advertisement
WD8704EJ(A/D/E/F/G/H/N/Z)
WD8702EJ(A/D/E/F/G/H/N/Z)
WD8704RJ(A/D/E/F/G/H/N/Z)
WD8702RJ(A/D/E/F/G/H/N/Z)
WD8704JJ(A/D/E/F/G/H/N/Z)
WD8702JJ(A/D/E/F/G/H/N/Z)
WD1704EJ(A/D/E/F/G/H/N/Z)
WD1702EJ(A/D/E/F/G/H/N/Z)
WD1704RJ(A/D/E/F/G/H/N/Z)
WD1702RJ(A/D/E/F/G/H/N/Z)
WD1704JJ(A/D/E/F/G/H/N/Z)
WD1702JJ(A/D/E/F/G/H/N/Z)
Washing Machine user manual
This manual is made with 100% recycled paper.
imagine the possibilities
Thank you for purchasing this Samsung product.
WD8704RJ-02718A-07_EN.indd 1 2014/6/11 17:13:56
features of your new samsung washing machine
Your new washing machine will change the way you feel about doing laundry. From its super-size capacity to its energy efficiency, the Samsung washing machine has all the features to turn a mundane chore into a pleasure.
• Washing to drying with one button
Enjoy convenient non stop washing and drying. 4 different special drying programs can be selected to perform the whole wash cycle including drying using just one button.
• Cupboard (standard program), Low temp drying, Iron, Time Drying (30min ~ 270mins)
These drying programs also can be operated independently of washing programs.
• Child Lock
The Child Lock function ensures that curious little hands are kept out of your washing machine.
This safety feature stops your children from playing with the operation of the washing machine, and alerts you when it is activated.
• Woolmark Certification
The machine has been tested and passed the required Woolmark Company specification for machine washable wool products.
Fabrics should be washed according to the instructions on the garment label as specified by
Woolmark and Samsung.
• Delay End
Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of using your washing machine especially when you have to go out.
• Quick Wash
The Quick Wash program means you can now wash your clothes in just 29 minutes.
• Delicates & Hand Wash Program
The delicates and hand wash programs use a gentle wash action, as well as specific temperatures and water levels to ensure your clothes are cared for.
• Anti Limescale Heater
Our unique anti limescale heater has a double ceramic coating to prevent limescale, making it last up to 3 times longer than a standard heater.
2_ features
WD8704RJ-02718A-07_EN.indd 2 2014/6/11 17:13:56
WD8704RJ-02718A-07_EN.indd 3
• Air Refresh
The Air Refresh system Economically and efficiently expels microbes, mites and odour causing particles, including acid sweat and nicotine, so your clothes smell fresh and new in just 30 minutes.
• Suitable for Air Refresh : Woollen coats, cotton/down jumpers, sweaters, suits, pillows, cushions, soft toys
• Not suitable: leather, silk, velvet, electric blankets, other stained laundry
• Digital Graphic Display
The Digital Graphic Display control panel is clear and easy to use for minimum fuss and hassle. And because it is easy to use, the Digital Graphic Display enables you to make quick and accurate adjustments to your wash for excellent washing results.
• Wide door
The extra wide door opening makes loading and unloading your laundry much easier, especially for larger items like bedding and towels.
• Direct Drive Motor
As the drum does not utilize belts or gears, vibrations are significantly reduced. This increases durability and makes your washing machine much quieter when in operation.
This manual contains important information on the installation, use, and care of your new
Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how to use the washing machine, and tips for making the most of its state-of-the-art features and functions. The “Troubleshooting and information codes” section on page 29 tells you what to do if something goes wrong with your new washing machine.
features
_3
2014/6/11 17:13:56
safety information
Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefits and features.
WHAt you nEED to knoW About sAfEty instRuCtions
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance and retain it at a safe place near the appliance for your future reference. Use this appliance only for its intended purpose as described in this instruction manual.
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your washer.
Because these following operating instructions cover various models, the characteristics of your washer may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service center or find help and information online at www.samsung.com.
iMPoRtAnt sAfEty syMboLs AnD PRECAutions
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury, death and/or property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service centre for help.
Note these warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment using electricity and moving parts, potential hazards exist. To safely operate this appliance, become familiar with its operation and exercise care when using it.
4_ safety information
WD8704RJ-02718A-07_EN.indd 4 2014/6/11 17:13:57
Do not let children (or pets) play on or in your washing machine. The washing machine door does not open easily from the inside, and children may be seriously injured if trapped inside.
WARninG
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children should be supervised to ensure that they do not play with the appliance.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
This appliance should be positioned to be accessible to the power plug, the water supply tabs and the drain pipes.
For washing machines with ventilation openings in the base, ensure that the opening is not obstructed by carpet or any other obstacles.
Use the new hose-sets and old hose-sets should not be reused.
WD8704RJ-02718A-07_EN.indd 5 safety information
_5
2014/6/11 17:13:57
safety information
WARninG
sEVERE WARninG siGns foR instALLAtion
The installation of this appliance must be performed by a qualified technician or service company.
- Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury.
The appliance is heavy, take care upon lifting it
Plug the power cord into an AC 220-240V / 50Hz wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.
- Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the product specifications. Failure to do so may result in electric shock or fire. Plug the power plug into the wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
When the appliance or power plug or power cord is damaged, contact your nearest service centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product
- Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).
Do not install this appliance in a location of low temperature
- Frost may cause tubes to burst
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
Do not use an electric transformer.
- It may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
6_ safety information
WD8704RJ-02718A-07_EN.indd 6 2014/6/11 17:13:57
Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.
- This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failure to do so may result in electric shock or fire.
Do not lay the power cord and tubes where you may fall over them.
CAution
CAution siGns foR instALLAtion
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failure to do so may result in abnormal vibrations, moves, noise, or problems with the product.
WARninG
sEVERE WARninG siGns foR usinG
If the appliance is flooded, turn off the water & power supply immediately and contact your nearest service centre.
- Do not touch the power plug with wet hands
- Failure to do so may cause electric shock
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Do not let children play in or on the washer. In addition, when disposing of the appliance, remove the washer door lever.
- If trapped inside, the child may become trapped and suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it.
WD8704RJ-02718A-07_EN.indd 7 safety information
_7
2014/6/11 17:13:57
safety information
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances.
- This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/ drying/spinning).
- Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
- Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washer.
- This may result in injury.
Do not touch the power plug with wet hands.
- This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in progress.
- Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.
Do not let children or infirm persons use this washer unsupervised. Do not let children climb in the appliance
- Failure to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
- This may result in injury.
Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service centre.
- Failure to do so may result in electric shock, fire, problems with the product, or injury.
If the water supply hose comes loose from the Water tap and floods the appliance, unplug the power plug.
- Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
8_ safety information
WD8704RJ-02718A-07_EN.indd 8 2014/6/11 17:13:57
CAution
CAution siGns foR usinG
When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failure to do so may result in discolouration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
- When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the Water
Tap slowly.
Open the Water Tap slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is flooded because of a draining problem, it may result in electric shock or fire due to electric leakage.
Insert the laundry into the washer completely so that laundry does not get caught in the door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water leakage.
Ensure that the Water Tap is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failure to do so may result in property damage or injury.
Check if the rubber seal is not contaminated by foreign substances (waste, thread, etc).
- If the door is not closed completely, it may result in water leakage.
Open the Water Tap and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water leakage.
To reduce the risk of fire or explosion:
- Under certain conditions, hydrogen gas may be produced in a hot water system such as your hot water heater that has not been used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or more, turn on all hot water taps in your home, and let the water flow for several minutes before using your washing machine. This will release any hydrogen gas build–up. Since hydrogen gas is flammable, do not smoke or light an open flame during this time.
Ventilate immediately without touching the power plug if there is a gas leak.
The product you have purchased is designed for domestic use only.
The use for business purposes qualifies as product misuse.
In this case, the product will not be covered by the standard warranty provided by
Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.
WD8704RJ-02718A-07_EN.indd 9 safety information
_9
2014/6/11 17:13:57
safety information
Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in electric shock, fire, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not place an object that generates a electromagnetic field near the washer.
- This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.
- This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a special program for washing these items.
- Do not wash thick, hard mats even if the washer mark is on the care label.
- This may result in injury or damage to the washer, walls, floor or clothing due to abnormal vibrations.
* Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
- This may result in electric shock or injury due to water leakage.
Do not touch the inside of the tub during or just after drying as it is hot.
- This may result in burns.
Do not insert your hand into the detergent box after opening it.
- This may result in injury as your hand may be caught by the detergent input device. Do not place any objects (such as shoes, food waste, animals) other than laundry into the washer.
- This may result in damage to the washer, or injury and death in the case of pets due to the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
- This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.
- This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long periods of time.
- This may cause the tub to rust.
- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.
- This may result in spontaneous combustion or ignition due to the heat of the oxidation of the oil.
Do not use hot water from water cooling/heating devices.
- This may result in problems with the washer.
10_ safety information
WD8704RJ-02718A-07_EN.indd 10 2014/6/11 17:13:58
Do not use natural hand-washing soap for the washer.
- If it hardens and accumulates inside the washer, it may result in problems with the product, discolouration, rust or bad odors.
Do not wash large laundry items such as bedding in the washing net.
- Place socks and brassieres into the washing net and wash them with the other laundry.
- Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
- If it accumulates inside the washer, it may result in water leakage.
For washing machines with ventilation openings in the base, ensure that the opening is not obstructed by carpet or any other obstacles.
Make sure that the pockets of all clothing to be washed are empty.
- Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.
Do not wash clothing with large buckles, buttons, or other heavy metal.
WARninG
sEVERE WARninG siGns foR CLEAninG
Do not clean the appliance by spraying water directly onto it.
Do not use the strong acid cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discolouration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failure to do so may result in electric shock or fire.
instRuCtion About tHE WEEE MARk
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
WD8704RJ-02718A-07_EN.indd 11 safety information
_11
2014/6/11 17:13:58
contents
sETTING UP yOUR WAshING mAChINE
9
WAshING A lOAD Of lAUNDRy
17
ClEANING AND mAINTAINING yOUR
WAshING mAChINE
26
12_ contents
TROUblEshOOTING AND
INfORmATION CODEs
29
CyClE ChART
31
APPENDIx
32
9 Checking the parts
10 Meeting installation requirements
10
10
Electrical supply and grounding
Water Supply
11 Drain
11 Flooring
11
11
Surrounding temperature
Alcove or closet installation
11 Installing your washing machine
17 Washing for the first time
17 Basic instructions
18 Using the control panel
20
20
Child lock
Sound off
20
20
21
Delay end
Drain Only Function
Air Refresh
22 Using dry course
23 Washing clothes using the cycle selector
23 Washing clothes manually
24 Laundry guidelines
25 Detergent and additives information
25
25
Which detergent to use
Detergent drawer
26 Draining the washing machine in an emergency
26 Cleaning the exterior
27 Cleaning the detergent drawer and drawer recess
27 Cleaning the debris filter
28 Cleaning the water hose mesh filter
28 Repairing a frozen washing machine
28 Storing your washing machine
29 Check these points if your washing machine...
30 Information codes
31 Cycle chart
32 Fabric care chart
32 Protecting the environment
32 Declaration of conformity
33 Specifications
WD8704RJ-02718A-07_EN.indd 12 2014/6/11 17:13:58
setting up your washing machine
Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry.
CHECkinG tHE PARts
Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.
If your washing machine was damaged during shipping, or if you do not have all of the parts, contact
Samsung Customer Service or your Samsung dealer.
Release lever
Detergent drawer
Control panel
Work top
Plug
Door
Drain hose
Debris filter
Adjustable feet tub
Emergency drain tube filter Cover spanner bolt hole covers Water supply hose Hose guide
* bolt hole covers : The number of bolt hole covers depends on the model (3~5 covers).
WD8704RJ-02718A-07_EN.indd 13 setting up your new washing machine
_13
2014/6/11 17:13:59
setting up your washing machine
MEEtinG instALLAtion REQuiREMEnts
Electrical supply and grounding
To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.
WARninG
Never use an extension cord.
Use only the power cord that comes with your washing machine.
When preparing for installation, ensure that your power supply offers:
• 220V~240V 50Hz 15 AMP fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is properly grounded. Do not modify the plug provided with the washing machine. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.
Water supply
Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut off completely. Or, it may take the washing machine longer to fill than what the controls allow, resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/ flooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 4 feet (122cm) of the back of your washing machine for the provided inlet hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long.
WARninG
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fittings.
Before using your washing machine for the first time, check all connections at the water valve and taps for leaks.
14_ setting up your new washing machine
WD8704RJ-02718A-07_EN.indd 14 2014/6/11 17:13:59
Drain
Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.
flooring
For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are contributing factors to vibrations and the tendency for your washing machine to move slightly during the spin cycle.
Never install your washing machine on a platform or poorly supported structure.
surrounding temperature
Do not install your washing machine in areas where water may freeze, since your washing machine always retains some water in its water valve, pump, and hose areas. Frozen water in the lines can cause damage to belts, the pump, and other components.
Alcove or closet installation
To operate safely and properly, your new washing machine requires minimum clearances of:
Sides – 25 mm
Top – 25 mm
Rear – 51 mm
Front – 465 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet must have at least 465 mm unobstructed air opening. Your washing machine alone does not require a specific air opening.
instALLinG youR WAsHinG MACHinE sTEP 1 selecting a location
Before you install the washing machine, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation
• Is away from direct sunlight
• Has adequate ventilation
• Will not be freezing (below 32 ˚F or 0 ˚C)
• Is away from heat sources such as oil or gas
• Has enough space so that the washing machine doesn’t stand on its power cord
WD8704RJ-02718A-07_EN.indd 15 setting up your new washing machine
_15
2014/6/11 17:13:59
setting up your washing machine
sTEP 2
Removing the shipping bolts
Before installing the washing machine, you must remove all shipping bolts from the back of the unit.
1. Loosen all the bolts with the supplied wrench.
2. Hold the bolt with the spanner and pull it through the wide section of the hole. Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Store the shipping bolts away safely in case you have to move the washing machine in the future.
WARninG
Packaging materials can be dangerous to children; keep all packaging material (plastic bags, polystyrene, etc.) well out of the reach of children.
16_ setting up your new washing machine
WD8704RJ-02718A-07_EN.indd 16 2014/6/11 17:13:59
sTEP 3
Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible.
1. Slide the washing machine into position.
2. Level your washing machine by turning the leveling feet in and out as necessary by hand.
3. When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine.
WD8704RJ-02718A-07_EN.indd 17
sTEP 4
Connecting the water and drain
Connecting the water supply hose
1. Take the L-shaped arm fitting for the cold water supply hose and connect it to the cold water supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected to the washing machine at one end and to the water tap at the other. Do not stretch the water supply hose. If the hose is too short, replace the hose with a longer, high pressure hose.
2. Connect the other end of the cold water supply hose to your sink’s cold water tap and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting.
for selected models with an additional hot water intake:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten it by hand.
3. Use a Y-piece if you only want to use cold water.
setting up your new washing machine
_17
2014/6/11 17:14:00
setting up your washing machine
Connecting the water supply hose (selected models)
1. Remove the adaptor from the water supply hose.
Adaptor
Water supply hose
5 mm
2. First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap.
1
2
3. Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
1
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.
After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.
3
Water tap
2
5. Connect the other end of the water supply hose to the inlet water valve at the rear of the washing machine. Screw the hose clockwise all the way in.
18_ setting up your new washing machine
WD8704RJ-02718A-07_EN.indd 18 2014/6/11 17:14:01
6. Turn on the water supply and ensure that no water leaks from the water valve, tap or adaptor. If there is a water leaks, repeat the previous steps.
WARninG
Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.
✗
• If the water tap has a screw type tap, connect the water supply hose to the tap as shown.
✗
Use the most conventional type of tap for the water supply. In case the tap is square or too big, remove the spacing ring before inserting the tap into the adaptor.
WD8704RJ-02718A-07_EN.indd 19 setting up your new washing machine
_19
2014/6/11 17:14:01
setting up your washing machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
Drain hose
Hose guide
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.
3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than
60 cm and no longer than 90 cm.
the standpipe drain requires;
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
sTEP 5
Powering your washing machine
Plug the power cord into a wall sockets, a 230 volt 50 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. (For more information on electrical and grounding requirements, see page 10.) test run
Make sure that you install your washing machine correctly by running the Rinse+spin cycle after the installation is complete.
20_ setting up your new washing machine
WD8704RJ-02718A-07_EN.indd 20 2014/6/11 17:14:02
washing a load of laundry
With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash first.
WAsHinG foR tHE fiRst tiME
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
1. Press the Power button.
2. Add a little detergent to the detergent compartment in the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the start/Pause button.
This will remove any water that might be left over in the machine from the manufacturer’s test run.
Compartment : Detergent for prewash, or starch.
Compartment : Detergent for the main wash, water softener, pre-soaking agent, bleach and stain removal product.
Compartment : Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX) of “A”)
bAsiC instRuCtions
1. Load your laundry into the washing machine.
WARninG
Do not overload the washing machine. To determine the load capacity for each type of laundry, refer to the chart on page 24.
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.
• Do not wash water-proofed items.
2. Close the door until it latches.
3. Turn the power on.
4. Add detergent and additives to the dispenser drawer.
5. Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the start/Pause button.
washing a load of laundry
_21
2014/6/11 17:14:03 WD8704RJ-02718A-07_EN.indd 21
washing a load of laundry
usinG tHE ContRoL PAnEL
1 2
1
DIGITAl GRAPhIC
DIsPlAy
2
CyClE sElECTOR
22_ washing a load of laundry
3 4 1 5 6 7 8 9 10 11 12
Displays the remaining wash cycle time, all cycle information, and error messages.
Select the tumble pattern and spin speed for the cycle.
For detailed information, refer to “Washing clothes using the cycle selector”. (see page 23)
Cotton - For averagely or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.
synthetics - For averagely or lightly soiled blouses, shirts, etc., made of polyester (diolen, trevira), polyamide (perlon, nylon) or other similar blends.
Denim - A higher water level in the main wash and extra rinse ensure that no washing powder remains that may mark your clothing.
sports Wear - Use for water-proofed or proofed garments to keep their good looks and fresh feel.
Delicates - For sheer fabrics, brassieres, lingerie, dresses, shirts and blouses. For best results, use liquid detergent.
Wool - Only for machine-washable wool. A load should be less than 2.0 kg.
• The wool course washes the laundry using gentle cradling actions.
During the wash, the gentle cradling and soaking actions are continued to protect the wool fibers from shrinkage / distortion and for a super gentle clean. This stop operation is not a problem.
• Neutral detergent is recommended for wool course, for improved washing results and for improved care of the wool fibers.
The wool wash cycle of this machine has been approved by
Woolmark for the washing of machine-washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M1125 (Certificate
Number issued by IWS NOM INEE Co., Ltd.)
Handwash - A very light wash cycle as gentle as a hand wash.
Air Refresh - This course is useful for removing bad odors. Turning the
Cycle Selector cycles through the following operating modes.
(Air Refresh Air Refresh Hygiene)
• Air Refresh - Reduces bad smells from the laundry
• Air Refresh Hygiene - Deodorize and sterilize the laundry by stronger Air Refresh action with higher temp.
Drying - Select to dry laundry automatically by detecting the amount and weight of the laundry.
Daily Wash - Use for everyday items such as underwear and shirts.
WD8704RJ-02718A-07_EN.indd 22 2014/6/11 17:14:03
3
4
5
6
7
8
9
PREWAsh sElECTION bUTTON
DElAy END sElECTION bUTTON
TEmPERATURE sElECTION bUTTON
RINsE sElECTION bUTTON sPIN sElECTION bUTTON
DRyING bUTTON
INTENsIVE WAsh sElECTION bUTTON
10 sOUND Off bUTTON
11
12 sTART/PAUsE sElECTION bUTTON
POWER bUTTON
Quick 29’ - For lightly soiled garments that you require quickly. spin - Performs an additional spin cycle to remove more water.
Rinse + spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.
Drain only - Turn the Cycle selector to the Spin position, press the
spin button, and then press the start/Pause button to drain the water.
Press this button to select pre-wash. Pre-wash is only available with:
Cotton, Synthetics, Denim, Sports Wear, Daily Wash.
Press this button repeatedly to cycle through the available Delay End options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be finished.
Press this button repeatedly to cycle through the available water temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
Press this button to add additional rinse cycles. The maximum number of rinse cycles is five.
Press the button repeatedly to cycle through the available speeds for the spin cycle.
WD8704/WD1704
WD8702/WD1702
, , 400, 800, 1200, 1400 rpm
, , 400, 800, 1000, 1200 rpm
“No spin ” - The laundry remains in the drum and no spin cycle is performed after the final drain.
“Rinse Hold ” -The laundry remains soaking in the final rinse water. Before the laundry can be unloaded, either a Drain or Spin cycle must be performed.
Pressing the button cycles through the following options.
Cup Board Low Temp Iron Time Dry (30min.
1:00min. 1:30min. 2:00min. 2:30min. 3:00min. 3:30min.
4:00min. 4:30min.) Cup Board
“Cup Board ” - Use this cycle to dry loads such as cotton, underwear, and linen.
“Low Temp ” - This cycle protect heat-sensitive items at a low drying temperature.
“Iron ” - Finishes the dry cycle in a moist state appropriate for Ironing.
“Time Dry ” -Dry the laundry for the specified period of time.
• You must avoid washing laundry that may not be dried as it may be deformed even at low temperatures.
• The Cup Board, Low Temp, Iron and Time Dry options detect the weight of the laundry in order to display an accurate drying time and dry them more completely.
• The drying conditions may differ depending on the type and the amount of laundry.
Press this button when the laundry is heavily soiled and needs to be washed intensively. The cycle time is increased for each cycle.
The sound can be turned off for all courses. When this function is selected, the sound is turned off for all cycles.
• When the Sound off function is activated, the lamp on the sound Off button and the control panel are illuminated.
• When the Sound off function is deactivated, a buzzer will go off, and the lamp on the button and the control panel is turned off.
Press to pause and restart a cycle.
Press it once to turn your washing machine on, press it again to turn your washing machine off. If the washing machine is left on for more than 10 minutes without any buttons being touched, the power automatically turns off.
washing a load of laundry
_23
WD8704RJ-02718A-07_EN.indd 23 2014/6/11 17:14:04
washing a load of laundry
Child lock
The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed.
Activating/Deactivating
If you want to activate or deactivate the Child Lock function, press the Temp. and Rinse buttons at the same time for
3 seconds. “Child Lock ” will be lit when this feature is activated.
When the Child Lock function is activated, only the
Power button works. The Child Lock function remains on even after the power is turned on and off or after the disconnecting and reconnecting the power cord.
3 sEC.
sound off
The Sound Off function can be selected during all courses. When this function is selected, sound is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function, press the sound Off button. The
“Sound Off ” and the lamp on the sound Off button will be lit when this feature is activated.
Delay end
You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the wash will be finished.
1. Manually or automatically set your washing machine according to the type of laundry you are washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the start/Pause button. The “Delay End ” indicator will be lit, and the clock will begin counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine on again.
Drain only function
When you want to drain water from the washing machine, follow the instructions below.
1. Press the Power button.
2. Turn the Cycle Selector to the Spin positio.
3. Press the spin button 1 times until rpm sign is off.
4. Then “1” shows up on time display in center.
5. Press the start/Pause button.
24_ washing a load of laundry
WD8704RJ-02718A-07_EN.indd 24 2014/6/11 17:14:05
WD8704RJ-02718A-07_EN.indd 25
Air Refresh
Air Refresh can refresh laundry without using water thanks to its powerful airing system. Clothing that can be refreshed includes woollen coats, cotton or jumpers, sweaters and suits. (Never Air
Refresh more than two items or over 1kg at once).
1. Open the door, place the laundry into the washing machine and close the door.
2. Press the Power button.
3. Select Air Refresh by turning the Cycle selector.
• Each time the button is pressed, the operating mode cycles through the following sequence: Air Refresh, Air Refresh Hygiene ...
mODE CyClE TImE
Air Refresh
Air Refresh Hygiene
29 min
59 min
• When one of these options has been selected, no other button can be selected and you can only select the delay end time from between 3:00 – 19:00.
4. Close the door and press the start/Pause button.
• When there is water in the tub, Air Refresh cannot be selected. Drain the water and select Air Refresh.
• Press the start/Pause or Power button to remove the laundry.
• Fragrance or dryer sheets can be used with Air Refresh programs to add fragrance to your refreshed laundry (one sheet per one or two items).
Avoid Air Refresh the following clothes:
• Sensitive clothes made of leather, mink, fur, silk, etc.
• Underwear trimmed with lace, ‘glued’ doll cushions, and dress suits may have their decorations loosened.
• Clothes trimmed with buttons can cause them to break.
• Starchy clothes can become deformed.
• Hard bedding such as a wooden pillows (neck-rest)
- Pillows or blankets filled with plastic or starch rather than cotton
- Electric blankets
• Furry blankets
• Bulky blankets
• Latex pillow washing a load of laundry
_25
2014/6/11 17:14:05
washing a load of laundry
usinG DRy CouRsE
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line for the dried clothe of 5.0kg.
1. Open the door, put in the clothes and close the door again.
2. Press the Power button and then press the Drying button.
: The standard course will be selected automatically.
Drying is limited in some courses.
3. Select Drying button as follows.
Drying Programs
• Every press of this button will select drying type repeatedly in the following order:
Cup Board Low Temp Iron Time Dry (30min. 1:00min.
1:30min. 2:00min. 2:30min. 3:00min. 3:30min. 4:00min. 4:30min.)
Cup Board
Drying Type Information max load
Time
(max load)
3.5kg
169min.
Cupboard ( ) Standard: Dries the laundry.
Auto Drying Low Temp. ( )
Time Drying (
Iron (
)
)
Dries the laundry at a low temperature to protect the texture of the laundry.
For leaving items partially damp so that it can be easily ironed.
You can select the appropriate drying time depending on the texture, quantity, and moisture.
2.0kg
2.0kg
5.0kg
160min.
30min.
270min.
• It automatically displays Drying Time by sensing the weight of clothes before drying for increasing the drying effect.
• For laundry weighing less than 3.5kg, use the Auto Dry. For laundry that weighs more, please use the Time Dry.
• If both the spin and drying cycles are selected, the spin speed is automatically selected to enhance the drying efficiency.
• When using the drying cycle, check if the water supply valve is opened.
4. Put suitable amount of detergent and fiber softener in the detergent tray and close it again.
5. Press start/Pause button.
: It automatically performs an optimal function from washing to drying.
• The selected course can’t be altered after the start of drying.
• If you select Drying function, the intensity of SPIN will be set up as High in default for increasing the drying effect.
• If cold water is not supplied, drying will not be performed.
• In case you wish to dry after hand washing, select both Spin and Dry at the same time.
26_ washing a load of laundry
WD8704RJ-02718A-07_EN.indd 26 2014/6/11 17:14:05
WD8704RJ-02718A-07_EN.indd 27
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Sports Wear, and
Daily Wash cycles. It is only necessary if your clothing is heavily soiled.
7. Use the Cycle selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Sports Wear, Delicates, Wool, Hand Wash, Daily Wash, Quick
29’. The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning speed, and the delay time by pressing the appropriate option button.
9. Press the start/Pause button and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
Pause option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate compartments.
7. Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
9. Press the spin button to select the spin speed.
The rinse hold function allows you to remove items that are still wet from the washing machine. ( : No Spin, : Rinse Hold)
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at which the wash will be finished.
11. Press the start/Pause button and the machine will begin the cycle.
washing a load of laundry
_27
2014/6/11 17:14:05
washing a load of laundry
LAunDRy GuiDELinEs
Follow these simple guidelines for the cleanest laundry and the most efficient wash.
Always check the Care label on clothing before washing.
sort and wash your laundry according to the following criteria:
• Care Label: Sort laundry into cottons, mixed fibres, synthetics, silks, wools and rayons.
• Colour: Divide whites and colours. Wash new colour items separately.
• Size: Placing items of different sizes in the same load will improve the wash action.
• Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new woollen items, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the appendix.
Emptying pockets
Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects, such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash clothing with large buckles, buttons, or other heavy metal objects. Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and embroidered clothes inside out before washing them. If zips of pants and jackets are open while washing, the spin basket may be damaged. Zips should be closed and fixed with a string before washing. Clothing with long strings may become entangled with other clothes damaging them. Be sure to fix the strings before starting the wash.
Prewashing cotton
Your new washing machine, combined with modern detergents, will give perfect washing results, thus saving energy, time, water and detergent. However, if your cotton is particularly dirty, prewash with a protein-based detergent.
Determining the load capacity
Do not overload the washing machine or your laundry may not wash properly. Use the chart below to determine the load capacity for the type of laundry you are washing.
fabric Type
Model
Cotton
- average/lightly soiled
- heavily soiled synthetics
Denim sports Wear
Delicates
Wool load Capacity
WD8704 / WD8702 / WD1704 / WD1702
7.0 kg
3.0 kg
3.0 kg
2.5 kg
2.5 kg
2.0 kg
• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.
If the laundry is unbalanced, the spin efficiency may be degraded.
• When washing Bedding or Duvets, the wash time may be lengthened or the spin efficiency may be degraded.
make sure to insert brassieres (water washable) into a laundry net (to be purchased additionally).
• The metal parts of the brassieres may break through the material and damage the laundry. Therefore make sure to place them inside a fine laundry net.
• Small, light clothing such as socks, gloves, stockings and handkerchiefs may become caught around the door. Place them inside a fine laundry net.
Do not wash the laundry net by itself without other laundry. This may cause abnormal
CAution vibrations that could move the washing machine and cause an accident resulting in injury.
28_ washing a load of laundry
WD8704RJ-02718A-07_EN.indd 28 2014/6/11 17:14:05
DEtERGEnt AnD ADDitiVEs infoRMAtion
Which detergent to use
The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry detergent, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the degree of soiling, and the hardness of the water in your area. If you do not know how hard your water is, enquire at your local water authority.
Do not use detergent that has hardended or solidified as the detergent may remain in the rinse cycle. It may cause your washing machine to not rinse properly or result in the overflow becoming blocked.
Please note the following when using the Wool course.
• Use a neutral liquid detergent for wool only.
• When using a powder detergent, it may remain on the laundry and cause damage to the material (wool).
Detergent drawer
Your washing machine has separate compartments for dispensing detergent and fabric softener.
Add all laundry additives to the correct compartment before starting your washing machine.
Do NOT open the detergent drawer when your washing machine is running.
1. Pull out the detergent drawer on the left side of the control panel.
2. Add the recommended amount of laundry detergent directly into the detergent compartment before starting your washing machine.
3. Add the recommended amount of fabric softener into the softener compartment if required.
CAution
Do NOT add any powder/liquid detergent to the softener compartment ( ).
WD8704RJ-02718A-07_EN.indd 29
4. When using the Prewash option, add the recommended amount of laundry detergent into the prewash compartment .
When washing large items do NOT use the following detergetnt types.
• Tablet and capsule type detergents
• Detergents using a ball and net
Concentrated or thick fabric softener and conditioner must be diluted with a little water before being poured into the dispenser (prevents the overflow from becoming blocked.)
MAX
Be careful that the fabric softener does not overflow, when you close the detergent drawer after adding fabric softener into the rinse detergent compartment.
washing a load of laundry
_29
2014/6/11 17:14:06
cleaning and maintaining your washing machine
Keeping your washing machine clean improves its performance, wards off unnecessary repairs, and lengthens its life.
DRAininG tHE WAsHinG MACHinE in An EMERGEnCy
1. Unplug the washing machine from the power supply.
2. Open the filter cover using a coin or a key.
filter cover
3. Unscrew the emergency drain cap by turning it to the left.
4. Hold the cap on the end of the emergency drain tube and slowly pull it out about 15 cm.
5. Allow all the water to flow into a bowl.
6. Reinsert the drain tube and screw the cap back on.
7. Replace the filter-cover.
Emergency drain tube
Emergency drain cap
CLEAninG tHE EXtERioR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth using a nonabrasive household detergent.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water onto the washing machine.
30_ cleaning and maintaining your washing machine
WD8704RJ-02718A-07_EN.indd 30 2014/6/11 17:14:06
CLEAninG tHE DEtERGEnt DRAWER AnD DRAWER RECEss
1. Press the release lever on the inside of the detergent drawer and pull the drawer out.
2. Remove the liquid detergent divider from the detergent drawer
Release lever
Liquid detergent divider
3. Wash all parts under running water.
4. Clean the drawer recess with an old toothbrush.
5. Replace the liquid detergent divider by pushing it firmly into the drawer.
6. Push the drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle without any laundry in the drum.
CLEAninG tHE DEbRis fiLtER
We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is displayed. (Refer to “Draining the washing machine in an emergency” in the previous page.)
1. Open the filter cover by using a key or coin.
2. Unscrew the emergency drain cap by turning it to the left and drain off all the water.
3. Unscrew the debris filter cap.
Debris filter cap
4. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.
5. Replace the debris filter cap.
6. Replace the filter cover.
WD8704RJ-02718A-07_EN.indd 31 cleaning and maintaining your washing machine
_31
2014/6/11 17:14:07
cleaning and maintaining your washing machine
CLEAninG tHE WAtER HosE MEsH fiLtER
You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is displayed:
1. Turn off the water supply to the washing machine.
2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out due to the air pressure in the hose, cover the hose with a cloth.
3. Gently pull out the mesh filter from the end of the hose using a pair of pliers and rinse it under water until clean. Also clean inside and outside the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Make sure the connections are watertight and turn on the tap.
REPAiRinG A fRozEn WAsHinG MACHinE
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water over the tap to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water tap and check if the water supply and drain are operating normal.
stoRinG youR WAsHinG MACHinE
If you need to store your washing machine for an extended time, it’s better to drain and disconnect it.
Washing machines can be damaged if water is left in the hoses and internal components before storage.
1. Select the Quick 29’ cycle and add bleach to the bleach compartment. Run your washing machine through the cycle without a load.
2. Turn the water taps off and disconnect the inlet hoses.
3. Unplug your washing machine from the electrical outlet, and leave your washing machine door open to allow air to circulate inside the tumbler.
If your washing machine has been stored in below-freezing temperatures, allow time for any leftover water in your washing machine to thaw out before using it.
32_ cleaning and maintaining your washing machine
WD8704RJ-02718A-07_EN.indd 32 2014/6/11 17:14:08
troubleshooting and information codes
CHECk tHEsE Points if youR WAsHinG MACHinE...
PROblEm
Will not start
Has no water or not enough water
Has detergent remains in the detergent drawer after the wash cycle is complete
Vibrates or is too noisy the washing machine does not drain and/or spin
Door is locked shut or will not open.
sOlUTION
• Make sure your washing machine is plugged in.
• Make sure the door is firmly closed.
• Make sure the water source tap(s) are turned on.
• Make sure to press the Start/Pause button.
• Turn the water tap on fully.
• Make sure the water source hose is not frozen.
• Straighten the water intake hoses.
• Clean the filter on the water intake hose.
• Make sure your washing machine is running with sufficient water pressure.
• Make sure the detergent is added to the center of the detergent drawer.
• Make sure your washing machine is on a level surface. If the surface is not level, adjust the washing machine feet to level the appliance.
• Make sure that the shipping bolts are removed.
• Make sure your washing machine is not touching any other object.
• Make sure the laundry load is balanced.
• Straighten the drain hose. Eliminate kinked hoses.
• Make sure the debris filter is not clogged.
• The door will not open until 3 minutes after the machine stops or the power turns off.
If the problem persists, contact your local Samsung Customer Service.
WD8704RJ-02718A-07_EN.indd 33 troubleshooting and information codes
_33
2014/6/11 17:14:08
troubleshooting and information codes
infoRMAtion CoDEs
When your washing machine malfunctions, you may see an information code on the display. If that happens, check this table and try the suggested solution before calling Customer Service.
CODE symbOl dE
4E
5E
UE cE/3E hot sd/sud
Uc sOlUTION
• Make sure the door is firmly closed.
• Make sure that laundry is not caught in the door.
• Make sure the source water tap is turned on.
• Check the water pressure.
• Clean the debris filter.
• Make sure the drainage hose is installed correctly.
• The laundry load is unbalanced. Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory and an “UE” error message will be shown in the display window.
• Call the after-sales service.
• It appears when the internal temperature of the drum is high.
The fan will automatically function, so just wait until “Hot” indication disappeared.
• This occurs when too much foaming is detected. It is also displayed while foaming is removed. When the removal is finished, the normal cycle proceeds.(This is one of the normal operations. It is an error for preventing non-sensing faults.)
• If the voltage of the supplied power is instable, the washing machine will be paused to protect its electric devices.
• If the correct voltage is supplied, the cycle will resume automatically.
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
34_ troubleshooting and information codes
WD8704RJ-02718A-07_EN.indd 34 2014/6/11 17:14:08
cycle chart
CyCLE CHARt
(
user option)
PROGRAm
Cotton synthetics
Denim sports Wear
Delicates
Wool
Handwash
Air Refresh
Air Refresh Hygiene
Drying
Daily Wash
Quick 29’ max load(kg)
WD8704/
WD8702/
WD1704/
WD1702
7.0
3.0
3.0
2.5
2.5
2.0
2.0
1.0
1.0
5.0
3.0
3.0
Pre-wash
-
-
-
-
-
-
-
DETERGENT wash yes yes yes yes yes yes yes
-
-
yes yes softener
-
-
-
-
-
max Temp
(˚C)
95
60
60
60
40
40
40
(NOT DISPLAYED)
(NOT DISPLAYED)
(NOT DISPLAYED)
60
60
PROGRAm
Cotton synthetics
Denim
1400 spin speed(mAx) rpm
WD8704
WD1704
WD8702
WD1702
1200
1200
800
1200
800
Delay end
Cycle time
(min)
120
90
78 sports Wear
Delicates
Wool
Handwash
Air Refresh
Air Refresh Hygiene
Drying
Daily Wash
Quick 29’
-
-
-
1200
1400
1200
800
800
400
1200
800
800
400
-
-
-
1200
1200
29
59
169
70
29
72
50
38
31
1. A cycle with a prewash takes approx. 15 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC 60456 / EN
60456.
3. EU energy label washing performance tests according to EN 50229 should be carried out using a 7 kg load and the following program: Cotton 60˚C + intensive.
4. For EU energy label drying performance tests according to EN 50229, the 7 kg washing base load should be divided into two equal parts of approximately 3.5kg and each part should be dried separately using the Cupboard Dry program.
5. Course time in individual homes may differ from the values given in the table due to variations in the pressure and temperature of the water supply, the load and the type of laundry.
6. When the Intensive Wash function is selected, the cycle time is increased for each cycle.
cycle chart
_35
WD8704RJ-02718A-07_EN.indd 35 2014/6/11 17:14:08
appendix
fAbRiC CARE CHARt
The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing, and dry cleaning when necessary.
The use of symbols ensures consistency among garment manufacturers of domestic and imported items.
Follow the care label directions to maximize garment life and reduce laundering problems.
Resistant material
Delicate fabric
Item may be washed at 95 ˚C
Item may be washed at 60 ˚C
Item may be washed at 40 ˚C
Item may be washed at 30 ˚C
Item may be hand washed
Dry clean only
Can be bleached in cold water
Do not bleach
Can be ironed at 200 ˚C max
Can be ironed at 150 ˚C max
Can be ironed at 100 ˚C max
Do not iron
Can be dry cleaned using any solvent
Dry clean with perchloride, lighter fuel, pure alcohol or R113 only
Dry clean with aviation fuel, pure alcohol or R113 only
Do not dry clean
Dry flat
Can be hung to dry
Dry on clothes hanger
Tumble dry, normal heat
Tumble dry, reduced heat
Do not tumble dry
PRotECtinG tHE EnViRonMEnt
• This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manu-facturers’ instructions.
• Use stain removal products and bleaches before the wash cycle only when strictly necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon the program used).
DECLARAtion of ConfoRMity
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
36_ appendix
WD8704RJ-02718A-07_EN.indd 36 2014/6/11 17:14:11
sPECifiCAtions
DiMEnsions
WAtER PREssuRE
WAtER VoLuME nEt WEiGHt
TyPE fRONT lOADING WAshING mAChINE
WD8704 / WD8702
WD1704 / WD1702
W598mm X D600mm X H844mm
50 kPa ~ 800 kPa
56 ℓ
WD8704
WD1704
67 kg
7.0 kg [DRY LAUNDRY]
WD8702
WD1702
67 kg
WAsH AnD sPin CAPACity
DRy CAPACity
MODEL
5.0 kg
WD8704 / WD8702
WD1704 / WD1702
PoWER ConsuMPtion
WASHING
WASH AND
HEATING
DRYING
220 V
240 V
220 V
240 V
230V
WD8704
WD1704
350 W
150 W
150 W
2000 W
2400 W
1600W
WD8702
WD1702
250 W
MODEL
SPIN
230V
PUMPING
PACkAGE WEiGHt
MODEL
PAPER
34 W
WD8704 / WD8702
WD1704 / WD1702
1 kg
PLASTIC 1 kg sPin REVoLutions
MODEL
WD8704
WD1704
WD8702
WD1702 rpm 1400 1200
The appearance and specifications of the product are subject to change without prior notice for purposes of product enhancement.
WD8704RJ-02718A-07_EN.indd 37 appendix
_37
2014/6/11 17:14:11
appendix
sHEEt of HousEHoLD CoMbinED WAsHER-DRiERs
According to Regulation (EU) No. 90/60/EC samsung
Model name WD1704RJ*
Energy Efficiency Class
A (most efficient) to G (least efficient) B
Energy Consumption
Washing, spinning, and drying kWh 5.12
Washing and spinning only
Washing Performance Class
A (most efficient) to G (least efficient) kWh 1.19
A
Water Extraction Efficiency Class
A (most efficient) to G (least efficient)
Residual moisture
Maximum spin speed
Capacity
Washing
Drying
% rpm kg kg
Water Consumption
Washing, spinning, and drying
Washing and spinning only ℓ ℓ
Program time for complete operating cycle (60 ºC cotton washing and
‘dry cotton’ drying for rated washing capacity
Washing, spinning, and drying min
Washing and spinning only min
Programs to which the information on the label and the sheet relate
Washing
Drying
Estimatd annual consumption for a 4-person household, always using the dries (200 cycles)
Energy Consumption
Water Consumption kWh/yr ℓ
Estimatd annual consumption for a 4-person household, never using the drier (200 cycles)
Energy Consumption
Water Consumption kWh/yr ℓ
A
44
1400
7
5
148
56
524
224
Cotton 60 ºC + Intensive
Drying + Cup board
1024
29600
238
11200
WD8704RJ-02718A-07_EN.indd 38 2014/6/11 17:14:11
memo
WD8704RJ-02718A-07_EN.indd 39 2014/6/11 17:14:11
QUESTIONS OR COMMENTS?
Country
U.K
CAll
0330 SAMSUNG (7267864)
WD8704RJ-02718A-07_EN.indd 40
OR VIsIT Us ONlINE AT www.samsung.com/uk/support
Code No. DC68-02718A-07_EN
2014/6/11 17:14:11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project