DEVI 19805790 Heating cable fitting set Fitting instructions
Below you will find brief information for Heating cable fitting set 19805790. This set allows you to join all types of DEVI self limiting heating cables to heating cables. The set includes different types of crimp tubes, a squeeze connection tube, soldering tube, insulation tape, and adhesive tape. It also provides clear step-by-step instructions for preparing the heating cable and assembling the joint.
Advertisement
Advertisement
Advertisement
Key features
- Joining all types of DEVI self limiting heating cables to heating cables
- Includes different types of crimp tubes
- Provides clear step-by-step instructions
- Uses a hot air gun, blowtorch, or gas lighter for crimping
- Uses squeeze connection tubes for joining conductors
- Uses insulation tape and adhesive tape for securing the joint
- Comes with soldering tube for additional reinforcement
Frequently asked questions
A hot air gun with temperature control is recommended, but a blowtorch or gas lighter can also be used.
Follow the detailed steps outlined in the instructions, including removing the outer sheath, pulling back the screen, and cutting away the insulation.
Wrap 50 mm of adhesive tape around the outside sheath of the cable, starting 30 mm inside the joint and pulling it over the joint.
After pulling the screen from cable number 1 over the joint and securing it, pull the screen from cable number 2 over the joint and screen of cable number 1, then secure it with the TESA insulation tape.