Platinum Horizon Standard stairlift Installation Manual

Below you will find brief information for stairlift Horizon Standard. This guide will give you step-by-step instructions on how to install this product. It includes all the necessary information you will need to get the product ready to use, including the type of equipment you will need for the installation, safety instructions, and testing procedures. This manual includes testing, troubleshooting and technical information.

PDF Download
Document
stairlift Horizon Standard Installation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • powered swivel seat
  • remote control
  • safety edges
  • charging points
  • adjustable seat height
  • hand winding

Frequently asked questions

The On/Off switch is located on the left hand side cover.

The footrest can be manually folded on the Standard model. For the Plus model, use the footrest lever to adjust the height. The footrest can also be offset if necessary.

The stairlift should be plugged in to a mains power supply socket. The lift needs to be plugged in and switched on at all times. When the power is on, a green indicator light will be shown on the power supply.

Make sure the area covered by the movement of the stairlift is free of obstructions, then fold down the footrest, swivel the seat into correct travel position and run the stairlift up and down the track while checking for clearance.
Preparing document for printing…
0%