null  null
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=172 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.880000 mm
Printer/Scanner Unit Type 3045 Operating Instructions Printer Reference
Printer/Scanner Unit Type 3045 Operating Instructions Printer Reference
Printed in Japan
EN USA B783-7512
Printer/Scanner Unit Type
3045
Operating Instructions
Printer Reference
1
Getting Started
2
Preparing the Machine
3
Setting Up the Printer Driver
4
Other Print Operations
5
Printer Features
6
Using the Document Server
7
The Functions and Settings of the Machine
8
Appendix
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the
Safety Information in the "General Settings Guide" before using the machine.
B7837512
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=172 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.880000 mm
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Note to users in the United States of America
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio /TV technician for help.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
Caution:
Trademarks
Microsoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Adobe®, PostScript®, Acrobat®, PageMaker® and Adobe Type Manager are registered trademarks of
Adobe Systems Incorporated.
PCL® is a registered trademark of Hewlett-Packard Company.
Apple, AppleTalk, EtherTalk, Macintosh, Mac OS and True Type are registered trademarks of Apple
Computer, Inc.
Rendezvous is a trademark of Apple Computer Inc.
IPS-PRINT™ Printer Language Emulation Copyright© 2000, Oak Technology, Inc., All Rights Reserved.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through
X/Open Company Limited.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks
by Ricoh Company, Ltd. is under license.
NetWare is a registered trademark of Novell, Inc.
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
The proper names of the Windows operating systems are as follows:
• The product name of Windows® 95 is Microsoft® Windows® 95
• The product name of Windows® 98 is Microsoft® Windows® 98
• The product name of Windows® Me is Microsoft® Windows® Millennium Edition (Windows Me)
• The product name of Windows® 2000 are as follows:
Microsoft® Windows® 2000 Professional
Microsoft® Windows® 2000 Server
Microsoft® Windows® 2000 Advanced Server
• The product name of Windows® XP are as follows:
Microsoft® Windows® XP Home Edition
Microsoft® Windows® XP Professional
• The product names of Windows Server™ 2003 are as follows:
Microsoft® Windows Server™ 2003 Standard Edition
Microsoft® Windows Server™ 2003 Enterprise Edition
Microsoft® Windows Server™ 2003 Web Edition
• The product name of Windows NT® 4.0 are as follows:
Microsoft® Windows NT® Workstation 4.0
Microsoft® Windows NT® Server 4.0
Notes
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Depending on which country you are in, your machine may include certain options as standard. For
details, please contact your local dealer.
Declaration of Conformity
Product Name: Printer/Scanner Controller
Model Number: Printer/Scanner Unit Type 3045
Responsible party: Ricoh Corporation
Address: 5 Dedrick Place, West Caldwell, NJ 07006
Telephone number: 973-882-2000
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired operation.
1. Properly shielded and grounded cables and connectors must be used for connections to a host
computer (and/or peripheral) in order to meet FCC emission limits.
2. An AC adapter with a ferrite core must be used for RF interference suppression.
Note to users in Canada
Note:
This Class B digital apparatus complies with Canadian ICES-003.
Remarque concernant les utilisateurs au Canada
Avertissement:
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Copyright © 2005
AdonisC4EN-Printer-F1_FM_forPaper.book Page i Friday, May 13, 2005 6:00 PM
TABLE OF CONTENTS
Manuals for This Machine ..................................................................................... 1
How to Read This Manual ..................................................................................... 3
1. Getting Started
Control Panel.......................................................................................................... 5
Display Panel .............................................................................................................6
User Authentication............................................................................................... 8
User Code Authentication (Using the Control Panel).................................................8
User Code Authentication (Using a Printer Driver) ....................................................8
Login (Using the Control Panel) .................................................................................8
Logoff (Using the Control Panel)................................................................................9
Login (Using a Printer Driver).....................................................................................9
Connecting the Machine .....................................................................................10
Requirements...........................................................................................................10
Connecting the Machine to the Host Using a USB Cable ........................................10
Connecting the Machine to the Host Using the Parallel Cable
/ IEEE 1394 (SCSI print) Cable.............................................................................11
Connecting to the Ethernet Interface .......................................................................12
Setting Paper on the Bypass Tray...................................................................... 13
Setting Custom Size Paper ......................................................................................15
Setting Thick Paper or OHP Transparencies ...........................................................16
2. Preparing the Machine
Quick Install..........................................................................................................17
Confirming the Connection Method...................................................................19
Network Connection.................................................................................................19
Local Connection .....................................................................................................22
Using the SmartDeviceMonitor for Client Port..................................................23
Installing SmartDeviceMonitor for Client ..................................................................23
Installing the PCL or RPCS Printer Driver (TCP/IP).................................................24
Installing the PCL or RPCS Printer Driver (IPP) ......................................................26
Changing the Port Settings for SmartDeviceMonitor for Client ................................28
Using the Standard TCP/IP Port .........................................................................29
Installing the PCL or RPCS Printer Driver................................................................29
Using the LPR Port ..............................................................................................31
Installing the PCL or RPCS Printer Driver................................................................31
Using as a Windows Network Printer ................................................................33
Installing the PCL or RPCS Printer Driver................................................................33
Using as a NetWare Print Server / Remote Printer ...........................................35
Form Feed................................................................................................................37
Banner Page ............................................................................................................37
Printing after Resetting the Printer ...........................................................................37
Installing the Printer Driver Using USB ............................................................. 38
Windows 98 SE / Me - USB .....................................................................................38
Windows 2000 - USB ...............................................................................................40
Windows XP, Windows Server 2003 - USB .............................................................41
Troubleshooting for Using USB................................................................................43
i
AdonisC4EN-Printer-F1_FM_forPaper.book Page ii Friday, May 13, 2005 6:00 PM
Printing with Parallel Connection.......................................................................44
Installing the PCL or RPCS Printer Driver................................................................44
Installing the Printer Driver Using IEEE 1394 (SCSI print)............................... 46
Windows 2000..........................................................................................................46
Windows XP, Windows Server 2003........................................................................48
Printing with Bluetooth Connection...................................................................50
Supported Profiles....................................................................................................50
Printing with Bluetooth Connection ..........................................................................50
If a Message Appears during Installation .......................................................... 53
Making Option Settings for the Printer .............................................................. 54
Conditions for Bidirectional Communication ............................................................54
If Bidirectional Communication Is Disabled..............................................................56
Installing Font Manager 2000.............................................................................. 57
Using Adobe PageMaker Version 6.0, 6.5, or 7.0 ..............................................58
3. Setting Up the Printer Driver
PCL - Accessing the Printer Properties............................................................. 59
Windows 95 / 98 / Me - Accessing the Printer Properties ........................................59
Windows 2000 - Accessing the Printer Properties ...................................................60
Windows XP, Windows Server 2003 - Accessing the Printer Properties .................62
Windows NT 4.0 - Accessing the Printer Properties ................................................64
RPCS - Accessing the Printer Properties .......................................................... 66
Windows 95 / 98 / Me - Accessing the Printer Properties ........................................66
Windows 2000 - Accessing the Printer Properties ...................................................68
Windows XP, Windows Server 2003 - Accessing the Printer Properties .................70
Windows NT 4.0 - Accessing the Printer Properties ................................................72
4. Other Print Operations
Printing a PDF File Directly.................................................................................75
Printing Method ........................................................................................................75
Unauthorized Copy Control ................................................................................76
Using [Data security for copying] .................................................................................76
Using [Mask type:] .....................................................................................................78
Important Notice.......................................................................................................79
Using the Print Job List....................................................................................... 80
Selecting the Initial Print Job List .............................................................................80
Displaying a Print Job List........................................................................................81
Sample Print .........................................................................................................84
Printing a Sample Print File......................................................................................84
Deleting Sample Print Files......................................................................................86
Locked Print .........................................................................................................87
Printing a Locked Print File ......................................................................................87
Deleting Locked Print Files ......................................................................................89
Hold Print..............................................................................................................90
Printing a Hold Print File ..........................................................................................90
Deleting Hold Print Files...........................................................................................92
Stored Print ..........................................................................................................93
Printing a Stored Print File .......................................................................................93
Deleting Stored Print Files .......................................................................................95
ii
AdonisC4EN-Printer-F1_FM_forPaper.book Page iii Friday, May 13, 2005 6:00 PM
Printing from List Per User ID.............................................................................96
Printing the Desired Print Job ..................................................................................96
Printing All Print Jobs ...............................................................................................97
Spool Printing ......................................................................................................99
Form Feed...........................................................................................................100
Print Using a Selected Tray ...................................................................................100
Canceling Form Feed.............................................................................................101
Canceling a Print Job ........................................................................................102
Windows - Canceling a Print Job ...........................................................................102
Checking the Error Log ..................................................................................... 104
Covers.................................................................................................................106
Slip Sheet............................................................................................................109
Chaptering .......................................................................................................... 111
User Defined Pages ...........................................................................................113
Collate .................................................................................................................114
Printing with the Finisher..................................................................................116
Staple .....................................................................................................................117
Punch .....................................................................................................................120
5. Printer Features
Printer Features Menu .......................................................................................123
Adjusting Printer Features................................................................................ 125
Printer Features Parameters............................................................................. 126
List / Test Print .......................................................................................................126
Maintenance...........................................................................................................128
System ...................................................................................................................128
Host Interface.........................................................................................................132
PCL Menu ..............................................................................................................132
PS Menu ................................................................................................................134
PDF Menu ..............................................................................................................134
6. Using the Document Server
Accessing the Document Server......................................................................135
7. The Functions and Settings of the Machine
Mainframe ...........................................................................................................137
Functions................................................................................................................137
Interface .................................................................................................................137
List of the Setting Items ....................................................................................138
Web Image Monitor................................................................................................138
telnet ......................................................................................................................140
UNIX....................................................................................................................... 141
Settings that can be used with PostScript 3........................................................... 142
iii
AdonisC4EN-Printer-F1_FM_forPaper.book Page iv Friday, May 13, 2005 6:00 PM
8. Appendix
Software and Utilities Included on the CD-ROM .............................................143
Printer Drivers for This Printer................................................................................144
SmartDeviceMonitor for Admin ..............................................................................146
SmartDeviceMonitor for Client ............................................................................... 147
Troubleshooting................................................................................................. 149
Error & Status Messages on the Display Panel .....................................................149
The Machine Does Not Print .................................................................................. 151
Other Printing Problems......................................................................................... 154
System Settings (Parallel Connection) ............................................................ 159
Precautions when using Windows Server 2003.............................................. 160
Precautions When Using the Terminal Server Mode ............................................. 160
Specifications.....................................................................................................161
Options...................................................................................................................162
INDEX....................................................................................................... 165
iv
AdonisC4EN-Printer-F1_FM_forPaper.book Page 1 Friday, May 13, 2005 6:00 PM
Manuals for This Machine
The following manuals describe the operational procedures of this machine. For
particular functions, see the relevant parts of the manual.
Note
❒ Manuals provided are specific to machine type.
❒ Adobe Acrobat Reader/Adobe Reader is necessary to view the manuals as a
PDF file.
❒ Two CD-ROMs are provided:
• CD-ROM 1 “Operating Instructions”
• CD-ROM 2 “Scanner Driver and Document Management Utility”
❖ General Settings Guide
Provides an overview of the machine and describes System Settings(such as
Tray Paper Settings), Document Server functions and troubleshooting.
Refer to this manual for Address Book procedures such as registering fax
numbers, e-mail addresses, and user codes.
❖ Security Reference
This manual is for administrators of this machine. It describes security functions that the administrators can use to protect data from being tampered, or
prevent the machine from unauthorized use. Also refer to this manual for the
procedures for registering administrators, as well as setting user and administrator authentication.
❖ Network Guide (PDF file - CD-ROM1)
Provides information about configuring and operating the printer in a network environment or using software. This manual covers all models, and
therefore contains functions and settings that may not be available for your
model.
Images, illustrations, functions, and supported operating systems may differ
from those of your model.
❖ Copy Reference
Describes operations, functions, and troubleshooting for the machine's copier
function.
❖ Facsimile Reference <Basic Features>
Describes operations, functions, and troubleshooting for the machine's facsimile function.
❖ Facsimile Reference <Advanced Features>
Describes advanced facsimile functions such as line settings and procedures
for registering IDs.
❖ Printer Reference (this manual)
Describes system settings, operations, functions, and troubleshooting for the
machine’s printer function.
1
AdonisC4EN-Printer-F1_FM_forPaper.book Page 2 Friday, May 13, 2005 6:00 PM
❖ Scanner Reference (PDF file - CD-ROM1)
Describes operations, functions, and troubleshooting for the machine’s scanner function.
❖ Manuals for DeskTopBinder Lite
DeskTopBinder Lite is a utility included on the CD-ROM labeled “Scanner
Driver and Document Management Utility”.
• DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2)
Describes installation of, and the operating environment for DeskTopBinder Lite in detail. This guide can be displayed from the [Setup] dialog
box when DeskTopBinder Lite is installed.
• DeskTopBinder Introduction Guide (PDF file - CD-ROM2)
Describes operations of DeskTopBinder Lite and provides an overview of
its functions. This guide is added to the [Start] menu when DeskTopBinder
Lite is installed.
• Auto Document Link Guide (PDF file - CD-ROM2)
Describes operations and functions of installed with DeskTopBinder Auto
Document LinkLite. This guide is added to the [Start] menu when DeskTopBinder Lite is installed.
❖ Other manuals
• PostScript 3 Supplement (PDF file - CD-ROM1)
• UNIX Supplement (available from an authorized dealer, or as a PDF file on
our Web site)
2
AdonisC4EN-Printer-F1_FM_forPaper.book Page 3 Friday, May 13, 2005 6:00 PM
How to Read This Manual
Symbols
In this manual, the following symbols are used:
R WARNING:
This symbol indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.
R CAUTION:
This symbol indicates a potentially hazardous situation which, if instructions
are not followed, may result in minor or moderate injury, or damage to property.
* The statements above are notes for your safety.
Important
If this instruction is not followed, paper might misfeed, originals might be damaged, or data might be lost. Be sure to read this.
Preparation
This symbol indicates prior knowledge or preparation is required before operation.
Note
This symbol indicates precautions for operation, or actions to take after mal-operation.
Limitation
This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.
Reference
This symbol indicates a reference.
[
]
Keys and buttons that appear on the computer's display.
Keys that appear on the machine's display panel.
{
}
Keys built into the machine's control panel.
Keys on the computer's keyboard.
3
AdonisC4EN-Printer-F1_FM_forPaper.book Page 4 Friday, May 13, 2005 6:00 PM
4
AdonisC4EN-Printer-F1_FM_forPaper.book Page 5 Friday, May 13, 2005 6:00 PM
1. Getting Started
Control Panel
AJM009S
1. Indicators
5. Main power indicator
Display errors and machine status.
d: Add Staple indicator
D: Add Toner indicator
B: Load Paper indicator
L: Service Call indicator
M: Open Cover indicator
x: Misfeed indicator
See “Control Panel”, General Settings
Guide.
This indicator lights when the main power switch is turned on.
2. {User Tools/Counter} key
Important
❒ Do not turn off the main power
switch while the On indicator is lit
or blinking. Doing so may damage
the hard disk.
6. On indicator
This indicator lights when the operation
switch is turned on.
• User Tools
Press to change default settings and
conditions to your requirements.
• Counter
Press to display or print the total
number of copies made.
7. Operation switch
3. Display panel
• Press to cancel the entered data.
• Press to stop printing if the Printer
screen is displayed.
Displays operation status, error messages, and function menus. See p.6 “Display
Panel”.
4. {Energy Saver} key
Press to turn the power on (the On indicator goes on). Press again to turn the
power off (the On indicator goes off).
8. {Clear/Stop} key
9. {# (Enter)} key
Press after entering a value.
Press to switch to the Energy Saver mode.
Note
❒ This key is ineffective during System
Settings (User Tools) operations.
5
AdonisC4EN-Printer-F1_FM_forPaper.book Page 6 Friday, May 13, 2005 6:00 PM
Getting Started
10. Number keys
12. Function status indicators
Press to enter a value for various settings.
These show the status of the above functions:
11. Function keys
Press to switch between the “Copy”,
“Document Server”, “Fax”, Printer”, and
“Scanner” screens.
The indicator for the selected function
lights.
1
• Green: the function is active.
• Red: the function has been interrupted.
13. m: Data In indicator
The Data In indicator shows the status of
data reception from a computer.
• This indicator blinks when data is being received.
• This indicator lights when there is
data remaining to be printed.
Display Panel
This section describes configuration using the display panel when the printer
function is selected.
Important
❒ The machine switches to offline when you make settings when the machine
is online. After you complete the setting, the machine switches to online automatically.
❒ If you make a setting when the machine is offline, it will stay offline afterward.
❒ The function items displayed serve as selector keys. You can select or specify
an item by pressing it lightly.
❒ When you select or specify an item on the display panel, it becomes highlighted.
❒ Keys dimmed (for example,
) cannot be used.
AJM010S
6
1. Operational status or messages
2. [fOnline] / [ Offline]
Displays current machine status, such as
“Ready”, “Offline”, and “Printing...”. Information about the print job (user ID
and document name) appears in this section.
When you press these keys, the machine
switches between online and offline.
When the machine is online, it can receive data from the computer.
When the machine is offline, it cannot receive data from the computer.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 7 Friday, May 13, 2005 6:00 PM
Control Panel
3. [Form Feed]
5. [Print Jobs]
Press to print all the data left in the machine's input buffer.
Press to display print jobs sent from a
computer.
Note
❒ When the machine is online, the status
appears dimly.
❒ This function is not available with the
RPCS printer language.
4. [Job Reset]
Press to cancel the current print job.
If you press it when the machine is offline
and Hex Dump is selected, Hex Dump is
canceled.
6. [Error Log]
1
Press to display the error logs of print
jobs that sent from a computer.
7. [Spooling Job List]
Press to display spooled jobs.
8. Paper Tray Status indicators
The paper tray settings appear.
Note
❒ When the power is turned on, the copier display is shown. This is a factory
default. This initial setting can be changed. See “User Tools (System Settings)”, General Settings Guide.
7
AdonisC4EN-Printer-F1_FM_forPaper.book Page 8 Friday, May 13, 2005 6:00 PM
Getting Started
User Authentication
When user authentication (User Code
Authentication, Basic Authentication,
Windows Authentication, LDAP Authentication, or Integration Server Authentication) is set, the authentication
screen is displayed. Unless a valid user
name and password are entered, operations are not possible with the machine. Log on to operate the machine,
and log off when you are finished operations. Be sure to log off to prevent
unauthorized users from using the
machine.
1
Note
❒ Consult the User Administrator
about your login user name, password, and user code. For details
about the various types of user authentication, consult the appropriate administrators.
User Code Authentication
(Using a Printer Driver)
When user authentication is set, specify the user code in the printer properties of a printer driver. For details,
see the printer driver Help.
Login (Using the Control
Panel)
Follow the procedure below to log in
when Basic Authentication, Windows
Authentication, LDAP Authentication, or Integration Server Authentication is set.
A Press [Enter] for [Login User Name].
❒ For user code authentication, enter
a number that is registered in the
Address Book as a login user name
as the user code.
User Code Authentication
(Using the Control Panel)
When user authentication is set, the
following screen appears.
B Enter a login user name, and then
press [OK].
C Press [Enter] for [Login Password].
D Enter a login password, and then
press [OK].
E Press [Login].
When the user is authenticated, the
screen for the function you are using appears.
Enter a user code (eight digit), and
then press [#].
8
AdonisC4EN-Printer-F1_FM_forPaper.book Page 9 Friday, May 13, 2005 6:00 PM
User Authentication
Logoff (Using the Control
Panel)
Follow the procedure below to log off
when Basic Authentication, Windows
Authentication, LDAP Authentication, or Integration Server Authentication is set.
A Press the {User Tools/Counter} key.
B Press [→ Logout].
Login (Using a Printer Driver)
When Basic Authentication, Windows Authentication, LDAP Authenti c a t i on , o r I n t e g r a t i o n S e r v e r
Authenticationis set, make encryption settings in the printer properties
of a printer driver, and then specify a
login user name and password. For
details, see the printer driver Help.
1
Note
❒ When logged on using a printer
driver, logging off is not required.
C Press [Yes].
D Press the {User Tools/Counter} key.
9
AdonisC4EN-Printer-F1_FM_forPaper.book Page 10 Friday, May 13, 2005 6:00 PM
Getting Started
Connecting the Machine
Reference
For information about connection
using Ethernet and wireless LAN,
see “Confirming the Connection”,
Network Guide.
1
A Connect the USB 2.0 interface cable to the USB port.
For information about connection
using Bluetooth, see the manual
that comes with the optional Bluetooth interface unit.
Requirements
Before using this machine, make sure
all environmental and electrical requirements are met. Connect the machine to the host computer using the
parallel cable, network interface unit,
or both.
Make sure all cables, connectors, and
electrical outlets necessary to attach
the machine to the host computer or
network are at hand.
Connecting the Machine to the
Host Using a USB Cable
You can connect the machine to the
host computer using a USB interface
cable.
This machine does not come with a
USB interface cable. Make sure you
purchase the appropriate cable for the
machine and your computer.
Follow the procedure to connect the
machine to the host computer using a
USB interface cable.
10
AJL003S
B Connect the other end to the USB
port on the host computer.
Note
❒ The USB 2.0 interface board is
supported by Windows 98 SE /
Me / 2000 / XP, Windows Server
2003, Mac OS X v10.3.3 or higher.
• For Windows 98 SE / Me:
Make sure to install “USB
Printing Support”. If USB 2.0
is used with Windows 98 SE
/ Me, only a speed equal to
that of USB 1.1 is possible.
• For Mac OS:
To use Macintosh, the machine must be equipped with
the optional PostScript 3
unit. If USB 2.0 is used with
Mac OS X v10.3.3 or higher, a
transfer speed of USB 2.0 is
supported.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 11 Friday, May 13, 2005 6:00 PM
Connecting the Machine
Connecting the Machine to the
Host Using the Parallel Cable /
IEEE 1394 (SCSI print) Cable
Connect the machine to the host computer using the optional parallel
board or the optional IEEE 1394 interface board. This machine does not
come with a parallel cable to connect
the machine to the host computer.
The machine's parallel interface is a
standard bidirectional interface. It requires a standard IEEE 1284 compliant 36-pin parallel cable and a parallel
port on the host computer. Make sure
you purchase the appropriate cable
for the machine and your computer.
Note
❒ Do not use a parallel cable that is
longer than 3 meters (10 feet).
❒ Rating voltage of the interface connector: Max. DC 5V
Follow the procedure to connect the
machine to the host computer using a
parallel cable or IEEE 1394 interface
cable.
Important
❒ Before connecting the machine and
a computer using an interface cable, make sure the machine is not
operating, and then turn off the
main power switches of the machine and computer.
❒ Be sure to use a specified interface
cable. Other cables may cause radio interference.
A Turn off the main power switches
of the machine and computer.
Important
❒ Before turning off the main power switch, see “Turning Off the
Power”, General Settings Guide.
1
B Plug the cable into the connector
on the machine’s interface.
❖ Parallel Connection
AJL004S
❖ IEEE 1394 (SCSI print) Connection
AJL005S
C Plug the other end of the cable into
the connector on the computer’s
interface.
D Turn on the machine's main power switch.
11
AdonisC4EN-Printer-F1_FM_forPaper.book Page 12 Friday, May 13, 2005 6:00 PM
Getting Started
E Turn on the computer.
B Turn off the main power switch.
Note
❒ When using Windows 95 / 98 / Me
/ 2000 / XP and Windows Server
2003, a printer driver installation
screen might appear when the
computer is turned on. If this happens, click [Cancel] on the screen.
For more information, see p.17
“Preparing the Machine”.
The machine and computer are
now connected. The printer driver
must be installed next. For information about how to install the
printer driver, see p.17 “Preparing
the Machine”.
1
Important
❒ Make sure the main power is off.
See “Turning On the Power”,
General Settings Guide.
C Connect the Ethernet cable to the
10 BASE-T / 100 BASE-TX port.
AJL019S
Connecting to the Ethernet
Interface
D Turn on the main power switch.
The network interface board supports
10 BASE-T or 100 BASE-TX connections.
Important
❒ Before making the connection,
touch the metallic part to ground
yourself.
A Attach the supplied ferrite core to
the end of the Ethernet cable.
AJM005S
1. Indicator (green)
Remains green when the machine is
properly connected to the network.
2. Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
AJL014S
12
AdonisC4EN-Printer-F1_FM_forPaper.book Page 13 Friday, May 13, 2005 6:00 PM
Setting Paper on the Bypass Tray
Setting Paper on the Bypass Tray
This section gives instructions for setting paper on the bypass tray. Use the
bypass tray to print onto OHP transparencies, labels, thick paper, and envelopes that cannot be loaded in the
paper tray.
Important
❒ The following functions are disabled when printing from the bypass tray:
• Duplex printing
• Auto Tray Select
• Auto Tray Switching
• Rotating Collate
• Staple (when the optional unit is
installed)
• Punch (when the optional unit
is installed)
❒ When printing using the printer
function, original images are always rotated by 180 degrees (the
orientation of images to be printed
is opposite to that of the copier
function). When printing onto paper with specific orientation requirements, such as envelopes and
letterheads, make sure to rotate the
paper feed orientation to 180 degrees.
Reference
For details about setting paper in
the regular paper tray, see General
Settings Guide.
1
When loading custom size paper,
see p.15 “Setting Custom Size Paper”.
When loading OHP transparencies
or thick paper (over 127.9 g/m2),
set paper size and paper type. For
details, see p.16 “Setting Thick Paper or OHP Transparencies”.
When loading letterhead paper,
pay attention to its orientation. See
“Orientation-Fixed Paper or TwoSided Paper”, General Settings
Guide.
Note
❒ Paper within the following dimensions can be set in the bypass tray:
• Vertical: 100 - 297 mm
(3.94 - 11.69 in.)
• Horizontal: 148 - 600 mm
(5.83 - 23.62 in.)
❒ Be sure to set the paper with the
side you want to print facing down
in the bypass tray.
❒ The number of sheets that can be
loaded in the bypass tray depends
on the paper type.
❒ Paper sizes fed from the bypass
tray are output first sheet down,
print side-up.
13
AdonisC4EN-Printer-F1_FM_forPaper.book Page 14 Friday, May 13, 2005 6:00 PM
Getting Started
A Open the bypass tray.
C Gently insert paper face up into
the bypass tray until the beeper
sounds.
1
AJL006S
B Adjust the paper guides to the pa-
per size.
Open out the extender to support
paper sizes larger than A4 L, 81/2
×11 L.
Important
❒ If the paper guides are not flush
against the paper, skewing and
misfeeds might occur.
AJL007S
1. Extender
2. Paper guides
14
Note
❒ The beeper will not sound if it is
turned off. Gently insert paper
until it stops.
❒ Do not stack paper over the limit mark, otherwise a skewed image or misfeeds might occur.
❒ Fan the paper to get air between
the sheets to avoid a multi-sheet
feed.
D Select the paper size.
Note
❒ The following procedures are
not required if you select [Driver
/ Command] from [Bypass Tray
Setting Priority] in [System] of
[Printer Features] (see p.128 “System”). In that case, set the paper
size using the printer driver.
❒ If you select [Machine Settings]
from [Bypass Tray Setting Priority]
in [System] of [Printer Features]
(see p.128 “System”), the settings made using the control
panel have priority over the
printer driver settings.
❒ If the printer driver is not used,
select [Machine Settings] from
[Bypass Tray Setting Priority] in
[System] of [Printer Features] (see
p.128 “System”). Set paper size
using the control panel.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 15 Friday, May 13, 2005 6:00 PM
Setting Paper on the Bypass Tray
Reference
For printer driver settings, see
the printer driver Help.
A Press the {User Tools/Counter} key
on the control panel.
ZCAS100N
B Press [System Settings].
C Press the [Tray Paper Settings] tab.
D Press [TNext] to scroll through
the list.
E Press [Printer Bypass Paper Size].
F Select the paper size.
Note
❒ Press [UPrevious] or [TNext]
to scroll through the list.
❒ When loading thick paper or
OHP transparencies, select
paper size and paper type.
For details, see p.16 “Setting
Thick Paper or OHP Transparencies”.
G Press [OK].
H Press the {User Tools/Counter} key.
Setting Custom Size Paper
Note
❒ The following procedures are not
required if you select [Driver / Command] from [Bypass Tray Setting Priority] in [System] of [Printer Features]
(see p.128 “System”). In that case,
set the paper size using the printer
driver.
❒ If you select [Machine Settings] from
[Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128
“System”), the settings made using
the control panel have priority
over the printer driver settings.
❒ If the printer driver is not used, select [Machine Settings] from [Bypass
Tray Setting Priority] in [System] of
[Printer Features] (see p.128 “System””). Set paper size using the
control panel.
1
Reference
For printer driver settings, see the
printer driver Help.
A Press the {User Tools/Counter} key
on the control panel.
B Press [System Settings].
C Press the [Tray Paper Settings] tab.
D Press [TNext] to scroll through the
list.
E Press [Printer Bypass Paper Size].
F Press [Custom Size].
If a custom size is already set, press
[Change Size].
G Press [Vertical].
15
AdonisC4EN-Printer-F1_FM_forPaper.book Page 16 Friday, May 13, 2005 6:00 PM
Getting Started
H Enter the vertical size of the paper
using the number keys, and then
press [#].
1
I Press [Horizontal].
J Enter the horizontal
size of the
paper using the number keys, and
then press [#].
K Press [OK].
The paper sizes entered are displayed.
L Press [OK].
M Press the {User Tools/Counter} key.
❒ Thick paper and OHP transparencies are delivered face up on the
top of the preceding page; therefore, the prints need to be rearranged into the correct order. To
avoid this, select [Reverse order
print] in the RPCS printer driver
settings to deliver the prints in the
correct page order.
Reference
For printer driver settings, see
Printer Driver Help.
A Press the {User Tools/Counter} key
on the control panel.
B Press [System Settings].
C Press the [Tray Paper Settings] tab.
D Press [TNext] to scroll through the
list.
E Press [Paper Type: Bypass tray].
Setting Thick Paper or OHP
Transparencies
Note
❒ The following procedures are not
required if you select [Driver / Command] from [Bypass Tray Setting Priority] in [System] of [Printer Features]
(see p.128 “System”). In that case,
set the paper size using the printer
driver.
❒ If you select [Machine Settings] from
[Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128
“System”), the settings made using
the control panel have priority
over the printer driver settings.
❒ If the printer driver is not used, select [Machine Settings] from [Bypass
Tray Setting Priority] in [System] of
[Printer Features] (see p.128 “System”). Set the paper size using the
control panel.
16
F Select [OHP] or [Thick Paper].
G Press [OK].
The paper type selected is displayed.
H Press the {User Tools/Counter} key.
Note
❒ The settings made will remain
valid until they are reset again.
After printing on OHP transparencies or thick paper, make
sure to clear settings for the next
user.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 17 Friday, May 13, 2005 6:00 PM
2. Preparing the Machine
Quick Install
Windows 95 / 98 / Me / 2000 / XP, Windows Server 2003, and Windows NT 4.0
users can easily install this software using the CD-ROM provided.
Using Quick Install, the PCL printer driver and/or RPCS printer driver and
SmartDeviceMonitor for Client is installed under network environment, and
TCP/IP port will be set.
Important
❒ To install printer driver under Windows 2000 / XP Professional, Windows
Server 2003, and Windows NT 4.0, you must have an account that has Manage Printers permission. Log on as an Administrator.
❒ If you connect using USB, refer to p.38 “Installing the Printer Driver Using
USB” and install the printer driver.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [Quick Install].
The software license agreement appears in the [License Agreement] dialog box.
E After reading the agreement, click [I accept the agreement.], and then click
[Next >].
F Select the machine model you want to use in the [Select Printer] dialog box.
For network connection via TCP/IP, select the machine whose IP address is
displayed in [Connect To].
For parallel connection, select the machine whose printer port is displayed in
[Connect To].
G Click [Install].
The printer driver installation starts.
H Click [Finish].
A message about restarting the computer may appear. Restart the computer
to complete installation.
17
AdonisC4EN-Printer-F1_FM_forPaper.book Page 18 Friday, May 13, 2005 6:00 PM
Preparing the Machine
I Click [Exit] in the first dialog box of the installer, and then take out the CDROM.
Note
❒ To stop installation of the selected software, click [Cancel] before installation is complete.
❒ Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
❒ Select a machine to whose IP address is displayed in [Connect To] to install
SmartDeviceMonitor for Client when using TCP/IP.
2
Reference
Quick Install is not available unless bidirectional communication between
the machine and computer is enabled via parallel connection. See p.56 “If
Bidirectional Communication Is Disabled” for details about bidirectional
communication between the machine and computer.
18
AdonisC4EN-Printer-F1_FM_forPaper.book Page 19 Friday, May 13, 2005 6:00 PM
Confirming the Connection Method
Confirming the Connection Method
This machine supports network and local connection.
Before installing the printer driver, check how the machine is connected. Follow
the driver installation procedure that is appropriate to the connection method.
2
Network Connection
This machine can be used as a Windows printing port or network printer.
Using This Machine as the Windows Printing port
Network connections can be established through Ethernet, IEEE 802.11b, and
IEEE 1394 (IP over 1394).
Available ports are determined based on the combination of Windows operating
system version and connection method used.
AJO011S
❖ Windows 95 / 98
Connection Method
Available Ports
Ethernet / IEEE 802.11b
SmartDeviceMonitor for Client port
IEEE 1394 (IP over 1394)
None
❖ Windows Me
Connection Method
Available Ports
Ethernet / IEEE 802.11b
SmartDeviceMonitor for Client port
IEEE 1394 (IP over 1394)
SmartDeviceMonitor for Client port
19
AdonisC4EN-Printer-F1_FM_forPaper.book Page 20 Friday, May 13, 2005 6:00 PM
Preparing the Machine
❖ Windows 2000
Connection Method
Ethernet / IEEE 802.11b
Available Ports
SmartDeviceMonitor for Client port
Standard TCP/IP
LPR port
IEEE 1394 (IP over 1394)
2
None
❖ Windows XP
Connection Method
Available Ports
Ethernet / IEEE 802.11b
SmartDeviceMonitor for Client port
Standard TCP/IP
LPR port
IEEE 1394 (IP over 1394)
SmartDeviceMonitor for Client port
Standard TCP/IP
❖ Windows Server 2003
Connection Method
Ethernet / IEEE 802.11b
Available Ports
SmartDeviceMonitor for Client port
Standard TCP/IP
LPR port
IEEE 1394 (IP over 1394)
SmartDeviceMonitor for Client port
Standard TCP/IP
❖ Windows NT 4.0
Connection Method
Ethernet / IEEE 802.11b
Available Ports
SmartDeviceMonitor for Client port
LPR port
IEEE 1394 (IP over 1394)
None
Reference
See the explanation of how to install the printer driver for each type of port.
For the SmartDeviceMonitor for Client port, see p.23 “Using the SmartDeviceMonitor for Client Port”.
For the Standard TCP/IP port, see p.29 “Using the Standard TCP/IP Port”.
For the LPR port, see p.31 “Using the LPR Port”.
20
AdonisC4EN-Printer-F1_FM_forPaper.book Page 21 Friday, May 13, 2005 6:00 PM
Confirming the Connection Method
Using as a network printer
This machine can be used as the Windows network printer, the NetWare print
server, or the NetWare remote printer.
2
ZZZ003S
Reference
See the explanation of how to install the printer driver for each type of network printer.
For the Windows network printer, see p.33 “Using as a Windows Network
Printer”.
For the NetWare print server and remote printer, see p.35 “Using as a NetWare Print Server / Remote Printer”.
21
AdonisC4EN-Printer-F1_FM_forPaper.book Page 22 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Local Connection
Local connections can be established via parallel, USB, IEEE 1394 (SCSI print),
and Bluetooth connections.
Windows operating system version determines the available connection methods.
• Windows 95:
• Parallel connections
• Windows 98:
• Parallel connections
• Windows 98 SE / Me:
• USB and Parallel connections
• Windows 2000:
• USB, Parallel, IEEE 1394 (SCSI print), and Bluetooth connections
• Windows XP:
• USB, Parallel, IEEE 1394 (SCSI print), and Bluetooth connections
• Windows Server 2003:
• USB, Parallel, IEEE 1394 (SCSI print), and Bluetooth connections
• Windows NT 4.0:
• Parallel connections
2
Reference
See the explanation of how to install the printer driver for each method of
connection.
For the USB connection, see p.38 “Installing the Printer Driver Using USB”.
For the parallel connection, see p.44 “Printing with Parallel Connection”.
For the IEEE 1394 (SCSI print) connection, see p.46 “Installing the Printer
Driver Using IEEE 1394 (SCSI print)”.
For the Bluetooth connection, see p.50 “Printing with Bluetooth Connection”.
22
AdonisC4EN-Printer-F1_FM_forPaper.book Page 23 Friday, May 13, 2005 6:00 PM
Using the SmartDeviceMonitor for Client Port
Using the SmartDeviceMonitor for Client
Port
Installing SmartDeviceMonitor for Client
2
Important
❒ To install SmartDeviceMonitor for Client under Windows 2000 / XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has Manage Printers permission. Log on as an Administrator.
❒ Install SmartDeviceMonitor for Client before installing the printer driver
when using the SmartDeviceMonitor for Client port.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [SmartDeviceMonitor for Client/Admin].
E The SmartDeviceMonitor for Client installer starts.
F The software license agreement appears in the [License Agreement] dialog
box. After reading through its contents, click [I accept the agreement.], and
then click [Next >].
G Click [SmartDeviceMonitor for Client], and then click [Next >].
The SmartDeviceMonitor for Client installer starts.
H Follow the instructions on the display to install SmartDeviceMonitor for
Client.
I Click [Finish].
If you are required to restart the computer after installing SmartDeviceMonitor for Client, restart the computer.
Note
❒ To stop installation of the selected software, click [Cancel] before installation is complete.
23
AdonisC4EN-Printer-F1_FM_forPaper.book Page 24 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Installing the PCL or RPCS Printer Driver (TCP/IP)
Important
❒ To install this printer driver under Windows 2000 / XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has
Manage Printers permission. Log on as an Administrators or Power Users
group member.
2
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [PCL/RPCS Printer Drivers].
E The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G Click [Next >].
H Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I Double-click the printer name to display the printer settings.
Note
❒ The details shown in [Comment:], [Driver:], and [Port:] vary depending on
the operating system, printer model, and port.
J Click [Port:], and then click [Add].
K Click [SmartDeviceMonitor], and then click [OK].
L Click [TCP/IP], and then click [Search].
A list of printers using TCP/IP appears.
24
AdonisC4EN-Printer-F1_FM_forPaper.book Page 25 Friday, May 13, 2005 6:00 PM
Using the SmartDeviceMonitor for Client Port
M Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a machine not listed here, click [Specify Address], and then enter the IP address
or host name of the machine.
Under Windows 95 / 98 / Me, you cannot add an IP address partially similar
to the one already used. For example, if “192.168.0.2” is in use, “192.168.0.2xx”
cannot be used. Similarly, if “192.168.0.20” is in use, “192.168.0.2” cannot be
used.
2
N Check that the port of the selected printer is displayed in [Port:].
O Set a user code, if necessary.
This allows a SmartDeviceMonitor for Admin user to display and check statistics about the number of sheets which each user prints. For details, see
SmartDeviceMonitor for Admin Help.
Up to 8 numeric characters can be entered. No alphabetic character or symbol
can be entered.
P Select the [Default Printer] check box to configure the printer as default.
Q Click [Continue].
Installation starts.
R Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, install use [Add Printer]. See p.53
“If a Message Appears during Installation”.
25
AdonisC4EN-Printer-F1_FM_forPaper.book Page 26 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Installing the PCL or RPCS Printer Driver (IPP)
Important
❒ To install printer driver under Windows 2000 / XP Professional, Windows
Server 2003, and Windows NT 4.0, you must have an account that has Manage Printers permission. For this, log on as an Administrators or Power Users
group member.
2
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case,
launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [PCL/RPCS Printer Drivers].
E The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
H Double-click the printer name to display the printer settings.
Note
❒ The details shown in [Comment:], [Driver:], and [Port:] vary depending on
the operating system, printer model, and port.
I Click [Port:], and then click [Add].
J Click [SmartDeviceMonitor], and then click [OK].
K Click [IPP].
26
AdonisC4EN-Printer-F1_FM_forPaper.book Page 27 Friday, May 13, 2005 6:00 PM
Using the SmartDeviceMonitor for Client Port
L In the [Printer URL] box, enter “http://printer's address/printer” as the printer's
address.
If the server authentication is issued, to enable SSL (a protocol for encrypted
communication), enter “https://printer's address/printer” (Internet Explorer 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter “http://printer's address/ipp” as the printer's address.
2
M Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.
N Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O Click [OK].
P Check that the port of the selected printer is displayed in [Port:].
Q Set a user code, if necessary.
This allows a SmartDeviceMonitor for Admin user to display and check the
number of sheets each user prints. For details, see SmartDeviceMonitor for
Admin Help.
Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered.
R Select the [Default Printer] check box to configure the printer as default.
S Click [Continue].
Installation starts.
T Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installation is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.53 “If a
Message Appears during Installation”.
27
AdonisC4EN-Printer-F1_FM_forPaper.book Page 28 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Changing the Port Settings for SmartDeviceMonitor for Client
Follow the procedure below to change the SmartDeviceMonitor for Client settings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
Windows 95 / 98:
A Open the [Printers] window from the [Start] menu.
B In the [Printers] window, click the icon of the printer you want to use. On
2
the [File] menu, click [Properties].
C Click the [Details] tab, and then click [Port Settings].
The [Port Settings] dialog box appears.
Windows 2000 / Windows NT 4.0:
A Open [Printers] window from [Start] menu.
B In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C On the [Ports] tab, click [Configure Port].
The [Port Settings] dialog box appears.
Windows XP, Windows Server 2003:
A Open the [Printers and Faxes] window from the [Start] menu.
The [Printers and Faxes] window appears.
B Click the icon of the machine you want to use. On the [File] menu, click
[Properties]. The printer properties appear.
C Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration] dialog box appears.
• For TCP/IP, timeout setting can be configured.
Note
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow
the procedure below.
A Click [Cancel] to close the [Port Configuration:] dialog box.
B Start SmartDeviceMonitor for Client, and then right-click the SmartDeviceMonitor for Client icon on the taskbar.
C Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each port] check box.
D Click [OK] to close the [Extended Features Settings] dialog box.
• User, proxy, and timeout settings can be configured for IPP.
28
Reference
For information about these settings, see “Using SmartDeviceMonitor for
Client”, Network Guide, or SmartDeviceMonitor for Client Help.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 29 Friday, May 13, 2005 6:00 PM
Using the Standard TCP/IP Port
Using the Standard TCP/IP Port
Installing the PCL or RPCS Printer Driver
Important
❒ To install this printer driver under Windows 2000 / XP Professional, and
Windows Server 2003, you must have an account that has Manage Printers
permission. Log on as an Administrators or Power Users group member.
2
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case,
launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [PCL/RPCS Printer Drivers].
E The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G Click [Next >].
H Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I Double-click the printer name to display the printer settings.
Note
❒ The details shown in [Comment:], [Driver:], and [Port:] vary depending on
the operating system, printer model, and port.
J Click [Port:], and then click [Add].
K Click [Standard TCP/IP Port], and then click [OK].
Configure the Standard TCP/IP port settings, and then see Windows Help if
[Standard TCP/IP Port] does not appear.
L Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
29
AdonisC4EN-Printer-F1_FM_forPaper.book Page 30 Friday, May 13, 2005 6:00 PM
Preparing the Machine
M Enter the printer name or IP address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name
if necessary.
When the device selection appears, select “RICOH NetworkPrinter Driver C
Model”.
N Click [Next >].
O Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
2
The installation start dialog box reappears.
P Check that the port of the selected printer is displayed in [Port:].
Q Configure the default printer as necessary.
R Click [Continue].
The printer driver installation starts.
S Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installation is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.53 “If a
Message Appears during Installation”.
30
AdonisC4EN-Printer-F1_FM_forPaper.book Page 31 Friday, May 13, 2005 6:00 PM
Using the LPR Port
Using the LPR Port
Installing the PCL or RPCS Printer Driver
Important
❒ To install this printer driver under Windows 2000 / XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has
Manage Printers permission. Log on as an Administrators or Power Users
group member.
2
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case,
launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [PCL/RPCS Printer Drivers].
E The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
H Click [Next >].
I Double-click the printer name to display the printer settings.
Note
❒ The details shown in [Comment:], [Driver:], and [Port:] vary depending on
the operating system, printer model, and port.
J Click [Port:], and then click [Add].
K Click [LPR Port], and then click [OK].
If [LPR Port] does not appear, see Windows Help and install it.
L Enter the printer's IP address in the [Name or address of server providing lpd] box.
31
AdonisC4EN-Printer-F1_FM_forPaper.book Page 32 Friday, May 13, 2005 6:00 PM
Preparing the Machine
M Enter “lp” in the [Name of printer or print queue on that server] box, and then click
[OK].
The port is added.
N Check that the port of the selected printer is displayed in [Port:].
O Configure the default printer as necessary.
P Click [Continue].
2
The printer driver installation starts.
Q Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.53 “If a
Message Appears during Installation”.
32
AdonisC4EN-Printer-F1_FM_forPaper.book Page 33 Friday, May 13, 2005 6:00 PM
Using as a Windows Network Printer
Using as a Windows Network Printer
Installing the PCL or RPCS Printer Driver
To use the print server, install the printer driver by selecting “Network printer
server”, and then select the Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0 shared printer.
This section assumes that the client has already been configured to communicate
with a Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0 print
server. Do not begin the following procedure before the client is set up and configured correctly.
2
Important
❒ To install the printer driver under Windows 2000 / XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has
Manage Printers permission. Log on as an Administrators or Power Users
group member.
❒ If you print with a print server connected to the printer using the SmartDeviceMonitor port, Recovery Printing and Parallel Printing cannot be used
from the client.
❒ If you print with a Windows XP or Windows Server 2003 print server, notification functions of SmartDeviceMonitor may not be used with the client.
❒ If you print with a Windows NT 4.0 print server, install the printer driver before you connect the print server to the printer.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case,
launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [PCL/RPCS Printer Drivers].
E The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G Click [Next >].
33
AdonisC4EN-Printer-F1_FM_forPaper.book Page 34 Friday, May 13, 2005 6:00 PM
Preparing the Machine
H Select the [Printer Name] check box to select the printer models you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
J Click [Port:], and then click [Add].
K Click [Network Printer], and then click [OK].
L Double-click the computer name you want to use as a print server in the
2
[Browse for Printer] window.
M Select the printer you want to use, and then click [OK].
N Check that the port of the selected printer is displayed in [Port:].
O Configure the user code as necessary.
For an RPCS printer driver, a user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
P Select the [Default Printer] check box to configure the printer as default.
Q Click [Continue].
The printer driver installation starts.
R Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.53 “If a
Message Appears during Installation”.
34
AdonisC4EN-Printer-F1_FM_forPaper.book Page 35 Friday, May 13, 2005 6:00 PM
Using as a NetWare Print Server / Remote Printer
Using as a NetWare Print Server / Remote
Printer
This explains how to set up the Windows computer used as the NetWare client.
Important
❒ To install this printer driver under Windows 2000 / XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has
Manage Printers permission. Log on as an Administrators or Power Users
group member.
The following explanation assumes NetWare Client is installed on the client
computer and the NetWare server environment is correctly set up. Install all necessary client applications before following this procedure.
Set up the printer driver while logging on to the NetWare file server.
The following values are used in the example:
• Operating system: Windows 98
• NetWare version: 4.1
• File server name: CAREE
• Queue name: R-QUEUE
2
A Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case,
launch “Setup.exe” on the CD-ROM root directory.
B Select an interface language, and then click [OK].
The default interface language is English.
C Click [PCL/RPCS Printer Drivers].
D The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
E Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
F Click [Next >].
G Select the [Printer Name] check box to select the printer model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
H Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
35
AdonisC4EN-Printer-F1_FM_forPaper.book Page 36 Friday, May 13, 2005 6:00 PM
Preparing the Machine
I Click [Port:], and then click [Add].
J Click [Network Printer], and then click [OK].
K Double-click the name of the NetWare file server on the network tree.
The created queue is displayed.
L Select the print queue, and then click [OK].
M Check that the port of the selected printer is displayed in [Port:].
N Click [Continue].
2
The printer driver installation starts.
O Click [Finish] in the [Select Program] dialog box.
P Click [Finish] in the [Installation completion.] dialog box.
Q In the [Printers] window, open the printer properties.
Under Windows XP or Windows Server 2003, open the printer properties
from the [Printers and Faxes] window.
R On the [Printer Settings] tab, clear the [Form Feed] and [Enable Banner] check boxes.
Under Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0, click
the [NetWare setting] tab.
Do not select these check boxes since they are automatically selected by the
printer driver. If you select the check boxes, the printer may not print correctly.
S Click [OK] to close the printer properties dialog box.
Note
❒ The protocol is set to inactive as default. Enable it using Web Image Monitor or Telnet.
36
AdonisC4EN-Printer-F1_FM_forPaper.book Page 37 Friday, May 13, 2005 6:00 PM
Using as a NetWare Print Server / Remote Printer
Form Feed
Do not use NetWare to configure form feed. Form feed is controlled by the printer driver on Windows. If NetWare form feed is configured, the printer may not
print properly.
Follow the procedure below to disable form feed according to the operating system used:
• Under Windows 95 / 98 / Me, clear the [Form feed] check box on the [Printer
Settings] tab in the printer properties dialog box.
• Under Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0, clear
the [Form feed] check box on the [NetWare Settings] tab in the printer properties
dialog box.
2
Banner Page
Do not use NetWare to configure a banner page.
Follow the procedure below to disable banner pages according to the operating
system used:
• Under Windows 95 / 98 / Me, clear the [Enable banner] check box on the [Printer Settings] tab in the printer properties dialog box.
• Under Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0, clear
the [Enable banner] check box on the [NetWare Settings] tab in the printer properties dialog box.
Printing after Resetting the Printer
Printer to print server connection requires 30 - 40 seconds to resume after the
printer is reset. During this period, jobs may be accepted (depending on NetWare specifications) but not printed.
To print after resetting the printer as the remote printer, check on the print server
that the remote printer is disconnected, or wait for two minutes before trying to
print.
37
AdonisC4EN-Printer-F1_FM_forPaper.book Page 38 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Installing the Printer Driver Using USB
This section explains how to install printer drivers using USB.
Before installing, check that only the operating system is running on the computer and no print jobs are in progress.
The printer drivers can be installed from the supplied CD-ROM provided with
this machine.
2
Windows 98 SE / Me - USB
Important
❒ Installation via USB is not possible under Windows 95 / 98. Upgrade to Windows 98 SE / Me.
When USB is first used, the plug and play function starts and the [New Hardware
Found], [Device Driver Wizard], or [Add New Hardware Wizard] dialog box appears, depending on the operating system.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the “USB” port is added to the [Printers] window.
A Turn off the power of the machine.
B Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
C Turn on the power of the computer.
D Click [Next >].
E Click [Search for the best driver for your device. [Recommended]], and then click
[Next >].
F Select the [Specify a location:] check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
G Insert the CD-ROM into the CD-ROM drive.
Note
❒ When Auto Run starts, click [Exit].
❒ To disable Auto Run, press the {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
H Specify the location where USB Printing Support is located, and then click
38
[Next >].
If the CD-ROM drive is D, the source files of USB Printing Support are stored
in the following location:
D:\DRIVERS\USBPRINT\WIN98ME
AdonisC4EN-Printer-F1_FM_forPaper.book Page 39 Friday, May 13, 2005 6:00 PM
Installing the Printer Driver Using USB
I Check the location, and then click [Next >].
USB Printing Support is installed.
J Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the “USB001” port is added to the [Printers]
window.
2
K Click [Next >].
L Click [Search for the best driver for your device. [Recommended]], and then click
[Next >].
M Select the [Specify a location:] check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
N Insert the CD-ROM into the CD-ROM drive.
Note
❒ When Auto Run starts, click [Exit].
❒ To disable Auto Run, press the {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
O Specify the location where the source files of the printer driver are stored,
and then click [Next >].
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• RPCS
D:\DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1
• PCL 5e
D:\DRIVERS\PCL5E\WIN9X_ME\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\WIN9X_ME\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS3\WIN9X_ME\(Language)\DISK1
P Check the location, and then click [Next >].
Add Printer Wizard starts.
39
AdonisC4EN-Printer-F1_FM_forPaper.book Page 40 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Q Click [Finish].
Installation is complete. If installation is successful, the icon of the printer
connected to the “USB001” port is added to the [Printers] window.
Note
❒ The number after “USB” varies depending on the number of printers connected.
❒ It is not necessary to reinstall USB Printing Support when connecting a different machine via USB interface when USB Printing Support is installed.
❒ After installing USB Printing Support, if the printer driver is not installed,
follow the plug-and-play instructions of the printer.
2
Windows 2000 - USB
Important
❒ Installing a printer driver requires Administrator permission. Log on using
an account that has Administrator permission.
When USB is first used, Found New Hardware Wizard starts, and USB Printing
Support is installed automatically.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the “USB” port is added to the [Printers] window.
If the printer driver is not installed, follow the plug-and-play instructions of the
printer to install it from the supplied CD-ROM.
A Turn off the power of the machine.
B Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
C Turn on the power of the computer.
D Click [Next >] in the [Found New Hardware Wizard] dialog box.
E Select the [Search for a suitable driver for my device [recommended]] check box,
and then click [Next >].
F Select the [Specify location] check box, and then click [Next >].
G Insert the CD-ROM into the CD-ROM drive.
Note
❒ When Auto Run starts, click [Exit].
❒ To disable Auto Run, press the left {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
40
AdonisC4EN-Printer-F1_FM_forPaper.book Page 41 Friday, May 13, 2005 6:00 PM
Installing the Printer Driver Using USB
H Specify the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• RPCS
D:\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1
• PCL 5e
D:\DRIVERS\PCL5E\WIN2K_XP\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\WIN2K_XP\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1
2
I Check the printer driver location, and then click [OK].
J Click [Next >].
K Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the “USB001” port is added to the [Printers]
window.
Note
❒ The number after “USB” varies depending on the number of printers connected.
Windows XP, Windows Server 2003 - USB
Important
❒ Installing a printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
When USB is first used, Found New Hardware Wizard starts, and USB Printing
Support is installed automatically.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the “USB” port is added to the [Printers] window.
The printer drivers can be installed from the supplied CD-ROM provided with
this machine.
If the printer driver is not installed, follow the plug-and-play instructions of the
printer to install it from the supplied CD-ROM.
A Turn off the power of the machine.
B Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
C Turn on the power of the computer.
41
AdonisC4EN-Printer-F1_FM_forPaper.book Page 42 Friday, May 13, 2005 6:00 PM
Preparing the Machine
D In the Found New Hardware Wizard display, click [Search for a suitable driver
for my device [recommended]], and then click [Next >].
E Insert the CD-ROM into the CD-ROM drive.
Note
❒ If Auto Run starts, click [Cancel], and then [Exit].
❒ To disable Auto Run, press the left {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
2
F Select the [Include this location in the search] check box under [Search for the best
driver in these location], and then click [Browse] to select the printer driver location.
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• RPCS
D:\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1
• PCL 5e
D:\DRIVERS\PCL5E\WIN2K_XP\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\WIN2K_XP\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1
G Check the printer driver location, and then click [Next >].
H Click [Continue].
I Click [Finish].
If installation is successful, the icon of the printer connected to the “USB001”
port is added to the [Printers] window.
Note
❒ The number after “USB” varies depending on the number of printers connected.
42
AdonisC4EN-Printer-F1_FM_forPaper.book Page 43 Friday, May 13, 2005 6:00 PM
Installing the Printer Driver Using USB
Troubleshooting for Using USB
Problems
Solutions
The machine is not automatically recognized.
Turn off the power of the machine, reconnect
the USB cable, and then turn it on again.
Windows has already configured the USB set- Open Windows' Device Manager, and then,
tings.
under [Universal Serial Bus controllers], remove
any conflicting devices. Conflicting devices
have a yellow [!] or [?] icon by them. Take care
not to accidentally remove required devices.
For details, see Windows Help.
2
Note
❒ When using Windows 2000 / XP or Windows Server 2003, an erroneous device is
displayed under [USB Controller] in the [Device Manager] dialog box.
43
AdonisC4EN-Printer-F1_FM_forPaper.book Page 44 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Printing with Parallel Connection
To use a machine connected using a parallel interface, click [LPT1] when installing the printer driver.
Installing the PCL or RPCS Printer Driver
2
Important
❒ To install this printer driver under Windows 2000 / XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has
Manage Printers permission. Log on as an Administrators or Power Users
group member.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case,
launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [PCL/RPCS Printer Drivers].
E The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G Click [Next >].
H Select the [Printer Name] check box to select the printer model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
J Check that [LPT1:] is shown in [Port:].
K Select the [Default Printer] check box to configure the printer as default.
L Click [Finish].
The printer driver installation starts.
44
AdonisC4EN-Printer-F1_FM_forPaper.book Page 45 Friday, May 13, 2005 6:00 PM
Printing with Parallel Connection
M Click [Finish] in the installation completion dialog box.
Note
❒ To stop installation of the selected software, click [Cancel] before installation is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.53 “If a
Message Appears during Installation”.
2
45
AdonisC4EN-Printer-F1_FM_forPaper.book Page 46 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Installing the Printer Driver Using IEEE 1394
(SCSI print)
The printer drivers can be installed from the supplied CD-ROM provided with
this machine.
2
Important
❒ Quit all applications currently running, and do not print during installation.
❒ Do not connect IEEE 1394 or USB devices to the computer or turn on another
printers during installation.
❒ Before uninstalling the printer driver, check that the IEEE 1394 interface cable
is disconnected from the computer.
❒ SCSI print must be set to “active” from the control panel. For details, see Network Guide.
❒ This machine can receive print data from one computer at a time only. An
message may appear if jobs from different computers collide.
❒ If jobs collide, the first received is printed first.
❒ When the printer driver is properly installed, connecting or disconnecting the
optional IEEE 1394 cable causes the printer icon to change.
Windows 2000
Note
❒ If [Found New Hardware Wizard] appears every time the computer is started or
the cable is connected, disable the device. To install another printer driver after setting the “1394_00n” port, click [1394_00] as a port during the printer
driver installation.
❒ Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
❒ The optional 1394 interface unit can be used only with Service Pack 1 (SP1) or
higher.
A Connect the machine to the computer using the IEEE 1394 interface cable.
B Click [Next >] in the [Found New Hardware Wizard] dialog box.
C When the message “This wizard will complete the installation for this Device: Unknown” appears, click [Specify a location], and then click [Next >].
D When the message “Locate Driver Files” appears, select the [Optional search
locations.] check box, and then click [Specify a location], and then click [Next >].
46
AdonisC4EN-Printer-F1_FM_forPaper.book Page 47 Friday, May 13, 2005 6:00 PM
Installing the Printer Driver Using IEEE 1394 (SCSI print)
E Insert the CD-ROM into the CD-ROM drive.
Note
❒ If Auto Run starts, click [Cancel], and then [Exit].
❒ To disable Auto Run, press the left {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
F Click [Browse].
G Select the printer driver you want to use.
2
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• RPCS
D:\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1
• PCL 5e
D:\DRIVERS\PCL5E\WIN2K_XP\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\WIN2K_XP\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1
H Click [Open].
I Click [OK].
J Follow the on-screen instructions.
When installation is complete, the printer connected to “1394_00n” appears
in the [Printers] window: (“n” shows the number of printers connected.)
Note
❒ If the printer driver has already been installed, the printer icon is added to
the [Printers] window. In this case, printer driver installation is not necessary.
❒ If printing does not work properly after the installation, delete the port and
reinstall the printer driver. For details, see p.151 “The Machine Does Not
Print”.
❒ If you do not want to install the printer when Found New Hardware Wizard starts under an operating system that supports SCSI print, disable the
device by following the procedure below.
A When the [Found New Hardware Wizard] dialog box appears, click [Next >].
B When the message “This wizard will complete the installation for this
Device: Unknown” appears, select the [Search for a suitable driver for my
device [recommended]] check box, and then click [Next >].
C When the message “Please choose your search and installation option.”
appears, clear all check boxes from [Search for the best driver in these locations.], and then click [Next >].
D When the message “Driver Files Search Results” appears, select the [Disable the device. The Add/Remove Hardware Wizard in the control Panel can be
able to complete the driver installations.] check box, and then click [Finish].
47
AdonisC4EN-Printer-F1_FM_forPaper.book Page 48 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Windows XP, Windows Server 2003
Important
❒ SCSI print must be set to “active” from the control panel. For details, see Network Guide.
❒ Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
2
Note
❒ This machine can receive print data from one computer at a time only. If a job
from a computer collides with other data, a message may appear on the computer.
❒ To install another printer driver after setting the “1394_00n” port, click
[1394_00] as a port during the printer driver installation.
❒ When the printer driver is properly installed, connecting or disconnecting the
optional IEEE 1394 cable causes the printer icon to change.
A Connect the machine to the computer using the IEEE 1394 interface cable.
When the [Found New Hardware Wizard] dialog box appears, check that [This wizard helps you install software for: (Unknown)] is displayed.
B Select the [Install from a list on specific location (Advanced)] check box, and then
click [Next >].
C When the message “Please choose your search and installation option.” ap-
pears, select the [Search for the best driver in these locations.] check box, select
the [Include this location in the search:] check box, and then select the [Include
this location in the search:] check box.
D Insert the CD-ROM into the CD-ROM drive.
Note
❒ If Auto Run starts, click [Cancel], and then [Exit].
❒ To disable Auto Run, press the left {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
48
AdonisC4EN-Printer-F1_FM_forPaper.book Page 49 Friday, May 13, 2005 6:00 PM
Installing the Printer Driver Using IEEE 1394 (SCSI print)
E Specify the location where the source files of the printer driver is stored,
and then click [Next >].
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• RPCS
D:\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1
• PCL 5e
D:\DRIVERS\PCL5E\WIN2K_XP\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\WIN2K_XP\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1
When installation is complete, the printer connected to “1394_00n” appears in
the [Printers and Faxes] window. (“n” shows the number of printers connected.)
2
F Follow the on-screen instructions.
Note
❒ If the printer driver has already been installed, the printer icon is added to
the [Printers and Faxes] window. In this case, printer driver installation is
not necessary.
❒ Even if the printer driver is already installed, the message “Found New
Hardware Wizard” may appear when the machine is connected to the
computer using the IEEE 1394 interface cable for the first time. In that case,
install the printer driver.
❒ If printing does not work properly after the installation, delete the port and
reinstall the printer driver. For details, see p.151 “The Machine Does Not
Print”.
❒ If you do not want to install the printer when Found New Hardware Wizard starts under an operating system that supports SCSI print, disable the
device by following the procedure below:
A When the [Found New Hardware Wizard] dialog box appears, check that
[This wizard helps you install software for: Unknown] is displayed, select the
[Install from a list on specific location (Advanced)] check box, and then click
[Next >].
B When the message “Please choose your search and installation option.”
appears, clear all check boxes from [Search for the best driver in these locations.], and then click [Next >].
C When the message “The wizard could not find the software on your
computer for..” appears, click [OK].
D When the message “Cannot Install this Hardware” appears, select the
[Don't prompt again to install the software] check box, and then click [Finish].
49
AdonisC4EN-Printer-F1_FM_forPaper.book Page 50 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Printing with Bluetooth Connection
Supported Profiles
❖ SPP, HCRP
• A maximum of two Bluetooth adaptor or Bluetooth-equipped computers
can be connected at the same time using the Bluetooth interface: one by
SPP, one by HCRP.
• When connecting more than one Bluetooth adaptor or Bluetooth-equipped
computer at the same time, the first device that establishes connection is selected. When selecting the connection between the other devices, cancel
the first established connection.
• Conditions for bidirectional communications
• SPP connection does not support bidirectional communications.
• HCRP connection supports bidirectional communications.
2
❖ BIP
• For BIP connection, a module including PostScript 3 must be installed in
the machine.
• Only one Bluetooth adaptor or Bluetooth-equipped computer can be connected via BIP.
• Only JPEG images that can be printed using BIP.
• User codes are disabled for BIP.
You cannot print if print functions are restricted.
• Some printers do not support BIP.
Printing with Bluetooth Connection
To install the printer driver, follow the procedure used to install parallel interface.
Important
❒ To install the printer driver under Windows 2000 / XP Professional or Windows Server 2003, you must have an account that has Manage Printers permission. Log on as an Administrators or Power Users group member.
Note
❒ System requirements vary depending on the Bluetooth standard and specifications. For details, see the manuals supplied with each product.
❒ For information about setting up Bluetooth under other operating systems or
using it with different utilities, see the manuals supplied with those operating
systems or utilities.
50
AdonisC4EN-Printer-F1_FM_forPaper.book Page 51 Friday, May 13, 2005 6:00 PM
Printing with Bluetooth Connection
A Start 3Com Bluetooth Connection Manager.
B Check that the printer you want to use appears in 3Com Bluetooth Connection Manager.
C On the [Tool] menu, click [COM port].
D Check that the message “Bluetooth Serial Client (COMx) “ appears under
2
Client Ports. (X indicates the COM port number used by Bluetooth.)
E Click [Close].
F On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
G Click the icon of the printer you want to use.
H On the [File] menu, click [Properties].
I Click the [Ports] tab.
J Under [Port], select the [COMx:] check box.
X indicates the COM port
number used by Bluetooth.
K Click [OK].
Close the [Printers] window.
❖ If a dialog box appears while transmitting a print job, reestablish network connection as follows:
A Select the printer you want to use in the [Printers and Faxes] box.
B Click [Connect].
Note
❒ To always use the same printer, select the [Always use for this connection]
check box.
Reference
For details, see the manuals supplied with the Bluetooth adaptor or
computer equipped with Bluetooth.
51
AdonisC4EN-Printer-F1_FM_forPaper.book Page 52 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Configuring Security Mode Settings
A Start 3Com Bluetooth Connection Manager.
B On the [Tools] menu, click [Security Mode].
The [Security Mode] dialog box appears.
C Select the security mode in the [Security Mode:] list.
2
If you click [High], or [Custom], and specify [Link] in the [Custom Settings] dialog
box, enter the Bluetooth password. For information about entering the password, see p.52 “Printing in the Security Mode”.
For all other security modes and custom settings, no password is required.
Note
❒ For information about each mode, see the manuals supplied with the utility.
D Click [OK].
Close the [Security Mode] dialog box.
Reference
For details about the security mode, see 3Com Bluetooth Connection Manager Help. For details about the password entry which is required to transmit print jobs, see p.52 “Printing in the Security Mode”.
Printing in the Security Mode
A Send the print job to the printer in use.
Depending on the computer configuration, the [Connect] dialog box may appear. If it does, use it to establish the network connection.
B The [Authentication] dialog box appears.
C Enter the Bluetooth password, and then click [OK].
As the Bluetooth password, enter the last four digits of the machine's serial
number. You can find the serial number on the label attached to the back of
the machine. For example, if the serial number is 00A0-001234, the Bluetooth
password is 1234.
D The print job is sent.
Note
❒ The Bluetooth password differs for each machine and cannot be changed.
52
AdonisC4EN-Printer-F1_FM_forPaper.book Page 53 Friday, May 13, 2005 6:00 PM
If a Message Appears during Installation
If a Message Appears during Installation
Message number 58 or 34 indicates that the printer driver cannot be installed using Auto Run. Install the printer driver using [Add Printer] or [>Install Printer].
For Windows 95 / 98 / Me, Windows 2000 and Windows NT 4.0:
2
A On the [Start] menu, point to [Settings], and then click [Printers].
B Double-click the Add Printer icon.
C Follow the instructions in Add Printer Wizard.
Note
❒ If the printer driver is on a CD-ROM, the location of the RPCS printer driver
is either \DRIVERS\RPCS\WIN9X_ME, \DRIVERS\RPCS\WIN2K_XP,
or \DRIVERS\RPCS\NT4. If the installer starts, click [Cancel] to quit.
For Windows XP Professional and Windows Server 2003:
A On the [Start] menu, click [Printers and Faxes].
B Click [Add a printer].
C Follow the instructions in Add Printer Wizard.
Note
❒ If the printer driver is on a CD-ROM, the location of the RPCS printer driver
is \DRIVERS\RPCS\WIN2K_XP. If the installer starts, click [Cancel] to
quit.
For Windows XP Home Editions:
A On the [Start] menu, click [Printers and Faxes].
B Click [Add a Printer].
C Follow the instructions in Add Printer Wizard.
Note
❒ If the printer driver is on a CD-ROM, the location of the RPCS printer driver
is \DRIVERS\RPCS\WIN2K_XP. If the installer starts, click [Cancel] to
quit.
53
AdonisC4EN-Printer-F1_FM_forPaper.book Page 54 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Making Option Settings for the Printer
Make option settings for the machine using the printer driver when bidirectional
communication is disabled.
Reference
For details about making option settings for the printer, see p.56 “If Bidirectional Communication Is Disabled”.
2
Conditions for Bidirectional Communication
Bidirectional communication allows information about paper size and feed direction settings to be automatically sent to the printer. You can check machine
status from your computer.
• Bidirectional communication is supported by Windows 95 / 98 / Me / 2000 /
XP, Windows Server 2003, and Windows NT 4.0.
• If you use the RPCS printer driver and bidirectional communication is enabled under Windows 2000, the [Change Accessories] tab is unavailable.
Note
❒ The RPCS printer driver supports bidirectional communications and updates
the machine status automatically.
❒ The PCL printer driver supports bidirectional communications. You can update the machine status manually.
❒ The PostScript 3 printer driver does not support bidirectional communications.
To support bidirectional communication, the following conditions must be met:
❖ When connected with parallel cables
• The computer must support bidirectional communication.
• The machine must support bidirectional communication.
• The interface cable must support bidirectional communication.
• The machine must be connected to the computer using the standard parallel cables and parallel connectors.
• Under Windows 2000, [Enable bidirectional support] must be selected, and
[Enable printer pooling] must not be selected on the [Ports] tab with the RPCS
printer driver.
54
AdonisC4EN-Printer-F1_FM_forPaper.book Page 55 Friday, May 13, 2005 6:00 PM
Making Option Settings for the Printer
❖ When connected with the network
• The machine must support bidirectional communication.
• SmartDeviceMonitor for Client included on the CD-ROM must be installed, and TCP/IP must be used.
• Under Windows 2000, [Enable bidirectional support] must be selected, and
[Enable printer pooling] must not be selected on the [Ports] tab with the RPCS
printer driver.
• In addition to the above, one of the following conditions must also be met:
• The SmartDeviceMonitor for Client port and the TCP/IP protocol must
be used.
• The standard TCP/IP port must be used without changing the default
port name (for Windows 2000 / XP and Windows Server 2003).
• Microsoft TCP/IP print IP address must be specified for use (for Windows NT 4.0).
• IPP port name must include the IP address when using the IPP protocol.
2
❖ When connected with IEEE 1394
• The computer must support bidirectional communication.
• The machine must be connected to the IEEE 1394 connector of a computer
using the IEEE 1394 interface cable.
• [Activate] must be selected in the SCSI print of IEEE 1394 and [Activate] must
be selected in the Bidi-SCSI print.
• Under Windows 2000 / XP or Windows Server 2003, [Enable bidirectional
support] must be selected, and [Enable printer pooling] must not be selected
on the [Ports] tab with RPCS printer driver.
❖ When connected with USB
The machine must be connected to the computer's USB port using the USB interface cable.
The computer must support bidirectional communication.
Note
❒ Install SmartDeviceMonitor for Client from the supplied CD-ROM.
55
AdonisC4EN-Printer-F1_FM_forPaper.book Page 56 Friday, May 13, 2005 6:00 PM
Preparing the Machine
If Bidirectional Communication Is Disabled
Set up option settings when bidirectional communications are disabled.
Limitation
❒ Under Windows 2000 / XP and Windows Server 2003, Manage Printers permission is required to change the printer properties in the [Printers] folder.
Log on as an Administrators or Power Users group member.
❒ Under Windows NT 4.0, Full Control permission is required to change the
printer properties in the [Printers] folder. Log on as an Administrators or Power Users group member.
2
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
D Click the [Accessories] tab.
If options in the [Change Accessories] tab are disabled, bidirectional connection
is enabled. In this case, no change is necessary for option settings.
Note
❒ If you are using the RPCS printer driver, click the [Change Accessories] tab.
E Select options installed from the [Options] area, and then make the necessary settings.
F Select the total amount of the memory in [Total memory:] when the optional
SDRAM module is added.
G Under [Paper source tray settings:], click and highlight the tray to be used, and
then select the appropriate size, position, and type for the tray. Select the
[Do not use Auto Tray Select] check box to exclude the tray from the targets of
automatic tray selection.
H Click [OK] to close the printer properties dialog box.
56
AdonisC4EN-Printer-F1_FM_forPaper.book Page 57 Friday, May 13, 2005 6:00 PM
Installing Font Manager 2000
Installing Font Manager 2000
Limitation
❒ Under Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0, installing applications by Auto Run requires administrator permission. To install a
printer driver by Auto Run, log on using an account that has administrator
permission.
2
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C Click [Font Manager 2000].
D Follow the instructions on the screen.
57
AdonisC4EN-Printer-F1_FM_forPaper.book Page 58 Friday, May 13, 2005 6:00 PM
Preparing the Machine
Using Adobe PageMaker Version 6.0, 6.5,
or 7.0
Under Windows 95 / 98 / Me / 2000 / XP, Windows Server 2003, or Windows NT
4.0 with Adobe PageMaker, you need to copy PPD files to the PageMaker folder.
PPD files have the .ppd extension in the folder “DRIVERS\PS\WIN9X_ME\(Language)\DISK1\” on the CD-ROM.
The “WIN9X_ME” folder inside the “PS” folder is for Windows 95 / 98 / Me. Use
the folder at this level that is appropriate for the operating system you are currently using.
The third folder “(Language)” may be substituted by an appropriate language
name.
Copy the .ppd file to the PageMaker folder.
• For PageMaker 6.0 default installation
The directory is “C:\PM6\RSRC\PPD4”.
• For PageMaker 6.5 default installation
The directory is “C:\PM65\RSRC\USENGLISH\PPD4”.
The “USENGLISH” may vary depending on your language selection.
• For PageMaker 7.0 default installation
The directory is “C:\PM7\RSRC\USENGLISH\PPD4”.
The “USENGLISH” may vary depending on your language selection.
2
Note
❒ If the driver is not set correctly after copying the “.ppd” file, printing may not
be performed properly.
❒ When using PageMaker, the optional features that can be selected by the
printer driver will not be active. The following procedure describes how to
activate the optional printer features.
A On the [File] menu, click [Print].
The [Print Document] dialog box appears.
B Make the necessary settings in the [Features] box.
58
AdonisC4EN-Printer-F1_FM_forPaper.book Page 59 Friday, May 13, 2005 6:00 PM
3. Setting Up the Printer Driver
PCL - Accessing the Printer Properties
Windows 95 / 98 / Me - Accessing the Printer Properties
There are two methods to open the printer properties dialog box.
Making Printer Default Settings
To make the printer default settings, open the printer properties dialog box from
the [Printers] window.
Important
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
D Make the necessary settings, and then click [OK].
Note
❒ With some applications, the printer driver settings are not used, and the
application's own default settings are applied.
Reference
For details, see Printer Driver Help.
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the printer properties
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows 95 / 98 / Me.
A On the [File] menu, click [Print].
The [Print] dialog box appears.
B Select the printer you want to use in the [Name] list, and then click [Properties].
The printer properties dialog box appears.
C Make the necessary settings, and then click [OK].
59
AdonisC4EN-Printer-F1_FM_forPaper.book Page 60 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
D Click [OK] to start printing.
Note
❒ The procedure to open the printer properties dialog box may vary depending on the application. For details, see the manuals provided with the application you use.
❒ With some applications, the printer driver settings are not used, and the
application's own default settings are applied.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box
of an application. Settings made here are used as defaults when printing
from this application.
3
Reference
For details, see Printer Driver Help.
Windows 2000 - Accessing the Printer Properties
Making Printer Default Settings - The Printer Properties
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Manage Printers permission. Members of the
Administrator and Power Users groups have Manage Printers permission by
default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
The printer properties dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
60
AdonisC4EN-Printer-F1_FM_forPaper.book Page 61 Friday, May 13, 2005 6:00 PM
PCL - Accessing the Printer Properties
Making Printer Default Settings - Printing Preferences
Important
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Printing Preferences...].
3
The [Printing Preferences] dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the [Printing Preferences]
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows 2000.
Note
❒ The procedure to open the [Printing Preferences] dialog box may vary depending on the application. For details, see the manuals provided with the application you use.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box of
an application. Settings made here are used as defaults when printing from
this application.
A On the [File] menu, click [Print...].
The [Print] dialog box appears.
B Select the printer you want to use in the [Select Printer] list.
C Make the necessary settings, and then click [Apply] to start printing.
Reference
For details, see Printer Driver Help.
61
AdonisC4EN-Printer-F1_FM_forPaper.book Page 62 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
Windows XP, Windows Server 2003 - Accessing the Printer
Properties
Making Printer Default Settings - The Printer Properties
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Manage Printers permission. Members of the
Administrators and Power Users groups have Manage Printers permission
by default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
3
A On the [Start] menu, click [Printers and Faxes].
The [Printers and Faxes] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
The printer properties dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
62
AdonisC4EN-Printer-F1_FM_forPaper.book Page 63 Friday, May 13, 2005 6:00 PM
PCL - Accessing the Printer Properties
Making Printer Default Settings - Printing Preferences
Important
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, click [Printers and Faxes].
The [Printers and Faxes] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Printing Preferences...].
3
The [Printing Preferences] dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the [Printing Preferences]
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows XP.
Note
❒ The procedure to open the [Printing Preferences] dialog box may vary depending on the application. For details, see the manuals provided with the application you use.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box of
an application. Settings made here are used as defaults when printing from
this application.
A On the [File] menu, click [Print...].
The [Print] dialog box appears.
B Select the printer you want to use in the [Select Printer] list.
C Make the necessary settings, and then click [Apply] to start printing.
Reference
For details, see Printer Driver Help.
63
AdonisC4EN-Printer-F1_FM_forPaper.book Page 64 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
Windows NT 4.0 - Accessing the Printer Properties
Making Printer Default Settings - The Printer Properties
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Full Control permission. Members of the Administrators, Server Operators, Print Operators, and Power Users groups
have Full Control permission by default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
3
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
The printer properties dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
Making Printer Default Settings - Default
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Full Control permission. Members of the Administrators, Server Operators, Print Operators, and Power Users groups
have Full Control permission by default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Document Defaults].
The [Default] dialog box appears.
64
AdonisC4EN-Printer-F1_FM_forPaper.book Page 65 Friday, May 13, 2005 6:00 PM
PCL - Accessing the Printer Properties
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the printer properties
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows NT 4.0.
3
Note
❒ The procedure to open the printer properties dialog box may vary depending
on the application. For details, see the manuals provided with the application
you use.
❒ With some applications, the printer driver settings are not used, and the application's own default settings are applied.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box of
an application. Settings made here are used as defaults when printing from
this application.
A On the [File] menu, click [Print].
The [Print] dialog box appears.
B Select the printer you want to use in the [Name] list, and then click [Properties].
The printer properties dialog box appears.
C Make the necessary settings, and then click [OK].
D Click [OK] to start printing.
Reference
For details, see Printer Driver Help.
65
AdonisC4EN-Printer-F1_FM_forPaper.book Page 66 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
RPCS - Accessing the Printer Properties
Windows 95 / 98 / Me - Accessing the Printer Properties
There are two dialog box types of the printer properties dialog box.
“Multi-tab” is used as an example in this manual. For details about changing the
dialog box types, see the printer driver Help.
❖ Multi-tab
This dialog box type is designed for users who often change print settings to
perform various printing operations.
3
❖ Custom Setting
This dialog box type is designed for users who rarely change print settings.
This type of dialog box may vary depending on the installed options.
Making Printer Default Settings
To make the printer default settings, open the printer properties dialog box from
the [Printers] window.
Important
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
Note
❒ With some applications, the printer driver settings are not used, and the application's own default settings are applied.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
Note
❒ When you open the printer properties dialog box initially after installing
the RPCS printer driver, a confirmation message appears. After clicking
[OK], the printer properties dialog box appears.
D Make the necessary settings, and then click [OK].
Reference
For details, see Printer Driver Help.
66
AdonisC4EN-Printer-F1_FM_forPaper.book Page 67 Friday, May 13, 2005 6:00 PM
RPCS - Accessing the Printer Properties
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the printer properties
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows 95 / 98 / Me.
Note
❒ The procedure to open the printer properties dialog box may vary depending
on the application. For details, see the manuals provided with the application
you use.
❒ With some applications, the printer driver settings are not used, and the application's own default settings are applied.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box of
an application. Settings made here are used as defaults when printing from
this application.
3
A On the [File] menu, click [Print].
The [Print] dialog box appears.
B Select the printer you want to use in the [Name] list, and then click [Properties].
The printer properties dialog box appears.
C Make the necessary settings, and then click [OK].
D Click [OK] to start printing.
Reference
For details, see Printer Driver Help.
67
AdonisC4EN-Printer-F1_FM_forPaper.book Page 68 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
Windows 2000 - Accessing the Printer Properties
Making Printer Default Settings - The Printer Properties
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Manage Printers permission. Members of the
Administrators and Power Users groups have Manage Printers permission
by default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
3
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
The printer properties dialog box appears.
Note
❒ When you open the printer properties dialog box initially after installing
the RPCS printer driver, a confirmation message appears. After clicking
[OK], the printer properties dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
68
AdonisC4EN-Printer-F1_FM_forPaper.book Page 69 Friday, May 13, 2005 6:00 PM
RPCS - Accessing the Printer Properties
Making Printer Default Settings - Printing Preferences
Important
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Printing Preferences...].
3
The [Printing Preferences] dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the [Printing Preferences]
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows 2000.
Note
❒ The procedure to open the [Printing Preferences] dialog box may vary depending on the application. For details, see the manuals provided with the application you use.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box of
an application. Settings made here are used as defaults when printing from
this application.
A On the [File] menu, click [Print...].
The [Print] dialog box appears.
B Select the printer you want to use in the [Select Printer] list.
C Make the necessary settings, and then click [Apply] to start printing.
Reference
For details, see Printer Driver Help.
69
AdonisC4EN-Printer-F1_FM_forPaper.book Page 70 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
Windows XP, Windows Server 2003 - Accessing the Printer
Properties
Making Printer Default Settings - The Printer Properties
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Manage Printers permission. Members of the
Administrators and Power Users groups have Manage Printers permission
by default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
3
A On the [Start] menu, click [Printers and Faxes].
The [Printers and Faxes] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
The printer properties dialog box appears.
Note
❒ When you open the printer properties dialog box initially after installing
the RPCS printer driver, a confirmation message appears. After clicking
[OK], the printer properties dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
70
AdonisC4EN-Printer-F1_FM_forPaper.book Page 71 Friday, May 13, 2005 6:00 PM
RPCS - Accessing the Printer Properties
Making Printer Default Settings - Printing Preferences
Important
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, click [Printers and Faxes].
The [Printers and Faxes] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Printing Preferences...].
3
The [Printing Preferences] dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the [Printing Preferences]
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows XP.
Note
❒ The procedure to open the [Printing Preferences] dialog box may vary depending on the application. For details, see the manuals provided with the application you use.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box of
an application. Settings made here are used as defaults when printing from
this application.
A On the [File] menu, click [Print...].
The [Print] dialog box appears.
B Select the printer you want to use in the [Select Printer] list.
C Make the necessary settings, and then click [Apply] to start printing.
Reference
For details, see Printer Driver Help.
71
AdonisC4EN-Printer-F1_FM_forPaper.book Page 72 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
Windows NT 4.0 - Accessing the Printer Properties
Making Printer Default Settings - The Printer Properties
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Full Control permission. Members of the Administrators, Server Operators, Print Operators, and Power Users groups
have Full Control permission by default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
3
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
The printer properties dialog box appears.
Note
❒ When you open the printer properties dialog box initially after installing
the RPCS printer driver, a confirmation message appears. After clicking
[OK], the printer properties dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
Making Printer Default Settings - Default
Important
❒ To change the printer default settings including option configuration settings,
log on using an account that has Full Control permission. Members of the Administrators, Server Operators, Print Operators, and Power Users groups
have Full Control permission by default.
❒ You cannot change the printer default settings for each user. Settings made in
the printer properties dialog box are applied to all users.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
72
B Click the icon of the printer you want to use.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 73 Friday, May 13, 2005 6:00 PM
RPCS - Accessing the Printer Properties
C On the [File] menu, click [Document Defaults...].
The [Default] dialog box appears.
D Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
Reference
For details, see Printer Driver Help.
3
Making Printer Settings from an Application
You can make printer settings for a specific application.
To make printer settings for a specific application, open the printer properties
dialog box from that application. The following explains how to make settings
for the WordPad application provided with Windows NT 4.0.
Note
❒ The procedure to open the printer properties dialog box may vary depending
on the application. For details, see the manuals provided with the application
you use.
❒ With some applications, the printer driver settings are not used, and the application's own default settings are applied.
❒ Any settings you make in the following procedure are valid for the current
application only.
❒ General users can change the properties displayed in the [Print] dialog box of
an application. Settings made here are used as defaults when printing from
this application.
A On the [File] menu, click [Print].
The [Print] dialog box appears.
B Select the printer you want to use in the [Name] list, and then click [Properties].
The printer properties dialog box appears.
C Make the necessary settings, and then click [OK].
D Click [OK] to start printing.
Reference
For details, see Printer Driver Help.
73
AdonisC4EN-Printer-F1_FM_forPaper.book Page 74 Friday, May 13, 2005 6:00 PM
Setting Up the Printer Driver
3
74
AdonisC4EN-Printer-F1_FM_forPaper.book Page 75 Friday, May 13, 2005 6:00 PM
4. Other Print Operations
Printing a PDF File Directly
You can send PDF files directly to the
machine for printing, without having
to open a PDF application.
Limitation
❒ This function is possible only when
the optional PostScript 3 unit is installed.
❒ This function is possible for genuine Adobe PDF files only.
❒ Version 1.3, 1.4, and 1.5 PDF files
are compatible.
❒ Transparency and JBIG2 (functions
of PDF version 1.4) are not compatible.
❒ PDF version 1.5 exclusive functions
are not compatible.
Note
❒ Paper size errors may occur when
printing on custom size paper.
Printing Method
❖ Using DeskTopBinder Lite
PDF files registered with DeskTopBinder Lite can be sent directly
to the machine for printing.
Limitation
❒ Use DeskTopBinder Lite in the
supplied CD-ROM.
Note
❒ PDF Direct Print settings can be
made from PDF Direct Print
properties.
❒ When printing PDF files for which
a password is set, one of the following settings is required:
• Enter the PDF password from
PDF Direct Print properties.
The RPCS printer driver must
be installed.
• To set the PDF password, select [Change PDF Password] on
the [PDF Menu] in Printer Features.
❒ When a group password is set
with DeskTopBinder Lite, set a
group password using [PDF
Group Password] on the [PDF
Menu] in Printer Features.
Reference
For details, see DeskTopBinder
Lite Help.
❖ Using commands
From UNIX, you can print PDF
files directly, using commands
such as “ftp” and “lpr”.
75
AdonisC4EN-Printer-F1_FM_forPaper.book Page 76 Friday, May 13, 2005 6:00 PM
Other Print Operations
Unauthorized Copy Control
You can embed patterns and text under printed text to prevent unauthorized
copying of the document. Unauthorized Copy Control consists of two functions:
[Data security for copying] and [Mask type:].
Important
❒ This function is designed to discourage copying of confidential documents; it
does not prevent unauthorized use of information.
Using [Data security for copying]
You can embed a pattern by setting it in the printer driver.
4
❖ Setting [Data security for copying] in the printer driver
• Select the [Data security for copying] checkbox. You can also enter the text in
the [Text:] box.
• You cannot select the [Mask type:] checkbox at the same time.
• To print a document protected by gray overprint, the machine must be set
up correctly. Consult an administrator.
76
AdonisC4EN-Printer-F1_FM_forPaper.book Page 77 Friday, May 13, 2005 6:00 PM
Unauthorized Copy Control
❖ Printing a document using [Data security for copying]
N
op
o C ying o C
g N o Cop ing N
N Copy g No
g
n
o opyin N
gN
yin No C opying
g oC
g
n
i
y
yin
p
g N Cop
g
pyin g No opyin
C yin
n
i
o
y
op ing N Cop
o
y
py
Co ying N o Cop
p
Co ying N o Cop
p
N
o
Co
4
AJL030S
1. The print preview of the pattern
and text you have set is displayed.
3. The document is blanked by gray
overprint.
2. The document is copied or stored
in this machine or another copier /
multifunction machine where the
optional Copy Data Security unit is
installed.
Reference
For details about setting [Data security for copying], see Printer Driver Help.
Limitation
❒ When printing a document that is set with [Data security for copying], the machine does not require the optional Copy Data Security unit to be installed.
The Copy Data Security unit is required when copying or storing a document protected by gray overprint.
❒ Only the RPCS printer driver is supported.
❒ Printing at 200 dpi is not possible.
❒ You cannot partially embed a pattern and text in a document.
❒ Use 182 × 257 mm (71/4 × 101/2 in.) or larger paper.
❒ Use ordinary or recycled paper of at least 70% whiteness.
❒ Duplex printing may interfere with this function as a result of text and patterns being visible through the paper.
77
AdonisC4EN-Printer-F1_FM_forPaper.book Page 78 Friday, May 13, 2005 6:00 PM
Other Print Operations
Using [Mask type:]
You can embed patterns and text in a document by setting in the printer driver
to prevent unauthorized copying.
4
❖ Setting [Mask type:] in the printer driver
• Select a pattern from [Mask type:], and then enter text in the [Text:] box.
Note
❒ You can set only [Text:], but [Mask type:] and [Text:] must be set together.
❖ Printing a document using [Mask type:]
N Copy g N
o
o
yin
g N o Cop ing N
py
N
No
ng o Co ying
N Cop
N
g
yin No opying
g
g
C
pyin g No opyin g
C
in
in
opy ing No Copy n
i
opy ing No Copy
o
y
py
Co ying N o Cop
p
N
o
op
o C pying No C
C
C
ng
No Copyi g No
o
o
yin
g N o Cop ing N
py
N
No
ng o Co ying
N
op
gN
yin No C opying
g
g
C
pyin g No opyin
C
in
in
opy ing No Copy
o
yi
py
Co ying N o Cop y
p
Co ying N o Cop
p
p
N
Co ing
Co
AJL031S
1. The print preview of the pattern
and text you have set is displayed.
2. The document is copied, scanned,
or stored in this machine or another
copier / multifunction machine.
3. The pattern and text you have set
appear.
Reference
For details about setting [Mask type:], see Printer Driver Help.
78
Limitation
❒ Only the RPCS printer driver is supported.
❒ Printing at 200 dpi is not possible.
❒ You cannot partially embed patterns and text strings in a document.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 79 Friday, May 13, 2005 6:00 PM
Unauthorized Copy Control
Note
❒ Due to the effects of the settings, the results of copying, scanning, and saving
documents in the document server may vary depending on the machine
model and setting conditions.
❒ Printing with background patterns and text may be slower than normal printing.
Important Notice
• Ricoh does not provide warranty regarding the appearance of print patterns
and other copy protection features. The appearance of the print patterns and
the performance of Unauthorized Copy Control may vary depending on the
quality of paper used and the machine model and settings.
• Ricoh takes no responsibility for any damages sustained in connection with
use of or inability to make use of Unauthorized Copy Control print patterns.
4
79
AdonisC4EN-Printer-F1_FM_forPaper.book Page 80 Friday, May 13, 2005 6:00 PM
Other Print Operations
Using the Print Job List
Print files stored in the machine can be printed. You can select the print files
from the Complete List or List Per User ID screen.
The screen that appears depends on the [Initial Print Job List] setting made under
[Printer Features], [System].
Selecting the Initial Print Job List
For the print job list, select one of the two display types:
• Complete List: displays a list of saved print jobs.
• List Per User ID: displays a list of user IDs.
4
Reference
For details about list types, see p.81 “Displaying a Print Job List”.
A Press the {User Tools/Counter} key.
The User Tools / Counter menu appears.
B Press [Printer Features].
The Printer Features menu appears.
C On the [System] tab, press [Initial Print Job List].
D Select either [Complete List] or [List Per User ID].
After configuring the settings, the selected type of print job list is displayed.
80
AdonisC4EN-Printer-F1_FM_forPaper.book Page 81 Friday, May 13, 2005 6:00 PM
Using the Print Job List
Displaying a Print Job List
A list of files stored in the machine can be viewed on the display panel.
A Press the {Printer} key.
4
AJM011S
The Printer screen appears.
B Press [Print Jobs].
Either the Complete List or List Per User ID screen appears.
81
AdonisC4EN-Printer-F1_FM_forPaper.book Page 82 Friday, May 13, 2005 6:00 PM
Other Print Operations
❖ Complete List
If you select [Complete List] from [Initial Print Job List] (see p.80 “Selecting the
Initial Print Job List”), the following screen appears:
AJM006S
4
1. [Per User ID]
Displays List Per User ID.
2. [Complete List]
Displays all files stored in the machine.
3. [Locked Print Job List]
Displays only Locked Print files
stored in the machine. See p.87
“Locked Print”.
4. [Sample Print Job List]
Displays only Sample Print files
stored in the machine. See p.84 “Sample Print”.
5. [Hold Print Job List]
Displays only Hold Print files stored
in the machine. See p.90 “Hold Print”.
6. [Stored Print Job List]
Displays only Stored Print files stored
in the machine. See p.93 “Stored
Print”.
7. User ID, Date/Time, and File
Name display
Displays the time when the instruction to print the stored files was entered, User ID, and the file names.
8. [UPrev.] / [TNext.]
If the list of files does not fit on the
screen, scroll down to view the list.
9. [Exit]
82
Returns to the Printer screen.
10. [Details]
Displays details about a selected file.
11. [Select All Jobs]
Selects all files stored in the machine.
12. [Clear All]
Clears all selections.
13. [Print]
Prints a selected file.
14. [Delete]
Deletes a selected file.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 83 Friday, May 13, 2005 6:00 PM
Using the Print Job List
❖ List Per User ID
If you select [List Per User ID] from [Initial Print Job List] (see p.80 “Selecting
the Initial Print Job List”), the following screen appears:
AJM012S
1. [Clear]
Deselects a selection.
2. User ID
Displays user IDs who sent files to the
machine.
3. [UPrev.] / [TNext.]
If the list of files does not fit on the
screen, scroll down to view the list.
4. [Exit]
4
5. [Complete List]
Displays all print jobs.
6. [Job List Per User ID]
Displays the print job list of each ID.
7. [Print All Jobs]
Prints all documents of the desired ID.
If a user sends a different type of print
jobs in the same ID, you can select
which type of a print job to print.
Returns to the Printer screen.
Reference
For details about printing from the List Per User ID screen, see p.80 “Selecting the Initial Print Job List”.
Note
❒ The display is not updated if a new file is stored while the list of stored files
is displayed. To update the display, press [Exit] to return to the Printer
screen, and then press [Print Jobs] again.
❒ If a large number of print jobs are stored in the machine, processing may
slow temporarily, depending on which functions are used.
❒ If you select [Complete List] from [Initial Print Job List] and press [Per User ID]
in the Complete List screen, the screen switches to the List Per User ID
screen where [Back] appears at the bottom right. Press [Back] or [Complete
List] to switch to the Complete List screen. When you select [List Per User ID]
from [Initial Print Job List], [Back] does not appear in the List Per User ID
screen. Press [Complete List] to switch to the List Per User ID screen.
❒ To store files in the machine, you can use the Document Server as well as
Sample Print, Locked Print, Hold Print, or Stored Print. See p.135 “Using
the Document Server”.
83
AdonisC4EN-Printer-F1_FM_forPaper.book Page 84 Friday, May 13, 2005 6:00 PM
Other Print Operations
Sample Print
Use this function to print only the first
set of a multiple-set print job. After
you have checked the result, remaining sets can be printed or canceled using the machine's control panel. This
can reduce misprints due to mistakes
in content or settings.
Limitation
❒ A Sample Print file cannot be stored
if:
• the total number of Sample Print,
Locked Print, Hold Print, and
Stored Print files in the machine is
over 100. (The maximum number
varies depending on the volume
of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the machine
contain over 9,000 pages in total.
4
Note
❒ If a Sample Print file has not been
stored properly, check the error
log on the control panel (see p.104
“Checking the Error Log”).
❒ Even after you turn off the machine, stored documents in the machine remain. However, the [Auto
Delete Temporary Print Jobs] or [Auto
Delete Stored Print Jobs] settings are
applied first (see p.128 “System”).
❒ If the application has a collate option, make sure it is not selected
before sending a print job. By default, Sample Print jobs are automatically collated by the printer
driver. If a collate option is selected from the application's [Print] dialog box, more prints than
intended may be produced.
84
❒ If the first set of the Sample Print
files is not as you expected and you
do not want to print remaining
sets, delete the Sample Print file
using the display panel. If you
print the remaining sets of the
Sample Print file, the job in the machine is deleted automatically.
Printing a Sample Print File
The following procedure describes how
to print a Sample Print file with the PCL
6 / 5e and the RPCS printer driver. For
information about how to print a Sample Print file with the PostScript 3 printer
driver, see PostScript 3 Supplement included as a PDF file on the CD-ROM.
Limitation
❒ Applications with their own drivers, such as PageMaker, do not
support this function.
❒ If you are using Mac OS X, you need
Mac OS X v10.2 or higher to use this
function.
Note
❒ The following procedure describes
when you select [Complete List]
from [Initial Print Job List] (see p.80
“Selecting the Initial Print Job
List”).
A Configure
Sample Print in the
printer driver's properties.
Reference
For details about configuring
the printer drivers, see the relevant Help files.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 85 Friday, May 13, 2005 6:00 PM
Sample Print
B Start
printing from the application's [Print] dialog box.
Note
❒ Make sure to set more than two
copies.
E Press [Sample Print Job List].
A list of Sample Print files stored in
the machine appears.
The Sample Print job is sent to the
machine, and the first set is printed.
C On the machine's control panel,
press the {Printer} key to display
the Printer screen.
The following items also appear:
• User ID: The user ID set up by
the printer driver.
• Date / Time: The date and time
when the job was sent from the
computer.
• File Name: The name of files
stored in the machine.
4
Note
❒ Depending on the security settings, certain print jobs may not
be displayed.
AJM011S
D Press [Print Jobs].
A list of print files stored in the machine appears.
F Select the file you want to print
by pressing it.
Note
❒ To select all print jobs, press [Select All Jobs].
❒ Press [UPrev.] or [TNext.] to
scroll through the list.
❒ To cancel a selection, press the
highlighted print job again. To
clear all selections, press [Clear
All].
❒ To view details about a selected
print file, press [Details].
G Press [Print].
85
AdonisC4EN-Printer-F1_FM_forPaper.book Page 86 Friday, May 13, 2005 6:00 PM
Other Print Operations
H Enter the new number of sets using the number keys.
Deleting Sample Print Files
If you are not satisfied with the sample printout, you can delete the Sample Print file, revise it and print it
again until the settings are suitable.
If you do not want to change the
set quantity, proceed to step I.
Note
❒ When multiple files are selected
without setting a quantity, 1
page less than the minimum
number of all settings is applied.
4
❒ When the number of set quantity
is changed, the changed quantity
is applied to all selected print
files.
❒ You can enter up to 999 sets.
❒ Press {Clear/Stop} to correct any
entry mistakes.
I Press [Yes].
The remaining sets are printed.
Important
❒ When printing is completed, the
stored file will be deleted.
Note
❒ Press [No] to cancel printing.
❒ To stop printing after printing
has started, press [Exit], and
then press [Job Reset]. The file is
deleted.
❒ Remaining print jobs are printed before the Sample Print job.
86
A Press the {Printer} key to display
the Printer screen.
B Press [Print Jobs].
A list of the print files stored in the
machine appears.
C Press [Sample Print Job List].
A list of Sample Print files stored in
the machine appears.
Note
❒ Depending on the security settings, certain print jobs may not
be displayed.
D Select the file you want to delete
by pressing it.
E Press [Delete].
The delete confirmation screen
will appear.
F Press [Yes] to delete the file.
After the file has been deleted, the
file list screen will return.
Note
❒ If you do not want to delete the
file, press [No].
AdonisC4EN-Printer-F1_FM_forPaper.book Page 87 Friday, May 13, 2005 6:00 PM
Locked Print
Locked Print
Use this function to maintain privacy
when printing confidential documents
on the machine over a shared network.
Usually, it is possible to print data using the display panel once it is stored
in this machine. When using Locked
Print, it is not possible to print unless a
password is entered on the machine's
display panel. Your confidential documents will be safe from being viewed
by other people.
Limitation
❒ A Locked Print file cannot be stored
if:
• the total number of Sample Print,
Locked Print, Hold Print, and
Stored Print files in the machine is
over 100. (The maximum number
varies depending on the volume
of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the machine
contain over 9,000 pages in total.
Note
❒ If a Locked Print file has not been
stored properly, check the error
log on the control panel (see p.104
“Checking the Error Log”).
❒ Even after you turn off the machine, stored documents remain.
However, the [Auto Delete Temporary Print Jobs] or [Auto Delete Stored
Print Jobs] settings are applied first
(see p.128 “System”).
❒ If the application has a collate option, make sure it is not selected
before sending a print job. Locked
Print jobs are automatically collated by the printer driver as default.
If a collate option is selected in the
application print dialog box, more
sets than intended may be printed.
❒ After the Locked Print file is printed, the job is automatically deleted.
Printing a Locked Print File
The following procedure describes
how to print a Locked Print file with
the PCL 6 / 5e and the RPCS printer
driver. For information about how to
print a Locked Print file with the PostScript 3 printer driver, see PostScript 3
Supplement included as a PDF file on
the CD-ROM.
4
Limitation
❒ Applications with their own drivers, such as PageMaker, do not
support this function.
❒ If you are using Mac OS X, you need
Mac OS X v10.2 or higher to use this
function.
Note
❒ The following procedure describes
when you select [Complete List]
from [Initial Print Job List] (see p.80
“Selecting the Initial Print Job
List”).
A Configure the Locked Print in the
printer driver's properties.
Reference
For details about configuring
the printer drivers, see the corresponding Help files.
B Start
printing from the application's [Print] dialog box.
The Locked Print job is sent to the
machine.
C On the machine's control panel,
press the {Printer} key to display
the Printer screen.
87
AdonisC4EN-Printer-F1_FM_forPaper.book Page 88 Friday, May 13, 2005 6:00 PM
Other Print Operations
D Press [Print Jobs].
A list of print files stored in the machine appears.
E Press [Locked Print Job List].
A list of Locked Print files stored in
the machine appears.
4
F Select the file you want to print by
pressing it.
Note
❒ To select all print jobs, press [Select All Jobs].
❒ Press [UPrev.] or [TNext.] to
scroll through the list.
❒ To cancel a selection, press the
highlighted print job again. To
clear all selections, press [Clear
All].
❒ To view details about a selected
print file, press [Details].
G Press [Print].
The password screen appears.
The following items also appear:
• User ID: The user ID set up by
the printer driver.
• Date / Time: The date and time
when the job was sent from the
computer.
Note
❒ If Locked Print is selected, file
names are displayed as “*****”
on the screen to prevent unauthorized viewing.
❒ Depending on the security settings, certain print jobs may not
be displayed.
88
H Enter
the password using the
number keys, and then press [OK].
The print confirmation screen appears.
Note
❒ A confirmation screen will appear if the password is not entered correctly. Press [OK] to
enter the password again.
❒ When multiple print files are selected, the machine prints only
files that correspond to the entered password. The number of
files is displayed on the confirmation screen.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 89 Friday, May 13, 2005 6:00 PM
Locked Print
I Press [Yes].
The locked file is printed.
Important
❒ When printing is completed, the
stored file will be deleted.
Note
❒ Press [No] to cancel printing.
❒ To stop printing after printing
has started, press [Exit], and
then press [Job Reset]. The file
will be deleted.
Deleting Locked Print Files
A Press the {Printer} key to display
the Printer screen.
B Press [Print Jobs].
A list of the print files stored in the
machine appears.
C Press [Locked Print Job List].
F Enter the password using the number
keys, and then press [OK].
The delete confirmation screen appears.
Note
❒ A confirmation screen will appear if the password is not entered correctly. Press [OK] to
enter the password again.
❒ When multiple files are selected, the machine deletes only
files that correspond to the entered password. The number of
files to be deleted is displayed
on the confirmation screen.
4
G Press [Yes].
After the file has been deleted, the
file list screen returns.
Note
❒ If you do not want to delete the
file, press [No].
A list of Locked Print files stored
appears.
Note
❒ Depending on the security settings, certain print jobs may not
be displayed.
D Select the file you want to delete
by pressing it.
E Press [Delete].
The password screen is displayed.
89
AdonisC4EN-Printer-F1_FM_forPaper.book Page 90 Friday, May 13, 2005 6:00 PM
Other Print Operations
Hold Print
Use this function to temporarily hold
a file in the machine, and print it from
the computer or the machine's control
panel later.
Limitation
❒ A Hold Print file cannot be stored
if:
• the total number of Sample Print,
Locked Print, Hold Print, and
Stored Print files in the machine is
over 100. (The maximum number
varies depending on the volume
of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the machine
contain over 9,000 pages in total.
4
Note
❒ If a Hold Print file has not been
stored properly, check the error
log on the control panel (see p.104
“Checking the Error Log”).
❒ Even after you turn off the machine, stored documents in the machine remain. However, the [Auto
Delete Temporary Print Jobs] or [Auto
Delete Stored Print Jobs] settings are
applied first (see p.128 “System”).
❒ If the application has a collate option, make sure it is not selected
before sending a print job. By default, Hold Print jobs are automatically collated by the printer
driver. If a collate option is selected from the application's Print dialog box, more prints than intended
may be produced.
Printing a Hold Print File
The following procedure describes
how to print a Hold Print file with the
RPCS printer driver. For information
about how to print a Hold Print file
with the PostScript 3 printer driver,
see Postscript 3 supplement included as
a PDF file in the supplied CD-ROM.
Limitation
❒ Applications with their own drivers,
such as PageMaker, do not support
this function.
❒ If you are using Mac OS X, you need
Mac OS X v10.2 or higher to use this
function.
Reference
For details about setting printer
drivers, see Printer Driver Help.
You can also print or delete a Hold
Print file from Web Image Monitor. For details, see Web Image
Monitor Help.
Note
❒ The following procedure describes
when you select [Complete List]
from [Initial Print Job List] (see p.80
“Selecting the Initial Print Job
List”).
A Configure Hold Print in the printer
driver’s properties.
Reference
For details about configuring
the printer drivers, see the relevant Help files.
B Click [Details…], and then enter a
User ID in the [User ID] box.
90
AdonisC4EN-Printer-F1_FM_forPaper.book Page 91 Friday, May 13, 2005 6:00 PM
Hold Print
C Start
printing from the application’s [Print] dialog box.
The Hold Print job is sent to the
machine and stored.
D On the machine’s control panel,
press the {Printer} key to display
the printer screen.
E Press [Print Jobs].
A list of a print files stored in the
machine appears.
F Press [Hold Print Job List].
A list of a print files stored in the
machine appears.
The following items also appear:
• User ID: The user ID set up by
the printer driver.
• Date / Time: The date and time
when the job was sent from the
computer.
• File Name: The name of files
stored in the machine.
G Select the file you want to print
by pressing it.
Note
❒ To select all print jobs, press [Select All Jobs].
❒ Press [UPrev.] or [TNext.] to
scroll through the list.
❒ To cancel a selection, press the
highlighted print job again. To
clear all selections, press [Clear
All].
❒ To view details about a selected
print file, press [Details].
4
H Press [Print].
The confirmation screen appears.
I Press [Yes].
The Hold Print file is printed.
Important
❒ When printing is completed, the
stored file is deleted.
Note
❒ Press [No] to cancel printing.
❒ To stop printing after printing
has started, press [Exit], and
then press [Job Reset]. The file is
deleted.
Note
❒ Depending on the security settings, certain print jobs may not
be displayed.
91
AdonisC4EN-Printer-F1_FM_forPaper.book Page 92 Friday, May 13, 2005 6:00 PM
Other Print Operations
Deleting Hold Print Files
A Press the {Printer} key to display
the Printer screen.
B Press [Print Jobs].
A list of a print files stored in the
machine appears.
C Press [Hold Print Job List].
A list of a Hold Print files stored in
the machine appears.
4
Note
❒ Depending on the security settings, certain print jobs may not
be displayed.
D Select the file you want to delete
by pressing it.
E Press [Delete].
The delete confirmation screen
will appear.
F Press [Yes] to delete the file.
After the file has been deleted, the
file list screen will return.
Note
❒ If you do not want to delete the
file, press [No].
92
AdonisC4EN-Printer-F1_FM_forPaper.book Page 93 Friday, May 13, 2005 6:00 PM
Stored Print
Stored Print
Use this function to store a file in the
machine, and then print it from the
computer or the machine's control
panel later.
Limitation
❒ A Stored Print file cannot be stored
if:
• the total number of Sample Print,
Locked Print, Hold Print, and
Stored Print files in the machine is
over 100. (The maximum number
varies depending on the volume
of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the machine
contain over 9,000 pages in total.
Note
❒ If a Stored Print file has not been
stored properly, check the error
log on the control panel (see p.104
“Checking the Error Log”).
❒ Even after you turn off the machine, stored documents remain.
However, the [Auto Delete Temporary Print Jobs] or [Auto Delete Stored
Print Jobs] settings are applied first
(see p.128 “System”).
❒ If the application has a collate option, make sure it is not selected
before sending a print job. By default, Stored Print jobs are automatically collated by the printer
driver. If a collate option is selected from the application's Print dialog box, more prints than intended
may be produced.
Printing a Stored Print File
The following procedure describes
how to print a Stored Print file with
the RPCS printer driver. For information about how to print a Stored Print
file with the PostScript 3 printer driver, see Postscript 3 supplement included as a PDF file on the supplied CDROM.
4
Limitation
❒ Applications with their own drivers, such as PageMaker, do not
support this function.
❒ If you are using Mac OS X, you need
Mac OS X v10.2 or higher to use this
function.
Reference
For details about setting printer
drivers, see Printer Driver Help.
You can also print or delete a
Stored Print file from Web Image
Monitor. For details, see Web Image Monitor Help.
Note
❒ The following procedure describes
when you select [Complete List]
from [Initial Print Job List] (see p.80
“Selecting the Initial Print Job
List”).
A Configure
Stored Print in the
printer driver’s properties.
Reference
For details about configuring
the printer drivers, see the relevant Help files.
93
AdonisC4EN-Printer-F1_FM_forPaper.book Page 94 Friday, May 13, 2005 6:00 PM
Other Print Operations
B Click [Details…], and then enter a
G Select the file you want to print
Note
❒ You can also set a password. The
same password must be entered
when printing or deleting.
Note
❒ To select all print jobs, press [Select All Jobs].
❒ If you set the password in step
B, enter the password to print.
❒ Press [UPrev.] or [TNext.] to
scroll through the list.
❒ To cancel a selection, press the
highlighted print job again. To
clear all selections, press [Clear
All].
❒ To view details about a selected
print file, press [Details].
User ID in the [User ID] box.
C Start
printing from the application’s [Print] dialog box.
The Stored Print job is sent to the
machine and stored.
D On the machine’s control panel,
press the {Printer} key to display
the printer screen.
4
E Press [Print Jobs].
by pressing it.
H Press [Print].
The confirmation screen appears.
A list of print files stored in the machine appears.
F Press [Stored Print Job List].
A list of Stored Print files stored in
the machine appears.
The following items also appear:
• User ID: The user ID set up by
the printer driver.
• Date / Time: The date and time
when the job was sent from the
computer.
• File name: The name of files
stored in the machine.
94
Note
❒ If you set a password in the
printer driver, a password confirmation screen appears. Enter
the password.
❒ If multiple files are selected, and
some of these require a password, the machine prints files
that correspond to the entered
password and files that do not
require a password. The number
of print files is displayed on the
confirmation screen.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 95 Friday, May 13, 2005 6:00 PM
Stored Print
I Enter the new number of sets using the number keys.
If you do not want to change the
set quantity, proceed to step J.
Note
❒ When multiple print files are selected, the minimum number of
set quantity among all settings
is applied.
❒ When the number of set quantity
is changed, the changed quantity
is applied to all selected print
files.
J Press [Yes].
The Stored Print file is printed.
Note
❒ Press [No] to cancel printing.
❒ To stop printing after printing
has started, press [Exit], and
then press [Job Reset]. A Stored
Print file is not deleted even if
[Job Reset] is pressed.
❒ The Stored Print file that sent to
the machine is not deleted unless you delete a file or select
[Auto Delete Stored Print Jobs] (see
p.128 “System”). For details, see
p.95 “Deleting Stored Print
Files”.
Deleting Stored Print Files
A Press the {Printer} key to display
the Printer screen.
B Press [Print Jobs].
A list of print files stored in the machine appears.
C Press [Stored Print Job List].
A list of Stored Print files stored in
the machine appears.
4
Note
❒ Depending on the security settings, certain print jobs may not
be displayed.
D Select the file you want to delete
by pressing it.
E Press [Delete].
The delete confirmation screen
will appear.
Note
❒ If multiple print files are selected, and some of these require a
password, the machine deletes
files that correspond to the entered password and files that do
not require a password. The
number of files to be deleted is
displayed on the confirmation
screen.
F Press [Yes] to delete the file.
After the file has been deleted, the
file list screen will return.
Note
❒ If you do not want to delete the
file, press [No].
❒ If you set the password in the
printer driver, enter the password to delete.
95
AdonisC4EN-Printer-F1_FM_forPaper.book Page 96 Friday, May 13, 2005 6:00 PM
Other Print Operations
Printing from List Per User ID
If you select [List Per User ID] from [Initial Print Job List] in [System] of [Printer
Features] (see ), you can select printing
files from the list of user IDs.
C Press [Job List Per User ID].
Printing the Desired Print Job
A On the Printer screen, press [Print
Jobs].
4
A list of user IDs whose files are
stored in the machine appears.
Reference
To display the Printer screen,
see p.80 “Using the Print Job
List”.
B Press the user ID whose file you
want to print.
The print job list of the selected
user ID appears.
D Select the desired print jobs.
Note
❒ To cancel a selection, press the
highlighted print job again. To
clear all selections, press [Clear
All].
E Press [Print].
The confirmation screen appears.
F Press [Yes].
The selected files are printed.
You cannot select multiple user
IDs at the same time.
Note
❒ Press [UPrev.] or [TNext.] to
scroll through the list.
❒ Press [Clear] to cancel a selection.
96
Reference
For details about printing each
type of print job, see the followings:
•
•
•
•
p.84 “Sample Print”
p.87 “Locked Print”
p.90 “Hold Print”
p.93 “Stored Print”
AdonisC4EN-Printer-F1_FM_forPaper.book Page 97 Friday, May 13, 2005 6:00 PM
Printing from List Per User ID
Printing All Print Jobs
D Select the desired print job type,
and then press [Yes].
A On the Printer screen, press [Print
Jobs].
The confirmation screen appears.
A list of user IDs whose files are
stored in the machine appears.
B Press the user ID whose file you
want to print.
You cannot select multiple user
IDs at the same time.
Note
❒ Press [UPrev.] or [TNext.] to
scroll through the list.
❒ Press [Clear] to cancel a selection.
C Press [Print All Jobs].
If the selected user ID has multiple
types of print jobs, the selection
screen of the print job type appears.
Note
❒ The confirmation screen does
not appear if the selected ID has
only one type of print jobs. Proceed to step E.
❒ You cannot select a print job
that is not stored under the selected user ID.
❒ If you select Sample Print including multiple files without
setting a quantity, 1 page less
than the minimum number of
all settings is applied.
❒ If you select Stored Print, the
number you set on the confirmation screen is applied to all
files of the selected print job
type. If you do not set a quantity, the minimum number is applied to all files.
❒ If you select Locked Print, enter
the correct password. If there
are multiple passwords, the machine prints only files that correspond to the entered password.
❒ If you select Stored Print files,
and some of these require a
password, the machine prints
files that correspond to the entered password and files that do
not require a password.
4
97
AdonisC4EN-Printer-F1_FM_forPaper.book Page 98 Friday, May 13, 2005 6:00 PM
Other Print Operations
E Press [Yes].
The selected files are printed.
Important
❒ After printing is completed, Sample Print, Locked Print, and Hold
Print files are deleted.
Reference
For details about printing each
type of print job, see the followings:
•
•
•
•
4
98
p.84 “Sample Print”
p.87 “Locked Print”
p.90 “Hold Print”
p.93 “Stored Print”
AdonisC4EN-Printer-F1_FM_forPaper.book Page 99 Friday, May 13, 2005 6:00 PM
Spool Printing
Spool Printing
Spool Printing allows print jobs transferred from a computer to be temporarily
stored, and then prints them after they are transferred. This shortens printing
time as it maximizes printer efficiency.
Important
❒ During Spool Printing, the hard disk is accessed and the Data In indicator
blinks. Turning off the computer or machine during Spool Printing can damage the hard disk. Also, if the computer or machine is turned off during Spool
Printing, spooled jobs will be deleted. Therefore, do not turn the power to the
computer or machine off during Spool Printing.
Limitation
❒ If data is sent to the machine using other protocols besides diprint, lpr, ipp,
and smb, Spool Printing cannot be performed.
❒ Up to a maximum of 150 jobs at once can be spool printed.
4
Note
❒ Printing the first page with Spool Printing will be slow.
❒ The computer requires less print processing time when large amounts of data
are spooled.
❖ Setting Spool Printing
Spool Printing can be set using telnet or Web Image Monitor.
• Using Web Image Monitor
See Network Guide or Help for more information.
• Using telnet
Type in “spoolsw spool on” to set Spool Printing.
See Network Guide for more information about telnet.
❖ Viewing a list of spool jobs on the display panel
If Spool Printing is set, a list of spooled jobs can be viewed on the display panel
screen.
Press the {Printer} key, and then press [Spooling Job List]. A list of spooled jobs
appears.
• Deleting jobs
Select files to be deleted, and then press [Delete].
Note
❒ If Spool Printing is not set, you cannot select [Spooling Job List].
❖ Viewing/Deleting spool jobs in Web Image Monitor
Start Web Image Monitor and enter the machine's IP address in the address
bar. This displays the top page.
For more information, see Network Guide.
99
AdonisC4EN-Printer-F1_FM_forPaper.book Page 100 Friday, May 13, 2005 6:00 PM
Other Print Operations
Form Feed
This section gives instructions for operating the machine when there is no
tray for the selected paper size or
type, or when paper loaded in the
machine has run out.
Limitation
❒ The tray cannot be changed if the
following functions are set for it:
• Staple
• Punch
• Duplex Print to a tray that does
not support duplex printing
• Cover Sheet
• Front and Back Covers
• Slip Sheet
4
Note
❒ If form feed is selected for a tray
with the following settings, you
can change the tray by canceling
the settings:
• Staple
• Punch
• Duplex Print
❒ If Auto Continue is selected, form
fed paper is printed after a set interval. See p.128 “System”.
If the machine does not have a tray for
the selected paper size or paper type,
or if the selected paper loaded in the
machine has run out, a caution message appears.
If this message appears, do one of the
following:
100
Print Using a Selected Tray
A Select the tray for form feed from
those that appear on the display
panel.
If you want to print after adding
paper to the tray, select the tray after loading the correct paper.
Note
❒ To load paper in the bypass tray,
see p.13 “Setting Paper on the
Bypass Tray”.
B Press [Continue].
The machine prints using the selected tray.
Note
❒ If a tray with a smaller paper size
is selected, the print job may be
cut short, or other problems may
occur.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 101 Friday, May 13, 2005 6:00 PM
Form Feed
Canceling Form Feed
A Press [Reset].
Delete the stored print jobs, and
then cancel form feed.
B Press [Reset Current Job] or [Reset
All Jobs].
Note
❒ You cannot stop printing data
that has already been processed. For this reason, printing
may continue for a few pages
after you press [Job Reset].
❒ A print job containing a large
volume of data may take considerable time to stop.
Reference
For details, see p.102 “Canceling a Print Job”.
4
• [Reset Current Job]: cancels the
print job currently being processed.
• [Reset All Jobs]: cancels all jobs
in the print queue.
• [Resume Printing]: resumes printing jobs.
A confirmation message appears.
C Press [Yes] to cancel the print job.
Note
❒ Press [No] to return to the previous display.
Important
❒ If the machine is shared by multiple computers, be careful not
to accidentally cancel someone
else's print job.
❒ Under Windows, If the machine
is connected to the computer using a parallel cable, sent print
jobs may be canceled if [Reset All
Jobs] is pressed while “Waiting...” is on the display panel.
After the interval set in [I/O Timeout] in Printer Features has
passed, the next print job can be
sent. A print job sent from a different client computer will not
be canceled in this case.
101
AdonisC4EN-Printer-F1_FM_forPaper.book Page 102 Friday, May 13, 2005 6:00 PM
Other Print Operations
Canceling a Print Job
Windows - Canceling a Print
Job
E Press
[Job Reset] on the display
panel or the {Clear/Stop} key on
the control panel.
A Double-click the printer icon on
the Windows task tray.
A window appears, showing all
print jobs currently queued for
printing. Check the current status
of the job you want to cancel.
4
B Select the name of the job you want
F Press [Reset Current Job] or [Reset
All Jobs].
to cancel.
C On the [Document] menu, click [Cancel Printing].
Note
❒ In Windows XP, Windows Server 2003, and Windows NT 4.0,
click [Cancel] on the [Document]
menu.
❒ In Windows 95 / 98 / Me / 2000
or Windows NT 4.0, you can
also open the print job queue
window by double-clicking the
machine icon in the [Printers]
machine window (the [Printers
and Faxes] window under Windows XP and Windows Server
2003).
D Press the {Printer} key on the machine's control panel.
102
• [Reset Current Job]: cancels the
print job currently being processed.
• [Reset All Jobs]: cancels all jobs
in the print queue.
• [Resume Printing]: resumes printing jobs.
A confirmation message appears.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 103 Friday, May 13, 2005 6:00 PM
Canceling a Print Job
G Press [Yes] to cancel the print job.
Note
❒ Press [No] to return to the previous display.
Important
❒ If the machine is shared by multiple computers, be careful not
to accidentally cancel someone
else's print job.
❒ If the machine is connected to
the computer using a parallel
cable, sent print jobs may be
canceled if [Reset All Jobs] is
pressed while “Waiting...” is on
the display panel. After the interval set in [I/O Timeout] in
Printer Features has passed, the
next print job can be sent. A
print job sent from a different
client computer will not be canceled in this case.
4
Note
❒ You cannot stop printing data
that has already been processed. For this reason, printing
may continue for a few pages
after you press [Job Reset].
❒ A print job containing a large
volume of data may take considerable time to stop.
103
AdonisC4EN-Printer-F1_FM_forPaper.book Page 104 Friday, May 13, 2005 6:00 PM
Other Print Operations
Checking the Error Log
If files could not be stored due to printing errors, identify the cause of the errors
by checking the error log on the control panel.
Limitation
❒ The most recent 30 errors are stored in the error log. If a new error is added
when there are 30 errors already stored, the oldest error is deleted. However,
if the oldest error belongs to one of the following print jobs, it is not deleted.
The error is stored separately until the number of those errors reaches 30. You
can check any of these print jobs for error log information.
• Sample Print
• Locked Print
• Hold Print
• Stored Print
❒ If the main power switch is turned off, the log is deleted.
4
A Press the {Printer} key to display the Printer screen.
B Press [Error Log].
An error log list appears.
C Press the desired job list.
104
AdonisC4EN-Printer-F1_FM_forPaper.book Page 105 Friday, May 13, 2005 6:00 PM
Checking the Error Log
D Press [Details].
A detailed error log appears.
❒
❒
❒
❒
Note
Press [UPrev.] or [TNext.] to scroll the error files.
Press [Exit] after checking the log.
Press [Back to List] to return to the error log list.
To print files that appear in the error log, resend them after stored files
have been printed or deleted.
4
105
AdonisC4EN-Printer-F1_FM_forPaper.book Page 106 Friday, May 13, 2005 6:00 PM
Other Print Operations
Covers
Using this function, you can insert cover and back sheets fed from a different
tray to that of the main paper, and print on them.
Reference
For printing methods, see the printer driver Help.
Limitation
❒ To use this function, Collate must be set. Rotating Collate cannot be set.
Note
❒ The cover sheets should be the same size and orientation as the body of the paper.
❒ If “Auto Tray Select” is set as the paper feed tray for the body paper, the paper
will be delivered from a tray containing paper in the K orientation. Therefore, if the cover paper is set to the L orientation, the orientation of cover and
body will be different.
4
❖ Cover Sheet
Prints the first page of the document on the sheet for the cover page.
• Print on one side
Prints on one side of the cover sheet only, even when duplex printing is selected.
AEV016S
• Print on both sides
Prints on both sides of the cover sheet when duplex printing is selected.
• Front cover printed on both sides
AEV017S
• Front cover printed on one side
AEV032S
106
AdonisC4EN-Printer-F1_FM_forPaper.book Page 107 Friday, May 13, 2005 6:00 PM
Covers
• Blank
• When printing one side
AEV018S
• When printing both sides
4
AEV033S
❖ Front and Back Covers
Prints the first and last page of the document as the cover and back cover pages.
• Print on one side
Prints on one side of the cover sheets only, even when duplex printing is
selected.
• Back cover page face inside
AEV034S
• Print on both sides
Prints on both sides of the cover sheets when duplex printing is selected.
• Front cover printed on both sides, back cover page face inside, and the
number of pages is even
AEV036S
107
AdonisC4EN-Printer-F1_FM_forPaper.book Page 108 Friday, May 13, 2005 6:00 PM
Other Print Operations
• Front cover printed on both sides, back cover page face inside, and the
number of pages is odd
AEV037S
• Front cover printed on one side, back cover page face inside, and the
number of pages is even
4
1
AEV038S
• Front cover printed on one side, back cover page face inside, and the
number of pages is odd
1
AGP009S
• Blank
• When printing one side
AEV040S
• When printing both sides
AEV041S
108
AdonisC4EN-Printer-F1_FM_forPaper.book Page 109 Friday, May 13, 2005 6:00 PM
Slip Sheet
Slip Sheet
❖ Inserting a slip sheet between each page
• Print
4
AEV019S
• Blank
AEU023S
❖ Inserting a slip sheet between OHP transparencies
• Print
AEV020S
• Blank
AEU024S
109
AdonisC4EN-Printer-F1_FM_forPaper.book Page 110 Friday, May 13, 2005 6:00 PM
Other Print Operations
Note
❒ Collate cannot be set when using slip sheets.
❒ When the duplex printing or cover printing is set, you cannot insert slip
sheets.
❒ The slip sheet should be the same size and orientation as the main paper.
❒ If “Auto Tray Select” has been set as the paper feed tray for the body paper,
the paper will be delivered from a tray containing paper in K orientation.
Therefore, when the cover paper has been set to L orientation, the orientation of the output cover paper and body paper will be different.
❒ The same paper feed tray cannot be set for the main paper and slip sheets.
4
110
AdonisC4EN-Printer-F1_FM_forPaper.book Page 111 Friday, May 13, 2005 6:00 PM
Chaptering
Chaptering
The specified page is printed on the same side as the first page, like a book. Also,
you can insert chapter slip sheets before specified pages, and select whether or
not to print on the slip sheets.
Reference
For printing methods, see the printer driver Help.
Note
❒ Up to 20 pages can be specified as the front pages of chapters using the printer
driver.
❖ No slip sheets
4
AJO025S
Note
❒ This function is only valid with duplex printing.
❒ This function can be used together with combine (layout) printing.
111
AdonisC4EN-Printer-F1_FM_forPaper.book Page 112 Friday, May 13, 2005 6:00 PM
Other Print Operations
❖ Inserting chapter slip sheets
• Print
Prints on the chapter slip sheets. When duplex printing is selected, both
sides of the slip sheets are printed on.
AJO023S
4
• Blank
AJO024S
Note
❒ The slip sheet should be the same size and orientation as the body of the
paper.
❒ If “Auto Tray Select” has been set as the paper feed tray for the body paper,
the paper will be delivered from a tray containing paper in the K orientation. Therefore, when the cover paper has been set to the L orientation, the
orientation of the output cover paper and body paper will be different.
❒ The same paper feed tray cannot be set for the body of the document and
the slip sheet.
112
AdonisC4EN-Printer-F1_FM_forPaper.book Page 113 Friday, May 13, 2005 6:00 PM
User Defined Pages
User Defined Pages
Using this function, you can specify the page numbers for each input tray.
Reference
For printing methods, see the printer driver Help.
Limitation
❒ This function is available with the PCL 6/5e printer driver only.
❒ If [Document Server] is selected under [Job Type:], User Defined Page cannot be
used.
❒ If [User Defined Pages] is selected under [Paper Selection:] on [Paper] tab, [Layout:] cannot be selected.
4
AEV044S
113
AdonisC4EN-Printer-F1_FM_forPaper.book Page 114 Friday, May 13, 2005 6:00 PM
Other Print Operations
Collate
When printing multiple documents such as handouts for meetings, you can separate sets into order. This function is known as “Collate”. Collate stores data
transmitted from a computer in memory. The following are the three types of
collate:
❖ Collate
Printed output is assembled as sets in sequential order.
4
AEU016S
❖ Rotating Collate
Every other print set is rotated by 90 degrees K.
AEU017S
❖ Shift Collate
(The optional finisher is required for this function.)
The finisher shift tray moves backward or forward when a job or set is output,
causing the next to shift, so you can separate them.
AEU018S
Limitation
❒ The optional finisher is required for Shift Collate.
❒ Rotating Collate is not possible when feeding paper from the bypass tray.
❒ If jobs containing pages of various sizes are set, Rotating Collate will not
work.
❒ The following functions cannot be combined:
• Rotating Collate and Staple
• Rotating Collate and Punch
114
AdonisC4EN-Printer-F1_FM_forPaper.book Page 115 Friday, May 13, 2005 6:00 PM
Collate
Note
❒ You can set Collate in the RPCS printer driver.
❒ If you cannot make Shift Collate even with the optional finisher installed, options may not be set up correctly in the printer driver. Correct the printer driver's
option settings. For details, see the printer driver Help.
❒ If Auto Continue occurs on the first set, Collate will be canceled.
❒ If forced printing occurs on the first set, Collate will be canceled.
❒ If a document with mixed paper sizes or sizes larger than A4, 81/2 × 11 is set,
it can only be collated, even if Rotating Collate has been selected.
❒ If the following functions are selected, Collate or Shift Collate will be applied
even if Rotating Collate is selected:
• Covers
• Slip Sheet
❒ When Rotating Collate has been selected, printing speed will be slower than
with other collate functions.
❒ When setting Collate in the printer driver settings, make sure that a collate
option is not selected in the application's print settings. If a collate option is
selected, printing will not be as intended.
❒ The Rotating Collate function requires two paper trays containing same size
paper but in different orientations.
4
Reference
For information about paper sizes and the number of sets you can use Collate,
Rotating Collate, and Shift Collate with in every option, see Copy Reference.
For printing methods, see the printer driver Help.
115
AdonisC4EN-Printer-F1_FM_forPaper.book Page 116 Friday, May 13, 2005 6:00 PM
Other Print Operations
Printing with the Finisher
You can collate, staple, or punch holes in printed paper by installing the optional
finisher. Make sure you read the following precautions when using the optional
finisher:
Reference
For information about optional finishers, see General Settings Guide.
To use the staple function, see p.117 “Staple”.
To use the punch function, see p.120 “Punch”
❖ Be sure to make settings for options installed on the machine in the printer drivers.
4
Reference
To make settings for options in the printer drivers, see p.54 “Making Option Settings for the Printer”.
❖ Be sure to set the paper size and paper orientation in the printer driver when using
duplex printing, booklet, combine (layout), staple and punch functions.
Reference
For details about duplex printing, booklet, and layout, see the printer driver
Help.
To use the staple function, see p.117 “Staple” and the printer driver Help.
To use the punch function, see p.120 “Punch” and the printer driver help.
Note
❒ Depending on the application, print settings may not be enabled and printed
output may not be as expected.
❖ When setting staple or collate in the printer driver, make sure that the Collate check
box is cleared in the application's [Print] dialog box.
If Collate is enabled in the application, printing will not be as intended.
116
AdonisC4EN-Printer-F1_FM_forPaper.book Page 117 Friday, May 13, 2005 6:00 PM
Printing with the Finisher
Staple
With the optional finisher installed, sets can be stapled individually when printing multiple sets.
Staple Position
The specified staple position varies depending on paper size, type, quantity and
feed orientation. The following table shows staple positions:
4
AJM008S
Reference
• For paper sizes and maximum numbers of sheets available for stapling, see
“Specifications”, General Settings Guide.
• For printing methods, see the printer driver Help.
• The staple position will vary when using the PostScript 3 printer driver.
For more information, see the PostScript 3 printer driver Help.
117
AdonisC4EN-Printer-F1_FM_forPaper.book Page 118 Friday, May 13, 2005 6:00 PM
Other Print Operations
Stapling Precautions
Limitation
❒ Stapling can be done only with the optional finisher installed.
❒ Stapling cannot be done when paper is fed from the bypass tray.
❒ You cannot interrupt the current job with a job for another function requiring
stapling or collating.
❒ When printing on letterhead, stapling may not be at the specified position.
Note
❒ When the finisher is installed, and when an output tray that cannot output using the staple function has been selected, the paper will be output according
to System Settings.
❒ If you cannot make staple settings even with the finisher installed, options
may not be set correctly in the printer driver. Correct option settings in the
printer driver. For details, see the printer driver Help.
❒ When duplex printing is selected, adjust staple positions to the binding orientation.
❒ When the finisher is being used for another function's job (for example, a copy
job), printing will start after that job ends.
❒ When setting Staple in the printer driver settings, make sure that a collate option is not selected in the print settings of the application. If a collate option is
selected in the application, printing will not be as intended.
❒ Be sure to set paper size and orientation in the printer driver when stapling.
• Depending on the software you are using, print settings may not be saved
and the printed result may not be as expected.
❒ When printing restarts after removing jammed paper, the printing position
may be different, depending on the location of the jam.
• If the paper jam occurred in the optional finisher, printing will restart from
the top page of the data currently being printed, or from the page where
the paper jam occurred.
• If the paper jam occurred in the machine, printing will restart from the
page where the paper jam occurred.
❒ Even if the paper jam occurred in the machine, the error will not be cleared
unless the cover of the finisher is opened and closed.
4
118
AdonisC4EN-Printer-F1_FM_forPaper.book Page 119 Friday, May 13, 2005 6:00 PM
Printing with the Finisher
❒ Staple printing will be canceled under the following conditions:
• If the number of staple jobs exceeds maximum. For information about the
maximum number, see “Specifications”, General Settings Guide.
• If a paper size that cannot be stapled is selected. For information about paper sizes that can be stapled, see “Specifications”, General Settings Guide.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in the duplex mode and
the staple position.
• If paper sizes are mixed when a different paper size is specified during a
print job.
• When staples have run out.
• When feeding paper from the bypass tray.
• When staples have run out and Auto Continue is set, printing will continue
without stapling after the message has been displayed.
❒ When using the optional 2 Tray Finisher or Booklet Finisher, following paper
sizes can be stapled using the Mixed Size mode:
• A3 L and A4 K
• B4 L and B5 K
• 11 × 17 L and 8 1/2 × 11 K
4
119
AdonisC4EN-Printer-F1_FM_forPaper.book Page 120 Friday, May 13, 2005 6:00 PM
Other Print Operations
Punch
With the optional 2 Tray Finisher installed, holes can be punched into printed
output.
Punch Position
The specified punch position varies depending on paper feed and print data orientation. The following table shows punch positions:
4
AEV031S
Note
❒ Punch positions will vary slightly from page to page as holes are punched
into each sheet individually.
Reference
For information about paper sizes that can be punched, see “Specifications”,
General Settings Guide.
For printing methods, see the printer driver Help.
The punch position will vary when using the PostScript 3 printer driver. For
details, see the PostScript 3 printer driver Help.
120
AdonisC4EN-Printer-F1_FM_forPaper.book Page 121 Friday, May 13, 2005 6:00 PM
Printing with the Finisher
Punching Precautions
Limitation
❒ Punching cannot be done when paper is fed from the bypass tray.
Note
❒ If you cannot make punch settings even with the optional 2 Tray Finisher installed, options may not be set correctly in the printer driver. Correct option
settings in the printer driver. For details, see the printer driver Help.
❒ When duplex printing is selected, adjust punch positions according to binding orientation.
❒ Be sure to set the punch position the same as the staple position when using
it with the staple function.
❒ Be sure to set paper size and orientation in the printer driver when punching.
• Depending on the software you are using, print settings may not be enabled and the printed result may not be as expected.
❒ Punch will be canceled under the following conditions:
• When a paper size that cannot be punched is selected. For information
about paper sizes that can be punched, see “Specifications”, General Settings Guide.
• If positions other than those fixed for punching are specified.
• If there are inconsistencies between the orientation in duplex mode and the
punch position.
• When feeding paper from the bypass tray.
• When the punch receptacle has become full and Auto Continue is set,
printing will continue without punching after the message appears.
4
121
AdonisC4EN-Printer-F1_FM_forPaper.book Page 122 Friday, May 13, 2005 6:00 PM
Other Print Operations
4
122
AdonisC4EN-Printer-F1_FM_forPaper.book Page 123 Friday, May 13, 2005 6:00 PM
5. Printer Features
Reference
For more information about copier features and system settings, see Copy Reference and General Settings Guide.
Printer Features Menu
There are seven menu items in the Printer Features menu:
• List / Test Print
• Maintenance
• System
• Host Interface
• PCL Menu
• PS Menu (optional)
• PDF Menu (optional)
You can select the functions in the following table:
Menu
Default
List / Test Print
Multiple Lists
See p.126 “List / Test
Print”.
Config. Page
Error Log
Menu List
PCL Config. / Font Page
PS Config. / Font Page *1
PDF Config. / Font Page *1
Hex Dump
Maintenance
Menu Protect
See p.128 “Maintenance”. List / Test Print Lock
Delete All Temporary Print Jobs
Delete All Stored Print Jobs
System
Print Error Report
See p.128 “System”.
Auto Continue
Memory Overflow
Job Separation
*2
Auto Delete Temporary Print Jobs
Auto Delete Stored Print Jobs
Initial Print Job List
123
AdonisC4EN-Printer-F1_FM_forPaper.book Page 124 Friday, May 13, 2005 6:00 PM
Printer Features
Menu
Default
System
Memory Usage
See p.128 “System”.
Duplex
Copies
Blank Page Print
Edge Smoothing
Toner Saving
Printer Language *1
Sub Paper Size
Page Size
Letterhead Setting
Bypass Tray Setting Priority
Edge to Edge Print
5
Default Printer Language *1
Tray Switching
Host Interface
I/O Buffer
See p.132 “Host Interface”.
I/O Timeout
PCL Menu
Orientation
See p.132 “PCL Menu”.
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Courier Font
Extend A4 Width
Append CR to LF
Resolution
PS Menu (optional)
Data Format
*1
See p.134 “PS Menu”.
PDF Menu (optional)
Resolution
*1
See p.134 “PDF Menu”.
Change PDF Password
PDF Group Password
Resolution
*1
*2
124
Appears when the PostScript 3 unit (optional) is installed.
Appears when a finisher (optional) is installed.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 125 Friday, May 13, 2005 6:00 PM
Adjusting Printer Features
Adjusting Printer Features
Printer Features allows basic adjustment of operations when using the machine
as a printer.
Although factory default settings are suitable for most printing jobs, Printer Features gives you access to a number of settings that control basic printer operations. Printer Features settings you make are retained even when you turn off
the machine.
For more information about copier features and system settings, see Copy Reference and General Settings Guide.
A Press the {User Tools/Counter} key on the control panel.
B Press [Printer Features].
C Select the desired item by pressing the tab, and then change its settings.
5
Note
❒ [OK]: Press to make new settings and go back to previous menus.
❒ [Cancel]: Press to return to a previous menu without changing any setting.
D After changing Printer Features settings, press [Exit] to return to the User
Tools / Counter menu.
Note
❒ You can also exit from the User Tools / Counter menu by pressing the {User Tools/Counter} key.
❒ Changes made to functions remain in effect even if the machine is turned
off.
❒ You can also exit from the Printer Features menu by pressing [Exit] in the
main menu.
125
AdonisC4EN-Printer-F1_FM_forPaper.book Page 126 Friday, May 13, 2005 6:00 PM
Printer Features
Printer Features Parameters
List / Test Print
❖ Multiple Lists
You can print the configuration
page and error log.
❖ Config. Page
You can print the machine's current configuration values.
Reference
For details, see p.126 “Printing
the configuration page”.
5
❖ Error Log
You can print error logs listing all errors that occurred during printing.
The most recent 30 errors are
stored in the error log. If a new error is added when there are 30 errors already stored, the oldest error
is deleted. However, if the oldest
error belongs to one of the following print jobs, it is not deleted. The
error is stored separately until the
number of those errors reaches 30.
You can check any of these print
jobs for error log information.
• Sample Print
• Locked Print
• Hold Print
• Stored Print
The records of Auto Job Cancel
and jobs canceled manually from
the control panel can be printed.
❖ Menu List
You can print a Menu List showing
the machine's function menus.
❖ PCL Config. / Font Page
You can print the current configuration and installed PCL font list.
126
❖ PS Config. / Font Page
You can print the current configuration and installed PostScript font
list.
Note
❒ This menu can be selected only
when the optional PostScript 3
unit is installed.
❖ PDF Config. / Font Page
You can print the current configuration and installed PDF font list.
Note
❒ This menu can be selected only
when the optional PostScript 3
unit is installed.
❖ Hex Dump
You can print in the Hex Dumpmode.
Printing the configuration page
A Press the {User Tools/Counter} key
on the control panel.
The User Tools / Counter menu appears.
B Press [Printer Features].
The Printer Features menu appears.
C Press
[Config. Page] on the [List /
Test Print] tab.
The configuration page is printed.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 127 Friday, May 13, 2005 6:00 PM
Printer Features Parameters
Interpreting the configuration page
❖ System Reference
• Unit Number
Displays the serial number assigned to the board by its manufacturer.
• Total Memory
Displays the total amount of
memory (SDRAM) installed on
the printer.
• Firmware Version
• Printer
Displays the version number
of the printer firmware.
• System
Displays the version number
of the system firmware.
• Engine
Displays the version number
of the printer engine.
• LCDC
Displays the version number
of the panel display.
• NIB
Displays the version number
of the Network interface.
• Device Connection
This item(s) appears when the
device option(s) is installed.
• HDD: Font / Macro Download
Displays the capacity of the
hard disk drive.
• Printer Language
Displays the version number of
the printer driver language.
• Connection Equipment
Displays the installed optional
equipments.
❖ Paper Input
Displays settings made under Tray
Paper Settings menu.
❖ System
Displays settings made under the
System menu.
Reference
For details, see p.128 “System”.
❖ PCL Menu
Displays settings made under PCL
Menu.
Reference
For details, see p.132 “PCL
Menu”.
❖ PS Menu
Displays settings made under PS
Menu.
5
Reference
For details, see p.134 “PS
Menu”.
❖ PDF Menu
Displays settings made under PDF
Menu.
Reference
For details, see p.134 “PDF
Menu”.
❖ Host Interface
Displays settings made under the
Host Interface menu.
When DHCP is active on the network, the actual IP address, subnet
mask and gateway address appear
in parentheses on the configuration page.
Reference
For details, see p.132 “Host Interface”.
❖ Interface Information
Displays the interface information.
127
AdonisC4EN-Printer-F1_FM_forPaper.book Page 128 Friday, May 13, 2005 6:00 PM
Printer Features
5
Maintenance
System
❖ Menu Protect
This procedure lets you protect
menu settings from accidental
change. It makes it impossible to
change menu settings with normal
procedures unless you perform the
required key operations. In a network environment, only administrators can make changes to menu
settings.
• Level 1
You can protect “Maintenance”,
”System”, “Host Interface”,
“PCL Menu”, “PS Menu” and
“PDF Menu”.
• Level 2
You can protect “Maintenance”,
”System”, “Host Interface”,
“PCL Menu”, “PS Menu”, “PDF
Menu” and “Page Size” in the
System menu.
• Off
❖ Print Error Report
Select this to have an error report
printed when a printer or memory
error occurs.
• On
• Off
Note
❒ Default: Level 2
❒ You can protect menu settings
using a Web Image Monitor.
❖ List / Test Print Lock
You can lock the [List / Test Print]
menu.
• On
• Off
Note
❒ Default: Off
❖ Delete All Temporary Print Jobs
You can delete all print jobs temporarily stored in the machine.
❖ Delete All Stored Print Jobs
You can delete all print jobs stored
in the machine.
128
Note
❒ Default: Off
❖ Auto Continue
You can select this to enable Auto
Continue. When it is On, printing
continues after a system error occurs.
• Off
• Immediate
• 1 minute
• 5 minutes
• 10 minutes
• 15 minutes
Note
❒ Default: Off
❖ Memory Overflow
Select this to have a memory overflow error report printed.
• Do not Print
• Error Information
Note
❒ Default: Do not Print
AdonisC4EN-Printer-F1_FM_forPaper.book Page 129 Friday, May 13, 2005 6:00 PM
Printer Features Parameters
❖ Job Separation
You can enable Job Separation.
• On
• Off
Note
❒ Default: Off
❒ This menu can be selected only
when a finisher (optional) is installed.
❖ Auto Delete Temporary Print Jobs
You can select to automatically delete print jobs temporarily stored
in the machine.
• On
• Off
Note
❒ Default: Off
❒ If you select On, you can set up to
200 hours for auto file deleting.
❖ Auto Delete Stored Print Jobs
You can select to automatically delete print jobs stored in the machine.
• On
• Off
Note
❒ Default: On (3 days)
❒ If you select On, you can set up to
180 days for auto file deleting.
❖ Initial Print Job List
You can set the desired type of
print job list that appears on the
screen when you press [Print Jobs].
• Complete List
Displays the list of print jobs
stored in the machine.
• List Per User ID
Displays the list of the User ID
who stored a file in the machine.
Note
❒ Default: Complete List
❖ Memory Usage
You can select the amount of memory used in Font Priority or Frame
Priority, according to paper size or
resolution.
• Font Priority
This setting uses memory for
registering fonts.
• Frame Priority
This setting uses frame memory
for high speed printing.
Note
❒ Default: Frame Priority
❖ Duplex
You can select to have print on
both sides of each page.
• Off
• Long Edge Bind
• Short Edge Bind
5
Note
❒ Default: Off
❖ Copies
You can specify the number of
print sets. This setting is disabled if
the number of pages to print has
been specified with the printer
driver or another command.
• 1 to 999 by 1
Note
❒ Default: 1
129
AdonisC4EN-Printer-F1_FM_forPaper.book Page 130 Friday, May 13, 2005 6:00 PM
Printer Features
5
❖ Blank Page Print
You can select whether or not to
print blank pages.
• On
• Off
Pages that match one of the following conditions are identified as
blank.
• There are no images.
• There are images but they are
outside of the printable area.
• There are only blank characters.
❖ Printer Language
You can specify the printer language.
• Auto
• PCL
• PS
• PDF
Note
❒ Default: On
❒ The printer does not identify
pages with white-coloured images as blank.
❖ Sub Paper Size
You can enable the Auto Substitute
Paper Size (A4↔LT) feature.
• Auto
• Off
❖ Edge Smoothing
You can set to smoothen the edges
of printed characters.
• On
• Off
Note
❒ Default: On
❒ If you print either photo or halftone graphic images, select Off.
❖ Toner Saving
You can save a toner.
• On
• Off
Note
❒ Default: Off
130
Note
❒ Default: Auto
❒ This menu appears only when
the PostScript 3 unit (optional)
is installed.
Note
❒ Default: Off
❖ Page Size
You can select the default paper size.
• 11 × 17
• 81/2 × 14
• 81/2 × 11
• 51/2 × 81/2
• 71/4 × 101/2
• 8 × 13
• 81/2 × 13
• 81/4 × 13
• A3
• B4 JIS
• A4
• B5 JIS
• A5
• A6
• Custom Size
Note
❒ Default:
• Metric version: A4
• Inch version: 81/2 × 11
AdonisC4EN-Printer-F1_FM_forPaper.book Page 131 Friday, May 13, 2005 6:00 PM
Printer Features Parameters
❖ Letterhead Setting
You can rotate original images
when printing.
When printing, original images are
always rotated by 180 degrees.
Therefore, output might not be as
expected when printing onto letterhead or preprinted paper requiring orientation. Using this
function, you can specify image rotation.
• Off
• Auto Detect
• On (Always)
Note
❒ Default: Off
❒ When set to Off, original images
are rotated by 180 degrees.
❒ When set to Auto Detect, the
machine detects a letterhead or
preprinted paper automatically,
and does not rotate them.
❒ When set to On (Always), the
machine does not rotate.
❒ This function reduces printing
speed.
❖ Bypass Tray Setting Priority
You can specify which of the two
options, (Printer) Driver / Command or Machine Settings, has priority for determining the paper
size for the bypass tray.
• Driver / Command
• Machine Settings
❖ Edge to Edge Print
You can select whether or not to
print on the entire sheet.
• Off
• On
Note
❒ Default: Off
❒ The 5 mm margin along the edges may not be printed properly.
❖ Default Printer Language
You can set the default printer language if the machine cannot find
the printer language automatically.
• PCL
• PS
• PDF
5
Note
❒ Default: PCL
❒ This menu appears only when
the PostScript 3 unit (optional)
is installed.
❖ Tray Switching
You can set to switch the paper
tray.
• Off
• On
Note
❒ Default: Off
Note
❒ Default: Driver / Command
131
AdonisC4EN-Printer-F1_FM_forPaper.book Page 132 Friday, May 13, 2005 6:00 PM
Printer Features
Host Interface
PCL Menu
❖ I/O Buffer
You can set the size of the I/O
Buffer. Normally it is not necessary to change this setting.
• 128 KB
• 256 KB
❖ Orientation
You can set the page orientation.
• Portrait
• Landscape
Note
❒ Default: 128 KB
❖ I/O Timeout
You can set how many seconds the
machine should wait before ending a print job. If data from another
port usually arrives in the middle
of a print job, you should increase
this timeout period.
• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
• 60 seconds
5
Note
❒ Default: 15 seconds
Note
❒ Default: Portrait
❖ Form Lines
You can set the number of lines per
page.
• 5 to 128 by 1
Note
❒ Default:
• Metric version: 64
• Inch version: 60
❖ Font Source
You can set the storage location of
the default font.
• Resident
• RAM
• HDD
• SD
Note
❒ Default: Resident
❒ RAM, HDD and SD can be selected only when fonts have
been downloaded to the machine.
❖ Font Number
You can set the ID of the default
font you want to use.
• 0 to 63 by 1
Note
❒ Default: 0
132
AdonisC4EN-Printer-F1_FM_forPaper.book Page 133 Friday, May 13, 2005 6:00 PM
Printer Features Parameters
❖ Point Size
You can set the point size you want
to use for the selected font.
• 4.00 to 999.75 by 0.25
Note
❒ Default: 12.00
❒ This setting is effective only with
variable-space fonts.
❖ Font Pitch
You can set the number of characters per inch for the selected font.
• 0.44 to 99.99 by 0.01
Note
❒ Default: 10.00
❒ This setting is effective only with
fixed-space fonts.
❖ Symbol Set
You can specify the set of print
characters for the selected font.
The available options are as follows:
Roman-8, ISO L1, ISO L2, ISO L5,
PC-8, PC-8 D/N, PC-850, PC-852,
PC8-TK, Win L1, Win L2, Win L5,
Desktop, PS Text, VN Intl, VN US,
MS Publ, Math-8, PS Math, VN
Math, Pifont, Legal, ISO 4, ISO 6,
ISO 11, ISO 15, ISO 17, ISO 21, ISO
60, ISO 69, Win 3.0
❖ Extend A4 Width
You can extend the printing area
width (when printing on A4 sheet
with PCL).
• Off
• On
Note
❒ Default: Off
❒ When the setting is On, the width
will be 8 1/2 inches.
❖ Append CR to LF
When set to On, a carriage return
will follow each line feed: CR=CR,
LF=CR−LF, FF=CR−FF.
• Off
• On
5
Note
❒ Default: Off
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
Note
❒ Default: PC-8
❖ Courier Font
You can select a courier font type.
• Regular
• Dark
Note
❒ Default: Regular
133
AdonisC4EN-Printer-F1_FM_forPaper.book Page 134 Friday, May 13, 2005 6:00 PM
Printer Features
PS Menu
PDF Menu
This menu appears only when the optional PostScript 3 unit is installed.
This menu appears only when the optional PostScript 3 Unit is installed.
❖ Data Format
You can select a data format.
• Binary Data
• TBCP
❖ Change PDF Password
Set the password for the PDF file
executing PDF Direct Print.
• Current Password
• New Password
• Confirm New Password
A password can be set using on the
Web Image Monitor, but in this case
the password information is sent
through the network. If security is a
priority, set the password using this
menu from the Control Panel.
Limitation
❒ This setting is not effective when
operating the machine with a
parallel or EtherTalk connection.
❒ When operating the machine with
a parallel connection, and also if
the binary data is sent from the
printer driver, the print job is canceled.
❒ When operating the machine with
an Ethernet connection, the print
job is canceled under the following conditions;
• The printer driver data format is TBCP, and the data
format selected on the display panel is Binary Data.
• The printer driver data format is binary, and the data
format selected on the display panel is TBCP.
5
Note
❒ Default: TBCP
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
134
Note
❒ Default: Not Set
❖ PDF Group Password
Set the group password already
specified with DeskTopBinder
Lite.
• Current Password
• New Password
• Confirm New Password
A password can be set using on the
Web Image Monitor, but in this
case the password information is
sent through the network. If security is a priority, set the password
using this menu from the Control
Panel.
Note
❒ Default: Not Set
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
AdonisC4EN-Printer-F1_FM_forPaper.book Page 135 Friday, May 13, 2005 6:00 PM
6. Using the Document Server
Accessing the Document Server
The Document Server enables you to store documents on the machine's hard
disk, allowing you to edit and print as and when you want.
Limitation
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
Reference
For more information about Document Server functions, see General Settings
Guide.
For information about how to access Document Server from a client, see the
printer driver Help.
Note
❒ When you use the Document Server, the following functions can be selected
using the machine's control panel:
• Copies
• Collate
• Duplex
• Staple
• Paper selection: Paper source tray, paper type, paper output tray.
• Functions related to paper selection: Cover Sheet, Slip Sheet.
❒ The above items are dimmed, so you cannot set them from the printer properties dialog box when the Document Server is selected.
❒ You must enter a user ID, using up to eight alphanumeric characters.
❒ You should enter a Password and File Name to distinguish the job from others.
❒ Up to 3,000 files can be stored in the Document Server. No new files can be
stored after 3,000 is reached. Even if less than 3,000 files are stored, new files
cannot be stored when
• a file to be stored contains more than 1,000 pages,
• the total number of pages contained in files stored exceeds 9,000,
• the hard disk is full.
❒ The Document Server also stores files scanned using the Automatic Document Feeder (ADF) or exposure glass. You should delete unnecessary stored
files once in a while so as not to exceed the capacity of the hard disk. For how
to delete stored files, see General Settings Guide.
❒ When using the hard disk for functions other than those of Document Server,
you may be unable to store new files in the Document Server, even if there are
less than 3,000 files stored.
135
AdonisC4EN-Printer-F1_FM_forPaper.book Page 136 Friday, May 13, 2005 6:00 PM
Using the Document Server
6
136
AdonisC4EN-Printer-F1_FM_forPaper.book Page 137 Friday, May 13, 2005 6:00 PM
7. The Functions and Settings
of the Machine
Mainframe
Network Guide, PostScript 3 Supplement, and UNIX Supplement cover all models, and therefore contain all the functions and settings. This chapter describes
the functions and setting items used for configuring the model you are using.
Reference
For details about functions and setting items, see Network Guide, PostScript 3
Supplement and UNIX Supplement.
Functions
The following functions are available with the machine:
• Copy
• Printer
• Scanner
• Fax
• Document Server
Note
❒ The machine must be equipped with the Printer/Scanner Unit in order to use
the printer or scanner function.
Interface
The following interfaces are available with the machine:
• Ethernet (100BASE-TX / 10BASE-T)
• USB (2.0 / 1.1)
• IEEE 1284 (Parallel)(Optional)
• IEEE 1394 (SCSI print)(Optional)
• IEEE 802.11b (Wireless LAN)(Optional)
• Bluetooth(Optional)
Note
❒ To use the IEEE 1284, IEEE 1394 (SCSI print), IEEE 802.11b (wireless LAN), or
Bluetooth interface, the machine must be equipped with the corresponding
unit for that interface.
❒ You cannot have the IEEE 1284, IEEE 1394 (SCSI print), IEEE 802.11b (wireless
LAN), and Bluetooth interface on the machine at the same time.
137
AdonisC4EN-Printer-F1_FM_forPaper.book Page 138 Friday, May 13, 2005 6:00 PM
The Functions and Settings of the Machine
List of the Setting Items
Web Image Monitor
The following are the items of Web Image Monitor available with the machine:
R : Read
W : Write
 : None
Note
❒ Depending on the security settings, certain items may not be displayed.
Menu
Before login
After login as
Admin.
Top Page
R
R
Reset Printer Job

RW

RW
Input Tray
R
R
Output Tray
R
R
Toner
R
R
Reset Device
Status
7
Function
R
R
System
R
R
Counter
R
R
Printer Language
R
R
Document Server
RW
RW
Fax Received File
RW

R
R
Job
Printer
Fax History
Job History
Error Log
R
R
Print Jobs
RW
RW
Transmission
R
R
Reception
R
R
LAN-Fax
Document Server
138
R
R
RW
RW
Address Book

RW
Inquiry
R
R
AdonisC4EN-Printer-F1_FM_forPaper.book Page 139 Friday, May 13, 2005 6:00 PM
List of the Setting Items
Menu
Configuration
Device Settings
Before login
After login as
Admin.
System
R
RW
Paper
R
RW
Date/Time
R
RW
Timer
R
RW
E-mail
R
RW
On-demand E-mail
Notification

RW
File Transfer

RW
User Authentication
Management

RW
Administrator Authen- 
tication Management
RW
Program/Change Ad- 
ministrator
RW

RW
R
RW
General

RW
Administrator Tools

RW
E-mail Settings

RW
IP-Fax Settings

RW
Gateway Settings

RW
Parameter Settings

RW
R
RW
TCP/IP
R
RW
NetWare
R
RW
LDAP Server
Printer
Fax
Interface
Network
RW
Auto E-mail Notification 
AppleTalk
R
RW
SMB
R
RW
SNMP

RW
SNMPv3

RW
SSDP

RW
Rendezvous
R
RW
System Log
R
R
7
139
AdonisC4EN-Printer-F1_FM_forPaper.book Page 140 Friday, May 13, 2005 6:00 PM
The Functions and Settings of the Machine
Menu
Configuration
Security
RC Gate
Webpage
Before login
After login as
Admin.
Network Security

RW
Access Control

RW
IPP Authentication

RW
SSL/TLS

RW
Certificates

RW
Setup RC Gate

RW
Update RC Gate
Firmware

RW
RC Gate Proxy

RW
RW
RW
telnet
The following telnet can be used with the machine:
access, appletalk, autonet, btconfig, dhcp, diprint, dns, domainname, help, hostname,
ifconfig, info, ipp, netware, passwd, prnlog, rendezvous, route, set, show, slp, smb,
snmp, spoolsw, ssdp, status, syslog, web, wins
7
140
AdonisC4EN-Printer-F1_FM_forPaper.book Page 141 Friday, May 13, 2005 6:00 PM
List of the Setting Items
UNIX
The following UNIX commands can be used with the machine:
Device Option
Value
Function Summary
binding
right, shortedge, top, left,
longedge
Specifies the binding direction for
duplex printing.
copies
Number of copies (1 - 999)
Specifies the number of copies.
duplex
on, off
Specifies whether duplex printing
is on or off.
filetype
pcl, postscript (rps)
Specifies the printer language for
printing.
filter
text
Specifies the text printing.
mediatype
plain, recycled, special, thick,
transparency, color, letterhead,
preprinted, prepunched, labels,
bond, cardstock, plainorrecycled
Specifies the paper type.
orientation
landscape, portrait
Specifies the feed direction of the
paper.
outbin
inner, lower, optionaloutputbin,
finishershift, finisherproof,
finisherbooklet, sequentialstack,
upper
Specifies the output tray.
paper
a3, jisb4, a4, jisb5, a5, a6, ledger,
legal, letter, halfletter, executive,
fgl, foolscap, folio, custom
Specifies the paper size.
punch
off, leftport, leftland, topport,
topland, rightport, rightland
Specifies the punch position.
qty
Number of collated sets (1 - 999)
Specifies the number to collate.
resolution
value of resolution (200, 300, 600)
Specifies the resolution for printing.
staple
off, lefttopslantport, lefttopslantland, Specifies the staple position.
lefttopvertport, lefttopvertland,
left2port, left2land, right2port,
right2land, righttopvertport,
righttopvertland, righttopslantport,
righttopslantland, righttophorizport,
righttophorizland, top2port, top2land,
lefttophorizport, lefttophorizland,
booklet, lefttop, righttop,
tray
all, tray1, tray2, tray3, tray4, bypass, Specifies the input tray.
lct
7
141
AdonisC4EN-Printer-F1_FM_forPaper.book Page 142 Friday, May 13, 2005 6:00 PM
The Functions and Settings of the Machine
Settings that can be used with PostScript 3
The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
Settings
7
142
Selectable Items
Collate
Off, On
Dithering
Auto, Photographic, Text, User Setting
Duplex
Off, Open to Left, Open to Top
Fit to Print Size
Prompt User, Nearest Size and Scale, Nearest Size and Crop
Image Smoothing
Off, On, Auto, Less than 90 ppi, Less than 150 ppi,
Less than 200 ppi, Less than 300 ppi
Input Tray
AutoSelect Tray, Bypass Tray, Tray 1, Tray 2, Tray 3, Tray 4,
Large Capacity Tray
Output Tray
Printer Default, Internal Tray 1, Internal Tray 2,
Finisher Upper Tray, Finisher Shift Tray, Finisher Shift Tray 1,
Finisher Shift Tray 2
Resolution
600 dpi
Size
See General Setting Guide.
Staple
Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top, 2 at Center
Edge Smoothing
On, Off
Toner Saving
On, Off
Type
See General Setting Guide.
Paper Selection
Same Paper for All pages, Different Paper for First Page,
Use Slip Sheet, Chaptering
Punch
Off, 2 at Left, 2 at Right, 2 at Top, 3 at Left, 3 at Right, 3 at Top,
4 at Left, 4 at Right, 4 at Top
AdonisC4EN-Printer-F1_FM_forPaper.book Page 143 Friday, May 13, 2005 6:00 PM
8. Appendix
Software and Utilities Included on the CDROM
Three CD-ROMs come with this printer: “Printer Drivers and Utilities”, “Operating Instructions”, and “Scanner Driver and Document Management Utility”.
The following are included in the three separate CD-ROMs.
❖ Font Manager 2000
For installing new screen fonts, or organizing and managing fonts already in
the system. For details about Font Manager 2000, see the manual on the CDROM labeled “Printer Drivers and Utilities”.
❖ SmartDeviceMonitor for Admin
For the system administrator to manage network printers.
Reference
SmartDeviceMonitor for Admin Help
❖ SmartDeviceMonitor for Client
For users to manage their network print status.
Reference
SmartDeviceMonitor for Client Help
❖ 1394 Utility
For the optional IEEE 1394 interface unit. For details, see the Readme file or
the manual provided with the optional IEEE 1394 interface unit.
❖ USB Printing Support
For connection to Windows 98 SE / Me computers via USB.
❖ Acrobat Reader
This utility allows you to read PDF files (Portable Document Format).
Note
❒ Documentation about using the machine is included on the CD-ROM in
PDF format. For details about using Acrobat Reader, see Acrobat Reader
online Help.
❖ Printer Utility for Mac
This utility allows users to download and manage a variety of fonts as well as
manage printers. For details about this utility, see PostScript Supplement.
143
AdonisC4EN-Printer-F1_FM_forPaper.book Page 144 Friday, May 13, 2005 6:00 PM
Appendix
Viewing the contents of the CD-ROM
Follow the procedure below to view the contents of the CD-ROM.
A Insert the CD-ROM into the CD-ROM drive.
The installer starts.
B Click [Browse This CD-ROM].
Explorer starts and displays the contents of the CD-ROM.
Printer Drivers for This Printer
Printing requires installing a printer driver appropriate to your operating system.
The following drivers are included in the supplied CD-ROM with this machine.
Printer Language
PCL 6
PCL 5e
RPCS
PostScript 3
*1
OK
OK
OK
OK *12
Windows 98 *2
OK
OK
OK
OK *12
OK
OK
OK
OK *12
OK
OK
OK
OK *13
Windows XP *5
OK
OK
OK
OK *13
Windows Server 2003 *6
OK
OK
OK
OK *13
OK *11
OK *10
OK *10
Windows 95
Windows Me *3
Windows 2000
*4
Windows NT 4.0 *7
8
*12
Mac OS *8



OK *12
Mac OS X *9



OK *14
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
*12
*13
*14
144
OK *11
Microsoft Windows 95 operating system
Microsoft Windows 98 operating system
Microsoft Windows Millennium Edition
Microsoft Windows 2000 Advanced Server
Microsoft Windows 2000 Server
Microsoft Windows 2000 Professional
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows Server 2003 Standard Edition
Microsoft Windows Server 2003 Enterprise Edition
Microsoft Windows NT Server operating system version 4.0, Microsoft Windows NT
Workstation operating system version 4.0 in a computer using x86 processors.
Versions 8.6 to 9.2 of the Mac OS (Mac OS X Classic mode is supported.)
Mac OS X 10.1 or later (Native mode)
Requires Service Pack 4 or later.
Requires Service Pack 6 or later.
The Adobe PostScript 3 printer drivers and PostScript Printer Description (PPD) files
are included on the CD-ROM labeled “Printer Drivers and Utilities”.
The PostScript Printer Description (PPD) files are included on the CD-ROM labeled
“Printer Drivers and Utilities”.
The Adobe PostScript Printer Description (PPD) installer is included on the CDROM labeled “Printer Drivers and Utilities”.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 145 Friday, May 13, 2005 6:00 PM
Software and Utilities Included on the CD-ROM
❖ PCL printer drivers
Two kinds of PCL printer driver (PCL 5e and PCL 6) are included on the CDROM that comes with this machine. These drivers allow your computer to
communicate with this machine via a printer language.
Note
❒ Some applications may require installation of the PCL 5e printer driver. In
this case, you can install PCL 5e without having to install PCL6.
Reference
See p.17 “Preparing the Machine”.
❖ RPCS printer driver
This printer driver allows the computer to communicate with the printer using a printer language. In addition to the conventional user interface, another
preset user interface is provided.
Reference
See p.17 “Preparing the Machine”.
❖ Adobe PostScript Printer Drivers and PPD files
Adobe PostScript printer drivers and the PPD files are included on the CDROM provided with this machine. Adobe PostScript printer drivers allow the
computer to communicate with the printer using a printer language. PPD
files allow the printer driver to enable specific printer functions.
Reference
See PostScript 3 Supplement.
8
❖ PPD files
PPD files are included on the CD-ROM provided with this machine. PPD files
allow the printer driver to enable specific printer functions.
Reference
See PostScript 3 Supplement.
145
AdonisC4EN-Printer-F1_FM_forPaper.book Page 146 Friday, May 13, 2005 6:00 PM
Appendix
SmartDeviceMonitor for Admin
SmartDeviceMonitor for Admin is an application that uses TCP/IP and IPX/SPX
to monitor network printers. It can monitor multiple network printers using IP address. We recommend that network administrators use this application.
❖ File path
SmartDeviceMonitor for Admin is stored in the following folder in the CDROM.
NETWORK\DEVMON\ADMIN\DISK1
Operating system
Protocol stack
Windows 95 / 98 / Me
TCP/IP provided with Windows 95 / 98 / Me
IPX/SPX provided with Windows 95 / 98 / Me
NetWare Client provided with Windows 95 / 98
Novell Client provided with Windows 95 / 98
Windows 2000
TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client provided with Windows 2000 or Window NT
Windows XP
TCP/IP provided with Windows XP
IPX/SPX provided with Windows XP
NetWare Client provided with Windows XP
Novell Client provided with Windows XP
Windows Server 2003
8
TCP/IP provided with Windows Server 2003
IPX/SPX provided with Windows Server 2003
NetWare Client provided with Windows Server 2003
Novell Client provided with Windows Server 2003
Windows NT 4.0
TCP/IP provided with Windows NT
IPX/SPX provided with Windows NT
Client Service for NetWare provided with Windows NT
Novell Client provided with Windows 2000 or Windows NT
❖ Available functions
SmartDeviceMonitor for Admin has the following functions to check:
• printer supplies such as paper or toner;
• results of print jobs executed from the computer.
Reference
For information about the operations of the system administrator, see Network Guide.
For information about using SmartDeviceMonitor for Admin, see SmartDeviceMonitor for Admin Help.
146
AdonisC4EN-Printer-F1_FM_forPaper.book Page 147 Friday, May 13, 2005 6:00 PM
Software and Utilities Included on the CD-ROM
SmartDeviceMonitor for Client
SmartDeviceMonitor for Client has the following functions. We recommend that
users install this application.
• Printing in a peer-to-peer network, using TCP/IP or IPP from Windows 95 / 98
/ Me / 2000 / XP, Windows Server 2003, and Windows NT 4.0.
• Constantly monitoring the status of devices on the network using TCP/IP
and IPX/SPX.
❖ File path
SmartDeviceMonitor for Client is stored in the following folder on the CDROM.
NETWORK\DEVMON\CLIENT\DISK1
Operating system
Protocol stack
Windows 95 / 98 / Me
TCP/IP provided with Windows 95 / 98 / Me
IPX/SPX provided with Windows 95 / 98 / Me
NetWare Client provided with Windows 95 / 98 / Me
Novell Client provided with Windows 95 / 98 / Me
Windows 2000
TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client provided with Windows 2000 or NT
Windows XP
TCP/IP provided with Windows XP
8
IPX/SPX provided with Windows XP
NetWare Client provided with Windows XP
Novell Client provided with Windows XP
Windows Server 2003
TCP/IP provided with Windows Server 2003
IPX/SPX provided with Windows Server 2003
NetWare Client provided with Windows Server 2003
Novell Client provided with Windows Server 2003
Windows NT 4.0
TCP/IP provided with Windows NT
IPX/SPX provided with Windows NT
Client Service for NetWare provided with Windows NT
Novell Client provided with Windows 2000 or Windows NT
147
AdonisC4EN-Printer-F1_FM_forPaper.book Page 148 Friday, May 13, 2005 6:00 PM
Appendix
❖ Available functions
SmartDeviceMonitor for Client has the following functions.
• Peer-to-peer print function
• Prints directly on the network printer without sending any data to a
print server.
• Prints on a substitute printer when there are too many jobs waiting on
the specified printer, or when an error disables printing (Recovery
Printing).
• Allocates multiple print jobs to multiple printers (Parallel Printing).
• Executes prior group registration of printers specified for Recovery
Printing or Parallel Printing.
• Notification function
• Displays an error message when there is an error on the specified printer
while transferring or printing data.
• Notifies a print completion. You can also be notified of the print condition, such as displaying the notice only when Recovery Printing is executed.
• Monitoring function
• Checks printer supplies such as paper or toner.
• Simultaneously monitors multiple printers in use.
• Checks the printer's network settings and detailed information of printers.
• Enables you to check the print job log using the user ID.
Limitation
❒ For Recovery Printing or Parallel Printing, the options on the printers must
be the same. If a necessary option is not installed, a printer cannot be used
for Recovery Printing or Parallel Printing.
❒ For Recovery Printing or Parallel Printing, the paper loaded in the printers
must be the same. When a tray is selected for printing, load the same paper
in that tray in all printers.
❒ For Recovery Printing or Parallel Printing, the print results may be different if the printers are not the same model or have exactly the same options.
❒ If you select Sample Print, Locked Print, Hold Print, or Stored Print, you
cannot select Recovery Printing or Parallel Printing.
8
Reference
See SmartDeviceMonitor for Client Help.
148
AdonisC4EN-Printer-F1_FM_forPaper.book Page 149 Friday, May 13, 2005 6:00 PM
Troubleshooting
Troubleshooting
Error & Status Messages on the Display Panel
This section describes the principal messages that appear on the panel display.
If a message not described here appears, act according to the message.
Reference
Before turning the main power off, see “Turning On the Power”, General Settings Guide.
❖ Status messages
Message
Status
Hex Dump Mode
In the Hex Dump mode, the machine receives data in hexadecimal format. Turn off the machine after printing, and then turn
back on.
Offline
The machine is offline. To start printing, switch the machine
online by pressing [Online] on the display panel.
Please wait.
The machine is preparing the development unit. Wait a while.
Printing...
The machine is printing. Wait a while.
Ready
This is the default ready message. The machine is ready for
use. No action is required.
Resetting job...
The machine is resetting the print job. Wait until “Ready” appears on the display panel.
Setting change...
The machine is setting changing. Wait a while.
Waiting...
The machine is waiting for the next data to print. Wait a while.
8
❖ Alert messages
Messages/Second messages
Causes
Solutions
The login user name or password entered is incorrect.
Check your login user name
and password.
The machine currently cannot
perform authentication.
Consult an administrator.
Ethernet board has a problem.
An error has occurred in the
Ethernet board.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
HDD has a problem.
An error has occurred in the
hard disk drive.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Authentication has failed.
149
AdonisC4EN-Printer-F1_FM_forPaper.book Page 150 Friday, May 13, 2005 6:00 PM
Appendix
Messages/Second messages
Causes
Solutions
IEEE 802.11b (Wireless LAN)
has a problem.
IEEE 802.11b interface unit
was not inserted when the machine was turned on, or it was
pulled out after the machine
turned on.
Turn off the machine and
check the IEEE 802.11b interface unit is inserted correctly.
Then, turn the machine on
again. If the message appears
again, call your service center.
The settings are not updated
although the unit is detected,
or errors are found while accessing the unit.
Memory Overflow
Maximum capacity of PCL or
PostScript 3 list display has
been exceeded.
Reduce the value of [Resolution] in the printer driver. Alternatively, select [Frame
Priority] from [Memory Usage] in
[System] (See p.128 “System”).
If this message continues to
appear after taking these
steps, decrease the number of
files sent to the machine.
Paper in staple tray. Open
Finisher Cover and remove
paper.
There is paper remaining inside the finisher.
Open the cover of the finisher,
and remove the paper.
Parallel I/F board has a prob- An error has occurred in the
lem.
parallel interface board.
Contact your sales or service
representative.
Printer font error.
An error has occurred in the
font settings.
Check the font settings.
DToner is almost empty.
The toner has almost run out.
Replace the toner cartridge
with a new one.
USB has a problem.
An error has occurred in the
USB interface.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
8
150
AdonisC4EN-Printer-F1_FM_forPaper.book Page 151 Friday, May 13, 2005 6:00 PM
Troubleshooting
The Machine Does Not Print
Possible Cause
Solutions
Is the power on?
Check the cable is securely plugged into the power outlet and the
machine. Turn on the main power switch.
Is the machine online?
If not, press [fOnline] on the display panel.
Does the printer function
status indicator stay red?
If so, check the error message on the display panel and take required action.
Is there a warning status or
error message on the display panel?
If so, check the error message or warning status on the display
panel and take the required action.
Does the “Updating the
destination list...Please
wait. Specified destination(s) or sender's name
has been cleared.” message
appear?
The destination list is being updated from the network using
SmartDeviceMonitor for Admin.
Depending on the number of destinations to be updated, there
may be some delay before you can resume operation. Operations
are not possible while this message is displayed.
Wait until the message disappears. Do not switch off the power
while this message is displayed.
Can you print a configura- If you cannot print a configuration page, there maybe a machine
tion page?
malfunction. Contact your sales or service representative.
See p.126 “Printing the configuration page” for printing a configuration page.
Is the interface cable connected securely to the machine and computer?
Connect the interface cable securely. If it has a fastener, fasten that
securely as well.
Are you using the correct
interface cable?
The type of interface cable you should use depends on the computer. Be sure to use the correct one. If the cable is damaged or worn,
replace it.
See p.10 “Connecting the Machine”.
8
See p.10 “Connecting the Machine”.
Was the interface cable
connected after the machine was turned on?
Connect the interface cable before turning on the machine.
Is the signal status satisfactory when using wireless
LAN in the infrastructure
mode ?
To check signal status, press {User Tools/Counter} key on the display panel, and then press [System Settings] on the display panel.
On the [Interface Settings] tab, select [IEEE 802.11b], and then press
[Wireless LAN Signal]. If signal quality is poor, move the machine to
a location where radio waves can pass or remove objects that
might cause interference.
Note
❒ You can check signal status only when using wireless LAN in
the infrastructure mode.
When using wireless LAN,
is the SSID correctly set?
Check using the machine's display panel that the SSID is correctly set.
151
AdonisC4EN-Printer-F1_FM_forPaper.book Page 152 Friday, May 13, 2005 6:00 PM
Appendix
Possible Cause
Solutions
When using wireless LAN, is Check access point settings when in the infrastructure mode. Dethe access point correctly set? pending on the access point, client access may be limited by MAC
address.
Also, check there are no problems in transmission between access
point and wired clients, and between access point and wireless clients.
When using wireless LAN,
is the LED on the wireless
LAN card lit or blinking?
Confirm the orange LED is lit, and the green LED is lit or blinks
during transmission.
Is the wireless LAN being
used in the ad hoc mode?
Turn the main power off and back on. See “Turning On the Power”,
General Settings Guide.
Otherwise, configure [Network] in [Interface Settings] in [System Settings]. See “Setting Up the Machine on a Network”, Network Guide.
Did you change the option
settings on the machine?
When using the RPCS printer driver on Windows 2000, Windows
XP, Windows Server 2003 and connecting with IEEE 1394, an error
may occur if you change the option settings on the machine. In
this case, follow the procedure below:
A Unplug the IEEE 1394 interface cables connected to the computer.
B Run the utility tool for the IEEE 1394 interface board, which is
stored in the following path on the CD-ROM “Printer Drivers
and Utilities”.
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE
1394, see the README file in the same directory on the CDROM.
C Restart the computer.
8
D Connect the computer to the machine using the IEEE 1394 in-
terface cables.
Is the weekly timer set?
The printer may not be able to print because of the weekly timer
setting. Check the setting. For details, see “User Tools (System Settings)”, General Settings Guide.
Print cannot be performed
from the printer driver.
The login user name, password, or driver encryption key entered
is incorrect.
A high level of encryption was set using the Extended Security
function.
• Check your login user name, password, and driver encryption key.
• For information about the Extended Security settings, consult
an administrator.
152
AdonisC4EN-Printer-F1_FM_forPaper.book Page 153 Friday, May 13, 2005 6:00 PM
Troubleshooting
Problem
Is the Data In indicator
blinking or lit after starting
the print job?
Solutions
If not, data is not being sent to the machine.
❖ When the machine is connected to the computer using
the interface cable
Check the machine port settings are correct. For parallel port
connection, port LPT1 or LPT2 should be set.
• Windows 95 / 98 / Me
A Click the [Start] button, point to [Settings], and then click
[Printers].
B Click the icon of the machine. On the [File] menu, click
[Properties].
C Click the [Details] tab.
D In the [Print to the following port:] list, confirm the correct
port is selected.
• Windows 2000, Windows NT 4.0
A Click the [Start] button, point to [Settings], and then click
[Printers].
B Click the icon of the machine. On the [File] menu, click
[Properties].
C Click the [Ports] tab.
D In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows XP
A Click the [Start] button, and then click [Printers and Faxes].
B Click the icon of the machine. On the [File] menu, click
[Properties].
8
C Click the [Ports] tab.
D In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows Server 2003
A Click the [Start] button, point to [Settings], and then click
[Printers and Faxes].
B Click the icon of the machine. On the [File] menu, click
[Properties].
C Click the [Ports] tab.
D In the [Print to the following port(s)] list, confirm the correct
port is selected.
❖ Network connection
Contact your network administrator.
153
AdonisC4EN-Printer-F1_FM_forPaper.book Page 154 Friday, May 13, 2005 6:00 PM
Appendix
Other Printing Problems
Problem
Causes and Solutions
The print on the en- If the [Toner Saving] check box is selected in the printer driver settings, the
tire page is faded.
entire page will be faded when printed.
For the RPCS printer driver, [Toner saving] is located on the [Print Quality]
tab. For the PostScript 3 printer driver, see PostScript 3 Supplement.
See the printer driver Help.
Print is smudges.
Settings for thick paper have not been made when printing on thick paper
in the bypass tray.
• PCL 6/5e and PostScript 3
Select [Thick] in the [Type:] list on the [Paper] tab.
• RPCS
Select [Thick] in the [Paper type:] list on the [Print Settings] tab.
When printing
graphics, the output and the screen
are different.
If the printer driver is configured to use the graphics command, the graphics command from the machine is used to print.
If you want to print accurately, set the printer driver to print without using
the graphics command.
See the printer driver Help.
Page layout is not
as expected.
Print areas differ depending on machine used. Information that fits on a single page on one machine may not fit on a single page of another machine.
Adjust the [Printable area:] setting in the [Printer Configuration...] dialog box
on the [Print Settings] tab in the RPCS printer driver.
See the printer driver Help.
Duplex printing is
malfunctioning.
8
• Duplex printing cannot be done with paper set in the bypass tray.
When using duplex printing, make settings to use paper from a tray
other than the bypass tray.
• Duplex printing cannot be done with thick paper, OHP transparencies,
or labels specified as the paper type. Specify another paper type.
• Duplex printing cannot be done with a tray for which [1 Sided Copy] has
been specified as Paper Type on the System Settings menu. Change the
Paper Type setting for the tray to [2 Sided Copy] on the System Settings
menu. See General Settings Guide.
154
AdonisC4EN-Printer-F1_FM_forPaper.book Page 155 Friday, May 13, 2005 6:00 PM
Troubleshooting
Problem
Causes and Solutions
When using Windows 95 / 98 / Me
/ 2000 / XP, Windows Server 2003,
or Windows NT
4.0, combined
printing or booklet printing does
not come out as
expected.
Make sure the application's paper size and orientation settings match those
of the printer driver.
If a different paper size and orientation are set, select the same size and orientation.
When using Windows 95 / 98 / Me
/ 2000 / XP, Windows Server 2003,
or Windows NT
4.0, Auto Reduce/Enlarge
print does not
come out as expected.
A print instruction was issued
from the computer, but printing
did not start.
User Authentication may have been set. Consult the appropriate administrators.
The print job is not
canceled even
when the machine
is switched to offline status.
Even when the machine is offline, printing is performed when [Job Acceptance
Priority] has been set in [Parallel Interface] in the [Interface Settings] in the System
Settings menu. Change the setting of Signal Control to Printer priority.
Photo images are
coarse.
Some applications reduce print resolution.
Fine dot pattern
does not print.
Make the following settings with the printer driver:
8
See “User Tools (System Settings)”, General Settings Guide.
• Change the [Dithering:] setting on the [Image Adjustments] tab in the
[Change User Settings...] dialog box on the [Print Quality] tab in the RPCS
printer driver.
Note
❒ To enable [Change User Settings...], select the [User setting] check box.
See the printer driver Help.
Images are cut off, You may be using paper smaller than the size selected in the application.
or excess is printed. Use the same size paper as that selected in the application. If you cannot
load paper of the correct size, use the reduction function to reduce the image, and then print.
See the printer driver Help.
155
AdonisC4EN-Printer-F1_FM_forPaper.book Page 156 Friday, May 13, 2005 6:00 PM
Appendix
Problem
It takes a long
time to complete a
print job.
Causes and Solutions
Photographs and other data intensive pages take a long time for the machine to process, so simply wait when printing such data.
Changing the following settings with the printer driver may help speed up
printing:
❖ PCL 5e
Select the lower value for [Resolution] on the [Print Quality] tab in the
printer properties dialog box.
❖ PostScript 3
Select the lower value in [Resolution]. The location of this setting is given below.
If your operating system is Windows, select [PostScript (optimize for speed)]
in [PostScript Output Option]. [PostScript Output Option] is located as follows:
• Windows 95 / 98 / Me
[Print Quality] tab in the printer properties dialog box.
• Windows 2000 / XP, Windows 2003 Server
[PostScript Output Option] in [PostScript Options] on [Advanced...] on
[Layout] tab in the printing preferences dialog box.
• Windows NT 4.0
[File] on [Advanced...] on [Document Defaults] tab in the printing preferences dialog box.
• Mac OS 9.x
[Printer Specifications] in the print dialog box.
• Mac OS X
[Set 3] tab in [Printer Features] in the print dialog box.
If you use Windows, select [PostScript (optimize for speed)]
• Windows 95 / 98 / Me
[PostScript output format:] on the [PostScript] tab in the printer properties dialog box.
8
• Windows 2000 / XP, Windows Server 2003
[PostScript Output Option] in [PostScript Options] on [Advanced...] on
[Layout] tab in the printing preferences dialog box.
• Windows NT 4.0
[File] on [Document Defaults] on [Advanced...] tab in the printing preferences dialog box.
❖ RPCS
Select the lower value for [Resolution] on the [Print Quality] tab in the
printer driver's dialog box.
Select [Fast] for the [Document type] list on the [Print Quality] tab in the
printer driver's dialog box.
Note
❒ To enable [Change User Settings...], select the [User settings] check box.
See the printer driver Help.
The data is so large or complex that it takes time to process. If the Data In
indicator is blinking, data is being processed. Simply wait until printing
resumes.
156
If “Warming Up...” appears on the display panel, the machine is warming
up. Wait for a while.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 157 Friday, May 13, 2005 6:00 PM
Troubleshooting
Problem
Causes and Solutions
It takes too much
time to resume
printing.
The data is so large or complex that it takes time to process. If the Data In
indicator is blinking, data is being processed. Simply wait until printing
resumes.
The machine was in the Energy Saver mode. To resume from the Energy Saver mode, it has to warm up, and this takes time. See General Settings Guide.
Paper is not fed
from the selected
tray.
When you are using a Windows operating system, printer driver settings
override those set using the display panel. Set the desired input tray using
the printer driver.
See the printer driver Help.
Solid lines are
printed as broken
lines.
Make the following settings with the printer driver:
• Change the [Dithering:] setting on the [Image Adjustments] tab in the
[Change User Settings...] dialog box, on the [Print Quality] tab in the RPCS
printer driver.
See the printer driver Help.
You have to configure the option setup in printer properties when bidirecOptional components connected to tional transmission is not enabled.
the machine are
See the printer driver Help.
not recognized
when using Windows 95 / 98 / Me,
Windows 2000 /
XP, Windows
Server 2003, and
Windows NT 4.0.
Images are printed in the wrong
orientation.
The feed orientation you selected and the feed orientation selected in the
printer driver's option setup might not be the same. Set the machine's feed
orientation and the printer driver's feed orientation accordingly.
8
See the printer driver Help.
The printed image With certain functions, such as enlargement and reduction, image layout
is different from the might be different to that on the computer display.
image on the comYou might have selected to replace True Type fonts with machine fonts in
puter's display.
the printing process.
To print an image similar to that of the computer display, make settings to
print True Type fonts as an image.
See the printer driver Help.
157
AdonisC4EN-Printer-F1_FM_forPaper.book Page 158 Friday, May 13, 2005 6:00 PM
Appendix
Problem
Causes and Solutions
No transmission
Check using the following procedure:
when using 1394 in- A Confirm the IEEE 1394 interface cable is connected securely.
terface connection
B Restart the computer.
If the error occurs even after executing the above operation, proceed to
the following steps.
C Unplug the IEEE 1394 interface cable connected to the computer.
D Run the utility tool for the IEEE 1394 interface board, which is stored in
the following path on the CD-ROM “Printer Drivers and Utilities”:
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE 1394, see
the README file in the same directory on the CD-ROM.
E Restart the computer.
When connecting
the machine using
USB 2.0, the first
page of a print job
that contains a
large volume of
data is printed,
but the remaining
pages are not.
Check that USB Printing Support is installed on your computer.
Reference
See p.38 “Installing the Printer Driver Using USB”.
Note
❒ If the problem cannot be solved, contact your sales or service representative.
8
158
AdonisC4EN-Printer-F1_FM_forPaper.book Page 159 Friday, May 13, 2005 6:00 PM
System Settings (Parallel Connection)
System Settings (Parallel Connection)
❖ Parallel Timing
Specifies the timing for the parallel
interface. Normally, you do not
need to change this setting.
• ACK Inside
• ACK Outside
• STB Down
Note
❒ Default: ACK Outside
❖ Parallel Communication Speed
Specifies the communication
speed of the parallel interface. If
the speed is too high, data may not
be transferred smoothly. If this
happens, change the setting to
“Standard”.
• High Speed
• Standard
Note
❒ Default: High Speed
❖ Selection Signal Status
Specifies the signal level of the parallel interface.
• High
• Low
❖ Bidirectional Communication
Specifies, for instance, how a printer connected to the parallel interface responds to a status request. If
you experience problems using another manufacturer’s printer, set
this to Off.
Limitation
❒ If set to Off, asynchronous communication will not work.
• On
• Off
Note
❒ Default: On
❖ Signal Control
Specifies how to handle any errors
that occur when printing from a
computer. Normally, you do not
need to change this setting.
• Job Acceptance Priority
• Printer Priority
8
Note
❒ Default: Job Acceptance Priority
Note
❒ Default: High
❖ Input Prime
Specifies whether the prime signal
is active or inactive when an input
prime signal is sent. Normally, you
do not need to change this setting.
• Effective
• Invalid
Note
❒ Default: Invalid
159
AdonisC4EN-Printer-F1_FM_forPaper.book Page 160 Friday, May 13, 2005 6:00 PM
Appendix
Precautions when using Windows Server
2003
Precautions When Using the Terminal Server Mode
Certain printer driver functions are disabled. Disabled functions are displayed
in gray. When using all printer driver functions, use Windows Server 2003 in
normal mode.
8
160
AdonisC4EN-Printer-F1_FM_forPaper.book Page 161 Friday, May 13, 2005 6:00 PM
Specifications
Specifications
This section contains the machine's electrical and hardware specifications, including information about its options.
Component
Specifications
Resolution
600 × 600 dpi
300 × 300 dpi
200 × 200 dpi (RPCS only)
Printing speed
Type 1:
• 35 ppm
Type 2:
• 45 ppm
(A4K, 81/2 × 11 K plain paper)
Note
❒ Printing speeds depend on the machine. Check which type of
machine you have. See General Settings Guide.
Interface
Standard:
• Ethernet interface (100BASE-TX / 10BASE-T)
• USB 2.0 interface
Option:
• IEEE 1284 parallel interface
Note
❒ Use a standard 36-pin printer cable not longer than 3 meters
(10 feet).
8
• IEEE 1394 interface
• IEEE 802.11b wireless LAN interface
• Bluetooth interface
Network protocol
Printer language
TCP/IP, IPX/SPX, AppleTalk
Standard: PCL 6/5e, RPCS
Option: PostScript 3, PDF
Fonts
PCL 6/5e :
Agfa Monotype 35 Intellifonts, 10 TrueType fonts, 13 International
fonts, and 1 Bitmap font.
PostScript 3 :
136 fonts (Type 2:24, Type 14:112)
Memory
384 MB
Hard disk
Storage capacity : 40 GB
161
AdonisC4EN-Printer-F1_FM_forPaper.book Page 162 Friday, May 13, 2005 6:00 PM
Appendix
Component
Specifications
Operating systems supported by this machine
Windows 95 / 98 / Me
Windows 2000
Windows XP
Windows Server 2003
Windows NT 4.0
Mac OS 8.6 to 9.2
Mac OS X v10.1 or higher
Network cable
100BASE-TX / 10BASE-T shielded twisted-pair (STP, Category/Type5) cable.
Options
Limitation
❒ Only one optional interface board can be installed in the machine at a time.
Therefore, the optional IEEE 1394 interface board, the IEEE 802.11b interface
unit, the IEEE 1284 interface board, and Bluetooth interface unit cannot be installed concurrently.
IEEE 1394 Interface Board Type B
❖ Transmission spec.:
IEEE 1394
❖ Interface:
IEEE std 1394-1995 compliant
IEEE std 1394a-2000 compliant
8
❖ Device class:
SCSI print (Windows 2000 / XP, Windows Server 2003)
IP over 1394 (Windows Me / XP, Windows Server 2003)
❖ Protocol:
SBP-2 (SCSI print)
TCP/IP (IP over 1394)
❖ Interface connector:
IEEE 1394 (6 pin × 2)
❖ Required cable:
1394 interface cable (6 pin × 4 pin, 6 pin × 6 pin)
Important
❒ You cannot plug devices together to create loops.
❒ Do not use cable that is more than 4.5 meters in length.
162
❖ Data transfer speed:
Maximum 400 Mbps
AdonisC4EN-Printer-F1_FM_forPaper.book Page 163 Friday, May 13, 2005 6:00 PM
Specifications
❖ Connectable number of devices on a bus:
Maximum 63
❖ Allowed cable hops on a bus:
Maximum 16
❖ Power supply:
Non external power supply
Cable Power repeated (IEEE 1394a-2000 compliant)
IEEE 1284 Interface Board Type A
❖ Transmission spec.:
IEEE 1284
❖ Required cableed:
Standard IEEE 1284 compliant Micro Centronics 36 pin cable
IEEE 802.11b Interface Unit Type H
❖ Transmission spec.:
Based on IEEE 802.11b (wireless LAN)
❖ Protocol:
TCP/IP, IPX/SPX, AppleTalk
Note
❒ SmartDeviceMonitor and Web Image Monitor are supported.
8
❖ Data transfer speed:
Auto select from below speed
1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps
❖ Frequency range:
• Metric version:
2412 - 2472 MHz (1 - 13 channels)
• Inch version:
2412 - 2462 MHz (1 - 11 channels)
❖ Transmittable distance:
1 Mbps 400 m *1
2 Mbps 270 m *1
5.5 Mbps 200 m *1
11 Mbps 140 m *1
*1
These figures are a guideline for outdoor use. In general, the transmittable distance indoors is 10 - 100 m, depending on environment.
❖ Transmission mode:
Ad hoc, and infrastructure mode
163
AdonisC4EN-Printer-F1_FM_forPaper.book Page 164 Friday, May 13, 2005 6:00 PM
Appendix
PostScript 3 Unit Type 3045
Reference
See PostScript 3 Supplement.
Bluetooth Interface Unit Type 3245
Reference
See p.50 “Printing with Bluetooth Connection”.
8
164
AdonisC4EN-Printer-F1_FM_forPaper.book Page 165 Friday, May 13, 2005 6:00 PM
INDEX
B
H
Bluetooth Interface Unit Type 3245, 164
Bypass tray, 13
Hard disk, 161
Hold print
deleting, 92
Host Interface, 132
C
Canceling a job
Windows, 102
Chaptering, 111
Clear/Stop key, 5
Collate, 114
Complete List, 82
Configuration page, 126
Connection
Ethernet interface connection, 12
IEEE 1394 interface connection, 11
Parallel interface connection, 11
USB interface connection, 10
Control panel, 5
hold print, 90
locked print, 87
printer features, 123
sample print, 84
stored print, 93
Covers, 106
Custom size paper, 15
printing, bypass tray, 13
D
Data In indicator, 6, 153, 156, 157
Display panel, 5, 6
error messages, 149
Document Server, 135
E
Energy Saver key, 5
Error log, 104
Error messages, 149
F
Finisher, 116
Font Manager 2000, 57
Fonts, 161
Function keys, 6
Function status indicator, 6
I
IEEE 1284 Interface Board Type A, 163
IEEE 1394 Interface Board Type B, 162
IEEE 802.11b Interface Unit Type H, 163
Initial Print Job List, 80
Installing the Printer Driver
Quick Install, 17
Installing the Printer Driver Using USB, 38
Interface, 161
L
List Per User ID, 83, 96
printing all print jobs, 97
printing the desired print job, 96
List / Test Print, 126
Locked print
deleting, 89
M
Main power indicator, 5
Maintenance, 128
Memory, 161
N
Network Cable, 162
Network protocol, 161
Number keys, 6
O
OHP Transparencies
printing, bypass tray, 16
On indicator, 5
Operating system, 162
Operation switch, 5
Options, 162
165
AdonisC4EN-Printer-F1_FM_forPaper.book Page 166 Friday, May 13, 2005 6:00 PM
P
PageMaker, 58
PCL menu, 132
PDF Direct Print, 75
PostScript 3 Unit Type 3045, 164
Precautions when using the Terminal
Server mode
Windows Server 2003, 160
Precautions when using
Windows Server 2003
Windows Server 2003, 160
printer driver, 144
Printer features
adjusting, 125
menu, 123
parameters, 126
Printer Language, 161
Printing a PDF File Directly
PDF Direct Print, 75
Printing Method
PDF Direct Print, 75
Printing speed, 161
Printing with Bluetooth Connection
Windows, 50
Printing with Parallel Connection
Windows 2000, 44
Print Job List, 80
Punch, 120
R
Resolution, 161
S
Sample print
deleting, 86
Slip Sheet, 109
SmartDeviceMonitor for Admin, 146
SmartDeviceMonitor for Client, 147
Specifications, 161
Spool printing, 99
Staple, 117
Stored print
deleting, 95
System, 128
166
T
Thick Paper
printing, bypass tray, 16
Troubleshooting, 149
error messages, 149
machine does not print, 151
other printing problems, 154
status messages, 149
U
Unauthorized copy control, 76
data security for copying, 76
mask type, 78
User Tools/Counter key, 5
W
Windows
canceling a job, 102
Windows 2000
printer properties, PCL, 60
printer properties, RPCS, 68
Windows 95/98/Me
printer properties, PCL, 59
printer properties, RPCS, 66
Windows NT 4.0
document defaults, PCL, 64
document defaults, RPCS, 72
printer properties, PCL, 64
printer properties, RPCS, 72
Windows Server 2003
printer properties, PCL, 62
printer properties, RPCS, 70
Windows XP
printer properties, PCL, 62
printer properties, RPCS, 70
AdonisC4EN-Printer-F1_FM_forPaper.book Page 167 Friday, May 13, 2005 6:00 PM
MEMO
167
AdonisC4EN-Printer-F1_FM_forPaper.book Page 168 Friday, May 13, 2005 6:00 PM
MEMO
168
EN
USA
B783-7512
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=172 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.880000 mm
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Note to users in the United States of America
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio /TV technician for help.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
Caution:
Trademarks
Microsoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Adobe®, PostScript®, Acrobat®, PageMaker® and Adobe Type Manager are registered trademarks of
Adobe Systems Incorporated.
PCL® is a registered trademark of Hewlett-Packard Company.
Apple, AppleTalk, EtherTalk, Macintosh, Mac OS and True Type are registered trademarks of Apple
Computer, Inc.
Rendezvous is a trademark of Apple Computer Inc.
IPS-PRINT™ Printer Language Emulation Copyright© 2000, Oak Technology, Inc., All Rights Reserved.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through
X/Open Company Limited.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks
by Ricoh Company, Ltd. is under license.
NetWare is a registered trademark of Novell, Inc.
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
The proper names of the Windows operating systems are as follows:
• The product name of Windows® 95 is Microsoft® Windows® 95
• The product name of Windows® 98 is Microsoft® Windows® 98
• The product name of Windows® Me is Microsoft® Windows® Millennium Edition (Windows Me)
• The product name of Windows® 2000 are as follows:
Microsoft® Windows® 2000 Professional
Microsoft® Windows® 2000 Server
Microsoft® Windows® 2000 Advanced Server
• The product name of Windows® XP are as follows:
Microsoft® Windows® XP Home Edition
Microsoft® Windows® XP Professional
• The product names of Windows Server™ 2003 are as follows:
Microsoft® Windows Server™ 2003 Standard Edition
Microsoft® Windows Server™ 2003 Enterprise Edition
Microsoft® Windows Server™ 2003 Web Edition
• The product name of Windows NT® 4.0 are as follows:
Microsoft® Windows NT® Workstation 4.0
Microsoft® Windows NT® Server 4.0
Notes
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Depending on which country you are in, your machine may include certain options as standard. For
details, please contact your local dealer.
Declaration of Conformity
Product Name: Printer/Scanner Controller
Model Number: Printer/Scanner Unit Type 3045
Responsible party: Ricoh Corporation
Address: 5 Dedrick Place, West Caldwell, NJ 07006
Telephone number: 973-882-2000
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired operation.
1. Properly shielded and grounded cables and connectors must be used for connections to a host
computer (and/or peripheral) in order to meet FCC emission limits.
2. An AC adapter with a ferrite core must be used for RF interference suppression.
Note to users in Canada
Note:
This Class B digital apparatus complies with Canadian ICES-003.
Remarque concernant les utilisateurs au Canada
Avertissement:
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Copyright © 2005
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=172 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.880000 mm
Printer/Scanner Unit Type 3045 Operating Instructions Printer Reference
Printer/Scanner Unit Type 3045 Operating Instructions Printer Reference
Printed in Japan
EN USA B783-7512
Printer/Scanner Unit Type
3045
Operating Instructions
Printer Reference
1
Getting Started
2
Preparing the Machine
3
Setting Up the Printer Driver
4
Other Print Operations
5
Printer Features
6
Using the Document Server
7
The Functions and Settings of the Machine
8
Appendix
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the
Safety Information in the "General Settings Guide" before using the machine.
B7837512
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement