M6 DSP Loudspeaker User Guide

M6 DSP Loudspeaker User Guide
M6 DSP Loudspeaker
User Guide
EN
M6 User Guide
Important safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
This apparatus has been designed with Class 1 construction and
must be connected to a mains socket outlet with a protective earthing
connection (the third grounding pin).
This apparatus does not include a power switch. The apparatus may be
isolated from mains power either by unplugging the power connector from
the base of the unit, or by unplugging the connector at the opposing end
of the power cord or cable from its supply outlet. As a result, either or
both of these connectors should remain accessible
PLEASE NOTE: Important safety information is located on a label
under the grille cloth at the rear of the loudspeaker.
Safety warnings
• Do not expose the unit to dripping or splashing.
• Do not place any object filled with liquid, such as a vase, on the unit.
• Do not place naked flame sources, such as lighted candles, on
the unit.
• To avoid overheating leave at least 10cm around the equipment to
ensure sufficient ventilation.
• Do not position the unit in direct sunlight, near heat sources such as
a radiator, or directly on top of heat producing equipment, such as a
power amplifier.
• To avoid interference do not position the unit near strong electrical or
magnetic radiation, such as near a power amplifier.
Radio interference
FCC Warning: This equipment generates and can radiate radio
frequency energy and if not installed and used correctly in accordance
with our instructions may cause interference to radio communications
or radio and television reception. It has been type-tested and complies
with the limits set out in Subpart J, Part 15 of FCC rules for a Class
B computing device. These limits are intended to provide reasonable
protection against such interference in home installations.
EEC: This product has been designed and type-tested to comply
with the limits set out in EN55013 and EN55020.
Copyright
Meridian Audio Ltd
Latham Road
Huntingdon
Cambridgeshire
PE29 6YE
England
Copyright © 2012 Meridian Audio Ltd.
Visit us on the Web:
http://www.meridian-audio.com
Part no: M6 (P88406)
This guide was produced by: Human-Computer Interface Ltd,
http://www.interface.co.uk/
EN
N
EN
M6 User Guide
Unpacking
Each pair of loudspeakers is supplied with the following
accessories:
• Power cords.
• This manual.
If any of these items are missing please contact your retailer.
NOTE: You should retain the packaging in case you need to
transport the units.
Connections
Digital connections
The following diagram gives details of the connections in the
base of the loudspeaker:
Use this connection
To connect to this
SpeakerLink input
The SpeakerLink output of a Meridian
Audio Core 200 or Digital Surround
Controller.
SpeakerLink output
The Speakerlink input of a second M6
digital loudspeaker, when connecting in a
daisy-chain.
SpeakerLink Channel
input output selector
Input
Output
L/C
R
Power Fuse
Standby indicator
The status is shown by the indicator at the top of the loudspeaker.
Status
Description
Blue
Loudspeaker in standby
White
Loudspeaker operating
The loudspeakers are switched on or into standby as
appropriate via the SpeakerLink connections by the Meridian
system they are connected to.
Miscellaneous
Switch
Description
Digital Channel Selector
Set to L/C to use the loudspeaker as a
left or centre channel. Set to R to use
the loudspeaker as a right channel.
M6 User Guide
EN
Applications
To connect a pair of M6 loudspeakers to a
Meridian Audio Core 200
The M6 loudspeakers are ideal for a compact Audio Core 200
based home entertainment system.
• Connect analogue and digital sources, such as a TV and
satellite receiver, to the appropriate inputs on the AC200.
• Connect the lower SpeakerLink output on the AC200 to the
Master M6, using a Meridian SpeakerLink lead.
• Connect the upper SpeakerLink output on the AC200 to the
Slave M6, using a Meridian SpeakerLink lead.
• Make sure the Channel selector is set to the L/C position on
the base of the left loudspeaker and to the R position on the
base of the right loudspeaker.
M6 – Slave
TV
M6 – Master
MERIDIAN
SPEAKERLINK
ANALOGUE
OUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
Satellite Receiver
DIGITAL
OUT
Meridian Audio Core 200
ANALOGUE
IN
DIGITAL
IN
SPEAKERLINK
IN
OUT
SpeakerLink lead
EN
N
M6 User Guide
EN
To use a pair of M6 loudspeakers in a
Meridian Digital Theatre
M6s are ideal as the front and rear loudspeakers in a Meridian
Digital Theatre, in conjunction with a Meridian Digital Surround
Controller such as the G68. The following diagram shows how
to connect the loudspeakers using “home run” wiring.
• Connect the L+R SpeakerLink output on the lower row of
the G68 to the Master digital loudspeaker (here the front left
loudspeaker), using a Meridian SpeakerLink lead.
• Make sure the Channel selector on each M6 is set to the
L/C position on the base of the left loudspeaker and to the R
position on the base of the right loudspeaker.
Alternatively you can connect the loudspeakers using “daisy
chain” wiring: connect the front and rear L loudspeakers to
the G68, and then link each pair of loudspeakers together by
connecting the output from the L loudspeaker to the input of
the R loudspeaker.
• Connect the appropriate SpeakerLink outputs on the G68
to each of the remaining loudspeakers, using Meridian
SpeakerLink leads.
Meridian Surround Controller
M6 – Rear R
MERIDIAN
SPEAKERLINK
M6 – Rear L
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
Front R – Slave
Centre – Slave
Front L – Master
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
SpeakerLink lead
M6 User Guide
EN
To create a Sooloos system
The M6s can be used in conjunction with an 818 Reference
Audio Core to make a superb Sooloos system.
You can control music from the 818 Reference Audio Core, or
browse and control music using the Sooloos application on an
iPad, iPhone, or iPod Touch, or the Control:PC/Control:Mac
application on a computer.
• Connect the Network sockets from the Media Core 200 and
the 818 Reference Audio Core to LAN network connections
on your Router, using CAT5 cables.
Router
• Make sure the WAN/Internet port on the Router is connected
to the rest of your network, or to your Cable/DSL Modem.
• Connect the upper SpeakerLink output from the 818
Reference Audio Core to the Master M6 SpeakerLink input,
using a Meridian SpeakerLink lead.
• Connect the lower SpeakerLink output from the 818
Reference Audio Core to the SpeakerLink input of the Slave
M6, using a Meridian SpeakerLink lead.
For information on configuring your Media Core 200 please
refer to the Media Core 200 User Guide.
Media Core 200
Internet
NETWORK
M6 – Slave
Meridian 818 Reference Audio Core
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
SOOLOOS
NETWORK
M6 – Master
SPEAKERLINK
OUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
EN
N
EN
M6 User Guide
M6 User Guide
EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement