OMRON CS1W CIF31 USB-Serial Conversion Cable User's Manual

Below you will find brief information for USB-Serial Conversion Cable CS1W CIF31. The CS1W-CIF31 USB-Serial Conversion Cable connects an OMRON PLC (or PT) to a personal computer's USB port. The cable can be used once the required drivers (on the provided CD-ROM) have been installed in the personal computer. The Conversion Cable can be used with OMRON communications software, such as the CX-Programmer, which use the CX-Server or FinsGateway as a driver, as well other OMRON software, such as the DeviceNet Configurator.

PDF
Document
OMRON CS1W CIF31 USB-Serial Conversion Cable User's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Connects PLC/PT to computer's USB port
  • Uses drivers installed from CD-ROM
  • Compatible with OMRON CX-Programmer and DeviceNet Configurator
  • Supports CX-Server and FinsGateway drivers
  • Provides LED indicators for data transfer status
  • 9-pin D-sub connector (male)
  • A plug connector, male

Frequently asked questions

Connect the USB connector of the cable to your computer's USB port. Then, connect the D-sub connector of the cable to the PLC's communication port. Ensure the power supply to the computer or PLC is turned off before connecting the cable.

You need to install the drivers provided on the CD-ROM that came with the cable. The instructions for installing the drivers are found in the manual.

The LED indicators on the cable provide visual feedback on the data transfer status. A flashing yellow LED on the TD indicator means data is being sent from the USB-Serial Conversion Cable. A flashing yellow LED on the RD indicator means the USB-Serial Conversion Cable is receiving data. If the LED is off, it indicates data is not being transferred.
Preparing document for printing…
0%