queue™ (for V1 Driver) (for Vista) Visual Presenter Image

queue™ (for V1 Driver) (for Vista) Visual Presenter Image
queue™
(V4.X)
(for V1 Driver)
(for Vista)
Visual Presenter Image Software
User Manual
Date: 2009/10/23
i
Contents
1.
Introduction ............................................................................................................................ 1
2.
System requirement .............................................................................................................. 1
3.
Automatic installation of queue™ .......................................................................................... 1
4.
Manual installation of queue™ .............................................................................................. 9
5.
Start to use queue™............................................................................................................ 18
6.
Operation ............................................................................................................................. 19
6.1
Main Menu ........................................................................................................................... 19
6.2
Annotation Tools .................................................................................................................. 20
6.3
Camera Settings.................................................................................................................. 21
6.4
Options ................................................................................................................................ 21
6.5
Time Lapse .......................................................................................................................... 22
7.
Descriptions of Functions .................................................................................................... 23
7.1
Start the Visual Presenter.................................................................................................... 23
7.2
I would like to capture images ............................................................................................. 23
7.3
I would like to display the live image ................................................................................... 23
7.4
I would like to freeze the live image .................................................................................... 23
7.5
I would like to annotate the displayed image....................................................................... 23
7.6
I would like to add textual annotation to images.................................................................. 24
7.7
I would like to record video .................................................................................................. 26
8.
Uninstall ............................................................................................................................... 27
8.1
Uninstall queue™ ................................................................................................................ 27
8.2
Uninstall USB Driver............................................................................................................ 28
9.
Troubleshooting ................................................................................................................... 29
9.1
Q: Installation is complete. Reconnect Visual Presenter to show [Found New Hardware]. 29
9.2
Q. No Image display when launch queue™. ....................................................................... 29
9.3
Q: The Annotation tools or Camera Setting is cut off.......................................................... 32
i
1. Introduction
queue™ PC and USB driver which support WIA and TWAIN standards.
2. System requirement
z
z
z
CPU : P4 2.0 GHz and above
RAM : 1 GB
Graphics Card
‹ Graphics Memory: 8M Bytes above
‹ Support DirectX 9
z Resolution : XGA (1024x768) and above
z Free disk space : 100MB
3. Automatic installation of queue™
<Very Important> To ensure successful installation, please make sure each of the
following steps is completed.
3.1.
Remove the USB cable from Computer and Visual Presenter.
8
3.2. Go to Lumens™ website http://www.lumens.com.tw/eng/goto.asp and select the model you
have purchased.
3.3. Find the [ queue 4.x+ Driver] and press
to download.
1
3.4. Press [Save].
3.5. Select the storage location and press [Save].
3.6. After download is complete, press [Close].
2
3.7. After finding [queue_PC_4.0_and_V1_1.10_Setup], double-click it to decompress [Setup.exe].
3.8.
Double-click [Setup.exe] to start the Installation Wizard.
3.9. Select the preferred language and press [Next].
3.10. Press [Next].
3
3.11. Read License agreement and press [Next].
3.12. Click [Next] to install queue™ to the preset directory
3.13. Click [Next] to install.
4
3.14. Press [Install] to begin the installation.
3.15. Press [Finish] to exit the wizard.
3.16. Press [Yes] to create a queue™ shortcut at your desktop.
5
3.17. Press [Next] to start the [Visual Presenter V1 Setup Wizard].
3.18. Press [Next] to install to the recommended directory.
3.19. Press [Next] to start the installation.
6
3.20. Press [Close] to exit.
3.21. Press [Finish] to reboot the system now.
3.22. After reboot, please connect the USB cable on the Visual Presenter and computer.
3.23. Then a window will show up, please select [Locate and install driver software] and select
[Install this driver anyway]
<Very Important> This step will be repeated two times. Please make sure each of
the steps is completed to finish the installation.
7
3.24. Select [Install this driver anyway] again.
3.25. Then a window will show up and click [Your devices are ready to use].
3.25.1. Three USB drivers are shown which means the installation was completed. Then click
[Close]
3.25.2. If three USB drivers are not shown, proceed to the next step (Manual installation of
queue™ )
8
4. Manual installation of queue™
4.1. <Very important > Please make sure the USB cable was connected.
4.2. Go to Lumens™ website http://www.lumens.com.tw/eng/goto.asp and select the model you
have purchased.
4.3. Find the [Visual_Presenter Driver V1_1.1 ] and click
4.4. Click [Save].
9
to download.
4.5. Select the storage location and press [Save] to save the file.
4.6. After download is complete, click [Close].
4.7. Find [Visual_Presenter_V1_1.1_for Manual_Installation] and double-click to decompress it.
4.8. Move the folder [Visual_Presenter_V1_1.1_for Manual_Installation] to [ C:\ ].
10
4.9. Go to desktop and right click on [Computer] then select [Properties].
4.10. Click [Device Manager] .
4.11. Click the [Other devices] to show the [Unknown driver].
4.12. Right click on [Unknown driver] then select [Update Driver Software].
11
4.13. Click on [Browse my computer for driver software].
<Very Important> This step will be repeated three times. Please make sure the step
is complete to finish the installation.
4.14. Click [Browse] and choose [Visual_Presenter_V1_1.1_for Manual_Installation] then click
[Next]
4.15. Select [Install this driver software anyway]
12
4.16. Click [Close]
4.17. Click [Locate and install driver software (recommended) ]
4.18. Click [Don’t search online ]
13
4.19. Click [Browse my computer for driver software(advanced)]
4.20. Click [Browse] and choose [Visual_Presenter_V1_1.1_for Manual_Installation] then click
[Next]
4.21. Select [Install this driver software anyway]
14
4.22. Click [Close]
4.23. Click [Don’t search online ]
4.24. Click [Browse my computer for driver software(advanced)]
15
4.25. Click [Browse] and choose [Visual_Presenter_V1_1.1_for Manual_Installation] then click
[Next]
4.26. Select [Install this driver software anyway]
4.27. Click [Close]
16
4.28. Verifying the installation was completed.
4.28.1. Go to desktop and right click on [Computer] then select [Properties].
4.29. Click [Device Manager] .
4.30. Click [Imaging devices] then show the [Visual Presenter V1] and [Visual Presenter V1
Memory]. if there is no two drivers, please contact your dealer or service center.
17
5. Start to use queue™
5.1. Double-click the queue™ icon on the desktop to launch queue™..
5.2. Click the queue™ icon to launch main functions menu
Æ
18
6. Operation
6.1 Main Menu
LAMP:
POWER:
Turn the lamp
Turn the visual presenter on / off
AUTO TUNE:
on / off
PREVIEW:
Automatically adjust the image for
best possible quality.
OPTIONS:
Display live images
BRIGHTNESS:
Select video compression method
and the audio source.
MAIN:
Adjust image brightness
ZOOM:
Launch the main functions menu
Right click on this icon to show
information about the queue.
Zoom in/out from the image
CAMERA SETTING:
ADVANCE:
Launch the Camera Setting window
to adjust live images
Launch the advanced functions menu
ANNOTATION:
FREEZE:
Display annotation tools
Freeze a live image
CLOSE:
TIME LAPSE PHOTOGRAPHY:
Close the advanced functions menu
Capture images at a pre-set intervals
CAPTURE:
RECORD:
Capture still images
Record videos
19
6.2 Annotation Tools
ICON
Description
Pointer tool
Laser tool
Insert text
Draw a line
Draw an ellipse
Draw a rectangle
Free-hand drawing tool
Eraser
Clear all
Select pen color
Select line thickness
20
6.3 Camera Settings
Control the live image via the Camera Settings interface. The operating procedure is the same
as the remote control and control panel of the Visual Presenter. Refer to the Visual Presenter
user manual for more information.
<Note> The display of the button may vary depending on product functions. An inactive
button will grey out.
6.4 Options
21
¾
Video Compress Codec Format:Set
the video format.
¾
<Note>You need to enable the
[Enable Video Compress] before
setting.
¾
Enable Video Compress:Enable the
video format setting.
¾
Enable Audio Recorder:Enable the
audio record device and set the audio
source.
6.5 Time Lapse
Select file directory to change
the default.
Specify a file name..
Set the start time.
Capture images at a pre-set
intervals .
22
7.
Descriptions of Functions
7.1 Start the Visual Presenter
7.1.1
Click
7.2 I would like to capture images
<NOTE> You can click
refer to 6.5 Time Lapse.
to change time lapse setting, more details please
7.2.1
Click
then a Save As window will be displayed.
7.2.2
Key in the file name then click [Save].
7.3 I would like to display the live image
7.3.1
Click
to display the live image.
7.4 I would like to freeze the live image
7.4.1
Click
to freeze the live image of queue™.
7.5 I would like to annotate the displayed image
7.5.1
Click
to open the annotation tools.
7.5.2
The default mode is [Pointer Tool]. You can select another annotation tool.
23
7.5.3
Select a color for drawing.
7.5.4
Set the value of Line width (If the value is higher, the line is thicker).
7.5.5
Mark or annotate the displayed image.
<Remark> You can Click
to capture images that you draw.
7.6 I would like to add textual annotation to images
7.6.1
Click
to open the annotation tools.
7.6.2
Select [Text Tool].
24
7.6.3 The [Text Tool] window will pop up when you click the screen for the text to be added in.
7.6.4 Enter the text in blank fields and click [OK].
7.6.5 Click [T] to change font’s settings (size/color/effect).
<Remark> You can Click
to capture images that you draw.
25
7.7 I would like to record video
7.7.1 Click
to open the video tool.
to change video format and audio source setting,
<NOTE> You can click
more details please refer to 6.4 Options.
7.7.2 Click [Record] then a window will be displayed.
7.7.3 Key in the file name then click [Save] to start recording. <insert image>
7.7.4 Click [Stop] to stop recording.
26
8. Uninstall
8.1 Uninstall queue™
8.1.1
Select [Uninstall queue] in the [Program] to uninstall.
8.1.2
Press [Yes] to completely remove the application.
8.1.3
Press [Finish] once the uninstallation is completed.
8.1.4
Press [Finish] to reboot the system.
27
8.2 Uninstall USB Driver
8.2.1
[Program] Æ [Control Panel] Æ [Add or Remove Programs].
8.2.2
Find Visual Presenter V1, , and then press [Uninstall].
8.2.3
Press [Yes] to uninstall Visual Presenter V1.
8.2.4
Press [OK] then please reboot your PC.
28
9. Troubleshooting
9.1 Q: Installation is complete. Reconnect Visual Presenter to show [Found
New Hardware].
Solution:
1.
Press [Cancel] to skip this interface.
2.
Please switch to another USB port of the computer until [Found New Hardware] does
not show up anymore.
If it appears again, return to Step 1.
3.
9.2 Q. No Image display when launch queue™.
Solution:
1.
2.
3.
Please check if USB cable is connected between document camera and computer.
Please try to change the DIP switch setting to [XGA] mode. Refer to the Visual Presenter
user manual for more information.
Please make sure the driver installation is successful.
„ Right click on [Computer] on you desktop.
„
Select [Properties] from the list.
29
„
You will see below image that Hardware tab highlighted, Click on the [DEVICE
MANAGER] button.
„
A box should open up as shown. [Device Manager] contains all your hardware that
you have installed.
If you can see [Visual Presenter V1] and [Visual Presenter V1 Memory] under
[Image devices] when you connect USB cable between document camera and
computer, it means the installation is successful.
4.
Please confirm if you turn on [Hardware acceleratio.n].
„ Go to desktop and right-click [Properties].
„
Click [Display Setting]
30
„
Click [Advanced Setting]
„
[Troubleshoot] to turn the [Change settings].
„
Adjust the value to [Full].
.
31
9.3 Q: The Annotation tools or Camera Setting is cut off.
. Solution:
1.
Click on the control panel
2.
Now type [Adjust font size] in the search box. It will take you directly to the link for the
[Utility].
32
3.
Click on [ Default scale (96 DPI)…..] which is normal font size and click [OK ] .
33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement