null  User manual
GENERAL WARRANTY CONDITIONS
AND PROLONGED WARRANTY
AUTOGARD spol. s r.o. (hereinafter called Manufacturer) provides two year limited warranty for
its products.
The period of warranty shall start from the date of delivery of the product to the first buyer.
Under the condition of signing a Prolonged Warranty Period Contract with Manufacturer or a service
company authorized by Manufacturer, prolonged warranty period will be applicable for the duration
of such contract.
Warranty shall cover any defects that may occur during production, assembly and/or defective parts.
In the case that the product fails within warranty period and cannot be repaired or replaced on site,
the time spent on the repair work is added to the warranty period. Repair time of the product
is maximum 30 (thirty) days. This time starts from the date on which the faulty product or defective part
is delivered to the manufacturer of the product.
Within the warranty period, if the product fails both because of general material and workmanship
faults, it will be repaired without demanding any charge under any title such as workmanship charge,
replaced parts charge, or any charge under any other name. The customer is responsible for paying
shipment charges when sending the product or faulty parts to the Manufacturer. The Manufacturer
will pay freight of the repaired or replaced items back to the customer. If the customer wants to get
the parts via express delivery service, the cost will be customer’s duty.
To benefit from warranty provided by these conditions customers are required to present the original
sales invoice and both serial and service numbers of the product. If the customer fails to present
the original sales invoice or both serial and service numbers, the Manufacturer reserves the right to treat
the product as non-warranty product.
Warranty shall expire immediately under the following conditions:
a) Expiration of general or prolonged warranty period
b) Use of the product contrary to the operating conditions described in user manual
c) Use of the product by plugging into inappropriate voltages or with faulty electric installation
without the prior knowledge and written consent of Manufacturer
d) Alteration or removal of the serial number
e) Failure to pay for the product in a timely fashion
Warranty does not apply to:
a) Loss or damage to the covered product while in the course of transit, delivery, or redelivery
b) Loss or damage to the product due to improper storage
c) Loss or damage to the product due to use of devices or accessories not approved
by the Manufacturer
d) Cosmetic defects or damage, breaks or scratches to the product exterior while in the customer’s
possession or defects that do not inhibit proper operation and performance of the covered
product
e) Repair or replacement due to failure to properly install, operate, maintain, or clean the covered
product
f) Repair or replacement due to vandalism, riot, or general environmental conditions, including but
not limited to rust, corrosion or mold
g) Any service request which results in customer education or no problem found
h) Loss or damage caused by accidental or intentional physical damage, spilled liquids, insect
infestation, misuse, abuse or service costs or damage caused by unauthorized repair personnel
i) Theft and loss
j) Damage caused by disassembly of the product
k) Damage resulting from software virus; improper gas or water connections, or electrical wiring
and connections in user environment; user facilitated minor adjustments and settings outlined
in the product's owner manual; external antenna or local reception problems; inaccessible
products or parts; negligence
l) Failures due to dust, animal or insect damage; acts of God such as fire, water, windstorm, sand,
dirt, hail or earthquake; civil disorders; nuclear accident
m) Consumables
n) Parts and components which are subject to normal wear and tear, such as but not limited to:
i.
Fuses
ii.
V-belts
Prolonged warranty (under Prolonged Warranty Period Contract) does not
apply to:
a)
b)
c)
d)
Items that are not covered by general warranty conditions
Rollers, cutters and printheads of thermal printers
Balancing springs of automatic barriers
Products that are not listed in the Annual Maintenance Contract (integral to Prolonged Warranty
Period Contract)
Final provisions
The Manufacturer reserves the right to interpret any terms and conditions set forth above in its sole
and absolute discretion.
The Manufacturer reserves the right to change these terms and conditions from time to time without
prior notice. Please refer to Manufacturer’s official website for updated warranty and other applicable
terms.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement