Specimen Pass Through SPT24 Two door stainless steel cabinet facilitates the collection of lab samples while maintaining patient privacy. Interlock prevents both doors opening at same time. Smooth interior for easy cleaning. Mounting holes provided. Integral wall flange finishes wall opening. Optional opposing wall flange finishes wall on other side. SPT24247: 24”W, 24”H, 7”D Pass Thru for walls up to 6” thick. SPT242411: 24”W, 24”H, 11”D Pass Thru for walls up to 10” thick. SPT242417: 24”W, 24”H, 17”D Pass Thru for walls up to 16” thick. WF2424: 24”W, 24”H Wall flange. SPT24GD: Glass door window. CAR R C O R PO RATI O N [email protected] - 800 952 2398 carrcorporation.com - 12/13 - Page 1 Specimen Pass Through SPT24 GLASS DOOR OPTION can be added to one or both doors. Glass is tempered safety glass, 1/4” (.25”) thick. Option SPT24GD. CAR R C O R PO RATI O N [email protected] - 800 952 2398 carrcorporation.com - 12/13 - Page 2 SPECIMEN PASS THROUGH MODEL SPT24247, 7" DEEP MODEL SPT242411, 11" DEEP MODEL SPT242417, 17" DEEP DATE: 12/2/13 DRAWING NO.: 369 DRAWN BY: JJR 1. STAINLESS STEEL, TYPE 304, NO. 4 FINISH THROUGHOUT. 2. DOUBLE WALL THROUGHOUT. 3. DOOR, 1 EACH SIDE. 4. DOOR INTERLOCK, ALLOWS ONLY ONE DOOR TO BE OPEN AT ONCE, NOT SHOWN. 5. INTERLOCK PUSH BUTTON. 6. DOOR RELEASE. 7. DOOR KNOB. 8. PIANO HINGE. 9. MOUNTING HOLES. 10. WALL FLANGE, FIXED. 11. WALL FLANGE, ADJUSTABLE POSITION FRONT TO BACK TO ACCOMODATE VARIOUS WALL THICKNESS, OPTIONAL. 24" 6" 10" 16" 3/4" 25 1/2" 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 7" 11" 17" 25 1/2" Page 3 NOTE: ONLY ITEMS WITH MARKED BOXES INCLUDED. SUGGESTED WALL OPENING: 24 3/8" WIDE 24 3/8" HIGH 24" MAXIMUM WALL THICKNESS: SPT24247: 6" SPT242411: 10" SPT242417: 16" 369 Installation 1. Check local codes before beginning installation. 2. Cut wall opening to size: SPT12: 12 3/8" x 12 3/8". SPT24: 24 3/8" x 24 3/8. Frame opening at least on sides. 3. Insert cabinet into opening. Drill through provided mounting holes into wall studs. Insert appropriate mounting screws into holes and tighten. 4. On the opposite side of wall, slide optional adjustable wall flange over the cabinet and against wall. Mark hole locations on wall, remove the flange and drill holes. Replace wall flange and screw in place with appropriate screws. Carr Specimen Pass-through Installation, Operation & Maintainance Manual No. 360 Revised 12/13 12 12 12 12 Top view 1 1 1 12345 12345 1 1 1 1 12 12 12 12 12345 12345 Optional adjustable flange screwed to wall Wall board Fixed flange Studs Operation The cabinet maintains patient privacy by locking one door when the opposite door is open. To open door, push button and turn handle. If button will not push, the opposite door is open, wait for it to be closed and try again. Mounting screws Wall board 1234567 1234567 2" Provided holes for mounting screws 123 Front view 1 11 1 11 1 1 11 1 1 11 1234567 1 1234567 1 11 1 1 11 1 1 11 1 1 11 123 123 123 Side view Maintenance The cabinet is maintenance free. To clean, use a mild detergent with water and a clean cloth. Apply, then wipe off a light coat of mineral oil to make the stainless steel shine. 360 Established 1946 1547 11th Street Santa Monica, CA USA 90401 310 587 1113 800 952 2398 carrcorporation.com [email protected]
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021