Samsung 460DRN User manual

Add to my manuals
94 Pages

advertisement

Samsung 460DRN User manual | Manualzz

SyncMaster 460DRn / 460DR

LCD Display

User Manual

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

Safety Instructions

Notational

Note

These safety instructions must be followed to ensure your safety and prevent property damage.

Make sure to read the instructions carefully and use the product in the correct manner.

Warning / Caution

Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.

Notational Conventions

Prohibited

Do not disassemble

Do not touch

Important to read and understand at all times

Disconnect the plug from the outlet

Ground to prevent an electric shock

Power

When not used for extended period of time, set your computer to DPM.

If using screen saver, set it to active screen mode.

The images here are for reference only, and are not applicable in all cases

(or countries).

Shortcut to Anti-Afterimage Instructions

Do not use a damaged power cord or plug or a damaged or loose power outlet.

• Otherwise, this may result in electric shock or fire.

Do not touch the power plug with wet hands when removing or plugging the plug into the outlet.

• Otherwise, this may result in electric shock.

Make sure to connect the power cord to a grounded power outlet.

• Otherwise, it may result in electric shock or personal injury.

Installation

Safety Instructions

Ensure that the power plug is plugged into the power outlet firmly and correctly.

• Otherwise, this may result in fire.

Do not forcefully bend or pull the power plug and do not place any heavy material on it.

• Otherwise, this may result in fire.

Do not connect multiple appliances to the same power outlet.

• Otherwise, this may cause fire due to overheating.

Do not disconnect the power cord while using the product.

• Otherwise, this may result in damage to the product due to electric shock.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• This may cause electric shock or fire.

Use only the power cord provided by our company. Do not use the provided power cord of another product.

• Otherwise, this may result in fire or electric shock.

Connect the power plug to a wall outlet that can be easily reached.

• When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product.

Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc.

Failure to do so may cause serious damage to your monitor.

Ensure that at least two persons lift and move the product.

• Otherwise, it may be dropped and cause personal injury, and/ or damage the product.

When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out.

• Otherwise, it may fall or cause personal injury.

Clean

Safety Instructions

• Use a cabinet or rack of a size appropriate to the product.

DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGA-

RETTES AND ANY HEATING APPLIANCES NEAR THE PROD-

UCT.

• Otherwise, this may result in fire.

Keep heating appliances as far away from the power cord or the product as possible.

• Otherwise, this may result in electric shock or fire.

Do not install it in a badly ventilated location such as a bookcase or closet.

• Otherwise, this may result in fire due to an increase in the internal temperature.

When putting the product down, make sure to put it down softly.

• Otherwise, this may result in damage to the screen display.

Do not place the front of the product on the floor.

• Otherwise, this may result in damage to the screen display.

Ensure that an authorized installation company installs the wall mount.

• Otherwise, it may fall and cause personal injury.

• Make sure to install the specified wall mount.

Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall.

• Otherwise, it may result in fire due to an increase in the internal temperature.

Ensure that the packaging vinyl is kept away from children.

• Otherwise, it may result in serious harm (suffocation) if children play with it.

If the height of your monitor is adjustable, do not place any object or part of your body on the stand when lowering it.

• This may cause damage to the product or the person carrying it.

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric.

Others

Safety Instructions

Do not spray cleaner directly onto the surface of the product.

• Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off.

When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth.

• Otherwise, it may result in fire.

When cleaning the product, make sure to disconnect the power cord.

• Otherwise, it may result in electric shock or fire.

When cleaning the product, disconnect the power cord and clean it softly with a dry cloth.

• (Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant, lubricant, or cleaner.) These may change the appearance of the product surface and peel off the indication labels on the product.

Since the product housing is easily scratched, make sure to use the specified cloth only.

When cleaning the product, do not spray water directly onto the main body of the product.

• Ensure that water does not enter the product and that it is not wet.

• Otherwise, this may result in electric shock, fire or a malfunction.

The product is a high voltage product. Ensure that users do not disassemble, repair or modify the product themselves.

• Otherwise, this may result in electric shock or fire. If the product needs to be repaired, contact a Service Center.

If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and contact a Service Center.

• Otherwise, this may result in electric shock or fire.

Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car.

• Otherwise, this may result in electric shock or fire.

Safety Instructions

When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center.

• Otherwise, this may result in electric shock or fire.

If thunder or lightening is occurring, do not touch the power cord or antenna cable.

• Otherwise, this may result in electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal cable.

• Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.

Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables.

• Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.

Make sure that the ventilating opening is not blocked by a table or curtain.

• Otherwise, it may result in fire due to an increase in the internal temperature.

Do not place any containers containing water, vases, flowerpots, medicines as well as any metal on the product.

• If water or a foreign material enters the product, disconnect the power cord and contact a Service Center.

• This may result in a product malfunction, electric shock, or fire.

Do not use or keep combustible spray or flammable material near the product.

• Otherwise, this may result in an explosion or fire.

Do not insert any metal, such as chopsticks, coins, pins and steel, or flammable objects, such as matches or paper, inside the product (through the ventilating openings, input and output terminals, etc).

• If water or foreign material enters the product, disconnect the power cord and contact a Service Center.

• Otherwise, this may result in electric shock or fire.

When using a fixed screen for a long time, an afterimage or stain may occur.

• If you are not using your product for a long period of time, put it into sleep mode or use a moving screen saver.

Set a resolution and frequency appropriate to the product.

• Otherwise, your eyesight may be damaged.

Safety Instructions

When using headphones or earphones, do not turn the volume too high.

• Having the sound too loud may damage your hearing.

To avoid eyestrain, do not sit too close to the product.

Take a rest for at least five (5) minutes after using the monitor for one (1) hour.

This reduces eye fatigue.

Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations.

• Otherwise, it may fall and cause personal injury and/or damage the product.

• If you use the product in a location exposed to vibrations, it may damage the product and result in fire.

When moving the product, turn the power off and disconnect the power plug, antenna cable, and all the cables connected to the product.

• Otherwise, it may result in electric shock or fire.

Ensure that children do not hang onto the product or climb up onto the product.

• The product may fall and cause personal injury or death.

If you do not use the product for a long period of time, disconnect the power cord from the power outlet.

• Otherwise, this may result in overheating or fire due to dust, and may result in fire due to electric shock or leakage.

Do not place any heavy items or toys or confectionery, such as cookies etc. that may attract the attention of children and to the product.

• Your children may hang onto the product causing it to fall and this may result in personal injury or death.

Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach.

• If children have had the battery in their mouths, consult your doctor immediately.

When replacing the battery, insert it with right polarity (+, -).

• Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid.

Safety Instructions

Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time.

• Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to a leakage of the internal liquid.

The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.

• The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery.

Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater.

• This may reduce the lifetime of the product, and may result in fire.

Do not drop any objects onto the product or cause any impact to the product.

• Otherwise, this may result in electric shock or fire.

Do not use a humidifier or kitchen table near the product.

• Otherwise, this may result in electric shock or fire.

When there is a gas leak, do not touch the product or the power plug but ventilate immediately.

• If a spark occurs, it may cause an explosion or fire.

If the product has been turned on for a long time, the display panel becomes hot. Do not touch it.

Keep the small accessories in a location out of the reach of children.

Be careful when adjusting the angle of the product or the height of the stand.

• This may result in personal injury as your hand or fingers may become caught.

• Also, if you tilt the product too far, it may fall and cause personal injury.

Do not install the product in a location low enough for children to reach.

• Otherwise, it may fall and result in personal injury.

Safety Instructions

• Since the front part of the product is heavy, install the product on a level and stable surface.

Do not put any heavy objects on the product.

• This may result in personal injury and/or damage to the product.

Introduction

Package Contents

Note

Please make sure the following items are included with your LCD Display.

If any items are missing, contact your dealer.

Contact a local dealer to buy optional items.

Unpacking

LCD Display

Manuals

Quick Setup Guide Warranty Card

(Not available in all locations)

MagicInfo

Software DVD

(Applicable to the DRn model only)

Cables

Power Cord

User Manual

Introduction

Others

Remote Control Batteries (AAA X 2)

(Not available in all locations)

Sold separately

DVI Cable TV tuner box LAN Cable

(Applicable to the DRn model only)

Note

• You can purchase and connect a separate network box or TV tuner box. For information on how to use these, refer to their respective user manuals.

• You can only connect one external box.

• Accessories that can be purchased with the product vary by country.

Your LCD Display

Front

Note

The buttons are on the right at the back of your product.

Introduction

MENU button [MENU]

Opens the on-screen menu and exits from the menu. Also use to exit the

OSD menu or return to the previous menu.

Navigate buttons (Up-Down buttons)

Moves from one menu item to another vertically or adjusts selected menu values.

Adjust buttons (Left-Right buttons) / Volume buttons

Moves from one menu item to another horizontally or adjusts selected menu values. When OSD is not on the screen, push the button to adjust volume.

ENTER button [ENTER]

Activates a highlighted menu item.

SOURCE button [SOURCE]

Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the LCD Display at the time.

[PC] → [DVI] → [AV] → [HDMI] → [MagicInfo] → [TV]

Note

• The TV menu is available when a TV tuner box is installed.

• The MagicInfo menu is available in DRn models.

D.MENU

Opens the on-screen D.MENU.

Note

• This is available when a TV tuner box is installed.

Power button [ ]

Use this button for turning the LCD Display on and off.

Brightness Sensor

The Brightness Sensor detects the surrounding light intensity and automatically optimizes the screen brightness accordingly.

Power indicator

Shows PowerSaver mode by blinking green

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display

OFF when it is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Introduction

Rear

Note

See the "Connections" section for details about cable connections. The LCD Display's configuration at the back may vary slightly depending on the model.

POWER S/W ON [ │ ] / OFF [O]

Switches the LCD Display On/Off.

POWER IN

The power cord plugs into the LCD Display and the wall plug.

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

DVI/PC/HDMI AUDIO IN (PC/DVI/HDMI

Audio Connection Terminal (Input))

Connect the [DVI/PC/HDMI AUDIO IN] terminal of the monitor and the speaker output terminal of your computer's sound card using a stereo cable (sold separately).

HDMI IN

Connect the [HDMI IN] terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable.

RGB IN (PC Video Connection Terminal)

Connect the [RGB IN] port on the monitor to the RGB port on the PC using the D-SUB cable.

DVI IN (PC Video Connection Terminal)

Introduction

Connect the [DVI IN] port on the monitor to the DVI port on the PC using the DVI cable.

DC OUT

Make sure to use connecting DC-OUT terminal to the authorized TV-Tuner Box[SBB-

DT*].

Otherwise, this may result in damage to the product.

VIDEO IN (VIDEO Connection Terminal)

Connect the [VIDEO IN] terminal of your monitor to the video output terminal of the external device using a VIDEO cable.

AV AUDIO IN [L-AUDIO-R](LCD Display

Audio Connection Terminal (Input))

AV AUDIO OUT [L-AUDIO-R] (LCD Display Audio Connection Terminal (Output))

RGB OUT

(Applicable to the DRn model only)

LAN (LAN Connection Terminal)

(Applicable to the DRn model only)

USB (USB Connection Terminal)

Keyboard / Mouse, Mass Storage Device

Compatible.

(Applicable to the DRn model only)

Note

See Connecting Cables for further information regarding cable connections.

Remote Control

Note

The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency.

1. POWER

2. Off

3.Number Buttons

Introduction

POWER

OFF

Number Buttons

DEL

+ VOL -

MUTE

TV/DTV

MENU

button

INFO

COLOR BUTTONS

TTX/MIX

STILL

AUTO

S.MODE

MDC

LOCK

SOURCE

ENTER/PRE-CH

CH/P

D.MENU

GUIDE

RETURN

Up-Down Left-Right buttons

EXIT

SRS

MagicInfo

P.MODE

DUAL/MTS

PIP

SWAP

Turns the product On.

Turns the product Off.

Press to change the channel.

4. DEL button

5. + VOL -

6. MUTE

7. TV/DTV

8. MENU

9.

10.

INFO

11.Color Buttons

12.

TTX/MIX

13.STILL

14.AUTO

15. S.MODE

16.MDC

17.LOCK

18. SOURCE

Introduction

The "-" button operates only for DTV. It is used to select

MMS (multi-channel) for a DTV.

- This fuction does not work for this LCD Display.

Adjusts the audio volume.

Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode.

Selects the TV and DTV mode directly.

- This fuction does not work for this LCD Display.

Opens the on-screen menu and exits from the menu or closes the adjustment menu.

Activates a highlighted menu item.

Current picture information is displayed on the upper left corner of the screen.

Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu.

- This fuction does not work for this LCD Display.

TV channels provide written information services via teletext.

- This fuction does not work for this LCD Display.

- Teletext Buttons

Press the button once to freeze the screen. Press it again to unfreeze.

Adjusts the screen display automatically in PC mode. By changing the resolution in the control panel, auto function is performed.

When pressing this button, the current mode is displayed at the bottom centre of the screen. The LCD Display has a built-in high fidelity stereo amplifier. Then press the button again to circle through available preconfigured modes.

( StandardMusicMovieSpeechCustom )

MDC Quick Launch Button.

Activates or deactivates all function keys on both the remote control and the LCD Display except for the Power and LOCK buttons.

Press the button to change the input signal SOURCE.

Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time.

Introduction

19.

ENTER/PRE-CH

20. CH/P

21.D.MENU

22.GUIDE

23.

RETURN

24. Up-Down Left-Right buttons

25.

EXIT

26.

SRS

27.MagicInfo

28. P.MODE

This button is used to return to the immediately previous channel.

- This fuction does not work for this LCD Display.

In TV mode, selects TV channels.

- This fuction does not work for this LCD Display.

DTV menu display

- This fuction does not work for this LCD Display.

Electronic Program Guide (EPG) display.

- This fuction does not work for this LCD Display.

Returns to the previous menu.

Moves from one menu item to another horizontally, vertically or adjusts selected menu values.

Exits from the menu screen.

SRS TS XT

MagicInfo Quick Launch Button.

- This fuction does not work for this LCD Display.

When you press this button, current picture mode is displayed on the lower center of the screen.

AV / HDMI / TV : P.MODE

The LCD Display has four automatic picture settings that are preset at the factory. Then push button again to circle through available preconfigured modes. ( Dynamic

Standard

MovieCustom )

29. DUAL/MTS

PC / DVI / MagicInfo: M/B (MagicBright)

MagicBright

is a feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. (EntertainInternetText

Custom

)

- This fuction does not work for this LCD Display.

DUAL-

STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM

MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV.

MTS-

30. PIP

31.SWAP

Introduction

You can select MTS (Multichannel Television Stereo) mode.

FM Stereo

Audio Type MTS/S_Mode Default

Mono

Stereo

Mono

Mono ↔ Stereo

Manual

Change

SAP Mono ↔ SAP Mono

Every time you press the button, a PIP screen appears.

- This fuction does not work for this LCD Display.

Swaps the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window.

- This fuction does not work for this LCD Display.

Connections

Connecting a Computer

Note

AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display.

Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Turn on the power switch.

There are 2 ways to connect the D-sub to your LCD Display. Choose one of the following:

Using the D-sub (Analog) connector on the video card.

• Connect the D-sub to the 15-pin, [RGB IN] port on the back of your LCD

Display and the 15 pin D-sub Port on the computer.

Using the DVI (Digital) connector on the video card.

• Connect the DVI Cable to the [DVI IN] port on the back of your LCD

Display and the DVI port on the computer.

Connect the audio cable for your LCD Display to the audio port on the back of your computer.

Note

• Turn on both your computer and the LCD Display.

Connections

• Contact a local SAMSUNG Electronics Service Center to buy optional items.

Connecting to Other devices

Note

AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display.

Connecting AV Devices

1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [AV AUDIO IN [L-

AUDIO-R]] port of the LCD Display.

2. Connect the video output terminal of the AV device and the [VIDEO IN] of the monitor using a video cable.

3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.

4. Select AV using the SOURCE .

Note

The LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRs or Camcorders. You may enjoy AV signals as long as the LCD Display is turned on.

Connecting to a Camcorder

1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV AUDIO IN [L-AUDIO-R]] on the LCD Display .

Connections

2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the

[VIDEO IN] on the LCD Display .

3. Select AV for the Camcorder connection using the SOURCE button on the front of the

LCD Display or on the remote control.

4. Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Connecting Using a HDMI Cable

Note

• Input devices such as digital DVD are connected to the [HDMI IN] terminal of the LCD

Display using the HDMI cable.

Connecting Using a DVI to HDMI Cable

1. Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of the LCD Display using a DVI to HDMI cable.

2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the

[DVI/PC/HDMI AUDIO IN] terminal of the LCD Display.

Connecting to an Audio System

Connections

Note

• Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and

[AUDIO OUT [L-AUDIO-R]] on LCD Display.

Connecting a LAN Cable

Note

Applicable to the DRn model only

AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display.

Connect the LAN cable.

Connecting a USB device

Note

Applicable to the DRn model only

AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display.

Connections

You can connect USB devices such as a mouse or keyboard.

Using the Software

MDC

Installation

1. Insert the installation CD into the CD-ROM drive.

2. Click the MDC installation file.

Note

If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MDC executable file on the CD.

3. When the Installation Shield Wizard window appears, click "Next".

4. Select "I agree to the terms of the license agreement" to accept the terms of use.

5. Click "Install".

6. The "Installation Status" window appears.

7. Click "Finish".

8. When the installation is complete, the MDC executable icon appears on your desktop.

Double-click the icon to start the program.

MDC execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key.

Installation Problems

The installation of MDC can be affected by such factors as the video card, motherboard and the network environment.

Uninstall

The MDC program can be removed only by using the "Add or Remove Programs" option of the Windows ® Control Panel.

Perform the following steps remove MDC.

Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program".

Select MDC from the list and then click the "Add/Delete" button.

Using MDC

Introduction

A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display.

Main Screen

Click Start > Program > Samsung > MDC System to start the program.

Select a set to see the volume of the selected set within the slider.

Main Icons

Remocon

Safety Lock

Port Selection

Select Button

Info Grid

Display Selection

Control Tools

1. Use the main icons to switch into each screen.

2. Allows you to enable or disable the remote control signal receiving function of the display unit.

3. Set the Safety Lock function.

When setting the Lock function, you can only operate power and lock buttons on the remote control and set.

4. The setting for the PC Serial Port can change. The original value is COM1.

5. Click Select all or Clear to select or clear all displays.

6. Use Grid to view brief information on selected display.

7. Select a display from Display Selection.

8. Use Control Tools to control displays.

<Note> The remote control Enable/Disable function operates whether or not the power is On/Off, and this applies to all displays connected to the MDC. However, regardless of the status at the time the MDC is shut down, the remote control signal receiving function of all displays is initialized to Enable when the

MDC is closed.

Port Selection

1. The Multiple Display Control is originally set to COM1.

2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu.

3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable.

4. The selected port is stored in the program and used for the next program as well.

Power Control

1. Click Power Control of the main icons and the Power Control screen appears.

Info Grid shows some basic information necessary to Power Control.

1) (Power Status)

3) Image Size

5) Off Timer

2. Use the Select All button or Check Box to choose a display to control.

Power Control allows controlling some of the functions of the selected display.

1) Power On/Off

- Turns the power of the selected display On/Off.

2) Volume

- Controls the volume level of the selected display.

It receives the volume value of the selected display from the sets and displays it in the slider.

(When you cancel the selection or choose Select All, the value returns to the default value 10)

3) (Mute On/Off)

- Turns on/off the Mute function of the selected display.

When selecting one set at a time, turn on the Mute function for the selected set.

The Mute function is disabled automatically when you adjust the volume level.

(The values return to the default settings when you undo the selections or choose "Select All".)

The Power Control feature is available for all displays.

The Volume Control and Mute features are available only for the displays whose power status is ON.

Input Source

1. Click Input Source of the main icons and the Input Source control screen appears.

Click Select All or use Check Box to select a display to control.

• TV Mode

• PC Mode

1)

2)

3)

4)

5)

6)

7)

8)

Info Grid shows some basic information necessary to Input Source Control.

PC

- Changes the Input Source of the selected display to PC.

BNC

- Changes the Input Source of the selected display to BNC.

DVI

- Changes the Input Source of the selected display to DVI.

TV

- Changes the Input Source of the selected display to TV.

DTV

- Changes the Input Source of the selected display to DTV.

AV

- Changes the Input Source of the selected display to AV.

S-Video

- Changes the Input Source of the selected display to S-Video.

Component

- Changes the Input Source of the selected display to Component.

9) MagicInfo

- The Input source of MagicInfo works only on MagicInfo model.

10) HDMI

- Changes the Input Source of the selected display to HDMI.

11) Channel

- Channel arrow appears when the Input Source is TV.

TV Source can be selected only in products with TV and controlling channels is allowed only when

Input Source is TV.

The Input Source Control feature is available only for the displays whose power status is ON.

Image Size

PC, BNC, DVI

1. Click Image Size of the main icons and the Image Size control screen appears.

1)

Info Grid shows some basic information necessary to Image Size Control.

( Power Status)

- Shows the power status of the current display.

2) Image Size

- Shows the current Image Size of the display in use.

3) Input

- Info Grid displays only the displays whose Input Source is PC, BNC, DVI.

4) PC Source

- When you click Image Size, the PC Source tab first appear.

- The Image Size Control button controls Image Size available for PC, BNC, DVI.

5) Video Source

- Click the Video Source tab to control Image Size for respective Input Source.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

Image Size Control is available only for the displays for which power status is ON.

Image Size

TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV

1. Click Image Size of the main icons and the Image Size control screen appears.

Info Grid shows some basic information necessary to Image Size Control.

1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV.

Click Select All or use Check Box to select a display to control.

2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source.

3) Switch Image Size of the selected display randomly.

Note: Auto Wide, Zoom1 and Zoom2 are not available for selection when the input signal type for

Component and DVI (HDCP) is 720p or 1080i.

(The Auto Wide mode is available only for TV, AV, and S-Video.)

4) The screen modes can only be adjusted when a TV (PAL only) is connected and the Image Size item is set to Auto

Wide.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

The Image Size Control feature is available only for the displays whose power status is ON.

Time

1. Click Time of the main icons and the Time Control screen appears.

Info Grid shows some basic information necessary to Time Control.

1) Current Time

- Set the current time for the selected display (PC Time).

- To change the current time, first change the PC Time.

2) On Time Setup

- Set the Hour, Minute, AM/PM of On Time Setup, Status, Source, Volume of the selected display.

3) Off Time Setup

- Set the Hour, Minute, and AM/PM, Status for Off Time Setup of the selected display.

4) Shows the On Time settings.

5) Shows the Off Time settings.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

Time Control is available only for the displays for which the power status is ON.

At On Time Setup, TV Source functions only for TV Model.

At On Time Setup, MagicInfo Source functions only for MagicInfo Model.

PIP

PIP Size

1. Click PIP of the main icons and the PIP control screen appears.

Click Select All or use Check Box to select a display to control.

Info Grid shows some basic information necessary to PIP Size Control.

1) PIP Size

- Shows the current PIP Size of the display in use.

2) OFF

- Turns off the PIP of the selected display.

3) Large

- Turns on the PIP of the selected display and changes the size to Large.

4) Small

- Turns on the PIP of the selected display and changes the size to Small.

5) Double 1

- Turns on the PIP of the selected display and changes the size to Double 1.

6) Double 2

- Turns on the PIP of the selected display and changes the size to Double 2.

7) Double 3 (Picture By Picture)

- Turns on the PBP of the selected display and changes the size to Double 3.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

PIP Size can be controlled with turning on the LCD Display power.

PIP

PIP Source

1. Click PIP of the main icons and the PIP control screen appears.

Info Grid shows some basic information necessary to PIP Source Control.

1) PIP Source

- PIP Source can be controlled with turning on the LCD Display power.

2) PC

- Changes the source of the PIP of the selected display to PC.

3) BNC

- Changes the source of the PIP of the selected display to BNC.

4) DVI

- Changes the source of the PIP of the selected display to DVI.

5) AV

- Changes the source of the PIP of the selected display to AV.

6) S-Video

- Changes the source of the PIP of the selected display to S-Video.

7) Component

- Changes the source of the PIP of the selected display to Component.

8) HDMI

- Changes the source of the PIP of the selected display to HDMI.

Note: Some of the PIP Sources may not be available for selection, depending on the input source type of the Main Screen.

The Input source of MagicInfo works only on MagicInfo model.

The PIP Control feature is available only for the displays whose power status is ON and the PIP function is set to ON.

Settings

Picture

1. Click Settings of the main icons and the Settings Control screen appears.

Info Grid shows some basic information necessary to Settings Control.

When each function is selected, the set value of the selected function is displayed in the slide.When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM."

1) Picture

- Available only for TV, AV, S-Video, Component, HDMI, DTV.

2) Contrast

- Adjusts Contrast of the selected display.

3) Brightness

- Adjusts Brightness of the selected display.

4) Sharpness

- Adjusts Sharpness of the selected display.

5) Color

- Adjusts Color of the selected display.

6) Tint

- Adjusts Tint of the selected display.

- Available only for NTSC.

7) Color Tone

- Adjusts the Color Tone for the selected display.

8) Color Temp

- Adjusts the Color Temp for the selected display.

9) Brightness Sensor

- Adjusts the Brightness Sensor for the selected display.

10) Dynamic Contrast

- Adjusts the Dynamic Contrast for the selected display.

The Input source of MagicInfo works only on MagicInfo model.

Color Temp is only enabled if the Color Tone is set to Off.

The Input source of TV works only on TV model.

This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.

Settings

Picture PC

1. Click Settings of the main icons and the Settings Control screen appears.

Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM."

1) Picture PC

- Available only for PC, BNC, DVI.

2) Contrast

- Adjusts Contrast of the selected display.

3) Brightness

- Adjusts Brightness for the selected display.

4) Red

- Adjusts red Color of the selected display.

- Available only for NTSC.

5) Green

- Adjusts green Color of the selected display.

- Available only for NTSC.

6) Blue

- Adjusts blue Color of the selected display.

- Available only for NTSC.

7) Color Tone

- Adjusts the Color Tone for the selected display.

8) Color Temp

- Adjusts the Color Temp for the selected display.

9) Brightness Sensor

- Adjusts the Brightness Sensor for the selected display.

10) Dynamic Contrast

- Adjusts the Dynamic Contrast for the selected display.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

Color Temp is only enabled if the Color Tone is set to Off.

This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.

Settings

Audio

1. Click Settings of the main icons and the Settings Control screen appears.

Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM."

1) Audio

- Controls audio settings for all input sources.

2) Bass

- Adjusts Bass of the selected display.

3) Treble

- Adjusts Treble of the selected display.

4) Balance

- Adjusts Balance of the selected display.

5) SRS TS XT

- SRS TS XT Sound ON/OFF of the selected display.

6) Sound Select

- Select either Main or Sub when PIP is On.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.

Settings

Image Lock

1. Click Settings of the main icons and the Settings Control screen appears.

Info Grid shows some basic information necessary to Settings Control.

1) Image Lock

- Available only for PC, BNC.

2) Coarse

- Adjusts Coarse of the selected display.

3) Fine

- Adjusts Fine of the selected display.

4) Position

- Adjusts Position of the selected display.

5) Auto Adjustment

- Self-Adjust to the incoming PC signal.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

Settings Control is available only for the displays for which the power status is ON.

Maintenance

Lamp Control

1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen.

An "Info Grid" showing several basic data items appears.

1) Maintenance

- Allows the Maintenance Control function for all input sources.

2) Auto Lamp Control

- Automatically adjusts the backlight of the selected display at a specified time.

The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control.

3) Manual Lamp Control

- Allows you to adjust the backlight of the selected display regardless of the time.

The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control.

The Maintenance Control feature is available only for the displays whose power status is ON.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

Maintenance

Scroll

1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen.

1) Scroll

- This function is used to remove the afterimages that occur when a still screen is displayed on the selected display for a long time.

2) Pixel Shift

- This allows the screen to be moved finely at the specified time interval.

3) Safety Screen

- The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time. The Interval item is used to set the repetition cycle in hour units and the Time item is used to set the time when the Safety Screen function must be performed.

The Type item can be set to Scroll, Pixel, Bar, Eraser, All White, or Pattern.

4) Safety Screen2

- This function is used to prevent afterimages from occurring. There are five (5) types that you can select and control with this function.

For the Scroll type, the Time item can be set to 1, 2, 3, 4 or 5. For the Bar and Eraser types, it can be set

to 10, 20, 30, 40 or 50. For the All White and Pattern type, it can be set to 1, 5, 10, 20 or 30.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

The Maintenance Control feature is available only for the displays whose power status is ON.

Maintenance

Video Wall

1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen.

1) Video Wall

- A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.

2) Video Wall (Screen divider)

- The screen can be divided into.

You can select a number of screens with a different layout when dividing. z z

Select a mode from Screen divider.

Select a display from Display Selection. z z

The place will be set up by pressing a number in the selected mode.

The MDC program supplied by Samsung supports up to 5x5 LCD Displayes.

3) On / Off

- Turns on/off the Video Wall function of the selected display.

4) Format

- The format can be selected to see a divided screen. z

Full z

Natural

You may not operate this function in MagicInfo.

The Input source of TV works only on TV model.

The Maintenance Control function is available only for the displays where the power status is ON.

Troubleshooting

1. The display you wish to control does not appear on the Power Control Info Grid

- Check the connection of RS232C. (Check if it is properly connected to the Com1 port)

- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict.

- Check if the Display Set ID is a number between 0 and 25. (Adjust using the Display menu)

Note : A Display Set ID must be a value between 0 and 25 .

2. The display you wish to control does not appear on the other Control Info Grids

- Check to see if the display power is ON. (You can check this in Power Control Info Grid)

- Check if you can change the input source of the display.

3. The dialogue box appears repeatedly.

- Check to see if the display you wish to control is selected.

4. Both On Timer and Off Timer have been set but different time is showing.

- Apply current time to synchronize the display clocks.

5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal functions.

<Note> This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby.

Settings Value Display In Multiple Display Mode

When there are more than one displays connected, the settings values are displayed as follows.

1. No selection: Displays the Factory Default Value.

2. Selected one display: Fetches and displays the settings value for the selected display.

3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of

ID 1, fetches and displays the value of ID3.

4. Selected all sets using Select All: Returns to the Factory Default Value.

Adjusting the LCD Display

Input

Available Modes

PC / DVI

AV

HDMI

MagicInfo

TV

Note

• The MagicInfo menu is available in DRn models.

• The TV menu is available when a TV tuner box is installed.

Source List

Use to select PC, DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice.

1. PC

2. DVI

3. AV

4. HDMI

This is deactivated when a TV tuner box is installed.

5. MagicInfo

6. TV

This is activated when a TV tuner box is installed.

Note

• The direct button on the remote control is the 'SOURCE' button.

Edit Name

Adjusting the LCD Display

Name the input device connected to the input jacks to make your input source selection easier.

VCR

/ DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /

Camcorder

/ DVD Combo / DHR / PC

Note

• When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC. In other cases, set Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p

(1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal.

• The Picture menu changes depending on the input signal and Edit Name.

Picture [PC / DVI / MagicInfo Mode]

Available Modes

PC / DVI

AV

HDMI

MagicInfo

TV

Note

• The MagicInfo menu is available in DRn models.

• The TV menu is available when a TV tuner box is installed.

MagicBright

Adjusting the LCD Display

MagicBright

is a feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Enter- tain

, Internet, Text and Custom. Each mode has its own pre-configured brightness value.

(Not available in Dynamic Contrast mode of On.)

1. Entertain

High brightness

For watching motion pictures such as a DVD or VCR.

2. Internet

Medium brightness

For working with a mixture of images such as texts and graphics.

3. Text

Normal brightness

For documents or works involving heavy text.

4. Custom

Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.

If this is the case, adjust the brightness and contrast by using the OSD menu.

Custom

By using the on-screen menus, the contrast and brightness can be changed to your personal preference.

(Not available in Dynamic Contrast mode of On.)

Note

By adjusting the picture using the Custom function, MagicBright will change to Custom mode.

Contrast

Adjusts the Contrast.

Brightness

Adjusts the Brightness.

Sharpness

Adjusts the Sharpness.

Color Tone

Adjusting the LCD Display

The color tones can be changed.

(Not available in Dynamic Contrast mode of On.)

1. Off

2. Cool

3. Normal

4. Warm

5. Custom

Color Control

Adjusts individual Red, Green, Blue color balance.

(Not available in Dynamic Contrast mode of On.)

Note

If you adjust the picture by using the Color Control function, Color Tone will turn to the

Custom

mode.

Red

Note

If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled.

If you set the Color Tone to Off, the Color Control function is disabled

Adjusting the LCD Display

Green

Blue

Color Temp.

Image Lock

Image Lock

is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the

Fine adjustment, use the Coarse adjustment and then use Fine again.

(Available in PC mode only)

Coarse

Color Temp

is a measure of the 'warmth' of the image colors.

(Not available in Dynamic Contrast mode of On.)

Note

This function is only enabled if the Color Tone is set to Off.

Fine

Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.

Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

H-Position

Adjusts the screen location horizontally.

V-Position

Adjusts the screen location vertically.

Adjusting the LCD Display

Auto Adjustment

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.

(Available in PC mode only)

Note

The direct button on the remote control is the 'AUTO' button.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.

(Available in PC mode only)

(Not available in Dynamic Contrast mode of On.)

Signal Balance

Selects either On or Off with the signal control.

Signal Control

1. R-Gain

2. G-Gain

3. B-Gain

4. R-Offset

5. G-Offset

Size

6. B-Offset

Adjusting the LCD Display

The Size can be switched.

1. 16:9

2. 4:3

Dynamic Contrast

Dynamic Contrast

automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.

1. Off

2. On

Brightness Sensor

Brightness Sensor

automatically detects the distribution of inputted visual signal and adjusts to create an optimum brightness.

1. Off

2. On

Picture [ AV / HDMI / TV Mode]

Available Modes

PC / DVI

Mode

Adjusting the LCD Display

AV

HDMI

MagicInfo

TV

Note

• The MagicInfo menu is available in DRn models.

• The TV menu is available when a TV tuner box is installed.

The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and

"Custom") that are preset at the factory.

Dynamic

, Standard, Movie, or Custom can be activated.

(Not available in Dynamic Contrast mode of On.)

1. Dynamic

2. Standard

3. Movie

4. Custom

Note

The direct button on the remote control is the 'P.MODE' button.

Custom

By using the on-screen menus, the contrast and brightness can be changed to your personal preference.

(Not available in Dynamic Contrast mode of On.)

Contrast

Adjusts the Contrast.

Brightness

Adjusts the Brightness.

Sharpness

Adjusting the LCD Display

Color

Adjusts the picture Sharpness.

Tint

Adjusts the picture Color.

Adds a natural tone to the display.

Color Tone

The color tones can be changed. The individual Color components are also user adjustable.

(Not available in Dynamic Contrast mode of On.)

1. Off

2. Cool2

3. Cool1

4. Normal

5. Warm1

6. Warm2

Note

If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp function is disabled.

Adjusting the LCD Display

Color Temp.

Size

Color temp

is a measure of the 'warmth' of the image colors.

(Not available in Dynamic Contrast mode of On.)

Note

This function is only enabled if the Color Tone is set to Off.

The Size can be switched.

1. 16:9: Sets the picture to 16:9 wide mode.

2. Zoom 1: Magnifies the size of the picture on the screen.

3. Zoom 2: Magnifies the size of the picture more than Zoom 1.

4. 4:3: Sets the picture to 4:3 normal mode.

5. Just Scan: Displays the input scenes as they are without any cutoff when HDMI 720p,

1080i, 1080p signals are input.

Note

Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature.

Zoom 1

, Zoom 2 will be unavailabel in HDMI mode.

Note

The Position and Reset functions are available when Zoom 1 or Zoom 2 is run.

Digital NR (Digital Noise Reduction)

Adjusting the LCD Display

Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images.

1. Off

2. On

Note

Digital NR

function is not available for all resolutions.

Film Mode

The Film Mode feature offers you a theater-quality viewing experience.

(In HDMI mode, this function can be available when the input signal is interlaced scan; it cannot be available with progressive scan signal.)

1. Off

2. On

Dynamic Contrast

Dynamic Contrast

automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.

1. Off

2. On

Brightness Sensor

The Brightness Sensor detects the surrounding light intensity and automatically optimizes the screen brightness accordingly.

Adjusting the LCD Display

Sound

1. Off

2. On

Available Modes

PC / DVI

AV

HDMI

MagicInfo

TV

Note

• The MagicInfo menu is available in DRn models.

• The TV menu is available when a TV tuner box is installed.

Mode

The LCD Display has a built-in high fidelity stereo amplifier.

1. Standard

Selects Standard for the standard factory settings.

2. Music

Selects Music when watching music videos or concerts.

3. Movie

Selects Movie when viewing movies.

4. Speech

Selects Speech when watching a show that is mostly dialogue (i.e., news).

5. Custom

Selects Custom if you want to adjust the settings according to your personal preferences.

Adjusting the LCD Display

Custom

The sound settings can be adjusted to suit your personal preferences.

Note

• You can hear the sound even when sound value is set to 0.

• If you adjust sound using Custom function, Mode will turn to Custom mode.

Bass

Treble

Emphasizes low frequency audio.

Balance

Emphasizes high frequency audio.

Allows you to Adjusts the sound balance between the left and right speakers.

Auto Volume

Reduces the difference in volume control between broadcasters.

1. Off

2. On

SRS TS XT

SRS TS XT

is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound ex-

Adjusting the LCD Display perience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

1. Off

2. On

Note

The direct button on the remote control is the 'SRS' button.

Setup

Available Modes

PC / DVI

AV

HDMI

MagicInfo

TV

Note

• The MagicInfo menu is available in DRn models.

• The TV menu is available when a TV tuner box is installed.

Language

You can choose one of 13 languages.

Note

The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.

Time

Selects from one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer.

Adjusting the LCD Display

Clock Set

Current Time Setting.

Sleep Timer

Turns the LCD Display off automatically at certain times.

1. Off

2. 30

3. 60

4. 90

5. 120

6. 150

7. 180

On Timer

Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically.

Adjusting the LCD Display

Off Timer

Turns the LCD Display off automatically at a preset time.

Menu Transparency

Change the transparency of the background of the OSD.

1. High

2. Medium

3. Low

4. Opaque

Safety Lock PIN

The password can be changed.

Note

The preset password for the LCD Display is "0000".

Energy Saving

Adjusting the LCD Display

This feature adjusts the power consumption of the unit in order to save energy.

1. Off

2. On

HDMI Black Level

When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level.

1. Normal

2. Low

Video Wall

A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen.

When the Video Wall is on, you can adjust the Video Wall screen setting.

Note

When Video Wall is running, the Auto Adjustment, Image Lock, and Size functions are not available. Video Wall does not operate in MagicInfo mode.

Video Wall

Adjusting the LCD Display

Format

Turns Off/On the Video Wall function of the selected display Off/On.

1. Off

2. On

The Format can be selected to see a divided screen.

1. Full

Provides a full screen without any margins.

2. Natural

Displays a natural image with the original aspect ratio intact.

Horizontal

Vertical

Sets how many parts the screen should be divided horizontally.

Five adjustment levels: 1, 2, 3, 4, and 5.

Sets how many parts the screen should be divided vertically.

Five adjustment levels: 1, 2, 3, 4, and 5.

Screen Divider

Adjusting the LCD Display

The screen can be divided into several images. A number of screens can be selected with a different layout when dividing.

• Select a mode in Screen Divider.

• Select a display in Display Selection.

• The selection will be set up by pressing a number in the selected mode.

Safety Screen

The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time.

• The Safety Screen function scrolls the screen for the specified period of time.

• This function is not available when the power is turned off.

Pixel Shift

Pixel Shift

To prevent after-images on the screen you can use this function, so that every minute pixels on the LCD are moved in horizontal or vertical direction.

1. Off

2. On

Horizontal Dot

Adjusting the LCD Display

Sets how many pixels the screen moves horizontally.

Five adjustment levels: 0, 1, 2, 3, and 4.

Vertical Line

Time

Sets how many pixels the screen moves vertically.

Five adjustment levels: 0, 1, 2, 3, and 4.

Timer

Timer

Set the time interval for performing the horizontal or vertical movement, respectively.

You can set the timer for Screen Burn Protection.

If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish.

1. Off

2. On

Adjusting the LCD Display

Mode

Period

You can change the Safety Screen Type.

1. Scroll

2. Bar

3. Eraser

Time

Use this function to set the execution period for each mode set in the timer.

Scroll

Within the set period of time specify a time for execution.

Mode-Scroll : 1~5 sec

Mode-Bar, Eraser : 10~50 sec

Bar

Adjusting the LCD Display

This function prevents after-images on the screen by moving all the pixels on the LCD according to a pattern.

Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

Eraser

This function prevents after-images on the screen by moving long black and white vertical lines.

This function prevents after-images on the screen by moving a rectangular pattern.

Resolution Select

When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution.

Note

Available in PC mode only

1. Off

2. 1024 x 768

3. 1280 x 768

Adjusting the LCD Display

4. 1360 x 768

5. 1366 x 768

Note

Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz,

1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz.

Power On Adjustment

Adjusts the Power On time for the screen.

Caution: Set the Power On time to be longer to avoid overvoltage.

Side Gray

Select the brightness of the grey for the screen background.

1. Off

2. Light

3. Dark

Reset

Reverts the product settings to factory defaults.

Image Reset

Note

Available in PC mode only

Adjusting the LCD Display

Note

The Reset function is not available when Video Wall is On.

Color Reset

OSD Rotation

OSD Rotate

1. Landscape

2. Portrait

Lamp Control

Adjusts the inverter lamp in order to reduce energy consumption.

Note

This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV,

HDMI

, TV modes.

Multi Control

Available Modes

PC / DVI

AV

HDMI

MagicInfo

TV

Note

• The MagicInfo menu is available in DRn models.

• The TV menu is available when a TV tuner box is installed.

Adjusting the LCD Display

Multi Control

Assigns an individual ID to the SET.

ID Setup

Assigns distinctive IDs to the SET.

ID Input

Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.

MagicInfo

Available Modes

PC / DVI

AV

HDMI

MagicInfo

TV

Note

• The MagicInfo menu is available in DRn models.

• The TV menu is available when a TV tuner box is installed.

Note

• For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using a separate USB keyboard.

• For MagicInfo in Device mode, moving external devices while booting may cause errors.

Set up external devices only if the LCD Display turns on.

• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop. If you do unplug the cable, restart the system.

• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop.

• To access other sources, press the SOURCE button in MagicInfo.

Adjusting the LCD Display

• The preset password for the LCD Display is "000000".

• The server program's Power-On option works only if the LCD Display's power is completely shut off.

Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display.

• In the OSD image of MagicInfo, Network mode is the same as Device.

• When using MagicInfo with the MagicInfo Server Program: perform Network mode.

• When using MagicInfo with the device directly connected to LCD Display : execute Device mode.

• Press ALT + ESC to directly go to the MagicInfo Window screen.

• To setup MagicInfo on a Windows screen, a keyboard and mouse are required.

• To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.

It is highly recommended not to turn off the AC power during an operation.

• For pivoted LCD Displays, ticker transparency is not supported.

• For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies.

• For drive D:, EWF is not applied.

• When the contents of Setup have been changed when EWF is in the Enable state, to save the changes in the disk, you must Commit them.

• By selecting Disable, Enable or Commit, the system is restarted.

MagicInfo

1. Select Application - step 1

2. Select TCP/IP - step 2

Adjusting the LCD Display

3. Select Language -step 3

4. Select Screen Type - step 4

5. Setup Information

Adjusting the LCD Display

Note

If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear.

Troubleshooting

Self-Test Feature Check

Note

Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself.

Self-Test Feature Check

1. Turn off both your computer and the LCD Display.

2. Unplug the video cable from the back of the computer.

3. Turn on the LCD Display.

The figure shown below ("Check Signal Cable") appears on a black background when the LCD Display is working normally even though no video signal is detected: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen.

4. Turn off your LCD Display and reconnect the video cable; then turn on both your computer and the LCD Display

If your LCD Display screen remains blank after using the previous procedure, check your video controller and computer system; your LCD Display is functioning properly.

Warning Messages

You can even view the screen at a resolution of 1920x1080. However, you will receive the following message for a minute; You can choose to change the screen resolution or stay in the current mode during that time. And if the resolution is more than 85Hz, you will see the black screen because the LCD Display does not support over 85Hz.

Note

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the LCD Display.

Maintenance and Cleaning

1) Maintaining the LCD Display Case.

Clean with a soft cloth after disconnecting the power cord.

Troubleshooting

• Do not use benzene, thinner or other flammable substances, or a wet cloth.

2) Maintaining the Flat Panel Display Screen.

Clean with a soft cloth (cotton flannel) smoothly.

• Never use acetone, benzene or thinner.

(They may cause flaws or deformation of the screen surface.)

• The user will be required to pay costs and related expenses for repairing damages caused.

Symptoms and Recommended Actions

Note

A LCD Display recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the LCD Display to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer.

1. Check if the power cord and the video cables are properly connected to the computer.

2. Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

3. If you installed a new video card or if you assembled the PC, check if you installed the

Adaptor(video).

4. Check if the scanning ratio of the video screen is set to between 50 Hz ~ 85 Hz.

(Do not exceed 60Hz when using the maximum resolution.)

5. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe

Mode, remove the Display Adaptor in the "Control Panel −> System −> Device Administrator" and then reboot the computer to reinstall the Adaptor (video) driver.

Check List

Note

• The following table lists possible problems and their solutions. Before calling for assistance, check the information in this section to see if you can remedy any problems for yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.

• For more network-related information, refer to the MagicInfo Troubleshooting section.

Problems related to the Installation

Note

Problems related to the LCD Display installation and their solutions are listed.

Q: The LCD Display screen flickers.

Troubleshooting

A: Check if the signal cable between the computer and the LCD Display is securely connected.

(Refer to Connecting a Computer)

Q: Shadowiness on the fringe of the panel due to technical limitations.

A: The slight shadowiness on the fringe of the panel is due to the inside sheet that is seen through the thin outer bezel, which is not a defect but a technical limitation for the panel in the slim bezel design.

Problems related to the Screen

Note

Problems related to the LCD Display screen and their solutions are listed.

Q: The screen is blank and the power indicator is off.

A: Ensure that the power cord is firmly connected and the LCD Display is on.

(Refer to the Connecting a Computer)

Q: "Check Signal Cable" message.

A: Ensure that the signal cable is firmly connected to the PC or video sources.

(Refer to the Connecting a Computer)

A: Ensure that the PC or video sources are turned on.

Q: "Not Optimum Mode" message.

A: Check the maximum resolution and the frequency of the video Adaptor.

A: Compare these values with the data in the Preset Timing Modes Chart.

Q: The picture rolls vertically.

A: Check if the signal cable is securely connected. Re-connect it, if necessary.

(Refer to Connecting a Computer)

Q: The image is not clear; picture is blurred.

A: Run Frequency Coarse and Fine tuning.

A: Turn on again after removing all accessories (video extension cable, etc.)

A: Set the resolution and frequency to the recommended ranges.

Q: The picture image is unstable and shakes.

A: Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display. If not, reset them referring to the current Information under the LCD Display menu and Preset Timing Modes.

Q: Ghost images are shown in the picture.

A: Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display. If not, reset them referring to the current Information under the LCD Display menu and Preset Timing Modes.

Troubleshooting

Q: The image is too light or too dark.

A: Adjusts the brightness and contrast.

(Refer to the Brightness, Contrast)

Q: The screen color is inconsistent.

A: Adjust color using Custom under OSD Color Adjustment menu.

Q: The color image is distorted by dark shadows.

A: Adjust color using Custom under OSD Color Adjustment menu.

Q: The color white is poor.

A: Adjust color using Custom under OSD Color Adjustment menu.

Q: The Power Indicator blinks.

A: The LCD Display is currently saving the changes made in the settings to the OSD memory.

Q: The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.

A: The LCD Display is using its power management system.

Press any key on the keyboard.

Q: The screen is blank and it is blinking.

A: If you see the "TEST GOOD" message on the screen when you pressing the MENU button, check the cable connection between the LCD Display and the computer to ensure that the connector is properly connected.

Problems related to Audio

Note

Problems related to audio signals and their solutions are listed below.

Q: No sound.

A: Ensure that the audio cable is firmly connected to both the audio-in port on your LCD

Display and the audio-out port on your sound card.

(Refer to the Connecting a Computer)

A: Check the volume level.

Q: The sound level is too low.

A: Check the volume level.

A: If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.

Q: The sound is too high or too low.

A: Adjusts the Treble and Bass to the appropriate levels.

Troubleshooting

Problems related to the Remote Control

Note

Problems related to the remote control and their solutions are listed.

Q: The remote control buttons do not respond.

A: Check the polarities (+/-) of the batteries.

A: Check if the batteries are empty.

A: Check if the power is on.

A: Check if the power cord is securely connected.

A: Check if a special fluorescent or neon lamp is on in the vicinity.

Q & A

Q: How can I change the frequency?

A: The frequency can be changed by reconfiguring the video card.

Note

That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

Q: How can I Adjusts the resolution?

A: Windows XP:

Set the resolution in the Control Panel → Appearance and Themes → Display → Settings.

A: Windows ME/2000:

Set the resolution in the Control Panel → Display → Settings.

* Contact the video card manufacturer for details.

Q: How can I set the Power Saving function?

A: Windows XP:

Set the resolution in the Control Panel → Appearance and Themes → Display → Screen

Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer

Manual).

A: Windows ME/2000:

Set the resolution at the Control Panel → Display → Screen Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer

Manual).

Q: How can I clean the outer case/LCD Panel?

A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning solution or plain water.

Troubleshooting

Do not leave any detergent or scratches on the case. Do not let any water enter the

LCD Display.

Q: How can I play the video?

A: The video supports the MPEG1 and WMV codecs only. Install the corresponding codec to play the video. Note that some of the codecs can be incompatible.

Note

Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.

Specifications

General

General

Model Name SyncMaster 460DRn,460DR

LCD Panel

Size

Display area

Pixel Pitch

Synchronization

Horizontal

Vertical

46 " Diagonal (116 cm)

1018.353 mm (H) x 572.544 mm (V)

0.7455 mm (H) x 0.7455 mm (V)

30 ~ 81 kHz

56 ~ 85 Hz

Display Color

16.7 M

Resolution

Optimum resolution 1366 x 768 @ 60 Hz

Maximum resolution 1920 x 1080 @ 60 Hz

Input Signal, Terminated

RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB

0.7 Vp-p ±5 %

Separate H/V sync, Composite, SOG

TTL level (V high≥ 2.0 V, V low ≤ 0.8 V)

Maximum Pixel Clock

165MHz (Analog,Digital)

Power Supply

This product supports 100 - 240 V.

Since the standard voltage may differ from country to country, please check the label on the back of the product.

Signal Cable

15pin-to-15pin D-sub cable, Detachable

DVI-D to DVI-D connector, Detachable

Dimensions (W x H x D) / Weight

1047.4 X 640.6 X 159.3 mm / 41.2 x 25.2 x 6.3 inches / 26.2 kg / 57.8 lbs

Specifications

Environmental considerations

Operating Syn-

Storage cMaste

460DRn

SyncMaste46

0DR

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

Humidity : 10 % ~ 80 %, non-condensing

Temperature : 32°F ~ 104°F (0°C ~ 40°C)

Humidity : 10 % ~ 80 %, non-condensing

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This LCD Display can be installed on any Plug & Play compatible system. The interaction of the LCD Display and the computer systems will provide the best operating conditions and LCD Display settings. In most cases, the LCD Display installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of

RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

For example, the number of TFT-LCD sub pixels contained in this product are

3,147,264.

Note

Design and specifications are subject to change without prior notice.

Class A (Information Communication equipment for industrial use)

Attention dealers and users. This device is registered for EMC requirements for industrial use

(Class A) and can be used in areas other than general households.

(USA Only)

Dispose unwanted electronics through an approved recycler. To

,

PowerSaver

This LCD Display has a built-in power management system called PowerSaver. This system saves energy by switching your LCD Display to low-power mode when it has not been used for a certain amount of time. The LCD Display automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.

Specifications

State

Power Indicator

Power Consumption

460DRn

460DR

Normal Operation

On

460 watts

390 watts

Power saving mode

Blinking

Less than 5 watts

Less than 2 watts

Power off

(switch)

Off

0 watts

0 watts

Note

• The actual power consumption may be different from the indicated power consumption above if the system conditions or settings are changed.

• To stop any power consumption, turn off the switch or disconnect the power cable on the back. Be sure to disconnect the power if you intend to stay away from home for many hours.

• If you connect a network box (sold separately), the LFD will no longer be in compliance with Energy Star 5.0.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows.

Display Mode

IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 848 x 480

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 768

VESA, 1280 x 960

VESA, 1280 x 1024

VESA, 1280 x 1024

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

68.681

37.861

37.500

35.156

37.879

48.077

46.875

31.020

48.363

56.476

60.023

67.500

47.776

60.000

63.981

79.976

Vertical Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

70.086

59.940

70.087

66.667

74.551

75.062

72.809

75.000

56.250

60.317

72.188

75.000

60.000

60.004

70.069

75.029

75.000

59.870

60.000

60.020

75.025

25.175

25.175

28.322

30.240

57.284

100.000

31.500

31.500

36.000

40.000

50.000

49.500

33.750

65.000

75.000

78.750

108.000

79.500

108.000

108.000

135.000

+/+

+/+

+/+

+/+

-/-

-/-

-/-

-/-

+/+

+/-

-/-

-/+

-/-

-/-

-/-

+/+

+/+

-/+

+/+

+/+

+/+

Specifications

Display Mode

VESA, 1360 x 768

VESA, 1360 x 768

VESA, 1600 x 1200

VESA, 1920 x 1080

Horizontal

Frequency

(kHz)

47.712

47.712

75.000

66.587

Vertical Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

60.015

59.790

60.000

59.934

85.500

85.500

162.000

138.500

+/+

+/+

+/+

+/-

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the

Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency.

Unit: kHz

Vertical Frequency

Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit:

Hz

Information

For Better Display

Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT-

LCD.

• Resolution: 1366 x 768

• Vertical frequency (refresh rate): 60 Hz

TFT-LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm (one millionth) and above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without any problems.

• For example, the number of TFT-LCD sub pixels contained in this product are

3,147,264.

When cleaning the monitor and the panel outside, please apply the recommended small amount of cleaner by using a soft cloth to polish. Do not force the

LCD area but rub softly. If excessive force is applied, you may stain it.

If you are not satisfied with the picture quality, you can get better quality of picture by performing the "Auto Adjustment function" in display screen that is appeared as window termination button is pressed. If there's still noise after the automatic adjustment, use the Fine/Coarse adjustment function.

When viewing a fixed screen for an extended period of time, a residual image or blurriness may appear. Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time.

PRODUCT INFORMATION (Image Retention Free)

What is Image Retention ?

Image retention may not occur when a LCD panel is operated under normal conditions.

Normal conditions are defined as continuously changing video patterns. When the

LCD panel is operated for a long time with a fixed pattern (over 12 hours), there may be slight difference in voltage between electrodes that work the liquid crystal

(LC) in a pixel. The voltage difference between electrodes increases with time, forcing the liquid crystal to lean. When this occurs, the previous image may be seen when the pattern is changed. To prevent this, the accumulated voltage difference must be decreased.

Information

Power Off, Screen Saver, or Power Save Mode

• Turn the power off for 4 hours after 20 hours in use

• Turn the power off for 2 hours after 12 hours in use

• Set the Monitor to power off with the PC Display Properties Power Scheme.

• Use a Screen saver if possible - Screen saver in one color or a moving image is recommended.

Change the Color Information periodically

Note

Use Two different colors

Rotate the Color Information with 2 different colors every 30 minutes.

Information

• Avoid using a combination of characters and background color with large difference in luminance.

Avoid using Grey colors, which can cause Image retention easily.

Avoid: Colors with big difference in luminance (Black & White, Grey)

Change the characters color periodically

• Use Bright colors with little difference in luminance.

- Cycle : Change the characters color and background color every 30 minutes

• Every 30 minutes, change the characters with movement.

• All area display Moving image together with Logo periodically.

- Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use.

• The best way to protect your monitor from Image retention is to turn Power off, or set your PC, or System to operate a Screen Saver program when you are not using it. Also Warranty service will be limited based on instruction guide.

Apply the Screen Scroll function on Product

• Apply the Screen Scroll function

- Symptom: Horizontal Bar with Black Color move up and down.

Note

( Please check CD's User Guide at "OSD Function", some model's will not available )

Apply the Screen Pixel function on Product

Information

• Apply the Screen Pixel function

- Symptom: Dot with Black Color move up and down.

• Apply the Screen Bar function

- Symptom: Horizontal / Vertical Bar with Black Color move up and down.

Note

( Please check CD's User Guide at "OSD Function", some model's will not available. )

Apply the Screen Erasing function on Product

• Apply the Screen Erasing function

- Symptom: 2 Vertical blocks move with erasing the display

Note

( Please check CD's User Guide at "OSD Function", some model's will not available )

Appendix

Contact SAMSUNG WORLDWIDE

Note

If you have any questions or comments relating to Samsung products, please contact the

SAMSUNG customer care center.

CANADA

MEXICO

U.S.A

North America

1-800-SAMSUNG (726-7864) http://www.samsung.com

01-800-SAMSUNG

(726-7864) http://www.samsung.com

1-800-SAMSUNG (726-7864) http://www.samsung.com

ARGENTINA

BRAZIL

Latin America

0800-333-3733

0800-124-421 http://www.samsung.com

http://www.samsung.com

CHILE

COLOMBIA

COSTA RICA

DOMINICA

ECUADOR

EL SALVADOR

GUATEMALA

HONDURAS

JAMAICA

NICARAGUA

PANAMA

PERU

PUERTO RICO

TRINIDAD & TO-

BAGO

VENEZUELA

4004-0000

800-SAMSUNG (726-7864) http://www.samsung.com

01-8000112112

0-800-507-7267

1-800-751-2676

1-800-10-7267

800-6225

1-800-299-0013

800-27919267

1-800-234-7267

00-1800-5077267

800-7267

0-800-100-5303 http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

0-800-777-08

1-800-682-3180 http://www.samsung.com

http://www.samsung.com

1-800-SAMSUNG (726-7864) http://www.samsung.com

http://www.samsung.com

ALBANIA

AUSTRIA

BELGIUM

BOSNIA

BULGARIA

Europe

42 27 5755

0810 - SAMSUNG (7267864,

€ 0.07/min)

02-201-24-18

http://www.samsung.com

http://www.samsung.com/be

(Dutch)

05 133 1999

07001 33 11 http://www.samsung.com/ be_fr (French)

http://www.samsung.com

Appendix

CROATIA

CZECH

Europe

062 SAMSUNG (062 726 http://www.samsung.com

7864)

800 - SAMSUNG http://www.samsung.com

(800-726786)

DENMARK

FINLAND

FRANCE

GERMANY

GREECE

HUNGARY

ITALIA

KOSOVO

70 70 19 70

030 - 6227 515 http://www.samsung.com

http://www.samsung.com

01 48 63 00 00 http://www.samsung.com

01805 - SAMSUNG http://www.samsung.com

(726-7864, € 0,14/Min)

2106293100 http://www.samsung.com

06-80-SAMSUNG (726-7864) http://www.samsung.com

800-SAMSUNG (726-7864) http://www.samsung.com

+381 0113216899 -

LUXEMBURG

MACEDONIA

NORWAY

POLAND

261 03 710

023 207 777

MONTENEGRO 020 405 888

NETHERLANDS 0900-SAMSUNG

(0900-7267864) ( € 0,10/Min)

-

http://www.samsung.com

http://www.samsung.com

815-56 480 http://www.samsung.com

0 801 1SAMSUNG (172678) http://www.samsung.com

PORTUGAL

RUMANIA

022-607-93-33

80820 - SAMSUNG http://www.samsung.com

(7267864) http://www.samsung.com

SERBIA

SLOVAKIA

0700 SAMSUNG (0700 726 http://www.samsung.com

7864)

0800 - SAMSUNG (0800-726 http://www.samsung.com/sk

786)

SPAIN

SWEDEN

902 - 1 - SAMSUNG (902 172 http://www.samsung.com

678)

0771 726 7864 (SAMSUNG) http://www.samsung.com

SWITZERLAND 0848 - SAMSUNG (7267864, http://www.samsung.com/ch

CHF 0.08/min) http://www.samsung.com/ ch_fr/(French)

U.K

EIRE

LITHUANIA

LATVIA

ESTONIA

TURKEY

0330 SAMSUNG (7267864) http://www.samsung.com

0818 717100

8-800-77777

8000-7267

800-7267

444 77 11 http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

Appendix

RUSSIA

GEORGIA

ARMENIA

AZERBAIJAN

KAZAKHSTAN

UZBEKISTAN

KYRGYZSTAN

TADJIKISTAN

UKRAINE

BELARUS

MOLDOVA

CIS

8-800-555-55-55

8-800-555-555

0-800-05-555

088-55-55-555

8-10-800-500-55-500 (GSM:

7799)

8-10-800-500-55-500

00-800-500-55-500

8-10-800-500-55-500

0-800-502-000

-

-

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com/ua

810-800-500-55-500

00-800-500-55-500 -

http://www.samsung.com/ ua_ru

Asia Pacific

AUSTRALIA 1300 362 603

NEW ZEALAND 0800 SAMSUNG (0800 726

786)

CHINA

HONG KONG

400-810-5858

(852) 3698 - 4698 http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com/hk

INDIA http://www.samsung.com/ hk_en/ http://www.samsung.com

INDONESIA

3030 8282

1800 3000 8282

0800-112-8888 http://www.samsung.com

JAPAN

MALAYSIA

PHILIPPINES

SINGAPORE

THAILAND

TAIWAN

VIETNAM

021-5699-7777

0120-327-527

1800-88-9999

1-800-10-SAMSUNG

(726-7864)

1-800-3-SAMSUNG

(726-7864)

1-800-8-SAMSUNG

(726-7864) http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

02-5805777

1800-SAMSUNG (726-7864) http://www.samsung.com

1800-29-3232 http://www.samsung.com

02-689-3232

0800-329-999

1 800 588 889 http://www.samsung.com

http://www.samsung.com

Appendix

IRAN

OMAN

KUWAIT

BAHRAIN

EGYPT

JORDAN

MOROCCO

SAUDI ARABIA

U.A.E

021-8255

800-SAMSUNG (726-7864) http://www.samsung.com

183-2255

8000-4726

080 100 2255

9200-21230

Middle East

08000-726786

800-22273 http://www.samsung.com

http://www.samservice.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

http://www.samsung.com

800-SAMSUNG (726-7864) http://www.samsung.com

Africa

NIGERIA 0800-SAMSUNG (726-7864) http://www.samsung.com

SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com

Terms

Dot Pitch

Vertical Frequency

Horizontal Frequency

Interlace and Non-Interlace

Methods

Plug & Play

Resolution

The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot

Pitch'. Unit: mm

The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical

Frequency or Refresh Rate. Unit: Hz

Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.

The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal

Cycle. The inverse number of the Horizontal Cycle is called

Horizontal Frequency. Unit: kHz

Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs.

This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function.

The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. This number shows the accuracy of the display. A high resolution is good for performing multiple tasks as more image information can be shown on the screen.

Appendix

SRS TS XT

Example: If the resolution is 1360 x 768, this means the screen is composed of 1360 horizontal dots (horizontal resolution) and 768 vertical lines (vertical resolution).

This feature outputs sonorous and vivid 3D sound as for 5.1

channel speaker sound but through a 2-channel speaker. It has a good effect when stereo signals are input.

Correct Disposal

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

Note

The rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider.

Authority

Information in this document is subject to change without notice.

© 2009 Samsung Electronics Co., Ltd. All rights reserved.

Appendix

Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are registered trademarks of Video Electronics Standard Association;. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

TruSurround XT, SRS and the symbol are trademarks of SRS

Labs, Inc.

TruSurround XT technology is incorporated under licese form SRS

Labs, Inc.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Digital signage flat panel Black
  • 116.8 cm (46") 1366 x 768 pixels 1500 cd/m²
  • 8 ms

Related manuals

Download PDF

advertisement

Table of contents