LASS Enterprises, Inc. Product Catalog
LASS Enterprises, Inc.
LABOR SAVING DEVICES FOR
THE POOL and SPA INDUSTRY
Your Source For:
Repair Fittings
Plast-Aid
Return Plumbing Extenders
Gutter Drain Extenders
Plumbing Identification Labels
Dura Grip Wrenches
pg1
Floor Inlet Extenders pg17
Floor Inlet Extender Kits pg17
The Button Hook Wrench pg10
The Venturi Extender Overlay pg15
The Main Drain Adapter pg15
The Crossover Sockets pg12
The Klorkinator pg10
s
Product Catalog
2016
e
Checkout thes
o
t
eI
re
u
te
S
The Grid Wand
m
B
The®Flood®Plugs®Ô
Multi-Torkâ Sockets
Visit our web site at: www.lassenterprises.com
201 Grace Blvd., Altamonte Springs, FL 32714
(407) 682-6334
Fax (407) 682-2180
gld2240
pg. 1
4.5” TONGUE AND
GROOVE PLIERS
GRID WAND
TGP-4.5
GWD-1
w
w
w
w
w
ªThoroughly clean DE grids
without disassembling
ªExtends to 68 inches
ªSaves Time
ªDoes a better job
Twenty four perforations at
end of pole send pressurized
spray in 360 degree pattern.
A welcome addition to every pool tech’s tool box
Will become one of the most used tools in the box.
Great for working in those tight places.
Jaws adjust from 0 to ½ inch.
Highest quality - manufactured by CHANNELLOCK Inc.
SVS-1
Empties a sand filter in 15 minutes!
RETURN FITTING
ESCUTCHEONS
RFE-1.5W, RFE-1.5B
w
w
Trims out standard 1 ½”eyeball.
Available in white or black.
Fits most brand filters
Pays for itself in labor savings.
Makes emptying a sand filter both quick and easy
gld2241
pg. 2
BUBBA
BUB-1
The Multiport Valve Repair System
BUBBA saves your customer significant money
while you make even more profit.
BUB-1
Loaded and
ready for action.
—BUBBA makes multiport valve repair trouble free.
— Easily & safely compresses multiport spring for
disassembly and reassembly.
— Pedestal height adjusts to fit all brands of multiport
valves.
— Quickly pays for itself.
— Huge cost savings in repair versus replacement cost.
Great for cleaning:
1) Catch troughs on vanishing edge pools.
2) “Clumps” of leaves around main drain
or in a corner.
3) The spa area of a Pool-Spa combo.
4) Acorns, stones, coins, etc.
5) Quick touch ups.
BUB-1
.
P
.
I
V. SPOT-VAK
VSV-1
This Thing is Amazing!
With its concentrated velocity of suction, the V.I.P. Spot-Vak
captures all debris it comes in contact with. NOTHING GETS
AWAY. Unlike conventional vac heads which disperse leaves,
causing them to float away from the area being vacuumed, the
V.I.P. Spot-Vak will not create clouds when removing algae,
mud, DE powder, or sand. The innovative V-notch design on
the nozzle prevents the V.I.P. Spot-Vak from sticking fast to the
bottom of the pool.
SKIMMER
SERVICING TOOLS
SST-1, SST-2
Enables servicing skimmer baskets
without getting down on your knees.
± Saves your knees, back, and hands.
± Lifts both deck plate and skimmer basket.
± Makes your arm 24 inches longer.
± The SST-2 also seals off a “second” skimmer
while you vacuum the pool using the “first”
skimmer.
± The SST-2 fits both 1 ½” and 2” plumbing.
UNION WRENCH
QuikStick
UNW-1
QST-1
The curved jaws on these unique
adjustable pliers provide a gentle
grip on unions and eyeball rings.
Eliminates the need for a
measuring tape when
determining the correct
length of a pipe segment
when plumbing a system.
± Opens from 1” to 4”.
± Grips without marring the surface of the
item.
± Curved jaws hold pipe and eyeball
rings without damaging them.
SST-2
± Accurately measures and
remembers the length of pipe
that you need.
± Expands from 4 ½” to 31 3/4”.
± Stores in your pocket like a pen.
± Eliminates frustration.
± Saves Time.
SST-1
Eyeball not included.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2242
(407) 682-6334
Fax (407) 682-2180
INSIDE COUPLING
pg. 3
ISC-1.0, ISC-1.5, ISC-2.0
ISC-3.0, ISC-4.0
Great in tight areas where several pipes are routed tight to each other.
Couples schedule 40 PVC pipe inside the pipe.
˜
Available for 1”, 1 ½”, 2”, 3” and 4” for sch. 40 PVC pipe..
˜
The ISC-4.0 and ISC-3.0 double as reducing bushings
˜
˜
(4" to 3" for ISC-4.0, and 3" to 2" for ISC-3.0)
FITTING EXTENDERS
FEX-1.5
FEX-2.0
FEX-2.2
FEX-2.5
Fits in - standard 2” fitting
Fits over - 1 ½”pipe
Fits in - standard 2” fitting
Fits over - 1 ½”pipe
Fits over - 2” Pipe
Fits over -2 ½”Pipe
Fits over - over many 1 ½”fittings
Fits over - many 2” fittings and most
three way valves.
Fits over - many 2” fittings
Fits over -many 2 ½”fittings
˜
˜
˜
Zero flow restriction.
Fits over many standard fittings.
2” version saves most 3 way valves.
NORYL UNIONS
WIRE SAWS for PVC
TPU-1.5, TPU-2.0
High temperature unions that are great for pump input
and output plumbing.
WST-1
WSL-1
Padded Loop Handles
36" Length
Rugged Stainless Steel
Cable
Economy Priced
Glass Filled Polymer T
Handles
36" Length
Rugged Stainless Steel
Cable
Comfortable Grip for
Easier Operation
SSelf
sealing to the pump.
need for Teflon tape or pipe dope.
SUnion parts seal with T-Gasket.
SThreaded end is noryl.
SSlip end is PVC.
SNo
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2243
(407) 682-6334
Fax (407) 682-2180
PVC PIPE EXTENDER
pg. 4
Available in nine popular sizes:
1/2"
3/4"
1"
1 1/4" 1 1/2"
2"
2 1/2"
3”
4”
PEX-.5, PEX-.75, PEX-1.0, PEX-1.2, PEX-1.5, PEX-2.0, PEX-2.5, PEX-3.0, PEX-4.0
Allows repairman to cut and reglue schedule 40 PVC pipe
at any glued plumbing joint.
Saves labor.
Saves material. PVC construction.
Invisible when the repair is complete.
Pump
New MIP
Existing
Plumbing
Pipe
Pipe
Extender Stub
Permanent repair.
Insignificat flow restriction.
A must for every repairman.
EXTEND-ALL™ FITTING
2”
1 ½”
1”
3/4”
EAL-2.0, EAL-1.5, EAL-1.0, EAL-.75
LASS ENTERPRISES, INC. the originator of the pipe extender, has developed a
new repair fitting. The new fitting, called the EXTEND-ALL™ FITTING, is used
when replacing any standard “glued in” fitting, check valve, ball valve, etc. The
old item is cut out by cutting tight to the item and it is discarded. An EXTENDALL™ fitting is glued into each end of the replacement item making it just long
enough to be glued into the existing plumbing.
FRequires ½ the space of a coupling
FNo Measuring - All New Pipe Sections
FAlways Fits Perfectly
FNo Stress on Pipe
FSet Procedure saves time
FNo new pipe needed
FCompatible with all pipe schedules
FResults in neat, professional appearance
Manufactured By:
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2244
pg. 5
DURA GRIP IV
THE ALL-PURPOSE STRAP WRENCH
DG4-1
AEasily and quickly adjusts to any size or shape up to 10”
diameter.
AAutomatically locks strap as torque is applied.
A8 ½”handle permits you to apply plenty of torque to either
loosen or tighten object.
ANon-corrosive construction.
ANon-slip 36” reinforced neoprene strap grips any object
without scratching or causing damage.
Countless uses Pool & Spa - use on: impellers, spa filters, lint trap covers,
chlorinator tops, plumbing unions.
Plumbing & Irrigation - use on: Tub spouts, pipe unions,
shower spouts.
Household - use on: water filters, jar lids.
Automotive - use on: oil filters, fluid caps.
Now Available
Replacement Strap for DG4-1
*
AEasy to use:
A Place strap around object.
A Pull strap tight.
A Turn in direction of arrow.
The Multi-Purpose Equipment
Lid Opening Tool.
A One tool that fits a wide variety of
equipment lids.
A Makes the removal of those stubborn
equipment lids easy!
A Gives that needed leverage in spite of
plumbing obstacles.
A Made of tough molded PVC for long
useful life.
G
rip
a
Dura
A Makes the removal of stubborn lint trap covers easy!
A Gives that needed leverage in spite of plumbing obstacles.
A Vinyl padded non-slip handle grip.
A Super strong welded construction.
A Tough steel materials.
AConvenient hanging strap.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2245
DG3-1
Dura Grip I
DG1-1
Multi Purpose Wrench
pg. 6
A Real Problem Solver
MPW-1
Small Size
Strong Construction
Facilitates removal of several items including:
· Kreepy Krawley Threaded Compression Adapter
· Polaris Universal Wall Fitting
· Pent Air Flush Plug
· Pent Air Vacuum Plug
· Hayward Flush Plug
· Hayward All Purpose Plug
· Water Way Universal Plug
Apply torque with:
· Channel Lock Pliers
· Pipe Wrench
· Screwdriver thru the holes
· LASS’s Clean out plug wrench (COP-2)
Filter Soc
™
Small Lint
Trap Basket
FIS-1
Basket Liners
Large Lint Trap &
Skimmer Basket
Filter Soc traps bugs and unwanted
debris preventing them from entering
the filter system.
• Completely disposable
• Easy to use - Just stretch elastic over
top rim of basket.
• Throw away Soc and replace instead
of cleaning the basket.
FIS-2
.
.
RETURN LINE
CHECK VALVE
RLC-1
AFits any standard 1 ½”plumbing.
ASpring loaded check valve.
LEAK DETECTOR
LED-1
AMakes leak locating easy.
ASimple pressure dye-release control.
AAttaches to standard cleaning pole.
AReaches any place in the pool.
AEasily refilled.
AComplete leak finding instruction included.
AWorks in all types of pools.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2246
Floor Inlet Socket
MT-100S
ª Installs and removesª Hayward Sp1425 floor inlet
ª FIC-1 and similar covers.
ª All steel construction
ª Use with a 3/8” drive ratchet
and a 4” extension.
pg. 7
HYDROSTATIC VALVE
WRENCH
CLEAN-OUT-PLUG
WRENCH
HVW-1
COP-2
1 1/2"
Functions as a "Special Socket"to adapt our
CLEAN-OUT-PLUG WRENCH (COP-2)
to the Hayward Hydrostatic Valve.
Facilitate the installation and
removal of those hard to reach
clean-out plugs.
Fits tabs on the Hydrostatic
Valve snuggly.
30" length easily reaches the
bottom of skimmers and main 30"
drain sumps.
The HVW-1 is stronger than
the tabs.
Sized for both 1 1/2" and 2"
clean-out plugs.
Rugged PVC construction.
Square tubular steel shaft.
Rugged welded construction.
A must for every service truck.
Pays for itself on the first job. 2"
Filter Lid Wrench
FLW-1
Circular PVC wrench that when used with the COP-2, Clean-OutPlug wrench allows the removal and/or replacement of the lid of
Seablue, Richardson, and Baker-Hydro sand filters without damage
to the filter tank.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
gld2247
(407) 682-6334
Fax (407) 682-2180
www.lassenterprises.com
STAIN-BE-GON TM
pg. 8
•Inexpensive - pays for itself the first time you use it.
•Simple to use - No experience needed.
•No need to get wet.
•Quickly attaches to standard cleaning pole.
•No need to “shut the pool down.”
Holds Chlorine Tab
•Spot treats and kills black algae spots one at a
time.
- OR -
•Insert standard 3” chlorine tablet and rub spots
daily until gone.
SBG-1
SERVICEABLE CHECK VALVE
• NORYL Construction
• Easily Disassembled for
Cleaning or Repair.
• 1 ½” and 2” Compatible
• Reversible
• NSF Rating
SCV-1.5
CLEAN
The Handy Grease and Grime Remover
that is no further away than your tool box.
Quickly cleans O-rings- groves.
•Removes most surface stains from concrete pool
including those caused by : bobby pins, nails,
fertilizer spills, calcium deposits & vegetation.
•Insert standard 1 3/4” by 1 3/4” pumice stone and rub
spots gently until they are gone.
FLOAT TO ROPE LOCK
FLL-.75
•Slips over 3/4” braided rope to hold 5x9
floats in the correct location
•PVC and Stainless steel construction for long
life.
•Can be relocated without damage to the rope,
float, or the lock.
•Easy to install - Simply slip 2 locks onto rope
between each float, position the floats, slide a
lock tight to the end of each float and tighten
the screw.
•Easily made tamper proof by filling phillips
head screws with any epoxy
CHLORINATOR WINTERIZING PLUGS
QUIK
Quickly removes dirt and greasy build-up on O-rings.
-
Holds Pumice Stone
Molded vinyl plugs that allow chlorinator saddle tees
to be sealed off.
Can be easily removed when re-opening the pool or
can be left permentantly if the chlorinator is being discarded.
YUK REMOVER
AND
LUBRICATOR
Quickly dissolves grease and grime.
CWP-1
Safely spot cleans any plastic or steel surface.
Causes O-rings to slip into place.
Leaves no heavy build-up.
100% Bio-degradable.
Doubles as a great hand cleaner.
CWP-2
Fits where 3/8" chlorinator
hose is present.
Fits where 5/16" chlorinator
hose is present.
(EZ Clor, Guardex)
(Hayward offline)
Packaged for your tool box in 1oz. bottle.
No - spill spout cap for quick, one handed open and close.
Manufactured By:
LASS ENTERPRISES, Inc.
Caution: Not to be mixed with chlorine bleach
QUC-1
gld2248
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
pg. 9
Repair
Kit
LARGE PIPE CUTTER
for Large Pipe Cutter
LPC-4
LPC-1
Includes: New Blade, Guides,
and Spring
* Cuts PVC and polyethylene pipe up
to 2 " in diameter
* Clean shearing action.
* Hooked jaw holds pipe in cutting position.
* Blade ratchets.
* 12" long handles for leverage.
* Blade is replaceable.
SPA LIGHT ADAPTER
Blade Sharpener
Designed to be Effective, Easy and Safe to Use.
LAD-2
¨Opens to allow light cord to pass
inside.
¨Locks into nitch.
¨Holds light firmly in place.
¨Works with most American
Products and Hayward lights
and nitches.
BSP-1
size Professional Sharpener (7 ¾” x 2 ¾”)
• Full siz
Stage Sharpening
Two
S
•
- make a dull blade sharp
- polish a sharp blade to keep it in tip-top shape
• Produces a Hollow grind edge
• Long lasting ceramic cutting wheels.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2249
(407) 682-6334
Fax (407) 682-2180
®
Multi-Tork Sockets
Multi-Tork® Value Pack
MT-100, MT-101, MT-301,
MT-770, HPS-200
Heater Plug Socket
HPS-200
pg. 10
MT-301
All Multi-Tork® sockets
are used with any 3/8”
drive ratchet or your
portable drill.
This reversible socket fits both the Sta-Rite
and the Raypak Thermal Plugs.
This socket fits both the 7/8”
and the 9/16” hardware used
on the various filter clamps.
Get three sockets at
a cost savings.
This socket fits both sizes of knobs used
on the Sta-Rite® System 3™ filters.
This socket fits the hardware on seven
different filters and pumps.
MT-101
MT-770
MT-100
Button Hook
DPW-150
·Fits all standard filter drain plugs.
·Hard-to-reach plugs made easy.
·Anodized aluminum resists harsh pool chemicals and weather.
·Lightweight, yet strong.
·Lifetime warranty.
Klorkinator
KW-212
Lid/Cover/Valve Wrench
·Strong, Yet Lightweight Construction.
·Four-way fold up handle for EZ travel.
·Two-way Gripping Body.
·Too many uses to count.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2250
(407) 682-6334
Fax (407) 682-2180
pg. 11
POLE PIVOT
PLP-1
gTHEgFLOODgPLUGSg™
Adjustable Pole-End
Angle Connector
8 Pole Pivot has a rugged push button
release mechanism that attaches to
the end of any standard pole
8 Adjust your brush angle to get better
leverage.
8 Pivot and lock any net, Brush or
Vacuum Head into the optimum
operating angle needed.
TFP-1.5, TFP-2.0
Stops the flow of water while repairing
a flooded plumbing system.
Designed to temporarily seal off
schedule 40 PVC
Easily removed after plumbing repair is
complete
Tested to hold with four foot of static
water head.
SIMPLE TO USE:
1) Insert the round side of the plug into the flooding schedule 40 pipe.
2) Slip new fittings and pipe sections over the two foot long tail.
3) Glue the new pieces in place.
NOTE: Avoid getting glue on the tail as much as possible.
4) When the repair is complete, pull on the tail to remove the plug. The
FLOOD PLUG will easily pass through 90s, 45s, tees, male adapters, and pipe
on its way out.
Socket Savers
SKS-4.0, SKS-3.0, SKS-2.0, SKS-1.5,
SKS-1.0, SKS-.75, SKS-.50
Seven Sizes to choose from - 4”, 3”, 2”, 1 ½”, 1”, 3/4”, ½”
Removes schedule 40 PVC pipe leaving the
old fitting socket ready to reuse.
˜ Sturdy steel construction for long life.
˜ Fits any ½”variable speed drill.
˜ Carded for display.
˜
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2251
pg. 12
L-PUMPER
LPU-1
Removes debris from mouth of impellers
without dis-assembling the pump.
·
·
·
·
·
Just remove trap cover and basket
Insert L-Pumper facing the impeller mouth.
Pump handle up & down several times ending with an “up” stroke.
Remove L-Pumper from trap.
Rinse the L-Pumper starting with a “down” stroke to remove debris from the L-Pumper.
Cross-Over Series
MT-501
MT-100H
ª This time saver fits
Pentair® model PS
Commercial Strainer
Lid.
ª Use with and 3/8” drive
ratchet or your
portable drill.
ª This time saver fits
Harmsco® brass
wing nut.
ª Use with and 3/8” drive
ratchet or your
portable drill.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2252
(407) 682-6334
Fax (407) 682-2180
pg. 13
POOL LIGHT ADAPTER
Vac Lock Fitting
LAD-1
VLF-1
¨Opens to allow light cord
to pass inside.
¨Locks into nitch.
¨Holds light firmly in place.
¨Works with most American
Products and Hayward
lights and nitches.
FLOW SKIM SERIES VENTED BASKET
ª Above water handle
prevents contact
with water and
basket contents.
ª Prevents pump
cavitation when
basket is full.
ª Reduces stress on
basket when full.
ª Handle can be
installed on most
existing baskets.
Flow Skim Handle Only
(includes four screws)
FSH-1
Handle with Heavy Duty
Basket for:
Hayward 1080 series
t is
ske
a
Wa
b
ter flows when
full
Handle with Heavy Duty
Basket for:
U3 Skimmer
American
Hayward 1070 series
FSB-2
FSB-1
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2253
(407) 682-6334
Fax (407) 682-2180
pg. 14
Aqua Combs
r
e
t
Fil
ge ers
d
tri ean
r
a l
C C
For
Pool Cartridges
ACP-1
·Enables deep cleaning of cartridges.
·Pic-comb fingers holds pleats open.
·Flat, wide High pressure spray
loosens dirt all the way to the core
and floods the dirt away.
·Shut-off Valve included
·Extends time between filter cleaning.
·Saves Time.
·Available in 1 ½”and 2”
·Needs no lubrication.
·Clip-on ID markers in English and Spanish.
a F
C or
AC artr
S- idg
1
es
TWU-1.5
TWU-2.0
Sp
3-Way Diverter Valve
with Unions
Replacement Bag 280
Replacement Bag 380
RB-280
RB-380
Replacement Bag 180
RB-180
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2254
(407) 682-6334
Fax (407) 682-2180
pg. 15
MAIN DRAIN ADAPTOR
Shower Chain
Replacement Kit
MDR-1
wThis Main Drain Adapter enables the
replacement of any residential main
drain cover.
wNo holes to drill.
wAny cover fits.
wSecurely attaches
cover.
wNo special tools
required.
wInstalls in about one
minute.
wCan be used as
a main drain
pot extender
when
resurfacing a
pool.
SCK-1
ª Contains all the pieces to
repair a commercial
shower control.
ª A great time saver.
ª Easy to install.
VENTURI EXTENDER / OVERLAY
VEO-1, VEO-2
w Extends existing air controls when
installing pavers
wTwo colors
wOff white (VEO-1)
wTan
(VEO-2)
wTwo adapter fittings included to
accommodate different threads
wDimensions are approximate
1 1/8”
CLOSED
OPEN
2"
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2255
(407) 682-6334
Fax (407) 682-2180
pg. 16
Pipe Parana
PAR-1.5, PAR-2.0, PAR-KIT
˜
Removes a pipe fitting from pipe leaving
the pipe end ready to reuse.
h
h
h
h
h
Works on PVC, ABS, CPVC and others.
Flatted shaft for easy attachment to drill motor.
Internal guides to assure true fitting removal.
Sold separately or as a kit which includes both sizes.
Kit includes a sturdy wood storage box.
INSIDE PIPE CUTTER
IPC-1
IPC-4
Reaches inside a PVC pipe and cuts it off squarely and smoothly.
IPC-1 cuts 1 1/4” to 2” pipe, IPC-4 cuts 1 ½” to 6” pipe.
Gets into places where other cutters cannot function.
Optional blade for IPC-1 cuts 1” pipe.
Saves time and money.
Replacement blades are available. (IPC-2, IPC-3, IPC-5, IPC-6).
The Adjustable
GARDEN HOSE WASHERS
JET-SPRAY POWER NOZZLE
JPN-1
AQuickly adjusts from full jet to complete shut off!
AGreat for cleaning decks, pool interiors, etc. !
AGreat for cleaning filter cartridges !
ADurable, yet inexpensive !
AProfessionals recommend it !
AHomeowners love it !
ASell as a sheet or separately.
ASheet of 12 washers.
AHigh Quality Polymer.
ALong Lasting.
GHW-1
LASS ENTERPRISES, Inc.
gld2256
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
pg. 17
Floor Inlet Extender
S Extends Hayward model SP1425 floor
inlet fitting by ½”.
S Pressure connected.
FIE-1,
FIE-3,
FIE-4,
FIC-1,
FIC-2,
FIC-3
S Attaches firmly to present fitting.
S Eliminates the need to cut away surface material
when preparing to resurface a pool.
S Maintains the ability to adjust the flow at each
fitting by adjusting the deflector plate.
S Saves time.
S Results in a better job.
S Stackable if more extension is needed.
S Cost effective.
S PATENT PENDING
FIC-2
FIC-3
FIE-2,
FIE-4
Hayward
SP1425
S Extends Sta Rite model 08417
floor inlet fitting 7/8” to 1 1/4”.
S Threaded connection.
S Extends Sta Rite model 08417
floor inlet fitting by ½”.
S Pressure connected.
FIC-1
S Extends Hayward model SP1425
floor inlet fitting by 3/4”.
S Glued connection.
FIC-1
FIE-1
FIC-1
FIE-2
FIE-3
Sta Rite
08417
Sta Rite
08417
S Each Kit contains:
S
One Floor Inlet Extender
S
One Inlet Cover
S
All the screws needed to install
S Each kit is poly bagged
FIK-4G
FIK-4D
Hayward
SP1425
Floor Inlet Extender Kits
FIK-1,
FIK-1
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2257
FIK-2,
FIK-3,
FIK-2
FIK-4D,
FIK-4G
FIK-3
(407) 682-6334
Fax (407) 682-2180
“Aussi” EYEBALL FITTING EXTRACTOR
pg. 18
AFE-1.5
˜
˜
˜
Gently removes all 1.5” push-in eyeball return fittings.
Does not damage the pipe, the wall surface, or the fitting.
To remove a fittingSimply remove the eyeball.
Slide the “wings” into the fitting until they are behind the back of the fitting.
Now turn the extractor bolt clockwise until the fitting slips out of the pipe.
Return Plumbing Extenders
RPE-1.5S, RPE-1.5F
Female
andard
t
S
”
½
1”.
1
y 3/4” to
Extends
b
s
g
n
i
t
it
dF
Threade
Ideal for pools being resurfaced.
Extends IN-THE-WALL fittings to compensate
for additional surface’s thickness.
˜ White PVC material.
Extend
s
Eyeball 1 ½”Flush Mo
u
Fittings
by 3/4” nt
to 1”.
˜
IMPORTANT: When installing a Return Plumbing Extender
be sure to seal the male threads with Teflon tape or
silicone so as to avoid “behind the surface leaks”.
˜
GUTTER DRAIN
EXTENDER
GUTTER DRAIN GRATE
GDG-1
˜
˜
2” X 4” Gutter Drain Grate
White ABS construction.
GUTTER DRAIN
EXTENSION KIT
GDE-1
Extends Standard 2” x 4” gutter
drain by 1/2”.
˜ Holds itself in position while glue
or silicone drys.
˜ Receives standard 2” x 4”
grates.
˜ White ABS construction.
˜
Includes:
˜
˜
˜
˜
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2258
GDK-1
1 ea. GDE-1
1ea. GDG-1
2 ea. Stainless Steel Screws.
Completely Assembled
pg. 19
PLA-1.5, PLA-6
Molecularly bonds to PVC, ABS, Lexan, CPVC and
other plastics commonly used in pools and spas.
Plumbing
Available in two sizes
6 oz, and 1.5 oz.
»Unsurpassed for PVC plumbing repair! Don’t cut
out damaged PVC, simply & permanently patch it
with Plast-aid* in only 15 minutes!
»Make custom fittings & threaded adaptors.
Pool & Spa
»Repair pools & spas, skimmers, holes, cracks, leaky
PVC etc. in only 15 minutes!
»Plast-aid* repairs are fast, waterproof & permanent.
Plast-aid* can be Colored & Made
into Parts
Plast-aid* is a multi-purpose repair plastic used for
thousands of repair solutions! Unlike anything on the
market today, Plast-aid* forms a hard, durable, waterproof
plastic in only 15 minutes!
Plast-aid* is a two part compound consisting of a liquid and
powder. When combined, Plast-aid*’s unique curing
process begins. As it thickens, Plast-aid* transforms from a
castable liquid, to a glue , to a putty, to a clay, and finally to
a hard, durable, waterproof plastic. This progression makes
Plast-aid* an incredibly unique and versatile tool allowing it
to be cast into molds, used to repair breaks and fill gaps,
formed into shapes for custom parts, and much much more!
»Color Plast-aid* with artist acrylic or wood stain.
»After Plast-aid* cures, drill, cut, file & polish your
custom parts.
THIS STUFF IS AMAZING
YOU’VE GOT TO TRY IT
Talk about a “GREEN” product. Plast-aid*
resurrects items normally declared “scrap”
* Plast-aid is patented and a registered trademark of Plast-aid Corporation
EYEBALL SEAT WRENCH
Eyeball Seat Wrench III
ESW-1
ESW-3
• Machined from a solid block of aluminum.
• Fits most 1 ½” threaded eyeball seats
made in the last 30 years.
Fits most 1 ½" threaded eyeball seats
Including:
Hayward
Pac Fab - Ultimate, & Std.
Purex - Check Valve
American Products
Seablue
Torque Provided by your standard 3/8"
ratchet wrench or channel lock pliers.
Provides balanced torque when used as directed.
Strong PVC construction.
Does not work with “Flush” eyeballs. For flush eyeball capability see our ESW-2
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2259
(407) 682-6334
Fax (407) 682-2180
pg. 20
EYEBALL SEAT WRENCH II
Fits most 1 ½" threaded eyeball seats
Including:
Hayward
Pent-Air - Flush, Ultimate, & Standard
Purex - Check Valve
American Products
Seablue
ESW-2
Provides balanced torque when used as directed.
Aluminum construction.
Permanent One-Piece PVC Line
Repair and Fitting Replacement
Available Sizes & Price
Couplers
Tees
KRC-.50 ½” Coupler
KRT-.50 1/2“ Tee
KRC-.75 ¾” Coupler
KRT-.75 3/4“ Tee
KRC-1.0 1” Coupler
KRT-1.0 1“ Tee
KRC-1.2 1 ¼” Coupler
KRT-1.2 1 1/4“ Tee
KRC-1.5 1 ½” Coupler
KRT-1.5 1 1/2“ Tee
KRC-2.0 2” Coupler
KRT-2.0 2“ Tee
KRC-2.5 2 ½” Coupler
KTT-.75 ¾”x3/4”x1/2”FIP Tee
KRC-3.0 3” Coupler
KTT-1.0 1”x1”x1/2FIP Tee
KRC-4.0 4” Coupler
Line must be visible for sleeve to be
in proper cemented position.
§Revolutionary concept in plumbing repair.
§Six sizes of each of 3 fittings.
§Great for “in the ground” plumbing repairs
KwikRepair is a trademark
of Dawn Industries, Inc.
LASS ENTERPRISES, Inc.
Cement
(Cement on each end, both the fitting taper and the pipe)
To Install:
•
•
•
•
•
•
Use fitting as template.
Cut away damaged section
Dry-fit KwikRepair™ into opening.
Slide one sleeve back to prime & glue end of fitting & end of pi pe.
Slide sleeve forward into position with turning motion.
Repeat until all sleeves are glued into position.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2260
(407) 682-6334
Fax (407) 682-2180
pg. 21
THREAD SHIELD DETECTOR
1 1/2" THREAD SHIELDS
TSD-1
Original THS-1, Magnetic THS-2
Both protect threads of 1 1/2" return fittings during
plastering, guniting, etc.
ŸLocates the “lost” plumbing port when a
Both eliminate need to "clean out" threads at start up.
Both insert easily.
Both have two part construction makeing removal easy.
NO MORE "LOST FITTINGS".
Blue and yellow colors make the locating of plumbing
easy during and after the plastering operation.
Both reduce "water drip" from plumbing.
THS-2 Can be located by our
THREAD SHIELD DETECTOR
EVEN WHEN BURIED 1/2"
UNDER THE POOL SURFACE.
THS-2 thread shield or an “M” version of
a Pipe Shield (PSH-1.0M, or PSH-1.5M)
was used during construction and/or
“plastering” operation.
Also locates embedded steel re-bar in
order to avoid hitting re-bar when
cutting an additional port through wall.
Works equally well when pool is
empty or full of water.
Waterproof.
Weighted to make searching easy.
35" strap
Rugged impact resistant construction.
1” & 1 ½” Pipe Shields
Schedule 40
PSH-1.0, PSH-1.0M,
PSH-1.5, PSH-1.5M
— Protect the inside of 1” and 1 ½”
schedule 40 pipe while guniting, painting,
plastering, etc.
— Prevents partially clogged plumbing lines.
— Two part construction for easy removal.
— Reusable
— The M version can be detected even if
buried under up to ½ inch of concrete or
plaster.
SNAP FITTINGS
The Quick solution to a
“dripping glue joint”.
1. Simply remove pressure from
leaking pipe to fitting joint.
2. Apply glue to inside of SNAP FITTING
and to the leaking area on the
pipe to fitting joint that is leaking.
3. Snap on the SNAP FITTING centering
it over the leak.
4. Allow glue to dry before
pressurizing the joint.
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2261
Available Sizes are:
3/4” A SNP-.75
1” A SNP-1.0
1 ½” A SNP-1.5
2” A SNP-2.0
2.5” A SNP-2.5
(407) 682-6334
Fax (407) 682-2180
POLARIS WALL WRENCH
PWW-1
AC VOLTAGE SENSOR
pg. 22
- AVS-2 Battery Powered - Long lasting battery life from easily
replaced, commonly available AAA batteries.
Indicates presence of AC voltage (50V to 1000V)
without any electrical connection.
Activates automatically when AC is present.
Quick Access - Strong pocket clip keeps
AVS-2 as handy as your shirt pocket
Finally a wrench for the
Polaris wall fitting that really
or throw into tool box.
Safe to use - All plastic construction.
Easy to use - No leads to hook up.
Self tests before every use, via
static electricity flash.
Batteries included.
S Reaches around the locking “stubs”.
S Locks into the notches in the back.
S One piece aluminum construction.
S Nuralized handle for easy grip.
The AVS-2 is simple to operate.
Just hold the sensor tip on the spot to
be tested. The indicator lights and stays
lit if AC voltage is present. No light and
no sound means no AC voltage.
HOSE AND CORD REEL
HCR-1
Stores backwash hose and electric cords quickly, neatly,
and safely.
Reels and unreels full length in seconds.
Rugged plastic construction.
Stores up to 85 feet of either 1 1/2" or 2" backwash hose.
Stores up to 100 feet of extension cord either single or
double wrapped.
Great for your service truck or for in-store operations, and
even on construction sites.
Backwash Hose Storage
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2262
Electric Cord Storage
(407) 682-6334
Fax (407) 682-2180
pg. 23
Plumbing & Equipment
IDENTIFICATION LABELS
IDL-1B, IDL-2B, IDL-3B, IDL-4B
Sun resistant permanent black ink.
Laminate coated vinyl for long life.
ª Permanent adhesive.
ª 3/8” high letters.
ª A single sheet “Id’s” several pools.
ª Dual Purpose
- Construction crews - prevents
confusion during construction.
- Consumer - Helps new pool owner
understand the system.
ª Words are precut for easy application.
ª Four versions to choose from.
ª
ª
I Below is a full size sample. I
IDL-1
IDL-2
IDL-3
IDL-4
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2263
(407) 682-6334
Fax (407) 682-2180
VENTED SKIMMER BASKET
pg. 24
VBS-1, VSB-2, VSB-3
The patented* Vented Skimmer Basket solves three potentially serious problems for the swimming pool
owner - - by providing an above water handle that also serves to prevent skimmer blockage caused by
a full basket of debris.
EAbove water handle prevents contact
with items in the basket (frogs, snakes,
slimy leaves, bugs, etc.).
EVent prevents pump cavitation due to an
overfull basket.
EVent prevents broken baskets due to an
overfull basket.
VSB-1 ~ Fits several skimmer brands including
Swim Quip, American Products (flap weir
style), Pac Fab, Jacuzzi Deckmate,
Hayward 1070 and others.
VSB-2 ~ Fits Hayward 1080
VSB-3 ~ Fits Baker Hudro.
* The Vented Skimmer Basket is manufactured and patented by GVT, Inc. Patent No. 583050
SKIMMER BASKET HANDLE
»Stays on the basket so its always there
when you need it.
»Installs in minutes to any skimmer basket
using 2 included screws.
»Handle sits above the waterline and below
the skimmer lid.
»Weighted plastic sinks the basket.
ded
.
Economical way to combat frogs,
snakes, bugs and worse - they all
find a way into the skimmer
basket. The Skimmer Basket
Handle allows you to remove a
basket without ever getting your
hands wet, avoiding the critters,
even the ones you can’t see.
Case of 8
shown.
Bas
ket
n ot
inclu
SBH-1
SBH-2
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2264
(407) 682-6334
Fax (407) 682-2180
pg. 25
POWER VAC PV002-D
Specifications for PV002-D
Width
19”
Length
11”
Height
11”
Throat Size
6”
G.P.H.
14,000
Propeller
2-Blade
Motor
30 Pound Thrust
Cord length
40 Feet
Amp Draw
11 under load
Run Time
3 hours
Description
Power Vac
Safety Lid
Fine Mesh Bag for PV002-D
Micron Bag
Heavy Duty Bag for PV002-D
Giant Heavy Duty Bag 15”x42”
Standard Screen Bag 15”x24”
Giant Screen Bag 15”x43”
Battery for PV002-D
Additional Battery Case
Battery Charger
Easily vacuum a 15’ x 30’ swimming pool in 8-10 minutes with
the Power Vac PV002-D. It is a light weight, portable, selfcontained vacuum for one-person operation and ideal for
residential and commercial pools. Features 14,000 G.P.H. flow
rate, 20” cleaning path, and was specially engineered for
precision cleaning and easy maneuvering in tight areas.
Removable filter bags with unique bungee cord retainer makes
emptying simple and effortless. Constructed of non corrosive
A.B.S., machine will not rust, dent or corrode. Includes 40 foot
floating cord, filter bag and battery carrying case.
Part #
PV002-D
PV018-D
PV019-D
PV020-D
PV022-D
PV022-G
PV023-D
PV023-G
BAT-1
PV012-D
BAC-1
Options:
(1) Superfine mesh bag (PV019-D) filters to
about 30 micron particle size.
(2) Heavy Duty Bag (PV022-D).
(3) Giant Heavy Duty Bag (PV022-G).
(4) Standard Screen Bag (PV023-D).
(5) Giant Screen Bag (PV023-G).
(6) Micron Bag (PV020-D).
(7) 12 Volt, 35 Amp Hour Battery (BAT-1).
(8) 12V Trickle/Float Charger (BAC-1).
Manufactured By:
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2265
(407) 682-6334
Fax (407) 682-2180
pg. 26
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
(407) 682-6334
Fax (407) 682-2180
NO DEAD STOCK GUARANTEE
LASS Enterprises, Inc. believes that none of our
distributors should be “stuck” with any of our
products that do not sell in their area.
Therefore, all of our products are sold with a
“Trade Back” Guarantee. This means that if you
cannot sell a product that you purchased from
us within six months that you are allowed to
return the unsold product (Freight prepaid) and
receive a 100% credit toward any of our other
products.
With a guarantee like this you can increase
sales by trying our products with no risk to your
overall profits.
We stand ready to serve you and your
customers.
Alan D. Vander Boegh, Pres.
LASS Enterprises, Inc.
gld2266
LASS Enterprises, Inc.
LA
PO B
O
O R
L S
an A
d VIN
SP G
A D
IN E
D VI
U C
ST E S
RY F
O
R
TH
E
Product Catalog
LASS ENTERPRISES, Inc.
201 Grace Blvd. - Altamonte Springs, FL 32714
www.lassenterprises.com
gld2267
(407) 682-6334
Fax (407) 682-2180
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement