advertisement
Cover
Camera User Guide
ENGLISH
•
Make sure you read this guide, including the “Safety
8 ) section, before using the camera.
•
Reading this guide will help you learn to use the camera properly.
•
Store this guide safely so that you can use it in the future.
•
Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
•
To jump to the beginning of a chapter, click the chapter title at right.
From chapter title pages, you can access topics by clicking their titles.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
©CANON INC. 2013 CDD-E554-010 1
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-6LH
Battery Charger
CB-2LY/CB-2LYE
Wrist Strap Getting Started
•
A memory card is not included (
).
Compatible Memory Cards
Warranty Card
The following memory cards (sold separately) can be used, regardless of capacity.
•
SD memory cards*
•
SDHC memory cards*
•
SDXC memory cards*
*
Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera.
Preliminary Notes and Legal
Information
•
Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or to be recorded in a way that is machine readable.
•
Images recorded by the camera are intended for personal use. Refrain from unauthorized recording that infringes on copyright law, and note that even for personal use, photography may contravene copyright or other legal rights at some performances or exhibitions, or in some commercial settings.
•
The camera warranty is valid only in the area of purchase. In case of camera problems while abroad, return to the area of purchase before contacting a Canon Customer Support Help Desk.
•
Although the LCD monitor is produced under extremely high-precision manufacturing conditions and more than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots. This does not indicate camera damage or affect recorded images.
•
The LCD monitor may be covered with a thin plastic film for protection against scratches during shipment. If covered, remove the film before using the camera.
•
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2
Part Names and Conventions in This
Guide
Zoom lever
Shooting: < i (telephoto)> /
< j (wide angle)>
Playback: < k (magnify)> /
< g (index)>
Microphone
Lens
Mode dial
Shutter button
Lamp
Power button
Wi-Fi antenna area
Flash
< h (Flash up)> switch
Control ring
Tripod socket
Memory card/battery cover
DC coupler terminal cover
Strap mount
Screen (LCD monitor)
Indicator
< (AF frame selector)> /
< a (Single-image erase)> button
Movie button
Speaker
AV OUT (Audio/video output) /
DIGITAL terminal
HDMI TM terminal
< n> button
<
1 (Playback)> button
< b (Exposure compensation)> /
< (Wi-Fi)> / Up button
< e (Macro)> / <f (Manual focus)> / Left button
Control dial
FUNC./SET button
< h (Flash)> / Right button
< l (Display)> / Down button
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
•
In this guide, icons are used to represent the corresponding camera buttons and dials on which they appear or which they resemble.
•
The following camera buttons and controls are represented by icons.
< y> Control ring on front
< o> Up button on back
< q> Left button on back
< r> Right button on back
< p> Down button on back
<
7> Control dial on back
•
Shooting modes and on-screen icons and text are indicated in brackets.
•
: Important information you should know
•
: Notes and tips for expert camera use
•
=xx
: Pages with related information (in this example, “xx” represents a page number)
•
Instructions in this guide apply to the camera under default settings.
•
For convenience, all supported memory cards are simply referred to as the “memory card”.
•
The tabs shown above titles indicate whether the function is used for still images, movies, or both.
Still Images
Movies
: Indicates that the function is used when shooting or viewing still images.
: Indicates that the function is used when shooting or viewing movies.
z z choose setting items, switch images, and perform other operations. Most of these operations are also possible with the
< o><p><q><r> buttons.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4
Table of Contents
Package Contents .........................
Compatible Memory Cards ............
Information .....................................
This Guide......................................
Table of Contents ...........................
Common Camera Operations ........
Safety Precautions .........................
Basic Guide ....................
Initial Preparations .......................
Trying the Camera Out ................
1
Camera Basics .....................
On/Off ..........................................
Shutter Button ..............................
Shooting Modes ...........................
Shooting Display Options ............
Using the FUNC. Menu ................
Using Menus ................................
On-Screen Keyboard ...................
Indicator Display ..........................
Clock ............................................
2
Auto Mode ............................
Shooting with Camera-Determined
Settings ........................................
Common, Convenient Features ...
Using Face ID ..............................
Image Customization Features ....
Helpful Shooting Features ...........
Customizing Camera Operation ..
3
Brightness / Color Customization
(Live View Control) .......................
Specific Scenes ...........................
Image Effects (Creative Filters) ...
Purposes ......................................
4
P Mode ..................................
([P] Mode) ....................................
Image Brightness (Exposure) ......
Color and Continuous Shooting ...
Shooting Range and Focusing ....
Flash ............................................
Other Settings ..............................
5
Tv, Av, and M Mode ..............
([Tv] Mode)...................................
([Av] Mode) ..................................
Aperture Values ([M] Mode) .........
Styles ...........................................
6
Playback Mode ....................
Viewing ........................................
Browsing and Filtering Images ....
Editing Face ID Information .........
Image Viewing Options ................
Protecting Images ........................
Erasing Images ............................
Rotating Images ...........................
Tagging Images as Favorites .....
Editing Still Images ....................
Editing Movies............................
7
Wi-Fi Functions .................
What You Can Do with Wi-Fi .....
Preparing to Share Images via Wi-Fi .....................................
Registering Web Services ..........
Smartphone ...............................
Computer ...................................
Accessing the Wi-Fi Menu .........
Point ...........................................
Point ...........................................
Camera ......................................
Sending Images .........................
Saving Images to a Computer ...
(Image Sync)..............................
Geotagging Images on the Camera ................................
Settings ......................................
8
Setting Menu ......................
Functions ...................................
9
Accessories .......................
System Map ...............................
Optional Accessories .................
Using Optional Accessories .......
Using the Software ....................
Printing Images ..........................
Appendix ............................
Troubleshooting .........................
On-Screen Messages ................
On-Screen Information ..............
Functions and Menu Tables .......
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
5
Handling Precautions .................
Specifications .............................
Index ..........................................
Precautions ................................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
6
Common Camera Operations
4 Shoot z z
Shooting people well
I
Portraits
)
P
Against Snow
(
Smooth Skin
(
Applying special effects
Vivid Colors
)
Miniature Effect
)
Poster Effect
(
Toy Camera Effect
(
Fish-Eye Effect
(
Soft Focus
(
z z
z z
z z
z z
z z
z z
1 View z z
z z
z z
z z
z z
z z
E Shoot/View Movies z z
z z
c Print z z
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Monochrome
)
7
Save
z z
Use Wi-Fi Functions
z z
z z
z z
Safety Precautions
•
Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly.
•
The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment.
•
Be sure to also check the guides included with any separately sold accessories you use.
Warning
Denotes the possibility of serious injury or death.
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight.
In particular, remain at least 1 meter (39 inches) away from infants when using the flash.
•
Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Date/time battery (if removable): Dangerous if swallowed. If this occurs, contact a doctor immediately.
•
Use only recommended power sources.
•
Do not attempt to disassemble, alter or apply heat to the product.
•
Avoid dropping or subjecting the product to severe impacts.
•
To avoid the risk of injury, do not touch the interior of the product if it has been dropped or otherwise damaged.
•
Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves abnormally.
•
Do not use organic solvents such as alcohol, benzine, or thinner to clean the product.
•
Do not let the product come into contact with water (e.g. sea water) or other liquids.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
8
•
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn the camera off and remove the battery pack/batteries.
If the battery charger (for cameras that use one) becomes wet, unplug it from the outlet and consult your camera retailer or a Canon Customer
Support Help Desk.
• Do not look through the viewfinder (if your model has one) at bright light sources, such as the sun on a clear day.
This could damage your eyesight.
•
Use only the recommended battery pack/batteries.
• Do not place the battery pack/batteries near or in direct flame.
•
If your camera uses a battery charger, note the following precautions.
- Unplug the power cord periodically, and using a dry cloth, wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area.
- Do not handle the power cord with wet hands.
- Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
- Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.
The battery pack/batteries may explode or leak, resulting in electrical shock or fire. This could cause injury and damage the surroundings. In the event that a battery pack leaks and the battery electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
•
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities.
Cover
Caution
Denotes the possibility of injury.
•
When holding the camera by the strap, be careful not to bang it, subject it to strong impacts or shocks, or let it get caught on other objects.
•
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
•
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
•
Avoid using, placing or storing the product in the following places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery pack/batteries, resulting in electrical shock, fire, burns or other injuries.
High temperatures may deform the product.
•
The slideshow transition effects may cause discomfort when viewed for prolonged periods.
• When using optional lenses, lens filters, or filter adapters (if applicable), be sure to attach these accessories firmly.
If the lens becomes loose and falls off, it may crack, and the shards of glass may lead to cuts.
• On cameras that raise and lower the flash automatically, make sure your finger is out of the way when the flash is lowered, to avoid pinching it.
This could result in injury.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
9
Caution
Denotes the possibility of damage to the equipment.
•
Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
•
When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera.
• On cameras that raise and lower the flash automatically, do not push the flash down or pry it open.
This may cause the product to malfunction.
•
In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.
•
Remove and store the battery pack/batteries when you are not using the camera.
If the battery pack or batteries are left inside the camera, damage caused by leakage may occur.
•
Before you discard the battery pack/batteries, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
•
If your camera is used with a battery charger, keep the charger unplugged when not in use. When charging the battery pack, do not leave it covered with a cloth or put other objects on it.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
•
Do not leave the battery pack near pets.
Pets biting the battery pack could cause leakage, overheating or explosion, resulting in fire or damage.
•
If your camera uses multiple batteries, do not use batteries that have different levels of charge together, do not use old and new batteries together, and do not insert the batteries with the + and – terminals reversed.
This may cause the product to malfunction.
•
Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
•
When putting the camera in your bag, ensure that hard objects do not come into contact with the screen. Also close the screen (so that it faces the camera body), if your camera has a screen that closes.
•
Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
10
Basic Guide
Basic information and instructions, from initial preparations to shooting and playback
Initial Preparations ...........................................
Attaching the Strap ................................................
Holding the Camera ..............................................
Charging the Battery Pack ....................................
Inserting the Battery Pack and Memory Card .......
Setting the Date and Time .....................................
Display Language .................................................
Trying the Camera Out .....................................
Shooting (Smart Auto) ...........................................
Viewing ..................................................................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
11
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
z z strap hole ( ), and then pull the other end of the strap through the loop on the threaded end ( ).
z z side of the camera.
Holding the Camera
z z z z your body and hold the camera securely to prevent it from moving. If you have raised the flash, do not rest your fingers on it.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to charge the battery pack initially, because the camera is not sold with the battery pack charged.
1
Insert the battery pack.
z z
marks on the battery pack and charger, insert the battery pack by pushing it in ( ) and down ( ).
CB-2LY
CB-2LYE
2
Charge the battery pack.
z z the charger into a power outlet ( ).
z z charger, then plug the other end into a power outlet.
z z charging begins.
z z green.
3
Remove the battery pack.
z z remove the battery pack by pushing it in
( ) and up ( ).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
12
•
To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see “Number of Shots/Recording
•
Charged battery packs gradually lose their charge, even when they are not used. Charge the battery pack on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera
(
).
1
Check the card’s write-protect tab.
z z cards with a write-protect tab when the tab is in the locked (downward) position.
Slide the tab up until it clicks into the unlocked position.
Terminals Battery
Lock
Cover
2
Open the cover.
z z
Before Use
Common Camera
Operations
Basic Guide
3
Insert the battery pack.
z z direction of the arrow, insert the battery pack as shown and push it in until it clicks into the locked position.
z z wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted.
4
Insert the memory card.
z z until it clicks into the locked position.
z z right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Terminals
13
5
Close the cover.
z z you slide it, until it clicks into the closed position ( ).
•
For guidelines on how many shots or hours of recording can be saved on one
memory card, see “Number of 4:3 Shots per Memory Card” (
Removing the Battery Pack and Memory Card
Remove the battery pack.
z z lock in the direction of the arrow.
z z
Remove the memory card.
z z and then slowly release it.
z z
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (
).
1
Turn the camera on.
z z z z
2
Set the date and time.
z z q><r> buttons to choose an option.
z z o><p> buttons or turn the
<
7> dial to specify the date and time.
z z m> button.
3
Set the home time zone.
z z q><r> buttons or turn the
<
7> dial to choose your home time zone.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
14
4
Finish the setup process.
z z m> button when finished.
After a confirmation message, the setting screen is no longer displayed.
z z button.
•
Unless you set the date, time, and home time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information.
•
To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then choose [ ] by pressing the < o><p> buttons or turning the <7> dial.
Cover
Changing the Date and Time
Adjust the date and time as follows.
1
Access the camera menu.
z z n> button.
Before Use
Common Camera
Operations
Basic Guide
2
Choose [Date/Time].
z z 3] tab.
z z o><p> buttons or turn the
<
7> dial to choose [Date/Time], and then press the < m> button.
3
Change the date and time.
z z
) to adjust the settings.
z z n> button to close the menu.
•
Date/time settings can be retained for about 3 weeks by the camera’s built-in date/time battery (backup battery) after the battery pack is removed.
•
The date/time battery will be charged in about 4 hours once you insert a charged battery pack or connect the camera to an AC adapter kit (sold
), even if the camera is left off.
•
Once the date/time battery is depleted, the [Date/Time] screen will be displayed when you turn the camera on. Set the correct date and time as
described in “Setting the Date and Time” (
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
15
Display Language
Change the display language as needed.
1
Enter Playback mode.
z z 1> button.
2
Access the setting screen.
z z m> button, and then immediately press the < n> button.
3
Set the display language.
z z o><p><q><r> buttons or turn the <
7> dial to choose a language, and then press the < m> button.
z z the setting screen is no longer displayed.
Trying the Camera Out
Still Images Movies
Follow these instructions to turn the camera on, shoot still images or movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
z z z z
2
Enter [ ] mode.
z z z z
].
camera will make a slight clicking noise as it determines the scene.
z z stabilization mode are displayed in the upper right of the screen.
z z subjects indicate that they are in focus.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
The current time is displayed if you wait too long in step 2 after pressing the
< m> button before you press the <n> button. In this case, press the
< m> button to dismiss the time display and repeat step 2.
•
You can also change the display language by pressing the < n> button and choosing [Language ] on the [
3] tab.
16
3
Compose the shot.
z z the zoom lever toward < i> (telephoto), and to zoom away from the subject, move it toward < j> (wide angle).
4
Shoot.
Shooting Still Images
Focus.
z z down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
z z move the < h> switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera.
Elapsed Time
Shoot.
z z down.
z z is played, and in low-light conditions when you have raised the flash, it fires automatically.
z z sound ends.
z z revert to the shooting screen.
Shooting Movies
Start shooting.
z z beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
z z bottom edges of the screen indicate image areas not recorded.
z z faces indicate that they are in focus.
z z off the movie button.
Finish shooting.
z z shooting. The camera beeps twice as recording stops.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
17
Viewing
After shooting images or movies, you can view them on the screen as follows.
1
Enter Playback mode.
z z 1> button.
z z
2
Browse through your images.
z z the < q> button or turn the <7> dial counterclockwise. To view the next image, press the < r> button or turn the
<
7> dial clockwise.
z z q><r> buttons to browse through images quickly.
z z
<
7> dial rapidly. In this mode, turn the
<
7> dial to browse through images.
z z the < m> button.
z z play movies, go to step 3.
Cover
] icon. To
Before Use
Common Camera
Operations
Basic Guide
3
Play movies.
z z m> button, choose [ ]
(either press the < o><p> buttons or turn the <
7> dial), and then press the
< m> button again.
z z z is finished, [
] is displayed.
To adjust the volume, press the < o><p> buttons.
•
To switch to Shooting mode from Playback mode, press the shutter button halfway.
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
18
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered.
1
Choose an image to erase.
z z q><r> buttons or turn the
<
7> dial to choose an image.
2
Erase the image.
z z a> button.
z z
< q><r> buttons or turn the <7> dial to choose [Erase], and then press the < m> button.
z z z z q><r> buttons or turn the <
7> dial to choose
[Cancel], and then press the < m> button.
•
You can also erase all images at once (
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
19
Advanced Guide
1
Camera Basics
Practical guide that introduces other camera basics and describes shooting and playback options
On/Off ................................................................
Power-Saving Features (Auto Power Down) ........
Shutter Button ..................................................
Shooting Modes ...............................................
Shooting Display Options ...............................
Using the FUNC. Menu ....................................
Using Menus .....................................................
On-Screen Keyboard .......................................
Indicator Display ..............................................
Clock .................................................................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
20
On/Off
Shooting Mode
z z camera on and prepare for shooting.
z z button again.
Playback Mode
z z 1> button to turn the camera on and view your shots.
z z 1> button again.
•
To switch to Playback mode from Shooting mode, press the <
1> button.
•
To switch to Shooting mode from Playback mode, press the shutter button
•
The lens will be retracted after about one minute once the camera is in
Playback mode. You can turn the camera off when the lens is retracted by pressing the <
1> button.
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates the screen (Display Off) and then turns itself off after a specific period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself off. To activate the screen and prepare for shooting when the screen is off
but the lens is still out, press the shutter button halfway (
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of inactivity.
•
You can deactivate Auto Power Down and adjust the timing of Display Off, if
•
Power saving is not active while the camera is connected to a computer
(
), or when connected to other devices via Wi-Fi (
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
21
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter button halfway down, and once the subject is in focus, press the button all the way down to shoot.
In this manual, shutter button operations are described as pressing the button halfway or all the way down.
1
Press halfway. (Press lightly to focus.)
z z camera beeps twice, and AF frames are displayed around image areas in focus.
2
Press all the way down. (From the halfway position, press fully to shoot.)
z z is played.
z z sound ends.
•
Images may be out of focus if you shoot without initially pressing the shutter button halfway.
•
Length of shutter sound playback varies depending on the time required for the shot. It may take longer in some shooting scenes, and images will be blurry if you move the camera (or the subject moves) before the shutter sound ends.
Shooting Modes
Use the mode dial to access each shooting mode.
Live View Control Mode
Customize image brightness or colors when shooting (
P, Tv, Av, and M Modes
Take a variety of shots using your preferred settings
,
).
Auto Mode
Fully automatic shooting, with camera-determined settings
,
Scene Mode
Shoot with optimal settings for specific scenes
).
Creative Filters Mode
Add a variety of effects to images when shooting (
).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
22
Shooting Display Options
Press the < p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Information is displayed No information is displayed
•
Screen brightness is automatically increased by the night display function when you are shooting under low light, making it easier to check how shots are composed. However, on-screen image brightness may not match the brightness of your shots. Note that any on-screen image distortion or jerky subject motion will not affect recorded images.
•
For playback display options, see “Switching Display Modes” (
Using the FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(
) or playback mode (
).
1
Access the FUNC. menu.
z z m> button.
Options
Menu Items
Cover
Before Use
Common Camera
Operations
Basic Guide
2
Choose a menu item.
z z o><p> buttons or turn the
<
7> dial to choose a menu item, and then press the < m> or <r> button.
z z can be specified simply by pressing the
< m> or <r> button, or another screen is displayed for configuring the function.
3
Choose an option.
z z o><p> buttons or turn the
<
7> dial to choose an option.
z z
< q> button.
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
23
4
Finish the setup process.
z z m> button.
z z
< m> button in step 1 is displayed again, showing the option you configured.
•
To undo any accidental setting changes, you can restore the camera’s default settings (
•
You can adjust settings directly in step 2 by turning the < y> ring, so you can configure one setting after another this way once you press the < o><p> buttons or turn the <
7> dial to choose various menu items.
Using Menus
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [
4], playback [
1], and so on. Note that available menu items vary depending on the selected shooting or playback mode (
).
1
Access the menu.
z z n> button.
2
Choose a tab.
z z z z o><p> buttons to choose a tab initially, you can switch between tabs by pressing the
< q><r> buttons.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
24
3
Choose a menu item.
z z o><p> buttons or turn the z
<
7> dial to choose a menu item.
For menu items with options not shown, first press the < m> or <r> button to switch screens, and then either press the
< o><p> buttons or turn the <7> dial to select the menu item.
z z the < n> button.
4
Choose an option.
z z q><r> buttons to choose an option.
5
Finish the setup process.
z z n> button to return to the screen displayed before you pressed the
< n> button in step 1.
•
To undo any accidental setting changes, you can restore the camera’s default settings (
Number of Available
Characters
Entering Characters
z z o><p><q><r> buttons or turn the <
7> dial to choose a character, and then press the < m> button to enter it.
Moving the Cursor
z z y> ring or choose [ ] or [ ] and press the < m> button.
Deleting Characters
z z press the < a> button or choose [ ] and press the < m> button.
Confirming Input and Returning to the Previous Screen
z z n> button.
Cover
On-Screen Keyboard
The keyboard is displayed when you must enter information, such as people’s names for Face ID or a camera nickname for Wi-Fi connections.
Note that the length and type of information you can enter varies depending on the function you are using.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
25
Indicator Display
The indicator on the back of the camera (
) lights up or blinks depending on the camera status.
Color
Indicator
Status
Camera Status
Green
On
Blinking
Connected to a computer (
), or display off
(
,
)
Starting up, recording/reading/transmitting images, shooting long exposures (
), or connecting/ transmitting via Wi-Fi
•
When the indicator blinks green, never turn the camera off, open the memory card/battery cover, or shake or jolt the camera, which may corrupt images or damage the camera or memory card.
Cover
Clock
You can check the current time.
z z m> button.
z z z z using the clock function, it will switch to vertical display. Press the < q><r> buttons or turn the <
7> dial to change the display color.
z z m> button again to cancel the clock display.
•
When the camera is off, press and hold the < m> button, then press the power button to display the clock.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
26
2
Auto Mode
Convenient mode for easy shots with greater control over shooting
Shooting with Camera-Determined
Settings ............................................................
Shooting (Smart Auto) ...........................................
Scene Icons ..........................................................
Image Stabilization Icons ......................................
On-Screen Frames ................................................
Common, Convenient Features ......................
Zooming In Closer on Subjects (Digital Zoom) .....
Shooting at Preset Focal Lengths (Step Zoom) ....
Using the Self-Timer..............................................
Adding a Date Stamp ............................................
Using Face ID ...................................................
Registering Face ID Information ...........................
Shooting ................................................................
Checking and Editing Registered Information .......
Image Customization Features .......................
Changing the Aspect Ratio ....................................
Changing Image Resolution (Size) .......................
Red-Eye Correction ...............................................
Changing Movie Image Quality .............................
Helpful Shooting Features ..............................
Displaying Grid Lines ............................................
Magnifying the Area in Focus ................................
Checking for Closed Eyes .....................................
Customizing Camera Operation .....................
Deactivating the AF-Assist Beam ..........................
Deactivating the Red-Eye Reduction Lamp ..........
Changing the Image Display Style after Shots ......
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
27
Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
Movies Still Images
Shooting (Smart Auto)
1
Turn the camera on.
z z z z
2
Enter [ ] mode.
z z z z
].
camera will make a slight clicking noise as it determines the scene.
z z stabilization mode are displayed in the upper right of the screen (
,
).
z z subjects indicate that they are in focus.
Zoom Bar
Focus Range (approx.)
Cover
3
Compose the shot.
z z the zoom lever toward < i> (telephoto), and to zoom away from the subject, move it toward < j> (wide angle). (A zoom bar showing the zoom position is displayed.)
4
Shoot.
Shooting Still Images
Focus.
z z camera beeps twice after focusing, and
AF frames are displayed to indicate image areas in focus.
z z multiple areas are in focus.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
z z move the < h> switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera.
28
Elapsed Time
Shoot.
z z down.
z z is played, and in low-light conditions when you have raised the flash, it fires automatically.
z z sound ends.
z z revert to the shooting screen.
Shooting Movies
Start shooting.
z z beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
z z bottom edges of the screen indicate image areas not recorded.
z z faces indicate that they are in focus.
z z off the movie button.
Resize the subject and recompose the shot as needed.
z z
note that the sound of camera operations will be recorded, and movies shot at zoom factors shown in blue will look grainy.
z z focus, brightness, and colors will be automatically adjusted.
Finish shooting.
z z shooting. The camera beeps twice as recording stops.
z z the memory card becomes full.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
29
Still Images/Movies
•
If the camera is turned on while the < p> button is held down, the camera will no longer sound. To activate sounds again, press the
< n> button and choose [Mute] on the [3] tab, and then press the < q><r> buttons to choose [Off].
Still Images
•
A blinking [ ] icon warns that images are more likely to be blurred by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still.
•
If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Flash Range” ( =
•
The subject may be too close if the camera only beeps once when you press the shutter button halfway. For details on the focusing
range (shooting range), see “Shooting Range” (
•
To reduce red-eye and to assist in focusing, the lamp may be activated when shooting in low-light conditions.
•
A blinking [ h] icon displayed when you attempt to shoot indicates that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press the shutter button all the way down and wait, or release it and press it again.
•
Although you can shoot again before the shooting screen is displayed, your previous shot may determine the focus, brightness, and colors used.
•
You can change how long images are displayed after shots (
).
Movies
Microphone
•
Keep your fingers away from the microphone while shooting movies.
Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled.
•
Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded.
•
Audio is recorded in stereo.
•
Distorted audio caused by recording when the wind is strong can be reduced.
However, the recording may sound unnatural when this option is used when there is no wind. When the wind is not strong, press the < n> button, choose [Wind Filter] on the [
4] tab, and then choose [Off] (
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
30
Still Images Movies
Scene Icons
In [ ] mode, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color.
Background
Normal Backlit Dark* Sunsets Spotlights
Subject
People
–
– – –
In Motion
Shadows on Face
–
Babies
–
–
–
–
–
–
Other Subjects
In Motion
– – –
At Close Range
– –
* Tripod Used
The background color of icons is light blue when the background is a blue sky, dark blue when the background is dark, and gray for all other backgrounds.
The background color of icons is light blue when the background is a blue sky, and gray for all other backgrounds.
Cover
•
The background color of [ ], [ ], [ ], [ ], and [ ] is dark blue, and the background color of [ ] is orange.
•
When shooting movies, only People, Other Subjects, and At Close Range icons will be displayed.
•
When shooting with the self-timer, People (In Motion), Other Subjects (In Motion) icons will not be displayed.
•
The Babies icon is displayed when [Face ID] is set to [On] and the face of a registered baby (younger than two years old) is detected (
). Confirm beforehand that the
date and time are correct (
•
Try shooting in [
) if the scene icon does not match actual shooting conditions, or if it is not possible to shoot with your expected effect, color, or brightness.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
31
Still Images Movies
Image Stabilization Icons
[
Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in
] mode.
Image stabilization for still images
Image stabilization for still images when panning*
Image stabilization for macro shots (Hybrid IS)
Image stabilization for movies, reducing strong camera shake, as when shooting while walking
(Dynamic IS)
Image stabilization for slow camera shake, such as when shooting movies at telephoto
(Powered IS)
No image stabilization, because the camera is mounted on a tripod or held still by other means
* Displayed when you pan, following moving subjects with the camera. When you follow subjects moving horizontally, image stabilization only counteracts vertical camera shake, and horizontal stabilization stops. Similarly, when you follow subjects moving vertically, image stabilization only counteracts horizontal camera shake.
•
To cancel image stabilization, set [IS Mode] to [Off] (
IS icon is not displayed.
Still Images Movies
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are aiming the camera at.
•
A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame will remain on the screen.
•
When you are pressing the shutter button halfway and the camera detects subject movement, a blue frame is displayed, and the focus and image brightness are constantly adjusted (Servo AF).
•
Try shooting in [
) if no frames are displayed, if frames are not displayed around desired subjects, or if frames are displayed on the background or similar areas.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
32
Common, Convenient Features
Still Images Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 20x enlargement.
Zoom Factor
1
Move the zoom lever toward
<
i>. z z z z factor at which images are still sharp, and the value is displayed.
2
Move the zoom lever toward
<
i> again. z z subject, using digital zoom.
Cover
•
Moving the zoom lever will display the zoom bar (which indicates the zoom position). The color of the zoom bar will change depending on the zoom range.
- White range: optical zoom range where the image will not appear grainy.
- Yellow range: digital zoom range where the image is not noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
43 ), the maximum zoom factor can be achieved by
following step 1.
•
Focal length when optical and digital zoom are combined is as follows (35mm film equivalent).
24 – 480 mm (24 – 120 mm with optical zoom alone)
•
To deactivate digital zoom, press the < n> button, choose [Digital Zoom] on the [
4] tab, and then choose [Off].
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
33
Still Images Movies
Shooting at Preset Focal Lengths (Step Zoom)
You can shoot at preset focal lengths of 24, 28, 35, 50, 85, 100 or 120 mm
(35mm film equivalent). This is convenient when you want to shoot at the angle of view of those focal lengths.
z z mm, turn the < y> ring counterclockwise until it clicks. Keep turning the < y> ring to increase the focal length, which changes to 35, 50, 85, 100, and 120 mm at each click.
•
Step zoom is not available when shooting movies, so turning the
< y> ring has no effect.
•
When you are using digital zoom (
), you cannot adjust the zoom factor by turning the < y> ring counterclockwise. However, you can set the focal length to 120 mm by turning it clockwise.
Still Images Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button.
1
Configure the setting.
z z m> button, choose [ ] in the menu, and then choose the [
]] option (
).
z z ]] is displayed.
2
Shoot.
z z halfway to focus on the subject, and then press it all the way down.
z z z z will blink and the camera will play a selftimer sound.
z z and sound will speed up. (The lamp will remain lit in case the flash fires.) z z triggered the self-timer, press the z
< n> button.
To restore the original setting, choose
[ ] in step 1.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
34
Still Images Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot.
z z
(
) and choose [
[].
z z [] is displayed.
z z
(
) to shoot.
Still Images Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [
$]. z z
(
), choose [
$] and press the
< n> button.
2
Configure the setting.
z z y> ring to choose the [Delay] time, either press the < q><r> buttons or turn the <
7> dial to choose the number of [Shots], and then press the < m> button.
z z $] is displayed.
z z
•
For movies shot using the self-timer, [Delay] represents the delay before recording begins, but the [Shots] setting has no effect.
•
When you specify multiple shots, image brightness and white balance are determined by the first shot. More time is required between shots when the flash fires or when you have specified to take many shots. Shooting will stop automatically when the memory card becomes full.
•
When a delay longer than two seconds is specified, two seconds before the shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain lit in case the flash fires.)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
35
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (
1
Configure the setting.
z z n> button, choose [Date
Stamp ] on the [
4] tab, and then choose the desired option (
).
z z
] is displayed.
2
Shoot.
z z shooting date or time to the lower-right corner of images.
z z
[Off] in step 1.
•
Date stamps cannot be edited or removed.
•
Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may cause it to be printed twice.
- Print using printer functions (
)
-
Use camera DPOF print settings (
) to print
-
Use the software downloaded from the Canon website to print (
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
36
Using Face ID
If you register a person ahead of time, the camera will detect that person’s face, and prioritize focus, brightness, and color for that person when shooting. In [ ] mode, the camera can detect babies based on registered birthdays and optimize settings for them when shooting.
This function is also useful when searching for a specific registered person among a large number of images (
).
Personal Information
•
Information such as images of a face (face info) registered with Face ID, and personal information (name, birthday) will be saved on the camera.
Additionally, when registered people are detected, their names will be recorded in still images. When using the Face ID function, be careful when sharing the camera or images with others, and when posting images online where many others can view them.
•
When disposing of a camera or transferring it to another person after using Face ID, be sure to erase all information (registered faces, names, and birthdays) from the camera (
).
Registering Face ID Information
You can register information (face info, names, birthdays) for up to 12 people to use with Face ID.
1
Access the setting screen.
z z n> button, choose [Face
ID Settings] on the [
4] tab, and then press the < m> button (
).
z z o><p> buttons or turn the
<
7> dial to choose [Add to Registry], and then press the < m> button.
z z o><p> buttons or turn the
<
7> dial to choose [Add a New Face], and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
37
2
Register face information.
z z person you want to register is inside the gray frame at the center of the screen.
z z indicates that the face is recognized.
Make sure a white frame is displayed on the face, and then shoot.
z z register face information.
z z
< q><r> buttons or turn the <7> dial to choose [OK], and then press the < m> button.
z z
3
Register the person’s name and birthday.
z z m> button to access the keyboard, and then enter the name
(
).
z z screen, choose [Birthday] (either press the < o><p> buttons or turn the <7> dial), and then press the < m> button.
z z q><r> buttons to choose an option.
z z o><p> buttons or turn the z
<
7> dial to specify the date.
When finished, press the < m> button.
4
Save the settings.
z z o><p> buttons or turn the
<
7> dial to choose [Save], and then press the < m> button.
z z
< q><r> buttons or turn the <7> dial to choose [Yes], and then press the < m> button.
5
Continue registering face information.
z z information (expressions or angles), repeat step 2.
z z recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
38
•
The flash will not fire when following step 2.
•
31 ) will not be displayed in [
you register a birthday in step 3.
] mode unless
•
You can overwrite registered face info, and add face info later if you have not filled all 5 face info slots (
Shooting
If you register a person ahead of time, the camera will prioritize that person as the main subject, and optimize focus, brightness, and color for that person when shooting.
z z subject, the names of up to 3 registered people will be displayed when they are detected.
z z z z images. Even if people are detected, but their names are not displayed, the names
(up to 5 people) will be recorded in the image.
•
People other than those registered may be mistakenly detected as the registered person if they share similar facial features.
•
Registered people may not be correctly detected if the captured image or scene differs drastically from the registered face information.
•
If a registered face is not detected, or not easily detected, overwrite registered information with new face info. Registering face info right before shooting will allow for easier detection of registered faces.
•
If a person is mistakenly detected as another person and you continue shooting, you can edit or erase the name recorded in the image during playback (
•
Because faces of babies change quickly as they grow, you should update their
).
•
When information display is set to off (
), names will not display, but will be recorded in the image.
•
If you don’t want names to be recorded in still images, choose [Face ID
Settings] on the [
4] tab, choose [Face ID], and then choose [Off].
•
You can check names recorded in images in the playback screen (simple information display) (
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
39
Checking and Editing Registered Information
1
Access the [Check/Edit Info] screen.
z z
Information” (
), choose [Check/
Edit Info] and press the < m> button.
2
Choose a person to check or edit.
z z o><p><q><r> buttons to choose the person to check or edit, and then press the < m> button.
3
Check or edit the information as needed.
z z the [Edit Profile] screen by pressing the
< o><p> buttons or turning the <7> dial and then pressing the < m> button.
On the screen displayed, you can edit names or birthdays as described in step
3 of “Registering Face ID Information”
(
).
Cover
z z
Info List] (either press the < o><p> buttons or turn the <
7> dial), and then press the < m> button. Press the <m> button on the screen displayed, choose face information to erase by pressing the
< o><p><q><r> buttons or turning the <
7> dial, and then press the <m> button. After [Erase?] is displayed, choose [OK] (either press the < q><r> buttons or turn the <
7> dial), and then press the < m> button.
•
Even if you change names in [Edit Profile], the names recorded in previously shot images will remain the same.
•
You can use the software to edit registered names. Some characters entered with the software may not display on the camera, but will be correctly recorded in images.
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should update face information regularly, especially with babies, as their faces change quickly as they grow.
You can also add face information when all 5 face info slots have not been filled.
1
Access the [Add Face Info] screen.
z z
Info] and press the < m> button.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
40
2
Choose the name of the person whose face info you want to overwrite.
z z o><p><q><r> buttons or turn the <
7> dial to choose the name of a person whose face info you want to overwrite, and then press the < m> button.
z z been registered, a message will be displayed. Choose [OK] (either press the
< q><r> buttons or turn the <7> dial), and then press the < m> button.
z z registered, go to step 4 to add face information.
3
Choose the face info to overwrite.
z z o><p><q><r> buttons or turn the <
7> dial to choose the face info to overwrite, and then press the < m> button.
4
Register face information.
z z
register the new face information.
z z recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
•
You cannot add face information if all 5 information slots are filled. Follow the steps above to overwrite face information.
•
You can follow the above steps to register new face info when there is at least one slot open; however, you cannot overwrite any face information. Instead
of overwriting face info, first erase unwanted existing info ( =
), and then register new face information (
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
41
Erasing Registered Information
You can erase information (face info, names, birthdays) registered to Face
ID. However, names recorded in previously shot images will not be erased.
1
Access the [Erase Info] screen.
z z
Information” (
) and choose [Erase
Info].
2
Choose the name of the person whose info you want to erase.
z z o><p><q><r> buttons or turn the <
7> dial to choose the name of a person to erase, and then press the
< m> button.
z z
< q><r> buttons or turn the <7> dial to choose [OK], and then press the < m> button.
•
If you erase a registered person’s info, you will not be able to
), or
).
•
You can also erase names in image information (
Image Customization Features
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
z z m> button, choose [ ] in the menu, and choose the desired option
z z aspect ratio will be updated.
z z process but choose [ ].
Used for display on widescreen HDTVs or similar display devices.
Same aspect ratio as 35mm film, used for printing images at 5 x 7-inch or postcard sizes.
Native aspect ratio of the camera screen, also used for display on standarddefinition televisions or similar display devices, or for printing images at 3.5 x
5-inch or A-series sizes.
Square aspect ratio.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
42
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see
“Number of 4:3 Shots per Memory Card” (
z z m> button, choose [ ] in the menu, and choose the desired option
(
).
z z displayed.
z z process but choose [ ].
Guidelines for Choosing Resolution Based on Paper
Size (for 4:3 Images)
A2 (16.5 x 23.4 in.) z z
]: For e-mailing images.
A3 – A5
(11.7 x 16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Cover
Still Images
Red-Eye Correction
Red-eye that occurs in flash photography can be automatically corrected as follows.
Before Use
Common Camera
Operations
Basic Guide
1
Access the [Flash Settings] screen.
z z n> button, choose [Flash
Settings] on the [
4] tab, and then press the <
2
Configure the setting.
z z choose [On] (
).
z z R] is displayed.
z z process but choose [Off].
•
Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for example).
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
43
•
You can also correct existing images (
).
•
You can also access the screen in step 2 when the flash is up by pressing the
< r> button and immediately pressing the <n> button.
Movies
Changing Movie Image Quality
2 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card,
see “Recording Time per Memory Card” (
z z m> button, choose [ ] in the menu, and choose the desired option
z z displayed.
z z process but choose [ ].
Image
Quality
Resolution
1280 x 720
Frame Rate
24 fps*
640 x 480 30 fps
* [ ] movies are played back at 30 fps.
Details
For shooting in HD
For shooting in standard definition
•
In [ ] mode, black bars displayed on the top and bottom edges of the screen indicate image areas not recorded.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
44
Helpful Shooting Features
Still Images Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal reference while shooting.
z z n> button, choose [Grid
Lines] on the [
4] tab, and then choose
[On] (
z z are displayed on the screen.
z z process but choose [Off].
•
Grid lines are not recorded in your shots.
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame.
1
Configure the setting.
z z n> button, choose [AF-
Point Zoom] on the [
4] tab, and then choose [On] (
).
2
Check the focus.
z z face detected as the main subject is now magnified.
z z
[Off] in step 1.
•
The area in focus will not be magnified when you press the shutter button halfway if a face was not detected, if the person is too close to the camera and their face is too large for the screen, or if the camera detects subject movement.
•
The display will not magnify when using the digital zoom (
).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
45
Still Images
Checking for Closed Eyes
[ ] is displayed when the camera detects that people may have closed their eyes.
1
Configure the setting.
z z n> button, choose [Blink
Detection] on the [
4] tab, and then
2
Shoot.
z z ] flashes when the camera detects a person whose eyes are closed.
z z
[Off] in step 1.
•
When you have specified multiple shots in [ $] mode, this function is only available for the final shot.
•
A frame is displayed around people whose eyes are closed when you have selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display Time] (
Customizing Camera Operation
Customize shooting functions on the MENU [
4] tab as follows.
For instructions on menu functions, see “Using Menus” (
Still Images
Deactivating the AF-Assist Beam
You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions.
z z n> button, choose [AFassist Beam] on the [
4] tab, and then choose [Off] (
).
z z process but choose [On].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
46
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce redeye when the flash is used in low-light shots.
1
Access the [Flash Settings] screen.
z z n> button, choose [Flash
Settings] on the [
4] tab, and then press the < m> button (
).
2
Configure the setting.
z z
z z process but choose [On].
Cover
Still Images
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after shooting] screen.
z z n> button, choose
[Review image after shooting] on the
[
4] tab, and then press the <m> button
2
Configure the setting.
z z o><p> buttons or turn the <
7> dial to choose [Display Time].
Press the < q><r> buttons to choose the desired option.
z z process but choose [Quick].
Quick
2 sec.,
4 sec.,
8 sec.
Hold
Off
Displays images only until you can shoot again.
Displays images for the specified time. Even while the shot is displayed, you can take another shot by pressing the shutter button halfway again.
Displays images until you press the shutter button halfway.
No image display after shots.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
47
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold]
).
2
Configure the setting.
z z o><p> buttons or turn the
<
7> dial to choose [Display Info]. Press the < q><r> buttons to choose the desired option.
z z process but choose [Off].
Off
Detailed
Displays only the image.
Displays shooting details (
).
•
) is set to [Off] or [Quick], [Display Info] is set to
[Off] and cannot be changed.
•
By pressing the < p> button while an image is displayed after shooting, you can switch the display information. Note that the settings of [Display Info] on the [
4] tab are not changed. You can also erase images by pressing the <a> button, or protect (
94 ) or tag images as favorites (
) by pressing the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
5
6
3
4
1
Camera Basics
2
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
48
3
Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions
Brightness / Color Customization
(Live View Control) .........................................
Specific Scenes ................................................
Making Skin Look Smoother (Smooth Skin) .........
Image Effects (Creative Filters) ......................
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect) ...................................................
Shots Resembling Miniature Models
(Miniature Effect) ...................................................
Shooting with a Toy Camera Effect
(Toy Camera Effect) ..............................................
Shooting with a Soft Focus Effect .........................
Shooting in Monochrome ......................................
Shooting with Color Accent ...................................
Shooting with Color Swap .....................................
Special Modes for Other Purposes ................
Auto Shooting after Face Detection
(Smart Shutter) ......................................................
High-Speed Continuous Shooting
(High-Speed Burst) ...............................................
Shooting Stitch Assist Images ...............................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
49
Still Images
Brightness / Color Customization
Movies
(Live View Control)
Image brightness or colors when shooting can be easily customized as follows.
1
Enter [ ] mode.
z z
].
Brightness
Color
Tone
2
Configure the setting.
z z y> ring to access the setting screen. Press the < o><p> buttons to choose a setting item, and then press the < q><r> buttons or turn the <y> ring or <
7> dial to adjust the value as you watch the screen.
z z m> button.
3
Shoot.
For brighter images, adjust the level to the right, and for darker images, adjust it to the left.
For more vivid images, adjust the level to the right, and for more subdued images, adjust it to the left.
For a warm, reddish tone, adjust the level to the right, and for a cool, bluish tone, adjust it to the left.
Specific Scenes
Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots.
1
Enter [
K] mode. z z K].
Cover
Before Use
Common Camera
Operations
Basic Guide
2
Choose a shooting mode.
z z m> button, choose [I] in the menu, and then choose a shooting mode
3
Shoot.
Still Images Movies
I Shoot portraits (Portrait) z z effect.
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
50
Still Images Movies
PShoot with snowy backgrounds
(Snow)
z z against snowy backgrounds.
Still Images Movies tShoot fireworks (Fireworks) z z
•
In [ t] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure
•
In [ t] mode, although no frames are displayed when you press the shutter button halfway, optimal focus is still determined.
Still Images
Making Skin Look Smoother (Smooth Skin)
You can enhance skin tone to make it look smoother. The effect level and color ([Lighter Skin Tone], [Darker Skin Tone]) can be chosen as follows.
1
Choose [ ].
z z
].
2
Access the setting screen.
z z p> button.
3
Configure the setting.
z z o><p> buttons to choose an option. Choose an effect level (either press the < q><r> buttons or turn the
<
7> dial), and then press the <m> button.
z z look with the effect applied.
4
Shoot.
•
Areas other than people’s skin may be modified.
•
Try taking some test shots first to make sure you obtain the desired results.
•
The effect will be stronger for the face of the person detected as the main subject.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
51
Image Effects (Creative Filters)
Add a variety of effects to images when shooting.
1
Enter [ ] mode.
z z
].
2
Choose a shooting mode.
z z m> button, choose [ ] in the menu, and then choose a shooting mode (
).
3
Shoot.
Still Images Movies
Shoot in vivid colors (Super
Vivid)
z z
Cover
Still Images Movies
Posterized shots (Poster Effect)
z z illustration.
•
In [ ] and [
] modes, try taking some test shots first, to make sure you obtain the desired results.
Shooting with a Fish-Eye Lens Effect
Still Images
(Fish-Eye Effect)
Shoot with the distorting effect of a fish-eye lens.
1
Choose [ ].
z z
[ ].
2
Choose an effect level.
z z y> ring to choose an effect level.
z z look with the effect applied.
3
Shoot.
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
Try taking some test shots first, to make sure you obtain the desired results.
Before Use
Common Camera
Operations
Basic Guide
52
Still Images
Shots Resembling Miniature Models
(Miniature Effect)
Movies
Creates the effect of a miniature model, by blurring image areas above and below your selected area.
You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded.
1
Choose [ ].
z z
(Creative Filters)” (
) and choose
[ ].
z z image area that will not be blurred.
2
Choose the area to keep in focus.
z z p> button.
z z and turn the <
7> dial to move it.
3
For movies, choose the movie playback speed.
z z y> ring to choose the speed.
4
Return to the shooting screen and shoot.
z z m> button to return to the shooting screen, and then shoot.
Playback Speed and Estimated Playback Time (for One-
Minute Clips)
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
•
The zoom is not available when shooting movies. Be sure to set the zoom before shooting.
•
Try taking some test shots first, to make sure you obtain the desired results.
•
To switch the orientation of the frame to vertical, press the < q><r> buttons in step 2. To return the frame to horizontal orientation, press the < o><p> buttons.
•
To move the frame when it is in horizontal orientation, press the < o><p> buttons, and to move the frame when it is in vertical orientation, press the
< q><r> buttons.
•
Holding the camera vertically will change the orientation of the frame.
•
Movie image quality is [
] at an aspect ratio of [ ] and [ ] at an aspect ratio of [ ] (
). These quality settings cannot be changed.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
53
Still Images
Shooting with a Toy Camera Effect
(Toy Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1
Choose [ ].
z z
(Creative Filters)” (
) and choose
[ ].
2
Choose a color tone.
z z y> ring to choose a color tone.
z z look with the effect applied.
3
Shoot.
Standard Shots resemble toy camera images.
Warm Images have a warmer tone than with [Standard].
Cool Images have a cooler tone than with [Standard].
•
Try taking some test shots first, to make sure you obtain the desired results.
Still Images
Shooting with a Soft Focus Effect
This function allows you to shoot images as if a soft focus filter were attached to the camera. You can adjust the effect level as desired.
1
Choose [ ].
z z
[ ].
2
Choose an effect level.
z z y> ring to choose an effect level.
z z look with the effect applied.
3
Shoot.
•
Try taking some test shots first, to make sure you obtain the desired results.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
54
Still Images
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
Movies
1
Choose [ ].
z z
(Creative Filters)” (
) and choose
[ ].
2
Choose a color tone.
z z y> ring to choose a color tone.
z z look with the effect applied.
3
Shoot.
B/W
Sepia
Blue
Black and white shots.
Sepia tone shots.
Blue and white shots.
Still Images
Shooting with Color Accent
Movies
Choose a single image color to keep and change other colors to black and white.
1
Choose [
T]. z z
[
T].
2
Access the setting screen.
z z p> button.
z z image are displayed one after another.
z z kept.
3
Specify the color.
z z to keep, and then press the < q> button.
z z
Recorded Color
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
55
4
Specify the range of colors to keep.
z z o><p> buttons or turn the z
<
7> dial to adjust the range.
To keep only your specified color, choose a large negative value. To keep colors similar to your specified color as well, choose a large positive value.
z z m> button to return to the shooting screen.
5
Shoot.
•
Using the flash in this mode may cause unexpected results.
•
In some shooting scenes, images may look grainy and colors may not look as expected.
Still Images Movies
Shooting with Color Swap
You can replace one image color with another before shooting. Note that only one color can be replaced.
1
Choose [
Y]. z z
(Creative Filters)” (
) and choose
[
Y].
2
Access the setting screen.
z z p> button.
z z image are displayed one after another.
z z gray.
Cover
3
Specify the color to replace.
z z to replace, and then press the < q> button.
z z
Before Use
Common Camera
Operations
Basic Guide
4
Specify the new color.
z z z color, and then press the < r> button.
The specified color is recorded.
5
Specify the range of colors to replace.
z z o><p> buttons or turn the
<
7> dial to adjust the range.
z z choose a large negative value. To replace colors similar to your specified color as well, choose a large positive value.
z z m> button to return to the shooting screen.
6
Shoot.
•
Using the flash in this mode may cause unexpected results.
•
In some shooting scenes, images may look grainy and colors may not look as expected.
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
56
Special Modes for Other Purposes
Auto Shooting after Face Detection
(Smart Shutter)
Still Images
Auto Shooting after Smile Detection
The camera shoots automatically after detecting a smile, even without you pressing the shutter button.
1
Choose [ ].
z z
(
) and choose [ ], and then press the < p> button.
z z q><r> buttons or turn the
<
7> dial to choose [ ], and then press the < m> button.
z z mode, and [Smile Detection on] is displayed.
2
Aim the camera at a person.
z z will shoot after the lamp lights up.
z z q> button. Press the < q> button again to resume detection.
Cover
•
Switch to another mode when you finish shooting, or the camera will continue shooting each time a smile is detected.
•
You can also shoot as usual by pressing the shutter button.
•
The camera can detect smiles more easily when subjects face the camera and open their mouth wide enough so that teeth are visible.
•
To change the number of shots, press the < o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (
) is only available for the final shot.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
57
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1
Choose [ ].
z z
(
) and choose [ ], and then press the < p> button.
z z q><r> buttons or turn the
<
7> dial to choose [ ], and then press the < m> button.
2
Compose the shot and press the shutter button halfway.
z z around the face of the person who will wink.
3
Press the shutter button all the way down.
z z mode, and [Wink to take picture] is displayed.
z z is played.
4
Face the camera and wink.
z z after detecting a wink by the person whose face is inside the frame.
z z triggered the self-timer, press the
< n> button.
•
If the wink is not detected, wink again slowly and deliberately.
•
Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•
Closing and opening both eyes at once will also be detected as a wink.
•
If winking is not detected, the camera will shoot about 15 seconds later.
•
To change the number of shots, press the < o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (
) is only available for the final shot.
•
If no one is in the shooting area when the shutter button is pressed all the way down, the camera will shoot after a person enters the shooting area and winks.
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area
(
70 ). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
z z
], and then press the < p> button.
z z q><r> buttons or turn the
<
7> dial to choose [ ], and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
58
2
Compose the shot and press the shutter button halfway.
z z around the face you focus on and white frames around other faces.
3
Press the shutter button all the way down.
z z mode, and [Look straight at camera to start count down] is displayed.
z z is played.
4
Join the subjects in the shooting area and look at the camera.
z z lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot.
z z triggered the self-timer, press the
< n> button.
•
Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later.
•
To change the number of shots, press the < o><p> buttons after choosing
[
] in step 1. [Blink Detection] (
) is only available for the final shot.
Still Images
High-Speed Continuous Shooting
(High-Speed Burst)
You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see
1
Choose [ ].
z z
].
2
Shoot.
z z to shoot continuously.
•
The resolution is [ ] (1824 x 1368) and cannot be changed.
•
Focus, image brightness, and color are determined by the first shot.
•
Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
•
As more shots are taken, shooting may slow down.
Images Displayed during Playback
Each set of images shot continuously is managed as a single group, and only the first image in that group will be displayed. To indicate that the image is part of a group, [ ] is displayed in the upper left of the screen.
•
If you erase a grouped image (
), all images in the group are also erased. Be careful when erasing images.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
59
•
Grouped images can be played back individually (
) and ungrouped
).
•
Protecting (
94 ) a grouped image will protect all images in the group.
•
Grouped images can be viewed individually when played back using Image
Search (
). In this case, images are temporarily ungrouped.
•
These actions are not available for grouped images: editing Face ID
), magnifying (
), editing (
–
), printing (
), setting up individual image printing (
), or adding to a photobook (
). To do these things, either view grouped images individually (
) first.
Still Images
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions, and then
) to combine them into a panorama.
1
Choose [
x] or [v]. z z
(
) and choose [ x] or [v].
2
Take the first shot.
z z and white balance.
Cover
3
Take additional shots.
z z partially overlaps the image area of the z first shot.
Minor misalignment of overlapping portions will be corrected automatically when the images are combined.
z z way you took the second shot.
4
Finish shooting.
z z m> button.
5
Use the software to combine the images.
z z refer to “Software Instruction Manual”
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
4
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
60
4
P Mode
More discerning shots, in your preferred shooting style
•
Instructions in this chapter apply to the camera with the mode dial set to [
G] mode.
•
[
G]: Program AE; AE: Auto Exposure
•
Before using a function introduced in this chapter in modes other than [
G], make sure the function is available in that mode
(
Shooting in Program AE ([P] Mode) ...............
Image Brightness (Exposure) .........................
(Exposure Compensation) ....................................
Locking Image Brightness / Exposure (AE Lock) ..
Changing the Metering Method .............................
Changing the ISO Speed ......................................
Correcting Image Brightness (i-Contrast) ..............
Color and Continuous Shooting .....................
Adjusting White Balance .......................................
Changing Image Color Tones (My Colors) ............
Continuous Shooting .............................................
Shooting Range and Focusing .......................
Shooting Close-Ups (Macro) .................................
Shooting in Manual Focus Mode ...........................
Digital Tele-Converter ............................................
Changing the AF Frame Mode ..............................
Changing the Focus Setting ..................................
Choosing a Person to Focus On (Face Select) .....
Shooting with the AF Lock .....................................
Flash ..................................................................
Changing the Flash Mode .....................................
Adjusting the Flash Exposure Compensation .......
Shooting with the FE Lock ....................................
Changing the Flash Timing ...................................
Other Settings ..................................................
Changing the Compression Ratio
(Image Quality) ......................................................
Changing the IS Mode Settings ............................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
61
Still Images Movies
Shooting in Program AE ([P] Mode)
You can customize many function settings to suit your preferred shooting style.
1
Enter [
G] mode. z z G].
z z
(
) and choose [
G].
2
Customize the settings as
), and then shoot.
•
If adequate exposure cannot be obtained when you press the shutter button halfway, shutter speeds and aperture values are displayed in orange. In this case, try adjusting the ISO speed (
) or activating the flash (if subjects
), which may enable adequate exposure.
•
Movies can be recorded in [
G] mode as well, by pressing the movie button.
However, some FUNC. (
) settings may be automatically adjusted for movie recording.
•
For details on the shooting range in [
Image Brightness (Exposure)
Still Images
Adjusting Image Brightness (Exposure
Movies
Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –2 to +2.
Cover
Before Use
Common Camera
Operations
Basic Guide
z z o> button. As you watch the screen, turn the <
7> dial to adjust brightness.
z z displayed.
z z exposure compensation bar displayed.
z z
< m> button to display the set exposure compensation amount, and then shoot.
•
You can customize camera operation so that turning the < y> ring changes the correction level (
•
You can also shoot still images with exposure compensation bar displayed.
•
While recording a movie, [ ] is displayed, and the exposure is locked.
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
62
Still Images
Locking Image Brightness / Exposure (AE
Lock)
Before shooting, you can lock the exposure, or you can specify focus and exposure separately.
1
Lock the exposure.
z z with the exposure locked. With the shutter button pressed halfway, press the
< o> button.
z z
] is displayed, and the exposure is locked.
z z and press the < o> button again. In this case, [
] is no longer displayed.
2
Compose the shot and shoot.
z z
] is no longer displayed.
•
AE: Auto Exposure
•
After the exposure is locked, you can adjust the combination of shutter speed and aperture value by turning the <
7> dial (Program Shift).
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting conditions as follows.
z z m> button, choose [ ] in the menu, and choose the desired option
).
z z displayed.
Evaluative
For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.
Center
Weighted Avg.
Determines the average brightness of light across the entire image area, calculated by treating brightness in the central area as more important.
Spot
Metering restricted to within the [ ] (Spot AE Point frame). You
can also link the Spot AE Point frame to the AF frame (
).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
63
Still Images
Linking the Spot AE Point Frame to the AF Frame
1
Set the metering method to [ ].
z z
[ ].
2
Configure the setting.
z z n> button, choose
[Spot AE Point] on the [
4] tab, and then choose [AF Point] (
).
z z linked to the movement of the AF frame
(
).
•
Not available when [AF Frame] is set to [Face AiAF] (
) or
[Tracking AF] (
).
Cover
Still Images
Changing the ISO Speed
z z m> button, choose [ ] in the menu, and choose the desired option
).
z z displayed.
Automatically adjusts the ISO speed to suit the shooting mode and conditions.
Low
High
For shooting outdoors in fair weather.
For shooting in cloudy conditions, or at twilight.
For shooting night scenes, or in dark rooms.
•
To view the automatically set ISO speed when the camera is set to [ ], press the shutter button halfway.
•
Although choosing a lower ISO speed may reduce image graininess, there may be a greater risk of subject blurriness in some shooting conditions.
•
Choosing a higher ISO speed will increase shutter speed, which may reduce subject blurriness and increase the flash range. However, shots may look grainy.
•
You can customize camera operation so that turning the < y> ring changes the
).
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
64
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast can also be automatically corrected before shooting to make subjects stand out better.
z z n> button, choose
[i-Contrast] on the [
4] tab, and then choose [Auto] (
).
z z @] is displayed.
•
Under some shooting conditions, correction may be inaccurate or may cause images to appear grainy.
•
You can also correct existing images (
).
Color and Continuous Shooting
Still Images Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting.
z z m> button, choose [ ] in the menu, and choose the desired option
z z displayed.
Auto
Automatically sets the optimal white balance for the shooting conditions.
For shooting outdoors in fair weather.
Day Light
Cloudy For shooting in cloudy conditions, in the shade, or at twilight.
Tungsten
For shooting under ordinary incandescent (tungsten) lighting and similarly colored fluorescent lighting.
Fluorescent
Fluorescent H
For shooting under warm-white (or similarly colored) or coolwhite fluorescent lighting.
For shooting under daylight fluorescent and similarly colored fluorescent lighting.
Custom
For manually setting a custom white balance (
).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
65
Still Images Movies
Custom White Balance
For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot.
z z
].
z z so that the entire screen is white. Press the < > button.
z z white balance data has been recorded.
•
Colors may look unnatural if you change camera settings after recording white balance data.
Still Images Movies
Changing Image Color Tones (My Colors)
Change image color tones as desired, such as converting images to sepia or black and white.
z z m> button, choose [ ] in the menu, and choose the desired option
(
z z displayed.
My Colors Off
Vivid
Neutral
Sepia
B/W
Positive Film
Lighter Skin Tone
Darker Skin Tone
Vivid Blue
Vivid Green
Vivid Red
Custom Color
–
Emphasizes contrast and color saturation, making images sharper.
Tones down contrast and color saturation for subdued images.
Creates sepia tone images.
Creates black and white images.
Combines the effects of Vivid Blue, Vivid Green, and
Vivid Red to produce intense yet natural-looking colors resembling images on positive film.
Lightens skin tones.
Darkens skin tones.
Emphasizes blues in images. Makes the sky, ocean, and other blue subjects more vivid.
Emphasizes greens in images. Makes mountains, foliage, and other green subjects more vivid.
Emphasizes reds in images. Makes red subjects more vivid.
Adjust contrast, sharpness, color saturation, and other
).
•
White balance (
) cannot be set in [ ] or [ ] modes.
•
With [ ] and [ ] modes, colors other than people’s skin tone may change. These settings may not produce the expected results with some skin tones.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
66
Still Images Movies
Custom Color
Choose the desired level of image contrast, sharpness, color saturation, red, green, blue, and skin tones in a range of 1 – 5.
1
Access the setting screen.
z z
choose [ ], and then press the < n> button.
2
Configure the setting.
z z o><p> buttons to choose an option, and then specify the value by pressing the < q><r> buttons or turning the <
7> dial.
z z darker skin tones), adjust the value to the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to the left.
z z n> button to complete the setting.
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Continuous Shooting
1
Configure the setting.
z z m> button, choose [ ] in the menu, and choose the desired option
z z displayed.
2
Shoot.
z z to shoot continuously.
Mode
W Continuous
Description
Continuous shooting, with the focus and exposure determined when you press the shutter button halfway.
Continuous
Shooting AF*
Continuous shooting and focusing.
[AF Frame] is set to [Center] and cannot be changed.
(
] is changed to [ ].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
67
•
Cannot be used with the self-timer (
) or [Blink Detection]
(
).
•
Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
•
As more shots are taken, shooting may slow down.
•
Shooting may slow down if the flash fires.
•
), the location in the image where the name is recorded will be determined in the first shot, and will be recorded in the same place for further shots.
Shooting Range and Focusing
Still Images
Shooting Close-Ups (Macro)
To restrict the focus to subjects at close range, set the camera to [ e]. For
details on the focusing range, see “Shooting Range” (
Cover
Before Use
Common Camera
Operations
Basic Guide
z z q> button, choose [e] (either press the < q><r> buttons or turn the
<
7> dial), and then press the <m> button.
z z e] is displayed.
•
If the flash fires, vignetting may occur.
•
To prevent camera shake, try mounting the camera on a tripod and shooting with the camera set to [
[] (
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
68
Still Images
Shooting in Manual Focus Mode
Movies
When focusing is not possible in AF mode, use manual focus. You can specify the general focal position and then press the shutter button halfway to have the camera determine the optimal focal position near the position
you specified. For details on the focusing range, see “Shooting Range”
MF Indicator
1
Choose [
f]. z z q> button, choose [f]
(either press the < q><r> buttons or turn the <
7> dial), and then press the <m> button.
z z
2
Specify the general focal position.
z z bar (which shows the distance and focal position) and the magnified display area, press the < o><p> buttons or turn the
<
7> dial to specify the general focal position, and then press the < m> button.
3
Fine-tune the focus.
z z the camera fine-tune the focal position
(Safety MF).
Cover
•
When you focus manually, the AF frame mode (
[FlexiZone] and AF frame size (
) is [Normal], and these settings cannot be changed.
•
Focusing is possible when using the digital zoom (
) or digital
69 ), or when using a TV as a display (
but the magnified display will not appear.
•
You can also adjust the focus by turning the <
).
•
To focus more accurately, try attaching the camera to a tripod to stabilize it.
•
To hide the magnified display area, press the < n> button and set [MF-
Point Zoom] on the [
4] tab to [Off] (
•
To deactivate automatic focus fine-tuning when the shutter button is pressed halfway, press the < n> button and set [Safety MF] on the [4] tab to [Off]
(
Still Images Movies
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.4x or 1.8x.
This can reduce camera shake because the shutter speed is faster than it would be if you zoomed (including using digital zoom) in to the same zoom factor.
z z n> button, choose
[Digital Zoom] on the [
4] tab, and then choose the desired option (
z z is displayed on the screen.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
69
•
The digital tele-converter cannot be used with digital zoom
(
) or AF-point zoom (
).
•
The respective focal lengths when using [1.4x] and [1.8x] are 33.6 – 168.0 mm and 43.2 – 216.0 mm (35mm film equivalent).
•
The shutter speed may be equivalent when you move the zoom lever all the way toward < i> for maximum telephoto, and when you zoom in to enlarge the subject to the same size following step 2 in “Zooming In Closer on Subjects
).
Movies Still Images
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as follows.
z z n> button, choose [AF
Frame] on the [
4] tab, and then choose
Cover
Still Images Movies
Face AiAF
•
Detects people’s faces, and then sets the focus, exposure (evaluative metering only), and white balance ([ ] only).
•
After you aim the camera at the subject, a white frame is displayed around the person’s face determined by the camera to be the main subject, and up to two gray frames are displayed around other detected faces.
•
When the camera detects movement, frames will follow moving subjects, within a certain range.
•
After you press the shutter button halfway, up to nine green frames are displayed around faces in focus.
•
If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the areas in focus when you press the shutter button halfway.
•
If faces are not detected when Servo AF (
) is set to [On], the
AF frame is displayed in the center of the screen when you press the shutter button halfway.
•
Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
-
Faces in profile, at an angle, or partly hidden
•
The camera may misinterpret non-human subjects as faces.
•
No AF frames are displayed if the camera cannot focus when you press the shutter button halfway.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
70
Still Images
FlexiZone/Center
One AF frame is displayed. Effective for reliable focusing.
With [FlexiZone], you can move and resize the AF frame (
).
•
A yellow AF frame is displayed with [ ] if the camera cannot focus when you press the shutter button halfway.
•
To compose shots so that subjects are positioned at the edge or in a corner, first aim the camera to capture the subject in an AF frame, and then hold the shutter button halfway down. As you continue to hold the shutter button halfway, recompose the shot as desired, and then press the shutter button all the way down (Focus Lock).
•
The AF frame position is enlarged when you press the shutter button halfway and [AF-Point Zoom] (
Still Images
Moving and Resizing AF Frames (FlexiZone)
When you want to change the position or size of the AF frame, set the AF frame mode to [FlexiZone] (
1
Prepare to move the AF frame.
z z
> button. The AF frame turns orange.
Cover
2
Move and resize the AF frame.
z z 7> dial or <y> ring to move the AF frame, or press the
< o><p><q><r> buttons to move it by a smaller amount.
z z position in the center, keep the < > button held down.
z z
< n> button. Press it again to restore it to the original size.
3
Finish the setup process.
z z
> button.
•
AF frames are displayed at normal size when you use the digital zoom (
) or digital tele-converter (
), and in manual focus mode (
).
•
You can also link the Spot AE Point frame to the AF frame (
).
•
You can also configure the AF frame size by pressing the < n> button and choosing [AF Frame Size] on the [
4] tab.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
71
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
z z
[Tracking AF].
z z
] is displayed in the center of the screen.
2
Choose a subject to focus on.
z z
] is on the desired subject, and then press the < > button.
z z beeps and [ ] is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range.
z z
] is displayed.
z z
> button again.
3
Shoot.
z z
] changes to a blue [ ], which follows the subject as the camera continues to adjust the focus and exposure (Servo AF)
z z to shoot.
z z
] is still displayed and the camera continues to track the subject.
•
[Servo AF] (
) is set to [On] and cannot be changed.
•
Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.
•
[AF-Point Zoom] on the [
4] tab is not available.
•
[ e] is not available.
•
The camera can detect subjects even if you press the shutter button halfway without pressing the < > button. After your shot, [ ] is displayed in the center of the screen.
•
If [Face ID] is set to [On], names will not display when registered people
are detected, but the names will be recorded in the still images (
).
However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
72
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway.
1
Configure the setting.
z z n> button, choose
[Servo AF] on the [
4] tab, and then
2
Focus.
z z where the blue AF frame is displayed while you are pressing the shutter button halfway.
•
Focusing may not be possible in some shooting conditions.
•
In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode.
•
If adequate exposure cannot be obtained, shutter speeds and aperture values are displayed in orange. Release the shutter button, and then press it halfway again.
•
AF lock shooting is not available.
•
[AF-Point Zoom] on the [
4] tab is not available.
•
Not available when using the self-timer (
Cover
Still Images
Changing the Focus Setting
You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. Instead, you can limit camera focusing to the moment you press the shutter button halfway.
On
Off
Before Use
Common Camera
Operations
Basic Guide
z z n> button, choose
[Continuous AF] on the [
4] tab, and then choose [Off] (
).
Helps avoid missing sudden photo opportunities, because the camera constantly focuses on subjects until you press the shutter button halfway.
Conserves battery power, because the camera does not focus constantly.
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
73
Still Images
Choosing a Person to Focus On (Face Select)
You can shoot after choosing a specific person’s face to focus on.
1
Prepare the camera for Face
Select.
z z
(
).
2
Enter Face Select mode.
z z press the < > button.
z z face frame [ ] is displayed around the face detected as the main subject.
z z
[ ] follows the subject within a certain range.
z z
] is not displayed.
3
Choose the face to focus on.
z z
] to another detected face, press the < > button.
z z to all detected faces, [Face Select : Off] is displayed, and the specified AF frame mode screen is displayed again.
4
Shoot.
z z camera focuses, [ ] changes to [ ].
z z to shoot.
•
When [Face ID] is set to [On], names of any registered people detected are not displayed when you have selected another, unregistered face to focus on.
However, their names will be recorded in the still images (
).
Shooting with the AF Lock
Still Images Movies
The focus can be locked. After you lock the focus, the focal position will not change even when you release your finger from the shutter button.
1
Lock the focus.
z z press the < q> button.
z z f] and the MF indicator are displayed.
z z button halfway down and press the < q> button again.
2
Compose the shot and shoot.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
74
Flash
Still Images
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For details on
the flash range, see “Flash Range” ( =
1
Raise the flash.
z z h> switch.
2
Configure the setting.
z z r> button, choose a flash mode (either press the < q><r> buttons or turn the <
7> dial), and then press the
< m> button.
z z displayed.
•
The setting screen cannot be accessed by pressing the < r> button when the flash is lowered. Move the < h> switch to raise the flash, then configure the setting.
[ ] Auto
Fires automatically in low-light conditions.
[
h] On
Fires for each shot.
[
Z] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range.
•
In [
Z] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (
).
•
In [
Z] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing.
[
!] Off
For shooting without the flash.
•
If a blinking [ ] icon is displayed when you press the shutter button halfway in low-light conditions, mount the camera on a tripod or take other measures to keep it still.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
75
Still Images
Adjusting the Flash Exposure Compensation
Just as with regular exposure compensation (
), you can adjust the flash exposure from –2 to +2 stops, in 1/3-stop increments.
z z r> button and immediately turn the < y> ring to choose the compensation level, and then press z the < m> button.
z
X] is displayed.
•
When there is a risk of overexposure, the camera automatically adjusts the shutter speed or aperture value during the flash shots to reduce washedout highlights and shoot at optimal exposure. However, you can deactivate automatic adjustment of the shutter speed and aperture value by accessing
MENU (
4] tab > [Flash Settings] > [Safety FE] > [Off].
•
You can also configure the flash exposure compensation by accessing MENU
) and choosing [
4] tab > [Flash Settings] > [Flash Exp. Comp].
•
You can also access the [Flash Settings] MENU screen when the flash is up by pressing the < r> button and immediately pressing the <n> button.
Cover
Still Images
Shooting with the FE Lock
), you can lock the exposure for the flash
shots.
1
Raise the flash and set it to [h]
(
2
Lock the flash exposure.
z z with the exposure locked. With the shutter button pressed halfway, press the
< o> button.
z z displayed, the flash output level is retained.
z z and press the < o> button again. In this case, [ ] is no longer displayed.
3
Compose the shot and shoot.
z z
] is no longer displayed.
•
FE: Flash Exposure
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
76
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
Still Images
1
Access the setting screen.
z z n> button, choose [Flash
Settings] on the [
4] tab, and then press the < m> button (
).
2
Configure the setting.
z z
1st-curtain
The flash fires immediately after the shutter opens.
2nd-curtain
The flash fires immediately before the shutter closes.
Other Settings
Still Images
Changing the Compression Ratio (Image
Quality)
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as follows. For guidelines on how many shots at each compression ratio can fit
on a memory card, see “Number of 4:3 Shots per Memory Card” (
z z m> button, choose [ ] in the menu, and choose the desired option
).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
77
Still Images
Changing the IS Mode Settings
Movies z z n> button, choose [IS
Mode] on the [
4] tab, and then press the
< q><r> buttons to choose the desired
Continuous
Optimal image stabilization for the shooting conditions is automatically
).
Shoot Only* Image stabilization is active only at the moment of shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
•
If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
1
2
Camera Basics
Auto Mode
3
Other Shooting
Modes
4
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
78
5
Tv, Av, and M Mode
Take smarter, more sophisticated shots, and customize the camera for your shooting style
•
Instructions in this chapter apply to the camera as set to the respective mode.
Specific Shutter Speeds ([Tv] Mode) ..............
Specific Aperture Values ([Av] Mode) ............
Specific Shutter Speeds and Aperture Values
([M] Mode) ........................................................
Adjusting the Flash Output ....................................
Customization for Shooting Styles ................
Changing Control Ring Settings ............................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
79
Still Images
Specific Shutter Speeds ([Tv] Mode)
Set your preferred shutter speed before shooting as follows. The camera automatically adjusts the aperture value to suit your shutter speed.
For details on available shutter speeds, see “Shutter Speed” (
1
Enter [
M] mode. z z
M].
2
Set the shutter speed.
z z y> ring to set the shutter speed.
•
With shutter speeds of 1.3 seconds or slower, there will be a delay before you can shoot again, as images are processed to remove noise.
•
When shooting at low shutter speeds on a tripod, you should set [IS
Mode] to [Off] (
).
•
Orange display of aperture values when you press the shutter button halfway indicates that the settings deviate from standard exposure. Adjust the shutter speed until the aperture value is
displayed in white, or use safety shift (
•
[
M]: Time value
•
You can customize camera operation so that turning the <
7> dial changes the
Cover
Still Images
Specific Aperture Values ([Av] Mode)
Set your preferred aperture value before shooting as follows. The camera automatically adjusts the shutter speed to suit your aperture value.
For details on available aperture values, see “Aperture” (
1
Enter [
B] mode. z z
B].
2
Set the aperture value.
z z y> ring to set the aperture value.
•
Orange display of shutter speeds when you press the shutter button halfway indicates that the settings deviate from standard exposure.
Adjust the aperture value until the shutter speed is displayed in white, or use safety shift (see below).
•
[
B]: Aperture value (size of the opening made by the iris in the lens)
•
To avoid exposure problems in [
M] and [B] modes, you can have the camera automatically adjust the shutter speed or aperture value, even when standard exposure cannot otherwise be obtained. Press the < n> button and set [Safety Shift] on the [
).
However, safety shift is disabled when the flash fires.
•
You can customize camera operation so that turning the <
7> dial changes the aperture value (
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
80
Still Images
Specific Shutter Speeds and Aperture
Values ([M] Mode)
Follow these steps before shooting to set your preferred shutter speed and aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see “Shutter
Aperture Value
Shutter Speed
Standard
Exposure Level
Exposure Level Mark
Exposure
Level Indicator
1
Enter [
D] mode. z z D].
2
Configure the setting.
z z 7> dial to set the shutter speed, and turn the < y> ring to set the aperture value.
z z specified value is shown on the exposure level indicator for comparison to the standard exposure level.
z z in orange when the difference from standard exposure exceeds 2 stops. [–2] or [+2] is displayed in orange in the lower right when you press the shutter button halfway.
Cover
•
After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot.
•
Screen brightness may change depending on your specified shutter speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [ h].
•
To have both the shutter speed and aperture value automatically adjusted to obtain standard exposure, hold the shutter button halfway and press the < o> button. Note that standard exposure may not be possible with some settings.
•
[
D]: Manual
•
Calculation of standard exposure is based on the specified metering method
(
•
You can customize camera operation so that turning the < y> ring adjusts the shutter speed and turning the <
7> dial adjusts the aperture value ( =
).
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
81
Still Images
Adjusting the Flash Output
Choose from the three flash levels in [
D] mode.
1
Enter [
D] mode. z z D].
2
Configure the setting.
z z r> button and immediately turn the < y> ring to choose the flash level, and then press the < m> button.
z z X] is displayed.
•
You can also set the flash level by choosing [
),
) and choosing [
4] tab > [Flash Settings] >
[Flash Output].
•
You can set the flash level in [ M] or [B] mode by accessing MENU
) and choosing [
4] tab > [Flash Settings] > [Flash Mode] > [Manual].
•
You can also access the [Flash Settings] MENU screen when the flash is up by pressing the < r> button and then the <n> button.
Customization for Shooting Styles
Movies Still Images
Changing Control Ring Settings
Reassign control ring functions as follows.
1
Choose a function to assign to the <
y> ring. z z n> button and choose
[
4] tab
>
[Set Control Ring Func.]. Press the < m> button, and then press the
< q><r> buttons or turn the <y> ring or
<
7> dial to choose the desired option
2
Configure the assigned function.
z z y> ring or the <7> dial to configure the assigned function.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
82
Functions Assignable to the Control Ring
Functions you can assign to the control ring vary depending on shooting mode, and those assignments determine which functions you can assign to the control dial.
b f
Item
7 y
7 y y
7 y y y
D
Av
Tv
ISO
Tv, Av*
Shooting Mode
B M
Av Tv
– –
ISO
Av
ISO
Tv
Tv +/–
Av Av
).
The aspect ratio can be changed (
).
+/–
Tv
G
Step Zoom
–
ISO
–
+/–
–
•
+/–: exposure compensation (
•
When you assign [ f], [
], or [ ] to the < y> ring, the functions you can assign to the <
7> dial are the same as for [
].
* Tv and Av settings can be toggled by pressing the < o> button.
•
In shooting modes other than these (except [ ]), the < y> ring can be used for step zooming (
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
83
6
Playback Mode
Have fun reviewing your shots, and browse or edit them in many ways
•
To prepare the camera for these operations, press the <
1> button to enter Playback mode.
•
It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
Viewing ..............................................................
Switching Display Modes ......................................
Checking People Detected in Face ID ..................
Browsing and Filtering Images .......................
Navigating through Images in an Index.................
Finding Images Matching Specified Conditions ....
Using the Control Ring to Jump ............................
Viewing Individual Images in a Group ...................
Editing Face ID Information ............................
Image Viewing Options ....................................
Magnifying Images ................................................
Viewing Slideshows ..............................................
Auto Playback of Related Images
(Smart Shuffle) ......................................................
Protecting Images ............................................
Using the Menu .....................................................
Choosing Images Individually ...............................
Selecting a Range .................................................
Specifying All Images at Once ..............................
Erasing Images .................................................
Erasing Multiple Images at Once ..........................
Rotating Images ...............................................
Using the Menu .....................................................
Deactivating Auto Rotation ....................................
Tagging Images as Favorites ........................
Editing Still Images ........................................
Resizing Images ..................................................
Cropping ..............................................................
Changing Image Color Tones (My Colors) ..........
Correcting Image Brightness (i-Contrast) ............
Correcting Red-Eye .............................................
Editing Movies ................................................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
84
Still Images Movies
Viewing
After shooting images or movies, you can view them on the screen as follows.
1
Enter Playback mode.
z z 1> button.
z z
2
Browse through your images.
z z the < q> button or turn the <7> dial counterclockwise. To view the next image, press the < r> button or turn the
<
7> dial clockwise.
z z q><r> buttons to browse through images quickly.
z z
<
7> dial rapidly. In this mode, turn the
<
7> dial to browse through images.
z z the < m> button.
z z date, press the < o><p> buttons in
Scroll Display mode.
Volume Indicator z z play movies, go to step 3.
Cover
] icon. To
Before Use
Common Camera
Operations
Basic Guide
3
Play movies.
z z m> button, choose [ ] (either press the < o><p> buttons or turn the <
7> dial), and then press the < m> button again.
4
Adjust the volume.
z z o><p> buttons to adjust the volume.
z z indicator is no longer displayed, press the
< o><p> buttons.
5
Pause playback.
z z
< m> button.
z z displayed.
] is
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
85
•
To switch to Shooting mode from Playback mode, press the shutter button halfway.
•
To deactivate Scroll Display, press the < n> button, choose [Scroll
Display] on the [
1] tab, and then choose [Off].
•
If you prefer to have the most recent shot displayed when you enter Playback mode, press the < n> button, and on the [1] tab, choose [Resume] and then [Last shot].
•
To change the transition shown between images, press the < n> button, choose [Transition] on the [
1] tab, and then choose the desired effect.
Still Images Movies
Switching Display Modes
Press the < p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (
No Information Display Simple Information Display Detailed Information Display
Cover
Still Images Movies
Overexposure Warning (for Image Highlights)
Washed-out highlights in the image flash on the screen in detailed information display (
).
Histogram
Dark Bright
High
Low
Before Use
Common Camera
Operations
Basic Guide
Still Images Movies z z
86 ) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree of brightness, and the vertical axis, how much of the image is at each level of brightness. Viewing the histogram is a way to check exposure.
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
86
Still Images Movies
GPS Information Display
z z camera via Wi-Fi, you can geotag images on the camera, adding information such as latitude, longitude, and elevation
(
). Geotagged images are labeled with a [ ] icon in detailed information display. Press the < o> button to view the information recorded.
z z
(shooting date and time) are listed from top to bottom.
z z o> button again to return to detailed information display.
•
GPS information display is not available for images that lack this information.
•
[---] is shown instead of numerical values for items not available on your smartphone or items not recorded correctly.
•
UTC: Coordinated Universal Time, essentially the same as Greenwich Mean
Time
Still Images
Checking People Detected in Face ID
If you switch the camera to simple information display mode (
), the names of up to five detected people registered in Face ID (
) will be displayed.
z z p> button several times until simple information display is activated, and then press the < q><r> buttons or turn the <
7> dial to choose an image.
z z people.
•
If you do not want names to display on images shot using Face ID, press the
< n> button, choose [Face ID Info] on the [1] tab, and then set [Name
Display] to [Off].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
87
Browsing and Filtering Images
Still Images
Navigating through Images in an Index
Movies
By displaying multiple images in an index, you can quickly find the images you are looking for.
1
Display images in an index.
z z g> to display images in an index. Moving the lever again will increase the number of images shown.
z z lever toward < k>. Fewer images are shown each time you move the lever.
2
Choose an image.
z z 7> dial to scroll through the images.
z z o><p><q><r> buttons to choose an image.
z z selected image.
z z m> button to view the selected image in single-image display.
Cover
Still Images Movies
Finding Images Matching Specified Conditions
Find desired images quickly on a memory card full of images by filtering image display according to your specified conditions. You can also protect
(
97 ) these images all at once.
Name
Displays images of a registered person (
).
People
Shot Date
Favorites
Displays images with detected faces.
Displays the images shot on a specific date.
Displays images tagged as favorites (
).
Still image/Movie Displays only still images or movies.
1
Choose a search condition.
z z m> button, choose [ ] in the menu, and choose a condition z
When you have selected [ ], [ ], or
[ ], choose the condition by pressing the
< o><p><q><r> buttons or turning the
<
7> dial on the screen displayed, and then press the < m> button.
2
View the filtered images.
z z displayed in yellow frames. To view only these images, press the < q><r> buttons, or turn the <
7> dial.
z z step 1.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
88
•
When the camera has found no corresponding images for some conditions, those conditions will not be available. Note that [ ] is
not available unless people are registered (
•
To show or hide information, press the < p> button in step 2.
•
Options for viewing the images found (in step 2) include “Navigating through
92 ). You can protect, erase, or print all images found or add
them to a photobook by choosing [Select All Images in Search] in “Protecting
94 ), “Erasing Multiple Images at Once” (
Images to the Print List (DPOF)” (
154 ), or “Adding Images to a Photobook”
•
If you edit images and save them as new images (
–
), a message is displayed, and the images that were found are no longer shown.
Still Images
Using the Control Ring to Jump
Movies
Use the control ring to find and jump between desired images quickly by filtering image display according to your specified conditions.
Jump to Favorites
Jump Shot Date
Displays images tagged as favorites (
Jumps to the first image in each group of images that were shot on the same date.
Jump 10 Images Jumps by 10 images at a time.
Jump 100 Images Jumps by 100 images at a time.
1
Choose a condition.
z z single-image display by turning the < y> ring and then pressing the < o><p> buttons.
2
View images matching your specified condition, or jump by the specified amount.
z z y> ring to view only images matching the condition or jump by the specified number of images forward or back.
•
Turning the < y> ring when browsing images in index display will jump to the previous or next image according to the jump method chosen in single-image display. However, if you have chosen [ ] or [ ], the jump method will be switched to [ ].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
89
Still Images
Viewing Individual Images in a Group
Images shot in [ ] mode (
) are grouped for display, and these grouped images can be viewed one at a time.
1
Choose a grouped image.
z z q><r> buttons or turn the
<
7> dial to choose an image labeled with [ ].
2
Choose [ ].
z z m> button, and then choose
[
3
View images in the group individually.
z z q><r> buttons or turning the <
7> dial will display only images in the group.
z z
< m> button, choose [ ] in the menu, and press the < m> button again
(
).
•
During group playback (step 3), you can use the menu functions accessed by pressing the < m> button. You can also browse through images quickly
“Navigating through Images in an Index” (
92 ). By choosing [All Images in Group] for
94 ), “Erasing Multiple Images at Once” (
“Adding Images to the Print List (DPOF)” (
156 ), all images in the group can be manipulated at once.
•
To ungroup images so that they are displayed only as single still images, press the < n> button, choose [Group Images] on the [1] tab, and then choose [Off] (
24 ). However, grouped images cannot be ungrouped during
individual playback.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
90
Editing Face ID Information
If you notice that a name is incorrect during playback, you can change it or erase it.
However, you cannot add names for people who are not detected by Face
ID (names are not displayed), and for people whose names have been erased.
Changing Names
1
Access the setting screen.
z z n> button and choose
[Face ID Info] on the [
1] tab (
).
z z o><p> buttons or turn the
<
7> dial to choose [Edit ID Info], and then press the < m> button.
2
Choose an image.
z z
choose an image and press the < m> button.
z z selected face. When multiple names are displayed in an image, press the < q><r> buttons or turn the <
7> dial to choose the name to change, and then press the
< m> button.
Erasing Names
3
Choose the editing option.
z z o><p><q><r> buttons or turn the <
7> dial to choose [Overwrite], and then press the < m> button.
4
Choose the name of the person to overwrite with.
z z
the name of the person you want to overwrite with.
z z
91 ), choose [Erase] and press the
< m> button.
z z
< q><r> buttons or turn the <7> dial to choose [OK], and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
91
Image Viewing Options
Still Images
Magnifying Images
1
Magnify an image.
z z k> will zoom in and magnify the image. You can magnify images up to about 10x by continuing to hold the zoom lever.
z z toward < g>. You can return to singleimage display by continuing to hold it.
Approximate Position of
Displayed Area
2
Move the display position and switch images as needed.
z z
< o><p><q><r> buttons.
z z turn the <
7> dial.
•
You can return to single-image display from magnified display by pressing the
< n> button.
Still Images Movies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each image is displayed for about three seconds.
Choose a slideshow transition and start playback.
z z m> button, choose [.] in the menu, and choose the desired option
z z image] is displayed for a few seconds.
z z n> button to stop the slideshow.
•
The camera’s power-saving functions (
) are deactivated during slideshows.
•
To pause or resume slideshows, press the < m> button.
•
You can switch to other images during playback by pressing the < q><r> buttons or turning the <
7> dial. For fast-forward or fast-rewind, hold the
< q><r> buttons down.
•
In image search mode (
88 ), only images matching search conditions are
played.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
92
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions between images and the display duration of each image.
1
Access the setting screen.
z z n> button, and then choose [Slideshow] on the [
1] tab
(
).
2
Configure the settings.
z z z then choose the desired option (
).
To start the slideshow with your settings, choose [Start] and press the < m> button.
z z
< n> button.
•
[Play Time] cannot be modified when [Bubble] is chosen in [Effect].
Cover
Still Images
Auto Playback of Related Images
(Smart Shuffle)
Based on the current image, the camera offers four images that you may wish to view. After you choose to view one of those images, the camera offers four more images. This is an enjoyable way to play back images in an unexpected order. Try this feature after you have taken many shots, in many kinds of scenes.
1
Choose Smart Shuffle.
z z m> button, and then choose
[ ] in the menu (
).
z z
2
Choose an image.
z z o><p><q><r> buttons to choose the image you want to view next.
z z center, surrounded by the next four candidate images.
z z image, press the < m> button. To restore the original display, press the < m> button again.
z z n> button to restore single-image display.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
93
•
Only still images shot with this camera are played back using Smart
Shuffle.
•
Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
-
Images are shown in filtered display ( =
- During group playback (
)
Still Images Movies
Protecting Images
Protect important images to prevent accidental erasure by the camera
(
z z m> button, and then choose
[
:] in the menu (
). [Protected] is displayed.
z z and choose [
:] again, and then press the < m> button.
Using the Menu
1
Access the setting screen.
z z n> button and choose
[Protect] on the [
).
2
Choose a selection method.
z z
z z
< n> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
94
•
Protected images on a memory card will be erased if you format the card (
•
Protected images cannot be erased using the camera’s erasure function. To erase them this way, first cancel protection.
Choosing Images Individually
1
Choose [Select].
z z
(
), choose [Select] and press the
< m> button.
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button. [ ] is displayed.
z z m> button again. [ ] is no longer displayed.
z z images.
3
Protect the image.
z z n> button. A confirmation message is displayed.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
•
Images will not be protected if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
Selecting a Range
1
Choose [Select Range].
z z
94 ), choose [Select Range] and
press the < m> button.
2
Choose a starting image.
z z m> button.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
95
3
Choose an ending image.
z z r> button to choose [Last image], and then press the < m> button.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
z z selected as the last image.
4
Protect the images.
z z p> button to choose
[Protect], and then press the < m> button.
•
You can also choose the first or last image by turning the < 7> dial when the top screen in steps 2 and 3 is displayed.
Specifying All Images at Once
1
Choose [Select All Images].
z z
94 ), choose [Select All Images] and
press the < m> button.
2
Protect the images.
z z o><p> buttons or turn the
<
7> dial to choose [Protect], and then press the < m> button.
•
To cancel protection for groups of images, choose [Unlock] in step 2.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
96
Still Images Movies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (
) cannot be erased.
1
Choose an image to erase.
z z q><r> buttons or turn the
<
7> dial to choose an image.
2
Erase the image.
z z a> button.
z z
< q><r> buttons or turn the <7> dial to choose [Erase], and then press the < m> button.
z z z z q><r> buttons or turn the <
7> dial to choose
[Cancel], and then press the < m> button.
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when erasing images, because they cannot be recovered. However, protected images
(
Choosing a Selection Method
1
Access the setting screen.
z z n> button, and then choose [Erase] on the [
1] tab (
).
2
Choose a selection method.
z z
z z o><p> buttons or turn the
<
7> dial to choose a selection method, and then press the < m> button.
z z
< n> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
97
Choosing Images Individually
1
Choose [Select].
z z
Method” (
press the < m> button.
2
Choose an image.
z z step 2 in “Choosing Images Individually” z
(
), [ ] is displayed.
z m> button again. [ ] is no longer displayed.
z z images.
3
Erase the image.
z z n> button. A confirmation message is displayed.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
Selecting a Range
1
Choose [Select Range].
z z
Method” (
Range] and press the < m> button.
2
Choose images.
z z
3
Erase the images.
z z p> button to choose [Erase], and then press the < m> button.
Specifying All Images at Once
1
Choose [Select All Images].
z z
), choose [Select All
Images] and press the < m> button.
2
Erase the images.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
98
Still Images
Rotating Images
Change the orientation of images and save them as follows.
Movies
1
Choose [
\]. z z m> button, and then choose
[
\] in the menu (
).
2
Rotate the image.
z z q> or <r> button, depending on the desired direction. Each time you press the button, the image is rotated
90°. Press the < m> button to complete the setting.
Using the Menu
1
Choose [Rotate].
z z n> button and choose
[Rotate] on the [
1] tab (
).
2
Rotate the image.
z z q><r> buttons or turn the
<
7> dial to choose an image.
z z press the < m> button.
z z
< n> button.
•
Movies with an image quality of [ ] cannot be rotated.
•
Rotation is not possible when [Auto Rotate] is set to [Off] (
).
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates images based on the current camera orientation.
z z n> button, choose [Auto
Rotate] on the [
1] tab, and then choose
•
Images cannot be rotated (
99 ) when you set [Auto Rotate] to
[Off]. Additionally, images already rotated will be displayed in the original orientation.
•
93 ) mode, even if [Auto Rotate] is set to
[Off], images shot vertically will be displayed vertically, and rotated images will be displayed in the rotated orientation.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
99
Still Images
Tagging Images as Favorites
Movies
You can organize images by tagging them as favorites. By choosing a category in filtered playback, you can restrict the following operations to all of those images.
•
), Adding Images to the Print List
), Adding Images to a Photobook (
z z m> button, and then choose
[
z z z z and choose [ ] again, and then press the < m> button.
Using the Menu
1
Choose [Favorites].
z z n> button and choose
[Favorites] on the [
1] tab (
).
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button. [ ] is displayed.
z z m> button again. [ ] is no longer displayed.
z z images.
3
Finish the setup process.
z z n> button. A confirmation message is displayed.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
•
Images will not be tagged as favorites if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
•
Favorite images will have a three-star rating ( ) when transferred to computers running Windows 8, Windows 7, or Windows Vista. (Does not apply to movies.)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
100
Editing Still Images
•
–
104 ) is only available when the memory
card has sufficient free space.
Still Images
Resizing Images
Save a copy of images at a lower resolution.
1
Choose [Resize].
z z n> button and choose
[Resize] on the [
1] tab (
).
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
3
Choose an image size.
z z q><r> buttons or turn the
<
7> dial to choose the size, and then press the < m> button.
z z
Cover
4
Save the new image.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
z z
5
Review the new image.
z z n> button. [Display new image?] is displayed.
z z q><r> buttons or turn the
<
7> dial to choose [Yes], and then press the < m> button.
z z
•
Editing is not possible for images shot at a resolution of [ ]
] in step 3.
•
Images cannot be resized to a higher resolution.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
101
Still Images
Cropping
You can specify a portion of an image to save as a separate image file.
Cropping Area
Preview of Image After Cropping
Resolution After Cropping
1
Choose [Cropping].
z z n> button, and then choose [Cropping] on the [
1] tab
(
).
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
3
Adjust the cropping area.
z z the image to be cropped.
z z left, and a preview of the image as cropped is shown in the lower right.
z z lever.
z z
< o><p><q><r> buttons.
z z the < m> button.
z z enclosed in gray frames in the upper-left image. To crop the image based on this frame, turn the <
7> dial to switch to the other frame.
z z n> button.
4
Save as a new image and review.
z z
•
Editing is not possible for images shot at a resolution of [ ]
).
•
Images supported for cropping will have the same aspect ratio after cropping.
•
Cropped images will have a lower resolution than uncropped images.
•
If you crop still images shot using Face ID (
people left in the cropped image will remain.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
102
Still Images
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
file. For details on each option, see “Changing Image Color Tones (My
1
Choose [My Colors].
z z n> button, and then choose [My Colors] on the [
1] tab
(
).
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
3
Choose an option.
z z q><r> buttons or turn the
<
7> dial to choose an option, and then press the < m> button.
4
Save as a new image and review.
z z
(
).
•
Image quality of pictures you repeatedly edit this way will be a little lower each time, and you may not be able to obtain the desired color.
•
The color of images edited using this function may vary slightly from the color of images shot using My Colors (
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast is also automatically corrected, to make subjects stand out better. Choose from four correction levels, and then save the image as a separate file.
1
Choose [i-Contrast].
z z n> button, and then choose [i-Contrast] on the [
1] tab
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
3
Choose an option.
z z q><r> buttons or turn the
<
7> dial to choose an option, and then press the < m> button.
4
Save as a new image and review.
z z
•
For some images, correction may be inaccurate or may cause images to appear grainy.
•
Images may look grainy after repeated editing using this function.
•
If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
103
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the corrected image as a separate file.
1
Choose [Red-Eye Correction].
z z n> button, and then choose [Red-Eye Correction] on the [
1]
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image.
3
Correct the image.
z z m> button.
z z corrected, and frames are displayed around corrected image areas.
z z
Follow the steps in “Magnifying Images”
4
Save as a new image and review.
z z o><p><q><r> buttons or turn the <
7> dial to choose [New File], and then press the < m> button.
z z z z
•
Some images may not be corrected accurately.
•
To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
•
Protected images cannot be overwritten.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
104
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1
Choose [
*]. z z
(
), choose [
*] and press the
< m> button.
z z are now displayed.
Movie Editing Panel
Movie Editing Bar
2
Specify portions to cut.
z z o><p> buttons to choose
[ ] or [ ].
z z
(identified by [ ] on the screen), press the < q><r> buttons or turn the <7> dial to move [ ]. Cut the beginning of the movie (from [ ]) by choosing [ ], and cut the end of the movie by choosing
[ ].
z z
[ ] mark, in [ ] the portion before the nearest [ ] mark on the left will be cut, while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
3
Review the edited movie.
z z o><p> buttons to choose
[ ], and then press the < m> button.
The edited movie is now played.
z z z z o><p> buttons to choose [ ]. Press the < m> button, choose [OK] (either press the
< q><r> buttons or turn the <7> dial), and then press the < m> button again.
4
Save the edited movie.
z z o><p> buttons to choose
[ ], and then press the < m> button.
z z o><p><q><r> buttons or turn the <
7> dial to choose [New File], and then press the < m> button.
z z
•
To overwrite the original movie with the cut one, choose [Overwrite] in step 4. In this case, the original movie will be erased.
•
If the memory card lacks sufficient space, only [Overwrite] will be available.
•
Movies may not be saved if the battery pack runs out while saving is in progress.
•
When editing movies, you should use a fully charged battery pack or an AC adapter kit (sold separately,
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
9
10
7
8
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
105
7
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services
What You Can Do with Wi-Fi .........................
Preparing to Share Images via Wi-Fi ............
Uploading Images to Web Services ....................
Sending Images to a Smartphone .......................
Sending Images to Another Camera ...................
Sending Images to a Computer ..........................
Printing Images Wirelessly ..................................
Registering Web Services .............................
Registering CANON iMAGE GATEWAY .............
Registering Other Web Services ..........................
Installing CameraWindow on a Smartphone ................................................
Preparing to Register a Computer ................
Checking Your Computer Environment ...............
Installing the Software .........................................
Configuring the Computer for a Wi-Fi Connection (Windows Only) ...................
Accessing the Wi-Fi Menu .............................
Initial Connection via Wi-Fi ..................................
After the Initial Wi-Fi Connection .........................
Connecting via an Access Point ...................
Confirming Access Point Compatibility ................
Connecting to WPS-Compatible Access
Points ..................................................................
Connecting to Access Points in the List ..............
Connecting without an Access Point ...........
Previous Access Points .......................................
Connecting to Another Camera ....................
Sending Images ..............................................
Sending Images Individually ...............................
Sending Multiple Images .....................................
Adding Comments ...............................................
Saving Images to a Computer .......................
(Image Sync) .................................................
Initial Preparations ..............................................
Sending Images ..................................................
Geotagging Images on the Camera ..............
Editing or Erasing Wi-Fi Settings .................
Editing Connection Information ...........................
Returning the Wi-Fi Settings to Default ...............
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
106
What You Can Do with Wi-Fi
This camera is an approved Wi-Fi ® * product. You can wirelessly connect to and send images to the following devices and services.
Note that, in this chapter, wireless LAN functions other than Wi-Fi may be referred to as Wi-Fi.
*
Wi-Fi is a brand name that indicates interoperability certification of wireless
LAN devices.
Connecting to Web Services
Images can be sent to social network services and other Web services via CANON iMAGE GATEWAY*. Unsent images on the camera can also be sent automatically to a computer or
Web service via CANON iMAGE GATEWAY.
* CANON iMAGE GATEWAY is an online photo service available to those who have purchased this product.
Connecting to a Smartphone
Send images to smartphones and tablet computers that have Wi-Fi functions. You can also geotag your shots from a connected smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other compatible devices are collectively referred to as
“smartphones”.
Connecting to Another Camera
Use the Wi-Fi function to send images between Canon-brand, compact digital cameras.
Cover
Connecting to a Computer
Use the software to wirelessly send images from the camera to a computer.
Before Use
Common Camera
Operations
Basic Guide
Connecting to a Printer
Send images wirelessly to a PictBridge-compatible printer
(supporting DPS over IP) to print them.
•
Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN)
180 ) and “Security Precautions” (
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
107
Preparing to Share Images via Wi-Fi
Sending images via Wi-Fi requires some initial preparation on the camera and target devices. Preparations and methods of sending images vary depending on the destination.
Note that before using Wi-Fi (
), you will need to register a camera
nickname on the camera.
Uploading Images to Web Services
SNS, videosharing sites, e-mail
CANON iMAGE GATEWAY
Access point
Camera
Computer or smartphone browsers
Register Web services (
)
)*
* You can send images to a computer or Web service (
Sending Images to a Smartphone
Internet
CameraWindow
Camera
Smartphone
Tablet computer
Access point
Install CameraWindow on a smartphone (
) or via an access point (
)
Sending Images to Another Camera
Camera Camera
)
Send images (
)
Sending Images to a Computer
Internet
CameraWindow
Access point
Camera
Computer
Check your computer environment (
Install CameraWindow on a computer (
Configure the computer for a Wi-Fi connection (Windows only,
Connect via an access point (
Save images to a computer (
Printing Images Wirelessly
Camera Printer
Access point
Connect directly (
)
)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
108
Registering Web Services
Use a smartphone or computer to add to the camera Web services that you want to use.
•
A smartphone or computer with a browser and Internet connection is required to complete camera settings for CANON iMAGE GATEWAY and other Web services.
•
Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and version information.
•
For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.com/ cig/).
•
You must have an account with Web services other than CANON iMAGE
GATEWAY if you desire to use them. For further details, check the websites for each Web service you want to register.
•
Separate ISP connection and access point fees may be applicable.
Registering CANON iMAGE GATEWAY
After linking the camera and CANON iMAGE GATEWAY, add CANON iMAGE GATEWAY as a destination Web service on the camera.
1
Log in to CANON iMAGE
GATEWAY and access the camera settings page.
z z http://www.canon.com/cig/ and visit the
CANON iMAGE GATEWAY site for your region.
z z z z enter your user name and password to log in. If you do not have a CANON iMAGE GATEWAY account, follow the instructions to complete member registration (free of charge).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
109
2
Choose your camera model.
z z
] is displayed in the Wi-Fi menu.
z z displayed for entering the authentication code. On this page in step 9, you will enter the authentication code displayed on the camera after steps 3 – 8.
3
Access the Wi-Fi menu.
z z
(
4
Choose [ ].
z z o><p><q><r> buttons or turn the <
7> dial to choose [ then press the < m> button.
], and
5
Establish a connection with the access point.
z z q><r> buttons or turn the
<
7> dial to choose [Authenticate], and then press the < m> button.
Cover
6
Choose an access point.
z z o><p> buttons or turn the
<
7> dial to choose a network (access point), and then press the < m> button.
Before Use
Common Camera
Operations
Basic Guide
7
Enter the access point password.
z z m> button to access the keyboard, and then enter the password z
z o><p> buttons or turn the
<
7> dial to choose [Next], and then press the < m> button.
8
Choose [Auto] and establish the connection.
z z o><p> buttons or turn the
<
7> dial to choose [Auto], and then press the < m> button.
z z iMAGE GATEWAY via the access point, an authentication code is displayed.
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
110
9
Enter the authentication code.
z z the authentication code displayed on the camera and go to the next step.
z z displayed.
10
Check the confirmation numbers and complete the setup process.
z z the camera matches the number on the smartphone or computer.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
z z smartphone or computer.
z z
]
(
and CANON iMAGE
GATEWAY are now added as destinations, and the [ to [ ].
] icon changes z z smartphone or computer to indicate that this process is finished. To add other
Web services, follow the procedure
in “Registering Other Web Services”
•
You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 6 – 8 in “Connecting to WPS-
).
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the camera. Note that CANON iMAGE GATEWAY must be registered on the camera first (
1
Access the Web service settings screen.
z z
to CANON iMAGE GATEWAY, and then access the Web service settings screen.
2
Configure the Web service you want to use.
z z smartphone or computer to set up the
Web service.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
111
3
Choose [ ].
z z
), choose [ ] (either press the
< o><p><q><r> buttons or turn the
<
7> dial), and then press the <m> button.
z z updated.
•
If any configured settings change, follow these steps again to update the camera settings.
Cover
Installing CameraWindow on a
Smartphone
Before connecting your camera to a smartphone, first install the free dedicated application, CameraWindow, on your smartphone.
Before Use
Common Camera
Operations
Basic Guide
1
Connect the smartphone to a network.
2
Install CameraWindow.
z z download and install CameraWindow from the App Store.
z z install CameraWindow from Google Play.
z z to establish a connection with the smartphone (
•
For details on this application (supported smartphones and included functions), refer to the Canon website.
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
112
Preparing to Register a Computer
Prepare to register a computer. To save images to the computer wirelessly, you must install CameraWindow.
Checking Your Computer Environment
The camera can connect via Wi-Fi to computers running the following operating systems. For detailed system requirements and compatibility information, including support in new operating systems, visit the Canon website.
Windows
Operating
System
Windows 8
Windows 7 SP1
Macintosh
Mac OS X 10.6.8
Mac OS X 10.7
Mac OS X 10.8.2 or later
•
Windows 7 Starter and Home Basic editions are not supported.
•
Windows 7 N (European version) and KN (South Korean version) require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Installing the Software
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
1
Download the software.
z z
Internet, access http://www.canon.com/ icpd/.
z z z z
2
Install the software.
z z on-screen instructions to complete the installation process.
z z depending on computer performance and the Internet connection.
z z after installation.
•
Using the software, you can update to the latest version, and download new functions via the Internet (some software excluded).
•
The first time you connect the camera to the computer, drivers will be installed, so it may take a few minutes until camera images are accessible.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
113
Configuring the Computer for a Wi-Fi
Connection (Windows Only)
On a computer running Windows, configure the following settings before connecting the camera to the computer wirelessly.
1
Confirm that the computer is connected to the access point.
z z connection, refer to the computer user manual.
2
Configure the setting.
z z
► [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [Wi-Fi connection setup].
z z on-screen instructions and configure the setting.
•
The following Windows settings are configured when you run the utility in step 2.
- Turn on media streaming.
This will enable the camera to see (find) the computer to access via Wi-Fi.
- Turn on network discovery.
This will enable the computer to see (find) the camera.
- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
•
Some security software may prevent you from completing the settings as described here. Check the settings of your security software.
Accessing the Wi-Fi Menu
Initial Connection via Wi-Fi
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi.
1
Access the Wi-Fi menu.
z z 1> button to turn the camera on.
z z o> button.
2
Enter a nickname.
z z m> button to access the keyboard, and then enter a nickname
z z z z o><p> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
z z
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
114
•
When connecting wirelessly to any device other than a computer, a memory card must be inserted in the camera. Additionally, the memory card must contain images in order for you to access Web services or connect to a smartphone or printer wirelessly.
•
To change the camera’s nickname, choose [Wi-Fi Settings] on the [
3] tab, and then choose [Change Device Nickname].
•
If the Wi-Fi menu is not displayed but only the information changes when you press the < o> button, first press the <p> button to switch from detailed
).
•
Nicknames beginning with a space cannot be entered in step 2. If you attempt to do this and press the < n> button on the keyboard screen, a message will be displayed. Press the < m> button to access the keyboard, and then enter a new nickname.
After the Initial Wi-Fi Connection
•
Once you have connected to devices via Wi-Fi, recent destinations will be listed first when you access the Wi-Fi menu by pressing the < o> button. You can easily connect again by pressing the < o><p> buttons to choose the device name and then pressing the < m> button.
•
To add a new device, display the device selection screen by pressing the
< q><r> buttons, and then configure the setting.
•
If you prefer not to display recent target devices, press the < n> button, and on the [
3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
Connecting via an Access Point
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Specifications” (
If you are already using Wi-Fi, confirm the following items. For instructions on checking network settings, refer to the access point user manual.
•
If system administrator status is needed to adjust network settings, contact the system administrator for details.
•
These settings are very important for network security. Exercise adequate caution when changing these settings.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
115
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Also called the “access point name” or “network name”.
Network authentication / data encryption
(encryption method / encryption mode)
The method for encrypting data during wireless transmission.
○ None
○ WEP (open system authentication)
○ WPA-PSK (TKIP)
○ WPA-PSK (AES)
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
Password (encryption key / network key)
The key used when encrypting data during wireless transmission. Also called the “encryption key” or “network key”.
Key index (transmit key)
The key set when WEP is used for network authentication / data encryption.
○ 1
Connection methods vary depending on whether the access point supports
Wi-Fi Protected Setup (WPS) or not. Refer to the user manual provided with your access point to check if it supports WPS.
•
A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
•
This guide refers to all Wi-Fi routers and base stations as “access points”.
•
If you use MAC address filtering on your Wi-Fi network, be sure to add the camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing the [
3] tab, [Wi-Fi Settings], and then [Check MAC
Address].
Connecting to WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices over Wi-
Fi. You can use either Push Button Configuration Method or PIN Method for settings on a WPS supported device.
1
Confirm that the target device is connected to the access point.
z z to Web services.
z z connection, refer to the device and access point user manuals.
2
Access the Wi-Fi menu
(
3
Choose the target device.
z z the < o><p><q><r> buttons or turn the <
7> dial), and then press the <m> button.
z z z z
].
z z 2].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
116
z z the service icon. If multiple recipients or sharing options are used with a Web service, choose the desired item on the
[Select Recipient] screen (either press the < o><p> buttons or turn the <7> dial), and then press the < m> button.
4
Choose [Add a Device].
z z o><p> buttons or turn the
<
7> dial to choose [Add a Device], and then press the < m> button.
5
To connect to a smartphone or printer:
Choose [Switch Network].
z z
), choose
[Switch Network] (either press the
< o><p><q><r> buttons or turn the
<
7> dial), and then press the <m> button.
6
Choose [WPS Connection].
z z o><p> buttons or turn the
<
7> dial to choose [WPS Connection], and then press the < m> button.
7
Choose [PBC Method].
z z o><p> buttons or turn the
<
7> dial to choose [PBC Method], and then press the < m> button.
8
Establish the connection.
z z connection button for a few seconds.
z z m> button.
z z point.
z z 2], or [ ] in step 3, devices connected to the access point are listed on the [Select a Device] screen displayed next.
z z step 3, go to step 11.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
117
9
To connect to a smartphone, printer, or computer:
Choose the target device.
z z o><p> buttons or turn the
<
7> dial to choose the computer name, and then press the < m> button.
z z printer, or Macintosh computer, go to step 11.
10
If you have selected a computer running Windows in step 9 for the first time:
Install a driver.
z z the camera, click the Start menu on the computer, click [Control Panel], and then click [Add a device].
z z z z z z the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen.
11
Send or print the images.
z z are connected varies depending on the target device.
z z smartphone or Web service, an image transfer screen is displayed.
z z
z z computer, the camera screen is blank.
Follow the steps in “Saving Images to a
the computer.
z z printer, you can print by following the same steps as for printing via USB. For
details, see “Printing Images” (
•
If you chose [PIN Method] in step 7, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user manual included with your access point.
•
To add multiple destinations, repeat this procedure from the first step.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
118
Previous Access Points
You can reconnect to any previous access points automatically by following step 4 in “Connecting to WPS-Compatible Access Points” (
•
To reconnect to the access point, confirm that the target device is already connected to it, and then follow the procedure from step 9. Note that this step is not required when connecting to Web services.
•
To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then follow the procedure from step 6.
Connecting to Access Points in the List
1
View the listed access points.
z z points) as described in steps 1 – 5 of
“Connecting to WPS-Compatible Access
Points” (
).
2
Choose an access point.
z z o><p> buttons or turn the
<
7> dial to choose a network (access point), and then press the < m> button.
3
Enter the access point password.
z z m> button to access the keyboard, and then enter the password
z z o><p> buttons or turn the
<
7> dial to choose [Next], and then press the < m> button.
4
Choose [Auto].
z z o><p> buttons or turn the
<
7> dial to choose [Auto], and then press the < m> button.
z z 2], or [ ] as the target device, see “Connecting to WPS-
Compatible Access Points”, starting with step 9 (
z z destination, see “Connecting to WPS-
Compatible Access Points”, starting with
).
•
To determine the access point password, check on the access point itself or refer to the user manual.
•
Up to 16 access points will be displayed. If no access points are detected, choose [Manual Settings] in step 2 to manually set an access point. Follow onscreen instructions and enter an SSID, security settings, and a password.
•
When you use an access point that you have already connected to for connecting to another device, [*] is displayed for the password in step 3. To use the same password, choose [Next] (either press the < o><p> buttons or turn the <
7> dial) and press the <m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
119
Connecting without an Access Point
When connecting to a smartphone or printer via Wi-Fi, you can use the camera as an access point (Camera Access Point mode) instead of using another access point.
Similarly, no access point is used in camera-to-camera connections
(
).
1
Access the Wi-Fi menu
).
2
Choose the target device.
z z the < o><p><q><r> buttons or turn the <
7> dial), and then press the <m> button.
z z z z 2].
3
Choose [Add a Device].
z z o><p> buttons or turn the
<
7> dial to choose [Add a Device], and then press the < m> button.
Cover
z z
Before Use
Common Camera
Operations
Basic Guide
4
On the target device, connect to the network identified on the camera.
z z setting menu, choose the SSID (network name) displayed on the camera.
5
For a smartphone connection:
Start CameraWindow on the smartphone.
z z up, register a smartphone nickname for display on the camera.
z z the camera, the device connection screen will be displayed on the camera.
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
120
6
Choose the target device.
z z press the < o><p> buttons or turn the
<
7> dial), and then press the <m> button.
7
For a smartphone connection:
Adjust the privacy setting.
z z q><r> buttons or turn the
<
7> dial to choose [Yes], and then press the < m> button.
z z receive images sent from the camera, or to geotag images on the camera
(
).
8
Send or print the images.
z z are connected varies depending on the target device.
z z smartphone, an image transfer screen is displayed.
z z
z z printer, you can print by following the same steps as for printing via USB. For
details, see “Printing Images” (
•
All images in the camera can be viewed from the connected smartphone when you choose [Yes] in step 7. To keep camera images private, so that they cannot be viewed from the smartphone, choose [No] in step 7.
•
To change privacy settings for smartphones added to the list, choose the smartphone whose settings you want to change from
[Edit a Device] in step 3, and then choose [View Settings].
•
To add multiple devices, repeat this procedure from the first step.
•
For better security, you can require password input on the screen in step 3 by accessing MENU and choosing [
3] tab > [Wi-Fi Settings] > [Password] > [On].
In this case, in the password field on the device in step 4, enter the password displayed on the camera.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
121
Previous Access Points
You can reconnect to any previous access points automatically by following step 3 in “Connecting without an Access Point” (
).
•
To use the camera as an access point, choose [Switch Network] on the screen displayed when you establish a connection, and then choose [Set
Camera As Access Point].
•
When reconnecting via a previous access point, connect the target device to the access point in step 4.
•
To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then follow the procedure in “Connecting to WPS-Compatible Access Points” from step
6 (
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
•
Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this camera.
1
Access the Wi-Fi menu
(
2
Choose camera.
z z o><p><q><r> buttons or turn the <
7> dial to choose [4], and then press the < m> button.
3
Choose [Add a Device].
z z o><p> buttons or turn the
<
7> dial to choose [Add a Device], and then press the < m> button.
z z too.
z z added when [Start connection on target camera] is displayed on both camera screens.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
122
z z successfully, the image transfer screen will be displayed. Proceed to “Sending
).
•
To add multiple cameras, repeat the above procedures starting from step 1.
•
Once a camera is added, the camera name will be displayed on the screen in step 3. To connect to a camera again, simply choose the camera name from the list.
Sending Images
Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used
).
Sending Images Individually
1
Choose an image.
z z
7> dial to choose an image to send.
2
Send the image.
z z q><r> buttons to choose
[Send this image], and then press the
< m> button.
z z terms of service, choose [I Agree], and press the < m> button.
z z darkens during image transfer.
z z service, [OK] is displayed. Press the
< m> button to return to the playback screen.
z z smartphone, [Transfer completed] will be displayed, and the display will return to the image transfer screen.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
123
•
Keep your fingers or other objects off the Wi-Fi antenna area (
).
Covering this may decrease the speed of your image transfers.
•
Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level.
•
When sending movies to smartphones, note that the supported image quality varies depending on the smartphone. For details, refer to the smartphone user manual.
•
To disconnect from the camera, press the < n> button, choose [OK] on the confirmation screen (either press the < q><r> buttons or turn the <7> dial), and then press the < m> button. You can also use the smartphone to end the connection.
•
On the screen, wireless signal strength is indicated by the following icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
•
Sending images to Web services will take less time when resending images you have already sent that are still on the CANON iMAGE GATEWAY server.
Choosing the Image Resolution (Size)
On the image transfer screen, choose [ ] by pressing the < o><p> buttons, and then press the < m> button. On the next screen, choose the resolution by pressing the < o><p> buttons, and then press the <m> button.
•
To send images at original size, select [No] as the resizing option.
•
Choosing [ ] or [ ] will resize images that are larger than the selected size before sending.
•
Movies cannot be resized.
Sending Multiple Images
1
Choose [Select and send].
z z q><r> buttons to choose
[Select and send], and then press the
< m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
2
Choose images.
z z o><p><q><r> buttons to choose an image to send, and then press the < m> button. [ ] is displayed.
z z m> button again. [ ] is no longer displayed.
z z images.
z z the < n> button.
3
Send the images.
z z q><r> buttons or turn the
<
7> dial to choose [Send], and then press the < m> button.
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
124
•
Up to 50 images can be sent together at once. You can send movies together as long as the total playback time is within two minutes.
•
Web services may limit the number of images you can send. For details, refer to the Web service you are using.
•
You can also choose images in step 2 by moving the zoom lever twice toward
< k> to access single-image display and then pressing the <q><r> buttons or turning the <
7> dial.
•
In step 3, you can choose the desired resolution (size) of your images before
).
Adding Comments
Using the camera, you can add comments (alphanumeric characters and symbols) to images that you send to e-mail addresses, social networking services, etc. The number of characters and symbols that can be entered may differ depending on the Web service.
1
Access the screen for adding comments.
z z o><p><q><r> buttons to choose [ ], and then press the < m> button.
2
Add a comment (
3
Send the image.
z z
•
When a comment is not entered, the comment set in CANON iMAGE
GATEWAY is automatically sent.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
125
Saving Images to a Computer
When sending images to a computer, use the computer instead of the camera.
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some software excluded).
1
Display CameraWindow.
z z clicking [Downloads Images From Canon
Camera].
z z
CameraWindow is automatically displayed when a Wi-Fi connection is established between the camera and computer.
2
Import images.
z z then click [Import Untransferred Images].
z z folder on the computer, in separate folders named by date.
z z after image import is complete. For instructions on viewing images on a computer, refer to “Software Instruction
).
•
Movies will take longer to import since the file size is larger than still images.
•
To disconnect from the camera, turn off the camera.
•
You can also specify to save all images or only selected images to the computer, and you can change the destination folder. Refer to “Software
•
In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in the taskbar.
•
On a Macintosh computer, if CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
•
Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply.
- It may take a few minutes after you connect the camera to the computer until camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information, depending on the operating system version, the software in use, or image file sizes.
- Some functions provided by the software may not be available, such as movie editing.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
126
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred already can be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Install and configure the software on the destination computer.
1
Install the software.
z z
).
2
Register the camera.
z z
], and then click [Add new camera].
z z
], and then click [Add new camera].
z z the cameras listed, which are linked to
).
z z to receive images, the icon changes to
[ ].
3
Choose the type of images to send (only when sending movies with images).
z z n> button, and then choose [Wi-Fi Settings] on the [
3] tab
z z o><p> buttons to choose
[Image Sync], and then press the
< q><r> buttons to choose [Stills/
Movies].
•
To choose a Web service as the destination, follow the steps in “Registering
111 ) to update the camera settings.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
127
Sending Images
Images sent from the camera are automatically saved to the computer. If the computer that you intend to send images to is turned off, the images will be stored temporarily on the CANON iMAGE GATEWAY server. Stored images are regularly erased, so make sure to turn on the computer and save the images.
z z
choose [ ].
z z images are sent. z z successfully to the CANON iMAGE
GATEWAY server, [ ] is displayed on the screen.
z z computer when you turn it on.
z z services from the CANON iMAGE
GATEWAY server, even if the computer is off.
•
When sending images, you should use a fully charged battery pack
or an AC adapter kit (sold separately,
).
•
Even if images were imported to the computer through a different method, any images not sent to the computer via CANON iMAGE GATEWAY will be sent to the computer.
•
Sending is faster when the destination is a computer on the same network as the camera, because images are sent via the access point instead of
CANON iMAGE GATEWAY. Note that images stored on the computer are sent to CANON iMAGE GATEWAY, so the computer must be connected to the
Internet.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
128
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated CameraWindow
) can be added to images on the camera. Images are tagged with information including the latitude, longitude, and elevation.
•
Before shooting, make sure the date and time and your home time
zone are set correctly. (See “Setting the Date and Time” (
Additionally, in [Time Zone] (
), specify any shooting destinations that are in other time zones.
•
The smartphone you will use for geotagging must be authorized to view the images on the camera (
).
•
Others may be able to locate or identify you by using location data in your geotagged still images or movies. Be careful when sharing these images with others, as when posting images online where many others can view them.
Editing or Erasing Wi-Fi Settings
Edit or erase Wi-Fi settings as follows.
Editing Connection Information
1
Access the Wi-Fi menu
(
2
Choose a device to edit.
z z o><p><q><r> buttons or turn the <
7> dial to choose the icon of the device to edit, and then press the
< m> button.
3
Choose [Edit a Device].
z z o><p> buttons or turn the
<
7> dial to choose [Edit a Device], and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
129
Configurable Items
[View Settings] (
)
4
Choose a device to edit.
z z o><p> buttons or turn the
<
7> dial to choose the device to edit, and then press the < m> button.
5
Choose an item to edit.
z z o><p> buttons or turn the
<
7> dial to choose an item to edit, and then press the < m> button.
z z what device or service the camera will access.
4
O
–
O
Connection
O
– c
O
–
Web
Services
–
O
O –
O O O
–
O
: Configurable – : Not configurable
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on the camera.
z z
Device Nickname] and press the < m> button.
z z m> button. Use the keyboard displayed to
Erasing Connection Information
Erase connection information (information about devices that you have connected to) as follows.
z z
Connection Info] and press the < m> button.
z z
< q><r> buttons or turn the <7> dial to choose [OK], and then press the < m> button.
z z erased.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
130
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the camera to another person, or dispose of it.
1
Choose [Wi-Fi Settings].
z z n> button, and then choose [Wi-Fi Settings] on the [
3] tab
(
).
2
Choose [Reset Settings].
z z o><p> buttons or turn the
<
7> dial to choose [Reset Settings], and then press the < m> button.
3
Restore the default settings.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
z z
•
Resetting the Wi-Fi settings will also clear all Web service settings. Be sure that you want to reset all Wi-Fi settings before using this option.
•
To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the
[
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
131
8
Setting Menu
Customize or adjust basic camera functions for greater convenience
Adjusting Basic Camera Functions ..............
Silencing Camera Operations .............................
Adjusting the Volume ..........................................
Customizing Sounds ...........................................
Hiding Hints and Tips ..........................................
Date and Time .....................................................
World Clock .........................................................
Lens Retraction Timing .......................................
Using Eco Mode ..................................................
Power-Saving Adjustment ...................................
Screen Brightness ...............................................
Start-up Screen ...................................................
Formatting Memory Cards ..................................
File Numbering ....................................................
Date-Based Image Storage .................................
Metric / Non-Metric Display .................................
Checking Certification Logos ..............................
Display Language ...............................................
Adjusting Other Settings .....................................
Restoring Defaults ...............................................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
132
Adjusting Basic Camera Functions
Functions can be configured on the [
3] tab. Customize commonly used
functions as desired, for greater convenience (
Silencing Camera Operations
Silence camera sounds and movies as follows.
z z
•
Operation can also be silenced by holding down the < p> button as you turn the camera on.
•
Sound is not played during movies (
85 ) if you mute camera sounds. To
restore sound during movies, press the < o> button. Adjust volume with the
< o><p> buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
z z
< m> button.
z z
< q><r> buttons to adjust the volume.
•
The default shutter sound is used in [
), regardless of any changes to [Shutter Sound].
Customizing Sounds
Customize camera operating sounds as follows.
z z the < m> button.
z z
< q><r> buttons to choose an option.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
133
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. (
) or
MENU (
) items. If you prefer, you can deactivate this information.
z z
[Off].
Date and Time
Adjust the date and time as follows.
z z
< m> button.
z z q><r> buttons to choose an option, and then adjust the setting, either by pressing the < o><p> buttons or turning the <
7> dial.
World Clock
To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (
Cover
1
Specify your destination.
z z
< m> button.
z z o><p> buttons or turn the
<
7> dial to choose [ World], and then press the < m> button.
z z q><r> buttons or turn the z
<
7> dial to choose the destination.
To set daylight saving time (1 hour ahead), press the < o><p> buttons to choose [ ].
z z m> button.
2
Switch to the destination time zone.
z z o><p> buttons or turn the
<
7> dial to choose [ World], and then press the < n> button.
z z
] is now shown on the shooting screen
•
Adjusting the date or time while in [ ] mode (
update your [ Home] time and date.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
134
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press the <
1> button in Shooting mode (
). To have the lens retracted immediately after you press the <
1> button, set the retraction timing to
[0 sec.].
z z
[0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption.
1
Configure the setting.
z z
[On].
z z
] is now shown on the shooting z
).
The screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off.
The camera turns off after approximately three minutes of inactivity.
2
Shoot.
z z shooting when the screen is off but the lens is still out, press the shutter button halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (
).
z z z the < m> button.
After choosing an item, press the
< q><r> buttons to adjust it as needed.
•
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
•
The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
•
These power-saving functions are not available when you have set Eco mode
(
) to [On].
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
135
Screen Brightness
Adjust screen brightness as follows.
z z press the < q><r> buttons to adjust the brightness.
•
For maximum brightness, press and hold the < p> button for at least one second when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the [
3] tab.) To restore the original brightness, press and hold the < p> button again for at least one second or restart the camera.
Cover
Start-up Screen
Customize the start-up screen shown after you turn the camera on as follows.
Before Use
Common Camera
Operations
Basic Guide
z z the < m> button.
z z q><r> buttons or turn the
<
7> dial to choose an option.
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up.
1
Access the [Format] screen.
z z
< m> button.
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
136
2
Choose [OK].
z z o><p> buttons to choose
[Cancel], choose [OK] (either press the
< q><r> buttons or turn the <7> dial), and then press the < m> button.
3
Format the memory card.
z z the < o><p> buttons or turn the <7> dial to choose [OK], and then press the
< m> button.
z z card formatting complete] is displayed.
Press the < m> button.
•
Formatting or erasing data on a memory card only changes file management information on the card and does not erase the data completely. When transferring or disposing of memory cards, take steps to protect personal information if necessary, as by physically destroying cards.
•
The total card capacity indicated on the formatting screen may be less than the advertised capacity.
Cover
Low-Level Formatting
Perform low-level formatting in these cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level formatting, copy images on the memory card to a computer, or take other steps to back them up.
z z
Memory Cards” (
< o><p> buttons or turn the <7> dial to choose [Low Level Format], and then press the < q><r> buttons to select this option. A [ ] icon is displayed.
z z
Cards” (
formatting process.
•
Low-level formatting takes longer than “Formatting Memory Cards” (
because data is erased from all storage regions of the memory card.
•
You can cancel low-level formatting in progress by choosing [Stop]. In this case, all data will be erased, but the memory card can be used normally.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
137
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers.
z z choose an option.
Continuous
Auto Reset
Images are numbered consecutively (until the 9999th shot is taken/ saved) even if you switch memory cards.
Image numbering is reset to 0001 if you switch memory cards, or when a new folder is created.
•
Regardless of the option selected in this setting, shots may be numbered consecutively after the last number of existing images on newly inserted memory cards. To start saving shots from 0001, use an empty (or formatted
•
Refer to “Software Instruction Manual” (
) for information on the card folder structure and image formats.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day.
z z
[Daily].
z z created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in the zoom bar (
indicator (
), and elsewhere from m/cm to ft/in as needed.
z z
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
138
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body.
z z then press the < m> button.
Display Language
Change the display language as needed.
z z
], and then press z the < m> button.
z o><p><q><r> buttons or turn the <
7> dial to choose a language, and then press the < m> button.
•
You can also access the [Language] screen in Playback mode by pressing and holding the < m> button and immediately pressing the <n> button.
Adjusting Other Settings
The following settings can also be adjusted on the [
3] tab.
•
)
•
[Ctrl via HDMI] (
•
Restoring Defaults
If you accidentally change a setting, you can restore default camera settings.
1
Access the [Reset All] screen.
z z
< m> button.
2
Restore default settings.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
z z
•
The following functions are not restored to default settings.
- Information registered using Face ID (
)
- [
3] tab settings [Date/Time] ( =
] (
), [Time
Zone] (
)
- Custom white balance data you have recorded (
-
Colors chosen in Color Accent (
-
)
- Wi-Fi settings (
)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
5
6
9
10
Tv, Av, and M
Mode
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
Accessories
Appendix
Index
139
9
Accessories
Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately
System Map ....................................................
Optional Accessories.....................................
Power Supplies ...................................................
Flash Unit ............................................................
Other Accessories ...............................................
Printers ................................................................
Using Optional Accessories..........................
Playback on a TV ................................................
Powering the Camera with Household Power .....
Using the Software .........................................
Software ..............................................................
Computer Connections via a Cable ....................
Saving Images to a Computer .............................
Printing Images ..............................................
Easy Print ............................................................
Configuring Print Settings ...................................
Printing Movie Scenes ........................................
Adding Images to the Print List (DPOF) ..............
Adding Images to a Photobook ...........................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
140
System Map
Included Accessories
Wrist Strap
Battery Pack
NB-6LH*
1
Battery Charger
CB-2LY/CB-2LYE*
1
USB Cable (camera end: Mini-B)*
2
Power
AC Adapter Kit
ACK-DC40
Memory Card Card Reader
Cables
Windows/Macintosh
Computer
HDMI Cable HTC-100
TV/Video
System
Stereo AV Cable AVC-DC400ST
Flash Unit
Canon-Brand PictBridge-
Compatible Printers
High-Power Flash
HF-DC2
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.
Note that availability varies by area, and some accessories may no longer be available.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
141
Optional Accessories
The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-6LH
z z
Battery Charger CB-2LY/CB-2LYE/
CB-2LYT
z z
AC Adapter Kit ACK-DC40
z z household power. Recommended when using the camera over extended periods, or when connecting the camera to a printer or computer. Cannot be used to charge the battery pack in the camera.
•
The battery pack includes a convenient cover which you can attach to know the charging status at a glance. Attach the cover so that
is visible on a charged battery pack, and attach it so that
is not visible on an uncharged battery pack.
•
Battery Charger CB-2LYE is also supported.
•
Battery Pack NB-6L is also supported.
•
The battery charger and AC adapter kit can be used in areas with
100 – 240 V AC power (50/60 Hz).
•
For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.
Flash Unit
High-Power Flash HF-DC2
z z that are out of range of the built-in flash.
Other Accessories
Interface Cable IFC-400PCU
z z or printer.
Stereo AV Cable AVC-DC400ST
z z playback on the larger TV screen.
HDMI Cable HTC-100
z z input of a high-definition TV.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
142
Printers
Canon-Brand PictBridge-
Compatible Printers
z z possible by connecting the camera to a Canon-brand PictBridge-compatible printer.
For details, visit your nearest Canon retailer.
Still Images
Using Optional Accessories
Movies
Still Images Movies
Playback on a TV
By connecting the camera to a TV, you can view your shots on the larger screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
•
Some information may not be displayed on the TV (
Note that when the camera is connected to a TV, nothing is displayed on the camera screen. Watch the TV screen as you control the camera.
Still Images Movies
Playback on a High-Definition TV
Connecting the camera to an HDTV with the HDMI Cable HTC-100 (sold separately) enables you to view your shots on the larger screen of the TV.
Movies shot at a resolution of [
] can be viewed in high definition.
1
Make sure the camera and TV are off.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
143
2
Connect the camera to the TV.
z z the HDMI input as shown.
z z and insert the cable plug fully into the camera terminal.
3
Turn the TV on and switch to video input.
z z connected the cable to in step 2.
4
Turn the camera on.
z z
1> button to turn the camera on.
z z displayed on the TV. (Nothing is displayed on the camera screen.) z z
TV before disconnecting the cable.
•
Camera operating sounds are not played while the camera is connected to an
HDTV.
Still Images Movies
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
Depending on the TV, you may need to adjust some TV settings. For details, refer to the TV manual.
1
Configure the setting.
z z n> button, choose
[Ctrl via HDMI] on the [
3] tab, and then choose [Enable] (
).
2
Connect the camera to the TV.
z z
High-Definition TV” (
) to connect the camera to the TV.
3
Display images.
z z z
<
1> button.
Images from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
144
4
Control the camera with the TV remote.
z z q><r> buttons on the remote to browse images.
z z press the OK/Select button. Select control panel options by pressing the
< q><r> buttons to choose an option, and then pressing the OK/Select button again.
Camera Control Panel Options Shown on the TV
Return
Group Playback
Play Movie
.
Slideshow
Index Playback l
Change Display
Closes the menu.
Displays sets of images shot in [
).
(Only displayed when a grouped image is selected.)
Starts movie playback. (Only displayed when a movie is selected.)
Starts slideshow playback. To switch images during playback, press the < q><r> buttons on the remote control.
Displays multiple images in an index.
•
Pressing buttons, such as the < n> button, on the camera will switch control to the camera itself, which will prevent remote control until you return to single-image display.
•
Moving the zoom lever on the camera will switch control to the camera itself, which will prevent remote control until you return to single-image display.
•
The camera may not always respond correctly even if the remote is for an
HDMI CEC-compatible TV.
Still Images Movies
Playback on a Standard-Definition TV
Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST
(sold separately) enables you to view your shots on the larger screen of the
TV as you control the camera.
Yellow
Yellow
White
Red
1
Make sure the camera and TV are off.
2
Connect the camera to the TV.
z z the video inputs as shown.
Red
White z z and insert the cable plug fully into the camera terminal.
3
Display images.
z z
High-Definition TV” (
images.
•
Correct display is not possible unless the camera video output format (NTSC or PAL) matches the TV format. To change the video output format, press the < n> button and choose [Video
System] on the [
3] tab.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
145
•
When the camera and TV are connected, you can also shoot while previewing shots on the larger screen of the TV. To shoot, follow the same steps as when using the camera screen. However, AF-Point Zoom (
), Stitch Assist
) are not available.
Still Images Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC40 (sold separately) eliminates the need to monitor the remaining battery level.
Terminals
1
Make sure the camera is off.
2
Insert the coupler.
z z
open the cover.
z z shown, just as you would a battery pack
(following step 3 in “Inserting the Battery
z z
close the cover.
3
Connect the adapter to the coupler.
z z plug fully into the coupler.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
146
4
Connect the power cord.
z z compact power adapter, and then plug the other end into a power outlet.
z z z z unplug the power cord from the outlet.
•
Do not disconnect the adapter or unplug the power cord while the camera is still on. This may erase your shots or damage the camera.
•
Do not attach the adapter or adapter cord to other objects. Doing so could result in malfunction or damage to the product.
Using the Software
The software available for download from the Canon website is introduced below, with instructions for installation and saving images to a computer.
Software
After downloading the software from the Canon website and installing it, you can do the following things on your computer.
CameraWindow
z z
ImageBrowser EX
z z z z
•
Internet access is required, and any ISP account charges and access fees must be paid separately.
Software Instruction Manual
Refer to the instruction manual when using the software. The manual can be accessed from the help system of software (some software excluded).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
147
Computer Connections via a Cable
Checking Your Computer Environment
The software can be used on the following computers. For detailed system requirements and compatibility information, including support in new operating systems, visit the Canon website.
Macintosh
Operating
System*
Windows
Windows 8
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Mac OS X 10.6
Mac OS X 10.7
Mac OS X 10.8
*
When sending images to a computer via Wi-Fi, check the system requirements in
"Checking Your Computer Environment" (
•
Check the Canon website for the latest system requirements, including supported OS versions.
Installing the Software
For software installation instructions, see "Installing the Software" (
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some software excluded).
1
Connect the camera to the computer.
z z cover ( ). With the smaller plug of the
USB cable in the orientation shown, insert the plug fully into the camera terminal ( ).
z z in the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual.
2
Turn the camera on to access
CameraWindow.
z z 1> button to turn the camera on.
z z
CameraWindow is displayed when a connection is established between the camera and computer.
z z below.
z z
] link to modify the program.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
148
CameraWindow z z
Camera] and then click [OK].
z z
].
3
Save the images to the computer.
z z then click [Import Untransferred Images].
z z folder on the computer, in separate folders named by date.
z z
CameraWindow, press the <
1> button to turn the camera off, and unplug the cable.
z z computer, refer to “Software Instruction
).
Cover
•
In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in the taskbar.
•
To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera] on the screen displayed when you turn the camera on in step 2. If CameraWindow is not displayed, click the [Start] menu and choose
[All Programs]
► [Canon Utilities] ► [CameraWindow] ► [CameraWindow].
•
On a Macintosh computer, if CameraWindow is not displayed after step 2, click the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
•
Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply.
- It may take a few minutes after you connect the camera to the computer until camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information, depending on the operating system version, the software in use, or image file sizes.
- Some functions provided by the software may not be available, such as movie editing.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
149
Still Images Movies
Printing Images
Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare orders or print images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer. Also refer to the printer manual for additional information.
Still Images
Easy Print
Easily print your shots by connecting the camera to a PictBridge-compatible printer (sold separately) with the USB cable.
1
Make sure the camera and printer are off.
2
Connect the camera to the printer.
z z cable plug in the orientation shown, insert the plug fully into the camera terminal.
z z printer. For other connection details, refer to the printer manual.
3
Turn the printer on.
4
Turn the camera on.
z z 1> button to turn the camera on.
5
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image.
6
Access the printing screen.
z z m> button, choose [c], and press the < m> button again.
7
Print the image.
z z o><p> buttons or turn the
<
7> dial to choose [Print], and then press the < m> button.
z z z z procedures starting from step 5 after printing is finished.
z z camera and printer off and disconnect the cable.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
•
For Canon-brand PictBridge-compatible printers (sold separately), see
150
Still Images
Configuring Print Settings
1
Access the printing screen.
z z
(
) to access the screen at left.
2
Configure the settings.
z z o><p> buttons or turn the <
7> dial to choose an item, and then choose an option by pressing the
< q><r> buttons.
Default
Date
File No.
Both
Off
Default
Off
Matches current printer settings.
Prints images with the date added.
Prints images with the file number added.
Prints images with both the date and file number added.
–
Matches current printer settings.
–
On
Uses information from the time of shooting to print under optimal settings.
Red-Eye 1 Corrects red-eye.
Cropping
Paper
Settings
No. of Copies Choose the number of copies to print.
–
–
Specify a desired image area to print (
).
Specify the paper size, layout, and other details
Still Images
Cropping Images before Printing
By cropping images before printing, you can print a desired image area instead of the entire image.
1
Choose [Cropping].
z z
Settings” (
) to access the printing screen, choose [Cropping] and press the
< m> button.
z z indicating the image area to print.
2
Adjust the cropping frame as needed.
z z lever.
z z
< o><p><q><r> buttons.
z z 7> dial.
z z m> button.
3
Print the image.
z z
) to print.
•
Cropping may not be possible at small image sizes, or at some aspect ratios.
•
Dates may not be printed correctly if you crop images shot with
[Date Stamp ] selected.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
151
Still Images
Choosing Paper Size and Layout before Printing
1
Choose [Paper Settings].
z z
screen, choose [Paper Settings] and press the < m> button.
2
Choose a paper size.
z z o><p> buttons or turn the
<
7> dial to choose an option, and then press the < m> button.
3
Choose a type of paper.
z z o><p> buttons or turn the
<
7> dial to choose an option, and then press the < m> button.
Cover
4
Choose a layout.
z z o><p> buttons or turn the
<
7> dial to choose an option.
z z
< q><r> buttons to specify the number of images per sheet.
z z m> button.
5
Print the image.
Available Layout Options
Default
Bordered
Borderless
N-up
ID Photo
Fixed Size
Matches current printer settings.
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print per sheet.
Prints images for identification purposes.
Only available for images with a resolution of L and an aspect ratio of
4:3.
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Printing ID Photos
Still Images
1
Choose [ID Photo].
z z
Paper Size and Layout before Printing”
152 ), choose [ID Photo] and press
the < m> button.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
152
2
Choose the long and short side length.
z z o><p> buttons or turn the
<
7> dial to choose an item. Choose the length by pressing the < q><r> buttons, and then press the < m> button.
3
Choose the printing area.
z z
Printing” (
) to choose the printing area.
4
Print the image.
Movies
Printing Movie Scenes
1
Access the printing screen.
z z
150 ) to choose a movie. The screen
at left is displayed.
2
Choose a printing method.
z z o><p> buttons or turn the <
7> dial to choose [ ], and then press the < q><r> buttons to choose the printing method.
3
Print the image.
Movie Printing Options
Single
Sequence
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a single sheet of paper. You can also print the folder number, file number, and elapsed time for the frame by setting [Caption] to [On].
•
To cancel printing in progress, press the < m> button.
•
[ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridgecompatible printers from CP720/CP730 and earlier models.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
153
Still Images
Adding Images to the Print List (DPOF)
) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
Still Images
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and other settings as follows. These settings apply to all images in the print list.
z z n> button, and then choose [Print Settings] on the [
2] tab.
Choose and configure items as desired
(
).
Print Type
Date
File No.
Standard
Index
Both
On
Off
On
Off
One image is printed per sheet.
Smaller versions of multiple images are printed per sheet.
Both standard and index formats are printed.
Images are printed with the shooting date.
–
Images are printed with the file number.
–
Clear DPOF data
On
Off
All image print list settings are cleared after printing.
–
•
Not all of your DPOF settings may be applied in printing by the printer or photo development service, in some cases.
•
[ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all previous settings.
•
Setting [Date] to [On] may cause some printers to print the date twice.
•
Specifying [Index] will prevent you from choosing [On] for both [Date] and [File
No.] at the same time.
•
Index printing is not available on some Canon-brand PictBridge-compatible printers (sold separately).
•
The date is printed in a format matching setting details in [Date/Time] on the
[
3] tab (
Still Images
Setting Up Printing for Individual Images
1
Choose [Select Images & Qty.].
z z n> button, choose
[Select Images & Qty.] on the [
2] tab, and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
154
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
z z copies.
z z it is labeled with a [ ] icon. To cancel index printing for the image, press the
< m> button again. [ ] is no longer displayed.
3
Specify the number of prints.
z z o><p> buttons or turn the
<
7> dial to specify the number of prints
(up to 99).
z z specify the number of prints, repeat steps
2 – 3.
z z index prints. You can only choose which images to print, by following step 2.
z z n> button to return to the menu screen.
Still Images
Setting Up Printing for a Range of Images
z z for Individual Images” (
[Select Range] and press the < m> button.
z z
z z o><p> buttons to choose
[Order], and then press the < m> button.
Still Images
Setting Up Printing for All Images
z z for Individual Images” (
[Select All Images] and press the < m> button.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
155
Still Images
Clearing All Images from the Print List
z z
), choose
[Clear All Selections] and press the < m> button.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
Still Images
Printing Images Added to the Print List (DPOF)
z z
–
at left is displayed after you connect the camera to a PictBridge-compatible printer. Press the < o><p> buttons to choose [Print now], and then simply press the < m> button to print the images in the print list.
z z stop will be resumed from the next image.
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images on a memory card and importing them into the software on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with your own printer.
Choosing a Selection Method
z z n> button, choose
[Photobook Set-up] on the [
1] tab, and then choose how you will select images.
•
[ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all previous settings.
•
After importing images to your computer, also refer to “Software Instruction
Manual” (
147 ) and the printer manual for further information.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
156
Still Images
Adding Images Individually
1
Choose [Select].
z z
[Select] and press the < m> button.
2
Choose an image.
z z q><r> buttons or turn the
<
7> dial to choose an image, and then press the < m> button.
z z
] is displayed.
z z press the < m> button again. [ ] is no longer displayed.
z z images.
z z n> button to return to the menu screen.
Cover
Still Images
Adding All Images to a Photobook
z z
[Select All Images] and press the < m> button.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
Still Images
Removing All Images from a Photobook
z z
[Clear All Selections] and press the < m> button.
z z q><r> buttons or turn the
<
7> dial to choose [OK], and then press the < m> button.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
157
10
Appendix
Helpful information when using the camera
Troubleshooting .............................................
On-Screen Messages .....................................
On-Screen Information ..................................
Shooting (Information Display) ............................
Playback (Detailed Information Display) .............
Functions and Menu Tables ..........................
Functions Available in Each Shooting Mode .......
FUNC. Menu .......................................................
4 Shooting Tab Menu........................................
3 Set Up Tab Menu ...........................................
1 Playback Tab Menu .......................................
2 Print Tab Menu ...............................................
Playback Mode FUNC. Menu ..............................
Handling Precautions ....................................
Specifications .................................................
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
158
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Nothing happens when the power button is pressed.
•
Confirm that the battery pack is charged ( =
).
•
Confirm that the battery pack is inserted facing the correct way ( =
).
•
Confirm that the memory card/battery cover is fully closed (
•
Dirty battery terminals reduce battery performance. Try cleaning the terminals with a cotton swab and reinserting the battery pack a few times.
The battery pack runs out of power quickly.
•
Battery performance decreases at low temperatures. Try warming the battery pack a little by putting it in your pocket, for example, ensuring that the terminals do not touch any metal objects.
•
If these measures do not help and the battery pack still runs out of power soon after charging, it has reached the end of its life. Purchase a new battery pack.
The lens is not retracted.
•
Do not open the memory card/battery cover while the camera is on. Close the cover,
turn the camera on, and then turn it off again (
).
The battery pack is swollen.
•
Battery swelling is normal and does not pose any safety concerns. However, if battery swelling prevents the battery pack from fitting in the camera, contact a Canon
Customer Support Help Desk.
Display on a TV
Camera images look distorted or not displayed on a TV (
Shooting
Cannot shoot.
•
In Playback mode (
84 ), press the shutter button halfway (
).
Strange display on the screen under low light (
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are recorded in movies.
•
The screen may darken under bright light.
•
The screen may flicker under fluorescent or LED lighting.
•
Purplish banding may appear on the screen if you compose a shot that includes a bright light source.
No date stamp is added to images.
•
Configure the [Date Stamp
36 ). Note that date stamps are not
added to images automatically, merely because you have configured the [Date/Time]
•
Date stamps are not added in shooting modes (
) in which this setting cannot be configured (
[
h] flashes on the screen when the shutter button is pressed, and
).
[ ] is displayed when the shutter button is pressed halfway (
).
•
Set [IS Mode] to [Continuous] (
•
Raise the flash and set the flash mode to [
).
•
).
•
Mount the camera on a tripod or take other measures to keep it still. In this case, you
should set [IS Mode] to [Off] (
).
Shots are out of focus.
•
Press the shutter button halfway to focus on subjects before pressing it all the way
).
•
Make sure subjects are within focusing range (
).
•
Set [AF-assist Beam] to [On] (
).
•
Confirm that unneeded functions such as macro are deactivated.
•
Try shooting with focus lock or AF lock (
).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
159
No AF frames are displayed and the camera does not focus when the shutter button is pressed halfway.
•
To have AF frames displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered before you press the shutter button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
•
Raise the flash and set the flash mode to [ h] (
•
Adjust brightness by using exposure compensation (
).
•
Adjust contrast by using i-Contrast (
).
•
Use AE lock or spot metering (
Subjects look too bright, highlights are washed-out.
•
Lower the flash and set the flash mode to [ !] (
•
Adjust brightness by using exposure compensation (
).
•
Use AE lock or spot metering (
•
Reduce the lighting on subjects.
Shots look too dark despite the flash firing (
).
•
•
Adjust brightness by using flash exposure compensation or changing the flash output
,
).
•
Increase the ISO speed (
Subjects in flash shots look too bright, highlights are washed-out.
•
•
Lower the flash and set the flash mode to [ !] (
•
Adjust brightness by using flash exposure compensation or changing the flash output
,
).
White dots or similar image artifacts appear in flash shots.
•
This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
•
Lower the ISO speed (
Subjects are affected by red-eye (
).
•
) to activate the red-eye reduction lamp
(
) in flash shots. For best results, have subjects look at the red-eye reduction lamp. Also try increasing the lighting in indoor scenes and shooting at closer range.
•
Edit images using red-eye correction (
).
Recording to the memory card takes too long, or continuous shooting is slower.
•
Use the camera to perform low-level formatting of the memory card (
).
Shooting settings or FUNC. menu settings are not available.
•
Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Tab Menu” (
).
The Babies icon does not display.
•
The Babies icon will not display if the birthday is not set in face information (
).
If the icons still do not display even when you set the birthday, re-register face information (
37 ), or make sure that the date/time are set correctly (
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
•
Use the camera to format the memory card, or switch to a card that supports highspeed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time (
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the memory card quickly enough. Try one of the following measures.
•
Use the camera to perform low-level formatting of the memory card (
).
•
Lower the image quality (
•
Switch to a memory card that supports high-speed recording (
Zooming is not possible.
•
Zooming is not possible when shooting movies in [
).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
160
Playback
Playback is not possible.
•
Image or movie playback may not be possible if a computer is used to rename files or
alter the folder structure. Refer to “Software Instruction Manual” (
on folder structure and file names.
Playback stops, or audio skips.
•
Switch to a memory card that you have performed low-level formatting on with the camera (
).
•
There may be brief interruptions when playing movies copied to memory cards that have slow read speeds.
•
When movies are played on a computer, frames may be dropped and audio may skip if computer performance is inadequate.
Sound is not played during movies.
•
Adjust the volume (
85 ) if you have activated [Mute] (
the movie is faint.
•
No sound is played for movies shot in [ ] mode (
recorded in this mode.
Memory Card
The memory card is not recognized.
•
Restart the camera, with the memory card in it (
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the transfer speed as follows.
•
Press the <
1> button to enter Playback mode. Hold the <n> button down as you press the < o> and <m> buttons at the same time. On the next screen, press the < q><r> buttons to choose [B], and then press the <m> button.
Wi-Fi
Cannot access the Wi-Fi menu by pressing the <
o> button.
•
The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try again.
•
In Playback mode, the Wi-Fi menu cannot be accessed during detailed information display, magnified display, or index display. Switch to single-image display and a viewing mode other than detailed information display. Similarly, the Wi-Fi menu cannot be accessed during group playback or filtered image display according to specified conditions. Cancel group or filtered image playback.
•
The Wi-Fi menu cannot be accessed while the camera is connected to a printer, computer, or TV via a cable. Disconnect the cable.
Cannot add a device/destination.
•
A total of 20 items of connection information can be added to the camera. Erase unneeded connection information from the camera first, and then add new devices/ destinations (
).
•
Use a computer or smartphone to register Web services (
•
To add a smartphone, first install the dedicated application CameraWindow on your
•
To add a computer, first install the CameraWindow application on your computer. Also
check your computer and Wi-Fi environment and settings (
•
Do not use the camera near sources of Wi-Fi signal interference, such as microwave ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
•
Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
Cannot connect to the access point.
•
Confirm that the access point channel is set to a channel supported by the camera
(
). Note that instead of auto channel assignment, it is advisable to specify a supported channel manually.
Cannot send images.
•
The destination device has insufficient storage space. Increase the storage space on the destination device and resend the images.
•
The write-protect tab of the memory card in the destination camera is set to the locked position. Slide the write-protect tab to the unlocked position.
•
Images cannot be sent to CANON iMAGE GATEWAY or other Web services if you move or rename image files or folders on the computer that received images sent using Image Sync via an access point (
). Before moving or renaming these image files or folders on the computer, make sure the images have already been sent to CANON iMAGE GATEWAY or other Web services.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
161
Cannot resize images for sending.
•
Images cannot be resized to be bigger than the resolution setting of their original size.
•
Movies cannot be resized.
Images take a long time to send./The wireless connection is disrupted.
•
Multiple images may take a long time to send. Try resizing the image to [ ] or [ ] to reduce sending time (
).
•
Movies may take a long time to send.
•
Do not use the camera near sources of Wi-Fi signal interference, such as microwave ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note that images may take a long time to send even when [ ] is displayed.
•
Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
•
When sending images to a computer from a memory card with a large amount of images (approximately 1,000), the connection may be disrupted. Import any necessary images to a computer, and then reduce the number of images on the memory card by erasing unnecessary images.
Want to erase Wi-Fi connection information before disposing of the camera or giving it to someone else.
•
Reset the Wi-Fi settings (
).
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
).
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the write-protect tab to the unlocked position (
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (
).
)
•
If the same error message is displayed even after you have formatted a supported memory card (
) and have inserted it facing the correct way (
a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot (
,
) or edit images (
). Either erase unneeded images (
memory card with enough free space (
)
No Image.
•
The memory card does not contain any images that can be displayed.
Protected! (
)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back MOV/Cannot play back MP4
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer, or images shot with another camera.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
162
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to category/Unselectable image./No identification information
•
The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies. Edit ID Info* (
),
), Favorites (
), Edit* (
Print List* (
), and Photobook Set-up* (
).
•
Grouped images cannot be processed (
).
Invalid selection range
•
When specifying a range for image selection (
,
choose an initial image that was after the final image, or vice-versa.
Exceeded selection limit
•
More than 998 images were selected for Print List (
) or Photobook Set-up
(
156 ). Choose 998 images or less.
•
) or Photobook Set-up (
) settings could not be saved correctly. Reduce the number of selected images and try again.
•
You attempted to choose more than 500 images in Protect (
), Erase
(
Communication error
•
An excessive amount of images (approx. 1,000) on the memory card prevented printing or image transfer to a computer. To transfer the images, use a commercially available USB card reader. To print, insert the memory card directly into the printer card slot.
Naming error!
•
The folder could not be created or images could not be recorded, because the highest supported folder number (999) for storing images on the card has been reached and the highest supported image number (9999) for images in folders has been reached.
On the [
3] tab, change [File Numbering] to [Auto Reset] ( =
).
Lens Error
•
This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations.
•
Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
•
If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image.
•
Frequent display of this error message may indicate camera damage. In this case, write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
File Error
•
150 ) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is connected to the printer.
Print error
•
Check the paper size setting (
). If this error message is displayed when the setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
•
Contact a Canon Customer Support Help Desk to request assistance with ink absorber replacement.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
163
Wi-Fi
Connection failed
•
No access points were recognized. Check the access point settings (
•
A device could not be found. Turn the camera off and on again, and retry the connection.
•
Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
•
The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again.
No access points found
•
Check to make sure that the access point is turned on.
•
When connecting to an access point manually, make sure that you entered the correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
•
Check the access point security settings (
).
IP address conflict
•
Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
•
You may be in an environment where Wi-Fi signals are obstructed.
•
Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band.
•
Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
•
Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
•
If the same error message is displayed even when you have inserted a formatted memory card facing the correct way, contact a Canon Customer Support Help Desk.
Cover
Receiving failed
Insufficient space on card
•
There is not enough free space on the memory card in the target camera to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space.
Receiving failed
Memory card locked
•
The write-protect tab of the memory card in the camera to receive the images is set to the locked position. Slide the write-protect tab to the unlocked position.
Receiving failed
Naming error!
•
When the highest folder number (999), and the highest image number (9999) have been reached on the receiving camera, images cannot be received.
Insufficient space on server
•
Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.
•
Save the images sent via Image Sync (
) to your computer.
Check network settings
•
Check to make sure your computer can connect to the Internet with the current network settings.
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
164
On-Screen Information
Shooting (Information Display)
The same information is shown on the viewfinder.
Battery level
)
White balance
Drive mode
)
Self-timer (
)
AF frame (
)
Camera shake
Metering method
(
)
Still image compression
(
),
Resolution (
)
Recordable shots
(
)
Movie resolution
(
)
Remaining time
(
Focal length
(
), Digital zoom magnification
(
), Digital tele-converter
(
)
Focusing range
(
,
), AF lock (
mode icon (
)
Shooting mode
(
icon (
)
Flash mode
(
)
Red-eye correction
(
)
Flash exposure compensation /
Flash output level
(
,
)
Spot AE point frame
(
Date stamp
(
FE lock (
)
Shutter speed
(
)
Grid lines (
)
Aperture value
(
)
Exposure compensation level
Blink detection
MF indicator
)
Image stabilization
Battery Level
An on-screen icon or message indicates the battery charge level.
Display Details
Sufficient charge
Slightly depleted, but sufficient
(Blinking red)
[Charge the battery]
Nearly depleted—charge the battery pack soon
Depleted—charge the battery pack immediately
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
165
Playback (Detailed Information Display)
), High-speed burst (
)
Shooting mode
)
ISO speed
Exposure compensation level
)
White balance
Histogram (
)
Group playback
(
), Image editing (
Compression (image quality) (
Resolution (
,
), MOV
(movies)
GPS information display (
)
Image Sync
(
)
Battery level
(
)
Metering method
(
)
Folder number - File number (
Current image no. /
Total no. of images
Shutter speed (still images) (
),
Image quality /
Frame rate (movies)
(
)
Aperture value
(
,
),
Image quality
(movies) (
Flash exposure compensation
(
)
Focusing range
(
,
)
File size
Still images:
Movies: Playback
)
Protection (
)
)
Red-eye correction
(
i-Contrast (
,
Shooting date/time
•
Some information may not be displayed when viewing images on a TV
(
).
Summary of Movie Control Panel in "Viewing" (
Exit
Play
Slow Motion (To adjust the playback speed, press the < q><r> buttons or turn the <
7> dial. No sound is played.)
Skip Backward* (To continue skipping backward, keep holding down the < m> button.)
Previous Frame (For fast-rewind, keep holding down the < m> button.)
Next Frame (For fast-forward, keep holding down the < m> button.)
Skip Forward* (To continue skipping forward, keep holding down the < m> button.)
*
c
Shown when the camera is connected to a PictBridge-compatible printer
(
).
* Displays the frame approx. 4 sec. before or after the current frame.
•
To skip forward or back during movie playback, press the < q><r> buttons.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
166
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
D B M G
Function
Exposure Compensation (
)
Flash (
–
O O O h
Z
!
Flash Output Level (
)
)
AE Lock/FE Lock (
,
3
Focusing Range (
)
– – –
O
O O O O
–
O
–
O
– – – –
– O O O
O O O
–
O O
–
O
–
O
–
–
–
–
O O O
O O O
O O O O
O O O O
O O O O
O O O O e f
)
Normal
)
)
)
No Information Display
Information Display
).
*2 Not available, but switches to [
Z] in some cases.
*3 FE lock not available in [
!] flash mode.
O O O O
O O O O
O O O O
O O O O
O O O O
*1
O
O
O
O
O
O
O
–
–
–
–
–
–
O
O
O
–
O
O
O
–
–
–
–
O
–
O
O
–
–
–
–
–
–
–
–
O
–
*2
K
I
O O O O O O O O O O O O O O O
–
T
Y
–
–
–
–
–
–
–
–
O O O O O
–
O O O O O
–
– – – – – –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
– –
– –
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
–
–
–
–
–
O O O O O O O O
O O O O O O O O O
O
– – – – – – – –
– – – – – – – – –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O O O O O O O O O O O O O O O O O
O O – – – O O – O O O O O O O O O
O
–
O
–
–
–
–
–
–
–
O
–
O
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
– – – –
O O
O O O O O O O
O
– – – –
O O
–
–
–
–
–
–
–
–
–
–
–
–
O O O O O O
O O O O O O
– –
O O O O
O
– – – –
O O O
– – –
O O O O O
–
O O O O O O O O O O O O O O O O O
O Available or set automatically. – Not available.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
167
FUNC. Menu
Shooting Mode
D B M G
Function
Metering Method (
My Colors (
O
O
O
O
O
O
O
O
O
–
O
–
* 1
White Balance (
O O O O
O O O O
O
–
O
–
*
2
)
O O O O
O O O O
O
–
O
–
–
O O O
O O O O
O
–
O
–
)
O O O O O O
] [ $
Drive Mode (
O O O O O O
*
3
O
O O O O
O
O
O
O
O
O
O
O
O
O
O
–
–
*1 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*2 Not available in [ x] or [v].
*3 [ ] is set with [ f], AF lock, or [t].
I
K
O O O O O
O O
– – –
– – – – –
T
Y
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
– –
O O O
– – –
O
– – – – – – – –
O O O O O O O O O O O O O O O O O
– – O O O O – – O – – – – – – – –
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
O O
– – – –
O O O O O O O O O O O
–
O O O O O O O O O O O
O
–
O
O
O
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O Available or set automatically. – Not available.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
168
Shooting Mode
D B M G
Function
Still Image Aspect Ratio (
O O O O
O O O O
O O O O
O O O O
Resolution (
O O O O
O O O O
– – – –
)
O O O O
O O O O
Movie Quality (
O O O O
O O O O
*1 Synchronizes with the aspect ratio setting and is automatically set (
).
O
O
–
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
O
O
O
K
I
T
Y
O
O
–
O O O
–
O O O
–
–
O
O
O
O
–
–
–
–
O
–
–
–
–
–
O O O O
O O O O
O O O O O O O O O O O O O O O O O
O
–
O O O
–
O O
– – – – –
O O O O
O O O O O
O
–
O O O
– – – – –
–
–
O O O O O O O O O O O
O O O
– – – – – – – –
O – – – – – – – – – – –
– – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
O O O O O O O O O O
O O O O O O O O O O
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O Available or set automatically. – Not available.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
169
4 Shooting Tab Menu
Shooting Mode
D B M G
Function
)
Face AiAF
Tracking AF
FlexiZone/Center*
1
)
Standard
O
O
O
O
O
O
O
O
O
O
O
O
O O O O
Off
1.4x/1.8x
)
On
Off
Servo AF (
On
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
Continuous AF (
On
O O O O
O O O O
Off
AF-assist Beam (
)
On
O O O O
O O O O
Off
O O O O
O O O
*1 [FlexiZone] in <
G>, <M>, <B>, and <D> modes, otherwise [Center].
*2 [On] when subject movement is detected in [ ] mode.
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
–
O
O
–
*2
O
–
O
O
K
I
T
Y
O O O O O O O
O – – – – O O
O
– – – –
O O
–
–
O
–
–
O
–
–
O
–
–
–
O O O O O O
– – O O O O
O O O O O O
O
–
O O O
–
O O
– – – – – – – – –
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O
–
O O O O O
– – – – – –
O O O O
O O O O O O O O O O O O O O O O O
O – – – – – O – – – – – – O O O O
O O O O O O O O O O O O O O O O O
O O O O O O O
O O
– – – –
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O O O O O O O
O O
–
O O O O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O Available or set automatically. – Not available.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
170
Shooting Mode
D B M G
Function
MF-Point Zoom (
On
Off
)
On
Off
Flash Settings (
,
,
)
Flash Mode
Auto
Manual
Flash Exp. Comp
Flash Output
Shutter Sync.
Red-Eye Corr.
1st-curtain
2nd-curtain
On
Off
Red-Eye Lamp
Safety FE
On
Off
Auto
Off
Spot AE Point (
Center
AF Point
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O O O –
–
O O O
–
O
O O O O
O O O O
O
O
–
O
O
O
O
O
O O O
O O O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
–
O
O
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
–
O
O
O
O
–
O
–
–
–
K
I
T
Y
O
– – – –
O O
– – – – – –
O O O O
O O O O O O O O O O O O O O O O O
O
– – – –
O O
– –
O O O O O O O O
O O O O O O O O O O O O O O O O O
O O O O O
–
– – – – – –
– – – – – –
– – – – – –
O O O O O –
– – – – – –
O – O O O –
O O O O O
–
O O O O O
–
O O O O O –
– – – – – –
–
O
–
O
–
–
O
O
O
O
–
–
O O O O O O O O O
– – – – – – – – – –
– – – – – – – – – –
– – – – – – – – – –
– O O O O O O O O O
– – – – – – – – – –
– – – – – – – – – –
–
O O O O O O O O O
–
O O O O O O O O O
– O O O O O O O O O
– – – – – – – – – –
– – – – –
O
–
O O O O O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O Available or set automatically. – Not available.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
171
Shooting Mode
D B M G
Function
Safety Shift (
On
Off
)
On/Off
Review image after shooting (
Display Time
Off/Quick/2 sec./4 sec./8 sec./
Hold
Off
Display Info
Detailed
Blink Detection (
On
Off
)
On
Off
Off/Continuous
Shoot Only
)
Off
Date / Date & Time
Face ID Settings (
On/Off
)
–
O O
–
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
O O O O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
O
–
–
O
O
K
I
T
Y
– – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O
O O O O O O O O O O
–
O O O O O O
O O O O O O O O O O O O O O O O O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
– O O O O O O O O
–
O O O O O O O O
O O O O O
–
O
– – – – – – –
O O O
O O O O O O O O O O O O O O O O O
O O O O O O O O
–
O O O O O O O O
O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O
O
–
O O O
–
O O
– – – – – – – – –
O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – –
O Available or set automatically. – Not available.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
172
3 Set Up Tab Menu
Item
Mute
Volume
Sound Options
Hints & Tips
Date/Time
Time Zone
Lens Retract
Eco Mode
Power Saving
LCD Brightness
Start-up Image
Ref. Page
Item Ref. Page
Format
File Numbering
Create Folder
Units
Video System
Ctrl via HDMI
Wi-Fi Settings
Certification Logo Display
Language
Reset All
1 Playback Tab Menu
Slideshow
Erase
Protect
Rotate
Favorites
Photobook Set-up i-Contrast
Cropping
Item
Red-Eye Correction
Ref. Page
2 Print Tab Menu
Item
Resize
My Colors
Face ID Info
Transition
Scroll Display
Group Images
Auto Rotate
Resume
Item
Select Images & Qty.
Select Range
Ref. Page
–
Item
Select All Images
Clear All Selections
Print Settings
Ref. Page
Ref. Page
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
173
Playback Mode FUNC. Menu
Item
Rotate
Protect
Favorites
Group Playback
Ref. Page
Play Movie
Item
Smart Shuffle
Image Search
Slideshow
Ref. Page
Handling Precautions
•
The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact.
•
Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields, which may cause malfunction or erase image data.
•
If water droplets or dirt adheres to the camera or screen, wipe with a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
•
Never use cleaners containing organic solvents to clean the camera or screen.
•
Use a blower brush to remove dust from the lens. If cleaning is difficult, contact a Canon Customer Support Help Desk.
•
To prevent condensation from forming on the camera after sudden temperature changes (when the camera is transferred from cold to warm environments), put the camera in an airtight, resealable plastic bag and let it gradually adjust to the temperature before removing it from the bag.
•
If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove the battery pack and memory card, and wait until the moisture has evaporated before resuming use.
•
Before long-term battery storage, use up the battery pack’s remaining charge, remove it from the camera, and store it in a plastic bag or similar container. Storing a partially charged battery pack over extended periods
(about a year) may shorten its life or affect performance.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
174
Specifications
Camera Effective
Pixels (Max.)
Lens Focal Length
LCD Monitor
File Format
Data Type
Interface
Power Source
Dimensions (Based on CIPA Guidelines)
Weight (Based on
CIPA Guidelines)
Approx. 10.1 million pixels
5x zoom: 5.2 (W) – 26.0 (T) mm
(35mm film equivalent: 24 (W) – 120 (T) mm)
3.0-type color TFT LCD
Effective Pixels: Approx. 461,000 dots
Design rule for Camera File system, DPOF (version 1.1) compliant
Still Images: Exif 2.3 (JPEG)
Movies: MOV (Video: H.264; Audio: Linear PCM (stereo))
Hi-speed USB
HDMI output
Analog audio output (stereo)
Analog video output (NTSC/PAL)
Battery Pack NB-6LH
AC Adapter Kit ACK-DC40
99.8 x 59.0 x 26.3 mm (3.93 x 2.32 x 1.04 in.)
Approx. 181 g (approx. 6.38 oz.; including the battery pack/ batteries and memory card)
Approx. 160 g (approx. 5.64 oz.; camera body only)
Wi-Fi Functions
Standards
Transmission
Methods
Communication
Modes
IEEE802.11b/g/n*
* 2.4 GHz band only
OFDM modulation (IEEE 802.11g/n)
DSSS modulation (IEEE 802.11b)
Infrastructure mode*
1
, Ad hoc mode*
2
*1 Supports Wi-Fi Protected Setup
*2 Wi-Fi CERTIFIED IBSS
Supported Channels 1 – 11 (PC2007/PC2057) or 1 – 13 (PC2033)
Security
WEP, WPA-PSK (AES/TKIP),
WPA2-PSK (AES/TKIP)
Number of Shots/Recording Time, Playback Time
Number of Shots
Eco Mode On
Movie Recording Time*
1
Approx. 200
Approx. 300
Approx. 50 minutes
Continuous
Shooting*
2
Approx. 1 hour, 40 minutes
Playback Time
Approx. 5 hours
*1 Time under default camera settings, when normal operations are performed, such as shooting, pausing, turning the camera on and off, and zooming.
*2 Time available when shooting the maximum movie length (until recording stops automatically) repeatedly.
• The number of shots that can be taken is based on measurement guidelines of the
Camera & Imaging Products Association (CIPA).
• Under some shooting conditions, the number of shots and recording time may be less than mentioned above.
• Number of shots/time with a fully charged battery pack.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
175
Number of 4:3 Shots per Memory Card
Recording Pixels
Compression
Ratio
Number of Shots per Memory Card
(Approx. shots)
8 GB 32 GB
1626 6564
(Large)
10M/3648x2736 2558 10326
(Medium 1)
6M/2816x2112
2431
3721
9814
15020
7442 30040
(Medium 2)
2M/1600x1200
12927
27291
52176
110150
(Small)
0.3M/640x480 40937 165225
•
The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings.
•
The values in the table are based on 4:3 aspect ratio. If the aspect ratio is changed
), more images can be shot because the data size per image will be smaller than with 4:3 images. However, since [ ] 16:9 images have a setting of 1920 x 1080 pixels, their data size will be larger than 4:3 images.
Recording Time per Memory Card
Image Quality
Recording Time per Memory Card
8 GB 32 GB
51 min. 06 sec.
3 hr. 26 min. 28 sec.
1hr. 28 min. 53 sec.
5 hr. 59 min. 05 sec.
•
The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the recording time reaches approximately 29 minutes and 59 seconds when shooting in
[ ], or approximately 1 hour when shooting in [ ].
•
Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 4 or higher memory cards are recommended.
Flash Range
Maximum wide angle ( j)
Maximum telephoto ( i)
50 cm – 7.0m (1.6 ft. – 23 ft.)
50 cm – 2.3m (1.6 ft. – 7.5 ft.)
Shooting Range
Shooting Mode Focusing Range
Other modes
– e* f*
Maximum Wide Angle
(
j)
3 cm – ∞
(1.2 in. – infinity)
5 cm – ∞
(2.0 in. – infinity)
3 cm – 50 cm
(1.2 in. – 1.6 ft.)
3 cm – ∞
(1.2 in. – infinity)
* Not available in some shooting modes.
Maximum Telephoto
(
i)
30 cm – ∞
(11.8 in. – infinity)
30 cm – ∞
(11.8 in. – infinity)
30 cm – 50 cm
(11.8 in. – 1.6 ft.)
30 cm – ∞
(11.8 in. – infinity)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
176
Continuous Shooting Speed
Shooting Mode
G
Continuous Shooting
Mode
W
–
Speed
Approx. 1.9 shots/sec.
Approx. 0.8 shots/sec.
Approx. 0.8 shots/sec.
Approx. 4.5 shots/sec.
[
Shutter Speed
] mode, automatically set range
[
M] mode available values (sec.)
1 – 1/2000 sec.
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2, 1.6, 1.3, 1,
0.8, 0.6, 0.5, 0.4, 0.3, 1/4, 1/5, 1/6, 1/8, 1/10,
1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60,
1/80, 1/100, 1/125, 1/160, 1/200, 1/250, 1/320,
1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250,
1/1600, 1/2000
Aperture
f/number
[
B] mode available values* f/2.0 – f/8.0 (W), f/5.9 – f/8.0 (T) f/2.0, f/2.2, f/2.5, f/2.8, f/3.2, f/3.5, f/4.0, f/4.5, f/5.0, f/5.6, f/5.9, f/6.3, f/7.1, f/8.0
* Depending on the zoom position, some aperture values may not be available.
Battery Pack NB-6LH
Type:
Nominal Voltage:
Nominal Capacity:
Charging Cycles:
Operating Temperatures:
Dimensions:
Weight:
Rechargeable lithium-ion battery
3.7 V DC
1060 mAh
Approx. 300 times
0 – 40 °C (32 – 104 °F)
34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.)
Approx. 22 g (approx. 0.78 oz.)
Battery Charger CB-2LY/CB-2LYE
Rated Input:
Rated Output:
Charging Time:
Charge Indicator:
Operating Temperatures:
100 – 240 V AC (50/60 Hz), 0.085 A (100 V) – 0.05 A (240 V)
4.2 V DC, 0.7 A
Approx. 2 hr. (when using NB-6LH)
Charging: orange / Fully charged: green
(two-indicator system)
0 – 40 °C (32 – 104 °F)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
9
Accessories
10
Appendix
Index
177
Index
A
AC adapter kit ............................ 142, 146
Accessories ....................................... 142
AE lock ................................................ 63
AF frames ...................................... 70, 71
AF lock................................................. 74
Aspect ratio.......................................... 42
AUTO mode (shooting mode) .. 16, 22, 28
AV cable ............................................ 145
Av (shooting mode) ............................. 80
B
Batteries → Date/time (date/time battery)
Battery charger .............................. 2, 142
Battery pack
Charging ........................................ 12
Eco mode .................................... 135
Level ............................................ 165
Power saving ................................. 21
Black and white images ....................... 66
Blink detection ..................................... 46
C
Camera
Reset all ...................................... 139
Camera access point mode ............... 120
Camera shake ..................................... 78
CameraWindow (computer)................113
CameraWindow (smartphone)............112
CANON iMAGE GATEWAY ....... 107, 109
Clock.................................................... 26
Color Accent (shooting mode) ............. 55
Color Swap (shooting mode) ............... 56
Color (white balance)........................... 65
Compression ratio (image quality) ....... 77
Connecting via an access point ..........115
Connecting without an access point .. 120
Continuous shooting ............................ 67
High-speed burst
(shooting mode) ............................ 59
Control ring .......................................... 82
Creative filters (shooting mode)........... 52
Cropping .................................... 102, 151
Custom white balance ......................... 66
D
Date/time
Adding date stamps ...................... 36
Changing ....................................... 15
Date/time battery ........................... 15
Settings ......................................... 14
World clock .................................. 134
DC coupler......................................... 146
Defaults → Reset all
Digital tele-converter............................ 69
Digital zoom ......................................... 33
Display language ................................. 16
DPOF ................................................. 154
Drive mode .......................................... 67
E
Eco mode .......................................... 135
Editing
Cropping ...................................... 102
i-Contrast ..................................... 103
My Colors .................................... 103
Red-eye correction ...................... 104
Resizing images .......................... 101
Editing or erasing connection
information ......................................... 129
Erasing ................................................ 97
Error messages ................................. 162
Exposure
AE lock .......................................... 63
Compensation ............................... 62
FE lock .......................................... 76
F
Face AiAF (AF frame mode) ................ 70
Face ID ................................................ 37
Face select .......................................... 74
Face self-timer (shooting mode) .......... 58
Favorites ............................................ 100
FE lock................................................. 76
File numbering ................................... 138
Fireworks (shooting mode) .................. 51
Fish-eye effect (shooting mode) .......... 52
Flash
Flash exposure compensation ...... 76
On ................................................. 75
FlexiZone (AF frame mode)................. 71
Focusing
AF frames ...................................... 70
AF lock .......................................... 74
Cover
AF-point zoom ............................... 45
Face select .................................... 74
Servo AF ....................................... 73
Focusing range
Macro ............................................ 68
Manual focus ................................. 69
Focus lock ........................................... 71
FUNC. menu
Basic operations ............................ 23
Table .................................... 168, 174
G
GPS ..................................................... 87
Grid lines ............................................. 45
H
HDMI cable ................................ 141, 143
High-speed burst (shooting mode) ...... 59
Household power............................... 146
I
i-Contrast ..................................... 65, 103
Image quality → Compression ratio
(image quality)
Images
Display period ............................... 47
Erasing .......................................... 97
Playback → Viewing
Protecting ...................................... 94
Image sync ........................................ 127
Indicator ............................................... 26
ISO speed............................................ 64
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
178
L
Lamp.............................................. 46, 47
Live View Control (shooting mode) ...... 50
M
Macro (focus mode)............................. 68
Magnified display ................................. 92
Manual focus (focus mode) ................. 69
Memory cards ........................................ 2
Recording time ............................ 176
Menu
Basic operations ............................ 24
Table ............................................ 167
Metering method.................................. 63
Miniature effect (shooting mode) ......... 53
Monochrome (shooting mode)............. 55
Movies
Editing ......................................... 105
Image quality
(resolution/frame rate) ................... 44
Recording time ............................ 176
M (shooting mode)............................... 81
My Colors .................................... 66, 103
P
Package contents .................................. 2
Photobook set-up .............................. 156
PictBridge .................................. 143, 150
Playback → Viewing
Portrait (shooting mode) ...................... 50
Poster effect (shooting mode) ............. 52
Power ................................................ 142
→ AC adapter kit
→ Battery pack
Power saving ....................................... 21
Printing .............................................. 150
Program AE ......................................... 62
Protecting ............................................ 94
P (shooting mode) ............................... 62
R
Red-eye correction ...................... 43, 104
Reset all............................................. 139
Resizing images ................................ 101
Resolution (image size) ....................... 43
Ring function selector button ............... 82
Rotating ............................................... 99
S
Saving images to a computer ............ 126
Screen
Display language ........................... 16
Icons .................................... 165, 166
Menu → FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→ Memory cards
Searching ............................................ 88
Self-timer ............................................. 34
2-second self-timer ........................ 35
Customizing the self-timer ............. 35
Face self-timer (shooting mode) ... 58
Wink self-timer (shooting mode) ... 58
Sending images ................................. 123
Sending images to a computer .......... 108
Sending images to another camera... 108
Sending images to a printer............... 108
Sending images to a smartphone ...... 108
Sending images to Web services ...... 108
Sepia tone images ............................... 66
Servo AF .............................................. 73
Shooting
Shooting date/time → Date/time
Shooting information ................... 165
Slideshow ............................................ 92
Smart Shuffle ....................................... 93
Smart Shutter (shooting mode) ........... 57
Smile (shooting mode)......................... 57
Snow (shooting mode)......................... 51
Soft focus (shooting mode).................. 54
Software
Saving images to a computer ...... 148
Sounds .............................................. 133
Stereo AV cable ................................. 145
Stitch Assist (shooting mode) .............. 60
Strap ................................................ 2, 12
Super vivid (shooting mode) ................ 52
T
Terminal ..................... 144, 145, 146, 150
Toy camera effect (shooting mode) ..... 54
Tracking AF ......................................... 72
Traveling with the camera ................. 134
Troubleshooting ................................. 159
TV display .......................................... 143
Tv (shooting mode).............................. 80
Cover
V
Viewing ................................................ 18
Image search ................................ 88
Index display ................................. 88
Magnified display .......................... 92
Single-image display ..................... 18
Slideshow ...................................... 92
Smart Shuffle ................................ 93
TV display ................................... 143
W
White balance (color)........................... 65
Wi-Fi
Connecting and sending
images ......................................... 108
Wi-Fi functions ................................... 106
Wi-Fi menu .........................................114
Wink self-timer (shooting mode) .......... 58
World clock ........................................ 134
Wrist strap → Strap
Z
Zoom ....................................... 17, 28, 33
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
179
Wi-Fi (Wireless LAN) Precautions
•
The camera’s model number is PC2007,
PC2033 or PC2057 (including WLAN module model WM219). To identify your model, check the label on the bottom of the camera for a number beginning with PC.
•
•
Doing any of the following may incur legal penalties:
Altering or modifying the product
-
Removing the certification labels from the product
•
According to foreign exchange and foreign trade law regulations, export permission (or service transaction permission) from the Japanese government is necessary to export strategic resources or services
(including this product) outside Japan.
•
Because this product includes American encryption software, it falls under U.S. Export Administration Regulations, and cannot be exported to or brought into a country under U.S. trade embargo.
•
Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may change or be erased due to incorrect operation of the product, the effects of radio waves or static electricity, or accident or malfunction. Be sure to make notes of wireless LAN settings as a precaution. Please note that Canon accepts no responsibility for direct or indirect damages or loss of earnings resulting from a degradation or disappearance of content.
•
When transferring this product to another person, disposing of it, or sending it for repair, be sure to note the wireless LAN settings and reset the product to its default settings (erase settings) if necessary.
•
Canon will not make compensation for damages resulting from loss or theft of the product.
Canon accepts no responsibility for damages or loss resulting from unauthorized access or use of target devices registered on this product due to loss or theft of the product.
•
Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the guidelines noted in this guide. Canon accepts no responsibility for damages or loss if the function and product are used in ways other than as described in this guide.
•
Do not use the wireless LAN function of this product near medical equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment or other electronic equipment may affect operation of those devices.
Radio Wave Interference Precautions
•
This product may receive interference from other devices that emit radio waves. To avoid interference, be sure to use this product as far away as possible from such devices, or avoid using the devices at the same time as this product.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
180
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
•
Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the results on the screen. Networks you are not authorized to use (unknown networks) may also be displayed. However, attempting to connect to or using such networks could be regarded as unauthorized access. Be sure to use only networks you are authorized to use, and do not attempt to connect to other unknown networks.
If security settings have not been properly set, the following problems may occur.
•
Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and attempt to acquire the data you are sending.
•
Unauthorized network access
Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access such as impersonation (where someone assumes an identity to gain access to unauthorized information) or springboard attacks (where someone gains unauthorized access to your network as a springboard to cover their tracks when infiltrating other systems).
To prevent these types of problems from occurring, be sure to thoroughly secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security settings.
The camera can print to PictBridge-compatible printers via Wi-Fi. PictBridge technical standards make it easy to connect digital cameras, printers, and other devices directly. Additionally, a new standard called DPS over IP enables PictBridge connections in network environments, and the camera is also compatible with this standard.
FCC/IC Notice
Model: PC2007 (including WLAN Module Model WM219, FCC ID: AZD219)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
181
•
•
•
•
FCC Notice
(Digital Camera, Model PC2007 systems)
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
182
Trademark Acknowledgments
•
Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
•
Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
•
App Store, iPhone, and iPad are trademarks of Apple Inc.
•
The SDXC logo is a trademark of SD-3C, LLC.
•
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
•
Wi-Fi ® , Wi-Fi Alliance ® , WPA™, WPA2™ and Wi-Fi Protected Setup™ are trademarks or registered trademarks of the Wi-Fi Alliance.
•
All other trademarks are the property of their respective owners.
•
This device incorporates exFAT technology licensed from Microsoft.
•
This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the
AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
Disclaimer
•
Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited.
•
Canon reserves the right to change the contents of this guide at any time without prior notice.
•
Illustrations and screenshots in this guide may differ slightly from the actual equipment.
•
The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
7
8
5
6
9
10
3
4
1
2
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
183
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement