Network Mini Dome Camera Installation Manual

Network Mini Dome Camera Installation Manual
Network Mini Dome Camera
Installation Manual
Thank you for purch asing our product . If there are any questions,
requests, please do not hesitate to contact the dealer.
This man ual appl ies to the VSIP2MPVDMINI Network Camera.
or
This manual may contain sev eral technical incorrect places or pri nting
errors, and the co ntent i s subj ect to change without noti ce. T he
updates will be added to the new version of this manual. We will readily
improve or update the products or pro
cedures described i n the
manual.
1
Installation Manual of Network Mini Dome Camera
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly
to avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Seri ous injury or death may be caused if any of these warnings are
neglected.
Cautions: Injury or equi pment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards
to prevent serious injury or
death.
Cautions Follow these precautions
to prevent potential injury or
material damage.
Warnings:
1. In the use of the product, you must strictly comply with the electrical safety
regulations of the nation and region.
2. Source w ith DC 12V according to the IEC60950-1 standard. Please refer to
technical specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload
may cause ov er-heating and can be a fire hazard.If use the POE as the power
supply, please make sure that the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is i nstalled on a wall or ceiling, the dev ice should be fi rmly
fixed.
6. If smoke, odor, or noi se r ise fr om the device, turn off the power at once and
unplug the power cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
2
Installation Manual of Network Mini Dome Camera
maintenance.)
3
Installation Manual of Network Mini Dome Camera
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch sensor modules with fi ngers. If cleaning is necessary, u se a clean
cloth with a b it of ethanol and wipe it gently. If the camera wi ll not b e used for
an extended period of time, put on the lens cap to protect the sensor from dirt.
4. Do not aim the ca mera at the sun or ex tra bright places. A bloomi ng or smear
may occur otherwi se (whi ch i s not a ma lfunction howev er), and affecti ng the
endurance of sensor at the same time.
5. The sensor may be burned out by a lase r beam, so when any laser equipment i s
being used, make sure that the surface of the sensor will not be exposed to t he
laser beam.
6. Do not place the camera in extremely ho t or cold temperatures (the operati ng
temperature should be between -10°C ~ 60°C, dusty or damp locations, and do
not expose it to high electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating
environment.
8. While shipping, the camera should be pa cked in its original packing, or packing
of the same texture.
9. Regular part replacement: a few parts (e.
g. electrolyti c capac itor) of the
equipment should be replace d regularly according to the ir av erage l ife time.
The av erage time v
aries because
of di fferences between operating
environment and usage history, so regular checking is recommended for all users.
Please contact with your dealer for more details.
4
Installation Manual of Network Mini Dome Camera
Table of Contents
Chapter 1 Introduction .....................................................................................1
1.1 Network camera Functions and Features..........................................1
1.2 Applications ............................................................................................1
Chapter 2 Installation ........................................................................................2
2.1 Camera Description ..............................................................................2
2.1.1 Camera Physical Description ......................................................3
2.1.2 Camera Connection ....................................................................4
2.2 Hardware Installation.............................................................................5
Appendix Product Specification .....................................................................8
VSIP2MPVDMINI.............................................................................................8
Specification.........................................................................................8
Dimensions ............................................................................................9
1
Installation Manual of Network Mini Dome Camera
Chapter 1 Introduction
Network camera i s a ki nd of embedde d d igital sur veillance product that
combines the features of both trad itional analog camera an d network DVS (D igital
Video Server). Due to the embedded Linux operation system and the latest Davinc i
hardware platform of TI, th e system op erates wi th high scheduling effic iency.
Furthermore, the fi rmware is burned i n the flash, whi ch makes the product small,
reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
 Network Functi on: Support the T CP/IP pr otocols (DDNS, PPPoE, FT P, SMT P, NTP ,
HTTPS, SIP addible) and IE browsing.
 Heartbeat Function: The server can acquire real time operating performance of
the network camera through the heartbeat function.
 Alarm Function: Supports Motion Detection.
 User Management: Support multilevel right management. The administrator can
create up to 15 separate user s with d ifferent right lev els, which highly improves
the system security.
Compression Functions:
 Support 1 channel v
ideo si gnal an d standard H. 264 v ideo encodi ng
compression, whi ch supports both v ariable bi t r ate and var iable fr ame rate;
besides, you can self-define both the video quality and its compressed bit rate.
Remote Control:
 The product offers a 10M/100M self-adaptive Ethernet interface.
 Support various protocols.
 Set the parameters, browse real time videos or check the camera performance
through software or IE, and store the compressed bit rate through network.
 Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for supermarkets and factories.
2. Remote surveillance for homes and offices.
3. Indoor monitoring scenes, such as hotel, corridor, stairway.
2
Installation Manual of Network Mini Dome Camera
Chapter 2 Installation
NOTE:
1. Please check i f all the items on the pa ckage li st hav e bee n i ncluded wi th
your camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prev ent an y dama ge cause d by m ismatching
problems.
5. If the product does not operate properly , please contact your dealer or the
nearest ser vice center. Nev er attempt to d isassemble the camera yourself.
Users are responsi ble for any problem ca used by mod ification or repai ring
without authorization.
2.1 Camera Description
NOTE:The camera supports PoE power supply.
3
Installation Manual of Network Mini Dome Camera
2.1.1 Camera Physical Description
Serial NO.
Description
1
Back box
2
Lens
3
P: Power LED indicator, which turns red when power is applied to the unit.
4
Bottom board
5
Bottom board set screw hole
6
Lens set screw
7
S & L: Network status LED indicator.
When the network is connected, the “S” LED turns orange, while the “L” LED
flickers in green.
8
RESET: Reset all paramaters to factory default settings.
NOTE:
When the camera is power up, press the “RESET” button for a
bout 10 seconds, then all
parameters, including user name, password, IP address, port number, etc., will be reset to the
factory default settings.
4
Installation Manual of Network Mini Dome Camera
2.1.2 Camera Connection
Step1:
Connect one end of the
network cable to the camera
and the other end to PC.
Step2:
Connect one end of the
power cord to the camera
and the other end to power
sokcket to supply power for
the camera.
Step3:
Access the camera ov er IE or
client software to v
iew l ive
video images.
5
Installation Manual of Network Mini Dome Camera
2.2 Hardware Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the
following steps:
NOTE:
If required, user can apply the
pliers to remove the clip (refer to
the part marked in dotted line) on
the side of the back box and then
feed cables through the opening to
secure on the ceiling.
1. Loosen the set screws with a hexagonal screw driver (attached with the camera),
and take down the back box shown as below:
Fig. 2.2.1 Remove the back box
2. Use the screws to fix the bottom board on the ceiling.
Fig. 2.2.2 Fix the bottom board
3. While v iewing the video on the computer , adj ust the camera’s view angle fo r
6
Installation Manual of Network Mini Dome Camera
your need.
Loosen
the lens set screws
Adjust
horizontally and vertically the camera’s
pan and tilt for your need
NOTE:
 As the lens of camera has
already been factory adjusted
to the best imaging effect, thus
it only needs to adjust the pan
and tilt view angle.
 If the image is not clear
without the back box, please
don’t worry, the back box will
affect the imaging effect, so
when you test the imaging
effect of lens, the back box
must be installed to the
camera.
4. Tighten the set screws, and install the back box.
Tighten the lens set screws
7
Installation Manual of Network Mini Dome Camera
Fig.2.2.3 Install the back box
Fig.2.2.4 Done
8
Installation Manual of Network Mini Dome Camera
Appendix Product Specification
96,3039'0,1,
Specification
Model
Parameter
2 Megapixel 1/3” CMOS Vandal-Proof Network Mini Dome
Camera
Camera
Image Sensor
1/3” CMOS
Min. Illumination
Electronic
Shutter
0.5Lux @(F1.2, AGC ON)
1/25s ~1/100,000s
4mm, F1.2 Fixed Iris(2.8, 6, 8mm optional)
Lens
Angle of view: 90°
Lens Mount
M12
Adjustment
Range
Pan±15°, Tilt0 ~90°, Rotation±15°
Day / Night
Electronic
Compression Standard
Video
Compression
Bit rate
Audio
Compression
H.264
32 Kbps~16Mbps
OggVorbis
Image
Max. Image
Resolution
1600 x 1200
Frame Rate
50HZ:12.5fps (1600 x 1200), 25fps (1280 x 720)
60HZ:15fps (1600 x 1200), 30fps (1280 x 720)
Image Settings
Saturation,Brightness,Contrast,Tue adjustable through client
software or web browser
Function
e-PTZ
Intelligent Alarm
Protocols
Basic
Yes
Motion Detection
TCP/IP,HTTP,DHCP,DNS,DDNS,RTP/RTCP,PPPoE,FTP,SMTP,NTP
(SNMP,HTTPS, SIP, SRTP, 802.1x, IPV6 optional )
Initial Set button, Anti-flicker, Dual Stream, Heartbeat, Password
Protection, Watermark
Interface
Communication
Interface
1 RJ45 10M / 100M Self-adaptive Ethernet port
9
Installation Manual of Network Mini Dome Camera
General
Operating
Condition
-10°C~60°C(14°F~140°F), Humidity 90% or less(non-condensing)
Power Supply
DC12V±10% / PoE
Power
Consumption
3W MAX
Impact
Protection
Weather Proof
Dimensions(mm)
Weight
Dimensions
IEC60068-2-75Eh,50J;EN50102, IK10
IP66
100×97.5×46.5(3.94”X3.84”X1.83”)
250g(0.55lbs)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement