EDS-Surface Dispositions User Manual

EDS-Surface Dispositions User Manual
EDS - Surface Dispositions User Manual
April 25, 2012
EDS-Surface Dispositions User Manual
Revision History
Version
Date
Author/Organization
Description
●
Conversion to new standard template
●
●
●
●
●
●
●
●
Added “Amend One of Associated Disposition
Minor edits though out the document
Conversion to new standard template
Added “Amend One of Associated Disposition
Minor edits though out the document
Added new dispositions types EZE, VCE, REA
Added changes to PLA
Added New Front Menu Page to EDS
0.01X
2006-10-31
Pauline Peterson
2.0
2006-10-31
Pauline Peterson/SRD
3.0
2007-04-24
Pauline Peterson
3.01
2007-07-19
Krystian Staniszewski
Updated screenshots
3.02
2008-01-18
Krystian Staniszewski
Updated screenshots and text to reflect the new
large land list functionality.
4.0
2012-03-07
Jon Pelster
Updated screenshots and text. Reformatted.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 2 of 42
EDS-Surface Dispositions User Manual
Disclaimer
In this disclaimer provision:
“Crown” means Her Majesty the Queen in right of the Province of Alberta;
“Minister” means the Minister responsible of the Alberta Sustainable Resource Development;
“Their employees” means and includes each, any and every officer, employee, servant and agent of
either or both of the Crown and the Minister and without limiting the generality of the foregoing, and
includes employees of the Crown and the Minister employed in Alberta Sustainable Resource
Development.
“EDS” means the Electronic Disposition System and all programs, hardware, documentation,
functions and services forming a part thereof or associate therewith.
The Crown, the Minister and their employees and the contractors and technical advisors of the aforesaid:
(a) Make no warranty or representation, whether expressed or implied, to any person with respect to
this material or documentation of EDS or as to the service, performance, quality, merchantability
or fitness of any part of the aforesaid for any purpose; and
(b) Shall not be liable for any action, damages or claims, whether occasioned by negligence or
otherwise, that any person, user, Subscriber or any employees of the aforesaid may hereafter
have, allege or become entitled to (including but not limited to any claim of third-party
contribution of indemnity, any economic or moral loss, or direct, immediate, special, indirect or
consequential damages which do, may, or are alleged to arise as a result of:
(i) The use of this material or documentation or EDS or any service connection therewith; or
(ii) Any error or omissions in data or any loss or partial loss of data or incomplete retrieval of
information, even if any or all of the Crown, the Minister or their employees were advised of
the possibility of such risk, action, claims or damages, including damages sustained or actions
brought by third parties and claims made against the Subscriber by third parties.
The entire risk of loss relating to or associated with the quality and performance of EDS and any product
and results thereof shall be assumed by the Subscriber and by any other user of EDS.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 3 of 42
EDS-Surface Dispositions User Manual
Table of Contents
1. EDS Overview ......................................................................................................................... 5
1.1 Hours of Operations ...................................................................................................................... 5
1.2 EDS Use Restrictions ..................................................................................................................... 5
1.3 Attachment Requirements ............................................................................................................ 6
1.3.1 Documents .............................................................................................................................. 6
1.3.2 Plan Package ........................................................................................................................... 6
1.4 Relevant Links .............................................................................................................................. 6
2. EDS Front Page ....................................................................................................................... 7
2.1 Help ................................................................................................................................................. 8
3. Public Land Disposition Applications & Amendments Menu .......................................... 10
4. EDS Disposition Module Screens ........................................................................................ 11
4.1 Client ID Search ......................................................................................................................... 11
4.2 Client Search Results ................................................................................................................. 12
4.3 Application for Surface Disposition.......................................................................................... 14
4.3.1 Application for PLA Surface Disposition ............................................................................. 20
4.3.2 Application for EZE Surface Disposition ............................................................................. 21
4.4 Attachments ................................................................................................................................ 22
4.5 Application Acceptance ............................................................................................................. 23
4.6 Amendment for Surface Disposition......................................................................................... 25
4.7 Submission Review ..................................................................................................................... 33
4.8 Submit Plan Submission Package ............................................................................................. 34
4.9 Plan Package Acceptance .......................................................................................................... 35
5.
Using EDS ............................................................................................................................. 36
5.1 Creating an Application............................................................................................................. 36
5.2 Creating an Amendment ........................................................................................................... 37
5.3 Submitting a Plan Package ........................................................................................................ 38
6.
Getting Support.................................................................................................................... 38
Appendix A – Electronic Application/Amendment Form ....................................................... 39
Appendix B – Surface Disposition Purposes ............................................................................ 41
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 4 of 42
EDS-Surface Dispositions User Manual
1.
EDS Overview
EDS (Electronic Disposition System) is an online service that allows clients to submit specified
applications/amendments and documents for surface dispositions to SRD electronically. Presently EDS
has 5 subsystems:
Public Land Disposition Applications & Amendments - This selection will enable you to submit
applications or amendments for dispositions on public lands for EZE, LOC, MSL, PLA, PIL,
REA SML & VCE purposes.
Disposition Maintenance - This selection will enable you to submit AOA Monthly Status Report
and create a Site Entry notification.
Reclamation Certificate Application Submissions - This selection will enable you to submit
application for Reclamation Certificate on Public Land.
Public Lands Disposition Enhanced Approval - All applications for upstream oil and gas
activities, (excluding in-situ oils sands production, oil sands mines operations and those
dispositions being applied for through the AOA process) for the disposition types of Mineral
Surface Lease (MSL), License of Occupation for access (LOC), Pipeline Agreement (PLA), and
Pipeline Installation Lease (PIL) must be submitted through the "Public Land Disposition
Enhanced Approval" selection #4, effective September 1st, 2010.
Any disposition applications that are outside of the scope of the "Public Land Disposition
Enhanced Approval" selection #4, must be submitted through the "Public Land Disposition
Application & Amendments" selection #1, or "Disposition Maintenance" selection #2,as
appropriate.
Any disposition application submissions that are in scope of the "Public Land Disposition
Enhanced Approval" selection #4, and submitted through any other selections will be rejected.
Any disposition applications submitted through the "Public Land Disposition Enhanced
Approval" selection #4, that are outside of the defined scope will be rejected.
Application/Amendment Status Check Request - This selection will enable you to send a request
for the status of application/amendment. This must be used to request a status of an application
processed by the Industrial, Oil and Gas Applications Unit. For details about each of the
subsystems please review the individual User Manual.
EDS will allow clients to submit applications and amendments during extended hours. It will also provide
validation of selected data fields at the client workstation thereby assisting the client to minimize the
opportunity for errors on the submission.
Applications that are accepted by EDS for uploading to GLIMPS (Geographic Land Information
Management Planning System) will be assigned an activity number by EDS and emailed back to the
client along with a copy of the application. The opportunity that will be provided by this automated
system will ensure that clients are provided with efficient and consistent service.
1.1
Hours of Operations
EDS Support help desk is available Monday to Friday 8:15 am to 4:30 pm except statutory holidays. The
system is available from 6:30 am to 10:00 pm everyday.
1.2
EDS Use Restrictions
EDS is limited to MSL, LOC, PLA, PIL, EZE, VCE, SML and REA disposition types for processing
applications and amendments.
Applications or amendments processed using EDS at this time must have only one applicant.
The maximum number of different dispositions types on a plan is two.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 5 of 42
EDS-Surface Dispositions User Manual
Confirmation Number can only be used once.
One selected purpose for each disposition type only.
Multiple plans for an activity will not be accepted.
Clients and stakeholders involved must be active and registered in LSAS
Successful submission does not denote approval by the Crown
1.3
Attachment Requirements
1.3.1 Documents
All documents submitted to the department other than the plan submission package and the AOA
Monthly Status Report must be in a Microsoft Word (.doc) or portable document format (PDF).
Documents that require imaging must be scanned to the following standard and converted into a PDF
format for submission.
Black & white 300 dpi
Colour
150 dpi
The file naming must not contain spaces or more than one dot (period). Use of special characters such as
*, -, (, ), @, %, $, or % are not allowed in the file name.
1.3.2 Plan Package
Other than filing administrative amendments, a plan package is required for all applications and
amendments. The plan package is an encrypted file that is produced and downloaded from the Plan
Confirmation Service (PCS) system. Within this encrypted file is the plan in a PDF format, CAD
drawing and an attribution file, XML.
1.4
Relevant Links
EXTERN ADS User Name & Password Maintenance
https://extern.wln.gov.ab.ca/help/User_Name_Maint.asp?a=SA
The link above is where to activate Securexnet accounts and change/reset Securexnet passwords.
SecureXNET EDS https://securexnet.env.gov.ab.ca/eds_login.html
The link above is where to access EDS through Securexnet.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 6 of 42
EDS-Surface Dispositions User Manual
2.
EDS Front Page
After successfully signing on, Industry Clients will be presented with a menu that offers three service
options. The service options are:
Public Land Disposition Applications & Amendments
April 25, 2012
o
Create applications
o
Amend dispositions
o
Amend two associated dispositions
o
Amend One of two associated dispositions
o
Amend an existing disposition and create a new associated disposition
o
Plan package submission for paper applications and amendments
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 7 of 42
EDS-Surface Dispositions User Manual
Disposition Maintenance
o
Submission for AOA Monthly Reports
o
Submission of Site Entry Notification
Reclamation Certificate Application Submissions
o
Submit an application for a reclamation certificate
Public Lands Disposition Enhanced Approval
2.1
o
Create applications
o
Create two associated dispositions
o
Amend dispositions
o
Amend two associated dispositions
o
Submit final plan dispositions
o
Submit two associated final plan dispositions
Help
●
The three Help functions, located at the top of the page, are “Contact Us”, “EDS Website” and
“Help”. Selecting ‘Contact Us’ will generate an email to [email protected] where you can
indicate any questions or comments.
●
Selection ‘EDS Website’ will forward you to the EDS website where you can browse information
available.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 8 of 42
EDS-Surface Dispositions User Manual
Clicking Help will take you to the online EDS manual.
The Online Help will show a number of topics are displayed.
To print any topic right click your mouse and select print.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 9 of 42
EDS-Surface Dispositions User Manual
3.
Public Land Disposition Applications & Amendments Menu
After selecting Public Land Disposition Applications & Amendments, Industry Clients will be
presented with a menu that offers a total of seven options within three categories. The options are:
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 10 of 42
EDS-Surface Dispositions User Manual
Create Application for Surface Disposition
o
Create a single application
o
Create two associated applications
Amend Surface Disposition
o
Amend a single disposition
o
Amend two associated dispositions
o
Amend One of two associated dispositions
o
Amend an existing disposition and create a new associated disposition
Plan Package Submission
The Industry Client will be required to provide further information on this menu. The type of information
required is based upon the chosen service option. Refer to Section 3 for details regarding the content of
this menu.
Menu navigation, menu bar format, toolbar format
MS Windows GUI (i.e. minimize, maximize windows etc.), explain how to get to MS
Windows help
Table lookups
4.
EDS Disposition Module Screens
4.1
Client ID Search
Client Search Screen Components
The following table lists all elements available on this screen:
Field or button name
Properties
Name/Remarks
Applicant Client ID
M
APPLICANT CLIENT ID
This is the pre-assigned ID used to identify the applicant
Cancel
BUTTON
CANCEL
Clicking this button will cancel the service and return to the
Industry Client menu
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 11 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
Next
BUTTON
NEXT
Clicking this button will trigger a validation of the APPLICANT
CLIENT ID. If valid, the Client Search Results screen will be
displayed. If not valid, an error screen will be displayed.
Legend: M :
O :
Mandatory field
Optional field
Error message will display
Client ID entered must be 10-digit
number
Client ID must match LSAS record
Client ID must be valid and active
Client ID cannot be of type “Mineral”
Client ID entered is not validated
against the stakeholder name
4.2
Client Search Results
Client Search Results Screen Components
The following table lists all elements available on this screen:
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 12 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
Applicant Client ID
DISPLAY
ONLY
APPLICANT CLIENT ID
DISPLAY
ONLY
ORGANIZATION NAME
DISPLAY
ONLY
ADDRESS
DISPLAY
ONLY
CITY
DISPLAY
ONLY
PROVINCE/STATE
DISPLAY
ONLY
POSTAL/ZIP
DISPLAY
ONLY
COUNTRY
BUTTON
CANCEL
Organization Name
Address
City
Province/State
Postal/Zip
Country
Cancel
This is the APPLICANT CLIENT ID specified on the previous
screen.
This is the name of the applicant organization.
This is the street address of the organization.
This is the city associated with the address of the organization.
This is the province or state associated with the address of the
organization.
This is the postal or zip code associated with the address of the
organization.
This is the country associated with the address of the
organization.
Clicking this button will cancel the service and return to the
Industry Client menu.
Back
BUTTON
BACK
Clicking this button triggers a return to the Client Search screen.
Next
BUTTON
NEXT
Clicking this button will trigger a validation of the APPLICANT
CLIENT ID. If valid, the Applicant Search Result screen will be
displayed. If not valid, an error screen will be displayed.
Legend:
April 25, 2012
M :
Mandatory field
O :
Optional field
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 13 of 42
EDS-Surface Dispositions User Manual
4.3
Application for Surface Disposition
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 14 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
Disposition Type
DISPLAY
ONLY
DISPOSITION TYPE
M
PLAN CONFIRMATION #
Plan Confirmation No.
This is the DISPOSITION TYPE as specified on the Industry
Client menu.
This is the confirmation number of the submission package.
THE ACCEPTABLE FORMAT IS YEAR##### (IE. 200650095)
EFR attached? Yes
EFR attached? No
RADIO
BUTTON
EFR ATTACHED? YES
RADIO
BUTTON
EFR ATTACHED? NO
Choosing this radio button indicates that an EFR is going to
be attached to the surface disposition application. When
selected, an edit check will be performed to ensure that an
EFR attachment is supplied with the surface disposition
application. This is mutually exclusive with the No radio
button.
Choosing this radio button indicates that no EFR will be
provided with the surface disposition application. When
selected, an edit check will be performed to ensure that AOA
# or a REASON is specified. This is mutually exclusive with
the Yes radio button.
AOA #
DROPDOWN AOA #
LIST
A valid AOA number must be supplied if the EFR
O
ATTACHED? NO Radio Button is checked and a REASON is not
supplied. A valid AOA # is a number that has been provided
by Alberta Sustainable Resource Development and has not
expired. All valid AOA numbers will be provided through a
dropdown list. The list is populated based upon the
APPLICANT CLIENT ID.
Reason
O
REASON
This allows a reason to be provided indicating why an EFR is
not being attached and AOA # is not being provided with the
surface disposition application.
The maximum character limit for this field is 50.
Occupant’s Consent
RADIO
Required/Not Required BUTTON
OCCUPANTS’ CONSENT REQUIRED/NOT REQUIRED
A surface disposition application may require attachments be
provided in the form of occupants’ consent documents.
Choosing Required enables the “Indicate the number of
consent forms to attach” and “# of Consents to Follow” field.
Indicate the number of DROPDOWN INDICATE THE NUMBER OF CONSENT FORMS TO ATTACH
consent forms to attach LIST
This drop down box is provided to enable the applicant to
attach such consents as part of the surface disposition
application. For example, if the applicant has a requirement to
attach one occupants’ consent, then 5 should be selected from
the drop down list. At the appropriate time, the application
will be given the opportunity to attach the occupants’ consent
and up to 9 more. If a value greater than 0 is selected within
this field, then at least one occupants’ consent must be
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 15 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
attached to the surface disposition application.
Only .doc and .pdf documents are acceptable formats. No
spaces or special characters are allowed in the file naming
scheme.
# Of Consents to
Follow
O
# OF CONSENTS TO FOLLOW
Code of Practice
Yes/No
RADIO
BUTTON
CODE OF PRACTICE
DISPLAY
ONLY
APPLICANT NAME
O
FILE #
This allows the user to enter in the number of consent forms
intended to be sent by the applicant directly (by fax, etc.) after
the application has been submitted in EDS. For example, if
the applicant has a requirement to include three consents, then
3 should be entered into this field. “To Follow” attachments
will not be requested by EDS during the application process.
Choosing the ‘Yes’ radio button indicates that a Water Act
Notice must be attached to the surface disposition application.
When selected, an edit check will be performed to ensure that
the attachment is supplied with the surface disposition
application. Choosing the ‘No’ radio button indicates that a
Water Act Notice is not required. This is mutually exclusive
with the ‘Yes’ radio button.
Applies to PLA disposition type only.
Applicant Details
Applicant Name
File #
This is the name of the applicant organization.
A reference number used by the applicant organization to refer
to the surface disposition application. This field is for the
applicants’ internal use only and will not be validated by the
EDS application.
Address
DISPLAY
ONLY
ADDRESS
This is the street address of the applicant organization.
Tel
M
TEL
This is the telephone number associated with the applicant
organization. A valid North American telephone number must
be entered in this field. Format (NNN)NNN-NNNN
City
Fax
DISPLAY
ONLY
CITY
O
FAX
This is the city associated with the address of the applicant
organization.
This is the fax number associated with the applicant
organization. A valid North American fax number is optional
within this field. Format (NNN)NNN-NNNN.
Province/State
April 25, 2012
DISPLAY
ONLY
PROVINCE/STATE
This is the province or state associated with the address of the
applicant organization.
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 16 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
Postal/ZIP
DISPLAY
ONLY
POSTAL/ZIP
DISPLAY
ONLY
COUNTRY
O
FILE #
Country
This is the postal or zip code associated with the address of
the applicant organization.
This is the country associated with the address of the applicant
organization.
Contact Details
File #
A reference number used by the Contact to refer to the surface
disposition application. This field is for the Contacts’ internal
use only and will not be validated by the EDS application.
Organization Name
Contact Name
Email
Address
Tel
City
Fax
Province/State
Postal/ZIP
Country
April 25, 2012
DISPLAY
ONLY
ORGANIZATION NAME
DISPLAY
ONLY
CONTACT NAME
DISPLAY
ONLY
EMAIL
DISPLAY
ONLY
ADDRESS
DISPLAY
ONLY
TEL
DISPLAY
ONLY
CITY
DISPLAY
ONLY
FAX
DISPLAY
ONLY
PROVINCE/STATE
DISPLAY
ONLY
POSTAL/ZIP
DISPLAY
ONLY
COUNTRY
This is the name of the Organization for the Contact for the
surface disposition application. It is resolved via the user sign
on.
This is the name of the Contact for the surface disposition
application. It is resolved via the user sign on.
This is the e-mail address of the Contact for the surface
disposition application. It is resolved via the user sign on.
This is the street address of the Contact for the surface
disposition application.
This is the telephone number of the Contact for the surface
disposition application. A valid North American telephone
number must be entered in this field. Format (NNN)NNNNNNN
This is the city associated with the address of the Contact for
the surface disposition application.
This is the fax number associated with the Contact for the
surface disposition application.
This is the province or state associated with the address of the
Contact for the surface disposition application
This is the postal or zip code associated with the address of
the Contact for the surface disposition application.
This is the country associated with the address of the Contact
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 17 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
for the surface disposition application.
Purpose of Disposition
M
PURPOSE OF DISPOSITION
This is the purpose for the surface disposition application.
This field is a drop down list that has been pre-populated with
the first record on the drop-down list based on the available
purposes for the DISPOSITION TYPE.
Land being applied
for
Upload Large Land List O
Upload Large Land List
Used to indicate whether a land list will be uploaded in a
separate excel spreadsheet document instead of being entered
row by row using the ‘Add Row” button.
Qtr/LS
O
QTR/LS
Quarter section and/or legal subdivision that constitute an
ATS land parcel for which the surface disposition application
applies.
Sec
O
SEC
Section that constitutes an ATS land parcel for which the
surface disposition application applies.
Twp
O
TWP
Township that constitutes an ATS land parcel for which the
surface disposition application applies.
Rge
O
RGE
Range that constitutes an ATS land parcel for which the
surface disposition application applies.
Mer
O
MER
Meridian that constitutes an ATS land parcel for which the
surface disposition application applies.
Add Row
BUTTON
ADD ROW
Clicking this button will allow additional rows of ATS parcels
to be added.
You can add up to 300 records in this section of the form.
Name of Subdivision
M
NAME OF SUBDIVISION
Name of subdivision that constitutes a PBL land parcel for
which the surface disposition application applies.
Subdivision Plan
M
SUBDIVISION PLAN
Name of subdivision plan that constitutes a PBL land parcel
for which the surface disposition application applies.
Block
O
BLOCK
Name of block that constitutes a PBL land parcel for which
the surface disposition application applies.
Lot
O
LOT
Lot number that constitutes a PBL land parcel for which the
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 18 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
surface disposition application applies.
Parcel
O
PARCEL
Parcel that constitutes a PBL land parcel for which the surface
disposition application applies.
Add Row
BUTTON
ADD ROW
Clicking this button will allow additional rows of PBL parcels
to be added.
You can add up to 150 records in this section of the form.
Additional Remarks
O
ADDITIONAL REMARKS
Free format text for any additional comments to be made. The
maximum character for this field is 150. This field is used to
inform that more consents are to follow
Cancel
BUTTON
CANCEL
Clicking this button will cancel the service and returns to the
Industry Client menu.
Back
BUTTON
BACK
Clicking this button triggers a return to the Client Search
screen.
Next
BUTTON
NEXT
Clicking this button will trigger a validation of the surface
disposition application. In the event that errors are detected, a
screen listing all errors will be presented. If no errors are
detected, the Attachments screen will be displayed.
Legend: M :
O :
April 25, 2012
Mandatory field
Optional field
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 19 of 42
EDS-Surface Dispositions User Manual
4.3.1 Application for PLA Surface Disposition
Field or button name
Properties
Name/Remarks
C&R Application #
O
C&R APPLICATION #
This is a conservation and reclamation number. It applies to
PLA disposition type only with the purpose of pipeline only.
C&R Class
Legend: M :
O :
April 25, 2012
DROPDOW C&R CLASS
N LIST
This is a conservation and reclamation class. It applies to PLA
disposition type only with the purpose of pipeline.
Mandatory field
Optional field
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 20 of 42
EDS-Surface Dispositions User Manual
4.3.2 Application for EZE Surface Disposition
Field or button name
Properties
Name/Remarks
Length
O
LENGTH
Provide the length of the powerline in kilometer to 2 decimal
places
Kilovolts
O
KILOVOLTS
Provide the kilovolts of the powerline only.
Legend: M :
O :
Mandatory field
Optional field
Note: Errors will display for different reasons, for example telephone number is missing
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 21 of 42
EDS-Surface Dispositions User Manual
4.4
Attachments
Attachment for EFR required only if EFR attached flag is set to Yes. ‘Land Description’ only
required if radio box for ‘Upload Large Land List’ is set to Yes.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 22 of 42
EDS-Surface Dispositions User Manual
Attachments Screen Components
The following table lists all elements available on this screen:
Field or button name
Properties
Name/Remarks
Browse
BUTTON
BROWSE
Clicking this button will invoke a dialogue to locate and select
the required file.
Cancel
BUTTON
CANCEL
Clicking this button will cancel the service and return to the
Industry Client menu.
Next
BUTTON
NEXT
Clicking this button will trigger a validation of the surface
disposition application. In the event that errors are detected, a
screen listing all errors will be presented. If no errors are
detected, the Application Review screen will be displayed.
Legend:
4.5
M :
Mandatory field
O :
Optional field
Application Acceptance
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 23 of 42
EDS-Surface Dispositions User Manual
Application Acceptance Screen Components
The following table lists all elements available on this screen:
Field or button name
Properties
Name/Remarks
Reference #
DISPLAY
ONLY
REFERENCE #
DISPLAY
ONLY
DISPOSITION #
Disposition #
Display and Print Form BUTTON
This is a unique number generated when a surface disposition
application has been accepted.
This is a unique number generated when a surface disposition
application has been accepted.
DISPLAY AND PRINT FORM
Clicking this button will invoke a dialogue to view and print the
surface disposition application as accepted by EDS.
Finish
BUTTON
FINISH
Clicking this button completes the service and returns to the
Industry Client menu.
Legend:
April 25, 2012
M :
Mandatory field
O :
Optional field
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 24 of 42
EDS-Surface Dispositions User Manual
4.6
Amendment for Surface Disposition
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 25 of 42
EDS-Surface Dispositions User Manual
Amendment for Surface Disposition Screen Components
The following table lists all elements available on this screen:
Field or button name
Properties
Name/Remarks
Disposition #
DISPLAY
ONLY
DISPOSITION #
M
PLAN CONFIRMATION #
Plan Confirmation #
This is the DISPOSITION # as specified on the Industry Client
menu.
This is the confirmation number of the submission package.
THE ACCEPTABLE FORMAT IS YEAR##### (IE. 200650095)
EFR attached? Yes
EFR attached? No
RADIO
BUTTON
EFR ATTACHED? YES
RADIO
BUTTON
EFR ATTACHED? NO
Choosing this radio button indicates that an EFR is going to
be attached to the surface disposition amendment. When
selected, an edit check will be performed to ensure that an
EFR attachment is supplied with the surface disposition
amendment. This is mutually exclusive with the No radio
button.
Choosing this radio button indicates that no EFR will be
provided with the surface disposition amendment. When
selected, an edit check will be performed to ensure that an
AOA# or a REASON is specified. This is mutually exclusive
with the Yes radio button.
AOA #
DROPDOWN AOA #
LIST
A valid AOA number must be supplied if the ‘EFR
O
ATTACHED?’ No Radio Button is checked and a REASON is
not supplied. A valid AOA # is a number that has been
provided by Alberta Sustainable Resource Development and
has not expired. All valid AOA numbers will be provided
through a dropdown list. The list is populated based upon the
APPLICANT CLIENT ID.
Reason
O
REASON
This allows a reason to be provided indicating why an EFR is
not being attached and an AOA # is not being provided with
the surface disposition amendment.
The maximum character limit for this field is 50.
Occupant’s Consent
RADIO
Required/Not Required BUTTON
OCCUPANT’S CONSENT REQUIRED/NOT REQUIRED
A surface disposition application may require attachments be
provided in the form of occupants consent documents.
Choosing ‘Required’ enables the “Indicate the number of
consent forms to attach” and “# of Consents to Follow” field.
Indicate the number of DROPDOWN INDICATE THE NUMBER OF CONSENT FORMS TO ATTACH
consent forms to attach LIST
This drop down box is provided to enable the applicant to
attach such consents as part of the surface disposition
application. For example, if the applicant has a requirement to
attach one occupants’ consent, then 5 should be selected from
the drop down list. At the appropriate time, the application
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 26 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
will be given the opportunity to attach the occupants’ consent
and up to 9 more. If a value greater than 0 is selected within
this field, then at least one occupants’ consent must be
attached to the surface disposition application.
Only .doc and .pdf documents are acceptable formats. No
spaces or special characters are allowed in the file naming
scheme.
# of Consents to Follow O
# OF CONSENTS TO FOLLOW
This allows the user to enter in the number of consent forms
intended to be sent by the applicant directly (by fax, etc.) after
the application has been submitted in EDS. For example, if
the applicant has a requirement to include three consents, then
3 should be entered into this field. “To Follow” attachments
will not be requested by EDS during the application process.
Code of Practice
Yes/No
RADIO
BUTTON
CODE OF PRACTICE
Choosing the ‘Yes’ radio button indicates that a Water Act
Notice must be attached to the surface disposition amendment.
When selected, an edit check will be performed to ensure that
the attachment is supplied with the surface disposition
amendment. Choosing the ‘No’ radio button indicates that a
Water Act Notice is not required. This is mutually exclusive
with the ‘Yes’ radio button.
Applies to PLA disposition type only.
Reason for
Amendment
Change of Route
CHECKBOX CHANGE OF ROUTE
Checking this box indicates that the surface disposition
amendment pertains to a change of route. When checked, a
validation will be performed to ensure that a plan submission
package has been provided as part of the surface disposition
amendment.
Change of Location
CHECKBOX CHANGE OF LOCATION
Checking this box indicates that the surface disposition
amendment pertains to a change of location. When checked,
a validation will be performed to ensure that a plan
submission package has been provided as part of the surface
disposition amendment.
Width of Right-of-Way CHECKBOX WIDTH OF RIGHT-OF-WAY
Checking this box indicates that the surface disposition
amendment pertains to a change to the width of a right-ofway. When checked, a validation will be performed to ensure
that a plan submission package has been provided as part of
the surface disposition amendment.
From
O
FROM
This is the width of the right-of-way as specified on the
original surface disposition amendment. It is mandatory if the
WIDTH OF RIGHT-OF-WAY box is checked.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 27 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
To
O
TO
This is the amended width of the right-of-way. It is
mandatory if the WIDTH OF RIGHT-OF-WAY box is checked.
Dimensions
CHECKBOX DIMENSIONS
Checking this box indicates that the surface disposition
amendment pertains to a change to the dimensions. When
checked, a validation will be performed to ensure that a plan
submission package has been provided as part of the surface
disposition amendment.
From
O
FROM
This is the dimension as specified on the original surface
disposition amendment. It is mandatory if the DIMENSIONS
box is checked.
To
O
TO
This is the amended dimension. It is mandatory if the
DIMENSIONS box is checked.
Purpose of Disposition
CHECKBOX PURPOSE OF DISPOSITION
Checking this box indicates that the surface disposition
amendment pertains to a change to the purpose. When
checked, a validation will be performed to ensure that a plan
submission package has been provided as part of the surface
disposition amendment.
From
O
FROM
This is the purpose as specified on the original surface
disposition amendment. It is mandatory if the PURPOSE OF
DISPOSITION box is checked.
To
O
TO
This is the amended purpose. It is mandatory if the PURPOSE
OF DISPOSITION box is checked.
Plan Submission
Package Replacement
O
Other
O
PLAN SUBMISSION PACKAGE REPLACEMENT
Checking this box indicates that the surface disposition
amendment pertains to a plan submission package
replacement. When checked, a validation will be performed
to ensure that a plan submission package has been provided as
part of the surface disposition amendment.
OTHER
Free format text for any additional description of the
amendment. NOTE: for this section there is no request for a
confirmation package or validation for a confirmation number.
Applicant Details
Applicant Name
File #
April 25, 2012
DISPLAY
ONLY
APPLICANT NAME
O
FILE #
This is the name of the applicant organization.
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 28 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
A reference number used by the applicant organization to refer
to the surface disposition amendment. This field is for the
applicants’ internal use only and will not be validated by the
EDS application.
Address
Tel
DISPLAY
ONLY
ADDRESS
M
TEL
This is the street address of the applicant organization.
This is the telephone number associated with the applicant
organization. A valid North American telephone number must
be entered in this field. Format (NNN)NNN-NNNN
City
Fax
DISPLAY
ONLY
CITY
O
FAX
This is the city associated with the address of the applicant
organization.
This is the fax number associated with the applicant
organization. A valid North American fax number is optional
within this field. Format (NNN)NNN-NNNN.
Province/State
Postal/ZIP
Country
DISPLAY
ONLY
PROVINCE/STATE
DISPLAY
ONLY
POSTAL/ZIP
DISPLAY
ONLY
COUNTRY
O
FILE #
This is the province or state associated with the address of the
applicant organization.
This is the postal or zip code associated with the address of
the applicant organization.
This is the country associated with the address of the applicant
organization.
Contact Details
File #
A reference number used by the Contact to refer to the surface
disposition amendment. This field is for the Contacts’ internal
use only and will not be validated by the EDS application.
Organization Name
Contact Name
Email
Address
April 25, 2012
DISPLAY
ONLY
ORGANIZATION NAME
DISPLAY
ONLY
CONTACT NAME
DISPLAY
ONLY
EMAIL
DISPLAY
ONLY
ADDRESS
This is the name of the Organization for the Contact for the
surface disposition amendment. It is resolved via the user sign
on.
This is the name of the Contact for the surface disposition
amendment. It is resolved via the user sign on.
This is the e-mail address of the Contact for the surface
disposition amendment. It is resolved via the user sign on.
This is the street address of the Contact for the surface
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 29 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
disposition amendment.
Tel
DISPLAY
ONLY
TEL
DISPLAY
ONLY
CITY
DISPLAY
ONLY
FAX
DISPLAY
ONLY
PROVINCE/STATE
DISPLAY
ONLY
POSTAL/ZIP
DISPLAY
ONLY
COUNTRY
City
Fax
Province/State
Postal/ZIP
Country
Purpose of Disposition
This is the telephone number associated with the Contact for
the surface disposition amendment. A valid North American
telephone number must be entered in this field. Format
(NNN)NNN-NNNN
This is the city associated with the address of the Contact for
the surface disposition amendment.
This is the fax number associated with the Contact for the
surface disposition amendment.
This is the province or state associated with the address of the
Contact for the surface disposition amendment
This is the postal or zip code associated with the address of
the Contact for the surface disposition amendment.
This is the country associated with the address of the Contact
for the surface disposition amendment.
DROPDOWN PURPOSE OF DISPOSITION
O
This is the purpose for the surface disposition amendment.
This field is a drop down list that has been pre-populated
based on the available purposes for the DISPOSITION TYPE.
Land being applied
for
Upload Large Land List O
Upload Large Land List
Used to indicate whether a land list will be uploaded in a
separate excel spreadsheet document instead of being entered
row by row using the ‘Add Row” button.
Action
DROPDOWN ACTION
LIST
Indicates the update action to be applied against the ATS land
parcel.
Qtr/LS
O
QTR/LS
Quarter section and/or legal subdivision that constitute an
ATS land parcel for which the surface disposition amendment
applies.
Sec
O
SEC
Section that constitutes an ATS land parcel for which the
surface disposition amendment applies.
Twp
O
TWP
Township that constitutes an ATS land parcel for which the
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 30 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Name/Remarks
surface disposition amendment applies.
Rge
O
RGE
Range that constitutes an ATS land parcel for which the
surface disposition amendment applies.
Mer
O
MER
Meridian that constitutes an ATS land parcel for which the
surface disposition amendment applies.
Add Row
BUTTON
ADD ROW
Clicking this button will allow additional rows of ATS parcels
to be added.
Action
DROPDOWN ACTION
LIST
Indicates the update action to be applied against the PBL land
parcel.
Name of Subdivision
M
NAME OF SUBDIVISION
Name of subdivision that constitutes a PBL land parcel for
which the surface disposition amendment applies.
Subdivision Plan
M
SUBDIVISION PLAN
Name of subdivision plan that constitutes a PBL land parcel
for which the surface disposition amendment applies.
Block
O
BLOCK
Name of block that constitutes a PBL land parcel for which
the surface disposition amendment applies.
Lot
O
LOT
Lot number that constitutes a PBL land parcel for which the
surface disposition amendment applies.
Parcel
O
PARCEL
Parcel that constitutes a PBL land parcel for which the surface
disposition amendment applies.
Add Row
BUTTON
ADD ROW
Clicking this button will allow additional rows of PBL parcels
to be added.
Additional Remarks
O
ADDITIONAL REMARKS
Free format text for any additional comments to be made.
Cancel
BUTTON
CANCEL
Clicking this button will cancel the service and returns to the
Industry Client menu.
Back
BUTTON
BACK
Clicking this button triggers a return to the Client Search
screen.
Next
BUTTON
NEXT
Clicking this button will trigger a validation of the surface
disposition amendment. In the event that errors are detected, a
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 31 of 42
EDS-Surface Dispositions User Manual
Field or button name
Legend:
Properties
M :
Mandatory field
O :
Optional field
Name/Remarks
screen listing all errors will be presented. If no errors are
detected, the ‘Attachments’ screen will be displayed.
NOTE: Any added lands under the ‘Add Land Action’ will automatically be added to the ‘Lands
Required’ column in the amendment form.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 32 of 42
EDS-Surface Dispositions User Manual
4.7
Submission Review
Submission Review Screen Components
The following table lists all elements available on this screen:
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 33 of 42
EDS-Surface Dispositions User Manual
Field or button name
Properties
Click here to correct the LINK
above item
Click here to correct
attachments
LINK
Submit
BUTTON
Name/Remarks
CLICK HERE TO CORRECT THE ABOVE ITEM
Clicking this link will allow the user to go back to the
Application for Surface Disposition Screen or Amendment for
Surface Distribution Screen to correct the data that has been
entered previously.
CLICK HERE TO CORRECT ATTACHMENTS
Clicking this link will allow the user to go back to the
Attachment Screen to reattach application attachments.
SUBMIT
Clicking this button will attempt to submit the entire validated
disposition and attachments. In the event that errors are
detected, a screen listing all errors will be presented. If no
errors are detected, the Application Acceptance Screen will be
displayed.
Legend:
4.8
M :
Mandatory field
O :
Optional field
Submit Plan Submission Package
Submit Plan Submission Package Screen Components
The following table lists all elements available on this screen:
Field or button name
Properties
Name/Remarks
Browse
BUTTON
BROWSE
Clicking this button will invoke a dialogue to locate and select
the required file.
Cancel
BUTTON
CANCEL
Clicking this button will cancel the service and returns to the
Industry Client menu.
Next
BUTTON
NEXT
Clicking this button will trigger a validation of the package. In
the event that errors are detected, a screen listing all errors will
be presented. If no errors are detected, the Plan Package
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 34 of 42
EDS-Surface Dispositions User Manual
Field or button name
Legend:
4.9
Properties
M :
Mandatory field
O :
Optional field
Name/Remarks
Acceptance screen will be displayed.
Plan Package Acceptance
Plan Package Acceptance Screen Components
The following table lists all elements available on this screen:
Field or button name
Properties
Name/Remarks
Reference #
DISPLAY
ONLY
REFERENCE #
DISPLAY
ONLY
DISPOSITION #
DISPLAY
ONLY
Confirmation #
BUTTON
FINISH
Disposition #
Confirmation #
Finish
This is a unique number generated when a plan package has
been accepted.
This is the disposition number provided on the Industry Client
menu.
This is the confirmation number provided on the Industry Client
menu.
Clicking this button completes the service and returns to the
Industry Client menu.
Legend:
April 25, 2012
M :
Mandatory field
O :
Optional field
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 35 of 42
EDS-Surface Dispositions User Manual
5.
Using EDS
5.1
Creating an Application
1) Select
a. Create single application
b. Create two associated applications
2) Click on the NEXT button
3) Input the Client ID and click on the NEXT button
4) Confirm the client information and click on the NEXT button
5) Input the confirmation number
6) Select EFR to be attached ‘YES’ or ‘NO’ if yes indicate the number of documents to be attached.
If no select the AOA or input a reason that the EFR is not attached
7) Select CONSENT required or not if required indicate the number of document to be attached
and/or the number of consents to follow
8) Input the Client file number (optional)
9) Input the Client phone number
10) Input the Client fax number (optional)
11) Confirm the Contact information – if any contact information needs to be changed contact EDS
Support
12) Select a purpose for the application
13) Either click the ADD ROW button and select quarter, input the section, township, range and
meridian, repeating this step for each land that is required for the application, or, instead of
entering each land separately, select YES for the UPLOAD LARGE LAND LIST radio button
where you’ll be able to populate a spreadsheet with all the lands and upload it along with the
other attachments.
14) Click on ADD ROW button. Input name of subdivision, subdivision plan, block, lot or parcel.
Repeat this step for each land that is required for the application
15) Add remarks if required
16) Click NEXT if this is an associated application; the form for the associated application will
appear. Repeat the above steps as required
17) If in step 13 you had chosen to Upload a Large Land List, you’ll be able to download (if you
don’t have it already) the template excel file on this screen by clicking the DOWNLOAD LAND
DESCRIPTION EXCEL TEMPLATE FILE and populate it with the lands pertaining to your
application.
18) Browse for EFR and/or Consents as required for each application submitted to attach
19) Browse for the Land Description Excel file if you chose the Large Land List option in step 13.
20) Browse for the Encrypted Plan Package to attach
21) Click NEXT
22) Confirm the information on each form and the attachments provided
23) Select SUBMIT
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 36 of 42
EDS-Surface Dispositions User Manual
24) The system will generate a disposition number and application form for each activity. You may
view and print the form as needed. Additionally EDS will email the application form to the
Contact email address.
5.2
Creating an Amendment
1) Select either
a. Amend a single disposition and input disposition number
b. Amend two associated dispositions and input disposition numbers
c. Amend one of two associated dispositions and input disposition numbers
d. Amend an existing disposition and create a new associated disposition and input
disposition number
2)
Click on the NEXT button
3) Input the Client ID and click on the NEXT button
4) Confirm the client information and click on the NEXT button
5) Input the confirmation number, for administrative amendments DO NOT ENTER A
CONFIRMATION NUMBER
6) Select EFR to be attached ‘YES’ or ‘NO’ if yes indicate the number of documents to be attached.
If no select the AOA or input a reason that the EFR is not attached
7) Select CONSENT required or not if required indicate the number of document to be attached
and/or the number of consents to follow
8) Select reason for amendment and input data as required, for administrative amendments input
data in the “Other” reason only
9) Input the Client file number (optional)
10) Input the Client phone number
11) Input the Client fax number (optional)
12) Confirm the Contact information – if any contact information needs to be changed contact EDS
Support to change the data.
13) Either click the ADD ROW button and select quarter, input the section, township, range and
meridian, repeating this step for each land that is required for the application, or, instead of
entering each land separately, select YES for the UPLOAD LARGE LAND LIST radio button
where you’ll be able to populate a spreadsheet with all the lands and upload it along with the
other attachments.
14) Click on ADD ROW button. Input name of subdivision, subdivision plan, block, lot or parcel.
Repeat this step for each land that is required for the application
15) Add remarks if required
16) Click NEXT if this is an associated application, the form for the other application will appear
repeat the above steps as required
17) If in step 13 you had chosen to Upload a Large Land List, you’ll be able to download (if you
don’t have it already) the template excel file on this screen by clicking the DOWNLOAD LAND
DESCRIPTION EXCEL TEMPLATE FILE and populate it with the lands pertaining to your
application.
18) Browse for EFR and/or Consents as required for each application submitted to attach as required
19) Browse for the Land Description Excel file if you chose the Large Land List option in step 13.
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 37 of 42
EDS-Surface Dispositions User Manual
20) Browse for the Encrypted Plan Package to attach, for administrative amendments, no plan
package is required
21) Click NEXT
22) Confirm the information on each form and the attachments provided
23) Select SUBMIT
24) The system will generate an amendment form for each amendment filed. You may view and
print the form as needed. Additionally EDS will email the application form to the Contact email
address.
5.3
Submitting a Plan Package
1) Select ‘Submitting Plan Package Only’ and input the disposition number and confirmation
number
2) Click NEXT
3) Browse for Plan Package to attach
4) Click NEXT
5) The system will indicate if the submission was successful with a reference number.
6.
Getting Support
If there are any problems with the SecureXNET login contact the GoA help at (780) 427-3570 and follow
the prompts.
EDS Support Team
Phone enquiries regarding login accounts/passwords or system problems should be directed to:

Email: [email protected]

Phone: (780) 427-3570
Should you require an account, go to srd.alberta.ca and search for the “ EDS, LAT & PCS User ID
Request Form” and send the completed copy to [email protected]
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 38 of 42
EDS-Surface Dispositions User Manual
Appendix A – Electronic Application/Amendment Form
Application for Surface Disposition
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 39 of 42
EDS-Surface Dispositions User Manual
Amendment for Surface Disposition
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 40 of 42
EDS-Surface Dispositions User Manual
Appendix B – Surface Disposition Purposes
Disposition
Type
Purpose
Access Road
LOC
Access Road
EZE
Access Road - Coal/Oil Sands/Quarry/Heavy Oil/Insitu
LOC
Anchor
EZE
Battery Site
MSL
Battery Site And Access Road
MSL
Cathodic Protection/Anode Bed
PIL
Cathodic Protection/Anode Bed
PLA
Coal Mining
MSL
Communications Cable
EZE
Compressor Site
PIL
Compressor Site And Access Road
PIL
Drainage And Irrigation
EZE
Easement Right Of Way
EZE
Fibre Optic Cable
EZE
Fibre Optic Cable
REA
Flare Stack
MSL
Flowline
PLA
Ground Bed
PIL
Header Site
PIL
Header Site And Access Road
PIL
Heater Site
PIL
Heater Site And Access Road
PIL
Heavy Oil In-Situ
MSL
Meter Station Site
PIL
Meter Stn. Site And Access Road
PIL
Oil Sands Facility
MSL
Piezometer Site- Water Monitoring Site Coal/Oil Sands/Quarry/Heavy Oil/Insitu
LOC
Piezometer Site, Water Monitoring Site Industrial
LOC
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 41 of 42
EDS-Surface Dispositions User Manual
Piezometer Site & Access Road, Coal/Oil Sands/Heavy Oil/Insitu
LOC
Piezometer Site & Access Road, Industrial
LOC
Pipeline
PLA
Plant Site
MSL
Plant Site And Access Road
MSL
Powerline
EZE
Powerline
REA
Powerline & Anchor
EZE
Pumping Station Site
PIL
Pumping Station Site And Access Road
PIL
Quarry
MSL
Railway Spurline
EZE
Remote/Off Lease Sump
MSL
Remote/Off Lease Sump & Access Road
MSL
RISER SITE
PIL
Riser Site And Access Road
PIL
Satellite Site
MSL
Satellite Site And Access Road
MSL
Separator Site
PIL
Separator Site And Access Road
PIL
Valve & Dehydrator Site & Flare Stack
PIL
Valve Site
PIL
Valve Site And Access Road
PIL
Vegetation Control
VCE
Water Injection Line
PLA
Wellsite
MSL
Wellsite And Access Road
MSL
Wellsite Water Injection Well
MSL
April 25, 2012
EDS Surface Dispositions User Manual
© 2012 Government of Alberta
Page 42 of 42
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement