INTERNAL DDS USER MANUAL

INTERNAL DDS USER MANUAL
DDS – Basic User Manual
v 1.1 (May 2013)
DDS
USER GUIDE
This is a guide for the basics of DDS, setting up users etc..
For more details on each submission section
Please refer http://www.aer.ca/
search for the users guides available.
ALBERTA ENERGY REGULATORS
1
DDS – Basic User Manual
v 1.1 (May 2013)
ALBERTA ENERGY REGULATOR
PUBLISHED BY
ALBERTA ENERGY REGULATOR
1000, 250-5 Street SW
Calgary, Alberta
T2P 0R4
Telephone (403) 297-8311
Email – [email protected]
Web site: http://www.aer.ca/
ALBERTA ENERGY REGULATORS
2
DDS – Basic User Manual
v 1.1 (May 2013)
TABLE OF CONTENTS
SECTION 1 - DDS INTRODUCTION
Pg 4
1.1 SIGNING ON THE DDS WEBSITE
Pg 4
1.2 DDS CONTACT LIST
Pg 5
SECTION 2 DDS ADMINISTRATOR OPTIONS
Pg 8
2.1 NEW USER
Pg 8
3.1
1.1
Adding New user
Pg 8
1.2
Adding A CMSA
Pg 9
1.3
Deleting / Deactivating users
Pg 9
RESETTING PASS WORDS
1.1 Changing a pass word
4.1 ROLES
1.1 MEANING of Roles
Pg 11
Pg 11
Pg 12
Pg 13
5.1 DELEGATES
Pg 16
SECTION 3 GLOSSARY
Pg 19
3.1 PERMISSION LETTERS SAMPLES
Pg 20
3.2 BA CODE STATUS
Pg 22
3.3 EPAP
Pg 23
3.4 DIRECTIVES LINK
Pg 24
3.5 GENERAL NOTES
Pg 26
ALBERTA ENERGY REGULATORS
3
DDS – Basic User Manual
v 1.1 (May 2013)
SECTION 1 - DDS INTRODUCTION
1.1 - SIGNING ON TO DDS WEBSITE
Front page before login contains news items – i.e. updates, shut downs etc. should read
to see if it pertains to calls that may come in for the day.
There are 2 ways to get the AER website http://www.aer.ca to the DDS system
• top of screen click on Systems & Tools –
• or scroll down to see Systems & Tools – click on portal
•
Click on Digital Data Submission (DDS)
ALBERTA ENERGY REGULATORS
4
DDS – Basic User Manual
v 1.1 (May 2013)
1.2 - DDS CONTACT LIST
AER DDS DEPARTMENT CONTACT LIST
AER - also see on DDS Website under AER - Applications - Submit Applications for a fuller Dir, types
& dept. contacts
ISSUE/NOTE
DEPARTMENT
DDS ADMINISTRATOR helpline
General dds
inquiries
CUSTOMER CONTACT
CENTRE
To order data or
information
publications
INFORMATION SERVICES
INQUIRIES
UWI submissions
WELL DATA SERVICES
HELP LINE
-WDS
DIRECTIVE 59
PHONE #
403-2978952 option 1
403-2978311 option 0
403-2978311 option 2
403-2978952 option 2
403-2978952 option 2
[email protected]
[email protected]
[email protected]
[email protected]r.ca
DIRECTIONAL SURVEYS
403-2978952 option 5
[email protected]
CORE RESEARCH CENTRE
403297-6400
[email protected]
WELL LOGS
Change to
company name,
address, or contacts
- well name change,
transfer etc. - also
mineral leases - Lic
transfers of wells,
facilities, pipelines &
batteries - working
interests see note at
bottom - For
partnership changes
or changes to
working interest
participation - in
LLRs - if one
company is looking
for another company
they go through Info
services
EMAIL
LIABILITY MANAGEMENT
(Corporate Compliance)
Helpline
ALBERTA ENERGY REGULATORS
[email protected]
403-2973113
[email protected]
5
DDS – Basic User Manual
Spud reports now called Rig
activities /
enforcement
inspections/ lic.
reports/notification
s - drilling & tour
reports/ release
incidents/
construction
notifications/ liner
installation/
pipeline testing venting
Well lic.
Amendments/
multiple page
downloads - gas
removals/ oil
effluent/ well lic
apps/ well loc.
Approval to drill/
to register a well
before drilling/
waste storage;
ground elevation
issues
v 1.1 (May 2013)
FIS (FIELD INSPECTION
SURVEILLANCE)
403 - 2974845
option 2
[email protected]
FACILITY APPLICATIONS
(DIRECTIVE 56)
403-2972228
[email protected]
EAS/FACILITIES HELP LINE (Electronic Application
Submission)
403-2972228
[email protected]
WELL OPERATIONS
403-2975290
[email protected]
WELL TEST HELP LINE
403- 297355-5742
[email protected]
CORE RESEARCH CENTRE
403-2976400
[email protected]
Application for
down spacing spacing issues &
reservoir
development
applications - Gas
Removal
Applications commingling water disposal, no
enhanced
recovery, waste
disposal
RESOURCES
APPLICATIONS
(Directive 65)
403-4764967
[email protected]
GRD - Gas
Removal Data
GRD
Well lic./ well
suspensions/
inactive - non
routine well
abandonment pressure survey
Well testing
compliance
Directive 40
ALBERTA ENERGY REGULATORS
[email protected]
6
DDS – Basic User Manual
PA (Production Accounting)
v 1.1 (May 2013)
403 - 2978952
[email protected]
option 3
EPAP SUPPORT
403 - 2978311
option 0
[email protected]
Emergency
Response Plan
requirements,
land use planning
(municipal
setbacks), D-71,
ERCBH2S,
-table top
exercises
EMERGENCY RESPONSE EPA -ERP
403-2972625
[email protected]
Sulphur balance
report
S-30 DDS SUPPORT DESK
403-2978468
[email protected]
ENERGY STATISTICS
[email protected]
EXTERNAL CONTACTS
Utility Questions
Tariff issues
AUC
780-6431055
[email protected]
AUC System Services
780-6431055
[email protected]
AUC
403-5924410
PETRINEX INQUIRIES
403-2976111(Calgary)
1-800-9921144 (other
http://www.petrinex.ca
locations)
BA CODES
ALBERTA ENERGY REGULATORS
1(780) 4221395
7
DDS – Basic User Manual
v 1.1 (May 2013)
SECTION 2 - DDS ADMINISTRATOR OPTIONS
After logging in select – DDS Administration Options from left hand column
DDS ADMINISTRATOR
•
is a CMSA (company master security administrator) of the DDS Accounts in
the company.
•
RESPONSIBILITIES of a COMPANY DDS CMSA
Setting up new users for the company’s DDS account
Assigning roles to each of the users which they will require to do their DDS
submissions
•
Maintaining the activities of the users
™ De-activating a user’s account if they leave the company.
™ reactivating user’s accounts
™ resetting pass words
™ adding other CMSAs with in the company
•
Adding and maintaining delegate’s
™ setting up access or an account
™ monitoring the access
™ assisting in DDS problems that may occur
ALBERTA ENERGY REGULATORS
8
DDS – Basic User Manual
v 1.1 (May 2013)
2.1 – NEW USERS
1.1 - ADDING A NEW USER
•
New accounts or account changes – Company CMSAs are able to set up new
users.
•
First time user in company a permission letter 1 is required before setting up
new user accounts or changing company administrators.
1
•
Section 3 Glossary - 3.1i for permission letters
Change of CMSA permission letter to send is 1 change the CMSA.
1
Section 3 Glossary - 3.1ii for permission letters
•
left hand column click add user
•
Fill information
•
if an error message comes up with user id already in use – chose a different
user id
•
Click save.
Please Note: important step
Once adding a new user is completed - ROLES must be chosen for the applications they
will be using or the user will not be able to submit – See Section C - ROLES
ALBERTA ENERGY REGULATORS
9
DDS – Basic User Manual
v 1.1 (May 2013)
1.2 - ADDING A COMPANY CMSA
•
When a user is set up by the AER DDS CMSA the user automatically receives
the company CMSA status and roles.
•
When a company CMSA leaves and does not re-appoint a new company
CMSA. The permission letter to change of company administrator should be
sent out for those requesting a new CMSA.
Section 3 Glossary - 3.1 - ii
1.3 - DELETING/DEACTIVATING USERS
•
REMOVING/DELETING – the DDS system does not have the capability of
removing or deleting users. This is a function for the company DDS CMSA.
If a user has left the company - 1> de-active the user’s account 2> - change the
user’s id to indicate that they have left etc. (deactivate – left – not here etc.) 3>
click active box off.
•
DEACTIVATING Every 3-6 months a program runs to check on the account
activities of the clients, those users who have not used their account after that
time period are “deactivated”. To prevent the deactivation, please log in every 3
months or so
•
REACTIVATING accounts – go to user’s profile – click on active box – save – the
user can use the old user id and pass word.
ALBERTA ENERGY REGULATORS
10
DDS – Basic User Manual
v 1.1 (May 2013)
2.2 - RESETING PASSWORDS
Resetting a users pass word
•
Reason - too many incorrect attempts – (3) or forgot in-active user – if an
account is not used for more then 3 months the system
•
Automatically deactivates the account. To avoid this log on & off at least every
3 months.
•
The company CMSA can reset the pass word or reactivate the user’s
account
Resetting a CMSA’s pass word
•
the AER DDS CMSA is the only one who can reset the company CMSA’s pass
word
1.1 - CHANGING PASS WORDS
•
to change a pass word for one’s own account - sign in with current pass word
– in left hand column – click on – DDS Administrator – user options – my profile
- on top bar click on change pass word
ALBERTA ENERGY REGULATORS
11
DDS – Basic User Manual
v 1.1 (May 2013)
2.3 - ROLES
•
4 pages of Roles will show – a CMSA will receive all the roles. For other
users the roles which pertain to what they require will be assigned by the
CMSA.
•
•
Please Note the AER DDS Administrator can not add roles to company
accounts only the company CMSA can do this.
Below is the list of roles which will appear on the 4 pages
Amend Frac Fluids
EPAP Editor
EPAP Viewer
Submit Costs To Close A
WM Facility
Maintain Emergency
Response Plan
Register Emergency
Response Plan
Submit Facility Licence
Abandonment Report
Submit Facility Licence Link
Notification
Submit Surveillance
Notification
Submit Monthly Gas
Removal Data
Update Approved Spacing
Update Applied For
Spacing
Submit/Update Surface
Casing VF/GM Incident
Submit/Update Casing
Failure Incident
Submit Well Test
Submit Well Name Change
Notification
Submit Well Licence
Suspension
Submit Well Licence
Abandonment Report
Submit Non-Routine Well
Licence Abandonment
Submit Non Registry
Throughput
Submit Multi-Licence Pad
Notification
Submit Monthly Sulphur
Balance Reporting
Submit Monthly Gas
Removal Data
Submit Licence Transfer
Application
Submit Licence Liability
Submit Fracturing Fluids
Submit Facility Licence Link
Notification
Submit Facility Licence
Abandonment Report
Submit
Facilities/Resources/Utilities
Application
Submit Costs To Close A
WM Facility
Submit Annual Well Packer
Test Results
Submit Annual Waste
Report
Register Emergency
Response Plan
Participate in a Proceeding
Maintain Emergency
Response Plan
Submit Well Drilling and
Completion Data
Submit Surveillance
Notification
ALBERTA ENERGY REGULATORS
12
DDS – Basic User Manual
•
v 1.1 (May 2013)
Colour coding on the chart refers to the departments
MEANINGS OF AER DDS ROLES
NAME
EPAP
EPAP Viewer
EPAP Editor
MEANING/FUNCTION
Enhanced Production
Audit Program Operator's compliance
with ERCB measurement
& reporting requirements
- EPAP department will
have to be contacted
EPAP Users that can
view only
EPAP Users that can
view data add & edit
data.
CONTACT
DEPARTMENT
PHONE
EMAIL
403-8311
option 0
[email protected]
Production Audit
403-8311
option 0
[email protected]
Production Audit
403-8311
option 0
[email protected]
Production Audit
Submit costs to close a WM
Facility
Waste Management
403-4764967
[email protected]
resources
Application
Maintain Emergency
Response Plan
ERP Users that can
maintain current ERPs
that have already been
registered.
403-2972625
[email protected]
EPA
Register Emergency
Response Plan
ERP Users that can
register new ERPs only.
403-2972625
[email protected]
EPA
403-2973113
[email protected]
Liability
Management
Directive 006
403-2973113
[email protected]
Liability
Management
FIS is used to capture:
- Notifications for
submitting spuds,
pipeline
construction/tests and
flaring/venting
notifications.
- Incidents for viewing
release incident records
- Inspection for viewing
and submitting follow ups
on inspection records.
403- 2974845
options 2
[email protected]
FIS
FIS User can submit
notifications only.
403-2974845
options 2
[email protected]
FIS
[email protected]
Resources
Applications,
Directive 65; MIRA
Submit Facility Licence
Abandonment Report
Submit Facility Licence Link
Notification
Not a role only a notation -
Field Inspection
System (FIS)
Submit Surveillance
Notification
Submit Monthly Gas
Removal Data
Submit
Facilities/Resources/Utilities
Application
To do any Facilities or
Resources functions this
one is required
Res. # 403476-4967
Facilities #
403-2972228
Resources email [email protected]
Facilities email –
[email protected]
Resources,
Facilities & Utilities
Applications
Submit Licence Liability
Site Specific Liability only
403-2973113
[email protected]
Corporate
Compliance/Liability
Management
ALBERTA ENERGY REGULATORS
13
DDS – Basic User Manual
v 1.1 (May 2013)
Submit Licence Transfer
Application
Dir. 006
403-2973113
[email protected]
Liability
Management
Submit Non Registry
Throughput
Dir. 75 (Oilfield Waste
Liability - OWL)
403-2973113
[email protected]
Liability
Management
Participate in a Proceeding
allows put on documents
of the hearing is run
through DDS
403-4764783
Jennifer [email protected]
Liability
Management
Submit Monthly Sulphur
Balance Reporting
Directive 17, section 11.6
- allows companies to
submit Sulphur Balance
(S30) reports
403-2978468
[email protected]
S30
403-4764967
[email protected]
Resources
403-2973113
[email protected]
Corporate
Compliance/Liability
Management
Submit Well Drilling and
Completion Data
403-2978952 option
2
[email protected]
WDS
Submit Fracturing Fluids
403-2978952 option
2
[email protected]
WDS
Submit Well Test
403-3555742
[email protected]
ICD - Well Test
403-4764967
[email protected]
Resources
Applications,
Directive 65
Update Approved Spacing
403-4764967
[email protected]
Resources
Applications,
Directive 65
Submit/Update Casing
Failure Incident
403-2975290
[email protected]
Well Operations
Submit Annual Waste
Report
Submit Well Name Change
Notification
Update Applied For Spacing
Dir. 006
well bottomhole well
spacing - subsurface
Resources Applications
matter rather than to do
with surface well site
location
View/Follow-Up Surveillance
Inspections
FIS User can view
inspections records and
submit follow ups to open
inspection records that
require follow up.
403-2974845
options 2
[email protected]
FIS
Update/Delete Field
Surveillance Notification
FIS User can view,
update or delete existing
notifications.
403-2974845
options 2
[email protected]
FIS
Submit Multi-Pad
Notification
Dir. 006
403-2973113
[email protected]
Liability
Management
Submit Well Licence
Suspension
As per the requirements
of Directive 013
403-2975290
[email protected]
Well Operations
403-4764967
[email protected]
Resources
Applications,
Directive 65
Update Registered Spacing
ALBERTA ENERGY REGULATORS
14
DDS – Basic User Manual
v 1.1 (May 2013)
Submit/Update Surface
Casing VF/GM Incident
403-2975290
[email protected]
Well Operations
Submit Annual Well Packer
Test Results
403-2975290
[email protected]
Well Operations
403-2975290
[email protected]
Well Operations
403-3555742
[email protected]
ICD - Well Test
Submit Well Licence
Abandonment Report
Well Licence Surface AB
Directive 020 Non-routine
Well Dir 020 = Well Ops.
Facility Lic = Liability
Management
Validate Well Test
View Surveillance
Enforcement Report Card
FIS User can view the
Licensee Compliance
Report Card in inspection
reports.
403- 2974845
options 2
[email protected]
FIS
View Surveillance
Enforcement
FIS User can view the
Provincial Enforcement
Report in inspection
reports.
403- 2974845
options 2
[email protected]
FIS
[email protected]
Resources
Applications,
Directive 65; MIRA
View Release Incidents
(Licensee)
View Surveillance
Notification
403-2974845
options 2
[email protected]
FIS
View/Download Inactive
Well Licence List
403 - 2975290
[email protected]
Well Operations
403- 2973113
[email protected]
Liability
Management
View Liability Rating
Dir. 006
EPAP – Enhanced Production Audit Program - Operators' compliance with the AER
measurement and reporting requirements - Roles – EPAP Editor, Viewer & Admin –
Admin is only for the person who is controlling the people who will do the submissions.
See Section 3 – Glossary – 3.3 – EPAP
EPA – Emergency Response
ALBERTA ENERGY REGULATORS
15
DDS – Basic User Manual
v 1.1 (May 2013)
2.4 - DELEGATES
(Please note as of July 11/11 – Submit Facilities/Resources/Utilities Application – role is no
longer available to delegates. Other Resources applications are not available as well)
Please note that the delegate has to have a BA Code and should have the same roles
in their account as what the client will select them for.
The client usually shows up in the Delegates Master Security Administrator’s account
Delegates can no longer submit resources applications for their clients. The client will
have to add the delegate as a user with the roles that are appropriate.
•
from left hand side bar click on Maintain and Assign Delegates
•
click on add new delegate button
ALBERTA ENERGY REGULATORS
16
DDS – Basic User Manual
v 1.1 (May 2013)
•
Add a New Delegate - Type in either their BA Code or their company name.
•
click on the blue BA Code that will appear under BA Code (click to select)
ALBERTA ENERGY REGULATORS
17
DDS – Basic User Manual
•
v 1.1 (May 2013)
The roles are selected by clicking on the squares then clicking save. There are
3 pages of roles
•
The next step is to put in an expiry date (reflective of length of time the delegate will
be doing the submissions) on the first line, fill in the contact name & the contact
email address.
ALBERTA ENERGY REGULATORS
18
DDS – Basic User Manual
v 1.1 (May 2013)
SECTION 3 DDS GLOSSARY
3.1 Permission Letters Samples
3.2 BA Code Status
3.3 General Notes
3.4 Acronym Reference
ALBERTA ENERGY REGULATORS
19
DDS – Basic User Manual
v 1.1 (May 2013)
3.1 - SAMPLES of DDS ACCOUNT REQUESTS GUIDELINES
i General Request Letter
- if you have a BA Code add it to point 7 and ignore the Petrinex notation.
To obtain a DDS account, please follow the succeeding guidelines below:
1. Letter on a company letterhead
2. Requesting a DDS Login ID and Password
3. Name of person
4. Phone Number
5. Fax Number
6. Email Address
7. Include AER Business Associate Code (BA Code)
* Please visit the following link if a BA Code is required to be obtained:
http://www.petrinex.ca/62.asp
8. Letter to be signed by someone of signing authority i.e. : Manager, or President
9. Fax it to (403) 297-7303 Attn: Production & Well Data Services or you may email a
scanned copy to [email protected]
Your account will be set up when the letter is received. An email will be sent to the listed
Client’s email address containing a User ID, the Password will be sent in a separate
email which is generated by the system and is confidential. It is recommended that the
Client print off the Digital Data System User Guide on the front page of the DDS website
and in the DDS Help. This outlines some of the different functions of the DDS system.
Any questions you may contact the DDS Administrator at 403-297-5802 or email
[email protected]
ALBERTA ENERGY REGULATORS
20
DDS – Basic User Manual
v 1.1 (May 2013)
Ii Letter to change Company CMSA
1. Letter on a company letterhead
2. Requesting a DDS Login ID and Password – or to change the currently listed
Administrator
3. Name of person to become Company Administrator
4. Phone Number of Company Administrator
5. Fax Number of Company Administrator
6. Email Address of Company Administrator
7. Include AER Business Associate Code (BA Code)
8. Letter to be signed by someone of signing authority
Ex: Manager, or President
9. Fax it to (403) 297-7303 Attn: Production & Well Data Services or you may email a
scanned copy to [email protected]
* Your account will be set up when the letter is received. An email will be sent to the
listed Company Administrator's email address containing a User ID, the Password will be
sent in a separate email which is generated by the system and is confidential. It is
recommended that the Company Administrator print off the Digital Data System User
Guide on the front page of the DDS website and in the DDS Help. This outlines some of
the different functions of the DDS system. Any questions you may contact the DDS
Administrator at 403-297-5802 or email [email protected]
ALBERTA ENERGY REGULATORS
21
DDS – Basic User Manual
v 1.1 (May 2013)
3.2 - BA CODE STATUS (BUSINESS ASSOCIATE CODE)
AMALGANATIONS
•
Companies who have amalgamated BA Codes no longer exist therefore can not access
the old accounts nor can they be reactivated or pass words reset.
•
To access data for transfer please contact Liability Management – [email protected]
or 403-297-3113
STRUCK
•
'Struck' refers to a company's status on the Alberta Corporate Registry
system. Companies are most commonly 'struck' from the Corporate Registry for failure to
file annual returns (essentially its taxes). If a company is struck from the Corporate
Registry it means that it has ceased to exist (from a legal perspective) in Alberta.
•
Please be advice no access to DDS accounts. Please contact- Corporate Registry in
Edmonton - Their website is - http://www.servicealberta.ca/Corporate_Registry.cfm
START
•
This is basically step one to the process of being struck. The company has missed some
filings but is still Active and users can still be added.
CANCELLED
•
BA Code was cancelled for some reason by Petrinex – please contact Petrinex - 780427-7899
CON OUT
•
Office is out of province – a “non-active” status is assigned to an Alberta legal entity once
it has continued to a non-jurisdiction (province etc.) and is no longer an Alberta legal
entity. The BA Status will have to be re-registered with Petrinex to get the Con-Out status
removed.
ALBERTA ENERGY REGULATORS
22
DDS – Basic User Manual
v 1.1 (May 2013)
3.3 EPAP - Steps to Assigning Authorized Contacts
Complied by AER EPAP
Background Information
In order to access the EPAP System, users must first access the AER’s Digital Data Submissions System
(DDS System). The DDS System acts as a doorway in to the EPAP System. That is why Users require
both:
• A DDS Log in and pass word,
• An assigned EPAP Rile to have authorized access to the EPAP System.
The EPAP Role will give the user Authorized Contact permissions in the EPAP System. Please read below
for complete instructions on how to obtain a DDS log in and pass word and also be given an EPAP Role in
the EPAP System.
STEP ONE: To obtain a log in and pass word for the AER Digital Data Submission (DDS) System.
If a staff member doesn’t already have a DDS log in and pass word, then your company will need to
follow the steps below to provide a letter to the AER Digital Data Submission Administrator.
To obtain a DDS account, please follow the succeeding guidelines below:
1. Letter on a company letterhead
2. Requesting a DDS Login ID and Password
3. Name of person
4. Phone Number
5. Fax Number
6. Email Address
7. Include AER Business Associate Code (BA Code)
* Please visit the following link if a BA Code is required to be obtained:
http://www.petrinex.ca/62.asp
8. Letter to be signed by someone of signing authority
Ex: Manager, or President
9. Fax it to (403) 297-7303 Attn: Production & Well Data Services or you may email a scanned copy to
[email protected]
* Your account will be set up when the letter is received. An email will be sent to the listed Client’s email
address containing a User ID, the Password will be sent in a separate email which is generated by the
system and is confidential. It is recommended that the Client print off the Digital Data System User
Guide on the front page of the DDS website and in the DDS Help. This outlines some of the different
functions of the DDS system. Any questions you may contact the DDS Administrator at 403-297-8952 ext.
1 or email [email protected]
*The staff member’s account will be set up when the letter received. An email will be sent to the listed
Client’s email address containing a User ID, the Pass word will be sent in a separate email which is
generated by the system and is confidential. It is recommended that the Client print off the Digital Data
System User Guide on the front page of the DDS website and in the DDS Help. This outlines some of the
different functions of the DDS system. Any questions you may contact the DDS Administrator at 403-2978952 ext 1 or email [email protected]
STEP TWO: Once the staff member has a DDS log on and pass word, then the next step is to designate
them as an EPAP Authorized Contact.
Your Company’s Master Security Administrator (CMSA) has to login in to the DDS (using their own
DDS login and pass word) and assign any new Authorized Contacts an “EPAP Role”.
Please refer to Digital Data System User Guide on the front page of the DDS website. This outlines some
of the different functions of the DDS system, including setting up “User Roles” (see page 12 C> ROLES of
ALBERTA ENERGY REGULATORS
23
DDS – Basic User Manual
v 1.1 (May 2013)
the DDS User Guide). Any questions please contact the DDS Administrator at 403-297-8952 ext 1 or email
[email protected]
Since the EPAP System access is via DDS, the CMSA must authorize new Users as a DDS user with an
“EPAP Role” of either EPAP Editor or EPAP Viewer.
EPAP Editor: this role permits both viewer and editor (read and write) access to the EPAP System
EPAP Viewer: this role permits only viewing (read) access to the EPAP System.
Please note that only CMSAs should have both EPAP Editor and EPAP Viewer assigned to them. Having
both of these roles allows the CMSA to assign roles (Editor or Viewer) to other staff within your company.
Once a User is assigned an “EPAP Role”, they will become Authorized Contacts for your company and be
given immediate access permissions to the EPAP System.
Viewing Your Company’s EPAP Authorized Contacts in the EPAP System
To see all EPAP Authorized Users and their roles, go to the Findings tab in the top tool bar in the EPAP
System, select Open All in the drop down. All Authorized Contacts will be listed on the General Tab.
3.4 AER Directives links
http://www.aer.ca/ - bar at top of page Regulations & Directives – mouse over to see
drop down click on directives – list appears click on the directive in blue.
ALBERTA ENERGY REGULATORS
24
DDS – Basic User Manual
v 1.1 (May 2013)
3.5 GENERAL NOTES
NOTES
For partnership
changes or changes to
working interest
Partnership changes or changes to Working Interest
Participant (WIP) information may only be made at the
time of a transfer otherwise the only way to update the
information is to submit the new information and have it
participation (WIP)
attached to the well/facility file.
Can be done through Petrinex - online and live or DDS.
Well Status change
Liability
Management
This depends on what the status of the well is currently
and what it is going to be.
PA - Production
Accounting
ABD (& Fish) -Abandonments, Fish-in-hole (ghosthole),Enforcement Abandonment’s, Abandonment
Coordinator; Blow-Outs & BOP- Blow-outs Incidents,
BOP inquiries, BOP Class 1 Requests; Casing Casing Design, Surface Casing; Caverns - Disposal,
Mining & Storage; Cementing -Problems - Drilling,
Problems - Abandonments; Compliance - D019 &
ST99 Compliance & Enforcement Coordinator; Critical
Well Operations
Sour Wells -Declassifications, Drilling,
Completions/Walkovers; Failures & Repairs - Casing
failures (repair) Migration, Packer Isolation
Problems,SCVF – Gas Migration; Injection &
Disposal - Injection & Disposal Registration,
Applications, Gas Storage, Heavy Oil / SAGD;
Suspensions
ALBERTA ENERGY REGULATORS
25
DDS – Basic User Manual
v 1.1 (May 2013)
GRD (gas removal data) –contact the GRD
Admin. – [email protected] - to request that
the change of company name on the old permit
to the new company name – after this change
the client will be able to view the permit under
the new company BA Code (new company)
3.6 ACRONYM REFERENCES
BA Code
Business Associate Code
CMSA
Company Master Security Administrator
CRC
Core Research Centre
DS
Directional Surveys
DDS
Digital Data Submission
EAS
Electronic Application Submission – this is for Facilities
EPAP
Enhanced Production Audit Program
ERP or EPA
Emergency Response Plan
FIS
Field Inspection Surveillance
FSOB
Field Surveillance Operations Branch
GRD
Gas Removal Data
LLR
Licensee Liability Rating
LMR
Liability Management Rating
OWL
Oil Waste Liability
OGCR
Oil and Gas Conservation Regulations
WDS
Well Data Services
WTC
Well Test Capture
WM
Waste Management
ALBERTA ENERGY REGULATORS
26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement