User manual | Tin/Lead Solder Wire, 0.7mm, 500g This is a resin based 60/40 tin

 Technical data - RS Part number 7568900
Description - Tin/Lead Solder Wire, 0.7mm, 500g
This is a resin based 60/40 tin/lead solder wire. The flux used in this
solder wire has been formulated to wet all common PCB and component
finishes. The clear residues left after soldering can be safely left on the
PCB after soldering.
This solder wire is ideal for a wide range of soldering jobs.
Please note that the presence of lead makes this unsuitable for
soldering all RoHS compliant products.
The alloy used in this solder wire contains 60% tin and 40% lead and
conforms to J-STD 006
Melting point 183 – 188.C
2.2% flux content
Flux classification per J-STD 004 is REL0 leaving a highly reliable post
soldering residue.
Typical soldering iron tip temperature for use with this solder is 320 –
360.C
Store this solder wire in a dry place.
This product contains lead so please wash your hands after use and
read the MSDS before use.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project