Panasonic LightPen3 Interactive Software Operating Instructions
Below you will find brief information for Interactive Software LightPen3. The LightPen3 software enables you to write or draw on the projection screen under circumstances such as schools, educational events or meetings with the Interactive Pen or the Interactive Pointer.
advertisement
Windows / Mac OS
Operating Instructions
Interactive Software
LightPen3
Thank you for purchasing this Panasonic Product.
J
Before operating this product, please read these instructions carefully.
ENGLISH
TQBH0307
Note
The illustrations and screenshots in this manual may be different from those on your computer.
Term
• In these instructions, the "Interactive Pen" and the "Interactive Pointer" accessories are referred to as the "Pen" and "Pointer".
2
Introduction
These instructions are for "LightPen3" software of the Interactive function.
Introduction
(continued)
■
Features
This software enables you to write or draw on the projection screen under circumstances such as schools, educational events or meetings with the Interactive Pen or the Interactive Pointer.
Interactive supported projector
USB cable
PC installed with this software
Interactive Pen or Interactive
Pointer
●
Mouse function
You can use the Pen or the Pointer as a PC mouse on the projection screen.
●
Pen function
You can use the Pen or the Pointer to draw directly on the projection screen and save it in the PC.
●
Dual Pen function (For Windows only)
When 2 Pens or 2 Pointers are in use together, you can draw on the projection screens.
●
PowerPoint Tool bar function (For Windows only)
During the PowerPoint slide show mode, you can use the Pen or the Pointer to draw directly on the projection screen and save it in the PC.
■
The Contents of the CD-ROM
The following table contents are included in the "LightPen3" CD-ROM.
For Windows
For Mac OS
For Linux
SPDriver
○
○
○
LightPen3
Software
○
○
×
•
Note
LightPen3 Software (Drawing application) dedicated for Linux is not included in the CD-ROM contents and the "Pen function" does not work. You can use the Pen or the Pointer as a PC mouse function on the projection screen.
3
System requirements
In order for the SPDriver and the LightPen3 software to work properly, the computer system must meet the following requirements.
OS
Software library
CPU
Microsoft Windows XP 32 bit, Windows Vista 32 bit
Windows 7 32/64 bit, Windows 8 32/64 bit
Microsoft .NET Framework 2.0 is required.
Intel Core 2 Duo 2.0 GHz or more
(dedicated GPU is recommended)
Memory 2 GB or more
Free space on the hard disk 100 MB or more
•
•
Note
Please notice that it is not guaranteed of the proper operations for system requirements other than the above mentioned requirements or for the self-made computers.
If the USB port monitor software is working, the LightPen3 software or the SPDriver software may not work properly. In this case, please exit the monitor software before using the LightPen3 software or the SPDriver software.
Even all the requirements are meet, there is not guaranteed operations for all computers.
Screen images used in these instructions are subject to change without notice.
•
•
Note
For Windows system, do not use the supplied CD-ROM. Connect the computer to the projector via a USB cable, installation screen of "SPDriver" will appear automatically and follow the installation instructions on the screen.
For Windows 8 system, select "Desktop" from the tile displaying of the startup screen and perform the installation.
Installation of the Driver and Software
1)
2)
Insert the software recorded CD-ROM into the CD drive.
Double click the “setup.exe” in the “WIN” folder.
•
Initial image displays.
3)
4)
Click “1.SPDriver”.
Start Installation and follow the on-screen instructions.
4
For Windows
(continued)
•
The following image displays.
5) SPDriver icon (red) will be created on the taskbar when installation finished.
6)
7)
Click "2.LightPen3" on the initial image in the previous page.
Start Installation and follow the on-screen instructions.
•
The following image displays.
8) Shortcut icon will be created on the desktop when installation finished.
•
•
Note
Download the latest versions of "LightPen3" software from the following URL. http://panasonic.net/avc/projector/
The LightPen3 software may not work properly for some computers.
9)
5
For Windows
(continued)
Interactive functions initial settings
First, carry out the calibration for the projector sensor to accurately recognize the position of the projected screen.
■
Start the Software
1) Connect the computer to the projector via a USB cable.
•
The SPDriver icon in the taskbar turns from red into green.
2) Click "Start"→"All Programs"→"LightPen"→"LightPen3"→"LightPen3" from the
desktop.
Or double click the shortcut icon of "LightPen3" from the desktop.
•
Tool bar appears on the right of the screen.
Tool bar
: SPD icon
: Mouse icon
6
For Windows
(continued)
■
Select the operation mode of cursor
3) Click the "SPDriver" icon on the taskbar and select "Mouse" or "Touch" from the popup "Mode management".
Mouse
Touch
Cursor acts as a computer mouse.
Mode for touch display, and available for dual touch.
•
Note
Windows 7 support "Touch" mode and "Mouse" mode. Windows 8 only supports "Touch" mode. Windows XP and Windows
Vista only support "Mouse" mode.
■
Perform the Calibration of the camera
4) Click the "SPDriver" icon on the taskbar and select "Auto Calibration" from the popup menu.
•
Display the auto calibration screen and perform the auto adjustment. During the adjustment, do not block the projection image with any object or figure.
•
•
•
If auto calibration fails, a confirmation screen for manual calibration will appear and select “Confirm” or
“Cancel” to continue.
Select “Cancel” to perform the auto calibration again.
Before performing the auto calibration again, please check the following situations.
1. Turn off the lights to darken the surroundings and reduce the reflection of external light to the
2. projection screen.
Readjust the focus again.
•
•
Select “Confirm” to display the manual calibration screen.
Click the “SPDriver” icon on the taskbar and select the pop-up “Setting (Manual)” to display the manual calibration screen.
7
For Windows
(continued)
Please use the LightPen to touch the target marks on the screen.
(If you would like to quit the calibration process, please use the
“ESC” key.) After the 4th point of calibration is finished, please wait for 2 secs while data is saved.
3)
4)
Press the target mark
in the screen with the Pen.
•
Each time you press the target mark, the moving order is
.
Press the target mark
•
.
The “Please wait...” message appears, and after completing the process the message will disappear.
•
•
Attention
When carrying out the "Auto Calibration", make sure to project image onto a smooth screen.
If the projector detects the resolution be modified, the message "Resolution changed, please modify" will display, please carry out the Calibration again.
•
Note
When the position of the screen and the projector is fixed, there is no need for calibration again next time if you use the same computer at the same resolution.
8
For Windows
(continued)
How to use the Interactive functions
■
Tool bar functions
Tool bar
: SPD icon
: Mouse icon
Icon
Mouse
Red pen
Name
Green pen
Blue pen
Marker pen
Shape tool
Line thickness and color change tool
Eraser
To perform as a PC mouse.
To draw as a red pen.
To draw as a green pen.
To draw as a blue pen.
Description
To draw as a half-transparent yellow pen.
To draw a circle, a square, a triangle or a straight line.
To change the color and the thickness of the Pen.
To partially erase the pictures or lines.
Erase all
Save
Dual Pen
Whiteboard tool
Previous page
Next page
Editing tool
To erase all the pictures and lines.
To save the displaying screen to the computer.
To draw a picture in the "Full-screen mode" or "Divided-screen mode" with the 2 Pens.
To change the background to the whiteboard mode.
To return to the previous page.
To go to the next page.
To edit the drawn pictures or lines.
On-Screen Keyboard To display the On-Screen Keyboard.
Exit
To exit LightPen3.
Page
-
-
-
-
-
11
11
11
13
-
-
14
15
17
-
-
-
9
For Windows
(continued)
■
For "Mouse mode" and "Pen mode"
Mouse mode
Pen mode
: Mouse icon
: Pen icon
●
Mouse mode
The "Mouse mode" is active immediately after Startup. Use a Pen or a Pointer to move the mouse cursor.
•
•
When using the Pen, press the tip of the Pen to the screen as the use of a normal pen.
When using the Pointer (Optional accessories), press and hold down the button during use.
During mouse mode, press and hold the Pointer button or the tip of the Pen for about 2-3 seconds to do rightclick.
●
Pen mode
Select the Pen icon (Red pen/Green pen/Blue pen/Marker pen) from the tool bar and draw a line with a Pen or a Pointer. You can set the thickness and the color of the line.
•
•
When using the Pen, press the tip of the Pen to the screen to draw a line as the use of a normal pen.
When using the Pointer, press and hold down the button to draw a line.
•
Note
Press the icon on the taskbar to switch the "Mouse mode" or the "Pen mode".
■
Position changing and Displaying / Hiding of the tool bar
10
You can change the position of the tool bar, or switch the displaying / hiding of the tool bar.
For Windows
(continued)
•
•
•
•
If you use the Pen or the Pointer to click a little space left to the projection screen edge, the tool bar will move to the left.
To move the tool bar below the screen and display it horizontally, use the Pen or the Pointer to click a little space below the projection screen edge.
If you use the Pen or the Pointer to click a little space right to the projection screen edge, the tool bar will move to the right.
To switch the displaying or hiding of the tool bar, use the Pen or the Pointer to click a little space outside of the projection screen with the tool bar side.
■
Shape tool
Click the "Shape tool" icon to display the following menu and select the shape you want to draw.
■
Line thickness and color change tool
Click the "Line thickness and color change tool" icon to display the following menu and choose the thickness or color of the line.
■
Dual Pen tool
Click the "Dual Pen tool" icon to display the following menu and select the mode you want to draw.
●
Functions of Dual Pen
Icon Name
Full-screen mode
Divided-screen mode
Description
To draw on the entire screen with two same color Pens.
To draw on the equally-divided screen with two same or different color Pens.
11
For Windows
(continued)
Full-screen mode
Divided-screen mode
Left tool display Right tool display
Tool bar
12
●
Function of the tool bar for dual Pen
Icon
Name
Red Pen
To draw with a red pen.
Green Pen
Blue Pen
White Pen
Thin circular stroke
To draw with a green pen.
To draw with a blue pen.
To draw with a white pen.
Description
To draw with a thin circular stroke.
Thick circular stroke
To draw with a round thick stroke.
Square stroke
To draw with a square stroke.
Eraser
Erase all
To partially erase the pictures and lines.
To erase all the pictures and lines.
Wallpaper select tool
To change the background to any wallpaper.
Tool bar
For Windows
(continued)
Save
Exit
To save the displaying screen to your computer.
To exit "Full-screen mode" or "Divided-screen mode".
•
•
Note
You can draw with a combination of the color and thickness of the Pen. In the tool bar, the background of the color and thickness of the selected Pen displays bright.
In the "Divided-screen mode", the selected mode (the color of the Pen, Eraser, Erase all) will be displayed at the top left screen with certain icons.
■
Whiteboard tool
Select the "Whiteboard tool" icon to make the wallpaper of the PC screen white. The (previous page) and the (next page) icons are replaced by the (wallpaper selection) and the (white wallpaper) icons.
(1) Select the icon to open the following window where you can choose the wallpaper that you want to use.
(2) Select the icon to change the wallpaper to white.
(3) To exit the Whiteboard mode, select the icon.
Related whiteboard tools
13
For Windows
(continued)
■
Editing tool
Select the icon to display the following "Editing tool" bar and select the necessary functions of the editing work.
● Functions of Editing bar
Icon
Name
Object selecting, moving, scaling
Object rotating
Undo
Undo canceling
Spotlight
Description
To select, to move, to scale the object that you draw.
To rotate the object that you draw.
To print the screen you drew.
To return to the last action.
To cancel the returning of the last action.
To display the part you want to emphasize.
Curtain
Vertical and horizontal shifting
To cover the part you want to hide.
To array the tool bar verticaly or horizontally.
Left and right shifting To move the tool bar left or right.
Editing tool bar
•
Note
Select the drawn object first and start to rotate with the "Object rotation" function. If you do not select the object, a message "Select the picture first" will display.
●
Spotlight mode
Select the icon to display the below spotlight image.
Exit button
Cursor
When the cursor becomes a cross, you can change the position of the spotlight and drag.
When the cursor becomes a hand, you can change the size of the spotlight and drag.
When you finish viewing the spotlight, press the exit button on the top left to exit.
14
●
Curtain mode
Select the icon to change the entire screen to black.
For Windows
(continued)
Exit button
Cursor
■
Place the cursor on the up, down, left or right button and the cursor will change to an arrow, drag the arrows to adjust the black curtain size.
When the cursor become a hand, you can drag it to move the black curtain.
When you finish viewing the curtain, press the button in the center to exit.
On-screen keyboard
Select the icon to display the below On-Screen Keyboard. You can write text to a document via the "Mouse mode".
•
Note
When using the On-screen keyboard in Windows 7, please make sure to set the security level of User Accounts to "Never notify". For changing the security level, click "Start" -> "Control Panel" -> "User Accounts" -> "User Account Control Settings".
How to use the PowerPoint Tool
1) Click the mouse icon in the taskbar and set the "PowerPoint Tool setting" to [On].
2) Start projection of the PowerPoint file with the "Slide Show Mode".
•
The PowerPoint Tool appears on the right side of the screen and you can draw during the slide.
15
For Windows
(continued)
PowerPoint tool bar
●
Functions of the PowerPoint Tool bar
Icon
Name
Tool bar minimize
Tool bar position change
Mouse
To perform the mouse mode.
Description
To switch displaying / hiding of the other icons.
To move the tool bar to the left or right.
Mouse right button
Red Pen
To perform as the right button of the mouse.
To draw with a red pen.
To partially erase the pictures or lines.
Eraser
Erase all
Previous page
Next page
Page selecting
Exit
To erase all the pictures or lines.
To return to the previous page.
To go to the next page.
To select the page you want to project from the list of slide show page.
To exit the slide show mode.
•
•
Note
When you exit "Slide show mode", the PowerPoint Tool will automatically disappear.
The PowerPoint Tool does not support PowerPoint 2002.
16
For Windows
(continued)
To exit the Software and Driver
■
If you want to exit the LightPen3 from the tool bar
Select the icon (exit icon) from the tool bar.
■
If you want to exit the LightPen3 from the taskbar
Click the icon (Mouse icon) from the taskbar and select .
■
To exit SPDriver
Click the icon (SPD icon) from the taskbar and select
To uninstall the Software and Driver
.
1) Select "Start" → "All Programs" →"LightPen"→"LightPen3" → "Uninstall LightPen3" on the desktop.
2)
3)
4)
Follow the uninstallation steps on the screen.
Select "Start" → "All Programs" →"LightPen"→"SPDriver" → "Uninstall SPDriver" on the desktop.
Follow the uninstallation steps on the screen.
17
System requirements
In order for the SPDriver and the LightPen3 software to work properly, the computer system must meet the following requirements.
OS
CPU
Memory
Mac OS X v10.5 ~ v10.8
Intel processor
2 GB or more
Free space on the hard disk 100 MB or more
•
•
Note
Please notice that it is not guaranteed of the proper operations for system requirements other than the above mentioned requirements or for the self-made computers.
The LightPen3 software may not work properly depending on the Mac OS version. In this case, please update to the latest version of Mac OS version before using the LightPen3 software. [For example: Please update from v10.7.2 to v10.7.5.]
Even all the requirements are meet, there is not guaranteed operations for all computers.
Screen images used in these instructions are subject to change without notice.
1)
Installation of the Driver and Software
Insert the software recorded CD-ROM into the CD drive.
2) Open the "MAC" folder, copy the "SP Driver.app" and "LightPen3.app" onto your desktop.
•
The “SP Driver icon“ (red) appears in the task bar and the “SP Driver.app“ and “LightPen3.app“ icons appear on the desktop as below pictures shown.
3) Take the CD-ROM out from the CD drive.
•
Attention
Please do not start the software directly from the CD-ROM.
•
Note
Download the latest versions of "LightPen3" software from the following URL. http://panasonic.net/avc/projector/
Interactive function initial settings
First, carry out the calibration for the projector sensor to accurately recognize the position of the projected screen.
■
Start the Software
1) Connect the computer and the projector via a USB cable.
•
The SPDriver icon in the taskbar turns from red into green.
2) Double click the "LightPen3.app" on the desktop.
•
Tool bar appears at the right of the screen.
18
For Mac OS
(continued)
: SPD icon
: Mouse icon
Tool bar
■
Perform the Calibration of the camera
3) Click the "SPDriver" icon on the taskbar.
4) Select the pop-up "Calibration".
•
Manual calibration screen displays.
5)
6)
Press the target mark
in the screen with the Pen.
•
Each time you press the target mark, the moving order is
.
Press the target mark
•
.
The “Please wait...” message appears, and after completing the process the message will disappear.
•
Note
When the position of the screen and the projector is fixed, there is no need for calibration again next time if you use the same computer at the same resolution.
19
For Mac OS
(continued)
How to use the Interactive function
■
Tool bar functions
: SPD icon
: Mouse icon
Tool bar
20
Icon
Mouse
Red pen
Name
Green pen
Blue pen
Marker pen
Shape tool
Line thickness and color change tool
Eraser
Erase all
Save
Description
To perform as a PC mouse.
To draw as a red pen.
To draw as a green pen.
To draw as a blue pen.
To draw as a half-transparent yellow pen.
To draw a circle, a square, a triangle or a straight line.
To change the color and the thickness of the Pen.
To partially erase the pictures or lines.
To erase all the pictures or lines.
To save the displaying screen to the computer.
Whiteboard tool
Previous page
Next page
Editing tool
To change the background to the whiteboard mode.
To return to the previous page.
To go to the next page.
To edit the drawn pictures or lines.
On-Screen Keyboard To display the On-Screen Keyboard.
Exit
To exit LightPen3.
Page
-
-
-
-
-
22
22
-
-
24
24
24
-
-
-
23
■
For "Mouse mode" and "Pen mode"
For Mac OS
(continued)
: SPD icon
: Mouse icon
Mouse mode
Pen mode
●
Mouse mode
The "Mouse mode" is active immediately after Startup. Use a Pen or a Pointer to move the mouse cursor.
•
•
When using the Pen, press the tip of the Pen to the screen as the use of a normal pen.
When using the Pointer (Optional accessories), press and hold down the button during use.
During mouse mode, press and hold the Pointer button or the tip of the Pen for about 2-3 seconds to do rightclick.
●
Pen mode
Select the Pen icon (Red pen/Green pen/Blue pen/Marker pen) from the tool bar and draw a line with a Pen or a Pointer. You can set the thickness and the color of the line.
•
•
When using the Pen, press the tip of the Pen to the screen to draw a line as the use of a normal pen.
When using the Pointer, press and hold down the button to draw a line.
•
Note
Press the icon on the taskbar to switch the "Mouse mode" or the "Pen mode".
●
Quick switch of the “Mouse mode” or the “Pen mode”.
: SPD icon
: Mouse icon
You can switch the "Mouse mode" or the "Pen mode" (Red pen/Green pen/Blue pen/Marker pen) function by
21
For Mac OS
(continued)
simply using the Pen or the Pointer to click a little space up above or below the projection screen edge.
•
The Pen color was the last selected color when using “Pen mode“.
■
Position changing and Displaying / Hiding of the tool bar
You can change the position of the tool bar or switch to display or hide of the tool bar.
•
•
If you use the Pen or the Pointer to click a little space left to the projection screen edge, the tool bar will move to the left. To move the tool bar to the right, use the Pen or the Pointer to click a little space right to the projection screen edge.
To switch the displaying or hiding of the tool bar, use the Pen or the Pointer to click a little space outside of the projection screen with the tool bar side.
■
Shape tool
Click the "Shape tool" icon to display the following menu and select the shape you want to draw.
■
Line thickness and color change tool
Click the "Line thickness and color change tool" icon to display the following menu and choose the thickness or color of the line.
Color palette botton
22
You can select rich color palette from the following picture in the Mac OS system.
•
Set the switching of the 5 types of color palette button.
For Mac OS
(continued)
■
Whiteboard tool
Select the "Whiteboard tool" icon to make the wallpaper of the PC screen white. The (previous page) and the (next page) icons are replaced by the (wallpaper selection) and the (white wallpaper) icons.
(1) Select the icon to open the following window where you can choose the wallpaper that you want to use.
(2) Select the icon to change the wallpaper to white.
(3) To exit the Whiteboard mode, select the icon.
Related whiteboard tools
23
For Mac OS
(continued)
■
Editing tool
Select the icon to display the following "Editing tool" bar and select the necessary functions of the editing work.
Editing tool bar
●
Functions of Editing bar
Icon
Name
Object selecting, moving, scaling, rotating
Description
To select, to move, to scale or to rotate the object that you draw.
To print the screen that you drew.
Undo
Undo canceling
To return to the last action.
To cancel the returning of the last action.
■
On-screen keyboard
Select icon to display the below on-screen keyboard. You can write text to a document via the "Mouse mode".
To exit the Software and Driver
■
If you want to exit the LightPen3 from the tool bar
1) Select the icon (exit icon) from the tool bar.
2) The confirmation screen displays and press "OK" to select.
■
If you want to exit the LightPen3 from the task bar
1) Click the icon (Mouse icon) from the task bar and select
2) The confirmation screen displays and press "OK" to select.
■
To exit SPDriver
Click the icon (SPD icon) from the task bar and select .
.
24
For Mac OS
(continued)
To uninstall the Software and Driver
1)
2)
Drag or drop the "SP Driver.app" and the "LightPen3.app" from the desktop to the recycle bin.
Select the "Empty trash" for the "Finder" menu.
25
"The SP device can not be found" message displays.
In this case, please check the followings.
(1) Confirm that the USB cable is connected securely and that the USB port is functioning properly.
z
If the following warning appears, connect the projector and the computer using the supplied USB cable, and then restart the program.
If the SPDriver icon appears in red as figures (A)/(C), the USB function is not working. In this case, Confirm that the USB cable is connected securely and that the USB port is functioning properly. The USB function performs normally when the icon becomes green as figures (B)/(D).
(A)
(B) (C) (D)
Attention:
Some antivirus softwares may disable the USB ports. Set such software to support the USB ports.
(2) Use the supplied USB cable together with the projector. If a longer USB cable is needed, contact your dealer for details.
(3) Confirm the USB port is functioning normally. Consult a qualified technician when it does not work.
Note:
When using a notebook computer, reduced battery capacity can result in USB ports not working. If this should occur, use AC power. Moreover, some notebook computers are unable to supply the standard current level of
500 mA from USB ports. In addition, some USB converters will not work properly. In such cases, use the supplied USB cable.
When the computer is restarted from standby mode, LightPen3 does not work.
When a computer is put into standby mode, its USB ports might be shut down. Quit the LightPen3 program once and then restart it.
The tip of the Pointer and the mouse cursor position are not the same.
This may be caused by one of the followings.
(1) Calibration was not conducted accurately.
(2) After calibration, the projector or screen was moved.
(3) The computer resolution was changed.
Recalibrate in any of these cases.
The mouse cursor jumps around regardless of the movement of the Pointer tip.
This may be caused by one of the followings.
(1) There might be interference from a strong light nearby. Block nearby light from reaching the screen.
(2) Since remote control use can cause malfunction, do not use the remote control when using the interactive functions.
26
Troubleshooting
(continued)
Under manual calibration, you can not proceed to next step even by clicking the cross mark.
(1) Check the followings.
z z
Is the Pen or Pointer have enough battery charge?
Is the tip of the Pointer or Pen in shadow on the screen? If the sensor cannot detect the LED in the tip of the Pointer or Pen, it will not function.
Do not put the Pen tip in shadow.
The recommended angle is 25º.
(2) The surrounding light might be too bright. Move light sources further away from the projector and screen.
It often happens in the following cases.
z z
Sunlight is entering through a window near the screen
There is a light source near the sensor or screen
(3) When using Windows Vista or Windows 7, the + mark at the bottom left of the screen might be hidden by the start icon. In this case, place the tip where you expect it to be and press the button.
"The ambient light is too bright to run the light pen system properly." message displays.
The surrounding light is too strong. Therefore, try to move the light source or change the location of the screen or turn off the light, also try to make use of the curtain.
27
Install the Linux dedicated SPDriver in the Linux system computer. The Drawing application dedicated for Linux is not included in the CD-ROM contents and the "Pen function" does not work. You can use the Pen or the Pointer as a PC mouse function on the projection screen.
System requirements
The computer must meet the following requirements in order to install the SPDriver.
OS
Linux OS Ubuntu v10.04, Debian v5.0, Suse v11
CPU
Memory
Intel Core 2 Duo 2.0 GHz or more
(dedicated GPU is recommended)
2 GB or more
Free space on the hard disk 100 MB or more
•
Note
Please notice that it is not guaranteed of the proper operations for system requirements other than the above mentioned requirements or for the self-made computers.
Even all the requirements are meet, there is not guaranteed operations for all computers.
Screen images used in these instructions are subject to change without notice.
How to install the Driver
1)
2)
Before installation, use a USB cable to connect the projector to the PC, and Start the computer with administrator privileges.
Insert the software recorded CD-ROM into the CD drive.
3)
4)
5)
Open the "LNX" folder and copy the "Linux.tar" on to the desktop.
Take the CD-ROM out from the CD drive.
Double click the "Linux.tar"
"Linux" "1-setup".
•
“SPDriver icon” and “Installed successfully“ messages display on the desktop.
28
Suffix (For Linux)
(continued)
Interactive functions initial settings
First, carry out the calibration for the projector sensor to accurately recognize the position of the projected screen.
■
Perform the Calibration of the camera
1) Connect the computer to the projector via a USB cable.
•
The SPDriver icon in the taskbar turns from red into green.
2)
3)
Click the "SPDriver" icon in the taskbar.
Choose the pop-up "Calibration".
•
The manual calibration screen displays.
4)
5)
Press the target mark
in the screen with the Pen.
•
Each time you press the target mark, the moving order is
.
Press the target mark
•
.
The “Please wait...” message appears, and after completing the process the message will disappear.
•
Note
When the position of the screen and the projector is fixed, there is no need for calibration again next time if you use the same computer at the same resolution.
To uninstall the Driver
1) Double click the "spdriver_UNINSTALL" on the desktop.
•
“Uninstalled successfully“ message will display when unistallation finishes.
29
Trademarks
•
•
•
Windows
®
, Windows Vista
®
, and Internet Explorer
®
are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
Intel, Pentium and Centrino are trademarks or registered trademarks of Intel Corporation and its subsidiaries in the United States and other countries.
Macintosh, Mac OS and Safari are the trademarks of Apple Inc. registered in the United States and other countries.
•
•
•
Linux is the trademark of Linus Torvalds in the United States and other countries.
PowerPC is the trademark of IBM Corporation.
Other company names, product names or other names noted in this manual are trademarks or registered trademarks of the respective companies. Note that ® and ™ marks are not indicated in the text of this manual.
•
•
•
Note
Unauthorized use or reproduction of part or all of this product software and manuals is strictly prohibited.
Panasonic cannot be held liable for any effects resulting from the use of this product software and manuals.
Panasonic reserves the right to revise this product software specifications and manual contents without notice.
Panasonic Corporation
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2013
M0513GC0 -ST
advertisement
Key Features
- Mouse function
- Pen function
- Dual Pen function
- PowerPoint Tool bar function
- Whiteboard tool
