Installation Manual FEA20M ELECTRIC STRIKE

Installation Manual FEA20M ELECTRIC STRIKE
Installation Manual FEA20M ELECTRIC STRIKE
PRODUCT
FEA20M is a monitored Electric Strike to replace the old PADDE EA Electric Strike. The
strike is a modified version of the FSH FES20M product. A small modification on the
frame has to be made to replace existing old PADDE EA strikes.
WIRING
Connect the wiring according to list below:
NOTE
FEA20M Series Electric Strike factory setting is Power to Lock (PTL).
The control circuit for the door strike is protected against reverse polarity connection.
No additional diode protection required.
The product must not be installed in applications where it will be exposed to wind
and weather (external gates etc.).
PRODUCT DIMENSIONS
INSTALLATION
CUT-OUT DIMENSIONS AND MOUNTING TEMPLATE (not to scale)
6.2mm
7.0mm
POSITION OF DOOR LATCH
As drawn in the diagrams, there should be a 1mm gap between the door latch and
the front face of the strike keeper, preventing the door from creating back pressure
on the strike keeper when the door is closed.
WARRANTY
FSH Fire & Security Hardware Pty Ltd (FSH) warrants this product against faulty
workmanship and materials for a period of 5 years. The warranty does not cover fair
wear and tear. The product must be installed according to FSH specifications.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement