
AIRBAG
1
Make sure the iZi Sleep is placed in rear facing position.
2
Make sure the carrying handle (8) is in the
carrying position.
3
Pull the 3-point-belt around the back
of the iZi Sleep, and fasten the seat
belt,‘click’.
8
Make sure the lap belt of
the 3-point-belt is placed
between base (14) and
lower seat shell. Pull the
3-point-belt through the
shoulder belt guide (10)
and belt slot (12), only at
the buckle side. Follow
the blue indications on the
seat.Tighten the 3-point-belt
firmly around the iZi Sleep.
4
10
12
14
Press the handle release
buttons (3) on the inside of
the handle and move the
carrying handle (tensioner)
(8) to the furthest possible
of the 2 ‘safe-to-drive’
positions.
For better contact, place
the backrest of the car seat
more upright, if possible.
5
8
2
1
3
Check the ‘safe-to-drive’
indication (2) on the
carrying handle, near the
handle release button (3).
safe-to-drive
don’t drive
‘safe-to-drive’ indication on
carrying handle
Removing the iZi Sleep from the car
Push the handle release buttons (3) and move the handle
into carrying position. Then, release
����������������������������������
the 3-point-belt from the
buckle and remove the belt from the belt guide.
Sleeping position
!
DO NOT use the seat in sleeping position when installed in
your car.
Your child can comfortably rest and sleep in the iZi Sleep,
when put in the sleeping position (only outside the car) . To
put the iZi Sleep into the sleeping position, push both handle
release buttons (3) on the inside of the carrying handle (8)
and move the handle to the head of the iZi Sleep.
8
3
After an accident
After an accident, the iZi Sleep and your car seat belts
should be replaced. Although they may look undamaged, if
you were to have another accident, the iZi Sleep and your
car seat belts may not be able to protect your child as well
as they should.
10
Guarantee
All BeSafe products are carefully designed, manufactured
and tested. All BeSafe child safety seats are tested
periodically out of our continuous production in our test
laboratory. Furthermore they are tested by independent test
institutes.
Should this product prove faulty within 24 months of
purchase due to materials or manufacturing fault, except
covers and child safety belt, please return it to the original
place of purchase.
The guarantee is only valid when you use your seat
appropriately and with care. Please contact your dealer, he
will decide if the seat will be returned to the manufacturer
for repair. Replacement or return cannot be claimed. The
guarantee does not get extended through repair.
The guarantee expires:
- When there is no receipt.
- When defects are caused by wrong and improper use .
- When defects are caused by abuse, misuse or negligence.
11
Removing and refitting the cover
!
The cover is a safety feature. Never use the iZi Sleep
without it.
!
DO use the child safety belt provided with the iZi Sleep at all
times.
Removing the cover
Pay attention when removing the cover,
refitting is done in reverse order.
1 Remove the head hugger and crotch
pad (blue).
2
Removing the upper cover (9):
- Detach the cover from the small hooks on both sides of
the back part (a).
- Release the rubber bands that attach the cover to the
inside of the back (b).
- Open the zippers on both sides and detach the Velcro tape (c).
- Pull the cover from the seat plate (d).
a
9
c
b
d
12
3
Removing the lower cover (11):
- Detach the elastic knots of the
lower cover (e).
e
- Pull the cover over the central
adjuster (6).
11
- Detach the elastics which attach
the cover to the inside of the
seat-part of the iZi Sleep.
Refitting the cover
Refit the cover, using the instructions above in reversed
order. Start by pulling the cover over the seat plate.
Washing instructions
!
The cover of the iZi Sleep should be washed in accordance
with instructions (on the inside of the cover).
The cover should be washed on a 30 degrees woolwash
program with delicate washing powder . Do not tuble dry
the cover, drip-dry only.
Alcantara:
Cleaning harness system and iZi Sleep
Do not use any aggresive cleaning products; these may
harm the construction material of the iZi Sleep. Clean by
hand with water and mild soap.
13
Using the iZi Sleep with a stroller
The iZi Sleep can be installed on a range of strollers. For a
complete list check www.besafe.eu.
Installation on a stroller
1
Align the stroller adapter house (15) above the
adapter on the stroller and move straight down, ‘click’.
15
2
Move the carrying handle (8) into sleeping position.
8
14
Removing from a stroller
1
Move the carrying handle (8) into carrying position.
8
2
Push the stroller adapter handle (16) upwards and
lift the iZi Sleep vertically from the stroller.
16
15
Warning: Potential misuse
!
!
!
Forward facing is forbidden.
Reclined position in car is
forbidden.
“safe-to-drive” indication = red
Carrying handle (8) in carrying
position is forbidden.
“safe-to-drive” indication = red
16
!
Active airbag is forbidden.
AIRBAG
Correct installation
Shoulder belt only at buckle
side in belt slot (12).
12
17
Important advice
!
- DO use the child safety belt
all times.
provided with
the iZi Sleep at
- Be aware of the ‘safe-to-drive’ indication.
- Make sure both 3-point-belt and child safety belt are
tightened firmly, in order to prevent any unwanted
dislocation of child or iZi Sleep. Check frequently.
- DO NOT use anything, such as a cushion or coat, to raise
the iZi Sleep off the passenger seat. In an accident the
iZiSleep and the car seat-belts will not be able to protect
your child as well as they should.
- All passengers should be fastened by a safety belt.
- Make sure all passengers are informed on how to release
your child in case of emergency.
- Make sure luggage or other objects are properly secured.
Unsecured luggage may cause severe injuries to children
and adults in case of accidents
- Rigid items and plastic parts of the iZi Sleep must be
so located and installed that they are not liable, during
everyday use of the vehicle, to become trapped by a
movable seat or in a door of the vehicle.
- An unoccupied iZi Sleep should still be fastened.
18
!
- DO keep this user manual in the pocket on the back of
the seat.
- DO NOT attempt to dismantle, modify or add to any part
to the iZi Sleep or change the way your car seatbelts are
made or used.
- Warranty will expire if non-original parts or accessories
are used.
- DO NOT use the iZi Sleep for longer than 5 years. Due to
ageing, the quality of the material may change.
- Never leave your child unattended in the iZi Sleep.
- DO make sure the handle is upright and locked properly
before carrying your baby in the iZi Sleep.
- DO NOT place the iZi Sleep child safety seat on a table or
worktop.
- The cover is a safety feature. Never use the iZi Sleep
without it.
- The cover of the iZi Sleep should be washed in
accordance with the instructions.
- Do not use any aggresive cleaning products; these may
harm the construction material of the iZi Sleep.
19
Point of sale information
Notice:
1. This is a ‘Universal’ child restraint. It is approved to
regulation No. 44.04 series of amendments, for general
use in vehicles and it will fit most, but not all, car seats.
2. A correct fit is likely if the vehicle manufacturer has
declared in the vehicle handbook that the vehicle is
capable of accepting a ‘Universal’ child restraint for this
age group.
3. This child restraint has been classified as ‘Universal’
under more stringent conditions than those which
applied to earlier designs which do not carry this notice.
4. If in doubt, consult either the child restraint manufacturer
or the retailer.
5. Only suitable if the approved vehicles are fitted with
3-point-belts, approved to UN/ECE Regulation No. 16 or
other equivalent standards.
!
!
EXTREME HAZARD - DO NOT use on a passenger seat
fitted with activated airbags.
AIRBAG
DO NOT use the seat in sleeping position when installed in
your car.
2007 - v8.0
For more information:
N-3535 Krøderen, Norway
www.besafe.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement