advertisement
No1.
IP Camera Fast Operation User Manual
IP Camera not only can capture images as well as cctv cameras,but also has built-in digital compression controller and WEB-based operating system, making the video data compression and encryption, through LAN, Internet or wireless networks sent to end users . IP Camera can be connected directly to
TCP / IP digital network, so the main function of this system is the above network - Internet or internal network for video and audio transmission. And there are other functions, two-way audio, WIFI,3G, SD card storage, mobile phone monitoring, PTZ, IR, alarm input & output, UPNP, motion detection, email alerts etc....
No2.
Part 1. IP Camera Connection Diagram
Picture 1 HD Box IP Camera Connection Diagram
No3.
Picture 2 (1) H.264 Robot IP Camera
Picture 2 (2)IR Waterproof IP Camera
No4.
Power Port: DC power supply Status Indication Light:
Red - power on or alarm activated
Green - normally Working or Record
Alarm Input: normal open(default) and close
Alarm Output: alarm activated output
RS485: PTZ or other RS485 devices
Reset:,Press on 5seconds to reset to factory default settings,include IP settings
Audio Input: connect with audio picker
Audio Output: connect with speaker
Video Output: BNC/TV output,use for adjust camera and view IP settings
Antenna: use for 3G and WIFI
No5.
Part 2. WEB MONITOR
Step 1. Let IP camera connect to computer directly by a net cable(if successful, netcard will light yellow color and green color flicking)
Step 2. CD->English->Software, find UpgradeTool and install it
Step 3. Run UpgradeTool, click "IP Search", then IP address will come out
Step 4. Select the IP address,then click "Edit Device",set "Subnet Mask" and "Gateway", they need to be the same as your router, see picture 3 as right.
No6.
Picture 3 Edit Device
Factory default setting
IP address: 192.168.1.10 Subnet mask: 255.255.255.0
Gateway: 192.168.1.1 User name: admin no password
ARSP :http://xmsecu.com:8080
ARSP user name: serial number no password
Picture 4 Local BNC output
Note: Local BNC output can help user to adjust camera settings(shown only 30seconds,then it will disappear),see picture 4 as right.
No7.
Step 5. Open IE browser and visit the IP camera(for example http://192.168.1.10),then login with user name and password,see picture 5 as
Picture 5 WEB login interface Login successfully,see picture 6 as below:
Picture 6 WEB monitor interface
No8.
Playback: 2 playback modes---by file or time
Log: Showing operating log of IP camera
LocalCfg: Set alarm and actived to remote PC
DeviceCfg: Set IP camera local setting,like Record,Alarm,System,Advanced,Info etc...
Channel Control:
Open video: choose the IP camera,then click to open the channel
Close video: click to close the channel
Note: this is only fast user manual, for more details, please refer to CD.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project