null  null
Model HLNAV-262
55 to 65 GHz Low Noise Amplifier
APPLICATIONS
•
Point-to-Point Radios
•
Radar Transmitters
•
WiGig Development &
Test Equipment
The HLNAV-262 Low Noise Amplifier covers the frequency range from 55 to 65 GHz. MMIC
technology is employed for high reliability and repeatability. The amplifier package provides
WR-15 waveguide interfaces in an in-line configuration using the standard UG-385/U flange.
The amplifier can be used in receivers for communication and radar systems and also for
amplification in test equipment. The LNA contains a voltage regulator and bias sequencing
circuitry allowing the use of a single bias to power the amplifier.
TECHNICAL SPECIFICATIONS
Parameter
Frequency Range
Noise Figure
Small Signal Gain
P1dB
Input Return Loss
Output Return Loss
Maximum Input Power
DC Bias
RF Interfaces
Size
Surface Finish
Specification
55.0 to 65.0 GHz
4.8 dB typical
15 dB minimum, 17 dB typical
+10 dBm minimum
7 dB typical
9 dB typical
0 dBm without damage
+6 VDC @ 175 mA typical
WR-15 waveguide, UG-385/U flanges
1.31”L X 1.34”W x 0.97”H
Gold Plate
12 Lancaster County Road, Harvard, Massachusetts 01451 Tel: (978) 772-7774 FAX: (978) 772-7775
Visit us on the web at www.hxi.com
Rev A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement