thermometers - Industrial Calibration

thermometers - Industrial Calibration
thermometers
for catering
2009
Issue 1
distributed by:
measurement that works
CATERING THERMOMETERS
catering
thermometers
Selecting the correct thermometer for a food and catering
application is, by definition, very important to achieve the
maximum accuracy and repeatability of the temperature.
The selection criteria for a digital thermometer should include:
l measurement range
l resolution of the reading 1°C, 0.1°C or 0.01°C
l desired accuracy
l response time
ETI offers a range of catering thermometers and accessories
that are ideal for busy restaurants, cafes, bars etc. where food
safety is essential.
fridge & freezer temperatures
Keeping fridges and freezers at the correct temperature is
critical to ensure good food safety during storage.
Food should be stored in a fridge at a minimum of +4°C but
this is only safe for short periods. It is better to store food in a
fridge at +2°C.
Food stored in a freezer should be regularly rotated and stored
at between -18 and -22°C as bacteria will not grow at these
temperatures.
safe food temperatures
To prevent food poisoning, it is essential to kill bacteria. Most
bacteria are killed quickly at between +75 to +100°C. The
danger zone is between +5 to +70°C where bacteria will grow
rapidly. Therefore it is important when microwaving food that
there are no cold spots in the food, likewise when reheating
food or sauces that the food is reheated above +75°C.
+100°C
bacteria will be destroyed
+83°C
internal temperatures of reheated food
+80/75°Cpoultry/meat internal temperatures
D
A
N
G
E
R
Z
O
N
E
+70°C
bacteria is gradually killed
+37°C
ideal temperature for bacteria to grow
+4°C
+2°C
safe storage for a short period
safer for storage
-18°C
bacteria will not grow - but may not die
All the above temperatures are a guideline only.
2
page nos.
2000 series thermometers___________________ 14
2001 kit_ ________________________________ 17
2003 kit_ ________________________________ 17
accessories____________________________ 37-39
alarm thermometers_____________________30, 32
batteries__________________________________ 38
boots - protective colour-coded ______________ 37
CaterTemp thermometers_____________________ 8
CaterTemp Plus waterproof thermometers_______ 9
CaterWipes_______________________________ 39
Combo 2-in-1 infrared/probe thermometer_____ 25
cooking thermometers______________________ 36
cook's thermometer________________________ 36
data-loggers___________________________ 18-21
dial thermometers__________________________ 36
EcoTemp thermometer______________________ 26
Food Check thermometers___________________ 5
FoodSafe fridge thermometer________________ 33
fridge or freezer thermometers_ ___________ 31-33
frying thermometer_________________________ 36
Gourmet (FPT) folding probe thermometer_ ____ 27
infrared thermometers___________________ 22-25
IR-Chill infrared thermometer_ _______________ 22
kits - catering thermometers_ _________ 11, 16, 17
log books for temperature records____________ 37
max/min thermometers_ ______ 26, 27, 29, 30, 32
meat thermometer_________________________ 36
microwave thermometer_ ___________________ 34
milk thermometers_________________________ 36
MiniTherma K thermocouple thermometer______ 16
Multi-function thermometer__________________ 27
oven thermometers_________________________ 34
pocket-sized thermometers_ ______________ 26-29
probe clip holders_ ________________________ 37
probes - plug-mounted - type K_ _____________ 16
probes - thermocouple - type K_______________ 15
probes - NTC thermistor for Therma 20________ 13
Probe-Wipes - anti-bacterial_________________ 39
RayTemp 3 infrared thermometer_ ____________ 24
sugar & jam thermometers_ _________________ 36
Therma 20 thermistor thermometer_ __________ 12
Therma 20 kit_____________________________ 17
ThermaData loggers_ ___________________ 18-21
ThermaGuard telephone warning system_______ 30
ThermaLite thermometer_ ___________________ 26
Thermamite thermometers___________________ 10
Thermamite 601 kit________________________ 11
Thermapen thermometers__________________ 6-7
timers____________________________________ 35
TN1 infrared thermometer___________________ 23
TN2 infrared thermometer___________________ 23
waterproof thermometers______________ 9, 29, 33
CONTENTS
description
3
CATERING THERMOMETERS
ThermaCheck
thermistor thermometer
3 high system accuracy ±0.4°C
3 case includes Biomaster anti-bacterial additive
3 temperature range -39.9 to +109.9°C
3 supplied complete with a penetration probe
The ThermaCheck hand held thermistor thermometer has been
specifically designed for use in the food processing and catering
industries to cope with routine day-to-day usage.
The ThermaCheck measures temperature over the range of
-39.9 to +109.9°C with a resolution of 0.1°C and a high system
accuracy of ±0.4°C (-10 to +70°C).
The ABS case includes "Biomaster" additive that reduces bacterial
growth. The instrument features a large, easy to read, LCD display
with open circuit and low battery indication. The ThermaCheck
is powered by a 9 volt PP3 battery which gives the thermometer
approximately 100 hours continuous use. The unit incorporates
an auto-power off facility which maximises battery life, turning
the instrument off automatically after five minutes.
The ThermaCheck thermometer is supplied complete with a permanently attached, general purpose, food penetration
probe with a 130mm stainless steel stem and a one metre coiled PU lead.
optional accessories
The protective PVC boot helps to protect the instrument against
accidental damage. The black acrylic wall bracket stores the instrument
safely (screws not supplied).
specification
ThermaCheck
range
-39.9 to +109.9°C
resolution
0.1°C
accuracy
±0.4°C (-10 to +70°C)
battery
9 volt PP3
battery life
100 hours
sensor type
thermistor
display
12.7mm LCD
dimensions
36 x 80 x 147mm
weight
240 grams
a traceable certificate of calibration is included with each instrument
order code
226-022
830-200
832-110
4
description
ThermaCheck thermometer
protective PVC boot
wall bracket
What is Biomaster? - Biomaster additives
are powerful broad-spectrum inorganic,
silver-based biocides for use in plastics,
helping to reduce hygiene risks. The
concentration of silver, in the patented
anti-microbial active agent in Biomaster,
provides a release of silver ions on demand,
which in turn safely inhibits microbial growth.
°C
AUTO
OFF
CATERING THERMOMETERS
Food Check 2 & 5
thermometers
3 two models available 0.1°C or 1°C resolution
3 case includes Biomaster anti-bacterial additive
3 designed for the professional caterer
3 supplied complete with penetration probe
The Food Check digital thermometers are designed specifically
for use in the food and catering industry. The Food Check
thermometers are ideal for measuring the temperature quickly
and accurately, when monitoring cooked and chilled foods as
part of HACCP and health and safety procedures.
The ABS case includes "Biomaster" additive that reduces bacterial
growth. The instrument features a large, easy to read, LCD display
with open circuit and low battery indication. The thermometer
incorporates a simple to use on/off switch and is powered by a
9 volt PP3 battery that gives 200 hours continuous use.
The Food Check 2 measures temperature over the range of
-49.9 to +149.9°C with a resolution of 0.1°C and the Food
Check 5 measures temperature over the range of -30 to +300°C
with a resolution of 1°C.
Each Food Check thermometer is supplied with a permanently attached food penetration probe with 130mm pointed
stainless steel stem and 500mm PVC connecting lead.
optional accessories
The protective PVC boot helps to protect the instrument against accidental
damage. The black acrylic wall bracket stores the instrument safely
(screws not supplied).
specification
Food Check 2
Food Check 5
range
-49.9 to +149.9°C
-30 to +300°C
resolution
0.1°C
1°C
accuracy
±0.5°C ±1%
±1°C ±1 digit
battery
9 volt PP3
battery life
200 hours
sensor type
K thermocouple
display
12.7mm LCD
dimensions
36 x 80 x 147mm
weight
240 grams
a traceable certificate of calibration is included with each instrument
What is Biomaster? - Biomaster additives
are powerful broad-spectrum inorganic,
silver-based biocides for use in plastics,
helping to reduce hygiene risks. The
concentration of silver, in the patented
anti-microbial active agent in Biomaster,
provides a release of silver ions on demand,
which in turn safely inhibits microbial growth.
order code description
221-009
221-008
830-200
832-110
Food Check 2 thermometer
Food Check 5 thermometer
protective PVC boot
wall bracket
°C
5
CATERING THERMOMETERS
Thermapen™ 1 & 5
thermometers
3 one-handed operation
3 lightweight, compact & easy to use
3 foldaway stainless steel probe
3 auto-power on/off facility
The Thermapen thermometers are
designed for reliability and ease of
use. The thermometers incorporate
a clear digital display with a precise
read-out of temperature over the range
of -49.9 to +199.9°C or -50 to +300°C
and a 0.1°C or 1°C resolution. Both low battery and
open circuit indication are also displayed, when applicable.
The Thermapen is lightweight, at less than 100 grams including
battery and probe. The casing is manufactured from high
impact ABS plastic designed to cope with routine day-to-day
applications. The Thermapen thermometers incorporate a
stainless steel penetration probe that conveniently folds back
through 180 degrees into the side of the instrument when not in
use, turning the instrument off. An auto-power on/off facility turns
the instrument on when the probe is in use and automatically off
after five minutes, maximising battery life.
specification
Thermapen 1
Thermapen 5
range
-49.9 to +199.9°C
-50 to +300°C
resolution
0.1°C
1°C
accuracy
±0.4°C ±1 digit
±1% ±1 digit
battery
12 volt MN21
battery life
100 hours
sensor type
K thermocouple
display
12.7mm LCD
dimensions
19 x 47 x 153mm
weight
97 grams
a traceable certificate of calibration is included with each instrument
order code
6
211-101
211-201
211-301
211-401
211-501
211-601
211-105
211-205
211-305
211-405
211-505
211-605
830-110
830-001
832-200
description
Thermapen 1 (0.1°C) - white
Thermapen 1 (0.1°C) - yellow
Thermapen 1 (0.1°C) - green
Thermapen 1 (0.1°C) - red
Thermapen 1 (0.1°C) - blue
Thermapen 1 (0.1°C) - brown
Thermapen 5 (1°C) - white
Thermapen 5 (1°C) - yellow
Thermapen 5 (1°C) - green
Thermapen 5 (1°C) - red
Thermapen 5 (1°C) - blue
Thermapen 5 (1°C) - brown
protective wallet
zip pouch
wall bracket
colour-coded cases
The Thermapen 1 and 5 pocket-sized
thermometers are available in a variety of
colours. The colour-coded Thermapens can
be part of your HACCP and due diligence
procedures, being used for different food
types or preparation areas, reducing the risk
of cross-contamination.
white
bakery/dairy products
 yellow
cooked meats
 green
salad/fruit products
 red
raw meat
 blue
raw fish
 brown
vegetable products
°C
AUTO
OFF
fast response thermometers
3 guaranteed to reach the temperature in just four seconds
3 over 50% faster response than traditional probes
3 two models 0.1°C or 1°C resolution
3 one-handed operation
The Fast Response (FR) Thermapen pocket thermometers are 'probably'
the fastest reading contact thermometers on the market today. The true
temperature of a product can be tested by the FR Thermapen in just four seconds.
The response time of any thermometer is dependant on many factors, the mass of the sensing
tip, heat transfer and, most importantly, the state of the substance being measured. With both
air and liquid, agitation is crucial to rapid response. The ETI calibration laboratory has tested
the FR Thermapen in a stirred water bath with amazing results. Each FR Thermapen reached
100% of the test temperature in four seconds.
CATERING THERMOMETERS
Thermapen™ 1 & 5
The FR Thermapen incorporates a clear digital display with a precise read-out of temperature over the range of -49.9
to +199.9°C or -50 to +300°C with a 0.1°C or 1°C resolution. Both low battery and open circuit indication are
also displayed, when applicable. The Thermapen is powered by a 12 volt MN21 alkaline battery with a minimum
life expectancy of 100 hours and is supplied with a detachable wrist strap, battery and instruction card.
optional Thermapen accessories
The protective wallet and zip pouch (pictured left),
both with belt loops, help to protect instruments
against accidental damage.
The black acrylic wall bracket (pictured right) stores
the instrument safely (screws not supplied).
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
FR Thermapen 1
FR Thermapen 5
-49.9 to +199.9°C
-50 to +300°C
0.1°C
1°C
±0.4°C ±1 digit
±1% ±1 digit
12 volt MN21
100 hours
K thermocouple
12.7mm LCD
19 x 47 x 153mm
97 grams
a traceable certificate of calibration is included with each instrument
order code description
211-571
211-575
830-110
830-001
832-200
FR Thermapen 1
FR Thermapen 5
protective wallet
zip pouch
wall bracket
°C
AUTO
OFF
7
CATERING THERMOMETERS
CaterTemp™ 2 & 5
thermometers
3 two models available 0.1°C or 1°C resolution
3 proven electronic circuitry & durability
3 designed for the professional caterer
3 supplied complete with penetration probe
The CaterTemp 2 and 5 professional digital thermometers are
designed with the catering and food processing industry in mind.
Housed in a robust ABS case, the CaterTemp thermometers are
a combination of proven circuitry and durability.
The CaterTemp 2 measures temperature over the range of -49.9
to +199.9°C with a resolution of 0.1°C and the CaterTemp 5 over
the range of -50 to +300°C with a resolution of 1°C.
Both instruments feature a bright, easy to read LCD, displaying open
circuit and low battery indication, when applicable. The CaterTemp
thermometers are powered by a 9 volt PP3 battery which gives the
thermometers approximately 200 hours continuous use.
Each CaterTemp thermometer is supplied with a permanently
attached food penetration probe with 130mm pointed stainless
steel stem and one metre coiled PU lead.
optional accessories
The protective PVC boot helps to protect instruments against accidental
damage. The black acrylic wall bracket stores the instrument safely
(screws not supplied).
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
CaterTemp 2
-49.9 to +199.9°C
0.1°C
±0.5°C ±1%
CaterTemp 5
-50 to +300°C
1°C
±1°C ±1 digit
9 volt PP3
200 hours
K thermocouple
12.7mm LCD
36 x 80 x 147mm
240 grams
a traceable certificate of calibration is included with each instrument
order code description
8
221-006
221-007
830-200
832-110
CaterTemp 2 thermometer
CaterTemp 5 thermometer
protective PVC boot
wall bracket
°C
CATERING THERMOMETERS
CaterTemp™ Plus
waterproof thermometers
3 waterproof case offering IP66/67 protection
3 extruded aluminium case for superior durability
3 rubber bumper seals for impact resistance
3 supplied complete with food penetration probe
The CaterTemp Plus hand held thermometer is housed in a robust
extruded aluminium waterproof case offering IP66/67 protection.
The instrument incorporates the latest microprocessor technology with
improved durability, designed for reliability and ease of use in day-today catering and food processing applications.
The CaterTemp Plus thermometer measures temperature over the range
of -49.9 to +299.9°C with a 0.1°C resolution. The instrument features
a large, easy to read, LCD display with open circuit and low battery
indication. The unit is powered by a 9 volt PP3 battery which gives the
thermometer approximately 5,000 hours continuous use.
The on/off button is conveniently located at the front of the instrument as
is the display hold facility. The CaterTemp Plus thermometer incorporates
a secure battery compartment with a waterproof cover.
Each CaterTemp Plus thermometer is supplied with a permanently
attached, water resistant, hand held, food penetration probe with a Ø3.3
x 130mm stainless steel stem and one metre PU coiled lead. The probe
is both strong and versatile and suitable for a variety of applications
including liquids, semi-solids and granular materials.
colour-coded rubber bumper seals
The CaterTemp Plus thermometers are available with colour-coded
rubber bumper seals, black, yellow, green, red or blue. The colourcoded seals help avoid cross-contamination.
optional accessories
The protective PVC boot helps
to protect the instrument
against accidental damage.
The wall bracket stores the
instrument safely (screws not
supplied).
specification
CaterTemp Plus
range
-49.9 to +299.9°C
resolution
0.1°C
accuracy
±0.4°C ±1 digit
battery & battery life
9 volt PP3 alkaline - 5,000 hours
sensor type
K thermocouple
display
12mm LCD
dimensions
35 x 60 x 115mm
weight
244 grams
a traceable certificate of calibration is included with each instrument
order code description
221-056
221-256
221-356
221-456
221-556
830-242
832-150
CaterTemp Plus - black seal
CaterTemp Plus - yellow seal
CaterTemp Plus - green seal
CaterTemp Plus - red seal
CaterTemp Plus - blue seal
protective PVC boot
wall bracket
°C
HOLD
AUTO
OFF
IP66/67
9
CATERING THERMOMETERS
Thermamite™ 1 & 5
thermometers
3 compact & robust design
3 two models 0.1°C or 1°C resolution
3 accuracy, flexibility & ease of use
3 range -49.9 to +199.9°C or -30 to +300°C
The Thermamite thermometers offer accuracy, flexibility and ease of use, coupled with the
durability and reliability that is required by the food and catering industry in helping to meet
today's food hygiene legislation.
Both the Thermamite 1 and 5 incorporate a clear LCD display with a precise read-out of temperature
over the range of -49.9 to +199.9°C or -30 to +300°C and a 0.1°C or 1°C resolution. Low
battery and open circuit indication are also displayed, when applicable.
Both instruments are powered by a 9 volt PP3 battery with a minimum life
expectancy of up to 500 hours. Each thermometer is supplied with a
permanently attached rigid pointed, stainless steel food penetration
probe (Ø3.3 x 108mm) and 500mm connecting lead,
battery and instruction card.
optional accessories
This protective PVC boot incorporates a worktop stand and
probe holder. The boot helps to protect the instrument against
accidental damage. The black acrylic wall bracket stores the
instrument and probe safely (screws not supplied).
specification
Thermamite 1
Thermamite 5
range
-49.9 to +199.9°C
-30 to +300°C
resolution
0.1°C
1°C
accuracy
±0.5°C ±1 digit
±1°C ±1 digit
sensor type
PT100
K thermocouple
battery
9 volt PP3
battery life
500 hours
display
12.7mm LCD
dimensions
25 x 68 x 121mm
weight
140 grams
a traceable certificate of calibration is included with each instrument
order code
10
262-051
262-151
262-251
262-351
262-451
262-651
261-055
261-155
261-255
261-355
261-455
261-655
830-230
832-120
description
Thermamite 1 (0.1°C) - blue
Thermamite 1 (0.1°C) - white
Thermamite 1 (0.1°C) - yellow
Thermamite 1 (0.1°C) - green
Thermamite 1 (0.1°C) - red
Thermamite 1 (0.1°C) - brown
Thermamite 5 (1°C) - blue
Thermamite 5 (1°C) - white
Thermamite 5 (1°C) - yellow
Thermamite 5 (1°C) - green
Thermamite 5 (1°C) - red
Thermamite 5 (1°C) - brown
protective PVC boot
wall bracket
colour-coded cases
The colour-coded Thermamite thermometers
can be used for different food types or
preparation areas, reducing the risk of crosscontamination.
°C
CATERING THERMOMETERS
Thermamite™ 601
thermometer kit
3 no wasted time waiting for temperature to stabilise
3 temperature range -49.9 to +199.9°C
3 option to use several remote probes
3 takes both product & storage temperatures
The Thermamite 601 thermometer measures
temperature over the range of -49.9 to +199.9°C with
a 0.1°C resolution. Both low battery and open circuit
indication are displayed, when applicable. The
Thermamite 601 has the same specification as the
Thermamite 1 thermometer (see opposite) with
the added benefit of a detachable probe.
The Thermamite 601 thermometer is supplied
as a kit and is the ideal solution for taking both
product and storage temperatures. By utilising a
number of remote probes it is possible to simply
and quickly collect temperature measurements from a
large number of remote probes strategically positioned in food storage appliances.
supplied as a complete kit
The Thermamite 601 thermometer kit contains a Thermamite 601 thermometer and two probes, a food penetration
probe (Ø3.3 x 108mm) and a remote probe with self-adhesive attachment pads and compatible socket (additional
remote probes can be purchased). Each probe is supplied with an integral 500mm connecting lead. Each kit is
housed in a protective ABS carrying case and includes a temperature log book, a tub of 70 anti-bacterial probe
wipes and a traceable certificate of calibration.
fridge/freezer remote probe
The remote probe and socket can be attached to each fridge/freezer
or display cabinet using the self-adhesive pads provided, the remote
probe being placed inside the appliance. When the temperature
needs to be checked, simply plug the Thermamite 601 into the
remote socket for an instant display of the temperature. No time is
wasted waiting for the temperature to stabilise, therefore a number
of chill cabinets and fridges can be monitored in minutes.
specification
order code description
860-601
Thermamite 601 thermometer kit
160-987
additional remote probe
the Thermamite kit includes two probes
Thermamite 601 kit
range
-49.9 to +199.9°C
resolution
0.1°C
accuracy
±0.5°C ±1 digit
battery & battery life
9 volt PP3 - 500 hours
sensor type
PT100
display
12.7mm LCD
dimensions
25 x 68 x 121mm
weight
140 grams
a traceable certificate of calibration is included with each kit
°C
11
CATERING THERMOMETERS
Therma 20
thermistor thermometer
3 temperature range -39.9 to +109.9°C
3 wide range of interchangeable probes
3 high system accuracy ±0.4°C
3 case includes Biomaster anti-bacterial additive
The Therma 20 hand held thermistor thermometer has been specifically
designed for use in the food processing and catering industries with HACCP,
due diligence and health and safety procedures in mind.
The instrument displays temperature to 0.1°C over the range of -39.9
to +109.9°C with a high system accuracy of ±0.4°C. The Therma 20
features a large, easy to read, LCD display with open circuit and low
battery indication.
The ABS case includes "Biomaster" additive that reduces bacterial growth.
The instrument incorporates an auto-power off facility that maximises
battery life, turning the instrument off automatically after five minutes. The
instrument is housed in a robust ABS case.
The Therma 20 thermometer incorporates an easy to use Lumberg screw-locking type connector, allowing a wide
range of interchangeable probes to be used. ETI offers an extensive range of interchangeable thermistor probes,
see opposite.
optional accessories
The protective PVC boot helps to protect the instrument against
accidental damage. The black acrylic wall bracket stores the instrument
safely (screws not supplied).
specification
Therma 20
range
-39.9 to +109.9°C
resolution
0.1°C
accuracy
±0.4°C (-10 to +70°C)
battery
9 volt PP3
battery life
100 hours
sensor type
thermistor
display
12.7mm LCD
dimensions
36 x 80 x 147mm
weight
210 grams
a traceable certificate of calibration is included with each instrument
order code description
226-020
Therma 20 thermometer
830-200
protective PVC boot
832-110
wall bracket
the Therma 20 is exclusive of probe
12
What is Biomaster? - Biomaster additives
are powerful broad-spectrum inorganic,
silver-based biocides for use in plastics,
helping to reduce hygiene risks. The
concentration of silver, in the patented
anti-microbial active agent in Biomaster,
provides a release of silver ions on demand,
which in turn safely inhibits microbial growth.
°C
AUTO
OFF
IP65
for use with the Therma 20 thermometer
order code
penetration probe
Ø3.3 x 130mm
penetration probe
This stainless steel penetration probe is versatile
and strong and incorporates a heavy duty, ribbed,
polypropylene handle with a white end cap. Ideal
for many temperature measurement applications
including liquids, semi-solids and granular
materials. Response time less than two seconds.
Maximum probe temperature +110°C.
174-166
The
above penetration probe
is also available with colourcoded
end caps. Maximum
probe
temperature
+110°C.
 blue cap
 brown cap
 green cap

red cap
 yellow cap
174-162
174-163
174-164
174-165
174-167
CATERING THERMOMETERS
NTC thermistor probes
Ø3.3 x 130mm
fast response probe
Ø2.6 x 130mm
air or gas wire probe
Ø3.7 x 30mm with 1000mm FEP lead
air or gas probe
Ø4.5 x 130mm
foil between pack probe
40 x 50mm with 1000mm FEP lead
corkscrew probe
Ø8 x 100mm
This stainless steel, fast response, needle
penetration probe incorporates a heavy duty ribbed,
polypropylene handle. The probe is suitable for
liquids and soft semi-solid materials including fish,
fruit and other soft or delicate materials. Response
time less than one second. Maximum probe
temperature +110°C.
174-100
This fast response, flexible, air or gas wire probe
is ideal for measuring air temperatures in fridges,
freezers, chill cabinets and similar. The air or
gas probe is supplied with a one metre FEP lead.
Response time less than one second. Maximum
probe temperature +110°C.
170-372
This stainless steel, fast response, hand held air
or gas probe incorporates a heavy duty ribbed,
polypropylene handle. The probe is ideal for
measuring air temperatures in refrigeration units,
storage areas and other similar applications.
Response time less than two seconds. Maximum
probe temperature +110°C.
174-300
This easy to use, flexible, fast response, foil between
pack probe has been specifically designed to
measure temperature between packs or boxes of
produce in a variety of applications. Response
time less than three seconds. Maximum probe
temperature +110°C.
170-090
This frozen food probe incorporates a heavy duty
T-shaped, polypropylene handle and a corkscrew
design sensing tip. Ideal for measuring deep
frozen foods or other frozen materials. The probe
is supplied with a one metre PVC detachable lead.
Response time less than six seconds. Maximum
probe temperature +110°C.
170-175
13
CATERING THERMOMETERS
2000 series
thermometers
3 three models 0.1/1°C, 0.1°C or 1°C resolution
3 range -49.9 to +1000°C
3 versatile thermometers
3 front-mounted thermocouple probe socket
The 2000 series of hand held digital thermometers
measures temperature over the range of -49.9 to +1000°C
with a 0.1°C or 1°C resolution.
The 2001 measures temperature over the range of -50
to +1000°C with a resolution of either 0.1°C
or 1°C. The 2002 measures temperature
with a resolution of 0.1°C over the entire
measurement range of -49.9 to +199.9°C
and the 2003 measures temperature with a resolution of 1°C over the entire range of -50 to +1000°C.
The thermometers feature an easy to read, LCD display with °C, hold, open circuit and low battery indication. Each
unit incorporates an auto-power off facility that automatically turns the instrument off after approximately three
minutes, maximising battery life. Conveniently located is the front mounted thermocouple probe socket that allows
a wide range of interchangeable thermocouple type K probes to be connected to the instrument. For full details of
the thermocouple type K probes available, see opposite.
optional accessories
The protective PVC boot helps to protect the instrument against
accidental damage. The clear polycarbonate wall bracket stores the
instrument safely (screws not supplied).
specification
2001
2002
2003
range 0.1°C
-49.9 to +199.9°C
-49.9 to +199.9°C
n/a
range 1°C
-50 to +1000°C
n/a
-50 to +1000°C
resolution
0.1°C & 1°C
0.1°C
1°C
accuracy 0.1°C
±0.5°C ±1%
±0.5°C ±1%
n/a
accuracy 1°C
±1°C ±0.5%
n/a
±1°C ±0.5%
battery life
150 hours
175 hours
175 hours
battery
9 volt PP3
sensor type
K thermocouple
display
12.7mm LCD
dimensions
35 x 73 x 141mm
weight
220 grams
210 grams
210 grams
a traceable certificate of calibration is included with each instrument
order code description
14
221-201
2001 thermometer
221-022
2002 thermometer
221-033
2003 thermometer
830-205
protective PVC boot
832-115
wall bracket
the 2000 series is exclusive of probe
°C
HOLD
AUTO
OFF
thermocouple type K
T/C order code
penetration probe
This stainless steel penetration probe is strong
and versatile. Ideal for measuring a wide variety
of applications including liquids and semisolids. Response time less than three seconds.
Maximum probe temperature +250°C.
K
123-160
This extended, stainless steel, penetration probe
is versatile. Ideal for measuring a wide variety
of applications including liquids and semisolids. Response time less than three seconds.
Maximum probe temperature +250°C.
K
123-168
K
123-159
Ø3.3 x 100mm
This reduced tip, fast response, stainless steel,
penetration probe is ideal for liquids or semisolids i.e. delicate foods, soft rubber and other
similar materials. Response time less than two
seconds. Maximum probe temperature +250°C.
K
133-170
Ø3.3 x 130mm
This oven probe has a stainless steel handle and a
two metre PTFE high temperature lead. An oven
probe without a handle is available, order code
133-173. Response time less than four seconds.
Maximum probe temperature +250°C.
K
123-300
Ø4.5 x 130mm
This stainless steel, fast response air/gas probe
is ideal for measuring air temperature in chill
cabinets, fridges, freezers, offices, storage areas
and similar. Response time less than 0.5 of a
second. Maximum probe temperature +250°C.
This precision straight ribbon surface probe
utilises flat ribbon technology that ensures
a fast, accurate response with minimal heat
loss. Response time less than 0.5 of a second.
Maximum probe temperature +250°C.
K
123-030
K
123-060
Ø4.5 x 130mm
This rigid, stainless steel, between pack probe
is strong and versatile, designed specifically to
measure between packets or boxes of produce.
Response time less than three seconds.
Maximum probe temperature +250°C.
K
133-362
Ø1.5 x 1000mm
This PTFE insulated exposed junction wire probe
is suitable for measuring the air temperature in
fridges, freezers, concrete etc. Response time
less than 0.5 of a second. Maximum probe
temperature +250°C.
This fibreglass exposed junction wire probe
is ideal for measuring the air temperature of
ovens, hot cupboards and similar appliances.
Response time less than 0.5 of a second.
Maximum probe temperature +350°C.
K
133-382
Ø3.3 x 130mm
penetration probe
Ø3.3 x 300mm
fast response probe
oven probe
air or gas probe
ribbon surface probe
Ø15 x 130mm
rigid between pack probe
PTFE wire probe
fibreglass wire probe
Ø1.5 x 1000mm
CATERING THERMOMETERS
hand held probes
15
CATERING THERMOMETERS
MiniTherma™ K kit
thermocouple thermometer
3 interchangeable type K thermocouple probes
3 water resistant offering IP65 protection
The MiniTherma K thermometer is designed for versatility and ease of use.
The instrument accepts a miniature type K thermocouple plug that enables
a variety of interchangeable probes to be used. The thermometer
incorporates a clear digital display with a precise read-out of
temperature over the range of -59.9 to +1399°C with a 0.1°C
resolution between -59.9 to +199.9°C thereafter 1°C.
specification
The unit features a display hold function and both low
battery and open circuit indication are also displayed, when
applicable. An auto-power off facility turns the instrument
off after four minutes, maximising battery life.
The MiniTherma K is lightweight, at less than 40 grams.
The case is manufactured from high impact ABS plastic
designed to cope with routine day-to-day applications. Each
MiniTherma K is supplied as a kit with a penetration probe
(133-161) and battery, all in a protective PVC zip wallet.
order code
810-990
description
MiniTherma K kit
°C
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
HOLD
MiniTherma K
-59.9 to +1399°C
0.1°C (1°C above +199.9°C)
±1% or ±1°C over the full range
3 volt CR2032 lithium coin cell
100 hours
K thermocouple
custom LCD
19 x 40 x 76mm
36 grams
AUTO
OFF
IP65
plug-mounted probes
These plug-mounted probes are mounted directly into miniature type K thermocouple plugs. This provides an
economical solution to many temperature measuring applications and allows the option of one-handed operation.
order code
penetration probe
Ø3.3 x 120mm
fast response probe
Ø1mm tip x 90mm
air or gas probe
Ø3.3 x 120mm
ribbon surface probe
Ø8 x 120mm
FEP (plastic) probe
Ø3.2 x 40mm
16
This plug-mounted, stainless steel, penetration probe is
strong and versatile. Ideal for a variety of applications
i.e. liquids or semi-solids. Response time less than three
seconds. Maximum tip temperature +250°C.
133-161
This plug-mounted, fast-response, penetration probe
is designed for measuring the temperature of soft
substances and liquids. Response time less than one
second. Maximum tip temperature +250°C.
133-151
This plug-mounted air/gas probe has a perforated
stainless steel tip for fast response. Ideal for measuring
the temperature of air conditioning. Response time less
than one second. Maximum tip temperature +250°C.
133-301
This plug-mounted stainless steel surface probe is ideal
for measuring metallic surfaces. A right-angled version is
also available, order code 133-046. Response time less
than one second. Maximum tip temperature +250°C.
133-045
This FEP (plastic) penetration probe, for measuring
food temperatures, was originally designed for airlines
where safety is paramount. Response time less than
three seconds. Maximum tip temperature +250°C.
133-155
thermometer kits
3 choice of 0.1°C or 1°C resolution
3 value-for-money - FREE log book, Probe-Wipes & carrying case
These thermometer and probe kits are designed for the food and catering industry. For a full specification on each
thermometer see pages 12 and 14. Each kit is supplied in a useful ABS carrying case with a temperature log book,
a tub of 70 Probe-Wipes, battery and a traceable certificate of calibration.
ETI 2001 catering kit 0.1°C or 1°C
Each kit contains
1 x 221-201 ETI 2001 thermometer
1 x 123-160 penetration probe
1 x 133-362 PTFE wire probe
1 x 831-100 temperature log book
1 x 836-022 mini tub of 70 Probe-Wipes
1 x 839-040 9 volt PP3 battery
1 x 834-100 ABS carrying case
CATERING THERMOMETERS
catering
order code description
860-015
2001 thermometer kit
a traceable certificate of calibration is included
ETI 2003 catering kit 1°C
Each kit contains
1 x 221-033 ETI 2003 thermometer
1 x 123-160 penetration probe
1 x 133-362 PTFE wire probe
1 x 831-100 temperature log book
1 x 836-022 mini tub of 70 Probe-Wipes
1 x 839-040 9 volt PP3 battery
1 x 834-100 ABS carrying case
order code description
860-025
2003 thermometer kit
a traceable certificate of calibration is included
Therma 20 catering kit 0.1°C
Each kit contains
1 x 226-020 Therma 20 thermometer
1 x 174-166 penetration probe
1 x 170-372 air wire probe
1 x 831-100 temperature log book
1 x 836-022 mini tub of 70 Probe-Wipes
1 x 839-040 9 volt PP3 battery
1 x 834-100 ABS carrying case
order code description
860-120
Therma 20 thermometer kit
a traceable certificate of calibration is included
17
CATERING THERMOMETERS
ThermaData™ logger
recording thermometers
3 waterproof housing offering IP66/67 protection
3 meets EN 12830, S & T , C & D, 1
3 range -40 to +85°C or +125°C
3 resolution 0.1°C, high accuracy ±0.5°C
The ThermaData logger mk II series consists of a comprehensive
range of portable data-loggers utilising the latest in electronic
technology. The ThermaData loggers are housed in waterproof,
ergonomic cases that are designed to meet IP66/67 protection.
The ThermaData logger mk II range offers the choice of either
blind data-loggers or data-loggers with a LCD display. Other
options include internal and external temperature sensors/probes.
The remote temperature probes are supplied with a one metre
PVC/PFA lead.
Each logger incorporates a red and green LED, the flashing green
LED indicates that the logger is active/logging and the flashing
red LED indicates that your customised pre-set alarms have been
exceeded.
ThermaData logger Mk II software
The ThermaData logger is connected to a PC via a USB cradle. By clicking the relevant icon the data can be
downloaded and displayed either as a graph, table or summary. The information can be analysed by zooming in,
storing to disc or exporting as a text (.txt) file to other software packages.
The ThermaData logger software incorporates several useful functions, including the ability to display two traces on
a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
There are also options for customers requiring alternative languages.
The ThermaData logger software is backward compatible, therefore will
work equally as well with the older style ThermaData loggers as well as the
new mk II models. The software is both powerful and sophisticated, yet userfriendly enabling temperature data to be organised and analysed to provide
management information. The software allows the user to programme the
logging sample/interval rate (0.1 to 255 minutes), the real-time clock, °C
or °F, delayed start (maximum 23 hours, 59 minutes) or select a magnetic
start option. It is also possible to include a 32-character user ID for each
logger.
By selecting continuous logging in the software options, it is possible to start the
ThermaData logger only once and never have to reset its parameters again,
even if downloaded regularly. Unlike most low cost loggers, the ThermaData
logger will continue recording during and after downloading the data.
The ThermaData logger software is supplied with each USB cradle. Please
note: when initially ordering loggers it is necessary to order at least one
ThermaData logger cradle.
°C/°F
18
IP66/67
ThermaData logger - model TD
blind with an internal sensor
LCD with an internal sensor
specification model TD
specification model TB
order code
295-001
range
resolution
accuracy
memory
sample rate
battery
battery life
display
dimensions
weight
-40 to +85°C
0.1°C
±0.5°C
4000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
18 months
2 LEDs
Ø76 x 23mm
82 grams
description
model TB
order code
296-001
range
resolution
accuracy
memory
sample rate
battery
battery life
display
dimensions
weight
-30 to +85°C
0.1°C
±0.5°C
4000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
18 months
10mm LCD/2 LEDs
Ø76 x 23mm
91 grams
description
model TD
ThermaData logger - model TBF
ThermaData logger - model TDF
blind logger with an external fixed sensor
LCD with an external fixed sensor
specification model TDF
specification model TBF
order code
295-101
range
resolution
accuracy
memory
sample rate
battery
battery life
display
dimensions
weight
-40 to +125°C
0.1°C
±0.5°C
4000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
18 months
2 LEDs
Ø76 x 23mm
93 grams
order code
description
model TBF
296-101
range
resolution
accuracy
memory
sample rate
battery
battery life
display
dimensions
weight
-40 to +125°C
0.1°C
±0.5°C
4000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
18 months
10mm LCD/2 LEDs
Ø76 x 23mm
102 grams
description
model TDF
ThermaData logger - model TB1F
ThermaData logger - model TD1F
blind with an internal & external fixed sensor
LCD with an internal & external fixed sensor
specification model TD1F
specification model TB1F
order code
295-011
range
resolution
accuracy
memory
sample rate
battery
battery life
display
dimensions
weight
-40 to +85/125°C
0.1°C
±0.5°C
2 x 2000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
18 months
2 LEDs
Ø76 x 23mm
94 grams
order code
description
model TB1F
296-011
USB cradle, software & start magnet
cradle, software & start magnet
-30 to +85/125°C
0.1°C
±0.5°C
2 x 2000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
18 months
10mm LCD/2 LEDs
Ø76 x 23mm
103 grams
description
model TD1F
An optional protective silicone boot
is available for the ThermaData
loggers.
The ThermaData loggers are
supplied with white seals but
customers can purchase coloured
seals, available in packs of seven
colours: black, blue, brown, green,
red, white and yellow.
Each USB cradle is
supplied with a one
metre PVC lead.
293-804
range
resolution
accuracy
memory
sample rate
battery
battery life
display
dimensions
weight
ThermaData logger accessories
The ThermaData logger
cradle is supplied
complete with the
ThermaData logger PC
software and a start
magnet.
order code description
CATERING THERMOMETERS
ThermaData logger - model TB
order code
296-990
830-270
description
pack of seven coloured seals
protective silicone boot
19
CATERING THERMOMETERS
ThermaData™ logger
blind recording thermometers
3 blind recording thermometer & data-logger
3 visual display of high & low alarm status
3 range -40 to +85°C
3 simple visual inspection shows if limits exceeded
The ThermaData logger is a cost effective, self-contained temperature data-logger or blind recording thermometer
that is designed to record the temperature of the surrounding environment. The ThermaData logger is housed in a
water-resistant polyethylene case and incorporates two LED status indicators.
The ThermaData logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes),
the real-time clock, °C or °F, delayed start (maximum 23 hours, 59 minutes) or push-button start and a 12-character
user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to
check the calibration of loggers and make minor adjustments in 0.5°C increments (maximum ±3°C).
By selecting continuous logging in the software options, it is possible to start the ThermaData logger only once and
never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData
logger will continue recording during and after downloading the data.
The user can also set within the software, high and low alarm values for a specific application. A button push will
allow a simple visual inspection of the unit to show if either of these limits has been exceeded. A flashing red LED
will warn the user that the alarm limits have been exceeded (reject) or a flashing green LED will advise the user that
the alarm limits have not been exceeded (accept).
ThermaData PC software
The ThermaData logger is connected to a PC via a serial or USB port lead. By clicking on the relevant icon the data
can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by
zooming in, storing to disc or exporting to other software packages.
colour-coded data-loggers
The ThermaData loggers are available in a variety of coloured
cases; blue, white, yellow, green, red, brown and black. The
colour-coded cases help to prevent cross-contamination by
allowing the user to allocate a colour to a specific product or
application. For example, in the food industry, green may be
used for salads, blue for fish and red for raw meats etc.
Other applications include different coloured loggers for easy
identification in, eg, the building and construction industry where
loggers can often blend in with the environment.
specification
order code description
20
293-001
293-105
293-205
293-305
293-405
293-605
293-701
293-101
293-104
ThermaData logger - blue
ThermaData logger - white
ThermaData logger - yellow
ThermaData logger - green
ThermaData logger - red
ThermaData logger - brown
ThermaData logger - black
software & RS232 serial lead
software & RS232 USB lead
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
ThermaData logger
-40 to +85°C
0.5°C
±1°C (±0.5°C with calibration utility)
2,048 temperature readings
1 minute to 255 minutes
3.6 volt ½ AA lithium coin cell
minimum 3 years
Ø55 x 25mm
45 grams
°C
CATERING THERMOMETERS
ThermaData™ logger
humidity & temperature recording meter
3 display toggles between humidity and temperature
3 visual display of high & low alarm status
3 records up to a maximum of 16,000 readings
3 simple visual inspection shows if limits exceeded
The new humidity and temperature ThermaData loggers are
portable data-loggers that measure and record both temperature
and relative humidity (%rh) over the range of -20 to +85°C and
0 to 100 %rh.
At programmable intervals, the loggers will record simultaneously
both temperature and humidity, recording up to a maximum of
16,000 readings (8,000 humidity and 8,000 temperature).
The ThermaData loggers offer the choice of either a blind logger
(HTB) or a LCD display logger (HTD), both options include internal
humidity and temperature sensors.
Each logger incorporates a red and green LED, the flashing green
LED indicates that the logger is active/logging and the flashing
red LED indicates that your customised pre-set alarms have been
exceeded.
The humidity and temperature ThermaData loggers are suitable
for a diverse range of applications which include food storage
and QA monitoring.
ThermaData logger software
The ThermaData logger is connected to a PC via a USB cradle. By clicking the relevant icon, the data can be
downloaded and displayed either as a graph, table or summary. The information can be analysed by zooming in,
storing to disc or exporting in Excel (.xls) or as a text (.txt) file to other software packages.
Please note: when initially ordering loggers it is necessary to order at least one ThermaData logger cradle.
specification
range
resolution
accuracy
hysteresis
sensor type
memory
sample rate
battery
battery life
display
dimensions
weight
order code
295-061
296-061
293-804
description
ThermaData logger HTB
ThermaData logger HTD
USB cradle, software & magnet
temperature
humidity
-20 to +85°C
0 to 100 %rh
0.1°C
0.1 %rh
±0.5°C (0 to +45°C)
±2 %rh @ +25°C (10 to 90 %rh)
±1°C (-20 to +70°C)
±1.5°C (+70 to +85°C)
n/a
±1 %rh
silicon bandgap
capacitance polymer
2 x 8,000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium coin cell
minimum 2 years
10mm LCD - toggles every 6 seconds/2 LEDs
Ø76 x 23mm
80 grams
°C/°F
%rh
21
CATERING THERMOMETERS
IR-Chill
infrared thermometer
3 instant reading of chilled or frozen foods
3 records maximum & minimum readings
3 minimal ambient effect in cold environments
3 compact, pocket-sized & simple to use
The IR-Chill thermometer is designed to measure the temperature of chill cabinets, freezers and cold storage units.
Simply aim the thermometer at the target and press the measurement button to display the surface temperature
instantly, with little ambient effect. The IR-Chill indicates temperature over the range of -9.9 to +219.9°C with a
resolution of 0.1°C. Each unit incorporates maximum and minimum temperature functions together with an auto
power off facility that automatically turns the instrument off after 15 seconds, maximising battery life. A lock function
is included for continuous temperature measurement, this is particularly useful when scanning a number of products
in chill cabinets. The distance to target ratio is 1:1 therefore the thermometer should be positioned as close to the
target as possible. The default emissivity is 0.95 but is adjustable from 0.01 to 1, so you can point and measure
just about any surface.
The IR-Chill is perfect for supermarkets, food processors and general purpose applications. Whilst the IR-Chill is
cheaper than many infrared gun-type thermometers, it out-performs most in low temperature applications.
why use an IR-Chill thermometer?
The accuracy of electronic infrared (IR) thermometers is often affected by the temperature of the environment in
which they are being used. Large changes in the ambient temperature can introduce errors in the readings of the
IR thermometer. When an IR thermometer is first taken into a refrigerated space, the readings may be as much as
five or six degrees different. If the IR thermometer is allowed to acclimatise to the new ambient temperature before
being used, it will provide fairly accurate readings.
Most IR thermometers are fitted with a lens to focus energy on the IR sensor. Many use a Fresnel lens made of plastic
materials. These are particularly susceptible to thermal shock. Some IR thermometers use a Mica lens, these are
less susceptible to thermal shock but will still display an error of a few degrees.
The IR-Chill is designed to be used only a few inches from the surface being measured, so the lens is eliminated
completely. The electronics incorporate an accurate temperature compensation circuit to minimise thermal drift.
Therefore, the IR-Chill gives maximum reading accuracy in changing ambient temperatures. This means that you
can come and go between cold and warm environments and take accurate temperatures on the move.
specification
order code
814-090
22
range
resolution
accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
description
IR-Chill thermometer
IR-Chill
-9.9 to +219.9°C
0.1°C (-9.9 to +199.9°C) otherwise 1°C
±1°C (0 to +64.9°C) otherwise ±1.5%
target radio 1:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell
40 hours
custom LCD
37 x 40 x 113mm
40 grams
°C
MAX/MIN
AUTO
OFF
thermometer
3 compact non-contact thermometer
3 0.95 default emissivity - adjustable
The TN1 is a non-contact infrared thermometer. Simply aim the thermometer at
the target and press the measurement button to display the surface temperature
instantly. The TN1 indicates temperature over the range of -33 to +220°C
with a resolution of 0.1°C and is switchable between °C/°F.
Each unit incorporates maximum and minimum
temperature functions together with an auto
power off facility that automatically turns the
instrument off after 15 seconds, maximising
battery life and a lock function for continuous
temperature measurement. The distance to
target ratio is 1:1 therefore the thermometer
should be positioned as close to the target as
possible. The default emissivity is 0.95 but can
be changed from 0.01 to 1.
specification
range
resolution
infrared accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
TN1
-33 to +220°C
0.1°C or °F (switchable)
±2% of reading or ±2°C whichever is greater
target ratio 1:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell
40 hours continuous use
custom LCD
18 x 37 x 68mm
32 grams
order code description
814-050
TN1 infrared thermometer
°C/°F
MAX/MIN
CATERING THERMOMETERS
TN1 - infrared
AUTO
OFF
TN2 - infrared
thermometer
3 including laser alignment
3 0.95 default emissivity - adjustable
The TN2 infrared thermometer incorporates laser alignment. Simply aim the TN2
at the target and press the read button to display the surface temperature instantly
over the range of -33 to +250°C with a resolution of 0.1°C/°F (switchable).
The distance to target ratio is 6:1 and therefore
the thermometer should be positioned as close
to the target as practical without touching. The
minimum target size is Ø25mm for accurate
temperature measurement.
Each unit incorporates maximum and minimum
temperature functions together with an auto
power off facility that automatically turns the
instrument off after 15 seconds, maximising
battery life and a lock function for continuous
temperature measurement.
order code description
814-055
TN2 infrared thermometer
specification
range
resolution
infrared accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
TN2
-33 to +250°C
0.1°C or °F (switchable)
±2% of reading or ±2°C whichever is greater
target ratio 6:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell
40 hours continuous use
custom LCD
18 x 50 x 100mm
62 grams
°C/°F
MAX/MIN
AUTO
OFF
23
CATERING THERMOMETERS
RayTemp™ 3
infrared thermometer
3 simple push button operation
3 range -59.9 to +499.9°C
3 assured accuracy of ±1°C over the range of 0 to +65°C
3 ideal instrument for catering & food processing
The RayTemp 3 infrared thermometer is compact, lightweight and easy to use. Simply aim,
pull the trigger and display the temperature of the item being measured. In addition the
LCD will display the maximum temperature.
The RayTemp 3 measures temperature over the range of -59.9 to +499.9°C with an assured
accuracy of ±1°C over the range of 0 to +65°C, outside of this range ±2°C of reading in an
ambient temperature of between +15°C and +25°C, with a repeatability of ±1°C of reading.
The instrument incorporates a clear, easy to read, LCD display with low battery, laser and backlight
indication and an auto power off facility that turns the instrument off after 15 seconds, maximising battery life.
The RayTemp 3 is ideal for measuring food surface temperatures, eliminating the need to touch or contaminate the
food you are measuring, avoiding the risk of cross-contamination. The unit can be used by anyone as there is no
need to focus or adjust the instrument.
Each RayTemp 3 features a single push button, allowing the user to select °C or °F. The thermometer also
incorporates laser assisted alignment as standard, to assist in pin-pointing the area of measurement.
The unit incorporates an 11:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.97
making it more suitable for chilled and frozen foods, although this infrared thermometer can be used
for a wide range of other applications.
optional accessories
The protective PVC pouch helps to protect the instrument against accidental
damage. A hard ABS carrying case is also available, ideal for transporting
the thermometer safely. The pouch and carrying case can also be used for
the RayTemp 4 and 8.
The Comparator provides an inexpensive way of checking the temperature
of infrared thermometers when used in conjunction with a Reference
thermometer (see page 87).
specification
range
resolution
infrared accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
RayTemp 3
-59.9 to +499.9°C
0.1°C or °F (-9.9 to +199.9°C) otherwise 1°C
±1°C (0 to +65°C) otherwise ±2°C
target ratio 11:1
0.97 fixed
2 x AAA alkaline
140 hours continuous use
custom LCD
39 x 72 x 175mm
180 grams
order code description
24
814-040
830-040
834-740
814-132
RayTemp 3 thermometer
protective PVC pouch
small hard carrying case
aluminium Comparator
°C/°F
MAX
AUTO
OFF
BACKLIT
infrared & foldaway probe thermometer
3 two instruments in one
3 0.1°C resolution
3 range - 32.9 to +219.9°C
3 simple to use
The Combo is two instruments in one compact unit - a digital infrared non-contact thermometer and a traditional
probe thermometer that incorporates a foldaway penetration probe. Each unit incorporates an auto power off
facility that automatically turns the instrument off after 15 seconds, maximising battery life plus a lock function for
continuous temperature measurement.
CATERING THERMOMETERS
Combo
infrared thermometer
Simply aim the infrared thermometer at the target and press the measurement button
to display the surface temperature over the range of -32.9 to +219.9°C with a
resolution of 0.1°C/°F.
The Combo IR thermometer incorporates a max/min temperature function.
The distance to target ratio is 5:1 and therefore the thermometer should
be positioned as close to the target as possible. The default emissivity
is 0.95 but can be changed from 0.01 to 1, if required.
foldaway probe thermometer
Alternatively, it is possible to take liquid or semi-solid
product temperatures, using the Combo's stainless
steel penetration probe (Ø3.3 x 120mm). The probe
conveniently folds back through 180 degrees into
the side of the instrument when not in use.
optional accessories
The protective wallet or zip pouch, both with belt loops, help to protect the
instrument against accidental damage. The black acrylic wall bracket stores
the instrument safely (screws not supplied).
specification
range
resolution
infrared accuracy
probe accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
Combo
-32.9 to +219.9°C
0.1°C or °F (switchable)
±2% of reading or ±2°C whichever is greater
±1% of reading or ±1°C whichever is greater
target ratio 5:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell
40 hours continuous use
custom LCD
25 x 40 x 156mm
75 grams
order code description
814-065
830-110
830-001
832-200
Combo thermometer
protective wallet
zip pouch
wall bracket
°C/°F
MAX/MIN
AUTO
OFF
25
CATERING THERMOMETERS
EcoTemp™
max/min thermometer
3 detachable penetration probe
3 max/min, hold & °C/°F functions
The EcoTemp digital thermometer features a large, easy to read, LCD display with
display hold and max/min memory functions. The unit measures temperature
over the range of -49.9 to +199.9°C with a 0.1°C/°F resolution. Both open
circuit and low battery indication are displayed, when applicable.
This thermometer is ideal for monitoring cooking, cooling and food holding
temperatures as part of HACCP, due diligence and health and safety
procedures.
Each EcoTemp thermometer is supplied with a detachable,
rigid, stainless steel food penetration probe (Ø3.5 x
125mm) with a Ø3.2 x 750mm silicone connecting lead.
Optional, alternative probes are available.
order code description
810-950
810-951
810-952
810-954
810-955
830-215
EcoTemp thermometer & probe
replacement penetration probe
optional 3 metre wire probe
optional 1.5 metre silicone probe
optional penetration oven probe
protective PVC boot
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
°C/°F
EcoTemp
-49.9 to +199.9°C
0.1°C or 0.1°F
±1°C (-49.9 to +149.9°C)
2 x 1.5 volt AAA
10,000 hours
thermistor
custom 22mm LCD
20 x 58 x 165mm
115 grams including probe
HOLD
MAX/MIN
AUTO
OFF
ThermaLite™
pocket-sized thermometer
3 simple one-handed operation
3 supplied with probe cover & wall bracket
The ThermaLite digital thermometer is a truly pocket-sized thermometer measuring less
than 185mm overall and weighing less than 50 grams including battery, probe and cover.
Despite its modest size, the ThermaLite thermometer incorporates a clear LCD display.
The thermometer displays temperature over the range of -49.9 to +149.9°C with a 0.1°C
resolution and an accuracy of better than ±1°C.
truly pocket-sized
The instrument incorporates a simple on/off push button
and an auto power off facility that turns the instrument off
automatically after 10 minutes, maximising battery life.
The unit is housed in a high impact ABS plastic, designed
to cope with routine day-to-day food and catering
applications. The pointed, Ø3.3 x 44mm stainless steel
penetration probe is ideal for measuring the temperature
of food and semi-solid materials.
order code
226-010
26
description
ThermaLite thermometer
specification
ThermaLite
range
-49.9 to +149.9°C
resolution
0.1°C
accuracy
±1°C
battery
3 volt CR2032 lithium coin cell
battery life
5,000 hours
sensor type
thermistor
display
8mm LCD
dimensions
17 x 28 x 185mm
weight
47 grams
a traceable certificate of calibration is included
°C
AUTO
OFF
folding probe thermometer
3 water resistant pocket-sized instrument
3 8,000 hours continuous battery use
The water resistant Gourmet folding probe thermometer (FPT) is
an easy to use instrument, ideal for monitoring cooking, cooling
and food holding temperatures as part of HACCP and health and
safety procedures. The unit measures temperature over the range
of -49.9 to +149.9°C with a 0.1°C resolution and incorporates
two push button switches, max/min and on/off.
The Gourmet's battery will last up to 8,000 hours continuous use
or, if used two hours a day, seven days a week, for a minimum of
10 years. Each unit incorporates a stainless steel, food penetration
probe (Ø3.5 x 110mm) that conveniently folds back into the side
of the instrument when not in use, rotating through 180 degrees,
allowing the user to transport the instrument safely.
A protective wallet and zip pouch, both with a belt loop, are
available.
order code
810-730
830-110
830-001
description
Gourmet FPT thermometer
protective wallet
zip pouch
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
°C/°F
Gourmet FPT
-49.9 to +149.9°C
0.1°C or 0.1°F (switchable)
±1°C
1.5 volt AAA
8,000 hours
thermistor
15mm LCD
19 x 52 x 155mm
76 grams
MAX/MIN
AUTO
OFF
CATERING THERMOMETERS
Gourmet
IP65
Multi-function
thermometer
3 displays both the temperature & alarm set temperature
3 supplied complete with stainless steel penetration probe
This low cost digital Multi-function thermometer is compact and
easy to use. The thermometer features an easy to read LCD that
displays both the temperature and the alarm set temperatures,
ideal for restaurants, bars and cafes as an economical solution
for temperature measurement applications.
The thermometer incorporates a display hold facility and a max/
min memory function together with an adjustable audible high/
low temperature alarm. The unit indicates temperature over the
range of -49.9 to +149.9°C with a 0.1°C or 0.1°F resolution.
The rear of the case incorporates a useful foldaway worktop stand,
a pocket clip and a probe storage clip. Each unit is supplied with
a pointed, stainless steel, penetration probe (Ø3.3 x 125mm)
with a one metre PVC connecting lead and probe cover.
order code
810-927
description
Multi-function thermometer
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
°C/°F
HOLD
Multi-function
-49.9 to +149.9°C
0.1°C or 0.1°F (switchable)
±1°C (-20 to +150°C)
1.5 volt AAA
5,000 hours
thermistor
custom LCD
32 x 86 x 116mm
98 grams
MAX/MIN
AUTO
OFF
AUDIBLE
ALARM
27
CATERING THERMOMETERS
pocket-sized
thermometers
pen-shaped thermometer
T-shaped thermometer
This compact thermometer measures temperature over
the range of -49.9 to +149.9°C. The thermometer
features a Ø3.5 x 120mm pointed stainless steel probe.
The instrument incorporates a °C/°F switch and a display
hold feature. Each unit is supplied with a probe cover
that incorporates a pocket clip.
This compact thermometer measures temperature over
the range of -49.9 to +149.9°C. The thermometer
features a Ø3.5 x 120mm pointed stainless steel probe.
The instrument incorporates a °C/°F switch and a display
hold feature. Each unit is supplied with a probe cover
that incorporates a pocket clip.
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
order code
810-260
pen-shaped
-49.9 to +149.9°C
0.1°C/°F
±1°C
1.5 volt (839-044) - 5,000 hours
6mm LCD
20 x 20 x 190mm
17 grams
description
pen-shaped penetration probe
dial-shaped thermometer
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
order code
810-265
T-shaped
-49.9 to +149.9°C
0.1°C/°F
±1°C
1.5 volt (839-044) - 5,000 hours
6mm LCD
20 x 58 x 145mm
16 grams
description
T-shaped thermometer
water resistant thermometer
This water resistant thermometer
features a Ø3.5 x 120mm pointed
stainless steel food penetration
probe.
This dial-shaped thermometer measures temperature
over the range of -49.9 to +149.9°C. The thermometer
features a Ø3.5 x 125mm pointed stainless steel probe.
The instrument incorporates a °C/°F switch and a display
hold feature. Each unit is supplied with a probe cover
that incorporates a pocket clip.
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
order code
810-860
28
dial-shaped
-49.9 to +149.9°C
0.1°C/°F
±1°C
1.5 volt (839-093) - 5,000 hours
6mm LCD
35 x 35 x 150mm
14 grams
description
dial-shaped thermometer
The unit measures temperature over
the range of -49.9 to +199.9°C
with a resolution of 0.1°C/°F.
The thermometer features three
easy to use buttons with max/
min, °C/°F and on/off.
The thermometer is supplied
with a probe cover that
incorporates a pocket clip.
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
order code
810-270
water resistant
-49.9 to +199.9°C
0.1°C/°F
±1°C (-20 to +150°C)
1.5 volt (839-044) - 5,000 hours
8.5mm LCD
Ø40 x 17 x 170mm
28 grams
description
water resistant thermometer
thermometers
dial-shaped thermometer
T-shaped thermometer
This dial-shaped thermometer measures temperature
over the range of -49.9 to +199.9°C. The thermometer
features a Ø3.5 x 120mm pointed stainless steel probe.
The instrument incorporates a max/min memory function,
a display hold feature and is °C/°F switchable. Each unit
is supplied with a probe cover and pocket clip.
This compact thermometer measures temperature over
the range of -49.9 to +199.9°C. The thermometer
features a Ø3.5 x 120mm pointed stainless steel probe.
The instrument incorporates a max/min memory function,
a display hold feature and is °C/°F switchable. Each unit
is supplied with a probe cover and pocket clip.
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
order code
810-245
dial-shaped
-49.9 to +199.9°C
0.1°C/°F
±1°C
1.5 volt (839-093) - 5,000 hours
6mm LCD
Ø35 x 150mm
15 grams
description
dial-shaped thermometer
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
order code
810-240
T-shaped
-49.9 to +199.9°C
0.1°C/°F
±1°C
1.5 volt (839-044) - 5,000 hours
6mm LCD
20 x 58 x 155mm
20 grams
description
T-shaped thermometer
T-shaped thermometer
pen-shaped thermometer
This robust waterproof thermometer offers IP66/67
protection and features a max/min memory and display
hold function. The unit is housed in a polycarbonate
case with a strong, stainless steel, penetration probe,
Ø5 x 125mm with a reduced tip (Ø3.5 x 20mm) to
improve response time.
This compact pen-shaped thermometer is housed in a
robust, soft-touch ABS case that incorporates a pocket
clip. The thermometer features a max/min memory
function and low battery indication. The Ø3.5 x 120mm
pointed stainless steel penetration probe is ideal for
various applications.
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
T-shaped
-49.9 to +149.9°C
0.1°C
±1°C
1.5 volt (839-044) - 5,000 hours
12mm LCD
30 x 88 x 170mm
50 grams
order code description
810-285
T-shaped waterproof thermometer
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
order code
810-300
CATERING THERMOMETERS
pocket-sized
pen-shaped
-50 to 150°C
0.1°C (-19.9 to 149.9°C)
±1°C
1.5 volt (839-093) - 3,000 hours
8mm LCD
22 x 30 x 215mm
26 grams
description
pen-shaped thermometer
29
CATERING THERMOMETERS
max/min probe
thermometer
3 detachable penetration probe
3 max/min, hold & °C/°F functions
This digital max/min thermometer features an easy
to read LCD with display hold and max/min memory
functions. The unit measures temperature over the range
of -49.9 to +149.9°C with a 0.1°C/°F resolution.
The thermometer features a useful foldaway worktop
stand. Additionally, the thermometer incorporates a
magnetic pad and a keyhole slot for attaching the unit
to an appliance or for wall-mounting. The max/min
thermometer is powered by a single AAA battery with a
life expectancy of approximately 5,000 hours. Each unit
is supplied with a detachable, stainless steel, penetration
probe (Ø3.5 x 120mm) with a probe cover and one
metre PVC connecting lead.
order code
810-930
810-935
specification
range
resolution
accuracy
battery & battery life
sensor type
display
dimensions
weight
max/min
-49.9 to +149.9°C
0.1°C or 0.1°F (switchable)
±1°C ±1 digit
1.5 volt AAA - 5,000 hours
thermistor
12.7mm LCD
20 x 65 x 97mm
100 grams
description
max/min thermometer
replacement probe
°C/°F
HOLD
MAX/MIN
ThermaGuard™
telephone & power warning system
3 monitoring temperature - range -19.9 to +49.9°C
3 stores four emergency telephone numbers
The ThermaGuard continuously monitors the temperature and the power
status and reports to the user, via a telephone call, if the alarm settings have
been activated. Alternatively, it is possible to telephone the ThermaGuard
and it will report the current, the max/min temperatures and the power status.
Each unit is supplied with a small thermistor sensor with 10 metres of PVC
lead. The ThermaGuard monitors temperature over the range of -19.9 to +49.9°C with a resolution of 0.1°C or
0.1°F. The unit's custom LCD indicates the real date/time, the current temperature, the max/min temperature since
last reset (24-hours, seven days or manual) and the current power status.
The ThermaGuard can store up to four, 20-digit telephone numbers
in its memory and will dial up sequentially each stored emergency
number (three times) or until someone answers the call and enters
the 4-digit PIN code. The system incorporates a number of
programmable features including the ability to enter a ten second
personal identification message, a user PIN code, high and low
alarm temperatures and an alarm time delay feature to help avoid
false alarms. Each ThermaGuard incorporates a four-hour battery
back-up power supply for emergency use when the power failure
alarm is activated. The ThermaGuard is ideal for 24/7 monitoring
of temperature sensitive equipment and storage areas.
order code description
810-570
ThermaGuard warning system
30
specification ThermaGuard
range
-19.9 to +49.9°C
resolution
0.1°C or 0.1°F (programmable)
accuracy
±2°C ±1 digit
power
230/115 volt AC/DC transformer
sensor type thermistor
display
custom LCD
dimensions 40 x 108 x 165mm
weight
476 grams
a full technical data-sheet is available on request
°C/°F
HOLD
MAX/MIN
AUDIBLE
ALARM
thermometers
Ø52mm dial thermometer
vertical spirit-filled thermometer
This spirit-filled vertical fridge/freezer
thermometer features clearly marked
colour-coded zones for ease of
reading.
This easy to read fridge or freezer thermometer has a
Ø52mm dial, indicating temperature over a range of
-30 to +30°C in 1°C divisions and incorporates colourcoded zones. The ABS case incorporates a plastic hook
to hang from a shelf.
The thermometer indicates temperature
over the range of -30 to +40°C in 1°C
divisions.
The ABS case measures 150 x 24mm
and incorporates a plastic hook to
hang from a shelf.
order code description
800-100
Ø52mm dial thermometer
order code description
803-000
vertical spirit-filled thermometer
Ø70mm dial thermometer
horizontal spirit-filled thermometer
This fridge or freezer thermometer has a Ø70mm dial,
indicating temperature over a range of -30 to +30°C
in 1°C divisions and incorporates colour-coded zones.
The ABS case measures 70 x 60mm. The thermometer
can be free-standing or hung from a shelf.
This spirit-filled fridge/freezer thermometer indicates
temperature over a range of -30 to +40°C in 1°C
divisions with colour-coded zones. The ABS housing
measures 130 x 53mm. The thermometer can be freestanding or hung from a shelf.
order code description
800-000
Ø70mm dial thermometer
order code description
803-050
horizontal spirit-filled thermometer
Ø50mm dial thermometer
clear spirit-filled thermometer
This stainless steel, fridge or freezer thermometer has a
Ø50mm dial, indicating temperature over a range of
-30 to +30°C. The housing measures 60 x 70mm and
can be free-standing or hung from a shelf.
This spirit-filled fridge/freezer thermometer is encased in a
clear ABS housing (10 x 30 x 122mm). The thermometer's
colour-coded zones indicate temperature over a range
of -40 to +20°C/°F. The unit is designed to be hung
from a shelf or wall-mounted (brackets supplied).
order code
800-923
description
Ø50mm dial thermometer
CATERING THERMOMETERS
fridge or freezer
order code description
803-925
clear spirit-filled thermometer
31
CATERING THERMOMETERS
fridge or freezer
alarm thermometers
max/min temperature memory
max/min temperature memory
This max/min and alarm fridge
or freezer thermometer features
a large LCD display, indicating
the temperature over the range
of -49.9 to +69.9°C.
This max/min and alarm fridge
or freezer thermometer features
a LCD display, indicating
temperature over the range of
-49.9 to +69.9°C.
The thermometer is housed in
an ABS case and incorporates a
backlight, two temperature sensors, a remote probe with
a one metre PVC lead for the appliance temperature,
and an internal sensor for the air room temperature.
The thermometer is housed in
an ABS case and incorporates
two temperature sensors, a remote probe with a one
metre PVC lead for the appliance temperature, and an
internal sensor for the air room temperature.
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
max/min alarm thermometer
-49.9 to +69.9°C
0.1°C
±1°C
1.5 volt AAA
5,000 hours
custom LCD
15 x 52 x 73mm
48 grams
order code description
810-210
max/min alarm thermometer
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
max/min alarm thermometer
-49.9 to +69.9°C
0.1°C
±1°C
1.5 volt LR44 button cell
8,000 hrs
custom LCD
13 x 48 x 63mm
35 grams
order code description
810-205
max/min alarm thermometer
fridge & freezer
dual sensor alarm thermometer
This versatile fridge and freezer alarm thermometer
enables the user to monitor the temperature of two
appliances simultaneously. The thermometer displays
temperature over the range of -39.9 to +69.9°C with
a 0.1°C resolution and an accuracy of ±1 °C.
The thermometer features a visual and audible
programmable alarm indicating when the temperature
is outside the set limits (default +8°C fridge and
-18°C freezer). The alarm feature also incorporates
a count-up time function which records the length of
time, up to 99 hours and 59 minutes, that the fridge or
freezer thermometer has exceeded the limits. The unit
also incorporates a max/min memory function.
Each thermometer is housed in an ABS case and
incorporates two magnetic pads for appliance
mounting. The unit is powered by two AAA batteries
with a life expectancy of 5,000 hours. Each alarm
thermometer is supplied with two remote temperature
probes, both with a one metre PVC lead.
order code description
810-200
dual sensor alarm thermometer
32
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
alarm thermometer
-39.9 to +69.9°C
0.1°C
±1°C
2 x 1.5 volt AAA
5,000 hours
dual custom LCD
23 x 45 x 135mm
104 grams
°C/°F
MAX/MIN
AUDIBLE
ALARM
thermometers
These small digital waterproof fridge thermometers
are available in a variety of colours, white, yellow, lime
green, raspberry red, sky blue or burnt orange.
The fridge thermometers indicate temperature over the
range of -9.9 to +49.9 °C with a 0.1°C resolution.
The clear suction pad's pivotal ball enables the unit to
be attached to a fridge from the back or front. Each unit
measures 15 x 41 x 55mm (excluding suction pad).
These fridge thermometers can be part of your HACCP
and due diligence procedures, being used for different
food types or storage areas, reducing the risk of crosscontamination. Alternatively, each fridge, or area within
a fridge, can be given a different colour thermometer
to aid identification.
order code description
810-231
810-232
810-233
810-234
810-235
810-236
fridge thermometer - white
fridge thermometer - yellow
fridge thermometer - lime green
fridge thermometer - raspberry red
fridge thermometer - sky blue
fridge thermometer - burnt orange
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
fridge thermometers
-9.9 to +49.9°C
0.1°C
±1.5°C over full range
1.5 volt LR44 button cell
8,000 hours continuous use
custom LCD
15 x 41 x 55mm
35 grams
°C
CATERING THERMOMETERS
waterproof fridge
IP67
FoodSafe fridge
food simulant thermometer
Most traditional temperature measuring devices in fridges only measure the air
temperature. This is a major problem because cold air is heavier than warm air
and therefore "drops out of the fridge" the moment the door is opened.
why a FoodSafe thermometer?
The FoodSafe food simulant thermometer, on the other hand, is an encased
thermometer that ensures that it indicates temperature similar to that of the
food stored in the fridge or chill cabinet. Therefore it is not subject to the
changes in air temperature that normally occur when the door is opened. It is
the temperature of the food that is important in preventing the growth of food
poisoning bacteria.
The easy to read FoodSafe is ideal for domestic or commercial use, as it is
reliable, robust and hygienic. The thermometer indicates temperature over the
range of -20 to +40°C with an accuracy of ±0.5°C over the range of -5 to
+20°C, 1°C thereafter. The unit is housed in a clear plastic case with colourcoded zones that indicate when the temperature is too warm. The FoodSafe
thermometer measures Ø25mm x 150mm high.
Each FoodSafe thermometer is supplied with a metal hook for hanging in a
fridge.
order code
803-900
description
FoodSafe food simulant thermometer
°C
33
CATERING THERMOMETERS
oven
& microwave thermometers
dial oven thermometer
dial oven thermometer
This stainless steel oven thermometer features a clear
Ø55mm dial with colour-coded zones. The green marker
indicates the minimum temperature that heated display
units should be kept at. The thermometer indicates
temperature over the range of 0 to +300°C in 10°C
divisions. The case measures 45 x 65 x 80mm.
This stainless steel oven thermometer features a
Ø45mm dial with colour-coded zones. The green
marker indicates the minimum temperature that heated
display units should be kept at. The unit indicates
temperature over the range of +50 to +300°C in
10°C divisions. The case measures 40 x 60 x 70mm.
The unit can be free-standing or hung from a shelf and
should be positioned in the middle of the oven for the
most accurate temperature reading.
The thermometer can be free-standing or hung from
a shelf and should be positioned in the middle of the
oven for the most accurate temperature reading.
order code description
800-809
Ø55mm dial oven thermometer
order code description
800-931
Ø45mm dial oven thermometer
microwave thermometer
horizontal oven thermometer
This easy to use, spirit-filled, microwave
thermometer is housed in a high
impact plastic case.
The thermometer indicates
temperature over the range
of +30 to +110°C or +100
to 230°F.
The microwave thermometer is
supplied with a plastic skewer
for insertion into food before
placing the thermometer in the
space provided.
This stainless steel, spirit-filled, oven thermometer
indicates temperature over the range of ambient to
+275°C in 10°C increments. The thermometer's case
measures 35 x 60 x 125mm.
The horizontal oven thermometer can be free-standing
or hung from a shelf and should be positioned in the
middle of the oven for the most accurate temperature
reading.
order code description
803-670
34
microwave thermometer
order code description
800-941
horizontal oven thermometer
& timer
3 dual display - temperature & countdown timer
3 high temperature detachable probe
The combined clock, countdown timer and thermometer displays
both the actual and the alarm temperature over the range of 0 to
+300°C and simultaneously the countdown or the actual time.
The timer will count down or up from/to 23 hours, 59 minutes
and 59 seconds and the real time clock will display the time in
either a 12 or 24-hour format.
The oven thermometer features an audible high alarm that can
be set from the simple to use seven-button keypad. The alarm
temperature is continuously displayed. The unit is designed to sit
on a worktop or can be attached to an appliance via the magnetic
pads at the rear of the instrument.
The thermometer is supplied with a high temperature probe and a
two metre stainless steel braided lead. The probe has an insertion
length of 150mm (Ø4mm) and incorporates a reduced diameter
tip to aid response time.
order code
810-060
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
description
oven thermometer & timer
°C/°F
oven thermometer & timer
0 to +300°C
1°C or 1°F (switchable)
±2°C (0 to +200°C)
1.5 volt AAA
5,000 hours
thermistor
triple custom LCD
21 x 75 x 128mm
89 grams
HOLD
MAX/MIN
CATERING THERMOMETERS
oven thermometer
AUDIBLE
ALARM
timers
count-up/down & countdown
count-up/down timers
These digital countdown/count up timers incorporate
a louder than average audible alarm.
The timers are fully programmable via three, easy to use
push buttons, allowing the user to set the time up to 99
minutes and 59 seconds or 19 hours and 59 minutes.
The timers are powered by a single AAA battery.
Each timer incorporates a pocket clip/foot stand.
order code description
806-100
minutes & seconds timer
806-110
hours & minutes timer
waterproof countdown timer
This countdown timer offers
IP65 waterproof protection.
The large digital display and
loud audible alarm, with
variable volume control, is
ideal in busy professional
kitchens. The countdown
timer is programmable
via the keypad, allowing
the user to set times
up to 99 hours, 99
minutes and 99 seconds.
The timer incorporates
magnetic pads and a
keyhole slot for wallmounting or attaching to
an applicance. The unit
is powered by a single AAA battery.
order code description
806-150
waterproof countdown timer
35
CATERING THERMOMETERS
cooking
thermometers
meat roasting thermometer
frying thermometer
The meat roasting thermometer incorporates a Ø45mm
dial with a pointed Ø4 x 105mm, stainless steel stem.
The thermometer indicates temperature over the range
of 0 to +120°C in 1°C divisions. For the most accurate
temperature recording, insert the thermometer in the
thickest part of the meat or poultry. The dial is clearly
marked for beef, lamb, veal, pork and poultry.
The frying thermometer incorporates a Ø50mm dial and
a pointed, stainless steel Ø4 x 150mm stem. The frying
thermometer indicates temperature over the range of
0 to +300°C in 10°C divisions. For the most accurate
temperature recording, insert the thermometer in the
thickest part of the product. The dial is clearly marked
for meat, poultry, fish and chips.
order code description
800-804
meat roasting thermometer
order code description
800-805
frying thermometer
cook's thermometer
brass sugar & jam thermometer
The cook's thermometer indicates
temperature over the range of +40
to +200°C in 2°C divisions. The
thermometer's scale is clearly marked for
hard crack, soft crack, hard ball, soft ball,
thread and deep fry.
The traditional brass sugar and jam
thermometer indicates temperature over
the range of +40 to +200°C in 2°C
divisions. The thermometer's brass casing
measures 47 x 200mm plus a 40mm
copper handle.
The thermometer's stainless steel casing
incorporates a retaining clip and measures
50 x 240mm plus 65mm plastic handle.
The thermometer's scale is clearly marked
for caramel, crack, hard ball, soft ball,
jam and sterilise.
Simply insert the thermometer into the
liquid being measured and read the
temperature.
Simply insert the thermometer into
the liquid being measured to the level
indicated and read the temperature.
order code description
800-806
cook's thermometer
order code description
800-808
brass sugar & jam thermometer
milk thermometers
dial thermometers
The milk dial thermometers incorporate colour-coded
zones that make them fast and simple to use. Available
with Ø25mm dial x 125mm stem or Ø45mm dial x
125mm or 175mm stem, all supplied with a stainless
steel jug mounting probe clip.
order code
800-810
800-820
800-800
36
description
Ø25 x 125mm milk thermometer
Ø45 x 125mm milk thermometer Ø45 x 175mm milk thermometer These Ø25mm or Ø45mm
dial thermometers feature
a pointed Ø4mm x
130mm stainless steel
stem and are supplied
with a probe cover. Each
dial thermometer is available in three scales. An optional
stainless steel probe holder clip is also available.
order code description
800-811
800-812
800-813
800-801
800-802
800-803
830-220
range
Ø25mm dial -40to +70°C
Ø25mm dial -10to+110°C
Ø25mm dial 0 to+250°C
Ø45mm dial -40to +70°C
Ø45mm dial -10to+110°C
Ø45mm dial 0to+250°C
Ø4mm probe holder clip
accessories
temperature log books
probe holder clips
In commercial kitchens each fridge, freezer or cold
cabinet should have its own temperature log/record
book. ETI log books contain six months' supply of easy
to use record sheets with a wipe clean cover.
These stainless steel probe holders, clip on the top of
a jug or similar to hold in place a temperature probe.
Two models are available, one that will accept either a
Ø3mm or Ø3.3mm probe stem and the other is designed
to work in conjunction with a bi-metal thermometer and
will accept a Ø4mm probe stem. The probe should not
touch the bottom or the sides of the container.
Each log book allows the user to enter three readings per
day consisting of the temperature, the time and the initials
of the person responsible for recording the data.
order code description
order code description
830-220 Ø4mm probe holder clip
830-500 Ø3 & 3.3mm probe holder clip
protective boots
colour-coded protective PVC boots
831-100
A5 temperature log book
Protective boots help to protect instruments against
accidental damage. Different shaped protective PVC
boots are available for the following thermometers:
2000 series, EcoTemp, Thermamite, CaterTemp Plus
and Therma Plus.
A protective silicone boot is also available for the
ThermaData loggers.
order code description
830-205
830-215
830-230
830-242
830-270
PVC boot - 2000 series
PVC boot - EcoTemp
PVC boot - Thermamite
PVC boot - CaterTemp/Therma Plus
silicone boot - ThermaData logger
CATERING THERMOMETERS
catering
These colour-coded PVC boots help to protect instruments
against accidental damage. The colour-coded boots
can be used for the Therma 1, 2, 3, 5 and 12, the
ThermaCheck and the Therma 20 thermometers. For
other protective PVC boots, please see relevant pages.
order code description
830-200
830-201
830-202
830-203
830-204
830-207
830-208
830-209
protective PVC boot - yellow
protective PVC boot - white
protective PVC boot - blue
protective PVC boot - green
protective PVC boot - red
protective PVC boot - brown
protective PVC boot - orange
protective PVC boot - black
37
CATERING THERMOMETERS
catering
accessories
wall brackets
These black acrylic wall brackets store thermometers
safely when not in use (screws not supplied). Alternative
clear polycarbonate wall brackets are also available for
specific thermometers, see individual product pages.
order code
832-110
832-120
832-200
description
Therma series wall bracket
Thermamite wall bracket
Thermapen wall bracket
zip pouches
These protective zip pouches are ideal for transporting
thermometers and probes. The zip pouches are
manufactured from soft PVC imitation leather.
The small zip pouch measures 35 x 65 x 170mm and
the large zip pouch measures 40 x 110 x 300mm.
order code description
830-001
zip pouch - small
830-002
zip pouch - large
batteries
rechargeable & standard
rechargeable batteries & charger
This range of rechargeable
batteries is economical and
ecological. These rechargeable
batteries can be charged up
to 1,000 times and have a long life
compared to standard alkaline batteries.
The charger has the capacity to charge either two or
four AAA or AA batteries (recommended in pairs).
Alternatively, one or two PP3 batteries can be charged.
The charger is not a fast charger which prolongs the
life of the batteries.
order code description
38
839-300
839-310
839-320
839-350
AA rechargeable batteries x 2
AAA rechargeable batteries x 2
PP3 rechargeable battery
battery charger
alkaline, standard & button cell batteries
For the convenience of our customers, ETI supplies a
selection of eco-friendly (green), high performance,
alkaline batteries to fit our thermometers. Button cell
batteries are also available.
order code description
839-040
839-044
839-050
839-057
839-093
839-095
839-100
839-130
839-140
839-150
839-160
839-195
839-250
PP3 alkaline
9 volt
LR44 button cell
1.5 volt
PP3 standard heavy duty
9 volt
357X button cell
1.5 volt
393X button cell
1.5 volt
CR2032 lithium coin cell
3 volt
half AA lithium
3.6 volt
C alkaline
1.5 volt
D alkaline
1.5 volt
AA alkaline
1.5 volt
AAA alkaline
1.5 volt
CR2032 lithium (pack of 2) 3 volt
MN21 alkaline
12 volt
Anti-bacterial wipes are ideal for reducing harmful bacteria in the food industry. Each wipe is pre-saturated with a
broad spectrum anti-bacterial solution that is odourless and does not taint food. The wipes are effective against a
wide range of bacteria including listeria and salmonella.
single sachets of Probe-Wipes
mini tubs of 70 Probe-Wipes
The mini tub is designed to fit into
the user's pocket and incorporates
an easy to dispense flip-top lid.
Each tub contains 70 blue antibacterial Probe-Wipes. Each
blue Probe-Wipe measures 70 x
130mm.
These convenient, single sachet, white anti-bacterial
Probe-Wipes are safe and easy to use.
Each wipe measures 150 x 195mm. The single sachet
wipes are sold in cartons of 100 single sachets.
order code description
836-200
carton of 100 single Probe-Wipes
The wipes are supplied either as
single tubs, order code 836-022
or in cartons of 10 tubs, order
code 836-020.
order code description
836-022
836-020
single tub of 70 mini Probe-Wipes
10 tubs of mini Probe-Wipes
tub of 200 Probe-Wipes
tub of 150 Probe-Wipes
The single tub contains 200 blue antibacterial Probe-Wipes, each measures
130 x 130mm.
Each one-litre tub contains 150
strong, blue anti-bacterial ProbeWipes.
The tubs are supplied individually,
order code 832-052 or order code
836-050 for cartons of six tubs of
200 wipes.
Each Probe-Wipe measures 200
x 235mm.
An optional wall bracket is also
available enabling a single tub of wipes
to be conveniently positioned.
order code
836-052
836-050
832-300
description
single tub of 200 Probe-Wipes
carton of 6 tubs of Probe-Wipes
wall bracket for single tub
These strong wipes are ideal for
cleaning knives, thermometers,
probes and other hygiene sensitive
equipment.
order code description
836-062
single tub of 150 Probe-Wipes
bucket of CaterWipes
SaniSafe wipes
CaterWipes are ideal for
cleaning serving counters,
machinery and other
hygiene sensitive areas.
Each wipe measures 200
x 200mm.
SaniSafe wipes are
contained in a new QRD
(quick release dispenser)
dispensing system,
designed to dispense wipes
with controlled release,
improved hygiene and
reduced waste.
The wipes are supplied in
airtight, easy to dispense,
buckets of 1,000 blue
anti-bacterial wipes.
order code description
836-100
bucket of 1,000 CaterWipes
836-150
refill for the above buckets
CATERING THERMOMETERS
anti-bacterial wipes
Each pack contains 1,000
blue anti-bacterial wipes
(200 x 200mm).
order code description
836-330
SaniSafe wipes - single pack
836-340
SaniSafe wipes - pack of three
39
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement