Samsung LW20M21CP User manual
Samsung LW20M21CP is a premium LCD TV that offers a wide range of features to enhance your viewing experience. With its stunning picture quality, immersive sound, and versatile connectivity options, this TV is perfect for both home entertainment and professional use.
Advertisement
Advertisement
858Q_cover.qxd 5/17/05 1:50 PM Page 1
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
ELECTRONICS
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
BN68-00858Q-00
LCD TV
LW15M23C
LW17M24C
LW17M24CU
LW20M21C
LW20M22C
Owner’s Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
TELETEXT
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
Eng.qxd 5/17/05 9:08 AM Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Digital Ready TV: When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the
Set-Top Box output is 480p).
• Digital Ready TV: When you select the wide screen (16:9) mode to watch an SD-grade digital broadcast (and the
Set-Top Box output is 1080i).
Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped.
Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
• Digital Ready TV: When the
TV receives HD-grade signals
(and the Set-Top Box output is 1080i).
When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen size
"16:9" or "Panorama" selected, you will be able to watch the program but the top and bottom edges of the screen will be cropped.
Note : If the borders at the top, bottom and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
Eng.qxd 5/17/05 9:08 AM Page 2
• Integrated Digital TV
•
(Wide-screen): When the TV receives SD-grade (regular) broadcasting signals (receives
480p regular signals).
• Digital Ready TV (wide-screen): digital TV: When the TV receives
SD-grade (regular) broadcasting signals (with a Set-Top Box).
When you watch an analog
(regular) broadcast on a wide-screen TV (with the 4:3 screen mode selected).
• When you watch a DVD, CD or a video in wide-screen (21:9) format on a wide-screen (16:9) TV.
• When you connect a computer or a game console to the TV and select the 4:3 screen mode.
Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped.
Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
If you connect a DVD player, computer or a game console to the wide-screen TV and watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left and right side edges, or the top and bottom edges of the screen will be cropped.
Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 2
Contents
■
■
■
■
■
■
■
■
■
■
■
◆ C
ONNECTING AND
P
REPARING
Y
OUR
TV
■ Viewing the Control Panel .............................................................................
■ Viewing the Connection Panel ......................................................................
- Connecting an Aerial or Cable Television Network....................................
- Connecting a Set-Top Box, VCR or DVD ..................................................
- Connecting a Computer .............................................................................
- Connecting External A/V Devices ..............................................................
- Connecting Headphones ...........................................................................
- Kensington Slot..........................................................................................
Viewing Pictures From External Sources......................................................
Inserting the Batteries in the Remote Control ...............................................
Viewing the Remote Control (All Functions Except Teletext)........................
Viewing the Remote Control (Teletext Functions) .........................................
Switching On and Off ....................................................................................
Placing in Standby Mode ..............................................................................
Becoming Familiar with the Remote Control.................................................
Plug & Play....................................................................................................
Selecting TV Mode or an Input Source .........................................................
Editing an Input Source Name ......................................................................
Choosing Your Language ..............................................................................
◆ S
ETTING THE
C
HANNELS
■ Storing Channels Automatically.....................................................................
■
■
■
■
Storing Channels Manually ...........................................................................
Editing the Channels .....................................................................................
Sorting the Stored Channels .........................................................................
Giving Channels Names................................................................................
◆ S
ETTING THE
P
ICTURE
■ Changing the Picture Standard .....................................................................
■
■
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
19
20
22
23
24
11
12
12
13
9
10
7
8
14
16
17
18
7
7
6
6
4
5
6
25
26
27
◆ S
ETTING THE
S
OUND
■ Changing the Sound Standard......................................................................
■ Selecting Auto Volume Control......................................................................
28
29
English-2
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 3
Contents
◆ S
ETTING THE
T
IME
■ Setting the Clock ...........................................................................................
■
■
Switching Off Automatically ...........................................................................
Switching the Television On and Off Automatically .......................................
◆ U
SING THE
V
ARIOUS
F
UNCTIONS
■ Setting the Blue Screen Mode ......................................................................
■ Displaying Information...................................................................................
◆ U
SING THE
T
ELETEXT
F
EATURE
■ Teletext Feature.............................................................................................
■
■
■
■
Displaying the Teletext Information ...............................................................
Selecting a Page by Number ........................................................................
Using FLOF to Select a Page .......................................................................
Storing Teletext Pages ..................................................................................
◆ U
SING THE
PC F
UNCTIONS
■ Setting Up Your PC Software ........................................................................
■
■
■
■
■
■
■
■
Coarse and Fine Tuning of the Image...........................................................
Changing the Image Position ........................................................................
Initializing the Image Settings .......................................................................
Adjusting the PC Screen Automatically.........................................................
Picture Mode .................................................................................................
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
Customizing the Colour .................................................................................
R
ECOMMENDATIONS
F
OR
U
SE
■ Troubleshooting: Before Contacting Service Personnel ...............................
■
■
■
■
■
■
■
■
■
Power Saver..................................................................................................
Technical and Environmental Specifications .................................................
Display Modes...............................................................................................
Retractable Stand..........................................................................................
Using Your TV in Another Country ................................................................
Using the Anti-Theft Kensington Lock ...........................................................
Installing VESA compliant mounting devices ................................................
Installing the Wall Mount Kit (LW15M23C/LW17M24C/LW17M24CU) .................
Installing the Wall Mount Kit (LW20M21C/LW20M22C) ....................................
30
31
32
33
33
34
35
36
37
37
38
39
40
41
42
43
43
44
45
50
50
51
51
46
47
48
49
52
54
Symbols
Press Important Note
English-3
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 4
Viewing the Control Panel
SOURCE
Displays a menu of all of the available input sources
(TV - AV1 - AV2 - S-Video - PC).
You can also use the SOURCE( ) button on the TV’s control panel to make selections.
MENU
Press to see an on-screen menu of your TV’s features.
- +
Moves the selector left or right on the OSD.
Decreases or increases the level of audio volume and the values of the selected function.
Moves the selector down or up on the OSD.
Decreases or increases the channel number.
POWER
Turns ON/OFF your set.
HEADPHONE
SPEAKERS
REMOTE CONTROL SENSOR
Aims the remote control towards this spot on the TV.
POWER INDICATOR
Lights up when you turn the power off.
(Red light shows in stand-by mode, Red shows when you turn the power on, and light is off after the power is on. Green shows when you set
Timer on or off.)
English-4
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 5
Viewing the Connection Panel
Power Input
< LW17M24C / LW17M24CU > < LW15M23C / LW20M21C / LW20M22C >
Power Input
Option
SCART
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
English-5
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 6
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting a Set-Top Box, VCR or DVD
- Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the
Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Connecting a Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to the “PC AUDIO IN (STEREO)” jack ( other end to the “Audio Out” jack of the sound card on your computer.
)on the rear of your set and the
➣
15 Pin D-SUB connector
Pin
8
9
10
11
12
13
14
15
3
4
5
1
2
6
7
Separate H/V
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal Sync.
Vertical Sync.
DDC - SCL (Clock)
Composite H/V
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal/Vertical Sync.
Not used
DDC - SCL (Clock)
English-6
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 7
Viewing the Connection Panel
Connecting External A/V Devices
- Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD or Camcorder.
- Connect RCA audio cables to “(MONO)L-AUDIO-R” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.
Connecting Headphones
- Plug a set of headphones into the 3.5mm mini-jack socket on the right-side of the set.
While the headphones are connected, the sound from the built-in speakers will be disabled.
Kensington Slot
- This television has been designed to apply a burglarproof lock.(See page 51)
English-7
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 8
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input.
1
2
Check that all the necessary connections have been made
(refer to pages 6 and 7 for further details).
Press the TV button to choose TV mode.
Press the SOURCE button to choose Video mode.
The input sources are displayed in the following order:
AV1 - AV2 - S-Video - PC.
English-8
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 9
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
Purchase your set
Find that the remote control is no longer operating correctly
1
2
3
Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it.
Install two AAA size batteries.
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
Replace the cover by aligning it with the base of the remote control and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
English-9
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 10
Viewing the Remote Control
(All Functions Except Teletext)
Television On/Off
Numeric buttons for direct channel access
One/Two-digit channel selection
Temporary sound switch-off
Volume up or down
Select to the TV mode directly
Menu display and change confirmation
Sound mode selection
Previous channel
-Next channel
-Previous channel
Available source selection
Use to see information on the current broadcast.
Exit the OSD
Control the cursor in the menu
Automatic switch-off
Sound effect selection
Picture effect selection
English-10
The performance of the remote control may be affected by bright light.
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 11
Viewing the Remote Control
(Teletext Functions)
Teletext hold
Exit from the teletext display
Teletext index
Teletext sub page
Teletext display/mix both teletext information and the normal broadcast
Fastext topic selection
P : Teletext next page
P : Teletext previous page
Teletext mode selection
(LIST/FLOF)
Teletext reveal
Teletext store
Teletext size selection
English-11
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 12
Switching On and Off
The mains lead is attached to the rear of your set.
1
2
3
Plug the mains lead into an appropriate socket.
Result: When the power cord is plugged in, the LED turns red.
Press the POWER button to switch on.
To switch off, press the POWER button again.
Placing in Standby Mode
Your set can be placed in Standby mode in order to reduce the power consumption.
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1
2
Press the POWER button.
To switch back on, simply press the POWER button again, a numeric button, or channel or button.
Do not leave your set in Standby mode for long periods of time (when you are away on holiday, for example).
Turn off by pressing the POWER button.
It is best to unplug the set from the mains and aerial.
English-12
01-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume
Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and their functions.
Button
PRE-CH
-
9
-/--
MUTE
MENU
EXIT
Viewing Function Menu Function
Used to display the next stored channel.
Used to display the previous stored channel.
-
-
Used to switch repeatedly between the last two channels displayed. (PRE-CH; Previous Channel)
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to increase the volume.
Used to decrease the volume.
-
-
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or press the + or - button.
Used to display the on-screen menu system.
Used to return to the previous menu or normal viewing.
Used to exit the menu system and return directly to normal viewing.
Used to move among the menu items.
Used to select a menu item or increase the value of the selected item.
Used to return to the previous menu item or decrease the value of the selected item.
English-13
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 14
Plug & Play
When the set is initially powered ON, you are automatically presented with a series of basic customer settings.
The following settings are available.
1
2
3
4
5
6
7
8
9
If the set is in standby mode, press the POWER button on the remote control.
Result: The message Plug & Play is displayed.
It appears for a little while, and then the Language menu is automatically displayed.
Select the appropriate Language by pressing the or button.
The available languages are listed.
You can choose one of 12 languages.
Press the ENTER button to confirm your choice.
Result: The message “Check antenna input.” is displayed with
OK selected.
Press the ENTER button.
Result: The country menu is displayed:
Belgium - Germany - Spain - France - Italy -
Netherlands - Switzerland - Sweden - United
Kingdom - Eastern Europe - Others
Select your Country by pressing the or button.
Press the ENTER button.
Result: The Auto Store menu is displayed.
Press the ENTER button.
Result: The channel search will start and end automatically.
To stop the search before it has finished, press the
ENTER button with Stop selected.
Press the ENTER button.
Select the Hour or Minute by pressing the or button.
Set the Hour or Minute by pressing the or button.
(Refer to “Setting the Clock” on page 30)
Press the MENU button to confirm your setting.
Result: The message “Enjoy your viewing” is displayed, and then the channel which has been stored will be activated.
Press the EXIT button to exit.
English-14
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 15
Plug & Play
If you want to reset this feature...
1
2
3
4
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select the Plug & Play.
Press the ENTER button.
Result: The message Plug & Play is displayed.
For further details on how to set up this feature, refer to the previous page.
English-15
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 16
Selecting TV Mode or an Input Source
You can choose TV mode or change to an input source connected to the TV set. Use this button to choose an input source that you would like to watch.
1
2
3
4
Press the MENU button.
Result: The main menu is displayed.
Press the ENTER button to select the Input.
Result: The options available in the Input group are displayed.
Press the ENTER button.
Result: The Source List is selected.
Press the or button to move to the input source that you wish to choose.
Press the ENTER button.
Result: The input source changes to the one you have chosen.
English-16
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 17
Editing an Input Source Name
Entering the names of the input source devices connected to the input ports on the TV set allows you to find and choose an input source that you would like to watch in a quick and convenient manner.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the ENTER button to select the Input.
Result: The options available in the Input group are displayed.
Press the or button to select the Edit Name.
Press the ENTER button.
Press the or button to move to the input source that you wish to edit.
Press the ENTER button.
Result: The following options are available
Select the required device by pressing the or repeatedly.
Result: The following options are available:
---- - VCR - DVD - Cable STB - HD STB - Satellite STB
- AV Receiver - DVD Receiver - Game - Camcorder -
DVD Combo - DHR - PC.
When you are satisfied with your choice, press the EXIT button to return to normal viewing.
English-17
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 18
Choosing Your Language
When you start using your set for the first time, you must select the language which will be used for displaying menus and indicators.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select the Language.
Press the ENTER button.
Select a particular Language by pressing the or button repeatedly.
When you are satisfied with your choice, press the EXIT button to return to normal viewing.
English-18
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 19
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any channels you do not wish to watch.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select Auto Store.
Press the ENTER button.
Result: The Start is selected.
Press the ENTER button to search the channels.
The sub menu is changed from Start to Stop with channel search started.
Result: The search will end automatically.
Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed.
To stop the search before it has finished, press the ENTER button to search the channels.
When the channels have been stored, you can:
Add or delete the channels (refer to page 22)
Sort them in the order required (refer to page 23)
Assign a name to the stored channels (refer to page 24)
Press the EXIT button to exit.
3
40
English-19
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 20
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found
The programme number of each stored channel which you wish to identify
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select the Manual Store.
Press the ENTER button.
Result: The options available in the Manual Store group are displayed with the Prog. selected.
Press the or button to select Colour System.
Press the ENTER button.
Select the Colour System required by pressing the or button repeatedly and then press the ENTER button.
Result: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC4.43
Press the or button to select Sound System.
Press the ENTER button.
Select the Sound System required by pressing the or button repeatedly and then press the ENTER button.
Result: The sound standards are displayed in the following order:
BG - DK - I - L
For all the channels to move to the required channel numbers, repeat steps 5 to 6 after selecting Prog. by pressing the or button.
English-20
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 21
Storing Channels Manually
8
9
If you know the channel number to be stored,
Press the or button to select the Channel.
Press the ENTER button.
Select C (Air channel) or S (Cable channel) by pressing the or button and then press the ENTER button.
Select the required number by pressing the or button and then press the ENTER button.
If there is abnormal sound or no sound, re-select the sound system required.
You can also set a channel by pressing number buttons on the remote control.
If you do not know the channel numbers, press the or button to select Search.
Press the ENTER button.
Start the Search by pressing the or button.
Press the ENTER button.
Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen.
10 Press the or button to select Store.
Press the ENTER button.
The OK is selected.
Result: The channel and associated programme number are stored.
11 Repeat Steps 8 to 10 for each channel to be stored.
12 Press the EXIT button to exit.
English-21
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 22
P
P
Editing the Channels
You can exclude any channels of your choice from the channels you have scanned. When you scan through the stored channels, those you have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed during scanning.
3
4
1
2
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select Add/Delete.
Press the ENTER button.
Result: The state of the current channel is displayed.
Press the or button to select the channel that you wish to
Add or Delete.
Result: If the channel that you wish to edit is not in memory,
Add is selected and displayed.
Otherwise, if the channel that you wish to edit is in memory,
Delete is selected and displayed.
6
7
Press the ENTER button to Add or Delete the channel.
Repeat Step 5 for each channel to be added or erased.
8 Press the EXIT button to exit.
English-22
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 23
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
Assign easily remembered numbers to the channels that you watch most often.
3
4
1
2
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select Sort.
Press the ENTER button.
Result: The current Prog., Channel and Name are displayed.
Select the channel number that you wish to change by pressing
Press the ENTER button.
Result: The selected Channel and Name are moved to the right side.
6 Press the or button to move to the position which you would like to change and then press the ENTER button.
Result: The selected channel is exchanged with the one previously stored to the chosen number.
7 Repeat step 5 to 6 for another channel to sort again.
8 Press the EXIT button to exit.
Channel
Channel
English-23
02-BN68-00858Q-00Eng.qxd 5/17/05 1:50 PM Page 24
Giving Channels Names
If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required.
1
2
3
4
5
6
7
8
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select the Name.
Press the ENTER button.
Result: The current Prog., Channel and Name are displayed.
If necessary, select the channel to be assigned to a new Name by pressing the or button.
Press the ENTER button.
Result: The selection bar is displayed around the name box.
To...
Select a letter, number or symbol
Move on to the next letter
Move back to the previous letter
Confirm the name
Then...
Press the
Press the
Press the or button button
Press the ENTER button button
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters (space, _ )
Repeat Steps 5 to 6 for each channel to be assigned to a new name.
When you have finished entering the name, press the ENTER button to confirm the name.
English-24
02-BN68-00858Q-00Eng.qxd 5/17/05 9:05 AM Page 25
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1
2
3
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Result: The Mode is selected.
4
5
Press the ENTER button.
Select the required picture effect by pressing the or button repeatedly.
Press the ENTER button.
Result: The following picture effects are available:
Dynamic - Standard - Movie - Custom
6 Press the EXIT button to exit.
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
English-25
02-BN68-00858Q-00Eng.qxd 5/17/05 9:05 AM Page 26
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Custom.
Press the ENTER button.
Select the option (Contrast, Brightness, Sharpness, Colour or Tint-NTSC only) to be adjusted by pressing the or button.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to reach the required setting.
When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
If you make any changes to these settings, the picture standard is automatically switched to Custom.
English-26
02-BN68-00858Q-00Eng.qxd 5/17/05 9:05 AM Page 27
Adjusting the Screen Background Colour
You can change the screen background colour according to your preference.
1
2
3
4
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Colour Tone.
Press the ENTER button.
Result: The following options are available:
Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2
When you are satisfied with your choice, press the EXIT button to return to normal viewing.
English-27
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 28
Changing the Sound Standard
You can select the type of special sound effect to be used when watching a given broadcast.
1
2
3
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Sound.
Result: The options available in the Sound group are displayed.
Press the ENTER button.
Result: The Mode is selected.
4
5
Press the ENTER button.
Select the required sound effect by pressing the or button repeatedly.
Press the ENTER button.
Result: The following sound effects are available:
Standard - Speech
6 Press the EXIT button to exit.
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
English-28
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 29
Selecting Auto Volume Control
Reduces the differences in volume level between broadcasters.
3
4
1
2
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Sound.
Result: The options available in the Sound group are displayed.
Press the ENTER button.
Press the or button to select Auto Volume.
Press the ENTER button.
5 Press the or button to select Off/On.
Press the ENTER button.
6 Press the EXIT button to exit.
English-29
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 30
Setting the Clock
3
4
1
2
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the ENTER button.
Result: The Clock is selected.
5
6
Press the ENTER button.
Press the or button to set the Hour.
Press the or button to move to Minute.
Press the or button to set the minutes.
7 Press the ENTER button.
Result: The clock is set.
8 Press the EXIT button to exit.
You can also set the time using the numeric buttons on the remote.
English-30
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 31
Switching Off Automatically
You can select a time period of between Off and 180 minutes after which your set automatically switches off.
1
2
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
3
4
5
Press the ENTER button.
Press the ENTER button.
Result: The preset Clock is selected.
Press the or button to select the Sleep Timer.
Press the ENTER button.
6 Select the number of minutes after which your set switches On by pressing the or button repeatedly.
Result: The preset time intervals:
Off, 30, 60, 90, 120, 150, 180 minutes.
7 Press the EXIT button to exit.
You can also select this feature by simply pressing the “SLEEP” button.
If the sleep timer is already set, the screen displays the remaining time and then your set will be switched Off.
If the sleep timer is not yet set, Off is displayed.
Off • 30 • 60 • 90 • 120 • 150 • 180
English-31
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 32
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at the time you select.
Switch off automatically at the time you select.
1
2
3
4
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the ENTER button.
Result: The Time menu are displayed with Clock selected.
Press the or button to select the On Timer.
Press the ENTER button.
Result: The On Timer menu is displayed.
To...
Press the...
Move to Hour, Minute, Channel and Volume or button
6
Volume level
Move to Setup
Select On to enable above setting or button or button
Press the MENU button to return to the previous menu and to set Off Timer continuously.
Press the or button to select Off Timer.
In the same way, set the time at which you wish the set to be switched off automatically.
7 Press the EXIT button to exit.
You can also set hour and minute by pressing the number buttons on the remote control.
English-32
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 33
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select Blue Screen.
Press the ENTER button.
Select the required option (On or Off) by pressing the or button.
Press the EXIT button to return to normal viewing.
Displaying Information
You can view the setting status of the selected source by pressing the
“INFO” button on the remote control.
The information displayed varies according to the selected source.
English-33
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 34
Teletext Feature
Most television channels provide written information services via teletext.
Information provided includes:
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
C
D
A
B
E
F
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indicators.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages displayed in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
English-34
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 35
Displaying the Teletext Information
You can display Teletext information at any time on your set.
☛
For Teletext information to be displayed correctly, channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
2
3
Select the channel providing the Teletext service using the or button.
Press the TTX/MIX button to activate the teletext mode.
Result: The contents page is displayed. It can be redisplayed at any time by pressing the (index) button.
If you wish to display the actual broadcast at the same time as the teletext page, press the TTX/MIX button again.
4 Press the TV( ) button again to exit the teletext display.
English-35
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 36
Selecting a Page by Number
You can enter the page number directly by pressing the numeric buttons on the remote control.
1
2
Enter the three-digit page number given in the content by pressing the corresponding numeric buttons.
Result: The current page counter is incremented and the page is then displayed.
If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.
To freeze the display on a given page, press the (hold) button.
Press the (hold) button again to resume.
Using the various display options:
To display...
◆ Hidden text
(answers to quiz games, for example)
◆ The normal screen
◆ A secondary page, by entering its 4-digit number
◆ The next page
◆ The previous page
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
◆ Normal screen
Press the...
(reveal)
(reveal) again
(subpage)
(page up)
(page down)
(size)
• Once
• Twice
• Three times
English-36
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 37
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control.
1
2
3
4
Display the teletext contents page by pressing the TTX/MIX button.
Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status line.
Result: The page is displayed with other coloured information that can be selected in the same way.
To display the previous or next page, press the corresponding coloured button.
To display the subpage, see the following steps.
◆ Press the (subpage) button.
Result: The available subpages appear.
◆ Select the required subpage.
Subpages can be scrolled by using the or button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1
2
3
4
5
Select the LIST mode using the (LIST/FLOF) button.
Result: Four 3-digit numbers are displayed in different colours.
The (LIST/FLOF) button is used to switch between the LIST and FLOF modes.
Press the coloured button corresponding to the page that will be replaced.
Enter the new page number using the numeric buttons.
Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time.
Press the (store) button until the corresponding blocks blink.
English-37
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 38
Setting Up Your PC Software
(Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1 First, click on “Control Panel” on the Windows start menu.
2 When the control panel window appears, click on “Appearance and
Themes” and a display dialog-box will appear.
3 When the control panel window appears, click on “Display” and a display dialog-box will appear.
4 Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
- refer to page 47, 49
If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
English-38
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 39
Coarse and Fine Tuning of the Image
Preset to PC mode by pressing the SOURCE button on the remote contol .
1
2
3
4
5
6
7
8
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the ENTER button.
Result: The Image Lock menu is selected.
Press the or button to select Coarse or Fine.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to adjust the screen quality.
Vertical stripes may appear or the picture may become blurry.
When you are satisfied with the settings, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-39
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 40
Changing the Image Position
Preset to PC mode by pressing the SOURCE button on the remote contol .
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the or button to select Position.
Press the ENTER button.
Result: You can adjust the image Position.
Press the or button to adjust the vertical position.
Press the or button to adjust the horizontal position.
Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-40
03-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 41
Initializing the Image Settings
Preset to PC mode by pressing the SOURCE button on the remote contol .
You can replace all image settings with the factory default values.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the or button to select Image Reset.
Press the ENTER button.
Result: The message “Image Reset has completed.” is displayed.
Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-41
04-BN68-00858Q-00Eng.qxd 5/17/05 9:06 AM Page 42
Adjusting the PC Screen Automatically
Preset to PC mode by pressing the SOURCE button on the remote contol .
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the or button to select Auto adjustment.
Press the ENTER button.
Result: The screen quality and position are automatically adjusted, and the screen returns to the original view a few seconds later.
Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-42
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 43
Picture Mode
You can select the type of picture which best corresponds to your viewing requirements.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Result: The Mode is selected.
Press the ENTER button.
Select the required picture effect by pressing the or button repeatedly. Press the ENTER button.
Result: The following picture effects are available:
Entertain - Internet - Text - Custom
Press the EXIT button to exit.
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Custom.
Press the ENTER button.
Select the option (Contrast, Brightness) to be adjusted by pressing the or button.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to reach the required setting.
When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
If you make any changes to these settings, the picture standard is automatically switched to Custom.
English-43
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 44
Adjusting the Screen Background Colour
You can change the screen background colour according to your preference.
1
2
3
4
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Colour Tone.
Press the ENTER button.
Result: The following options are available:
Cool - Normal - Warm - Custom
When you are satisfied with your choice, press the EXIT button to return to normal viewing.
English-44
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 45
Customizing the Colour
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Colour Control.
Press the ENTER button.
Select the option (Red, Green, Blue) to be adjusted by pressing the or button.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to reach the required setting.
When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-45
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 46
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer.
No sound or picture.
Normal picture but no sound.
No picture or black and white picture.
Sound and picture interference.
Blurred or snowy picture, distorted sound.
Remote control malfunctions.
“Check signal cable” message is displayed.
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE remote control.
button has been pressed on the
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the set and move it further away.
◆ Plug your set into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
◆ Check that the signal cable is firmly connected to the PC.
◆ Check that the PC is turned on.
In PC mode, “ Mode Not Supported” message is displayed.
◆ Check the maximum resolution and the frequency of the video adapter.
◆ Compare these values with the data in the Display Modes.
(refer to page 49)
◆ Adjust the Coarse or Fine function. (refer to page 39) In PC mode, horizontal or vertical bars appear to flicker, jitter or shimmer on the image.
In PC mode, the screen is black and the power indicator light is steady amber or blinks every 0.5 or 1 seconds.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press any key on the keyboard.
English-46
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 47
Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and may appear to vibrate.
◆ Check that the display resolution and frequency from your computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
◆ If the setting is not correct, use your computer utility programme to change the display settings.
Your set supports multiscan display functions within the following frequency domain:
Horizontal frequency(kHz)
Vertical frequency(Hz)
Maximum refresh rate
(at 75Hz)
15 ”(LW15M23C)
17 ”(LW17M24C)/
17 ”(LW17M24CU)
20 ”(LW20M21C) 20 ”(LW20M22C)
30~69 30~80 28~33 28~47
50~75
1024X768
50~75
1280X1024
50~70
640X480
50~75
800X600
In PC mode, the image is not centred on the screen.
◆ Adjust the horizontal and vertical position.
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one millionth) above is used for this product. This is not from bad quality and you can use it without uneasiness.
For example, the number of TFT LCD sub pixels: LW15M23C - 2,359,296, LW17M24C/LW17M24CU - 3,932,160,
LW20M21C - 921,600, LW20M22C - 1,440,000
Power Saver
This set has a built-in power management system called PowerSaver. This system saves energy by switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA
DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.
State
Horizontal Sync
Vertical Sync
Power Indicator
Power Consumption
Normal Operation
Active
Active
Off
15” 40W, 17” 45W, 20” 55W
Power-Saving Function mode
(EPA/NUTEK)
Inactive
Inactive
Red, Blinking (1 sec interval)
Less than 3W
➣
This set automatically returns to normal operation when horizontal and vertical sync are restored.
This occurs when you move the computer’s mouse or press any key on the keyboard.
English-47
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 48
Technical and Environmental Specifications
Model Name
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
Frequency
Horizontal
Vertical
Display Color
Resolution
Optimum
Maximum
Input Signal
Sync.
Video Signal
Video
Color System
Video System
Power Supply
Input
Power Consumption
Maximum
Power Saving
Dimension (W x D x H)
TV Body
With stand
LW15M23C LW17M24C/LW17M24CU LW20M21C
H/V Separate, TTL, P or N
0.7 Vp-p @75 Ω
PAL / NTSC / SECAM
CVBS, S-VHS, RGB
RCA Jack (L, R), 0.5Vrms(-9dB)
3.5
ø Stereo Jack, 0.5Vrms(-9dB)
2.5W x 2
Max.10mW Output(3,5 ø Stereo Jack 32)
RF : 80Hz ~15kHz at -3dB
A/V : 80Hz ~20kHz at -3dB
LW20M22C
331.6(H) x 254.9(V)mm
13.05(H) x 10.03(V)inch
304.1(H) x 228.1(V)mm
11.97(H) x 8.98(V)inch a-si TFT active matrix
0.297(H) x 0.297(V)mm
140/115
383.5(H) x 298.0(V)mm
15.09(H) x 11.73(V)inch
337.9(H) x 270.3(V)mm
13.30(H) x 10.64(V)inch a-si TFT active matrix
0.264(H) x 0.264(V)mm
140/120
413.0(H) x 311.0(V)mm
16.25(H) x 12.24(V)inch
408.0(H) x 306.0(V)mm
16.06(H) x 12.05(V)inch a-si TFT active matrix
0.6375(H) x 0.6375(V)mm
160/150
413.0(H) x 311.0(V)mm
16.25(H) x 12.24(V)inch
408.0(H) x 306.0(V)mm
16.06(H) x 12.05(V)inch a-si TFT active matrix
0.51(H) x 0.51(V)mm
160/120
30 ~ 69kHz
50 ~ 75Hz
16.2 Million
1024 x 768@60Hz
1024 x 768@75Hz
30 ~ 80 kHz
50 ~ 75Hz
16.2 Million
1280 x 1024@60Hz
1280 x 1024@75Hz
28 ~ 33kHz
50 ~ 70Hz
16.7 Million
640 x 480@60Hz
640 x 480@70Hz
AC 100V ~ 240V (50 / 60Hz)
28 ~ 47kHz
50 ~ 75Hz
16.7 Million
800 x 600@60Hz
800 x 600@75Hz
Weight
With stand
Environmental Considerations
Operationg Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input
PC Audio Input
Audio Output
Headphone Output
Frequency
Response
40W
<3W
45W
<3W
55W
<3W
55W
<3W
360.2 x 64.2 x 338.6 mm
(14.18 x 2.53 x 13.33 inch)
360.2 x 192.9 x 396.5 mm
(14.18 x 7.59 x 15.61 inch)
416.7x 71.8 x 392.9 mm
(16.40 x 2.82 x 15.46 inch)
416.7 x 192.9 x 423.8 mm
(16.40 x 7.59 x 16.68 inch)
479.0 x 74.7 x 436.4 mm
(18.86 x 2.94 x 17.18 inch)
479.0 x 226.0 x 463.0 mm
(18.86 x 8.90 x 18.23 inch)
479.0 x 74.7 x 436.4 mm
(18.86 x 2.94 x 17.18 inch)
479.0 x 226.0 x 463.0 mm
(18.86 x 8.90 x 18.23 inch)
3.6 kg (7.94 lbs) 7.45 kg (16.42 lbs) 4.95 kg (10.91 lbs) 7.15 kg (15.76 lbs)
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
English-48
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 49
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your Videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture.
Mode(PC) Resolution
Horizontal
Frequency
(kHz)
720X400 31.469
Vertical
Frequency
(Hz)
70.087
Pixel
Clock
Frequency
(MHz)
28.322
VGA
LW15M23C
17M24C
17M24CU
20M21C
20M22C
LW15M23C
17M24C
17M24CU
20M22C
640X480
640X480
SVGA
LW15M23C, 17M24C, 20M22C
800X600
800X600
1024X768
XGA
LW15M23C, 17M24C,17M24CU 1024X768
31.469
37.500
46.875
37.879
48.363
60.023
59.940
75.000
75.000
60.317
60.004
75.029
25.175
31.500
49.500
40.000
65.000
78.750
SXGA
LW17M24C, LW17M24CU
1280X1024
1280X1024
63.981
79.976
60.020
75.025
108.000
135.000
Sync Polarity
(H/V)
- / +
- / -
- / -
+ / +
+ / +
- / -
+ / +
+,- / -,+
+ / +
English-49
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 50
Retractable Stand
Note: The maximum tilt angle is 13 degrees in the backward direction.
Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause permanent damage to the mechanical part of the stand.
< LW20M21C / LW20M22C > model swivels left and right.
< LW15M23C / LW17M24C / LW17M24CU > < LW20M21C / LW20M22C >
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world.
A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies.
English-50
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 51
Using the Anti-Theft Kensington Lock
Cable
Figure 2
Figure 1
<Optional>
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately.
The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.
1.
Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).
2.
Connect the Kensington lock cable.
3.
Fix the Kensington lock to a desk or a heavy stationary object.
Installing VESA compliant mounting devices
<1> <2>
SC
AR
T
SC
AR
T
AR
T
< LW15M23C / LW17M24C /LW17M24CU>
Mounting pad
< LW20M21C / LW20M22C >
<1> Fold the stand pressing the button on the back of the stand.
<2> Align the mounting interface pad with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases.
English-51
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 52
Installing the Wall Mount Kit
(LW15M23C/LW17M24C/LW17M24CU)
Note : This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components
Please use provided components or parts to install the Wall Mount Kit.
Bracket Anchors : 3EA Screws : 3EA
How to assemble the Wall Mount Kit
1 Mark the location of hole on the wall using installation guide.
Make over 35mm- depth- hole on the marked location using
5.0-diameter drill.
Fix anchors on each hole on the wall.
Connect bracket to the wall with screws after fitting anchors into the bracket holes.
Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.
Installation Guide
2 You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture below.
3 When using LCD TV in stand-based form, place the product on a cushion or other soft materials. Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand.
(Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well.)
English-52
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 53
Installing the Wall Mount Kit
(LW15M23C/LW17M24C/LW17M24CU)
4 Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket.
When bracket is assembled on the wall How to hang LCD TV up on a hook When installation is completed
5 Remove Installation Guide after completing setup of monitor on the wall.
6 Push the LCD TV up and shift to the right to detach it from bracket.
When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.
How to adjust an angle
(1) Angle adjustment section of general stand-besd LCD TV
(2) Angle abjustment section while converting the form
(1->3, 3->1)
(3) Angle adjustment section of wall-mounted LCD TV
Picture(1) shows the adjustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).
Excessive tilting can turn LCD TV over which might cause damage to LCD TV.
Picture(2) shows the adjustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.
Picture(3) shows the adjustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.
Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wall-mounted one or vice versa.
- Click" sound indicates section change from 1 to 2 or 3 to 2(1->2, 3->2).
English-53
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 54
Installing the Wall Mount Kit
(LW20M21C/LW20M22C)
Note : This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components
Please use provided components or parts to install the Wall Mount Kit.
Bracket Anchors : 4EA Screws : 4EA
How to assemble the Wall Mount Kit
1 Mark the location of hole on the wall using installation guide.
Make over 35mm- depth- hole on the marked location using
5.0-diameter drill.
Fix anchors on each hole on the wall.
Connect bracket to the wall with screws after fitting anchors into the bracket holes.
Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2 You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture below.
Installation Guide
3 When using LCD TV in stand-based form, place the product on a cushion or other soft materials. Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand.
(Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well.)
English-54
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 55
Installing the Wall Mount Kit
(LW20M21C/LW20M22C)
4 Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket.
When bracket is assembled on the wall How to hang monitor up on a hook When installation is completed
5 Remove Installation Guide after completing setup of LCD TV on the wall.
6 Push the LCD TV up and shift to the right to detach it from bracket.
When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.
How to adjust an angle
(1) Angle adjustment section of general stand-besd LCD TV
(2) Angle abjustment section while converting the form
(1->3, 3->1)
(3) Angle adjustment section of wall-mounted LCD TV
Picture(1) shows the adjustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).
Excessive tilting can turn LCD TV over which might cause damage to LCD TV.
Picture(2) shows the adjustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.
Picture(3) shows the adjustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.
Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wallmounted one or vice versa.
English-55
UK-safty.qxd 5/17/05 9:08 AM Page 2
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.).
If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first.
• Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions.
• This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.
• To cut off the power source, unplug this apparatus from the wall outlet.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adaptor corrsponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket.
• Locate this apparatus near an easily acessible AC outlet.
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Unplug this apparatus from the AC outlet before any service.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.
UK-safty.qxd 5/17/05 9:08 AM Page 3
Wiring the Mains Power Supply Plug(UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
UNITED KINGDOM
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased.
However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung Electronics (U.K.) Ltd.,
Unit C, Customer Care Centre, Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
Tel: 0870) 242 0303, Fax: 01952) 297617
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.
04-BN68-00858Q-00Eng.qxd 5/17/05 9:07 AM Page 56
Memo
Advertisement
Key features
- Stunning picture quality with advanced LCD technology
- Immersive sound with built-in speakers
- Versatile connectivity options for multiple devices
- Slim and stylish design that complements any décor
- Easy-to-use on-screen menus for quick and convenient setup
- Energy-efficient operation to reduce your environmental impact