Operating Instructions Dishwasher

Operating Instructions Dishwasher
Operating Instructions
Dishwasher
Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfil your needs for many years to come.
Scandinavian design combines clean lines, everyday functionality and high quality. These
are key characteristics of all our products and the reason they are greatly appreciated
throughout the world.
To get the most from your new dishwasher, we recommend that you read the operating
instructions before using the dishwasher. The operating instructions also include information
on how you can help protect the environment.
ASKO D5434
Operating Instructions
Contents
Before washing for the first time
Read the operating instructions
Be careful with certain materials
Checking water hardness
Safety instructions
General
Installation
Winter storage/Transport
Overflow guard function
Cleaning
Packing material
Disposal
Child safety
Child safety and dishwashing
Activate the child safety lock
Activate child lock (button lock)
Dishwasher components
Dishwasher baskets
Front panel
Dispenser
Economic dishwashing
Fragile dishes
Dishwashing
Load the baskets correctly
Add detergent
Select the program
Select options
After dishwashing
Settings
Time remaining
Care and cleaning
Rinse aid
Error messages
Troubleshooting
Technical information
Information for test institute
Technical data
2
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
6
7
9
10
11
12
13
13
13
14
16
17
18
19
20
23
24
25
28
28
29
Installation
Safety instructions
Suggested machine installations
Adjust the height and slide the
dishwasher into place
Drainage connection
Connection to water supply
Electrical connection
Adjusting the plinth (only when
using toe kick accessory)
Set the correct plinth depth as
follows
Screwing the dishwasher into
place
Service
Quick guide
30
30
31
31
32
32
33
33
34
34
35
36
Before washing for the first time
Read the operating instructions
Read through the operating instructions before using
the dishwasher, especially the sections Safety
instructions, Child safety and Dishwashing.
Be careful with certain materials
Read the section Fragile dishes before dishwashing
porcelain with unglazed decoration or other utensils
made from plastic, wood or crystal that you value.
Checking water hardness
Contact the local water utility to check the water
hardness in your area. This is important with regard
to how much detergent and rinse aid to use.
3
Safety instructions
General
Winter storage/Transport
• Read the operating instructions and keep them in
a safe place!
• Never use the dishwasher for any purpose other
than that specified in these operating instructions.
• Do not load the dishwasher door or dishwasher
baskets with anything other than dishes.
• Never leave the dishwasher door open as
someone may trip on it.
• Use only dishwasher detergent!
• Place knives and other sharp items so that they
cannot harm anyone or damage the dishwasher.
• The machine is not designed to be used by
persons (even children) that are physically or
mentally handicapped or lack experience and
knowledge. Such persons must receive instruction
in how to use the machine from the person
responsible for their safety.
• Damaged mains cables must only be replaced by
a qualified electrician.
• This dishwasher is for household or similar use,
such as:
- staff kitchens in shops, offices and other
workplaces.
- farms.
- for guests at hotels, motels and other types of
accommodation.
- bed & breakfast hotels.
• Store the dishwasher where the temperature
remains above freezing.
• Avoid long transport distances in very cold
weather.
• Transport the dishwasher upright or laying on its
back.
• Never place dishes with solvent residues in the
dishwasher due to the risk of explosion. Nor may
dishes that contain ash, wax or lubricants be
washed in the dishwasher.
• Young children should be supervised to ensure
that they do not play with the appliance.
• The appliance is not intended for use by young
children or infirm persons without supervision.
Installation
See the section Installation.
4
Overflow guard function
The overflow protection starts pumping out the
machine and turns off the water supply if the water
level in the dishwasher exceeds the normal level. If
the overflow protection is triggered, turn off the water
supply and call the service division.
Cleaning
When cleaning the edge around the door, use only a
slightly damp cloth. Do not spray water around the
edge! Moisture can make its way into the lock, which
contains electrical components.
Packing material
Sort waste materials in accordance with local
guidelines.
Disposal
• When the dishwasher has reached the end of its
service life and is to be disposed of, it should
immediately be made unusable. Pull out the power
cable and cut it as short as possible.
• The dishwasher is manufactured and labelled for
recycling.
• Contact your local authority for information about
where and how your dishwasher should be
correctly recycled.
Child safety
Child safety and dishwashing
Activate the child safety lock
• Use the knife stand for all long/sharp items.
• Always close the door and start the program
immediately after you have added the detergent.
• Keep children away from the dishwasher when
the door is open. Some detergent may remain
inside!
• Do not allow children to use or play with the
dishwasher. Be especially vigilant when the door
is open.
(only certain models)
WARNING!
Children must be supervised –
dishwasher detergent is corrosive!
Store detergent and rinse aid out of the reach of
children! If anyone swallows dishwasher detergent,
they should immediately drink one or two glasses of
milk or water. Do not attempt to induce vomiting.
Contact a doctor! If anyone gets dishwasher
detergent in their eyes, rinse (for at least 15 minutes)
with plenty of water.
WARNING!
Dishwasher detergents are strongly alkaline. They
can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.
A child safety lock is fitted to prevent children from
opening the dishwasher door. To activate the child
safety lock, press in the door latch and use a
screwdriver to turn the screw slot (top left-hand
corner) to a vertical position. To open the door, you
must press the white plastic catch (illustrated below)
to the left while pressing the door latch up. Reset by
turning the screw slot back to a horizontal position.
Locked
Open
Activate child lock (button lock)
You can activate the child lock (button lock) to prevent
children from starting the dishwasher (see the section
Settings).
Check that the detergent compartment is empty after
completion of the wash cycle.
5
Dishwasher components*
5
6
7
6
1
2
8
3
9
4
1.
2.
3.
4.
5.
Filters
Cutlery basket
Detergent compartment
Main power switch
Upper basket
10
6.
7.
8.
9.
10.
*Specifications may differ depending on the model and market.
6
Spray arms
Serial number plate
Lower basket
Rinse aid compartment
Panel
Dishwasher baskets*
Upper basket
1
2
1. Wine glass shelf
2. Cup shelf
3. Knife guard
3
Lower basket
1
2
1
1. Fold-down plate support
2. Forward mount for plate support (used for plates
with a diameter greater than 25 cm)
3. Handle
3
2
Cutlery basket
a
b
c
*Specifications may differ depending on the model and market.
7
Dishwasher baskets*
Cutlery basket with lid
a
b
c
Positioning of cutlery basket lid (in upper basket)
The cutlery basket lid can be removed and used, for example, as an extra cutlery basket in the upper basket (see
below).
a
b
c
*Specifications may differ depending on the model and market.
8
Front panel
The panel is fitted with touch buttons with audible feedback (see the chapter Settings).
4
5
10
6
3
11
START
STOP
7
2
PROG
13
1
8
1.
2.
3.
4.
5.
6.
7.
Program selector
Auto wash
Heavy wash
Normal wash
Eco wash
Quick wash
Rinse & Hold
9
14
12
8.
9.
10.
11.
12.
13.
14.
Temperature
Drying
Start/Stop
Display
Delayed start
Child lock (button lock)
Rinse aid indicator
NOTE!
• Keep the touch buttons clean and free from grease. Wipe them clean with a dry or slightly damp cloth. Never
use cleaners – they can scratch the surface. Use the main power switch to turn off the dishwasher before
cleaning the touch buttons to avoid activating any buttons unintentionally.
9
Dispenser
1
3
2
1.
2.
3.
4.
5.
4
10
5
Prewash detergent compartment
Main wash detergent compartment
Rinse aid compartment
Detergent compartment lid
Rinse aid compartment lid
Economic dishwashing
Run programs only with a full load
Wait to run a program until the dishwasher is full. This
way you save energy. Use the Rinse & Hold program
to rinse the dishes if there are any unpleasant odours
while you wait for the dishwasher to become fully
loaded.
Run programs at a lower
temperature
If the dishes are only slightly dirty, you can select a
lower temperature with certain programs. See also
the section Select options in the chapter Dishwashing.
Select a program with Short dry
To save energy, use Short dry. The drying result will
be better if, once the program is finished, you leave
the door slightly open.
Do not rinse under running water
Simply scrape off large food particles before loading
the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal
power to heat your home. Choosing a hot water
connection cuts program times and reduces the
dishwasher's electricity consumption.
11
Fragile dishes
Some cookware is not dishwasher safe. This can be
for several reasons. Some materials cannot withstand
strong heat, others can be damaged by dishwashing
detergent.
Fragile decoration
Porcelain with decoration on top of the glazing (the
items feel rough) should not be washed in a
dishwasher.
Crystal/Glass
Position items so that they do not touch each other
during the wash. Use the lowest possible wash
temperature and the shortest possible program.
Select Short dry. Antique and very fragile items should
not be washed in a dishwasher.
Glass washed in a dishwasher at high temperatures
can gradually develop a grey film that cannot be
removed. Wash fragile glasses at a low temperature
and with a small amount of detergent.
Silver
Silver and stainless steel items should not come into
contact, as the silver can become discoloured.
Cutlery with glued handles
Some types of glue are not dishwasher safe. In such
cases, the handles may loosen.
Wood
Wooden items should only be washed in a dishwasher
if marked dishwasher safe.
Aluminium
Aluminium can lose its shine if washed in a
dishwasher. However, good quality aluminium pans
can be washed in a dishwasher, even if some of the
shine will be lost.
Plastic items
Avoid washing plastic items that cannot withstand
high temperatures.
12
Dishwashing
Below are step-by-step instructions to help you
achieve the best possible dishwashing results.
1
Load the baskets correctly
Do not rinse dishes under running water before
loading them in the dishwasher. Simply scrape
off large food particles before loading the dishwasher.
See the section Fragile dishes if you want to wash
items that may be considered fragile.
Upper basket
Place glasses, cups, bowls, side plates and saucers
in the upper basket. Wine glasses are placed on the
wine glass shelf and knives are placed in the knife
stand on the right (if fitted).
NOTE!
All dirty surfaces should face inwards and
downwards!
Cutlery basket
Place cutlery with the handles facing down, except
for knives, and spread them out as much as possible.
Ensure that spoons do not stack inside each other.
The cutlery basket is placed in the lower basket.
WARNING!
Knives and other pointed items must be placed with
the points down in the cutlery basket or horizontally
in other baskets.
Do not place cutlery made of different materials, such
as silver and stainless steel, in the same place (risk
of discolouration).
The cutlery basket has a fold-down section in the
middle for small items, or small shafts, such as electric
whisk attachments.
2
3
Check that the spray arms can
rotate freely
Add detergent
Detergent is added according to water
hardness.
Follow the instructions on the detergent packaging.
Lower basket
Place plates, side plates, serving dishes, pots and
cutlery (in the cutlery basket) in the lower basket.
Lower the fold-down plate supports when washing
pots.
Too much detergent can result in less effective
dishwashing and also entails greater environmental
impact.
Add the detergent to the detergent compartment.
There is one compartment for the prewash and one
for the main wash (see the section Dispenser). If
tablets are not used, add a small amount of the
detergent to the prewash compartment. Contact the
detergent manufacturer if you have any questions
about the detergent.
WARNING!
Children must be supervised – dishwasher detergent
is corrosive!
13
Dishwashing
NOTE!
Use only dishwasher detergent! Washing up liquid
must not be used as the foam that forms prevents
the dishwasher from operating effectively.
Dishwasher tablets
Halve the tablet if it is difficult to close the dispenser
lid. There is a risk that the detergent will not be
released properly if the lid is tight and will not open
correctly.
NOTE!
Dishwasher tablets are not recommended for short
programs (less than 75 minutes). Use powder or
liquid dishwasher detergent instead.
3–in–1/All-in-one detergent
Read through the directions for these products
carefully. If anything is unclear, contact the detergent
manufacturer.
4
5
Press the main power switch
and close the door
Auto wash
The dishwasher can measure how dirty the dishes
are and adjust water consumption and temperature
accordingly. When newly installed, the program needs
to be run five times before it is fully adapted and can
provide the best results.
Heavy wash
Program for very dirty dishes, such as pans, casserole
dishes and oven dishes. If these dishes do not
completely fill the dishwasher, you can add plates
and the like.
Normal wash
Use to wash normally dirty dishes, and even dishes
with dried leftovers, such as plates, serving dishes,
cups, glasses and so on.
Eco wash
Use when you want to save water. For normally dirty
dishes.
Select the program
Press the Program selector one or more times
until the desired program symbol lights.
Quick wash
This program is used for glasses and porcelain that
is slightly dirty, such as coffee cups.
Rinse & Hold
Used to rinse dishes while you wait for the dishwasher
to become fully loaded.
14
4)
3)
2)
1)
1
2
0
Normal wash -
-
-
Normal wash
Eco wash
Quick wash
30
55
65
45
55
55-65
2
2
2
2
3
2-3
-
50
65
45
60
65
0:20
2:30
2:25
1:45
3:15
1:50-2:50
0,2
0,8
1,5
0,7
1,3
1,3-1,6
0:20
2:15
2:10
1:30
3:00
1:40-2:40
0,1
0,5
0,8
0,3
0,7
0,7-1,0
10
11
16
14
18
12-21
Rinse & Hold 0
1
0:06
0,01
0:06
0,01
3
Consumption values vary depending on the water supply temperature, the ambient temperature, the size of the load, the selected options and more.
Connection to cold water, approx. 20 °C.
Connection to hot water, approx. 60 °C.
The energy label performance figures are based on this program.
0
2
-
Heavy wash
1-3
-
4)
1)
OpPreMain wash Number Final
Consumption values
of rins- rinse tem2)
3)
tions washes (°C)
Cold water
Hot water
es
perature
Wash time
Energy
Wash time
Energy
Water con(°C)
(approx. hours:min- (approx. kWh) (approx. hours:min- (approx. kWh) sumption (liter)
utes)
utes)
Auto wash
Program
Dishwashing
Program chart
15
Dishwashing
6
Select options
To select an option, press one of the option
buttons. The field next to the button lights when
the option is activated. The available options depend
on the selected program. Once you have started the
program, the options you selected are saved for the
next time you use the same program. An exception
is the Delayed start option.
Temperature
The Temperature option button allows you to select
a higher or lower temperature for the main wash. If
you want to improve dishwashing efficiency, activate
the option for a higher temperature. This option
remains selected until changed.
You can vary the temperature as shown below:
Heavy wash: 55 °C/ 70 °C
Normal wash: 45 °C/ 65 °C
Quick wash:
30 °C/ 60 °C
Eco wash:
55 °C/ 60 °C
Delayed start
When you select Delayed start, the dishwasher will
start 1–24 hours after you press the Start/Stop button.
1. Press the button once to activate Delayed start.
Press the button several times – or hold it in – to
set the desired number of hours.
2. Press Start/Stop and the dishwasher counts down
1 hour at a time and starts after the selected delay.
Press and hold Start/Stop for five seconds if you want
to cancel the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start
the program.
7
Press Start/Stop
The display flashes three times with the
remaining time to indicate that the program has
started. Close the door properly otherwise the
dishwasher will not start. The display indicates
if the door is open.
NOTE!
Drying
Press the Drying option button for improved drying
results. The temperature increases during the final
rinse, which improves drying results but increases
program time and energy consumption. If you want a
program with Short dry, press it again and the field
next to the button turns off. This option can be used
with all programs except Auto wash.
If the machine does not start within 2 minutes of the
last button press, the display returns to showing the
last program run.
Stopping or changing a program
In order not to accidently press a button and cancel
the current program, you must press and hold
Start/Stop for five seconds if you want to change
programs after starting the dishwasher. Add more
detergent if the lid of the detergent dispenser has
opened. Then choose a new program and press
Start/Stop.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically.
Add the dishes, close the door and the dishwasher
continues the program.
16
Dishwashing
If the dishwasher is turned off using the
main power switch or due to a power
failure
If the dishwashing program was not finished, the
interrupted program continues when power is
restored.
NOTE!
During drying, the program is interrupted if the power
is cut or the door is open for more than 2 minutes.
8
After dishwashing
Once the program has finished, “End” appears
on the display.
A buzzer also sounds at the end of the program. See
the section Settings, which describes how to change
this function.
Once the dishwasher has finished, it uses only
standby power. Turn off the dishwasher using the
main power switch if you want to completely cut the
power. Turn off the water supply valve after each use.
Drying
For additional drying the door should be opened 35
mm upon completion of the drying cycle. For more
information refer to the page marked Technical
information in these instructions.
17
Settings
Settings menu overview:
Confirm selection and open next
menu.
START
STOP
Current menu.
PROG
Current selection.
Browse selections.
Do as follows to open the settings menu:
1. Turn off the dishwasher using the main power switch. Wait about five seconds.
2. Then press the main power switch again. Wait until the display turns on before the next step.
PROG
+
3. Within five seconds, press and hold the Program selector (wait for the audio signal confirming the
button press), then press the Drying button. Keep the buttons pressed until the symbols for the
Auto wash and Rinse & Hold programs start to flash.
You can now adjust the following settings:
Description
1: Child lock
(button lock)
0 (Off) or 1 (On)
You can activate the child lock (button lock) option to prevent children from starting the dishwasher.
Press the Temperature and Drying buttons simultaneously
to temporarily deactivate the button lock when you want to
start the dishwasher. The button lock is automatically reactivated after 2 minutes.
2: Buzzer volume
0 (Off), 1–4
The dishwasher uses a buzzer to indicate when a program
is finished or when a fault has occurred.
3: Operation volume
0 (Off), 1–4
This sound is used to confirm each button press.
4: LCD contrast
-1, 0, +1, +2, +3
For adjusting the contrast of the display.
5: Rinse aid
0 (Off), 1–6
Rinse aid dosage setting.
Finally, press Start/Stop to save and exit the menu.
18
Time remaining
Once you have selected a program and options, the
display indicates how long the program took the last
time it was used.Once you have started the
dishwasher, the display indicates how much program
time remains. The remaining time is updated after the
water for the final rinse has been heated.
This may differ somewhat from time to time depending
on the temperature of the water supply, the amount
of dishes, the ambient temperature and other factors.
While the program is running, the time counts down
and the remaining program time is shown on the
display. The remaining time is shown, for example,
as 1:15, which means the program will run for another
1 hour and 15 minutes.
NOTE!
During the first run of each program, the remaining
time displayed can be slightly misleading, as the
dishwasher is estimating the time. When you run the
program a second time, the dishwasher will calculate
the remaining time based on the previous duration
of the program.
19
Care and cleaning
The dishwasher tub is made of stainless steel and is
kept clean through normal use. However, if you have
hard water, limescale deposits may form in the
dishwasher. If this happens, run the Normal wash
program with high temperature and two tablespoons
of citric acid in the detergent compartment (with no
dishes in the machine).
1. Turn the handle anticlockwise once.
Spray arm
1x
Pipe
section
Fine filter
2. Lift the pipe section straight up by the handle. Free
the coarse filter to clean the pipe section.
3. Remove and clean the fine filter.
4. Replace in reverse order. Check that the edges
seal properly when replacing the fine filter.
Coarse filter
Coarse filter
The coarse filter traps larger food particles, which
cannot get past the drainage pump. Empty the coarse
filter as necessary.
1. Lift the coarse filter by the handle.
2. Empty the coarse filter. Remember to replace it!
5. Lock the filter in place by turning the handle
clockwise to the stop position. The handle should
point straight out from the dishwasher.
Fine filter
Debris that collects on the fine filter is automatically
rinsed away during each wash. However, the fine filter
and its pipe section should be cleaned a couple of
times a year.
20
1x
Care and cleaning
NOTE!
The dishwasher must not be used without the filter
in place!
Diswashing efficiency can be affected if the course
filter is incorrectly fitted. After cleaning ensure that
filter handle is fully locked with the handle pointing
out of the dishwasher.
Drainage pump
If the dishwasher still does not start and a whirring
sound is heard, the overflow protection has been
activated.
• Shut off the water.
• Remove the plug from the wall socket.
• Call the service division.
NOTE!
Do not forget to reinstall the fitted piece.
The pump can be accessed from inside the
dishwasher.
1. Cut the power to the dishwasher by pulling out the
plug from the wall socket!
2. Remove the coarse filter and pipe section.
3. Remove the small yellow fitted piece at the left of
the bottom drain (see illustration below).
Lower spray arm
Holes and bearings can sometimes become blocked.
1. Pull the lower spray arm straight up to release it.
2. Remove any debris using a needle or the like. The
spray arms also have holes underneath.
4. By inserting your finger into the hole you can turn
the pump blade to release anything blocking it.
5. Reinstall the fitted piece and filters.
6. Plug the machine in again.
21
Care and cleaning
Upper spray arm
The upper basket must be removed before the upper
spray arm can be released.
1. Pull out the upper basket and turn the basket catch
on each runner outwards (see illustration). The
basket can now be removed.
2. Loosen the upper spray arm in the same manner
as the lower spray arm and clean it.
Door
When cleaning the edge around the door, use only a
slightly damp cloth (with a little cleaner if necessary).
WARNING!
Do not use a spray bottle or the like around the door
lock. This is to ensure that water does not penetrate
the door catch and come into contact with the
electrical components.
22
Rinse aid
Select dosage
Drying is faster if you use rinse aid. When the rinse
aid needs topping up, the above symbol lights on the
display.
Top up with rinse aid
Top up with rinse aid as follows:
1. Open the rinse aid compartment lid.
The rinse aid dispenser can be adjusted between 0
(off) and 6.
Increase the rinse aid dosage:
• If the dishes have water marks.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the
rinse aid can be diluted 50:50 with water.
For water with a hardness greater than 10–12 °dH,
you ought to use rinse aid with citric acid (known as
acid rinse aid).
Set the dosage
2. Carefully top up with rinse aid. Only add rinse aid
to the level marked max.
The section Settings describes how to set the rinse
aid dosage.
3. Wipe up any splashes of rinse aid around the
compartment.
4. Close the lid firmly.
NOTE!
After topping up, it may take a while before the
symbol goes out.
23
Error messages
Display
Type of fault
Action
Overfilling
Call the service division.
Water outlet fault
See "Possible causes" in the chapter Troubleshooting.
Water inlet fault
Check that the water tap is on.
Check whether dishwasher inlet hose is
connected to a pressure limiting valve (some
pressure limiting valves may restrict the
supply of water to the dishwasher).
Inlet valve leakage
Turn off the water tap and call the service
division
Turn off the machine with the main power switch and then turn it on again to clear the error message from the
display.
24
Troubleshooting
Problem
Possible causes
Action
The dishes are not clean.
The spray arms do not rotate.
Remove the arms and clean them.
Check that the dishes are not blocking
the spray arms.
Old detergent. Detergent is a perishable product.
Avoid large packages.
Incorrect detergent dosage.
Dose according to water hardness. Far
too much or far too little detergent results in poorer dishwashing results.
Dishwashing program too weak.
Select a higher temperature or a more
powerful program.
Dishes loaded incorrectly.
Do not cover porcelain with large
bowls or the like. Avoid placing very
tall glasses in the corners of the baskets.
Glasses and cups have toppled over
during the program.
Place dishes to sit steady.
The filter is not correctly fitted.
Screw the filter firmly into place. See
the section Care and cleaning.
Incorrect rinse aid dosage setting.
See the sections Rinse aid and Settings.
Too high temperature and/or too much
detergent can cause etching on crystal. Unfortunately, this cannot be repaired, only prevented.
Wash crystal at a low temperature and
with a conservative amount of detergent. Contact the detergent manufacturer.
The dishes have a sticky white/blue
film.
Rinse aid dosage setting too high.
Reduce the amount. See the sections
Rinse aid and Settings. If you have
very soft water, you may want to dilute
the rinse aid 50:50 with water.
Spots on stainless steel or silver.
Some foodstuffs, such as mustard,
mayonnaise, lemon, vinegar, salt and
dressings, can cause spots on stainless steel if left for too long.
Rinse off these types of foodstuffs if
not starting the dishwasher immediately. Why not use the Rinse & Hold program.
Spots or films on the dishes.
All stainless steel can cause spots on Silver and stainless steel items should
silver if they come into contact during not come into contact during dishwashdishwashing. Aluminium can also
ing.
cause spots on dishes.
Spots left after washing.
Lipstick and tea can be difficult to wash Use a detergent with a bleaching
off.
agent.
Rattling sound when dishwashing.
The dishes are not correctly placed or Check that the dishes are placed sethe spray arms are not rotating.
curely. Spin the spray arms to make
sure they can rotate.
25
Troubleshooting
Problem
Possible causes
Action
The dishwasher does not start.
You have forgotten to turn on the main Press the main power switch.
power switch.
The door is not properly closed.
Check.
A fuse/circuit breaker has been
tripped.
Check.
The plug is not plugged into the wall
socket.
Check.
The water tap is turned off.
Check.
Overflow/leaks
Check.
A whirring sound (the drainage pump) Turn off the water tap. Pull out the plug
is heard from the dishwasher and does and call the service division.
not stop when the main power switch
is turned off.
Check that the Delayed start option
has not been selected.
Press and hold Start/Stop for five seconds if you want to cancel the Delayed
start option.
1 minute appears in the display.
The program is taking longer than esti- None, next time the program is run the
mated.
corrected time will be displayed.
Water remains in the dishwasher.
Blocked drainage hose.
Loosen the drainage hose where it
connects to the sink unit's water trap.
Check that no debris has fastened. Is
the cone-shaped part of the pipe cut
to an inner diameter of at least 14 mm?
Kink in drainage hose.
Check that the hose is free from kinks
and sharp bends.
The filters are blocked.
Clean the coarse and fine filters.
The filter is not locked in completely.
Ensure filter is completely locked with
handle pointing towards the door.
Debris in the drainage pump.
Clean the drainage pump. See the
section Care and cleaning.
Dirt around the seals and in corners.
Clean with washing-up brush and low
foaming cleaner.
Bad odour in dishwasher.
Low temperature programs have been Run a program with a higher temperaselected for a prolonged period.
ture about once a month.
The dishes are not dry enough.
Drying power too low.
Activate the Drying option.
The dishwasher is not fully loaded.
Fully load the dishwasher.
Rinse aid needs topping up or dosage Top up with rinse aid or increase the
is set too low.
rinse aid dosage. See the sections
Rinse aid and Settings.
Open the door a little once the program
has finished.
26
Troubleshooting
Problem
Possible causes
Action
Cannot close door.
The baskets are not correctly positioned.
Check that the baskets are correctly
positioned horizontally.
Check that the dishes are not blocking
the baskets from sliding properly into
place.
The touch buttons do not react when You have pressed the touch buttons
pressed.
too soon after opening the door.
Wait a moment then try again.
Dirt on the touch buttons.
Clean with a dry or slightly damp cloth.
Child lock (button lock) activated.
See the section Settings.
27
Technical information
Information for test institute
Energy labelling
Australian standard:
AS/NZS 2007
Number of place settings:
14
Dishwashing programs:
Normal wash, no options
The door should be opened upon completion of the drying cycle a distance
of 35 mm at V.
V
Program time:
1:45 hours:minutes
Connection:
Cold water 20 °C
Test method for noise measurement: IEC-704-3
Dosages during testing
Detergent:
In accordance with AS/NZS 2007
Prewash:
7,5 gram
Main wash:
25 gram
Rinse aid:
In accordance with AS/NZS 2007
Rinse aid dosage: 3
Loading the dishwasher
28
Technical information
2
2
5
5
5
5 1
2
5
1 1 1
5
5
5 1
1 1 1
5
5
5 5
5
5
3
2
2
2
2
3
3
3
2
3
2
2
3
2
4
1
1 1
1
1 1
3
3
3
2
3
4 4
3
2
4
4
4
4
4
4
4
4
4
4
3
1.
2.
3.
4.
5.
2
Teaspoons
Dessertspoons
Soupspoons
Forks
Knives
4
3
3
Technical data
Height:
817-875 mm
Width:
596 mm
Depth:
550 mm
Weight:
49 kg
Capacity:
14 place settings
Water pressure:
300 - 1000 kPa
1)
2)
2
0.3–10 kp/cm
2
3–100 N/cm
Electrical connection:
See type plate.
Rated power:
See type plate.
1) Weight can vary due to different specifications.
2) In accordance with standard, AS/NZS 2007.
29
Installation
[mm]
1189
550
596
49
700
670
136-186
824-875
717
519
30
30-94
Safety instructions
• Connections to electricity, water and drainage
must be performed by a qualified professional.
• Electrical, water and drainage installations must
be carried out by a qualified professional.
• Always follow applicable regulations for water,
drainage and electricity.
• An incorrect or flawed installation can result in
higher consumption of energy, water and
detergent, which can result in increased costs and
poor dishwashing results. In order to minimise
noise it is important that you follow the instructions.
• Exercise caution during installation! Use protective
gloves! Always have someone assist you!
• Place a watertight protective tray on the floor under
the dishwasher to prevent damage from any water
leaks.
• Before screwing the dishwasher into place, test
the dishwasher by running the Rinse & Hold
program. Check that the dishwasher fills with water
and drains. Check also that none of the
connections leak.
WARNING!
Turn off the water supply when installing the
dishwasher!
30
WARNING!
The plug must be disconnected or power to the
socket turned off while the work is carried out!
Installation
Suggested machine installations
The dishwasher can be installed built-in, completely
freestanding or partially built-in.
413
A. Built-in
The dishwasher is intended for installation under a
worktop. The recess dimensions are illustrated. Holes
for wires/cables need not be larger than 38 mm in
diameter. Make sure the edges of such holes are even
to prevent damage to the drainage and inlet hoses
and the power cable.
45
547
5
600
[mm]
WARNING!
A completely freestanding dishwasher must be fitted
with anti-tip brackets.
600
>550
C. Partially built-in
49
820*-878
136
If the dishwasher is installed so that either side is
visible, you can fit a side panel. These accessories
can be purchased where you bought the dishwasher.
Adjust the height and slide the
dishwasher into place
*Remove locking nuts and coasters for
an installed height of 820-824 mm.
1. Attach the coasters (if applicable) to the
dishwasher.
B. Freestanding
A freestanding dishwasher must be fitted with anti-tip
brackets. This comprises two brackets, which are
screwed into place as illustrated.
Next, slide the dishwasher into place so that the
brackets grip the rear feet. Now the dishwasher will
not tip over if a load is placed on the door when open.
If the dishwasher is installed completely freestanding,
side panels and a worktop should be fitted. These
accessories can be purchased where you bought the
dishwasher.
2. Start by measuring the height from the floor to the
bottom edge of the worktop.
3. Measure the height from the floor to the top edge
of the dishwasher.
4. Adjust all feet by turning them clockwise to raise
or anticlockwise to lower the dishwasher.
5. Check that there is an air gap of at least 3 mm
between the underside of the worktop and the top
edge of the dishwasher.
6. Tighten the lock nuts (lock nut) on the rear feet.
7. Slide the dishwasher into place.
• Pull through the drainage and supply hoses
when the machine is slid into place.
31
Installation
• Check that the hoses have no kinks or sharp
bends, and check that there is nothing that can
damage the hoses.
The hose must always discharge at least 350 mm
above the bottom of the machine.
Ensure that the drainage hose has no kinks.
NOTE!
The hose must be attached at the same height as
the underside of the sink.
Max. 950 mm
Min. 350 mm
Min. 14 mm
Figure 1
8. Make any final adjustments to the front feet (the
dishwasher may lean no more than 5 mm) and
tighten the lock nuts.
If you want to install your dishwasher freestanding,
skip steps 2, 3 and 5 above.
Max. 3 m
Drainage connection
When the drainage hose is routed to a connection
nipple on the sink unit's water trap (see illustration 1),
please note that the hose must be attached at the
same height as the underside of the sink unit,
otherwise dishwater from the sink may flow back into
the dishwasher. The drainage hose is threaded onto
the cone-shaped connection pipe on the sink unit's
water trap. The cone-shaped pipe must be cut to an
internal diameter of at least 14 mm. For other
connection alternatives, see illustrations 2 and 3.
The drainage hose may be extended by a maximum
of 3 m (the total length of the drainage hose must not
exceed 4,5 m). Any joins and connecting pipes must
have an internal diameter of at least 14 mm. However,
the drainage hose should ideally be replaced with a
new hose without joins.
No part of the drainage hose may be more than 950
mm above the bottom of the dishwasher. The hose
must not be routed directly to a floor drain or the like.
In such cases, the hose can act as a siphon and
empty the dishwasher.
32
Max. 950 mm
Min. 350 mm
Figure 2
Max. 950 mm
Min. 350 mm
Figure 3
Connection to water supply
Use only the supply hose provided with the
dishwasher. Do not re-use old hoses or other spare
supply hoses.
Installation
The supply pipe must be fitted with a stopcock. The
stopcock must be easily accessible, so that the water
can be shut off if the dishwasher has to be moved.
Once the installation is complete, the stopcock should
be opened to allow the pressure to settle for a while
and to check that all connections are tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal
power to heat your home. Choosing a hot water
connection cuts program times and reduces the
dishwasher's electricity consumption.
NOTE!
Connecting a dishwasher to the water supply via
certain types of pressure limiting valves may restrict
the water supply!
Adjusting the plinth (only when
using toe kick accessory)
The dishwasher is supplied with one or two toe kicks
depending on the model. The table shows which toe
kick you should use depending on the recess height
and plinth depth. Attach the enclosed soundproofing
material to the toe kick (certain models).
Recess
30
height
(mm)
Plinth depth (mm)
40
50
60
70
80 90 100
820
N/A N/A N/A N/A N/A L
L
L
830
N/A N/A N/A N/A L
L
L
L
840
L
L
L
L
850
N/A N/A N/A N/A N/A H
H
H
860
N/A N/A N/A N/A H
H
H
H
870
H
H
H
H
L
H
L
H
L
H
L
H
This may cause F:12 error code/ Water inlet fault to
be displayed.
L
Low toe kick (height=90 mm), article number 80
735 66
Electrical connection
H
Information about the electrical connection can be
found on the serial number plate This specification
must match the electricity supply.
High toe kick (height=120 mm), article number 80
735 67
N/A Not recommended for aesthetic reasons.
Dishwashers fitted with a plug must be connected to
an earthed socket.
The electric wall socket must be placed outside of the
installation area to be easily accessible after installing
the dishwasher. Do not use an extension cord!
NOTE!
Repairs and maintenance must be carried out by a
qualified professional.
Recess height
Plinth depth
33
Installation
Set the correct plinth depth as
follows
Screwing the dishwasher into place
1. Attach the supplied soundproofing material to the
back of the toe kick (certain models only). If you
use the low toe kick, adjust the height of the
soundproofing by removing the thinner part of the
strip.
After fastening the machine, check that the front feet
still touch the floor.
Adjust soundproofing material height
2. Squeeze together the grey catches and pull out
the holders to the desired depth. Push in the
catches to lock the holders into place.
3. Hang the toe kick on the holders by inserting it into
the notches.
34
(Applicable only to built-in dishwashers.)
Service
Read the chapter Troubleshooting before contacting
the service division. Make a note of the information
on the serial number plate on the right inside the
dishwasher. Note the type number (1) and the serial
number (2).
1
TYPE
SERIAL NO
2
35
Quick guide
1
Load the baskets
Do not rinse dishes under running water before
loading them in the dishwasher. Simply scrape
off large food particles before loading the
dishwasher.
2
3
Add detergent
The detergent compartment has one smaller
compartment for the prewash and one for the
main wash.
Check that the spray arms can
rotate freely
Art. No.: 8090769. Rev. 02. We reserve the right to make changes.
36
4
5
6
Press the main power switch
and close the door
Select a program and any
options
Press Start/Stop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement