130628RB14N1ASD,RB17N1ASD User Manual

Add to my manuals
14 Pages

advertisement

130628RB14N1ASD,RB17N1ASD User Manual | Manualzz

2

Contents

Brief introduction……………………….2

Important safety instructions…………2

Installing your new appliance………...4

Description of the appliance………….6

Display controls……………………...6

Using your appliance…………………8

Helpful hints and tips……………… 10

Cleaning and care……………………11

Troubleshooting………………………12

Disposal of the appliance……………13

Brief introduction

Thank you for your choosing Hisense products. We are sure you will find your new appliance a pleasure to use.

Before you use the appliance, we recommend that you read through these instructions carefully, which provides details about its usage and functions. this appliance are familiar with its operations and safety features. It is important that you install the appliance correctly and pay attention to the safety instructions carefully.

user's manual with the appliance for future reference and retain it to any future users.

in household and similar applications such as:

-Staff kitchen- areas in shops, offices and other working environments;

-Farmhouses by clients in hotels, motels and other residential types of environment;

-Bed and breakfast type of environments.

operating correctly, please check the

Troubleshooting page for assistance. If still in doubt, please contactthe customer service help line for assistance.

Important safety instructions

General safety and daily use

It is important to use your appliance safely. We recommend that you follow the guidelines below.

Store any food in accordance with the storage instructions from the food manufacturer.

Don't use mechanical devices or any other means to speed up the defrosting process, unless they are approved by the manufacturer.

yourself. It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire or electric shock.

tubing of the refrigerant circuit.

Don't place too much food directly against the air outlet on the rear wall of both the refrigerator and freezer compartment, as it affects sufficient air circulation.

Hisense Refrigerator

3 components of this appliance.

Frozen food must not be refrozen once it has been thawed out.

(especially carbonated drinks) in the freezer compartment. Bottles and cans may explode.

cubes straight from the freezer as this can cause freezer burn to the mouth and lips.

To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers.

Safety for children and infirm persons

This appliance is not intended

for use by persons (including children) with reduced physical, sensory or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. children to avoid risk of suffocation.

by touching the very hot compressor at the rear bottom of appliance appliance as this could cause injury should they fall off.

appliance by hanging or standing over or on the doors, racks, shelves and drawers etc.

Safety about electricity

To avoid the risks that are

always present when using an electric appliance, we recommend that you pay more attention to the instructions about electricity below.

through the appliance. Should any damage be evident, don't plug in the appliance but contact the store immediately from which you purchased it. Keep all packing materials in this case.

hours before plugging in the appliance to allow the refrigerant to flow back into the compressor.

single phase alternating current of

115V/60Hz . If the voltage fluctuates exceeding the upper limit, A.C. automatic voltage regulator of more than 350W should be applied to the refrigerator for safety use.

when the appliance is installed.

-This appliance is fitted with a fused plug in accordance with local standard. The fused plug should be suitable for use in all houses fitted with sockets in accordance with current specifications.

-If the fitted plug is not suitable for your socket outlets, please contact a qualified registered electrician. multiple sockets which could cause overloading of wiring circuits and could cause a fire.

Always plug your appliance into its own individual electrical socket which has a voltage rating that matched the rating plate.

squashed or damaged. Otherwise, it may cause short circuit, electric shock or overheat and even cause a fire.

socket is loose, there is a risk of electric shock or fire.

Hisense Refrigerator

4 it from the mains power before you clean or move it.

Never unplug the appliance by pulling as ice cream makers inside the food storage compartments of the appliance, unless they are approved by the on the electrical cord. Always grip the to prevent damaging the power cord.

plug manufacturer.

firmly and pull straight out from the socket

Do not look direct into the LED light located in the refrigerator compartment

Do not operate the appliance without the light cover of interior lighting.

Any electrical component must be replaced or repaired by a qualified electrician or authorized service engineer.

without optical instruments to avoid eye injuries. If it is not functioning correctly, consult a qualified, registered electrician or replace it in accordance with the “Cleaning and Care” chapter.

Only genuine spares should be used.

Do not use electrical appliances such

Installing your new appliance

Before using the appliance for the first time, you should be informed of the following tips.

Ventilation of appliance

In order to improve efficiency

of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around the refrigerator.

It is advisable for there to be at least

75mm of space from the back to the wall, at least 100mm from its top,at last 100mm from its side to the wall and a clear space in front to allow the doors to open 145°,as shown in following diagrams.

75mm

100mm

1760mm

100mm

Hisense Refrigerator

1.LED light(inside)

2.Cabinet

3.Door switch

4.Glass shelf

5.Crisper cover

6.Fruit and vegetables crisper

(with divider)

7.Twist ice tray

8.Upper freezer drawer

9.Ice storage box(inside)

10.Middle freezer drawer

11.Middle freezer glass shelf

12.Lower freezer drawer

13.Sensor

14.Adjustable foot

15.Roller

16.Magnetic switch

17.Freezer door

18.Freezer door seal

19.Fridge door seal

20.Lower door rack

21.Middle door rack

22.Bottle holder

23.Small door rack

24.Egg tray(inside)

25.Fridge door

26.Covered dairy rack

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

View of the appliance

RB14N1ASD

RB17N1ASD

Note:

1.Due to unceasing modification of our products, your refrigerator may be slightly different from this Instruction Manual, but its functions and using methods remain the same.

2.Shelves and drawers are arranged for optimum energy efficiency on delivery.

26

25

24

23

22

21

20

19

18

17

16

6

Display controls

Use your appliance according to the following control regulations. Your appliance has the corresponding functions and modes as the control panels showed in the pictures below.

When the appliance is powered on for the first time, the backlighting of the icons on display panel starts working.

If no buttons have been pressed and the doors are closed, the backlighting will turn off.

Hisense Refrigerator

7

3. Super Cool

Display controls

F

F

F

F

Super Cool can refrigerate your food much faster, keeping food fresh for a longer period this function. The light will be illuminated.

after 6 hours and the refrigerator temperature setting displays 2°C/ 35°F .

Adjusting the temperature

We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to

4°C/ 39°F and the freezer to -18°C/ -1°F .

If you want to change the temperature, follow the instructions below.

Caution! When you set a temperature,

you set an average temperature for the whole refrigerator cabinet.

Temperatures inside each compartment may vary from the temperature values displayed on the panel, depending on how much food you store and where you place them.

Ambient temperature may also affect the actual temperature inside the appliance.

1. °C/°F exchange

The temperature

between

°C

and can

°F

exchange by press

Holiday

” & “

Alarm

” button

at the same time

for 3

seconds

.

2. Fridge

Press “Fridge” to set fridge temperature between 2°C/ 35°F and

8°C/ 46°F as needed, and control panel will display corresponding values according to the following sequence.

8°C

2°C

7°C

3°C

6°C

4°C

5°C

6°F 5°F

-12°F -11°F

4°F 3°F

-10°F

2°F 1°F 0°F -1°F

-9°F -8°F -7°F -6°F

-2°F -3°F

-5°F -4°F can switch it off by pressing “Super

Cool” or “Fridge” button and the refrigerator temperature setting will revert back to the previous setting.

4. Freezer

Press “Freezer” to set freezer temperature between -14 °C / 6°F and

-24°C / -12°F as needed, and the control panel will display corresponding value according to the following sequence.

-14°C

-15°C -16°C -17°C

-18°C -19°C

-24°C -23°C -22°C -21°C -20°C

6°F 5°F

-12°F -11°F

4°F 3°F

-10°F

2°F 1°F 0°F -1°F

-9°F -8°F -7°F -6°F

-2°F -3°F

-5°F -4°F

5. Super Freeze

Super Freeze can quickly lower frozen temperature and freeze your food faster than usual. This can lock the vitamins and nutrition of fresh food and keep your food fresh longer.

Press “Super Freeze” button to activate the super freeze function. The light will come on and the freezer temperature setting displays -24°C

/

-12°F .

In case of the maximum amount of food to be frozen, we recommend that you let the appliance operates for 6 hours first.

Super freeze automatically switches off after 26 hours .

When super freeze function is on you can switch off super freeze function by pressing

“Super Freeze” or “Freezer” button and the freezer temperature setting will revert back to the previous setting.

Hisense Refrigerator

8

6. Holiday

If you are going to be away for a long period of time such as a long holiday or business trip, you can activate this function by pressing

“Holiday” button for 3 seconds until the light is illuminated.

When the holiday function is activated, the temperature of the fridge is automatically switched to 15°C

/

59°F . The fridge temperature setting displays “-” and the freezer compartment remains on.

Important! Do not store any food in the fridge during this time.

When the holiday function is on, you can switch off it by pressing any button of

“Holiday”, “Fridge” and “Super Cool” button.

The fridge temperature will revert back to it's previous setting.

7.Alarm

In case of alarm, “Alarm” icon will be on and there will be buzzing sound. Press “Alarm” button to clear alarm and then “Alarm” icon will turn off and stop buzzing.

Door Alarm

When door of fridge or freezer is open for over 2 minutes, door alarm will come on. In case of door alarm, buzzer will sound 3 times per minute and stop 10 minutes later.

To save energy, please avoid keeping doors open for a long time when using refrigerator. In case of door alarm, you can also clear door alarm by closing the doors.

Temperature alarm

If freezer temperature is too high due to power failure or other reasons, temperature alarm is activated and the freezer temperature setting displays “--” .

In case of temperature alarm, buzzer will sound constantly for 10 times.

In case of temperature alarm, press

“Alarm” button for 3 seconds to check the highest freezer temperature. The temperature value and “Alarm” icon will simultaneously flash for 5 seconds.

Caution! When refrigerator is powered on again, it is normal that temperature alarm is activated and you can press “Alarm” clear it.

Using your appliance

" showed in general. With this part instruction you can have the right way to use them.

Door rack

It is suitable for the storage of eggs, canned liquid, bottled drinks and packed food, etc. Do not place too many heavy things in the racks

The middle door shelf can be placed at different heights according to your requirements. Please take food out of the shelf before lifting vertically to reposition. lower door rack and slide to left or right as your prefer.

Bottle holder operation

The bottle holder can be used to hold the bottle. You can place it on the middle or

Note: There are egg trays in the upper

shelf and bottle holder in the lower shelf.

Shelf in refrigerator chamber

There are shelves in refrigerator chamber, and they can be taken out to be cleaned.

Hisense Refrigerator

9

Crisper and Humidity control

The crisper, mounted on telescopic extension slides, is for storing vegetables and fruits. You can adjust the humidity inside by using the sliding block.

The sliding block on crisper cover can slide to left or right and the air hole become bigger or smaller relatively. Bigger air hole opening means less humidity and smaller means more humidity.

We recommend that you store vegetables with more humidity and fruit less humidity.

Crisper cover

Humidity control

Installation bracket

The installation bracket is located under the top of the freezer chamber. In order to get more space in the freezer, you can remove the installation bracket.

When removing the bracket, you can pull out the twistable ice tray and the upper freezer drawer, lift both the two catches on the left and right underside, and pull it forward until the bracket break from the three circular attachments. Then you should bend it at one side, slip it from the guide and finish removing the bracket.

Catch

Divider

Crisper

When you remove the crisper, pull them forward, then lift the crisper off the slides.

Remember to empty food in the crisper firstly. Once you have removed the drawers, ensure the slides are pushed back fully.

Divider easily manage crisper space as you store separate food.

3. Using your freezer chamber

The freezer chamber is suitable for storage of foods required to be frozen, such as meat, ice cream and others.

Caution! Never close the freezer door while the drawers, installation bracket, ice tray, and/or telescopic slides are extended. It may damage both the parts and the refrigerator.

Ensure that drink bottles are not left in the freezer as freezing liquid may cause the bottle to explode.

Twistable ice tray

The twistable ice tray is used to make and deposit ice cubes. You should use it as follows.

1.Pull out the twistable ice tray from the installation bracket.

2.Fill the drinking water inside (do not fill above the max water level).

3.Place the filled ice tray back to the bracket.

4.Wait for about 3 hours and twist the knobs clockwise and the ice will drop into the ice box below.

Installation bracket

Ice box

Twist ice tray

Middle freezer drawer

Drawers

The drawers, mounted on telescopic extension slides, can be used to store rather more food. But the upper drawer is only for small food items.

The method for removing the drawers is the same as the crisper in the refrigerator chamber.

Hisense Refrigerator

10

Helpful hints and tips

Energy saving tips

We recommend that you follow the tips below to save energy.

film wrap.

for long periods in order to conserve energy.

stored in the door racks.

Hints for freezing

When first starting-up or after a period out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment.

any sources of heat (direct sunlight, electric oven or cooker etc) necessary.

liquid in the appliance.

enable it to be rapidly and completely frozen and thawed.

Wrap up the food in aluminum foil or polyethylene food wraps which are airtight.

ventilated, humidity free room. Please refer to Installing your new appliance chapter.

touch the food which is already frozen to avoid temperature rise of the latter.

combination for the drawers, crisper immediately after removal from the and shelves, do not adjust the freezer compartment, will probably combination as this is designed to be cause frost burns to the skin.

the most energy efficient configuration.

Hints for fresh food refrigeration

each frozen package in order to keep track of the storage time.

refrigerator or freezer. The internal temperature will increase resulting in the compressor having to work harder

Hints for the storage of frozen food

and consuming more energy.

stored correctly by the food retailer.

particularly if it has a strong flavor.

Place food properly so that air can circulate freely around it.

Hints for refrigeration

food should be wrappde and place on the glass shelf.

above the vegetable drawer. Always follow food storage times and use by dates suggested by food manufacturers.

covered and may be placed on any shelf. in the vegetable crisper.

rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.

Switching off your appliance

If the appliance needs to be switched off for an extended period, the following steps should be taken prevent mould on the appliance.

1. Remove all food.

2. Remove the power plug from the mains socket.

3. Clean and dry the interior thoroughly.

4. Ensure that all the doors are wedged open slightly to allow air to circulate.

in airtight foil or plastic film wrap.

Hisense Refrigerator

11

Cleaning and care

For hygienic reasons the appliance

(including exterior and interior accessories) should be cleaned regularly at least every two months.

Caution! The appliance must not be

connected to the mains during cleaning to avoid potential electrical shock. Before cleaning, please switch off the appliance off and remove the plug from the mains socket.

Exterior cleaning

To maintain good appearance of your appliance,you should clean it regularly.

-Wipe the digital panel and display panel with a clean, soft cloth.

-Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance. This helps ensure an even distribution of moisture to the surface.

-Clean the doors, handles and cabinet surfaces with a mild detergent and then wipe dry with a soft cloth.

Caution!

-Don't use sharp objects as they are likely to scratch the surface.

-Don't use Thinner, Car detergent,

Clorox, ethereal oil, abrasive cleansers or organic solvent such as Benzene for cleaning. They may damage the surface of the appliance and may cause fire.

Interior cleaning

You should clean the appliance interior regularly. It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda, and then rinse with warm water using a wrung-out sponge or cloth. Wipe completely dry before putting the shelves and baskets back.

Thoroughly dry all surfaces and removable parts.

Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment's interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when the supply of food stocks are low and proceed as follows:

1.Remove existing food and accessories baskets, unplug the appliance from the mains power and leave the doors open. Ventilate the room thoroughly to accelerate the thawing process.

2. When defrosting is completed, clean your freezer as described above.

Caution! Don't use sharp objects to

remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket.

Door seals cleaning

Take care to keep door seals clean.

Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.

Caution! Only after the door seals are

completely dry should the appliance be powered on.

Replacing the LED light:

Warning! The LED light must not be

replaced by the user! If the LED light is damaged, contact the customer helpline for assistance. To replace the

LED light, the below steps can be followed:

1. Unplug your appliance.

2. Remove light cover by pushing up and out.

3. Hold the LED cover with one hand and pull it with the other hand while pressing the connector latch.

4. Replace LED light and snap it correctly in place.

Hisense Refrigerator

12

Troubleshooting

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below.

Warning! Don't try to repair the appliance yourself. If the problem persists after you

have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product.

Problem

Appliance is not working correctly

Odours from the compartments

Noise from the appliance

Possible cause & Solution

Check whether the power cord is plugged into the power outlet properly.

Check the fuse or circuit of your power supply.Replace if necessary.

The ambient temperature is too low. Try setting the chamber temperature to a colder level to solve this problem.

It is normal that the freezer is not operating during the automatic defrost cycle, or for a short time after the appliance is switched on to protect the compressor.

The interior may need to be cleaned

Some food, containers or wrapping cause odours.

The sounds below are quite normal:

Compressor running noises.

Air movement noise from the small fan motor in the freezer compartment or other compartments.

Gurgling sound similar to water boiling.

Popping noise during automatic defrosting.

Clicking noise before the compressor starts.

Other unusual noises are due to the reasons below and may need you to check and take action:

The cabinet is not level.

The back of appliance touches the wall.

Bottles or containers fallen or rolling.

It is normal to frequently hear the sound of the motor, it will need to run more when in following circumstances:

The motor runs continuously

A layer of frost occurs in the compartment

● Large quantity of warm food has recently been stored in the appliance.

The temperature outside the appliance is too high.

Doors are kept open too long or too often.

After your installing the appliance or it has been switched off for a long time.

Check that the air outlets are not blocked by food and ensure food is placed within the appliance to allow sufficient ventilation.Ensure that door is fully closed.To remove the frosst,plerse refer to cleaning and care chapter.

Hisense Refrigerator

13

Temperature inside is too warm

Temperature inside is too cold

Doors cant be closed easily

Water drips on the floor

The light is not working

You may have left the doors open too long or too frequently; or the doors are kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back and top

Increase the temperature by following the "Display controls” chapter.

Check whether the top of the refrigerator is tilted back by

10-15mm to allow the doors to self close,or if something inside. is preventing the doors from closing.

The water pan (located at the rear bottom of the cabinet) may not be properly leveled, or the draining spout (located underneath the top of the compressor depot) may not be properly positioned to direct water into this pan, or the water spout is blocked. You may need to pull the refrigerator away from the wall to check the pan and spout.

The LED light may be damaged. Refer to replace LED lights in cleaning and care chapter.

The control system has disabled the lights due to the door being kept open too long, close and reopens the door to reactivate the lights.

Disposal of

the appliance

It is prohibited to dispose of this appliance as household waste.

Packaging materials

Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it.

Before disposal of the appliance

1. Pull out the mains plug from the mains socket.

2. Cut off the power cord and discard with the mains plug

Warning! Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition.

Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.

Correct Disposal of this product

This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead,it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service, or the shop where you purchased the product.

Hisense Refrigerator

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement