USB2.0 NAS Dongle User's Manual

USB2.0 NAS Dongle User's Manual
USB2.0 NAS Dongle User’s Manual
1.0 Product overview
Thank you for purchasing USB2.0 NAS Dongle storage device. Now you can easily add
USB2.0 Storage into your network. Before using this device, please read the Key Features
Key Features
- Support USB mass storage device
- Support Auto IP (DHCP server or DHCP Client)/ Fixed IP
- Under network environment, it supports one 10/100Mbps Ethernet port
- Password management provides secure access to HDD and web management
- Support Samba/FTP server
- Support Bit Torrent download server
- Support XBOX360 media & Apple i-Tunes music server
- Support USB Printer server
- Compatible with Windows 2000/XP/VISTA, Mac 10.5.4 above
NAS Dongle is a flexible, economical and powerful unit for your network. Follow the
instructions to help you connect, set it up, and configure it.
Network environment
There are 3 different setup conditions you can choose:
- Setup NAS Dongle as DHCP Client:
If your NAS Dongle operates under a built-in DHCP server router (ex. Internet Sharing Hub),
it will obtain an IP from DHCP Server automatically.
- Setup NAS Dongle as DHCP Server:
If your operating environment does not support DHCP server, NAS Dongle will immediately
act as DHCP server and assign an IP for installation.
- In Static IP environment:
You need first configure the IP for NAS Dongle to operate in the static IP environment. For
configuring details, please refer to “IP Config” setup page.
2.0 NAS Dongle Hardware installation
If you connect NAS Dongle to your computer directly, make sure to obtain the IP address
and DNS settings automatically, otherwise you may not be able to find the device.
- Connect USB mass storage into USB port
- Connect LAN cable via LAN switch or Router.
- Connect 5V power adapter to power up.
3.0 Search NAS Dongle by Utility
1. Browse the CD enclosed in the product package, copy and paste “SDisk Utility” into
your computer. Double click the icon to start search.
Note: “SDisk utility” was written in JAVA, please make sure you have installed the JAVA
runtime environment on your computer before. If not, please install it from the CD.
2. When NAS Dongle is found, click “Connect” to enter configurations.
3.1 Search NAS Dongle by using Internet explorer.
1. Open IE and type default host name “storage” in the search bar.
2. Default login is “admin” for both user name and password, click “OK” to enter
3.2 Hard Disk format
For the first time installation, you need to format hard disk into FAT32 system file, this
procedure applies to either new or used hard disk.
4.0 Status
Provide the basic information for Turbo NAS.
4.1 Identification
You can change and modify your host & group name, and password from this page. Click
“Apply” to save the setting.
- Host name: This is used to identify your device on the network. If you prefer a different
name, type in the new name and click “Apply” to save setting.
- Group Name: This should be same as your workgroup. In general, the default
“WORKGROUP” will be OK. But if your workstation belongs to different workgroup, type in
the correct group name to modify.
In Window O/S, right click on “My computer”, choose “Properties”, and go to the
computer name tab to see your current workgroup.
For Mac O/S to join windows workgroup, open the directory access utility (under
Applications-> utilities), select SMB and click configure to modify the settings (administrator
access required to access this option.)
Note: we strongly suggest you to change the password as soon as you logged in, to prevent
unauthorized access.
4.2 Date/ Time setting
You can change time setting from this page. Clicks “Apply” to save the setting. By default
SNTP is in network time service, your can also select “Synchronize to PC”. If internet access
is available we recommended setting SNTP to Network time service instead.
4.3 IP Configuration
By default, the “IP config” is set to “Automatic IP”. This is the recommended setting and
will allow Turbo NAS to obtain its IP address automatically. If you prefer setting it manually,
select the static IP option, enter your own value and click apply to confirm the new setting.
Setting it manually is useful when it often obtain a different IP address but you have a static
IP address in order to mount the network drive or setup port forwarding as an example.
4.4 Disk Utility
In this page, you can manage the hard disk setting.
- Format: For the first time installation, you need to format hard disk into FAT32 system
file, this procedure applies to either new or used hard disk.
- Sleep Time: This is to select time frame to setup hard disk sleeping mode.
- Scan Disk: After the scan, it will show the number of file content and health status for
the hard disk.
4.5 Maintenance
This page allows you to update Turbo NAS firmware, to go back to default setting or to
reboot NAS system.
- Firmware update: Follow the steps below to update the loader and firmware for Turbo
Obtain the latest firmware from your vendor.
Store the firmware file in your computer and decompress it if necessary.
Browse your system and locate the firmware (BIN file).
Click on “upload”.
Confirm the pop-up massage to start the update.
Wait and DO NOT click anywhere else or turn off the power! This might take a few
7. Once the update is done, it will prompt you to reboot the device.
8. Click on ”reboot” to restart the device.
9. Wait for about one minute and then go to the status page to confirm the update is
- Factory defaults: Forgot your admin password?? Click on the factory fefaults and go
back to the default password setting. Besides SAMBA/FTP account setting will still remain in
the Turbo NAS, rest of setting will go back to factory default.
- System reboot: This can be used to restart the network drive after a firmware update.
5.0 SAMBA Server (SMB)
SMB server allows you to share data or files through LAN environment. A default “guest”
folder is created and shared to all users from Turbo NAS.
Note: Use ONLY English alphabet for folder names and no special characters when
creating new folders.
5.1 How to crate user.
Click on the “Add” button. Type new account name, password and click “OK”.
Eg: “User1” for demonstrations.
In the same time, Turbo NAS will also crate a SAMBA folder named “User1”, click “Modify”
to share the folder.
Select “User1” and add it into “Sharing List”.
You can “Run” from window start button, type \\ follow by the IP address
(eg:\\, and click “OK” to continue.
Type “User1” and password to login.
Now you have set up the folder that you wish to share on your Turbo NAS. The shared
folder can be accessed from other computer on your local network.
5.2 How to modify account password
Select the “User1” and than click “Modify”.
Enter new password and click “Apply” to save setting.
5.3 How to delete a SMB (SAMBA) account
Select an account you wish to delete, click “Delete” to proceed. Please note that all the
data inside the folder will be lost after the delete.
6.0 FTP Server
Remember to “Enable” the FTP service on the status page, when you plan on using the FTP
- FTP server configuration: The standard port for FTP service is 21. If required, you can
change it into any port ranging from 1025-6550. But in general, we recommended using the
default port of 21.
- File language support: By default, the encoding is set to English. If you want to store
or transfer files with a different encoding (different language), choose the corresponding
language from the drop down list. In order to transfer and view the files correctly, it
is important that you select the correct language!
- Anonymous: By default an anonymous user name has been created, it allows FTP users
to login without username and password. For security reasons, it is best to add a password!
Note: To be able to share FTP resource via internet, you need a router to assign the
external IP to your Turbo NAS. Contact your router vendor on how to assign the external IP.
6.1 How to crate FTP account
FTP server allows you to share your data through internet, so an internet resource and
router is required before setting up FTP server.
Select FTP server and clicks “add” button and enter a name and password for the new FTP
account and click “OK”. to continue.
In the account list, you can see an overview of the existing accounts and status. For FTP file
transfers, we recommend to use other dedicated FTP client software e.g.: SyncQuick FTP,
Cute FTP etc.
Note: When creating FTP accounts, please use ONLY English alphabet and no special
character or space for FTP account name.
6.2 How to delete FTP account
In the “Account List”, you can see an overview of the existing account and status; you can
change them at any time by selecting the account and modifying, disabling or deleting it.
Note: Deleting a folder will also erase all the files stored inside that folder.
7.0 Media server
The Media server on Turbo NAS can be used to share your photo and music files with a
XBOX360 video game console from Microsoft that is connected to the same local network.
Before you start, make sure both devices are connected to the same local network and
turned on.
On your Turbo NAS, go to the XBOX360 media page and make sure photo and are set to
share folder and not disable, e.g. the “PUBLIC” is enabled Photo directory.
Go to media, select either Music or Pictures, and press A to continue on your XBOX 360.
Press X to change the source and select your network drive, it should show up as storagexxx and display the folder that you have set up earlier on your Turbo NAS.
Inside the shared folder, you can access to your picture or music files, depending on which
mode you are currently using. Select the files you would like to see or to listen, and start
8.0 Printer Server
1. Install your Printer driver into your computer, (for example. if Epson PL-6200L Printer is
connected to the NAS, you must install PL-6200L driver in to the computer first). After
driver installation, please click “Start” → “Setting” → “Printer and Faxes” → “Add a
printer”→ “Next”.
2. Connect the USB printer in to NAS Dongle, your network environment should looks like
diagram below:
3. Select “Local printer” and click “next” to continue.
4. Select “Create a new port type of port:” , choose “Standard TCP/IP Port”, and click
“next” to continue.
5. Enter the NAS Dongle IP address than click “next” to continue.
6. Select “Custom” and go to “setting”.
7. Select LPR in protocol, and give a queue name eg:LRxxx; select LPR byte enable and
click “OK” to finish the port setting.
8. Click “Finish” to complete TCP/IP printer setup.
9. Go to Pinter server page and check printer server status. If status shows “OK”, the
printer is setting up successfully.
Notes: The NAS Dongle Printer server does not support GDI/Host-based printers. For some
Multi Function Printers (MFP); scanning functions might not be functional probably. Please
contact Printer Manufacture for detail Specifications.
9.0 Bit Torrent server
NAS Dongle supports Bit torrent download independently without using PC resource.
Maximum of 4 bit torrent downloads can be running at the same time.
1. Select “Bit torrent” server, choose the “Download Path” you wish to use, then click
“Apply” to save setting. (DO NOT change path setting while perform BT downloading,
otherwise downloaded job will be missing).
2. Server port range can be chosen from 6881 to 65535. (6881 is the default setting)
3. Create a upload speed limit: 0=unlimited upload speed (4 KBps is the minimum speed),
and click “set” to save setting.
4. Click “Browse”, select .torrent file, and upload to the download queue.
Note: The jobs listed in the Download Queue will be removed when NAS dongle is turned
off or USB storage is removed.
9.1 Mail Notification
After the download is successful, an email will be send to designated email address. Click
“Mail setup” , input SMTP server, recipient email, SMTP A/C, Password, and click “Apply”
to save setting.
10.0 Mac installations (Mac 10.5.4 or above)
Open Mac browser “Safari” and key-in the host name of the NAS Dongle (for example,
“strage-0000”). It will detect NAS Dongle automatically.
10.1 How to setup SAMBA in Mac OS X 10.5.4
1. Click “Go” on the toolbar, and select ”Network” as the screenshot shown below.
2. Double Click “WORKGROUP” (or the correct group name of NAS Dongle), you will find
NAS Dongle “STORAGE-xxxx” (or the correct name of NAS Dongle).
3. Click on the storage-xxxx (or the correct name of NAS Dongle).
4. Select the folder you wish to share, and click “OK” to share the folder
5. Click “OK” to show the folder in the Desktop.
11.0 How to map your NAS Dongle as a Network Drive to your computer system
(Showing NAS disk drive in network).
Press “Start” button on Windows desktop
Press “Search”
Select Folders
Select Computer or people
Select a computer on the network and a new window will appear.
Key in the host name, (For example “storage-xxxx”) in the “Computer name” column
and then press “Search” button. You will see the following window.
7. Point to the “Storage-xxxx”, double click the mouse. Choose the folder you wish to map,
click mouse on its right button and click “Map Network Drive”.
Note: For faster connection and usability, we recommend that you map folders which you
used constantly as network drives. This creates a direct access to the shared folders on
NAS from My Computer.
12.0 Q&A
Q: What is NAS Dongle default IP?
A: The default IP address for NAS Dongle is or enter “storage” in IE bowser bar
to search for it.
Q: What is NAS Dongle default login name and password?
A: Our NAS Dongle default Login name: “admin”, default password: “admin”.
Q: Forgot my login password, How should I do?
A: 1. Press the reset button and keep that position.
2. Unplug and reconnect the power.
3. Wait for 30 seconds, and then release the reset button.
4. NAS Dongle will go back to factory defaults.
PS: Besides SAMBA/FTP account setting will still remain in the NAS Dongle, rest of setting
will go back to factory default.
Q: Why can’t I create/share folders in SMB or FTP server?
A: To avoid languages support issue, you are suggested to create/share folders with English
characters only.
Q: Why can’t I upload the files via LAN connection or got disconnected?
A1: Please make sure the networking is connected properly and you have the access right
(read & write) for the folders.
Q: How to setup NAS Dongle to be in daylight saving time?
A: NAS Dongle does not support Daylight saving time setting.
Q: Why WinXP can not enter SMB folder with password via NAS Dongle?
A: Please update Win XP to SP2 or above. After update, please make sure if you have
installed Norton Internet Security, if you do, please check with Norton service center.
Q: What Operating Systems does NAS Dongle support?
A: NAS Dongle supports Microsoft Windows 2000 / XP / Vista and Apple Macintosh OS
10.5.4 above.
Q: How do I access NAS Dongle via the Internet?
A: If your NAS Dongle is using a fixed public IP, please perform the following steps.
- Enter the management web base of NAS Dongle, and go to the FTP Server page to
enable FTP Status.
- Create user account and limits of authority.
- Open Microsoft Internet Explorer or other FTP client software (recommended), and enter
ftp:// NAS Dongle IP in the IP address field.
Q: Why FTP can not link to NAS Dongle or show link time out when using IE?
A: Due to IE FTP is not compatible with some Routers, you are suggested to use FTP client
software to start with. If you would like to use IE FTP to link to NAS Dongle, please refer to
following steps:
- Please open port 21 and 20 on Router and link to NAS Dongle.
- Open IE > Tool > Internet Options>Advance
- Click "Enable folder view for FTP site" and click "OK"
Q: Why my FTP client software can not link to NAS Dongle or fail during file
A: Due to software design, it’s possible that certain FTP software is not compatible with NAS
Dongle. NAS dongle is tested with most of popular FTP software such as CuteFTP or
SyncQuick FTP.
Q: What is the limitation of user to login FTP and Samba server?
Samba Server
FTP Server
Maximum User
User Level Access(maximum create 16 user account, 16
folder share by one account)
maximum create 16 user account,16 folder share by one
FTP 8 User/Samba 8 User (Total 64 TCP connection at the
same time)
Q: Any limitations for NAS Dongle file name length?
A: The limitation of length of file folder is 12 bytes.
Q: What can DHCP do as well with NAS Dongle?
A: You can setup NAS Dongle as a DHCP server if there is no any other DHCP Server exists
in your local network. Otherwise, NAS Dongle will automatically turn off its DHCP server
function and become a DHCP client. For example, if you have installed a router with built-in
(activate) DHCP Server, NAS Dongle will automatically setup itself as DHCP client.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF