AirChek 52 Personal Sample Pump 224

AirChek 52 Personal Sample Pump 224
AirChek 52
®
Personal Sample Pump
Light weight • Light Price • Heavy Duty
AirChek 52
Personal Sample Pump
The AirChek 52 pump is a rugged air sampling pump for evaluating
airborne chemical levels. This battery-operated pump weighs only
20 ounces, and provides constant flow within a range of 1000 to
3000 ml/min reducible to 5 to 500 ml/min with the Constant
Pressure Controller (CPC) and adjustable low flow holder
accessories. Constant flow is maintained up to 25 inches water
pressure at 2000 ml/min within ±5%, and moderated with a builtin pulsation dampener. The AirChek 52 features an LCD time
display which exhibits run time in minutes.
Features
• Simple design, easy to operate
• Lightweight — only 20 ounces
• RFI-shielded case
• Flow compensation
• High and low flow capabilities — meets most IH applications
• LCD with run time, flow fault, and low flow battery indicators
• Fault shutdown with time retention
• UL Listed
• Detachable “quick change” battery pack
Ideal for “on-worker” applications, this sampler can be used
for STEL, TWA, or Ceiling sampling using sorbent tubes,
filters and cyclones, impingers, or long-duration color detector tubes. A model of simplicity and reliability, the AirChek
52 sample pump is the workhorse of air sampling pumps for
industrial hygiene studies or environmental testing. It is so
reliable, we guarantee its performance for a period of one year
from the date of purchase.
RFI and EMI Shielding
SKC’s case material and unique circuitry are designed to
provide shielding from radio frequency in the range of 27 to
1000 MHz. This shielding prevents fluctuations in the flow
caused by electrical effects on the pump’s control circuitry.
Multiple Tube Sampling Capabilities
The AirChek 52 pump can utilize the multiport adjustable
low flow holders to operate up to four sorbent tubes
simultaneously and at different flow rates. With multiple
tube sampling, you’ll reduce time in the field and use fewer
pumps.
AirChek 52 Low Flow Capabilities
The AirChek 52 air sampling pump becomes a fully
versatile sampler with the use of the low flow Constant
Pressure Controller (CPC). The CPC expands the flow
range capabilities of the AirChek 52 sampler to include
the 5 to 500 ml/min range.
This low-cost, lightweight adapter simply fits into the
sampling train tubing allowing the pump to operate in a
constant pressure mode. Adjustable low flow holders can
then be used to collect up to four samples simultaneously
and at different flow rates. The flow rate at each intake
can be set from 5 to 500 ml/min.
Powerful Pneumatics
The powerful AirChek 52 with its modular pneumatic system
provides constant flow in the range of 1000 to 3000 ml/min.
The flow rate can be reduced to the 5 to 500 ml/min range with
the addition of the Constant Pressure Controller (CPC) and
adjustable low flow holder accessories.
Constant Pressure Controller
Protective Cover
for Sample Tube
Tygon Tubing
SKC
Back Pressure Compensation
Flow is compensated within ±5% up to 25 inches water back
pressure at 2000 ml/min, and is moderated with a built-in
pulsation dampener. As back pressure increases, the motor
voltage is automatically corrected to maintain a constant flow
over the operating range, therefore, you will not sacrifice air
volume accuracy even in dusty environments. If the flow is
restricted for more than 15 seconds, the pump will shut down
automatically, the timer will retain the valid run time, and a
flow fault icon will appear on the LCD.
Collar Clip
AIRCHEK® 52
A High Standard of Safety
Intrinsically safe, the AirChek 52 pump is UL Listed for
hazardous atmospheres of Class I Groups A,B,C,D; Class II
Groups E,F,G; and Class III for Temp Code T3C.
Adjustable Low Flow Holder
AirChek 52 with CPC
Lightweight, Durable
Measuring approximately 5 x 3 x 1.75 inches and weighing
only 20 ounces, its small size, light weight, and durable
construction allows the AirChek 52 pump to withstand the
rigors of “on-worker” use, time and time again. Rechargeable
NiCad batteries provide a reliable power source that can be
restored overnight. The AirChek 52 pump is the lightweight,
inexpensive workhorse pump designed for rugged and repeated
use.
A Variety of Ordering Options
The AirChek 52 pump and accessories can be purchased together
in a single or five pack pump kit or separately for a more
customized kit. Accessories include single or 5-station battery
chargers, adjustable low flow holders, impinger holders, protective
nylon carry pouches with shoulder strap and belt, and noisereducing pouch that reduces noise from 62.5 dBA to 55 dBA*.
Note: Kits do not contain all the accessories listed here. See page
4 for ordering information.
Now a full range of flow rates is available in one lightweight,
low-cost, heavy-duty sampler to use with:
* Tested at a one-meter distance with AirChek 52 operating at 2 L/min with
37-mm, 0.8 µm MCE filter cassette in line.
• Filters and cyclones
• Impingers
• Sorbent tubes
• Long-duration color detector tubes
ATEX
Battery Pack
Release Arm
AIRCHEK ®52
Accessory
Mounting Screws
Inlet Port
External Charging
Jack (on rear of
battery pack)
Elapsed Time and
Fault Flow Indicator
Battery Pack
Flow Adjustment
On/Off Switch
AirChek 52 with LCD Indicator (top view).
Note: Control cover not shown
Specifications — AirChek 52
Operating Range:
5 to 3000 ml/min (5 to 500 ml/min requires Adjustable
Low Flow Holder and Constant Pressure Controller)
Storage
Temperature:
-4 to 113 F (-20 to 45 C)
Weight:
20 ounces (566 gm)
Charging
Temperature:
32 to 113 F (0 to 45 C)
Dimensions:
5 x 3 x 1.75 inches; (12.7 x 7.6 x 4.4 cm)
Humidity:
0 to 95% Relative
Compensation
Range: (inches water
back pressure)
1000 ml/min up to 25 inches
2000 ml/min up to 25 inches
3000 ml/min up to 15 inches
Multiple Sampling:
Adjustable low flow holder accessory allows user to take
up to four simultaneous samples. CPC required.
Flow Control:
Constant flow to ± 5% of set point
RFI Shielding:
Flow Fault:
If flow is restricted, pump stops and holds time display
Run-time:
8 hours minimum at 2000 ml/min and 25 inches water
back pressure. Dependent on media used.
• Complies with requirements of EN 55022 1987 Class
B, and EN 50082-1:1992
• Frequency range of radiated susceptibility test was
27 to 1000 MHz.
marked
Additional Features:
LCD Time Display:
3-digit display of run time in minutes
Battery Pack:
Built-in rechargeable NiCad battery pack, 4.8 V, 1.8 Ah
Intrinsically Safe:
Listed for Hazardous Class I Groups A,B,C,D;
Class II Groups E,F,G; Class III Temp Code T3C
ATEX model available. Contact SKC.
•
•
•
•
•
•
•
•
•
•
•
Operating
Temperature:
32 to 113 F (0 to 45 C)
Fully encapsulated electronics for corrosion resistance
Detachable “quick change” battery pack
Simple design—easy to operate
Low battery fault with LED indicator
Built-in pulsation dampener
Built-in replaceable particulate trap
Built-in accessory mount
Smooth surface allows for easy decontamination
Replacement parts in preassembled modules
Quiet operation
One-year limited warranty
Ordering Information
AirChek 52 Pump only (without charger) .......................... Cat. No. 224-52
AirChek 52 Single Pump Kit
Includes AirChek 52 pump with battery pack, single charger, filter
cassette holder, tool kit, operating manual, and carry case.
115 V ........................................................................... Cat. No. 224-52K
230 V ......................................................................... Cat. No. 224-52KB
Low Flow Constant Pressure Controller .............. Cat. No. 224-26-CPC
Adjustable Low Flow Holders
Single ..................................................................................224-26-01
Dual ....................................................................................224-26-02
Tri .........................................................................................224-26-03
Quad ..................................................................................224-26-04
AirChek 52 5-pack Pump Kits
for High Flow Sampling
Includes 5 AirChek 52 pumps with battery packs, filter cassette holders,
screwdriver kits, operating manuals, one five-station charger (100-240 V),
and carry case.
100-240 V .................................................................. Cat. No. 224-52K5
For Universal Sampling
Includes 5 AirChek 52 pumps with battery packs, filter cassette holders,
screwdriver kits, constant pressure controllers, low flow holders with covers (Type A), operating manuals, one five-station charger (100-240 V), and
carry case.
100-240 V ................................................................ Cat. No. 224-52K5D
SKC INC.
SKC SOUTH
863 Valley View Road
Eighty Four, PA 15330
Telephone: 724-941-9701
Fax:
724-941-1369
e-mail: [email protected]
PO Box 2016
Appomattox, VA 24522-2016
Telephone: 434-352-7149
Fax:
434-352-5754
e-mail: [email protected]
SKC GULF COAST
9827 Whithorn Drive
Houston, TX 77095-5027
Telephone: 281-859-8050
Fax:
281-859-1303
e-mail: [email protected]
www.skcinc.com
European Community
For assistance, contact SKC Ltd. at: Unit 11, Sunrise Park,
Higher Shaftesbury Road, Blandford Forum, Dorset DT11
8ST, U.K.
Telephone (01258) 480188 FAX: (01258) 450968
International Sales
Contact SKC International Customer Service at 724-941-9701 in
Eighty Four, PA, USA, for the name of local distributors or assistance with direct shipments.
Publication 1090 Rev 0501
SKC WEST
PO Box 4133
Fullerton, CA 92834-4133
Telephone: 714-992-2780
Fax:
714-870-9634
e-mail:
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement