MACROM M-DVD 5566 car media receiver User manual

USER MANUAL

M-DVD5566

M-DVD5566 User manual_ENG.indd 1 22/12/2014 17:16:06

Safety Precautions

Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After you’ve finished reading the instructions, keep this manual in a safe place for future reference.

Please don't change the fuse on the power cord without professional guidance, using improper fuse may cause damage to this unit or even cause fire.

Only connect the unit to a 12-volt power supply with negative grounding.

Please contact your nearest dealer if one of the following symptoms is experienced:

Never install this unit where the operation & condition for safe driving is impaired.

(a). Water or other objects enters the unit.

(b). There is smoke.

(c). Peculiar smell.

Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accident except for using rear view video camera.

To ensure safe driving, please adjust the volume to a safe and comfortable level in case of emergency situations.

OK

OK

MUTE

MUTE

OK

OK

MUTE

MUTE

Never expose this unit, amplifier, and speakers to moisture or water to prevent electric sparks or fire.

- 1 -

M-DVD5566 User manual_ENG.indd 1

OK

MUTE

22/12/2014 17:16:07

OK

MUTE

Safety Precautions

1. Never disassemble or adjust the unit without any professional guidance.

For details, please consult any professional car shop / dealer for inquiry.

2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the monitor.

3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. If no relevant information is found, please press the [RESET] key on the front panel to resume factory default.

4. If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal before operating the unit.

5. Using the car heater in low temperature environment may result in moisture inside the unit, DO

NOT use the unit in this situation. Eject the disc and wipe off the moisture on the disc. If the unit still doesn't work after a few hours, please contact the service center.

6. Do not impact the LCD monitor which could cause damage.

7. To prevent damage to the screen, avoid touching it with sharp objects.

8. To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations are used.

However, some illustrations are different from the actual images displayed on the screen.

9. Operate the unit correctly according to this manual to prevent unnecessary problem. The guarantee won't be valid if the problem is caused by inappropriate operation.

Expanding System

Expanding audio feautres Expanding visual feautres

Rear

Monitor

Rear vision

Monitor

Power Amplifier

SD Card

VOL

USB memory

Portable player

(connected via AV Input)

Note:

The items listed outside of the frame are the commercial products generally sold.

Bluetooth cellular phone

- 2 -


Contents

Safety Precautions ....................................1-2

Contents ........................................................ 3

Produc overview ........................................... 4

Front Panel ............................................... 4

Remote control overview ............................. 5

Remote battery ............................................. 6

Basic Operations .......................................... 7

Detect parking brake................................ 7

Mute .......................................................... 7

Power On / Off .......................................... 7

Audible Beep Confirmation ...................... 7

Playing Source Selection ......................... 7

EQ Menu.................................................... 8

Select Preset Equalizer ............................ 8

Adjust EQ Parameters .............................. 8

Adjust FAD BAL ....................................... 8

Set Date .................................................... 9

Set Clock Mode ......................................... 9

Set Time .................................................... 9

Radio Mode ................................................. 10

Tuner TFT Display .................................. 10

Select Radio as Playing Source ............. 10

Select One Radio Band ........................... 10

Tune the radio......................................... 10

Preset Station ......................................... 11 local Seeking .......................................... 11

RDS Basics ............................................. 11

Adjust RDS Settings ............................... 11

RDS ( Radio Data System ) ..................... 12

AF Function ............................................. 12

EON ( Enhanced Other Networks ) ........ 12

TA Function ............................................. 12

CT (Clock Time) ...................................... 12

PTY Function ........................................... 12

Playback Mode ........................................... 13

Load a Disc ............................................. 13

Eject a Disc ............................................. 13

Touch Screen Controls .......................... 13

Controlling Playback .............................. 13

Connect a USB Device ............................ 13

Remove a USB Device ............................ 13

Insert a SD/MMC Card ........................... 13

Remove a SD/MMC Card........................ 13

Play/Pause .............................................. 13

Previous/Next ......................................... 13

Search for a Folder ................................ 14

Repeat ..................................................... 14

Repeat A-B ............................................. 15

Shuffle (Random) Play ............................ 15

Select Audio Mode .................................. 15

Select Subtitle Language ....................... 15

Playback Information ............................. 16

Direct Track Entry .................................. 16

Rotate Pictures ....................................... 16

Zoom ....................................................... 16

Video Setup ............................................. 16

Bluetooth Mode .......................................... 17

Pair the Bluetooth-enabled Devices...... 17

Disconnect Bluetooth Device ................. 17

Make a Call ............................................. 17

Receive a Call ......................................... 18

Adjust Bluetooth Settings ...................... 18

Bluetooth Musci Mode ........................... 18

Settings ....................................................... 19

General settings ..................................... 19

Calibration .............................................. 19

Video settings ......................................... 19

Sound settings ........................................ 20

Time settings .......................................... 20

Language settings .................................. 20

Bluetooth settings .................................. 20

DVD settings ........................................... 21

Volume settings ...................................... 21

Other Modes ............................................... 22 ther Devices ............................................ 22

Reset ....................................................... 22

Replace a Fuse ....................................... 22

Navigation (GPS) ..................................... 22

SWC Programming ................................ 22

Specifications ............................................. 23

Region Code ........................................... 24

Cautions when using Discs .................... 24

Troubleshooting ......................................... 25

Wire Connections ....................................... 26

- 3 -


5

6

7

8

Product overview

Front Panel

11

3

4

1

2

VOL

10 9

Notice:

The graphic in this manual is for reference only, and may be different from the actual unit.

1. [ ] Button

Press to eject a disc.

2. [MENU] Button

Press to switch between the available audio/video sources applied to the unit.

3. [VOL/ / ] Knob

Rotate to adjust the volume.

Press momentarily to activate the MUTE function. Press again to resume normal

listening.

Press to turn the unit ON. Press and hold to turn the unit OFF.

4. Reset Button

Press to reset system settings to factory default (except password and parental lock

settings).

5. SD Interface Connector

Insert an SD card for playback of music/video files.

6. Map Slot

The Mini SD card is used for the Navigation Map only, not for music or other files.

This may be used for firmware updates if required.

7. A/V Input

Accepts a 3.5mm jack through which signals from various audio/video devices can be

applied to the unit.

8. USB Connector

Connect a USB device for playback of music/video files.

9. Remote Sensor (optional)

10. Disc slot

11. Internal Microphone

Internal microphone for Bluetooth calls.

- 4 -


1

2

5

6

7

8

3

4

9

10

11

12

Remote control overview

Front view

13

14

28

29

30

31

15

16

17

18

19

20

21

22

23

24

25

26

27

1. Return to the home menu

2. Eject the disc

3. Access to tuner source

4. Access to disc source

5. Search an available radio station by decreasing tuning frequency

Select the previous chapter/track for playback

6. Select radio band

7. Zoom in (Picture menu)

Access to music list

8. Adjust screen settings

9. Open EQ menu

10. Menu cursor

11. Enter

12. Open route menu (DVD)

Turns on/off PBC (VCD)

13. Digit area

14. Repeat playback

15. Change to next source

16. Power on/off

17. Access to Bluetooth source

18. Access to navigation source

19. Pause playback/Start playback

20. Search an available radio station by increasing tuning frequency

Select the next chapter/track for playback

21. Playback disc in different angle for a scene

(DVD)

Rotate (photo playing)

Access to video list

22. Language selection for subtitle (DVD)

Access to photo list

23. Change the audio language for disc playback

(DVD)

24. Increase/Decrease volume

25. Access to settings source

26. Mute on/ off audio output

27. Activate direct access mode

28. Dial/Receive a call

29. Hang up

30. Play all chapter/tracks in random order

31. Press to clear the number one by one

Hold to clear all the numbers

- 5 -


Remote battery

Notes of remote control using

1) Aim the remote control at the remote sensor on the unit.

2) Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer.

3) DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly.

4) The battery can work for 6 months under normal condition. If the remote control can't work, please change the battery.

5) Use“button shaped” lithium battery“CR2025”(3V) only.

6) DO NOT recharge, disassemble, heat or expose the battery in fire.

7) Insert the battery in proper direction according to the ( + ) and ( - ) poles.

8) Store the battery in a place where children cannot reach to avoid the risk of accident

Back view

Uninstall Battery

Slide out the battery compartment tray at the bottom on the back of the remote control.

Install Battery

Use button-shaped lithium battery CR2025

(3V)” only. Insert the battery to the battery tray with proper direction according to the (+) and

(-) poles.

PULL OUT

- 6 -

PUSH IN


Basic Operations

Detect parking brake

• Connect the cable "BRAKE" to the parking brake switch to view video files on the TFT monitor.

Engage the parking brake for viewing videos.

• When the parking brake is not engaged, the monitor displays "Warning!!!, Video playback is disabled for your safety. Engage parking brake to watch video.", preventing the driver to watch content while driving. The rear screens are not interested in this inhibition.

Mute

Press [

VOL/ /

] knob to mute the volume from the unit. Press again to restore the volume. [

] is displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute function.

Power On / Off

Press the [

VOL/ /

] knob on the unit to turn the unit on. The buttons on the front of the unit light up for a moment and the current mode status appears in the LCD.

Press and hold the [

VOL/ /

] knob to power off the unit.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through the

Setup menu.

Playing Source Selection

Press the [ MENU ] button on the front panel to change between available playing sources. The playing mode is displayed on the screen.

1. 1/2 or 2/2: Touch this page button to view the first or second page of on-screen buttons

2. Function icons

3. Clock

4. Touch for quick access to Equalizer level settings


1 2 3 4 1

- 7 -

22/12/2014 17:16:09

Basic Operations

EQ Menu

The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements.

Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.

Select Preset Equalizer

1. Enter the EQ setup mode

Touch the [ ] icon in the user interface and the

EQ setup interface will display on the screen.

2. Select EQ mode

Touch the desired EQ selection: [ Optional ] /

[ Classic ] / [ Rock ] / [ Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will change.

Adjust EQ Parameters

To adjust EQ parameters, touch and drag the parameters adjustment bar.

[ User ]: Set the desired audio effect.

[ Flat ]: Select the original audio effect.

[ Reset ]: Cancel the equalizer function settings.

[ Loud: On/Off ]: When listening to music at low volumes, this featurewill selectively boost certain bass and treble frequencies.

Adjust FAD BAL

You can adjust front/back/left/right balance of the speaker and the subwoofer volume to get balanced listening effect according to the surroundings and your interest.

1. Enter the EQ setup mode

Touch the [ ] icon in the user interface and the EQ setup interface will display on the screen.

2. Adjust subwoofer volume

Touch [ ] / [ ] or drag [ ] to adjust subwoofer volume from -12 to +12.

3. Adjust fader / balance value

Touch [ ] / [ ] / [ ] / [ ] to adjust fader / balance value from -20 to +20.

[ ]: Front speaker

[ ]: Rear speaker

[ ]: Left speaker

[ ]: Right speaker

Notes:

1. The parameters of the EQ modes has been preset and you can not change them besides ‘User’.

2. The EQ mode will change to ‘User’ automatically when you adjust the frequency value under the modes besides ‘User’.

3. The value of Sub is independent of EQ mode and can be adjusted separately.

- 8 -


Setting Date /Time

1. Touch [ Settings].

2. Touch [ Time ].

The date/time setup menu is displayed.

Set Date

1. Touch [ Date ].

2. Touch the date information on the screen .

A submenu is displayed.

3. Touch [ ] or [ ] to set year, month and day.

Set Clock Mode

1. Touch [Clock mode].

2. Touch [12Hr] or [24Hr] to switch clock mode.

Set Time

1. Touch [ Time ].

2. Touch the time on the screen, a submenu is displayed.

3. Touch [ ] or [ ] to set hour and minute.

4. When date/time is set, touch [ Save ] to confirm or [ Cancel ] to exit.


- 9 -

22/12/2014 17:16:10

Radio Mode

Tuner TFT Display

1. Touch to view the MENU and select a new playback source

2. Strong Local signal broadcasting indicator

3. Stereo broadcasting indicator

4. Current radio band indicator

5. Broadcaster information stored at the preset

6. Touch to view more on-screen buttons

7. Touch to seek backward

8. Touch for quick access to EQ level settings

9. Touch to seek forward

10. Touch to change between AM/FM bands

11. Clock

12. Current preset radio station

13. Current radio information

14. AF: Alternative Frequency indicator

15. TA: Traffic Announcement indicator

16. RDS setting options

17. Save the desired radio station

18. Touch to change between Local and Distance

19. Enter frequency directly

20. Search stations automatically

5

6

1

7 8

TA

2 3 4

9 10

16 17 18 19 20

Select Radio as Playing Source

Open the Source Menu and then touch [Radio].

Select One Radio Band

Touch the [ ] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and

AM2.

Tune the radio

Auto Tunig

During auto tuning, the frequency will be changed in seek mode.

Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.

Note: When a station is received, searching stops and the station is played.

Manual Tuning

Method 1:

Touch and hold [ ] / [ ] icon on the user interface more than 1 second to changed in steps higher / lower station. Repeat the operation to change step by step.

Method 2:

1. Touch the numeric keypad icon [ ].

Numeric keyboard is displayed, touch number to

input frequency.

2. Touch [ ] to delete the input number step by step.

3. Touch [ OK ] to enter.

11

12

13

14

15

- 10 -


Radio Mode

Preset Station

The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations; the unit can store 30 stations in total.

Search Stations Automatically

Touch [ ] to search station and store 6 strongest stations in current band automatically.

Manual Store

1. Tune to a station.

2. Touch [ ].

3. Touch one of the channels P1 to P6 to save the select band.

Tune to a Preset Station

1. Touch [Radio].

2. Select a band (if needed).

3. Touch one of the preset channels (P1 to P6) on the screen.

Local Seeking

Touch the [ ] icon and choose the Radio Local or Distance.

When the [ ] icon turns bright, only stations with a strong signal strength will be detected .

Default is “Distance”.

EQ Selection

Press the [ ] icon and enter the EQ setup.

RDS Basics

RDS transmits data to the radio which displays information such as name station, song artist, and song title.

RDS service availability varies with areas.

Adjust RDS Settings

1. In Radio menu, touch [ ].

The option menu is displayed.

2. Touch on the selected option to change the setting.

[RDS]: To turn on or off “RDS” function.

[CT]: To turn on or off “Clock Time” synchronization function.

[EON]: To turn on or off “EON” function.

[TA]: To turn on or off “TA” function.

[PTY]: To show PTY list.

[ VOL]: Touch [ ] / [ ] to adjust TA volume.

- 11 -


Radio Mode

RDS ( Radio Data System )

The unit provides basic functions of RDS.

RDS service availability varies with areas. Please verify if RDS service is available in your area.

AF Function

Alternative Frequencies Lists are used in conjunction with the PI code (Program Identification code)to assist automatic tuning.

Using this information, the radio can automatically search out another frequency of the same station.

Note:

• During auto switching radio frequency, some interference may be heard..

• Turning off AF function can settle this problem.

EON ( Enhanced Other Networks )

When EON data is received, the EON indicator lights and the TA and AF functions are enhanced.

TA: Traffic information can be received from the current station or stations in other network.

AF: The frequency list of preset RDS stations is updated by EON data. EON enables the radio to make fuller use of RDS information. It constantly updates the AF list of preset stations, including the one that currently tuned into.

TA Function

The TA (Traffic Announcement) function lets the unit receive traffic announcements automatically.

The TA function can be activated by a TP (Traffic Program) station broadcasting traffic information.

When TA is activated and a traffic announcement is received, the current playing source will be overridden by the traffic announcement The unit returns to the original source after the traffic announcement has been received.

CT (Clock Time)

Some stations broadcast the time and date within the encoded RDS signal. The clock time is automatically adjusted when ‘CT’ is set to ‘ON’.

PTY Function

PTY is an abbreviation for the type of program defined by a code to define the program being broadcast (eg news or Rock).

The Options of PTY is displayed on the screen. To see the options PTY, tap the scroll bar and arrows on the screen.

When an option is selected PTY (eg News), the radio unit, the PTY search available. If the PTY requested was not found, the unit returns to the original radio frequency.


- 12 -

22/12/2014 17:16:12

Playback Mode

Load a Disc

You can play video, audio or images stored on the following discs:

• DVD Video, DVD-R, DVD-RW

• VCD

• Audio CD, CD-R, CD-RW

Note:Ensure that the disc contains playable content.

Eject a Disc

Press the [ ] key on the front panel to eject the disc. When the disc is ejected, the unit switches to the previous source.

Touch Screen Controls

The touch key areas for DVD playback are outlined below:

A: Return to the main menu

B: Play the video and display playback information

C: Display onscreen control menu

D: Time display

A B

C

Controlling Playback

To access the on-screen controls, touch the screen except upper left corner, and touch again to cancel display. Touch [ ] to view all function icons.

Connect a USB Device

1. Open the USB door.

2. Insert the small end of the USB cable to mini USB socket, then connect the other end of the cable to your USB device.

Remove a USB Device

1. Select other source on the main menu.

2. Remove the USB device.

Insert a SD/MMC Card

1. Open SD/MMC card cover.

2. Insert the SD/MMC card into the SD/MMC card slot.

Play starts automatically.

Remove a SD/MMC Card

1. Select other source on the main menu.

2. Press the SD card to remove it.

Play/Pause

1. Once a disc, USB or SD/MMC card is inserted, play starts automatically.

For DVD movie, if a menu appears, press [ ] to start play.

2. To pause, touch [ ].

To resume play, touch [ ].

3. Skip to previous / next track / chapter, press [ ] / [ ] key.

Previous/Next

Touch [ ] / [ ] key on the screen to skip to previous / next track / chapter.

- 13 -


Playback Mode

Search for a Folder

For Audio Files

1. Touch [ ] to display all available audio folders.

2. Touch a folder,then touch the desired file.

3. Touch the file again to start play.

For Video Files

1. Touch [ ] to display all available video folders.



For Picture Files

1. Touch [ ] to display all available picture folders



For Folder Control

1. Touch [ ] to display all available folders


3. Touch the file again to start play

Repeat

For DVD/VCD movie disc:

1. Touch bottom half of the screen to display menu on the screen.

2. Touch [ ] to display the 2nd menu.

3. Touch [ ] repeatedly to select:

DVD

[ ] Repeat chapter: Play the current chapter repeatedly.

[ ] Repeat title: Play all chapters in the title repeatedly.

[ ] Repeat off: Play all in the all repeatedly.

[ ] Repeat off: Cancel repeat play.

VCD

[

1

] Repeat single: Play the current single repeatedly.

[ ] Repeat all: Play all in the all repeatedly.

[ ] Repeat off: cancel repeat play.

- 14 -


Playback Mode

For CD/MP3 files:

1. Touch anywhere except the upper left corner to display menu on the screen.

2. Touch [ ] repeatedly:

[

1

] Repeat single: Play the current single repeatedly.

[ ] Repeat all: Play all in the all repeatedly.

[ ] Repeat off: Cancel repeat play.

Repeat A-B

You can repeat a specific of video file (from A to B).

1. Touch the screen to display control menu, if necessary.


3. Touch [ A-B ] repeatedly to mark:

Repeat A-: the start of the section to repeat.

Repeat A-B: the end of the section to repeat.

The selected section plays repeatedly.

4. To exit A-B repeat mode, touch A-B repeatedly, [Repeat A-B off] is displayed.

Shuffle (Random) Play

You can play audio tracks/files in random order.

1. Touch the screen to display control menu, if necessary.

2. Touch [ ] to display the 2nd menu, if necessary.

3. Touch [ ] on the screen repeatedly to turn random play on or off.

Select Audio Mode

When you play VCDs, you can select an audio mode (R/L/Stereo).

1. During play, touch bottom half of the screen to display menu on the screen, if necessary.


Touch [ ] repeatedly until the audio mode is selected.

Select Subtitle Language

For DVD or Divx discs that contain two or more subtitle languages.

1. During play, touch the screen to display menu on the screen, if necessary.


3. Touch [ ] repeatedly to select a language.

The selected language is displayed.


- 15 -

22/12/2014 17:16:13

Playback Mode

Playback Information

Touch the screen when playing back DVD and VCD discs and the playback information will be displayed on the top area of the TFT.

For DVD

1. Disc type.

2. DVD Title information. “01/08” indicates that this DVD has

8 titles and the title playing back now is the first title.

3. DVD Chapter information. “005/012” indicates that current title has 12 chapters and the chapter playing back now is the fifth chapter.

For VCD

1. Disc type.

2. VCD Track information. “01/08” indicates that this VCD has 8 tracks and the track playing back now is the first track.

Elapsed Time

1. Elapsed time of the current track.

2. Total time of the current track.

00:01:20

1

Direct Track Entry

To select a track directly, touch the [ ] icon on screen control to display the direct entry menu. Enter the desired track using the on-screen number pad. Press [ OK ] to the selected track.

DVD T:01/08 C:005/012

1

1

2

2

3

VCD Track:01/08

00:30:17

2

Rotate Pictures

1. When you view pictures, touch the screen to display menu on the screen, if necessary.


3. Touch [ ] repeatedly to rotate the picture.

Zoom

You can zoom in pictures for a close view.

1. When you view pictures, touch the screen to display menu on the screen, if necessary.


3. Touch [ ] repeatedly to zoom in the picture.

Video Setup

Touch [ ] to access video setup mode, touch [ ] or [ ] to set the desired effect.

You may set the brightness, contrast, saturation, and hue of the video output from 1 to 20.

- 16 -


Bluetooth Mode

You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetooth-enabled device.

Pair the Bluetooth-enabled Devices

To connect your Bluetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. You can pair up to five devices.

1. Turn on the Bluetooth function on the device.

2. Touch [ ] to search for Bluetooth device with the unit.

3. Start scanning on the Bluetooth device and select the

unit “M-DVD5566”

4. Enter default password “0000”.

Tip:

• The operational range between this unit and a Bluetooth device is approximately 5 meters .

• Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device.

• Compatibility with all Bluetooth device is not guaranteed.

• Any obstacle between this unit and a Bluetooth device can reduce the operational range.

• Keep this unit away from any other electronic device that may cause interference.

Disconnect Bluetooth Device

To disconnect one device, touch [ ] .

Tip

• The device will also be disconnected when the device is moved beyond the operational range.

• If you want to reconnect the device to the unit, place it within the operational range.

• If you do not want to reconnect the device to the unit automatically, touch [ ],

then set [ Auto connect ] to [ Off ]. For details, see the “Adjust Bluetooth Settings” section.

Make a Call

1. Select Bluetooth function in the home menu.

2. Pair the phone with the unit.

3. Search for phone number from the following list:

[Phone Book]

[Call Log]

[Missed calls]

[Received calls]

[Dialed calls]

Or touch the number pad directly, then touch [ ] to dial.

- 17 -


Bluetooth Mode

Receive a Call

By default, all incoming calls are received automaticaly.

1. If there is an incoming call, the screen will appear

“Incoming”.

2. You may touch the screen to select [ hang up ] or

[ Answer ].

Tip

• You can select to receive calls manually by set [Auto answer] to [Off] status.

Adjust Bluetooth Settings

1. In Bluetooth menu,touch [ ].

The option menu is displayed.

2. Touch on the selected option to change the setting.

∙ [Bluetooth]: To turn on or off “Bluetooth” function.

∙ [Auto connect]: To turn on or off “Auto connect” function.

∙ [Auto answer]: To turn on or off “Auto answer” function.

∙ [Pairing code]: To set paring code.

∙ [Phone book sync]: To synchronize phone book, touch

[ OK ] on the sub-menu popped out.

Phonebook sync may take several minutes to load on

initial setup.

Tip

• You can also adjust Bluetooth settings in the “Settings” menu.

Bluetooth Music Mode

A2DP

A2DP is short for Advanced Audio Distribution Profile. The mobile phones supporting this function can transmit stereo audio, whereas the ones not supporting this function can transmit mono audio only.

AVRCP

AVRCP is short for Audio/Video Remote Control Profile.

The mobile phones supporting this function can control the playback of a Bluetooth audio player.

In the mode of the music player working, if you want to make a phone call, you can press the number keys on the mobile phone. At the same time the music player will stop. The TFT screen will display “Calling”, after the call received, the voice will be transferred to the unit. When the call ends, the screen will display music playing menu.

If there is an incoming phone call, the music player will stop, and the screen will display “Incoming”.

When the call ends, the screen will display music playing menu.

- 18 -


Settings

General Settings

1. Touch [ General ] in the settings page.

2. Touch to highlight a setting.

3. Touch on the option to display/select an option.

4. Touch [ ] or press the Menu button on the front panel to exit.

General settings Options

USA

China

Japan

Radio region

Europe

Europe (LW)

OIRT

Local

Radio range

Blackout

Dimmer mode

Distance

Off/10s/20s

Low/Medium/Normal/High

Description

Select one that matches your location.

Beep

Calibration

On

Off

Start

Adjust the display brightness.

Turn on the beep sound. Each time you press a button, the unit beeps.

Turn off the beep sound.

Calibrate the touch screen.

Calibration

When the touch operation is not sensitive or valid, you should calibrate the touch screen through calibration setting function.

Adjust the response positions of the touch panel as followings:

1. Press the [ Calibration ] option on the setup menu to enter.

2. Touch [ Start ] to enter.

3. Aim at center of [ + ], follow the path as shown of the figure, after steps from 1 to 5, touch anywhere on the screen to save and exit from calibration. Or wait for 30 seconds to exit without making changes.

Video Settings

1. Touch [Video].

2. Touch an option repeatedly to select:


Video settings

Detect parking brake

Options

On

Off

Description

Disable video

Enable video

When detect parking brake is set to“On” , the screen will display [ Warning!!!” Video playback is disabled for your safety. Engage parking brake to watch video] The above warning screen will prevent the driver watching images.

- 19 -


Settings

Sound settings

1. Touch [Sound].



Sound settings

Subwoofer

Subwoofer filter

Options

On

Off

80Hz

120Hz

160Hz

Description

Turn on the subwoofer.

Turn off the subwoofer

Select subwoofer filter criteria.

Time settings

1. Touch [ Time ].



Time settings

Date

Clock

Time

Options

Y/M/D

Description

Touch [ ] or [ ] to set year, month and day.

12Hr/24Hr Touch [12Hr] or [24Hr] to switch clock mode.

H / M / A M /

PM

Touch [ ] or [ ] to set hour and minute.

Touch [ ] or [ ] to set AM/PM (only for 12Hr).

Language settings

1. Touch [Language].

2. Touch an option repeatedly to select.


Language settings

OSD

DVD audio

DVD subtitle

Disc menu

Description

Select on-screen display language.

Select DVD audio language. Options available depend on DVD disc.

Select DVD subtitle language. Options available depend on DVD disc.

Select DVD menu language. Options available depend on DVD disc.

Bluetooth settings

1. Touch [Bluetooth].



Bluetooth settings

Bluetooth

Auto connect

Auto answer

Pairing code

Microphone

Options Description/Note

On

Off

Turn on the Bluetooth function.

Turn off the Bluetooth function.

On

If the pre-paired device is within the effective range, the unit re-connects to pre-paired device automatically.

Need to re-connect manually.

Off

On

Off

Answer paired phone call automatically.

Answer phone call manually.

Set the password for pairing the unit with other Bluetooth device.

Internal or External Before setting, make sure that the external microphone is installed.

- 20 -


Settings

DVD settings

1. Touch [DVD].



DVD settings

Set password

Rating level

DRC

Load factory

Options Description

Set password to restrict the play of discs. The default password is 0000.

Kid safe Acceptable for children.

G

PG

Acceptable for general viewers.

Parental guidance suggested.

PG-13

PG-R

R

NC-17

Unsuitable for children under age 13.

Recommend parents to restrict children under 17 to view.

Restricted recommend parents to guide children under 17 to view.

Unsuitable for children under age 17.

Adult

On/Off

Acceptable for adults only.

Dynamic range compression on or off.

Restore to default settings.

Volume settings

You can set different volume for different modes.

1. Touch [Volume].

2. Touch on a source.

[DVD]

[F-USB]

[Bluetooth]

[F-USB]

[AV-IN1] (front) [SDHC]

[AV-IN2] (rear, optional)

[Radio] [Navigation]

3. Touch [ ] or [ ] to assign value: -6 to 6.

When switching to the source, the volume increases or decreases automatically.



- 21 -

22/12/2014 17:16:17

Other Modes

Other Devices

You can connect an external audio/video device to the unit.

1. Connect the external device with the supplied AV cable.

2. Touch the upper left corner to display the main menu.

3. Touch [AV1] front input or [AV2] rear input.

Reset

When the unit hangs up, you can reset it.

Press [ RESET ] with a ball-point pen or similar tool.

Tip:

When the unit has been reset, all the settings will return to default settings.

VOL

Reset

Replace a Fuse

If there is no power, the fuse may be damaged and need to be replaced.

1. Take out the unit from dashbpard.

2. Check all electrical connections.

3. Buy a fuse that matches the amperage of the damaged fuse.

4. Replace the fuse while the units power is disconnected.

Navigation (GPS)

1. Touch the upper left corner to display home menu.

2. Touch [Navigation], to start the navigation software.

3. For instructions on using of navigator, refer to the manufacturer’s user manual.

Nota:

While Navigation is running, you can view the previously selected source by holding the [MENU] button. Press again and hold the [MENU] button to return to the navigation mode.

Where it was used the Bluetooth function you can display the navigation following the procedure described above.

Steering Wheel Control Programming

1. Touch the upper left corner to display home menu.

2. Touch [ SWC ], the SWC menu will display.

3. Select the keys corresponding to the functions of steering wheel controls by tapping the KEY and define the desired function.

4. Touch [ Pair ] to program.

5. Press each individual steering wheel control button for each corresponding function.

6. Once the final steering wheel control button is programmed, the functions are saved and the programming will end.

7. Touch [ Reset ] to reset the programming.

- 22 -


Specifications

General

Reference Supply Voltage ....................................................................................................... 12V(DC)

Operating Voltage Range ...........................................................................................10.5 - 15.8V(DC)

Max Operating Current ................................................................................................................... 15A

Grounding System ..................................................................................... Car Battery Negative Pole

Dimensions(WXHXD) .......................................................................................... 178X101.5X160.5mm

Weight(main unit) ...................................................................................................................... 1.75kg

FM

Signal Noise Ratio ....................................................................................................................

≥55dB

Residual Noise Sensitivity (S/N=30dB) ..................................................................................18dBμV

Frequency Response (±3dB) ...................................................................................... 20Hz~12.5KHz

Station Seeking Level .......................................................................................................20~28dBμV

Distortion ..................................................................................................................................

≤1.0%

Stereo Separation (1KHz) .........................................................................................................

≥25dB

Antenna Impedance ......................................................................................................................75

Ω

AM

Residual Noise Sensitivity (S/N=20dB) ..................................................................................30dBμV

Selectivity (±9KHz) ....................................................................................................................

≥50dB

LCD

Screen size ................................................................................................................ 6.2 inches(16:9)

Display resolution .......................................................................................................... 800X480dots

Contrast radio ............................................................................................................................... 400

Brightness .......................................................................................................................... 280cd/m2

DVD Player

Signal / Noise Ratio ....................................................................................................................80dB

Dynamic Range ...........................................................................................................................80dB

Distortion (line out) ...................................................................................................................

≤0.1%

Frequency Response (±3dB) ......................................................................................... 20Hz~20KHz

Maximum Output Power ......................................................................................................... 4×45W

Load Impedance ............................................................................................................................ 4 Ω

AUX IN

Distortion ..................................................................................................................................

≤0.5%

Frequency Response (±3dB) ......................................................................................... 20Hz~20KHz

Audio Input Level ......................................................................................................................1Vrms

Audio

Audio Output Impedance ............................................................................................................100

Ω

Audio Output Level ..........................................................................................................2Vrms(Max)

Video

Normal Video Input Level (CVBS) .........................................................................................1.0±0.2V

Video Input Impedance .................................................................................................................75

Ω

Video Output Impedance ..............................................................................................................75

Ω

Video Output Level .................................................................................................................1.0±0.2V

Environment

Operating Temperature ...............................................................................................-10°C ~ +60°C

Storing Temperature ...................................................................................................-20°C ~ +70°C

Operating Humidity ........................................................................................................ 45%~80%RH

Storing Humidity ............................................................................................................ 30%~90%RH

Notice:

When the unit is operated to extremes, such as with maximum power output for a long time, or the temperature is over 70°C, it will enter heat protection mode, the volume will be reduced automatically. This is normal.

- 23 -


Specifications

Supported Formats:

• USB or memory file format: FAT16,FAT32

• Mp3 bit rate(date rate): 32-320 Kbps and variable bit rate

• Directory nesting up to a maximum of 8 levels

• Number of albums/folders: maximum 99

• Number of tracks/titles: maximum 999

• ID3 tag v2.0 or later

• File name in Unicode UTF8(maximum length:128 bytes)

Unsupported Formates:

• Empty albums:an empty album is an album that does not contain MP3 files,and is not be shown

in the display.

• Unsupported file formats are skipped.For example,Word documents(.doc) or

Mp3 files with extension.dlf are ignored and not played.

• AAC,WMV,PCM audio files

Supported MP3 Disc Format:

• ISO9660,Joliet

• Maximum title number: 512(depending on file name length)

• Maximum album number: 255

• Supported sampling frequencies: 32kHz,44.1kHz,48kHz

• Supported Bit-rates: 32-320Kbps and variable bit rate

Supported Video Formats:

• DVD

• MP4

•Xvid (optional)

Region Code

According to DVD sale region, the whole world is divided into six regions. A DVD disc can be played back only when its region code is compatible with that of the player in use.

Region 1: USA, Canada, East Pacific Ocean Islands;

Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;

Region 3: Taiwan of China, Hong Kong of China, South Korea, Thailand, Indonesia, South East Asia;

Region 4: Australia, New Zealand, Mid & south America, South Pacific Ocean Islands/Oceania;

Region 5: Russia, Mongolia, India, Middle Asia, East Europe, North Korea, North Africa, North West

Asia;

Region 6: Chinese Mainland.

Cautions when using Discs

1) DO NOT use irregular shaped disc.

2) Disc Cleaning

Use a dry, soft cloth to wipe the disc from center to edge, only neutral detergent can be used.

3) When playing a new disc

New disc may have some rough spots around the inner and outer edges. If such a disc is used, remove these rough spots with a pencil or ball-point pen, etc.

- 24 -


Troubleshooting

What appears to be trouble is not always serious. Please check the following points before calling a service center.

Problem

Unit can not power on

No/low audio output

Cause

General

Unit fuse blown.

Car battery fuse blown.

Illegal operation

Improper audio output connection.

Volume set too low.

Speakers damaged.

Heavily biased volume balance.

Poor sound quality or distortion

Unit resets itself when engine is off

Speaker wiring is in contact with metal part of car.

Pirated disc is in use.

Speaker power rating does not match unit.

Wrong connections.

Speaker is shorted.

Incorrect connection between ACC and BATT.

TFT monitor

Warning information is shown at all times

Flashing image or interference appears on screen

Cannot insert disc

Disc does not play back

PBC cannot be used during

VCD playback

Repeat or search function is invalid during VCD playback

Parking break wiring is not correct.

The color system of DVD disc does not match the monitor.

Pirated disc is in use.

Video cable damaged.

Improper video signal connections.

Disc playback

A disc is already inside the unit.

Disc is warped or scratched.

Disc is dirty or wet.

Incompatible disc is used.

Disc is inserted upside down.

Disc region code is not compatible with unit.

PBC is not available on the disc.

PBC is on.

Corrective action

Install new fuse with correct rating.

Install new fuse with correct rating.

Reset the unit.

Check wiring and correct.

Increase volume level.

Replace speakers.

Adjust the channel balance to center position.

Insulate all speaker wiring connections.

Use original disc.

Replace speakers.





Adjust the color system of the DVD disc playing back or the monitor in use.

Use original disc.

Replace cables.


Eject current disc and insert new one.

Use disc in good condition.

Clean disc with soft cloth.

Use compatible disc.

Insert disc with label side up.

Use disc with proper region code.

Use disc with PBC available.

Turn PBC off.

- 25 -


Wire Connections

Radio Antenna

Antenna GPS

VIDEO

CAMERA　

VIDEO

OUT

AV Input REAR FRONT SUB

OUT

PIN NO.

Function

Connector A

Rear right (+) / Purple

Rear right (-) / Purple with black stripe

Front right / Gray

Front right (-) / Gray with black stripe

Front left (+) / White

Front left (-) / White with black stripe

Rear left (+) / Green

Rear left (-) / Green with black stripe

Connector B

ACC+ / Red

Antenna-Power Control/ Blue

Illumination / Orange

Battery 12V(+) / Yellow

Ground / Black

- 26 -


1

2

1

2

3

4

5

6

3

4

5

6

7

8

7

8

Steering Wheel Control

22/12/2014 17:16:18

The BLUETOOTH ® world mark and logos are registered trademarks owned by the Bluetooth SIG,

Inc. and any use of such marks by ALDINET S.p.A. is under license.

The MACROM brand is a registered trade mark of MALDINET S.p.A.

Declaration of Conformity

ALDINET S.p.A

Viale C. Colombo, 8 - 20090 Trezzano s/N (MI) - Itlaly

Tel. +39 02 484781 w w w .

m a c r o m .

i t


MACROM M-DVD 5566 car media receiver User manual

Assistant Bot

USER MANUAL

Safety Precautions

Safety Precautions

Expanding System

Contents

Product overview

Front Panel

1. [ ] Button

Press to eject a disc.

2. [MENU] Button

Press to switch between the available audio/video sources applied to the unit.

3. [VOL/ / ] Knob

Rotate to adjust the volume.

Press momentarily to activate the MUTE function. Press again to resume normal

listening.

Press to turn the unit ON. Press and hold to turn the unit OFF.

4. Reset Button

Press to reset system settings to factory default (except password and parental lock

settings).

5. SD Interface Connector

Insert an SD card for playback of music/video files.

6. Map Slot

The Mini SD card is used for the Navigation Map only, not for music or other files.

This may be used for firmware updates if required.

7. A/V Input

Accepts a 3.5mm jack through which signals from various audio/video devices can be

applied to the unit.

8. USB Connector

Connect a USB device for playback of music/video files.

9. Remote Sensor (optional)

10. Disc slot

11. Internal Microphone

Internal microphone for Bluetooth calls.

Remote control overview

Front view

Remote battery

Back view

Basic Operations

Detect parking brake

Mute

VOL/ /

Power On / Off

VOL/ /

VOL/ /

Audible Beep Confirmation

Playing Source Selection

Basic Operations

EQ Menu

Select Preset Equalizer

Adjust EQ Parameters

Adjust FAD BAL

Setting Date /Time

Set Date

Set Clock Mode

Set Time

Radio Mode

Tuner TFT Display

Select Radio as Playing Source

Select One Radio Band

Tune the radio

Radio Mode

Preset Station

Local Seeking

EQ Selection

RDS Basics

Adjust RDS Settings

Radio Mode

RDS ( Radio Data System )

AF Function

EON ( Enhanced Other Networks )

TA Function

CT (Clock Time)

PTY Function

Playback Mode

Load a Disc

Eject a Disc

Touch Screen Controls

Controlling Playback