CS1W-CN114 Datasheet
Table of Contents
Name
Page Number
PLC Connections
Cable Solutions for Omron PLCs
Cable Solutions for Multi-Vendor PLCs
i
1
11
15
Reference Information
PLC Connections
The following pages illustrate the cabling options for
connecting Omron programmable controllers with
computers, Omron's HMIs, hand-held programmers,
high-density I/O modules and I/O terminal blocks.
Hand-held Programmers and CPM1A, CPM2A, SRM1 Peripheral Port
CPM1A
CPM2A
SRM1
C200H-CN222 (2 m)
C200H-CN422 (4 m)
CQM1-PRO01-E
C200H-PRO27-E
1
Reference Information
Hand-held Programmers and CQM1H Peripheral Port
CQM1H
CS1W-CN224 (2 m)
CS1W-CN624 (6 m)
CQM1H-PRO01-E
C200H-PRO27-E
CS1W-CN114 (5 cm)
CQM1-PRO01-E
2
CS1W-CN114 (5 cm)
C200H-CN222 (2 m)
C200H-CN422 (4 m)
C200H-PRO27-E
Reference Information
Hand-held Programmer and CPM2C Communication Port
CPM2C
CS1W-CN114 (5 cm)
CQM1H-PRO01-E
CS1W-CN224 (2 m)
CS1W-CN624 (6 m)
CS1W-KS001-E
Key Sheet
(supplied with
CQM1-PRO01-E)
CQM1-PRO01-E
CS1W-KS001-E
Key Sheet
(supplied with
C200H-PRO27-E)
C200H-PRO27-E
3
Reference Information
CQM1H and PC
CQM1H
To peripheral port on the CPU:
CS1W-CN226 (2 m), CS1W-CN626 (6 m)
CS1W-CN118 (10 cm)
C200HS-CN220-EU (2 m)
CS1W-CN114 (5 cm)
CQM1-CIF02
PC
To serial port on the CPU or Inner Board:
C200HS-CN220-EU Program Download Cable
C200H-CN320-EU Communication Cable
CPM2C and PC
CS1W-CN226 (2 m), CS1W-CN626 (6 m)
CPM2C
CS1W-CN118 (10 cm)
C200HS-CN220-EU (2 m)
CS1W-CN114 (5 cm)
CQM1-CIF02
CPM2C-CN111
(15 cm)
HMI
4
CQM1-PRO01-E, etc.
PC
Reference Information
CPM2C + Serial Communication Adapter and PC
CPM2C- CPM2C
CIF01 CPU Unit
CPM2C-CIF11
for Multi-drop
RS-422/RS-485
CPM2C- CPM2C
CIF11 CPU Unit
PC
C200HS-CN220-EU
CS1W-CN226 (2 m), CS1W-CN626 (6 m)
NT2S Message Display and Programmable Controllers
Peripheral port (Old type: C200H, SRM1, CPM2A, CPM1A, CPM2B*)
*Note: CPM2B must use CS1W-CN114 adapter.
NT2S-SF121
NT2S-CN212 (2 m)
NT2S-CN215 (5 m)
NT2S-SF122/123
NT2S-CN222-V1 (2 m)
NT2S-CN225-V1 (5 m)
NT2S-SF121
Peripheral port (New type: CS1, CQM1H, CPM2C)
NT2S-CN223 (2 m)
NT2S-SF122/123
NT2S-CN224 (2 m)
5
Reference Information
CPM2C CPU and Expansion I/O + XW2B/XW2C 20-pin Screw Terminal Blocks
CPM2C Connector type
CPM2C-C(1)DTC-D CPU Units with 16 pt DC IN/16 pt NPN OUT
CPM2C-E(D)TC Expansion I/O Modules with 16 pt DC IN/16 pt NPN OUT
OUTPUT
2 cables are required for each module
XW2Z-50A (0.5 m)
XW2Z-100A (1 m)
XW2Z-150A (1.5 m)
XW2Z-200A (2 m)
XW2Z-300A (3 m)
XW2Z-500A (5 m)
XW2B-20G4
INPUT
XW2C-20G5-IN16
Dedicated input screw terminal block
6
XW2B-20G5
XW2B-20G4
Reference Information
CPM2C CPU and Expansion I/O + G70A, G70D Relay I/O Blocks
CPM2C Connector type
CPM2C-C(1)DTC-D CPU Units with 16 pt DC IN/16 pt NPN OUT
CPM2C-E(D)TC Expansion I/O Modules with 16 pt DC IN/16 pt NPN OUT
G70D-VSOC16
OUTPUT
2 cables are required for each module
G79-100C (1 m)
G79-150C (1.5 m)
G79-200C (2 m)
G79-300C (3 m)
G79-500C (5 m)
G70A-ZOC16-3 +
G2R-1-S(N) relays
INPUT
G70A-ZOC16-3 +
G2R-1-S(N) relays
G70D-SOC16
CQM1H 16-point PNP Output Module + G70A Relay I/O Block
CQM1-OD214
(16 PNP outputs)
G79-Y100C
G79-Y150C
G79-Y200C
G79-Y300C
G79-Y500C
(1 m)
(1.5 m)
(2 m)
(3 m)
(5 m)
G70A-ZOC16-4 +
G2R-1-S(N) relays
7
Reference Information
CQM1H High-Density I/O Modules + XW2B Screw Terminal Blocks
CQM1H 32-Point I/O Modules
XW2Z-50B (0.5 m)
XW2Z-100B (1 m)
XW2Z-150B (1.5 m)
XW2Z-200B (2 m)
XW2Z-300B (3 m)
XW2Z-500B (5 m)
CQM1-ID213 (32 NPN inputs)
CQM1-ID214 (32 NPN inputs)
CQM1-OD213 (32 NPN outputs)
CQM1-OD216 (32 PNP outputs)
XW2B-40G5
XW2B-40G4
8
Reference Information
CQM1H High-Density Input Modules + XW2C Input Screw Terminal Blocks
CQM1H 32-Point Input Modules
1 - 1.5 - 2 - 3 - 5 m
0.75 - 1.25 - 1.75 - 2.75 - 4.75 m
CQM1-ID213 (32 NPN inputs)
CQM1-ID214 (32 NPN inputs)
XW2Z-100D
XW2Z-150D
XW2Z-200D
XW2Z-300D
XW2Z-500D
(1 m + 0.75 m)
(1.5 m + 1.25 m)
(2 m + 1.75 m)
(3 m + 2.75 m)
(5 m + 4.75 m)
XW2C-20G5-IN16
XW2C-20G5-IN16
9
Reference Information
CQM1H High-Density Output Modules + Output Relay Blocks
CQM1
1 - 1.5 - 2 - 3 - 5 m
.75 - 1.25 - 1.75 - 2.75 - 4.75 m
CQM1-OD213
(32 NPN outputs)
G79-O100C-75 (1 m + 0.75 m)
G79-O150C-125 (1.5 m+ 1.25 m)
G79-O200C-175 (2 m+ 1.75 m)
G79-O300C-275 (3 m+ 2.75 m)
G79-O500C-475 (5 m+ 4.75 m)
G70D-VSOC16
G7TC-OC16 Relay Block or
P7TF-OS16 Block Base with
G7T-1112S Relays or
G3TA-ODX02S SSRs
10
G70A-ZOC16-3 +
G2R-1-S(N) relays
G70D-SOC16
Cable Solutions for Omron PLCs
Operator Interface Terminals and CPM1A/CPM2A
Peripheral Port
CPM1A
Serial Port
Peripheral
Port
C200H-CN__0-EU
NT31C-CN__0-EU (for NT31C Port B only)
NT11S
NT20S / 600S
NT21 / 31 / 631
CPM1-CIF01
CPM2A
Serial Port
Operator Interface Terminals and CPM2C PLC
Serial
C200H-CN__0-EU
NT31C-CN__0-EU (for NT31C Port B only)
Port
CPM2CCIF01
CS1W-CN118
CPM2C-CN111
Peripheral
Port
XW2Z-200T-2
XW2Z-500T-2
(Recommended Cable)
NT11S
NT20S / 600S
NT21 / 31 / 631
CPM2C
11
Cable Solutions for Omron PLCs
Operator Interface Terminals and CPM2B PLC
CS1W-CN118
C200H-CN__0-EU
NT31C-CN__0-EU (for NT31C Port B only)
Peripheral Port
Serial Port
XW2Z-200T-2
XW2Z-500T-2
(Recommended Cable)
CPM2B
NT11S
NT20S / 600S
NT21 / 31 / 631
Operator Interface Terminals and CQM1H PLC
CS1W-CN118
C200H-CN__0-EU
NT31C-CN__0-EU (for NT31C Port B only)
Peripheral
Port
Serial
Port
Expansion
Serial Port
XW2Z-200T-2
XW2Z-500T-2
CQM1H
12
NT11S
NT20S / 600S
NT21 / 31 / 631
Cable Solutions for Omron PLCs
Operator Interface Terminals and CJ1 PLC
CS1W-CN118
Peripheral
Port
RS232C
Serial Modules
C200H-CN__0-EU
NT31C-CN__0-EU (for NT31C Port B only)
Serial Port
XW2Z-200T-2
XW2Z-500T-2
CJ1
NT11S
NT20S / 600S
NT21 / 31 / 631
Operator Interface Terminals and CS1 PLC
CS1W-CN118
RS232C
Serial
Modules
RS232C
Serial
Inner
Board
C200H-CN__0-EU
NT31C-CN__0-EU (for NT31C Port B only)
CS1
Serial Port
XW2Z-200T-2
XW2Z-500T-2
NT11S
NT20S / 600S
NT21 / 31 / 631
13
Cable Solutions for Omron PLCs
NT2S Message Display and Programmable Controllers
Peripheral port (Old type: C200H, SRM1, CPM2A, CPM1A)
NT2S-SF121
NT2S-CN212 (2 m)
NT2S-CN215 (5 m)
NT2S-SF122/123
NT2S-CN222-V1 (2 m)
NT2S-CN225-V1 (5 m)
NT2S-SF121
Peripheral port (New type: CJ1, CS1, CQM1H, CPM2C)
NT2S-CN223-V1 (2 m)
NT2S-SF122/123
NT2S-CN224-V1 (2 m)
NT2S Custom Cables
Any Omron
PLC Serial Port
RS232C
NT2S-SF121
Male DB9
Metric
Threads
2.6 mm
TXD
RXD
GROUND
Any Omron
PLC Serial Port
RS232C
Male DB9
Metric
Threads
2.6 mm
TXD
RXD
GROUND
5 VDC
14
Male DB9
Create custom cable
2
3
1
9
4
5
2
3
9
6
1
4
5
SHIELD
2
3
5
9
TXD
English
Threads
4-40 screw
RXD
GROUND
(Purchase Omron’s C200H-CN32O-EU and
short pins 5 and 9 on NT side as shown)
Female DB9
SHIELD
2
3
4
5
7
GROUND
TXD
NT2S-SF122
English
Threads
4-40 screw
VOLT IN (5 VDC)
GROUND
RXD (232)
Custom Cable Ordering Information
Description
Metric thread shell and screws - 2.6 mm
English thread shell and screws - 4-40 screw
Male connector
Female connector
Part Number
XM2S-0911
XM2S-0913
XM2A-0901
XM2D-0901
Cable Solutions for Multi-Vendor PLCs
Allen Bradley MicroLogix 1200
An alternative cable configuration uses a custom RS-232 9-to-9 PIN cable connecting to the Allen-Bradley
1767-CBL-PM02(Series C). The diagram below shows the pinouts for the custom RS-232 cable:
Connects to Omron NT
Connects to AB 1761 Cable
DCD
RXD
TXD
DTR
GROUND
DSR
RTS
CTS
RI
9 Pin Male
DB9 Connector
-1
TXD -2
RXD -3
-4
-5
-6
-7
-8
GROUND -9
9 Pin Male
DB9 Connector
123456789-
AB 1761-CBL-PM02
(Series C)
AB MicroLogix 1200 Communication Cables
1761-CBL-PM02(Series C)
DB9 to 8 pin mini-din connector (order from AB)
Allen Bradley SLC 5/02
Communicates via AB’s DF1 protocol. This PLC comes with only a DH-485 port. The Allen-Bradley 1747-KE module
must be purchased to provide a serial connection on the SLC 5/02. Connect the communication cable from the NT
to the serial port on the 1747-KE module.
AB SLC 5/02
1747-KE
RS232
DH-485
NT631C-CN321-EU
DH-485
NT31 (Port A)
NT631 (Port A or B)
1747-C13
Allen Bradley SLC 5/00, 5/01, 5/02
This cable can only be used in 1:1 connection
with DH485 port.
NT31C-CN321-EU
AB SLC 5/00, 5/01, 5/02
NT31 (Port B)
DH-485
NT631C-CN221-485
NT31 (Port A)
NT631 (Port A or B)
NT631C-CN221-485
AB SLC 5/02 Communication Cables and Accessories
NT31C-CN321-EU
NT31 (Port A)
3.0 m cable, 25 to 9 pin, NT to AB SLC PLC
NT631C-CN321-EU
3.0 m cable, 9 to 9 pin, NT to AB SLC PLC
1747-KE
DB9 Serial Port Module (order from AB)
1747-C13
DH-485 module connection cable
V060-E1-2
Operation Manual – Multi-vendor Connection
15
Cable Solutions for Multi-Vendor PLCs
Allen Bradley SLC 5/03, 5/04, 5/05
Communicates via AB’s DF1 protocol. Connect the communication cable from the NT to a serial port on the PLC using Omron cable part numbers.
AB SLC 5/03, 5/04, 5/05
DF1
RS232
NT631C-CN321-EU
NT31 (Port A)
NT631 (Port A or B)
Allen Bradley SLC 5/03, 5/04, 5/05
NT31C-CN321-EU
This cable can only be used in 1:1 connection
with DH485 port.
NT31 (Port B)
AB SLC 5/03, 5/04, 5/05
DH-485
NT631C-CN211-485
NT31 (Port A)
NT631 (Port A or B)
NT631C-CN211-485
NT31 (Port A)
AB SLC 5/02 Communication Cables and Accessories
NT31C-CN321-EU
3.0 m cable, 25 to 9 pin, NT to AB SLC PLC
NT631C-CN321-EU
3.0 m cable, 9 to 9 pin, NT to AB SLC PLC
V060-E1-2
Operation Manual – Multi-vendor Connection
GE 90-20 and 90-30 Series PLCs
Communicates via GE’s SNP-X protocol. The Omron NT is communicating RS-232, while the GE PLC uses RS-422. An RS232 to
RS422 converter (HE693SNP232A) is needed to complete communications.
GE 90-20 and 90-30 Series
SNP
NT631C-CN322-EU
NT31 (Port A)
NT631 (Port A or B)
HE693SNP232A
NT31C-CN322-EU
GE 90-20 and 90-30 Series Communication Cables and Accessories
16
NT31C-CN322-EU
3.0 m cable, 25 to 9 pin, NT to GE PLC
NT631C-CN322-EU
3.0 m cable, 9 to 9 pin, NT to GE PLC
HE693SNP232A
RS232 to RS422 adapter (order from GE)
V060-E1-2
Operation Manual – Multi-vendor Connection
NT31 (Port B)
Cable Solutions for Multi-Vendor PLCs
Siemens S7-300 and S7-400 Series PLCs
Communicates with Siemens HMI Adapter protocol. The Omron NT is communicating RS-232 to the Siemens HMI adapter,
6E57-972-OCA10-OXAO. The adapter is necessary to convert the HMI Adapter protocol into the Siemens proprietary MPI protocol.
Siemens S7-300 and S7-400 Series
MPI
NT631C-CN323-EU
NT31 (Port A)
NT631 (Port A or B)
6E57-972-0CA10-OXAO
NT31C-CN323-EU
Siemens S7-300 and S7-400 Communication Cables and Accessories
NT31C-CN323-EU
3.0 m cable, 25 to 9 pin, NT to Siemens PLC
NT631C-CN323-EU
3.0 m cable, 9 to 9 pin, NT to Siemens PLC
6E57-972-OCA10-OXAO
HMI Adapter for MPI protocol (order from Siemens)
V060-E1-2
Operation Manual – Multi-vendor Connection
NT31 (Port B)
Mitsubishi A-Series PLCs
Communicates using Mitsubishi’s Computer Link protocol. The Omron NT and the Mitsubishi A-Series PLC are communicating using
RS-232 communications. Communications can be RS-422 by using custom cables as specified in Operation Manual V042-E1-1.
Mitsubishi A-Series
NT631C-CN324-EU
NT31 (Port A)
NT631 (Port A or B)
Computer Link Module
NT31C-CN324-EU
Mitsubishi A-Series Communication Cables and Accessories
NT31C-CN324-EU
3.0 m cable, 25 to 9 pin, NT to Mits-A PLC
NT631C-CN324-EU
3.0 m cable, 9 to 9 pin, NT to Mits-A PLC
V042-E1-1
Operation Manual – PC (Mitsubishi) Connection
NT31 (Port B)
17
Cable Solutions for Multi-Vendor PLCs
Mitsubishi FX-Series PLCs
Communicates via Mitsubishi’s Computer Link protocol. The Omron NT and Mitsubishi FX-Series PLC are communicating using RS422
communications. The NT31 cable connects from the 25-pin port B, while the NT631 connects from the RS422 terminal screws for Port B.
Mitsubishi FX-Series
NT631C-CN325-EU
NT631 (Port B Terminal Strip)
25 Pin Connector RS422
NT31C-CN325-EU
NT31 (Port B)
Mitsubishi A-Series Communication Cables and Accessories
NT31C-CN325-EU
3.0 m cable, 25 to 25 pin, NT to Mits-FX PLC
NT631C-CN325-EU
3.0 m cable, 4 Wires to 25 pin, NT to Mits-FX PLC
FX-20P-CADP
Cable for FX0 & FX0N PLC (buy from Mitsubishi)
V042-E1-1
Operation Manual – PC (Mitsubishi) Connection
Modicon TSX Micro 37-21/22 & Premium Series PLCs
For RS-232C connection:
PLC Side
(TSX SCP CD 1030)
Omron
NT Side
3
2
5
4
7
2 SD
3 RD
RXD
TXD
CTS
RTS
SG
TSX SCP111
9 Pin Male
Metric Thread
PLC Side
(TSX SCP CD 1030)
Omron
NT Side
3
2
5
4
7
2 SD
3 RD
RXD
TXD
CTS
RTS
SG
25 Pin Female
Modicon TSX Series Communication Cables and Accessories
18
9 SG
25 Pin Female
TSX SCP CD 1030
TSX SCP111
Multi-protocol PCMCIA card for RS-232C
TSX SCP114
Multi-protocol PCMCIA card for RS-422A
TSX SCP CD 1030
Connecting cable for PCMCIA for RS-232C
TSX SCP CM 4030
Connecting cable for PCMCIA for RS-422A
NT31 (Port A)
NT631 (Port A or B)
7 SG
25 Pin Male
Metric Thread
NT31 (Port B)
Cable Solutions for Multi-Vendor PLCs
Modicon TSX Micro 37-21/22 & Premium Series PLCs
For RS-422A connection:
PLC Side
(TSX SCP CX 4030)
Orange/White
White/Orange
White/Green
Green/White
Omron
NT Side
NT631 (Port B Terminal Strip)
SDB(+)
SDA(-)
RDB(+)
RDA(-)
Brown/White
Terminal
TSX SCP114
TSX SCP CM 4030
PLC Side
(TSX SCP CX 4030)
Omron
NT Side
Orange/White
11 SDB(+)
White/Orange
15 SDA(-)
White/Green
10 RDB(+)
Green/White
16 RDA(-)
NT31 (Port B)
Brown/White
25 Pin Male
Metric Thread
Modicon TSX Quantum Series PLCs
For RS-232C connection:
PLC Side
Shield
RXD
TXD
DTR
GND
DSR
RTS
CTS
1
2
3
4
5
6
7
8
9
PLC Side
Shield
RXD
TXD
DTR
GND
DSR
RTS
CTS
1
2
3
4
5
6
7
8
9
Omron
NT Side
1
2 TXD
3 RXD
4
5
6
7
8
9 GND
9 Pin Male
Metric Thread
Omron
NT Side
1
2 TXD
3 RXD
4
5
6
7 GND
25 Pin Male
NT31 (Port A)
NT631 (Port A or B)
NT31 (Port B)
19
OMRON ELECTRONICS LLC
1 Commerce Drive
Schaumburg, IL 60173 USA
800.55.OMRON (66766)
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416.286.6465
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci
©2002 OMRON ELECTRONICS LLC
Printed in the U.S.A.
Specifications subject to change without notice.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
CS1W-CN114
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement