USER MANUAL - Sanitec bvba
USER MANUAL
- 3x2HP Hydromassage pumps or
1x3HP and 1x2HP Hydromassage pumps
- Energy-efficient LAING circulation pump
- 41 or 76 jets
- Hot air blower pump
- Ozone generator or
- UV-C water sanitizer
- Aromatherapy
ELBRUS
SPA SYSTEM
START
DELUXE
PREMIUM
Version: 01.2014
www.wellis.eu
Standard Specification
Dimensions
Shell material
Sitting places
Reclining places
Water volume
Net weight
Total number of
jets
Water diverter
Air diverter
Power requirement
Start □
2180 x 2180 x 970 mm
PU reinforced,
outdoor acrylic
(6,3 mm)
7 persons
--1310 l
300 kg
Deluxe □
2180 x 2180 x 970 mm
PU reinforced,
outdoor acrylic
(6,3 mm)
7 persons
--1310 l
340 kg
Premium □
2180 x 2180 x 970 mm
PU reinforced,
outdoor acrylic
(6,3 mm)
7 persons
--1310 l
380 kg
41pc.
76pc.
76pc.
--5pc
2pc
5pc
optimum 3 Phase,
3x16A (400V/50Hz);
or minimum 1 Phase,
1x32A (230V/50Hz)
3x 1speed, 2HP
2pc
5pc
optimum 3 Phase,
3x16A (400V/50Hz);
or minimum 1 Phase,
1x32A (230V/50Hz)
3x 1speed, 2HP
1 set (2pc.)
BALBOA BP600 /
TP600
1pcs 300W
Energy-efficient
LAING circulation
pump (0,1kW/h)
1 set (2pc.)
BALBOA BP2100 /
TP800
1pcs 300W
Energy-efficient
LAING circulation
pump (0,1kW/h)
1 set (2pc.)
BALBOA BP2100 /
BALBOA SpaTouch
---
1 lamp with 55 LEDs
1 lamp with 55 LEDs
1 pc 3kW
1 pc
4 pc
-
1 pc 3 kW
1 pc
4 pc
1pc
1 pc 3kW
1 pc
4 pc
1 pc
1pc
---
---
---
1pc
1 pc
1 Phase,
1x32A (230V/50Hz)
Hydromassage
pumps
Hot air blower
1x 1speed, 2 HP
1x 2speed, 3HP
no
Circulation pump
By hydromassage
pump
Filter system
Control system
Chromotherapy
lighting
Heating unit
1,5” drain connect
Headrest
Aromatic therapy
Ozone generator
disinfecting system
UV-C lamp
disinfecting system
Exklusive
Chromotherapie
Lighting
Frame
15 x 1 LED
15 x 1 LED
15 x 1 LED
surface-treated wood
WPC
WPC
Maintenance-free
Synthetic Cabinet
1 set
(just one,fix color)
1 set
(in optional colors)
1 set
(in optional colors)
WARRANTY LETTER
Serial number:…………………………………
Model:.…………………………………………
Distributor
Retailer
Date of buying:
_________________________
Date of buying:
_________________________
Signature:
Signature:
(stamp)
(stamp)
2014 Wellis Spa Limited Warranty
WARRANTY FOR EXPORT
Warranty; Limitations of Liability and Damages.
Company offers a limited warranty comprised of replacement of faulty parts and offers no
reimbursement for labor of repairs outside any abnormal failure rates to be determined by both parties.
5 year on spa shell: Wellis warrants the structure of the Pool Shell against defects in workmanship and
material for a period of 5 years, subject to the limitations and conditions listed in this Warranty.
3 years on spa shell surface: The acrylic spa shell is warranted against cracking, blistering or
delaminating due to defects in materials or workmanship for three years from the original date of
delivery.
2 years on spa plumbing: Spa fittings and plumbing are warranted against leaks due to defects in
materials or workmanship for two years from the original date of delivery. There is no labor coverage on
internal jet parts replacement, cleaning or adjusting.
2 years on standard and optional spa equipment – Balboa Control Systems, Jet Pump(s), Laing
Circulation Pump, Heater, WiFi modul, IR receiver: The spa equipment systems are warranted against
failure due to defects in materials or workmanship for two years from the date of delivery. Fuses, bulbs,
and seals are not covered.
2 year on Pulsar hydrotherapy system: The factory installed Pulsal hydrotherapy systems are warranted
against failure due to defects in materials or workmanship for one year from the original date of
delivery.
2 year on spa cabinets/skirts: The factory installed spa cabinets/skirts are warranted against failure due
to defects in materials or workmanship for one year from the original date of delivery.
2 year on ozone generator: The ozone generator is warranted against failure due to defects in materials
or workmanship for one year from the original date of delivery.
2 year on audio system components: The factory installed audio components (i.e. power supply,
speakers, wires, etc.) are warranted against failure due to defects in materials or workmanship for one
year from the original date of delivery. There is no in-field labor service on these items.
2 year on LED lights: The factory installed LED lights are warranted against failure due to defects in
materials or workmanship for one year from the original date of delivery.
2 year on UV-C sanitizer lamp: The factory installed UV-C sanitizer lamps are warranted against failure
due to defects in materials or workmanship for one year from the original date of delivery.
2 year on ISIS Genesis disinfection system: The factory installed ISIS Genesis disinfection systems are
warranted against failure due to defects in materials or workmanship for one year from the original date
of delivery.
1 year on blower: The blower is warranted against failure due to defects in materials or workmanship
for one year from the original date of delivery.
1 year on thermo cover: The thermo cover is warranted against failure due to defects in materials or
workmanship for one year from the original date of delivery.
1 year on Wellis Spa Umbrella: The factory installed Wellis Spa Umbrellas are warranted against failure
due to defects in materials or workmanship for one year from the original date of delivery.
1 year on LCD TV system: The factory installed LCD TV systems are warranted against failure due to
defects in materials or workmanship for one year from the original date of delivery.
90 days on skimmer house: Skimmer houses are subject to water chemistry variation and are warranted
for ninety days from the original date of delivery.
NO warranty on filters, spa pillows and skimmer house tops !!!
WARRANTY PERFORMANCE
1. This warranty does not cover cleaning or adjusting spa or for customer error in following correct
procedures.
2. Wellis Magyarország Kft. reserves the right to substitute a spa or component of equivalent value,
either new or factory reconditioned and any such repair or replacement shall assume as its warranty
only the remaining portion of the warranty on the original product.
3. Wellis Magyarország Kft. is not liable for any costs associated with in-ground, in-deck, or in-home
installations or removal. Costs associated with installations other than standard residential portable
spa use will be the sole responsibility of the spa owner. The spa owner is responsible for any freight
and/or delivery and set up charges for a replacement spa.
4. The radio reception is not covered under warranty due to the following: The radio signal reception
may be impaired by the positioning of the spa next to or near structures, high power lines, main
power lines or metallic towers. The signal reception may be impaired if the spa is located near hills or
it is in a valley or simply outside the broadcasting range of the radio stations. The position of the spa
and radio may be “out of phase with the bandwidth” or the radio frequency. External signal reception
assistance may be required and is not part of this warranty.
5. Wellis Magyarország Kft. shall not be liable for any incidental or consequential damages for breach of
any expressed or implied warranty, breach of contract, negligence, strict liability, or any other legal
theory related to this product. All consequential expenses including loss of use, damages, or
contingent liabilities arising out of any alleged deficiencies of the spa are specifically excluded from
this warranty.
6. Warranty coverage is only extended to the original buyer. Spas purchased from anyone other than a
current Wellis Spas Authorized Dealer are specifically excluded from any warranty coverage. To
obtain warranty service, please notify your Wellis Spas Authorized Dealer in writing within 14 days of
the problem (with problem details, original proof of purchase).
7. The Authorized Dealer will repair or replace any component found defective under the terms of this
warranty – and permitted by Wellis Magyarország Kft. Travelling expenses may apply outside of every
European cities.
8. If the Authorized Dealer doesn`t supply the customer with proper service, please notify Wellis
Magyarország Kft. by mail within 10 days of the problem.
9. Electrical connection: All electrical connections are required to be done by a qualified electrician
solely. The spa has to be connected to separate current circuit equipped with suitable power switch
and life safety relay. Omission of these electrical conditions/requirements entails immediate loss of
the warranty.
10. Water connection: All water connections are required to be done by a qualified plumber solely. If the
spa is placed indoor make allowances for the following special requirements: The water accumulates
around the spa so the socket cover has to be in possession of a suitable drainage. This arrangement
hinders the water in collecting.
11. Wellis Magyarország Kft. offers a limited warranty as described in the Warranty Letter.
12. Warranty claim is enforceable with this warrant letter. Irregular establishing of this warrant letter
doesn`t affect to the validity of warranty obligation. If customer doesn`t get this warrant letter from
the Authorized Dealer, it doesn`t affect to the validity of warranty obligation.
SPA WARRANTY COVERAGE WILL BE VOID UNDER THE FOLLOWING CONDITIONS
1. If damages caused by inefficient maintance of water and/or chemical dosage.
Terms of water hardness (limits): between 6-10 German degrees.
2. If the spa surface or equipment has been damaged or discolored as a result of improper water
chemistry maintenance, including sanitizers such as trichlor type chlorine, calcium hypochlorite,
sodium hypochlorite, and any other chemicals or a chemical dispenser that may rest on the spa
surface. Some household cleaners can damage the spa shell or equipment and will void this warranty
completely. Use only products that are recommended for spas.
3. If damage to the spa has resulted from an Act of God, force majeure, moving of the spa, improper
installation, unstable power conditions, customer negligence, customer abuse, weather and sunlight
damage or damage caused in shipment.
4. If damage to the spa has resulted from operation outside – temperature exceed 45°C.
5. If the spa has been subjected to any alterations, after-market product installations, misuses, abuses,
or if any repairs are attempted by anyone other than its authorised dealers.
6. If damage to the spa has resulted from improper use of thermo cover.
7. If damage to the spa has resulted from clogged, dirty and/or sclerosed filter. The spa warranty will be
void if the owner does not follow all the instructions in the owners manual regarding the proper use
and care of the spa. Warranty doesn`t apply to filters!
8. If damage to the spa has resulted from improper electrical installation, voltage drop, peak voltage
and/or operation is outside the pale of + / - 10% voltage range.
Electrical conditions:
For electrical installation it is required to build a 30mA circuit breaker (life safety relay), which is just
connected to the spa (not allowed to connect any other devices). This 30 mA circuit breaker is not
permitted to be installed in the same place as the spa.
Required to install IEC, RCCB system in spa`s common surroundings.
Length of cable is 3 meters at the place of spa installed.
It is obligatory to observe all information, details and requirements which are in the product`s
installation diagram regarding elelectricity demand and drain installation.
These information can be found in the user manual, or able to download from www.wellis.eu. If you
didn`t get the document from your dealer, please contact [email protected]
9. If damage to the spa has resulted from debris in jets (i.e. sand, dirty calcium, leaves etc.).
10. Warranty doesn`t extend to the waste water manifold (drain hose), pillows, filters, bulbs and/or
pump
sealings.
LIMITATIONS
The Warranty expressions specified excludes any other implied or oral undertakings. Purchasers also
have current rights under statute which will be respected by Wellis Magyarország Kft. After a period
of 12 months, for the purpose of assessing Wellis Magyarország Kft. liability, all aspects covered by
this Warranty will be treated on a pro-rata basis. Wellis Magyarország Kft. or its agents will not be
liable for any incidental or consequential loss or injury. Nor will Wellis Magyarország Kft.be liable for
costs associated with but not limited to building alterations or finishes and under no circumstances
will be liable for greater expense than the amount paid for the product.
THE SPA OWNER MUST DO EVERYTHING STATED IN THE SPA OWNERS MANUAL AND WARRANTY
LETTER TO SAFEGUARD AND MAINTAIN THE SPA!
MANUFACTURER OF YOUR SPA:
Wellis Magyarország Kft.
Registered: .................................................................. 1118 Budapest, Budaörsi út 31/c, Hungary;
Central premise:..............................................2371 Dabas, Mánteleki út hrsz: 0417 Pf: 7, Hungary
AUTHORIZED DEALER OF YOUR SPA
Company in charge of your spa
Company name: .............................................................................................................................
Registered: .....................................................................................................................................
Central premise:.............................................................................................................................
Place of complaint: ........................................................................................................................
E-mail address:...............................................................................................................................
Website: .........................................................................................................................................
Phone number: ..............................................................................................................................
Fax: ................................................................................................................................................
Person in charge of installation: ....................................................................................................
Date of installation: .......................................................................................................................
SERVICE-WORK
The announcement date of damage:
_____________________________
Date of received goods/parts for repair:
_____________________________
Date of the return of repaired goods/parts: ____________________________
Date of site service:
_____________________________
Improved error:
_____________________________
Mode of repair:
_____________________________
Failed component:
_____________________________
New deadline for the warranty:
__________________________
The announcement date of damage:
_____________________________
Date of received goods/parts for repair:
_____________________________
Date of the return of repaired goods/parts: _____________________________
Date of site service:
_____________________________
Improved error:
_____________________________
Mode of repair:
_____________________________
Failed component:
_____________________________
New deadline for the warranty:
_____________________________
The announcement date of damage:
_____________________________
Date of received goods/parts for repair:
_____________________________
Date of the return of repaired goods/parts: _____________________________
Date of site service:
_____________________________
Improved error:
_____________________________
Mode of repair:
_____________________________
Failed component:
_____________________________
New deadline for the warranty:
_____________________________
The announcement date of damage:
_____________________________
Date of received goods/parts for repair:
_____________________________
Date of the return of repaired goods/parts: ____________________________
Date of site service:
_____________________________
Improved error:
_____________________________
Mode of repair:
_____________________________
Failed component:
_____________________________
New deadline for the warranty:
_____________________________
STAMP
STAMP
STAMP
STAMP
CLEANING
GENERAL INFORMATION:
Water recirculation-filtering
The basic conditions for keeping the water of the massage basin clean are the removal of mechanical dirt
and the blending of the chemicals in the water with continuous water recirculation. In all our basins
appliances comprising of a pump and a filter are used for this purpose. The filter removes the dirt floating
in the water or at the surface of the water. Filters with paper or textile filter medium are used for the
basins. The dirt settled at the bottom of the basin is filtered out with the aid of the suction and stirring
created by the massage pumps.
Don't leave the spa expose to the sun without water or the cover, Exposure to direct sunlight can cause
solar distress of the shell material. Use and cover spa cover when spa is not in use, whether it is empty or
full. Try to deep your spa away form rain, snow, if possible build a gazebo for your spa.
1.
2.
3.
4.
Don't attempt to open the electrical control box. There are no user serviceable parts inside.
Drain, clean and refill your spa with fresh water on a regular schedule.
Clean the filter cartridge at least once per month.
Have spa users bathe before entering the spa water, showering without soap prior to enter the
spa, and using only the rinse cycle when laundering your bathing suit, will help avoiding
detergent and soap residue in spa water.
FILTER CARTRIDGE RMOVAL AND CLEANING
You spa filter cartridge can become clogged with mineral
particles of calcification from hard water. Which may
result in reduced water flow. We recommended cleaning
you filter cartridge every month.
1.Remove filter lid.
2.Unscrew filter cartridge.
3.Clean with high pressure nozzle to remove all debris
clinging to the filter.
4.Soak filter in warm water and Wellis Alga-Sokk to
remove all body oils and grime. Never use chlorine to
clean the filter! If you use textile filter, you can wash it
int he washing machine too.
The chemical equilibrium of the water
The water of the whirlpool will be clean and clear if its chemical components are in equilibrium.
1. pH-values:
The first important indicator is the pH value of the water. pH is measured in a scale between 0-14 where 7
is the neutral value. Below this level the water is acid, above it alkaline. The pH value of the human eye is
around 7.5, below 7.2 and above 7.8 the water will sting the eyes of the bather. Experiences have shown
that most problems are caused by a too high pH value. An improper value reduces the effect of the
disinfectant.
2. Water hardness:
Water hardness is determined by the quantity of calcium and magnesium salts dissolved in the water.
Hard waters contain too much of these dissolved salts and thus, left alone, scale will form. Scales can
cause significant damage both to the walls of the basin, to the piping, filter and to the heating and
engineering units. In Hungary waters are medium hard. Water hardness cannot be reduced by the addition
of chemicals, but the formation of scales can be prevented.
3. Disinfection:
Disinfectant: is the chemical that eliminates or neutralises the microorganisms (bacteria, algae, fungi,
viruses) present in the water. Microorganisms are small, microscopic organisms, which cannot be
detected with the naked eye and are continuously getting into the water through rain, wind and the body
of the bathers. If they are not eliminated they pass from one person to the other through the water (and
may cause sickness, infection). Organic matter turns the water of the basin opaque and cloudy. Most often
– as we are dealing with warm water basins – bromine or active oxygen is used.
4. Frothing:
Froth is the smaller-bigger agglomeration of the bubbles and colloid contaminants found on the surface of
the water. It is mostly caused by the mixing of the dirt, cosmetics, body care lotions, etc. that soak out of
the human skin and the chemicals. It endangers the conservation of the aesthetic appearance and
cleanliness of the water.
5. Water analysers:
There are several different types of water analysers, which are mostly used to measure chemical and
disinfectant effect. Chemical (pH); Disinfectant (Br, O3)
Types:
- Box containing tablets and graduated measuring glass.
- Litmus paper indicators in a box.
Replacing underwater light
1.
2.
3.
4.
5.
6.
Turn off thepower on the spa.
Remove plastic panel behind where the underwater light is situated.
There is a plug with two wires going into the back of the light.
Remove this plug by turning anticlockwise.
Replace faulty light globe with a new one.
Replace parts and put the plastic panel back on.
TROUBLESHOOTING
Elbrus Start Spa system
BALBOA TP600
HOT TUB Control panel
Main screen
NAVIGATION
Navigating the entire menu structure is done with 2 or 3 buttons on the control panel. Panels that have
two Temperature buttons (Warm and Cool) can use both of them to simplify navigation and
programming where a single Temperature icon is shown.
The LIGHT Button is also used to choose the various menus and navigate each section.
Typical use of the Temperature button(s) allows changing the Set Temperature while the numbers are
flashing in the LCD. Pressing the LIGHT button while the numbers are flashing will enter the menus.
The menus can be exited with certain button presses. Simply waiting for several seconds will return the
panel operation to normal.
KEY
Indicates Alternating or Progressive Message - every 1/2 second
Indicates flashing or changing segment
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel configuration
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and ignores any
change to that menu item.
POWER-UP SCREENS
Each time the System powers up, a series of numbers is displayed. After the startup sequence of
numbers, the system will enter Priming Mode.
PREPARATION AND FILLING
Fill the spa to its correct operating level. Be sure to open all valves and jets in the plumbing system
before filling to allow as much air as possible to escape from the plumbing and the control system
during the filling process.
After turning the power on at the main power panel, the top-side panel display will go through specific
sequences. These sequences are normal and display a variety of information regarding the configuration
of the hot tub control.
PRIMING MODE – M019*
This mode will last for 4-5 minutes or you can manually exit the priming mode after the pump(s) have
primed.
*M019 is a Message Code.
Regardless of whether the priming mode ends automatically or you manually exit the priming mode, the
system will automatically return to normal heating and filtering at the end of the priming mode. During
the priming mode, the heater is disabled to allow the priming process to be completed without the
possibility of energizing the heater under low-flow or no-flow conditions. Nothing comes on
automatically, but the pump(s) can be energized by pushing the “Jet” buttons.
If the spa has a Circ Pump, it can be activated by pressing the “Light” button during Priming Mode.
EXITING PRIMING MODE
You can manually exit Priming Mode by pressing a “Temp” button (Up or Down). Note that if you do not
manually exit the priming mode as described above, the priming mode will be automatically terminated
after 4-5 minutes. Be sure that the pump(s) have been primed by this time.
Once the system has exited Priming Mode, the top-side panel will momentarily display the set
temperature but the display will not show the temperature yet, as shown below. This is because the
system requires approximately 1 minute of water flowing through the heater to determine the water
temperature and display it.
PUMPS
Press the “Jets 1” button once to turn pump 1 on or off, and to shift between low- and high-speeds if
equipped.
If left running, the pump will turn off after a time-out period. The pump 1 low-speed will time out after
30 minutes. The high-speed will time out after 15 minutes.
On non-circ systems, the low-speed of pump 1 runs when the blower or any other pump is on. If the spa
is in Ready Mode, Pump 1 low may also activate for at least 1 minute every 30 minutes to detect the spa
temperature (polling) and then to heat to the set temperature if needed. When the low-speed turns on
automatically, it cannot be deactivated from the panel, however the high speed may be started.
Circulation Pump Modes
If the system is equipped with a circ pump, it will be configured to work in one of three different ways:
1, The circ pump operates continuously (24 hours) with the exception of turning off for 30 minutes at a
time when the water temperature reaches 3°F (1.5°C) above the set temperature (most likely to happen
in very hot climates).
2, The circ pump stays on continuously, regardless of water temperature.
3, A programmable circ pump will come on when the system is checking temperature (polling), during
filter cycles, during freeze conditions, or when another pump is on.
The specific Circulation Mode that is used has been determined by the Manufacturer and cannot be
changed in the field.
FILTRATION AND OZONE
On non-circ systems, Pump 1 low and the ozone generator (if there is one) will run during filtration. On
circ systems, the ozone will run with the circ pump.
The system is factory-programmed with two filter cycles that will run 10 minutes after power-up. The
filter duration is programmable.
At the start of each filter cycle, the blower (if there is one) or Pump 2 (if there is one) will run briefly to
purge its plumbing to maintain good water quality.
FREEZE PROTECTION
If the temperature sensors within the heater detect a low enough temperature, then the pump(s) and
the blower automatically activate to provide freeze protection. The pump(s) and blower will run either
continuously or periodically depending on conditions.
In colder climates, an optional additional freeze sensor may be added to protect against freeze
conditions that may not be sensed by the standard sensors. Auxiliary freeze sensor protection acts
similarly except with the temperature thresholds determined by the switch. See your dealer for details.
CLEAN-UP CYCLE (OPTIONAL)
When a pump or blower (if there is one) is turned on by a button press, a clean-up cycle begins 30
minutes after the pump or blower is turned off or times out. The pump and the ozone generator (if
there is one) will run for 30 minutes or more, depending on the system.
ADJUSTING THE SET TEMPERATURE
When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause
the temperature to flash. Pressing a temperature button again will adjust the set temperature in the
direction indicated on the button. When the LCD stops flashing, the spa will heat to the new set
temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to flash.
Pressing the button again will cause the temperature to change in one direction (e.g. UP). After allowing
the display to stop flashing, pressing the Temperature Button will cause the temperature to flash and
the next press will change the temperature in the opposite direction (e.g. DOWN).
The temperature can be set between 60°F and 104°F.
PRESS-AND-HOLD
If a Temperature button is pressed and held when the temperature is flashing, the temperature will
continue to change until the button is released. If only one temperature button is available and the limit
of the Temperature Range is reached when the button is being held, the progression will reverse
direction.
In order for the spa to heat, a pump needs to circulate water through the heater. The pump that
performs this function is known as the “heater pump.”
The heater pump can be either a 2-Speed Pump 1 or a circulation pump.
If the heater pump is a 2-Speed Pump 1, READY Mode will circulate water every 1/2 hour, using Pump 1
Low, in order to maintain a constant water temperature, heat as needed, and refresh the temperature
display. This is known as “polling.”
REST Mode will only allow heating during programmed filter cycles. Since polling does not occur, the
temperature display may not show a current temperature until the heater pump has been running for a
minute or two.
CIRCULATION MODE
If the spa is configured for 24HR circulation, the heater pump generally runs continuously. Since the
heater pump is always running, the spa will maintain set temperature and heat as needed in Ready
Mode, without polling.
In Rest Mode, the spa will only heat to set temperature during programmed filter times, even though
the water is being filtered constantly when in Circulation Mode.
REST Mode will not Poll and will only heat during filter cycles. The panel will not display a current temperature at all times.
The Main Screen will display RUN PUMP FOR TEMP if the filtration pump has not run for over 1 hour.
The Main Screen will display normally during Filter Cycles or when the spa is in use.
If the filtration pump has been off for an hour or more, when any function button, EXCEPT Light, is pressed on the panel, the pump used in
conjuncton with the heater will run so that temperature can be sensed and displayed.
READY-IN-REST MODE
READY/REST appears in the display if the spa is in Rest Mode and Jet 1 is pressed. It is assumed that the
spa is being used and will heat to set temperature. While Pump 1 High can be turned on and off, Pump 1
Low will run until set temperature is reached, or 1 hour has passed. After 1 hour, the System will revert
to Rest Mode. This mode can also be reset by entering the Mode Menu and changing the Mode.
FLIP (INVERT DISPLAY)
Note: Some panels may have a dedicated FLIP button, which allows the user to flip the display with a
single button-press. The FLIP menu/functionality depends on Manufacturer configuration and may not
be available. (Menu Style 1)
MAIN FILTRATION
Filter cycles are set using a duration. Each setting can be adjusted in 1-hour increments. Filter Cycle 1
and Filter Cycle 2 (if enabled) are set to the same duration.
If Filter Cycle 2 is enabled, Filter 12 will appear in the LCD. If Filter is disabled, Filter 1 will appear.
PURGE CYCLES
In order to maintain sanitary conditions, secondary Pumps and/or a Blower will purge water from their
respective plumbing by running briefly at the beginning of each filter cycle.
GENERAL MESSAGES
Priming Mode – M019
Each time the spa is powered up, it will enter Priming Mode. The purpose of Priming Mode is to allow
the user to run each pump and manually verify that the pumps are primed (air is purged) and water is
flowing. This typically requires observing the output of each pump separately, and is generally not
possible in normal operation. Priming Mode lasts 4 minutes, but you can exit it earlier by pressing any
Temp button. The heater is not allowed to run during Priming Mode.
NOTE: If your spa has a Circ Pump, it will turn on with Jets 1 in Priming Mode. The Circ Pump will run by
itself when Priming Mode is exited.
Water Temperature is Unknown
After the pump has been running for 1 minute, the temperature will be displayed.
Too Cold – Freeze Protection
A potential freeze condition has been detected, or the Aux Freeze Switch has closed, and all pumps and
blower are activated. All pumps and blower are ON for at least 4 minutes after the potential freeze
condition has ended, or when the aux freeze switch opens.
In some cases, pumps may turn on and off and the heater may operate during Freeze Protection.
This is an operational message, not an error indication.
Water is too Hot (OHS) – M029
One of the water temp sensors has detected spa water temp 110°F (43.3°C) and spa functions are
disabled. System will auto reset when the spa water temp is below 108°F (42.2°C). Check for extended
pump operation or high ambient temp.
Safety Trip - Pump Suction Blockage* – M033
The Safety Trip error message indicates that the vacuum switch has closed. This occurs when there has
been a suction problem or a possible entrapment situation avoided. (Note: not all spas have this
feature.)
* This message can be reset from the topside panel with any button press.
HEATER-RELATED MESSAGES
Heater Flow is Reduced (HFL) – M016
There may not be enough water flow through the heater to carry the heat away from the heating
element. Heater start up will begin again after about 1 min. See “Flow Related Checks” below.
Heater Flow is Reduced (LF)* – M017
There is not enough water flow through the heater to carry the heat away from the heating element and
the heater has been disabled. See “Flow Related Checks” below. After the problem has been resolved,
you must press any button to reset and begin heater start up.
Heater may be Dry (dr)* – M028
Possible dry heater, or not enough water in the heater to start it. The spa is shut down for 15 min. Press
any button to reset the heater start-up. See “Flow Related Checks” below.
Heater is Dry* – M027
There is not enough water in the heater to start it. The spa is shut down. After the problem has been
resolved, you must press any button to reset and restart heater start up. See “Flow Related Checks”
below.
Heater is too Hot (OHH)* – M030
One of the water temp sensors has detected 118°f (47.8°C) in the heater and the spa is shut down. You
must press any button to reset when water is below 108°f (42.2°C). See “Flow Related Checks” below.
A Reset Message may Appear with other Messages.
Some errors may require power to be removed and restored.
Flow-Related Checks
Check for low water level, suction flow restrictions, closed valves, trapped air, too many closed jets and
pump prime. On some systems even when spa is shut down, some equipment may occasionally turn on
to continue monitoring temperature or if freeze protection is needed.
* This message can be reset from the topside panel with any button press.
SENSOR-RELATED MESSAGES
Sensor Balance is Poor – M015
The temperature sensors MAY be out of sync by 2°F or 3°F. Call for Service.
Sensor Balance is Poor* – M026
The temperature sensors ARE out of sync. The Sensor Balance is Poor fault has been established for at
least 1 hour. Call for Service.
Sensor Failure – Sensor A: M031, Sensor B: M032
A temperature sensor or sensor circuit has failed. Call for Service.
MISCELLANEOUS MESSAGES
No Communications
The control panel is not receiving communication from the System. Call for Service.
Pre-Production Software
The Control System is operating with test software. Call for Service.
°F or °C is replaced by °T
The Control System is in Test Mode. Call for Service.
* This message can be reset from the topside panel with any button press.
SYSTEM-RELATED MESSAGES
Memory Failure - Checksum Error* – M022
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the
firmware (operation program) and requires a service call.
Memory Warning - Persistent Memory Reset* – M021
Appears after any system setup change. Contact your dealer or service organization if this message
appears on more than one power-up, or if it appears after the system has been running normally for a
period of time.
Memory Failure - Clock Error* – M020 - Not Applicable on the BP1500
Contact your dealer or service organization.
Configuration Error – Spa will not Start Up
Contact your dealer or service organization.
GFCI Failure - System Could Not Test/Trip the GFCI – M036
NORTH AMERICA ONLY. May indicate an unsafe installation. Contact your dealer or service organization.
A Pump Appears to be Stuck ON – M034
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or
service organization.
A Pump Appears to have been Stuck ON when spa was last powered – M035
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
* This message can be reset from the topside panel with any button press.
REMINDER MESSAGES
General maintenance helps
Reminder Messages can be suppressed by using the PREF Menu.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled entirely, or
there may be a limited number of reminders on a specific model.
The frequency of each reminder (i.e. 7 days) can be specifi ed by the Manufacturer.
Press a Temperature button to reset a displayed reminder message.
Appears on a regular schedule, e.g. every 7 days.
Check pH with a test kit and adjust pH with the appropriate chemicals.
Alternates with temperature or normal display.
Appears on a regular schedule, e.g. every 7 days.
Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate
chemicals.
Alternates with temperature or normal display.
Appears on a regular schedule, e.g. every 30 days.
Clean the filter media as instructed by the manufacturer.
Alternates with temperature or normal display.
Appears on a regular schedule, e.g. every 30 days.
The Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD) is an important safety
device and must be tested on a regular basis to verify its reliability.
Every user should be trained to safely test the GFCI or RCD associated with the hot tub installation.
A GFCI or RCD will have a TEST and RESET button on it that allows a user to verify proper function.
Alternates with temperature or normal display.
Warning:
If freezing conditions exist, a GFCI or RCD should be reset immediately or spa damage could result.
The end user should always trained to test and reset the GFCI or RCD on a regular basis.
Appears on a regular schedule, e.g. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary
conditions.
Alternates with temperature or normal display.
Appears on a regular schedule, e.g. every 180 days.
Vinyl covers should be cleaned and conditioned for maximum life.
Alternates with temperature or normal display.
Appears on a regular schedule, e.g. every 180 days.
Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for
maximum life.
Alternates with temperature or normal display.
Appears on a regular schedule, e.g. every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
Alternates with temperature or normal display.
As needed.
Install new mineral cartridge
Alternates with temperature or normal display.
Elbrus Deluxe Spa system
BALBOA TP800
HOT TUB Control panel
Main screen
SPA STATUS
Important information about spa operation can be seen quickly from the Main Screen.
The most important features, including Set Temperature adjustment, can be accessed from this screen.
The actual water temperature can be seen in large text and the desired, or Set Temperature, can be
selected and adjusted.
Time-of-day, Ozone operation and Filter Operation status is available, along with other messages and
alerts.
High Temperature Range vs. Low Temperature Range is indicated in the upper right corner.
The Jets Icon in the center will spin on a TP900 if any pump is running and changes color when the
heater is on. (The icon does not spin on a TP800, but still indicates pump and heater function.)
A Lock icon is visible if the panel or settings are locked.
The Menu choices on the right can be selected and the screen will change to show more detailed
controls or programming functions.
NAVIGATION
Navigating the entire menu structure is done with the 5 buttons on the control panel.
When a text item changes to white during navigation, that indicates the item is selected for action.
Operating or changing a selected item is generally done with the center or “Select” button.
The only item that can be changed on the left side of the Main Screen is the Set Temperature. Press the
Left Arrow button to change the Set Temperature number to white. The Set Temperature can then be
adjusted with the up and down buttons.
Pressing the Select button or the Right Arrow button will save the new set temperature.
On the right side of the screen, the menu selections can be selected with the Up and Down Buttons. Use
the Select Button to choose an item. Selecting one of these items will change to a different screen with
additional controls.
MESSAGES
At the bottom of the screen, messages may appear at various times. Some of these messages must be
dismissed by the user.
PRESS-AND-HOLD
If an Up or Down button is pressed and held when the Set Temperature is selected, the temperature will
continue to change until the button is released, or the Temperature Range limits are reached.
The Spa Screen shows all available equipment to control, as well as other features, like Invert, in one
easy-to-navigate screen. The display shows icons that are related to the equipment installed on a
particular spa model, so this screen may change depending on the installation.
The navigation buttons are used to select an individual device. The device that is chosen is highlighted
with a white outline and the text under the icon changes to white. Once a device is selected, it can be
controlled using the center Select Button.
Some devices, like pumps, may have more than one ON state, so the icon will change to refl ect the
state that the
equipment is in. Below are some examples of 2-speed Pump indicators.
If the Spa has a Circ Pump, a Circ Pump Icon will appear to indicate its activity, but outside of Priming
Mode, the Circ Pump cannot be controlled directly.
NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low) will have a red glow in
the center when the heater is running.
ON-PRESS ACTIVATION
The Shortcut Screen requires no navigation. Each button is fi xed on a specifi c fuction and can be used
as a very simple user interface for the spa.
Each button function is illustrated in the display and mapped according to the manufacturer’s
instructions.
PRESSING A „BUTTON”
When instructions are given to “press a button” any of the following can be done:
 Navigate to the desired item on any Screen. When the desired item is highlighted, press the
Select Button.
 Press the button for that device while on the Shortcuts Screen, if the device is one of the 4
functions available.
PROGRAMMING, ETC.
The Settings Screen is where all programming and other spa behaviors are controlled.
This screen has several features that can be acted on directly. These features include Temp Range, Heat
Mode, and Invert Panel. When one of these items is highlighted, the Select Button is used to toggle
between two settings. All other menu items (with an arrow pointing to the right) go to another level in
the menu.
PRESS-AND-HOLD
If an Up or Down button is pressed and held when an item in a Menu List is highlighted, the list can be
scrolled quickly from top to bottom. The scroll bar on the right side of the screen indicates the relative
position of the highlighted item in the list.
DUAL TEMPERATURE RANGES (HIGH VS. LOW)
This system incorporates two temperature range settings with independent set temperatures. The
specific range can be selected on the Settings screen and is visible on the Main Screen in the upper right
corner of the display.
These ranges can be used for various reasons, with a common use being a “ready to use” setting vs. a
“vacation” setting.
Each range maintains its own set temperature as programmed by the user. This way, when a range is
chosen, the spa will heat to the set temperature associated with that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
More specific Temp Ranges may be determined by the Manufacturer.
Freeze Protection is active in either range.
HEAT MODE – READY VS. REST
In order for the spa to heat, a pump needs to circulate water through the heater. The pump that
performs this function is known as the “heater pump.”
The heater pump can be either a 2-speed pump (Pump 1) or a circulation pump.
If the heater pump is a 2-Speed Pump 1, READY Mode will circulate water every 1/2 hour, using Pump 1
Low, in order to maintain a constant water temperature, heat as needed, and refresh the temperature
display. This is known as “polling.”
REST Mode will only allow heating during programmed filter cycles. Since polling does not occur, the
temperature display may not show a current temperature until the heater pump has been running for a
minute or two. While Pump 1 High can be turned on and off, Pump 1 Low will run until set temperature
is reached, or 1 hour has passed.
Circulation Mode
If the spa is configured for 24HR circulation, the heater pump generally runs continuously. Since the
heater pump is always running, the spa will maintain set temperature and heat as needed in Ready
Mode, without polling.
In Rest Mode, the spa will only heat to set temperature during programmed filter times, even though
the water is being filtered constantly when in Circulation Mode.
READY-IN-REST MODE
READY/REST appears in the display if the spa is in Rest Mode and the Jets 1 Button is pressed. It is
assumed that the spa is being used and will heat to set temperature. While Pump 1 High can be turned
on and off, Pump 1 Low will run until set temperature is reached, or 1 hour has passed. After 1 hour, the
System will revert to Rest Mode. This mode can also be reset by entering the Settings Menu and
changing the Heat Mode.
PREPARATION AND FILLING
Fill the spa to its correct operating level. Be sure to open all valves and jets in the plumbing system before filling
to allow as much air as possible to escape from the plumbing and the control system during the fi lling process.
After turning the power on at the main power panel, the top-side panel will display a splash, or startup screen.
PRIMING MODE – M019*
After the initial start-up sequence, the control will enter Priming Mode and display a Priming Mode
screen. Only pump icons appear on the priming mode screen. The system will automatically return to
normal heating and filtering at the end of the priming mode, which lasts 4-5 minutes. During the priming
mode, the heater is disabled to allow the priming process to be completed without the possibility of
energizing the heater under low-flow or no-flow conditions. Nothing comes on automatically, but the
pump(s) can be energized by selecting the “Jet” buttons. If the spa has a Circ Pump, it can be turned on
and off by pressing the “Circ Pump” button during Priming Mode. In addition, if the spa has a Circ Pump,
it can be activated by pressing the dedicated “Light” button during Priming Mode when using a TP800.
Manually exit Priming Mode by pressing the “Exit” Button.
PRIMING THE PUMPS
As soon as the Priming Mode screeen appears on the panel, select the “Jets 1” button once to start
Pump 1 in low-speed and then again to switch to high-speed. Also, select the other pumps, to turn them
on. The pumps should be running in high-speed to facilitate priming. If the pumps have not primed after
2 minutes, and water is not flowing from the jets in the spa, do not allow the pumps to continue to run.
Turn off the pumps and repeat the process. Note: Turning the power off and back on again will initiate a
new pump priming session. Sometimes momentarily turning the pump off and on will help it to prime.
Do not do this more than 5 times. If the pump(s) will not prime, shut off the power to the spa and call
for service.
Important: A pump should not be allowed to run without priming for more than 2 minutes. Under NO
circumstances should a pump be allowed to run without priming beyond the end of the 4-5 minute
priming mode. Doing so may cause damage to the pump and cause the system to energize the heater
and go into an overheat condition.
EXITING PRIMING MODE
You can manually exit Priming Mode by navigating to the “Back” button on the Priming Mode Screen.
Note that if you do not manually exit the priming mode as described above, the priming mode will be
automatically terminated after 4-5 minutes. Be sure that the pump(s) have been primed by this time.
Once the system has exited Priming Mode, the top-side panel will display the Main Screen, but the
display will not show the temperature yet, as shown below. This is because the system requires
approximately 1 minute of water flowing through the heater to determine the water temperature and
display it.
PUMPS
On the Spa Screen, select a “Jets” button once to turn the pump on or off, and to shift between low- and
high-speeds if equipped. If left running, the pump will turn off after a time-out period. The pump 1 lowspeed will time out after 30 minutes. The high-speed will time-out after 15 minutes.
On non-circ systems, the low-speed of pump 1 runs when the blower or any other pump is on. If the spa
is in Ready Mode, Pump 1 low may also activate for at least 1 minute every 30 minutes to detect the spa
temperature (polling) and then to heat to the set temperature if needed. When the low-speed turns on
automatically, it cannot be deactivated from the panel, however the high speed may be started.
Circulation Pump Modes
If the system is equipped with a circ pump, it will be configured to work in one of three different ways:
1. The circ pump operates continuously (24 hours) with the exception of turning off for 30 minutes
at a time when the water temperature reaches 3°F (1.5°C) above the set temperature (most
likely to happen in very hot climates).
2. The circ pump stays on continuously, regardless of water temperature.
3. A programmable circ pump will come on when the system is checking temperature (polling),
during filter cycles, during freeze conditions, or when another pump is on.
The specific Circulation Mode that is used has been determined by the Manufacturer and cannot be
changed in the field. Other device options may be available, like Blower, Light, Mist, etc.
FILTRATION AND OZONE
On non-circ systems, Pump 1 low and the ozone generator (if installed) will run during filtration. On circ
systems, the ozone will generally run with the circ pump, but can be limited to filtration cycles.
The system is factory-programmed with one filter cycle that will run in the evening (assuming the timeof-day is properly set) when energy rates are often lower. The filter time and duration are
programmable. A second filter cycle can be enabled as needed.
At the start of each filter cycle, the water devices like blower, mist device (if these exist) and other
pumps will run briefly to purge the plumbing to maintain good water quality.
FREEZE PROTECTION
If the temperature sensors within the heater detect a low enough temperature, then the water devices
automatically activate to provide freeze protection. The water devices will run either continuously or
periodically depending on conditions.
In colder climates, an optional additional freeze sensor may be added to protect against freeze
conditions that may not be sensed by the standard sensors. Auxiliary freeze sensor protection acts
similarly except with the temperature thresholds determined by the switch. See your dealer for details.
CLEAN-UP CYCLE (OPTIONAL)
When a pump or blower is turned on by a button press, a clean-up cycle begins 30 minutes after the
pump or blower is turned off or times out. The pump and the ozone generator (if installed) will run for
30 minutes or more, depending on the system. On some systems, you can change this setting.
BE SURE TO SET THE TIME-OF-DAY
Setting the time-of-day is important for determining filtration times and other background features. “Set
Time” will appear on the display if no time-of-day is set in the memory. On the Settings Screen, select
the Time-of-Day line. On the Time-of-Day screen, simply navigate right and left to select the Hour,
Minutes, AM/PM and 12/24 Hour segments. Use the Up and Down Buttons to make changes.
SAVING SETTINGS
The Time-of-Day screen is a simple, editable screen that illustrates a feature of the control that applies
to all other editable screens as well.
When changes are made, the icon to go “Back” changes to “Save” and a new icon for “Cancel” appears
under the Save icon. Navigating to the left will highlight the Save icon, and navigating down from there
will allow the user to cancel the pending change. Pressing the “Select” button will save or cancel the
changes and go back to the previous screen.
Note: If power is interrupted to the system, Time-of-Day will be maintained for several days.
MAIN FILTRATION
Using the same navigation and adjustment as Setting the Time, Filter Cycles are set using a start time
and a duration. Each setting can be adjusted in 15-minute increments. The panel calculates the end time
and displays it automatically.
FILTER CYCLE 2 – OPTIONAL FILTRATION
Filter Cycle 2 is OFF by default.
Simply navigate to the Filter Cycle 2 line by pressing the Right Navigation Button, and when “NO” is
highlighted, press Up or Down to toggle Filter Cycle 2 on and off. When Filter Cycle 2 is ON, it can be
adjusted in the same manner as Filter Cycle 1 by navigating to the right.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall fi ltration by the
overlap amount.
CIRCULATION PUMP MODES
Some spas may be manufactured with Circ Pump settings that allow programming filtration cycle
duration. Some circ Modes are pre-programmed to operate 24 hours a day and are not programmable.
Refer to the spa manufacturer’s documentation for any Circ Mode details.
PURGE CYCLES
In order to maintain sanitary conditions, as well as protect against freezing, secondary water devices will
purge water from their respective plumbing by running briefly at the beginning of each filter cycle. If the
Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate a purge when Filter Cycle 2
is programmed to begin.
LIGHT CYCLE OPTION
If Light Cycle does not appear in the Settings Menu, the Light Timer feature is not enabled by the
manufacturer. When available, the Light Timer is OFF by default. The settings can be edited the same
way that Filter Cycles are edited.
INVERT PANEL
Selecting Invert Panel will flip the display and the buttons so the panel can be easily operated from
inside or outside the hot tub.
SPECIFIC BUTTONS FOR SPECIFIC DEVICES
If the panel has dedicated function buttons (TP800) or the spa has an Auxiliary Panel(s) installed,
pressing those buttons will activate the device indicated for that button.
These dedicated buttons will operate just like the Spa Screen buttons and the equipment will behave in
the same manner with each button press.
RESTRICTING OPERATION
The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the Panel prevents the controller from being used, but all automatic functions are still active.
Locking the Settings allows Jets and other features to be used, but the Set Temperature and other
programmed settings cannot be adjusted. Settings Lock allows access to a reduced selection of menu
items. These include Set Temperature, Invert, Lock, Utilities, Information and Fault Log. They can be
seen, but not changed or edited.
UNLOCKING
An Unlock Sequence using the navigation buttons can be used from the Lock Screen. The Unlock
Sequence is the same for both Panel Lock and Settings Lock.
HOLD MODE - M037*
Hold Mode is used to disable the pumps during service functions like cleaning or replacing the filter.
Hold Mode will last for 1 hour unless the mode is exited manually. If spa service will require more than
an hour, it may be best to simply shut down power to the spa.
*M036 is a Message Code. Codes like this will be seen in the Fault Log
DRAIN MODE
Some spas have a special feature that allows Pump 1 to be employed when draining the water. When
available, this feature is a component of Hold Mode.
UTILITIES
The Utilities Menu contains the following:

A/B Temps: When this is set to On, the temperature display will alternate to display temperature
from Sensor A and Sensor B in the heater.



Demo Mode: Demo Mode is not always enabled, so it may not appear. This is designed to
operate several devices in a sequence in order to demonstrate the various features of a
particular hot tub.
Fault Log: The Fault Log is a record of the last 24 faults that can be reviewed by a service tech.
GFCI Test (Feature not available on CE rated systems.): GFCI Test is not always enabled, so it
may not appear. This screen allows the GFCI to be tested manually from the panel and can be
used to reset the automatic test feature. If the GFCI Test Feature is reset, the device will trip
within 7 days.
PREFERENCES
The Preferences Menu allows the user to change certain parameters based on personal preference.
 Temp Display: Change the temperature between Fahrenheit and Celsius.
 Time Display: Change the clock between 12 hr and 24 hr display.
 Reminders: Turn the reminder messages (like “Clean Filter”) On or Off.
 Cleanup: Cleanup Cycle Duration is not always enabled, so it may not appear. When it is
available, set the length of time Pump 1 will run after each use. 0-4 hours are available.
 Dolphin II and Dolphin III (Applies to RF Dolphin only): When set to 0, no addressing is used. Use
this setting for a Dolphin II or Dolphin III which is factory set for no address by default. When set
between 1 and 7, the number is the address. (See the Dolphin manual for details.)
 Color: Pressing the Select Button when Color is highlighted will cycle through 5 background
colors available in the control.
 Language: Change the language displayed on the panel.
SYTEM INFORMATION
The System Information Menu displays various settings and identification of the particular system. As
each item in the menu is highlighted, the detail for that item is displayed at the bottom of the screen.









Software ID (SSID): Displays the software ID number for the System.
System Model: Displays the Model Number of the System.
Current Setup: Displays the currently selected Configuration Setup Number.
Configuration Signature: Displays the checksum for the system configuration file.
Heater Voltage (Feature not used on CE rated systems.): Displays the operating voltage
configured for the heater.
Heater Wattage as Confi gured in Software (CE Systems Only.): Displays a heater kilowatt rating
as programmed into the control system software (1-3 or 3-6).
Heater Type: Displays a heater type ID number.
Dip Switch Settings: Displays a number that represents the DIP switch positions of S1 on the
main circuit board.
Panel Version: Displays a number of the software in the topside control panel.
UTILITIES – GFCI TEST FEATURE
The Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD) is an important safety
device and is required equipment on a hot tub installation. (The GFCI Test Feature is not available on CE
rated systems.) Used for verifying a proper installation.
Your spa may be equipped with a GFCI Protection feature. If your spa has this feature enabled by the
manufacturer, the GFCI Trip Test must occur to allow proper spa function. Within 1 to 7 days after
startup, the spa will trip the GFCI to test it. (The number of days is factory programmed.) The GFCI must
be reset once it has tripped. After passing the GFCI Trip Test, any subsequent GFCI trips will indicate a
ground fault or other unsafe condition and the power to the spa must be shut off until a service person
can correct the problem.
Warning:
The end-user must be trained to expect this one-time test to occur and how to properly reset the GFCI.
If freezing conditions exist, the GFCI or RCD should be reset immediately or spa damage could result.
CE Product:
CE registered systems do not have an RCD Test Feature due to the nature of the electrical service. Some
UL registered systems do not have the GFCI Test Feature activated. The end-user must be trained how
to properly test and reset the RCD.
GENERAL MESSAGES
Most messages and alerts will appear at the bottom of the normally used screens. Several alerts and
messages may be displayed in a sequence. Some messages can be reset from the panel. Messages that
can be reset will appear with a “right arrow” at the end of the message. This message can be selected by
navigating to it at pressing the Select button.
WATER TEMPERATURE IS UNKNOWN
After the pump has been running for 1 minute, the temperature will be displayed.
POSSIBLE FREEZING CONDITION
A potential freeze condition has been detected, or the Aux Freeze Switch has closed. All water devices
are activated. In some cases, pumps may turn on and off and the heater may operate during Freeze
Protection. This is an operational message, not an error indication.
THE WATER IS TOO HOT – M029
The system has detected a spa water temp of 110°F (43.3°C) or more, and spa functions are disabled.
System will auto reset when the spa water temp is below 108°F (42.2°C). Check for extended pump
operation or high ambient temp.
M0XX numbers are Message Codes.
*This message can be reset from the topside panel.
HEATER RELATED MESSAGES
The water flow is low – M016
There may not be enough water flow through the heater to carry the heat away from the heating
element. Heater start up will begin again after about 1 min. See “Flow Related Checks” below.
The water flow has failed* – M017
There is not enough water flow through the heater to carry the heat away from the heating element and
the heater has been disabled. See “Flow Related Checks” below. After the problem has been resolved,
you must press any button to reset and begin heater start up.
The heater may be dry* – M028
Possible dry heater, or not enough water in the heater to start it. The spa is shut down for 15 min. Press
any button to reset the heater start-up. See “Flow Related Checks” below.
The heater is dry* – M027
There is not enough water in the heater to start it. The spa is shut down. After the problem has been
resolved, you must clear the message to restart heater start up. See “Flow Related Checks” below.
The heater is too hot* – M030
One of the water temp sensors has detected 118°f (47.8°C) in the heater and the spa is shut down. You
must clear the message when water is below 108°f (42.2°C). See “Flow Related Checks” below.
Flow-Related Checks
Check for low water level, suction flow restrictions, closed valves, trapped air, too many closed jets and
pump prime. On some systems, even when spa is shut down by an error condition, some equipment
may occasionally turn on to continue monitoring temperature or if freeze protection is needed.
M0XX numbers are Message Codes.
*This message can be reset from the topside panel.
SENSOR RELATED MESSAGES
Sensors are out of sync – M015
The temperature sensors MAY be out of sync by 2°F or 3°F. Call for Service.
Sensors are out of sync -- Call for service* – M026
The temperature sensors ARE out of sync. The fault above has been established for at least 1 hour. Call
for Service.
Sensor A Fault, Senor B Fault – Sensor A: M031, Sensor B: M032
A temperature sensor or sensor circuit has failed. Call for Service.
MISCELLANEOUS MESSAGES
Communications error
The control panel is not receiving communication from the System. Call for Service.
Test software installed
The Control System is operating with test software. Call for Service.
°F or °C is replaced by °T
The Control System is in Test Mode. Call for Service.
M0XX numbers are Message Codes.
*This message can be reset from the topside panel.
SYSTEM RELATED MESSAGES
Program memory failure* – M022
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the
firmware (operation program) and requires a service call.
The clock has failed* – M020
Contact your dealer or service organization.
Hot fault – M035
A Pump Appears to have been Stuck ON when spa was last powered.
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
REMINDER MESSAGES
General maintenance helps
Reminder Messages can be suppressed by using the Preferences Menu. Reminder Messages can be
chosen individually by the Manufacturer. They may be disabled entirely, or there may be a limited
number of reminders on a specific model. The frequency of each reminder (i.e. 7 days) can be specified
by the Manufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days. Check pH with a test kit and adjust pH with the
appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days. Check sanitizer level and other water chemistry
with a test kit and adjust with the appropriate chemicals.
Clean the filter
May appear on a regular schedule, i.e. every 30 days. Clean the filter media as instructed by the
manufacturer.
Test the GFCI (or RCD)
May appear on a regular schedule, i.e. every 30 days. The GFCI or RCD is an important safety device and
must be tested on a regular basis to verify its reliability. Every user should be trained to safely test the
GFCI or RCD associated with the hot tub installation. A GFCI or RCD will have a TEST and RESET button
on it that allows a user to verify proper function.
Change the water
May appear on a regular schedule, i.e. every 90 days. Change the water in the spa on regular basis to
maintain proper chemical balance and sanitary conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days. Vinyl covers should be cleaned and conditioned
for maximum life.
Treat the wood
May appear on a regular schedule, i.e. every 180 days. Wood skirting and furniture should be cleaned
and conditioned per the manufacturers instructions for maximum life.
Change the filter
May appear on a regular schedule, i.e. every 365 days. Filters should be replaced occasionally to
maintain proper spa function and sanitary conditions.
Reminder messages can be reset from the topside panel.
Additional messages may appear on specific systems.
Elbrus Premium Spa system
spaTouch™ Menued Control Panels
Balboa Water Group BP Series Systems
User Interface and Programming Reference
The spaTouch™ menued panel is compatible with all BP systems that already support the TP800 and/or the TP900.
If this panel is used with a system that supports only the TP400 and/or TP600, many screens will work correctly,
but the spa screen will not display correctly and may not control all of your equipment.
ge
an
R
h
g
Hi
Spa
nes
e
c
S
gs
n
i
t
t
Se
F
°
02
1
4°F
0
1
:
Set PM
8:32 ne
Ozo r 1
Filte
e
d
o
M
st
e
nR
i
y
d
Rea ing
t
Hea
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
The Main Screen
Spa Status
Important information about spa operation can be seen on the Main Screen.
Most features, including Set Temperature adjustment, can be accessed from this screen.
The actual water temperature and Set Temperature can be seen, and the Set Temperature can be adjusted (see page 4).
Time-of-Day, Ozone and Filter status is available, along with other messages and alerts.
The selected Temperature Range is indicated in the upper right corner.
The Jets Icon in the center will spin if any pump is running and changes color when the heater is on.
A Lock icon is visible if the panel or settings are locked.
The Menu choices on the right can be selected and the screen will change to show more detailed controls or programming
functions.
Water Temperature
Desired Temperature
Temperature Range
Pump and Heat
Status
102°F
Set: 104°F
8:32 PM
Ozone
Filter 1
High Range
Spa
Scenes
Settings
Ready in Rest Mode
Heating
Messages
Menus
Lock Indicator
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
The Main Screen
Navigation
Navigating the entire menu structure is done by touching the screen.
When a text item is shown in white on the main screen, it is selectable.
The menu selections on the right side of the screen can be selected. Select one of these to enter
a different screen with additional controls.
Most menu screens time out and revert to the main screen after 30 seconds of no activity.
102°F
Set: 104°F
8:32 PM
Ozone
Filter 1
High Range
Spa
Scenes
Settings
Ready in Rest Mode
Heating
The only item that can be changed on the left side of the Main Screen is the Set Temperature. Touch either
the set temperature line or the water temperature to go to the Set Temperature screen. See next page.
Messages
At the bottom of the screen, messages may appear at various times. Some of these messages must be dismissed by the
user (see pages 22-26).
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
BP1500
The
Set Temperature
Tech Sheet Screen
Power Requirements (D):
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
Set Temperature
Set:
Inc
101°F
Dec
High Range
Back
Set Temperature
Press Inc or Dec to modify the Set Temperature. The Set Temperature changes immediately. Press Back to return to
the Main Screen.
If you need to switch between high range and low range you need to go to the Settings Screen.
Press-and-Hold
If the Up or Down button is pressed and held, the temperature will continue to change until the button is released,
or the Temperature Range limits are reached.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
The Spa Screen
All Equipment Access
The Spa Screen shows all available equipment to control, as well as other features, like Invert. The display shows icons that
are related to the equipment installed on a particular spa model, so this screen may change depending on the installation.
The icon buttons are used to select and control individual devices.
Some devices, like pumps, may have more than one ON state, so the icon will change to reflect the state that the
equipment is in. Below are some examples of 2-speed Pump indicators.
Jets Off
Jets Low
Jets High
If the Spa has a Circ Pump, a Circ Pump Icon will appear to indicate its activity, but outside of Priming Mode, the Circ Pump
cannot be controlled directly.
NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low) will have a red glow in the center when the
heater is running.
Back
Jets 1
Jets 2
Jets 3
Light
Invert
Ready in Rest Mode
Heating
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Common Buttons
Exiting Screens
When you see both of these buttons, whether they are labeled or not, they always mean Save and Cancel.
They appear on most editing screens once you have changed the value on that screen.
Time of Day
Save
12 :00
10:
05 PM
PM
12 HR
Save
Back
Cancel
Cancel
Time of Day
Save
12 :00
10:
05 PM
PM
12 HR
Save
Back
Cancel
Cancel
If the screen times out due to no activity it will act like Cancel.
When you see only this button, whether it is labeled or not, it means Back or Exit. It appears on editing screens
before you have changed any value, as well as on all other screens.
Time of Day
Back
12 :00 PM
12 HR
Back
Time of Day
Back
12 :00 PM
12 HR
Back
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Common Buttons – Continued
Page Up/Down
If an Up or Down button is shown and pressed when in a Menu List, the list can be scrolled a page at a time.
The scroll bar on the right side of the screen indicates the relative position of the page.
Settings
Back
Page Up
Temp Range High
Ready
Heat Mode
Time of Day 䊳
Filter Cycles 䊳
Light Cycle 䊳
Invert Panel Normal
Lock
䊳
Page Down
Values Increment/Decrement
If an Up or Down button is shown and pressed when on an editing page, and a value has been selected (highlighted),
the value can be incremented by pressing the up arrow or decremented by pressing the down arrow.
Selected Value
Time of Day
Save
10:05 PM
12 HR
Back
Cancel
Increment
Decrement
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
The Settings Screen
Programming, Etc.
The Settings Screen is where all programming and other spa behaviors are controlled.
This screen has several features that can be acted on directly. These features may include Temp Range, Heat Mode, Hold,
and Invert Panel. When one of these items is selected, it will toggle between two settings.
All other menu items (with an arrow pointing to the right) go to another level in the menu.
Settings
Back
Temp Range High
Ready
Heat Mode
Time of Day 䊳
Filter Cycles 䊳
Light Cycle 䊳
Invert Panel Normal
Lock
䊳
Dual Temperature Ranges (High vs. Low)
This system incorporates two temperature range settings with independent set temperatures. The specific range can be
selected on the Settings screen and is visible on the Main Screen in the upper right corner of the display.
These ranges can be used for various reasons, with a common use being a “ready to use” setting vs. a “vacation” setting.
Each range maintains its own set temperature as programmed by the user. This way, when a range is chosen, the spa will
heat to the set temperature associated with that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
More specific Temp Ranges may be determined by the Manufacturer.
Freeze Protection is active in either range.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
The Settings Screen – Continued
Heat Mode – Ready vs. Rest
In order for the spa to heat, a pump needs to circulate water through the heater. The pump that performs this function is
known as the “heater pump.”
The heater pump can be either a 2-speed pump (Pump 1) or a circulation pump.
If the heater pump is a 2-Speed Pump 1, Ready Mode will circulate water every 1/2 hour, using Pump 1 Low, in order to
maintain a constant water temperature, heat as needed, and refresh the temperature display. This is known as “polling.”
Rest Mode will only allow heating during programmed filter cycles. Since polling does not occur, the temperature display
may not show a current temperature until the heater pump has been running for a minute or two.
When the heater pump has come on automatically (for example for heating) you can switch between low speed and high
speed but you cannot turn the heater pump off.
Circulation Mode (See Page 11, under Pumps, for other circulation modes)
If the spa is configured for 24HR circulation, the heater pump generally runs continuously. Since the heater pump is always
running, the spa will maintain set temperature and heat as needed in Ready Mode, without polling.
In Rest Mode, the spa will only heat to set temperature during programmed filter times, even though the water is being
filtered constantly when in 24HR circulation mode.
Settings
Back
Temp Range High
Ready
Heat Mode
Time of Day 䊳
Filter Cycles 䊳
Light Cycle 䊳
Invert Panel Normal
Lock
䊳
Ready-in-Rest Mode
Ready in Rest Mode appears in the display if the spa is in Rest Mode and the Jets 1 Button is pressed. When the heater
pump has come on automatically (for example for heating) you can switch between low speed and high speed but you
cannot turn the heater pump off. After 1 hour, the System will revert to Rest Mode. This mode can also be reset by entering
the Settings Menu and selecting the Heat Mode line.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Fill it up!
Preparation and Filling
Fill the spa to its correct operating level. Be sure to open all valves and jets in the plumbing system before filling to allow
as much air as possible to escape from the plumbing and the control system during the filling process.
After turning the power on at the main power panel, the top-side panel will display a splash screen or startup screen.
Priming Mode – M019*
After the initial start-up sequence, the control will enter Priming Mode and display a Priming Mode screen. Only pump icons
appear on the priming mode screen. During the priming mode, the heater is disabled to allow the priming process to be
completed without the possibility of energizing the heater under low-flow or no-flow conditions. Nothing comes on automatically, but the pump(s) can be energized by selecting the “Jet” buttons. If the spa has a Circ Pump, it can be turned on
and off by pressing the “Circ Pump” button during Priming Mode.
Priming the Pumps
As soon as the Priming Mode screeen appears on the panel, select the
“Jets 1” button once to start Pump 1 in low-speed and then again to
switch to high-speed. Also, select the other pumps, to turn them on.
The pumps should be running in high-speed to facilitate priming. If
the pumps have not primed after 2 minutes, and water is not flowing
from the jets in the spa, do not allow the pumps to continue to run.
Turn off the pumps and repeat the process. Note: Turning the power off
and back on again will initiate a new pump priming session. Sometimes
momentarily turning the pump off and on will help it to prime. Do not
do this more than 5 times. If the pump(s) will not prime, shut off the
power to the spa and call for service.
Exit
Jets 1
Jets 2
Jets 3
Circ
Priming Mode
Important: A pump should not be allowed to run without priming for more than 2 minutes. Under NO circumstances should
a pump be allowed to run without priming beyond the end of the 4-5 minute priming mode. Doing so may cause damage to
the pump and cause the system to energize the heater and go into an overheat condition.
Exiting Priming Mode
The system will automatically enter the normal heating and filtering at the end of the priming mode, which lasts 4-5
minutes.
You can manually exit Priming Mode by pressing the “Exit” button on the Priming Mode Screen. Note that if you do not
manually exit the priming mode as described above, the priming mode will be automatically terminated after 4-5 minutes.
Be sure that the pump(s) have been primed by this time.
Once the system has exited Priming Mode, the top-side panel will display the Main Screen, but the display will not show the
temperature yet, as shown below. This is because the system requires approximately 1 minute of water flowing through the
heater to determine the water temperature and display it.
– – –°F
– – –°C
*M0XX is a Message Code. See Fault Log on Page 17.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Spa Behavior
Pumps
On the Spa Screen, select a “Jets” button once to turn the pump on or off, and to shift between low- and high-speeds if
equipped. If left running, the pump will turn off after a time-out period.
Non-Circ Systems
The low-speed of pump 1 runs when the blower or any other pump is on. If the spa is in Ready Mode (See page 9), Pump 1
low may also activate for at least 1 minute every 30 minutes to detect the spa temperature (polling) and then to heat to
the set temperature if needed. When the low-speed turns on automatically, it cannot be deactivated from the panel, however the high speed may be started.
Circulation Pump Modes
If the system is equipped with a circ pump, it will be configured to work in one of three different ways:
1, The circ pump operates continuously (24 hours) with the exception of turning off for 30 minutes at a time when the
water temperature reaches 3°F (1.5°C) above the set temperature (most likely to happen in very hot climates).
2, The circ pump stays on continuously, regardless of water temperature.
3, A programmable circ pump will come on when the system is checking temperature (polling), during filter cycles, during
freeze conditions, or when another pump is on.
The specific Circulation Mode that is used has been determined by the Manufacturer and cannot be changed in the field.
Other device options may be available, like Blower, Light, Mister, etc.
Filtration and Ozone
On non-circ systems, Pump 1 low and the ozone generator will run during filtration. On circ systems, the ozone will generally run with the circ pump, but can be limited to filtration cycles.
The system is factory-programmed with one filter cycle that will run in the evening (assuming the time-of-day is properly
set) when energy rates are often lower. The filter time and duration are programmable. (See page 13)
A second filter cycle can be enabled as needed.
At the start of each filter cycle, the water devices like blower, mister device (if these exist) and other pumps will run briefly
to purge the plumbing to maintain good water quality.
Freeze Protection
If the temperature sensors within the heater detect a low enough temperature, then the water devices automatically activate to provide freeze protection. The water devices will run either continuously or periodically depending on conditions.
In colder climates, an optional freeze sensor may be added to protect against freeze conditions that may not be sensed by
the standard sensors. Auxiliary freeze sensor protection acts similarly except with the temperature thresholds determined by
the switch. See your dealer for details.
Clean-up Cycle (optional)
When a pump or blower is turned on by a button press, a clean-up cycle begins 30 minutes after the pump or blower is
turned off or times out. The pump and the ozone generator will run for 30 minutes or more, depending on the system. On
some systems, you can change this setting. (See the Preferences section on page 18)
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Time-of-Day
Be sure to set the Time-of-Day
Setting the time-of-day is important for determining filtration times and other background features.
“Set Time” will appear on the display if no time-of-day is set in the memory.
On the Settings Screen, select the Time-of-Day line. On the Time-of-Day screen, simply select the Hour, Minutes,
and 12/24 Hour segments. Use the Up and Down Buttons to make changes.
Time of Day
12 :00 PM
12 HR
Back
Note:
This only applies to some systems:
If power is interrupted to the system, Time-of-Day will be maintained for several days.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Adjusting Filtration
Main Filtration
Using the same adjustment as Setting the Time, Filter Cycles are set using a start time and a duration. Each setting
can be adjusted in 15-minute increments. The panel calculates the end time and displays it automatically.
Filter Cycles
Back
Filter Cycle 1
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Filter Cycle 2 No
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Filter Cycles
Save
Back
Cancel
Filter Cycle 1
Starts at 6:15 AM
Runs 3 HR 0 Min
Ends at 9:15 AM
Filter Cycle 2 No
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default. This displays as “No”. When Filter Cycle 2 is ON it displays as “Yes”.
Press “Yes” or “No” to toggle Filter Cycle 2 ON or OFF. When Filter Cycle 2 is ON, it can be adjusted in the same manner as
Filter Cycle 1.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall filtration by the overlap amount.
Circulation Pump Modes
Some spas may be manufactured with Circ Pump settings that allow programming filtration cycle duration. Some circ Modes
are pre-programmed to operate 24 hours a day and are not programmable. Refer to the spa manufacturer’s documentation
for any Circ Mode details.
Purge Cycles
In order to maintain sanitary conditions, as well as protect against freezing, secondary water devices will purge water from
their respective plumbing by running briefly at the beginning of each filter cycle.
If the Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate a purge when Filter Cycle 2 is programmed to begin.
The Meaning of Filter Cycles
1. The heating pump always runs during the filter cycle*
2. In Rest Mode, heating only occurs during the filter cycle
3. Purges happen at the start of each filter cycle
*For example, if your spa is set up for 24/hour circulation except for shutting
off when the water temperature is 3˚F/1.3˚C above the set temperature, that
shutoff does not occur during filter cycles.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Additional Settings
Light Cycle Option
If Light Cycle does not appear in the Settings Menu, the Light Timer feature is not enabled by the manufacturer.
When available, the Light Timer is OFF by default.
The settings can be edited the same way that Filter Cycles are edited (see page 13).
Light Cycle
Back
Enabled No
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Invert Panel
Selecting Invert Panel will flip the display and the buttons so the panel can be easily operated from inside or outside the
hot tub.
Auxiliary Panel(s)
Specific Buttons for Specific Devices
If the spa has an Auxiliary Panel(s) installed, pressing buttons on that panel will activate the device indicated for
that button.
These dedicated buttons will operate just like the Spa Screen buttons (see page 5) and the equipment will behave
in the same manner with each button press.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Restricting Operation
The control can be restricted to prevent unwanted use or temperature
adjustments.
Lock
Back
Settings
Panel
Off
Off
Locking the Panel prevents the controller from being used, but all
automatic functions are still active.
Locking the Settings allows Jets and other features to be used,
but the Set Temperature and other programmed settings cannot be
adjusted.
Settings Lock allows access to a reduced selection of menu items.
These include Filter Cycles, Invert, Information and Fault Log.
They can be seen, but not changed or edited.
Settings Locked
Panel Locked
102°F
High Range
Set: 104°F
8:32 PM
Ozone
Filter 1
Spa
Scenes
Settings
Ready in Rest Mode
Heating
102°F
Set: 104°F
8:32 PM
Ozone
Filter 1
High Range
Unlock
Ready in Rest Mode
Heating
Unlocking
Lock
Back
Settings
Panel
Off
On
To unlock either Settings or Panel first select Settings
(if it says “On”) or Panel (if it says “On”), than press
in the middle of the screen for at least 5 seconds.
Press here for
5 seconds to
unlock
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Scenes
What are Scenes?
Scenes are stored combinations of equipment states. For example if you want to have Pump 1 at high speed and Pump 2 at
low speed and the Light ON, you could store that in a Scene and recall this combination at any time.
Storing a Scene
Press a Scene number and hold until “Scene stored“ appears at the bottom of the screen to save the current equipment
combination.
Scenes
Scene 1
Back
Scene 2
Scene 3
Scene 4
Scene stored
This appears once the
Scene has been stored
Recalling a Scene
To recall a Scene simply press a Scene number.
Pressing any Scene line which has not yet been stored will simply turn off all spa devices.
Scenes
Scene 1
Back
Scene 2
Scene 3
Scene 4
Scene stored
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Additional Settings
Hold Mode - M037*
Hold Mode is used to disable the pumps during service functions like cleaning or replacing the filter. Hold Mode will last
for 1 hour unless the mode is exited manually. If spa service will require more than an hour, it may be best to simply shut
down power to the spa.
Drain Mode
Some spas have a special feature that allows Pump 1 to be employed when draining the water.
When available, this feature is a component of Hold Mode.
Utilities
The Utilities Menu contains the following:
A/B Temps
When this is set to On, the main screen will display sensor A and sensor B temperatures simultaneously. Sensor A is at
the opposite end of the heater from sensor B.
Demo Mode
Demo Mode is not always enabled, so it may not appear. This is designed to operate several devices in a sequence in
order to demonstrate the various features of a particular hot tub.
Fault Log
The Fault Log is a record of the last 24 faults that can be
reviewed by a service tech.
Use the Up and Down buttons to view each of the Faults.
When Priming Mode shows in the Fault Log, it is not a fault.
Rather, it is used to keep track of spa restarts.
GFCI Test
(Feature not available on CE rated systems.)
Fault Log
Entry 2
Message Code M026
1 Days Ago 2:21PM
Rest Mode
High Range
Set Temp 104°F
Sensors: A: 100 B: 96
Message:
Sensors are out of sync
Back
Your systems may have GFCI configured in one of three ways:
1. GFCI test is not enabled
2. Manual GFCI test is enabled but automatic GFCI test is not enabled
3. Both manual and automatic GFCI tests are enabled. The automatic test will happen within 7 days of the spa being installed and if successful will not repeat. (If the automatic test fails it will repeat after the spa is restarted.)
GFCI Test will not appear on the screen if it is not enabled. This screen allows the GFCI to be tested manually from the
panel and can be used to reset the automatic test feature. (See Page 20)
*M0XX is a Message Code. Codes like this will be seen in the Fault Log
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Additional Settings
Preferences
The Preferences Menu allows the user to change certain parameters based
on personal preference.
Preferences
Back
Temp Display
Change the temperature between Fahrenheit and Celsius.
Time Display
Temp Display
Time Display
Reminders
Cleanup
Dolphin
Color
Language
°F
12 HR
On
0.5 HR `
5 `
Blue
English `
Change the clock between 12 hr and 24 hr display.
Reminders
Turn the reminder messages (like “Clean Filter”) On or Off.
Cleanup
Cleanup Cycle Duration is not always enabled, so it may not appear. When it is available, set the length of time Pump
1 will run after each use. 0-4 hours are available.
Dolphin II and Dolphin III (Applies to RF Dolphin only)
When set to 0, no addressing is used. Use this setting for a Dolphin II or Dolphin III which is factory set for no
address by default. When set between 1 and 7, the number is the address. (See the Dolphin manual for details.)
Color
Selecting Color will cycle through 5 background colors available in the control.
Language
Change the language displayed on the panel.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Information
System Information
The System Information Menu displays various settings and
identification of the particular system. As each item in the
menu is selected, the detail for that item is displayed at the
bottom of the screen.
Software ID (SSID)
Displays the software ID number for the System.
System Information
Back
Software ID (SSID)
System Model
Current Setup
Configuration Signature
Heater Voltage
Heater Type
Software ID (SSID):
M100_101 V0.6
System Model
Displays the Model Number of the System.
Current Setup
Displays the currently selected Configuration Setup Number.
Configuration Signature
Displays the checksum for the system configuration file.
Heater Voltage (Feature not used on CE rated systems.)
Displays the operating voltage configured for the heater.
Heater Wattage as Configured in Software (CE Systems Only.)
Displays a heater kilowatt rating as programmed into the control system software (1-3 or 3-6).
Heater Type
Displays a heater type ID number.
Dip Switch Settings
Displays a number that represents the DIP switch positions of S1 on the main circuit board.
Panel Version
Displays a number of the software in the topside control panel.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Utilities – GFCI Test Feature
The Ground Fault Circuit Interrupter (GFCI) or Residual Current
Detector (RCD) is an important safety device and is required
equipment on a hot tub installation.
(The GFCI Test Feature is not available on CE rated systems.)
GFCI Status - Passed
Back
Test
Reset
Used for verifying a proper installation
Your spa may be equipped with a GFCI Protection feature. If your
spa has this feature enabled by the manufacturer, the GFCI Trip
Test must occur to allow proper spa function.
On some systems:
Within 1 to 7 days after startup, the spa will trip the GFCI to
test it. (The number of days is factory programmed.) The GFCI
must be reset once it has tripped. After passing the GFCI Trip
Test, any subsequent GFCI trips will indicate a ground fault or other unsafe condition and the power to the spa
must be shut off until a service person can correct the problem.
Forcing the GFCI Trip Test (North America Only)
The installer can cause the GFCI Trip Test to occur sooner by initiating it using the above menu.
The GFCI should trip within several seconds and the spa should shut down. If it does not, shut down the power and
manually verify that a GFCI breaker is installed and that the circuit and spa are wired correctly. Verify the function of
the GFCI with its own test button. Restore power to the spa and repeat the GFCI Trip Test.
Once the GFCI is tripped by the test, reset the GFCI and the spa will operate normally from that point. You can verify a
successful test by navigating to the above menu. “Passed” should appear after the Reset line is selected on the GFCI screen.
Warning:
On those systems that automatically test the GFCI within 1 to 7 days after startup:
The end-user must be trained to expect this one-time test to occur.
The end-user must be trained how to properly reset the GFCI.
If freezing conditions exist, the GFCI or RCD should be reset immediately or spa damage could result.
CE Product:
CE registered systems do not have an RCD Test Feature due to the nature of the electrical service.
Some UL registered systems do not have the GFCI Test Feature activated.
The end-user must be trained how to properly test and reset the RCD.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
General Messages
Most messages and alerts will appear at the bottom of the normally used screens.
Several alerts and messages may be displayed in a sequence.
– – –°F – – –°C
Water Temperature is Unknown
After the pump has been running for 1 minute, the temperature will be displayed.
Possible freezing condition
A potential freeze condition has been detected, or the Aux Freeze Switch has closed. All water devices are activated.
In some cases, pumps may turn on and off and the heater may operate during Freeze Protection.
This is an operational message, not an error indication.
The water is too hot – M029*
The system has detected a spa water temp of 110°F (43.3°C) or more, and spa functions are disabled. System will auto
reset when the spa water temp is below 108°F (42.2°C). Check for extended pump operation or
high ambient temp.
*M0XX is a Message Code. Codes like this will be seen in the Fault Log
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Heater-Related Messages
The water flow is low – M016**
There may not be enough water flow through the heater to carry the heat away from the heating element. Heater start up
will begin again after about 1 min. See “Flow Related Checks” below.
The water flow has failed* – M017**
There is not enough water flow through the heater to carry the heat away from the heating element and the heater has been
disabled. See “Flow Related Checks” below. After the problem has been resolved, reset the message*.
The heater may be dry* – M028**
Possible dry heater, or not enough water in the heater to start it. The spa is shut down for 15 min. Reset this message* to
reset the heater start-up. See “Flow Related Checks” below.
The heater is dry* – M027**
There is not enough water in the heater to start it. The spa is shut down. After the problem has been resolved, you must
reset the message* to restart heater start up. See “Flow Related Checks” below.
The heater is too hot* – M030**
One of the water temp sensors has detected 118°f (47.8°C) in the heater and the spa is shut down. You must reset the
message* when water is below 108°f (42.2°C). See “Flow Related Checks” below.
Flow-Related Checks
Check for low water level, suction flow restrictions, closed valves, trapped air, too many closed jets and pump prime.
On some systems, even when spa is shut down by an error condition, some equipment may occasionally turn on to
continue monitoring temperature or if freeze protection is needed.
* Some messages can be reset from the panel. Messages that can
be reset will appear with a “right arrow” at the end of the message.
Press the message text to reset the message.
Clean the filter
`
**M0XX is a Message Code. Codes like this will be seen in the Fault Log
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Sensor-Related Messages
Sensors are out of sync – M015**
The temperature sensors MAY be out of sync by 3°F. Call for Service.
Sensors are out of sync -- Call for service* – M026**
The temperature sensors ARE out of sync. The fault above has been established for at least 1 hour.
Call for Service.
Sensor A Fault, Senor B Fault – Sensor A: M031**, Sensor B: M032**
A temperature sensor or sensor circuit has failed. Call for Service.
Miscellaneous Messages
Communications error
The control panel is not receiving communication from the System. Call for Service.
Test software installed
The Control System is operating with test software. Call for Service.
°F or °C is replaced by °T
The Control System is in Test Mode. Call for Service.
* Some messages can be reset from the panel. Messages that can
be reset will appear with a “right arrow” at the end of the message.
Press the message text to reset the message.
Clean the filter
`
**M0XX is a Message Code. Codes like this will be seen in the Fault Log
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
System-Related Messages
Program memory failure* – M022**
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the firmware (operation
program) and requires a service call.
The settings have been reset (Persistent Memory Error)* – M021**
Contact your dealer or service organization if this message appears on more than one power-up.
The clock has failed* – M020**
Contact your dealer or service organization.
Configuration error (Spa will not Start Up)
Contact your dealer or service organization.
The GFCI test failed (System Could Not Test the GFCI) – M036**
(North America Only) May indicate an unsafe installation. Contact your dealer or service organization.
A pump may be stuck on – M034**
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
Hot fault – M035**
A Pump Appears to have been Stuck ON when spa was last powered
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
* Some messages can be reset from the panel. Messages that can
be reset will appear with a “right arrow” at the end of the message.
Press the message text to reset the message.
Clean the filter
`
**M0XX is a Message Code. Codes like this will be seen in the Fault Log
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Reminder Messages
General maintenance helps.
Reminder Messages can be suppressed by using the Preferences Menu. See Page 18.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled entirely, or there may be a limited
number of reminders on a specific model. The frequency of each reminder (i.e. 7 days) can be specified by the Manufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days.
Check pH with a test kit and adjust pH with the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days.
Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate chemicals.
Clean the filter
May appear on a regular schedule, i.e. every 30 days.
Clean the filter media as instructed by the manufacturer. See HOLD on page 17.
Additional messages may appear on specific systems.
Reminder messages can be reset from the panel. Messages that
can be reset will appear with a “right arrow” at the end of the
message. Press the message text to reset the message.
Clean the filter
`
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
BP1500 Tech
Reminder
Messages
Sheet
Power Requirements (D):
Test the GFCI (or RCD)
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
May
appear
on a regular
schedule,
i.e. every
30 days.
4 wires
(Hot–Line
1, Hot–Line
2, Neutral,
Ground)
The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its reliability.
Every user should be trained to safely test the GFCI or RCD associated with the hot tub installation.
A GFCI or RCD will have a TEST and RESET button on it that allows a user to verify proper function.
Change the water
May appear on a regular schedule, i.e. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days.
Vinyl covers should be cleaned and conditioned for maximum life.
Treat the wood
May appear on a regular schedule, i.e. every 180 days.
Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for maximum life.
Change the filter
May appear on a regular schedule, i.e. every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
Additional messages may appear on specific systems.
Reminder messages can be reset from the panel. Messages that
can be reset will appear with a “right arrow” at the end of the
message. Press the message text to reset the message.
Clean the filter
`
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Warning! Qualified Technician Required for Service and Installation
Basic Installation and
Configuration Guidelines
CSA Compliance/Conformité
Caution:
Use minimum 6AWG copper conductors only.
s4ESTTHEGROUNDFAULTCIRCUITINTERRUPTERBEFOREEACHUSEOFTHESPA
Torque field connections between 21 and 23 in lbs.
s2EADTHEINSTRUCTIONMANUAL
Readily accessible disconnecting means to be provided at time of installation.
s!DEQUATEDRAINAGEMUSTBEPROVIDEDIFTHEEQUIPMENTISTOBEINSTALLED
in a pit.
Permanently connected power supply.
s&ORUSEONLYWITHINANENCLOSURERATED#3!%NCLOSURE
Connect only to a circuit protected by a Class A Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD) mounted at least 5’ (1.52M)
from the inside walls of the spa/hot tub and in line of sight from the
equipment compartment.
CSA enclosure: Type 2
Refer to Wiring Diagram inside the cover of the control enclosure.
Refer to Installation and Safety Instructions provided by the spa manufacturer.
s#ONNECTONLYTOACIRCUITPROTECTEDBYA#LASS!GROUNDFAULTCIRCUIT
interrupter or residual current device.
s4OENSURECONTINUEDPROTECTIONAGAINSTSHOCKHAZARDUSEONLYIDENTICAL
replacement parts when servicing.
s)NSTALLASUITABLYRATEDSUCTIONGUARDTOMATCHTHEMAXIMUMmOWRATE
marked.
Warning:
s7ATERTEMPERATUREINEXCESSOFª#MAYBEINJURIOUSTOYOURHEALTH
s$ISCONNECTTHEELECTRICALPOWERBEFORESERVICING
Warning: People with infectious diseases should not use a spa or hot
Attention:
tub.
s4OUJOURSVERIlERLEFlCACITEDUDISJONCTEURDIFFERENTIELAVANTDUTILISER
differentiel avant d’utiliser le bain.
Warning: To avoid injury, exercise care when entering or exiting the spa
or hot tub.
Warning: Do not use a spa or hot tub immediately following strenuous
exercise.
Warning: Prolonged immersion in a spa or hot tub may be injurious to
your health.
Warning: Maintain water chemistry in accordance with the Manufacturers instructions.
Warning: The equipment and controls shall be located not less than 1.5
meters horizontally from the spa or hot tub.
Warning! GFCI or RCD Protection.
The Owner should test and reset the GFCI or RCD on a
regular basis to verify its function.
Warning! Shock Hazard!
No User Serviceable Parts.
Do not attempt service of this control system. Contact your
dealer or service organization for assistance. Follow all
owner’s manual power connection instructions. Installation
must be performed by a licensed electrician and all grounding connections must be properly installed.
s,IRELANOTICETECHNIQUE
s,ORSQUELAPPAREILLAGEESTINSTALLEDANSUNEFOSSEONDOITASSURERUN
drainage adequat.
s%MPLOYERUNIQUEMENTALINTERIEURDUNECLOTURE#3!%NCLOSURE
s#ONNECTERUNIQUEMENTAUNCIRCUITPROTEGEPARUNDISJONCTEURDIFFERENtiel de Class A.
s!lNDASSURERUNEPROTECTIONPERMANENTECONTRELEDANGERDESHOCK
electrique, lors de l’entretien employer seulement des pieces de rechange
identiques.
s,ESPRISESDASPIRATIONDOIVENTETREEQUIPEESDEGRILLESCONVENANTAU
debit maximal indique.
Avertissement:
s$ESTEMPERATURESDELEAUSUPERIEURESAª#PEUVENTPRESENTERUN
danger pour la sante.
s$ECONNECTERDUCIRCUITDALIMENTATIONELECTRIQUEAVANTELENTRETIEN
Warning/Advertissement:
s$ISCONNECTTHEELECTRICPOWERBEFORESERVICING+EEPACCESSDOORCLOSED
s$ECONNECTERDUCIRCUITDALIMENTATIONELECTRIQUEAVANTLENTRETIEN
Garder la porte fermer.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42256_A
01-09-14
Piping instructions of ELBRUS spa
30mA safety relay is need to be installed!


E: Electric hole (500mm) to terminal facilities through spa cabinet. 3 m cabels are required!
D: Drain connector (500 mm)
In case of sinking just allowed to sinking part which is under the spa`s acrylic-flange. You have to make safe the
diversion of inlet water in the deepest point of the inspection pit. The inspection pit has to be aired accordingly
(proposal: building in an extractor fan).
The inspection pit`s minimum width is 60 cm around the spa.
If the spa is placed indoor please make allowances for the following special requirements: The water
accumulates around the spa so the socket cover has to be in possession of a suitable drainage. This arrangement
hinders the water in collecting.
Given sizes above are only information, there may be variant sizes on the grounds of the spa`s manufacturing
technique.
1 Phase (Line) Connection to 1x32A
Advice to ELBRUS Start modell
1 Phase (Line) Connection to 1x32A (minimum)
Advice to ELBRUS Deluxe and Premium modell
3 Phase (Line) Connection to 3x16A (optimum)
Advice to ELBRUS Deluxe and Premium modell
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement