Samsung SGH-Z560 User manual

Samsung SGH-Z560 User manual
* Depending on the software installed or your service provider or country, some of the descriptions in
this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations
in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-12846A
English (SEA). 09/2006. Rev. 1.0
SGH-Z560
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Switch off the phone when refuelling
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in
an aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Important safety precautions
Be aware of special regulations
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volume, prolonged listening
to a headset can damage your hearing.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health
and safety information" on page 132.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
] Indicates a key on the phone. For example,
[
]
• 3G
Your phone is capable of operating in a 3G
environment, allowing much greater data
transfer speed, video streaming, and video
conferencing. To use 3G/HSDPA related
functions, you must use a USIM card and
be in the coverage of a UMTS network.
For availability of and subscription to 3G
services, contact your network operator
or service provider.
Special features of your phone
• Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
< > Indicates a soft key, whose function is displayed
on the phone screen. For example, <Select>
• Media player
Play media files on your phone. You can
enjoy high quality videos and music.
2
• File viewer
Open documents in various formats
on the phone without corruption.
• Web browser
Access the wireless web to get up-tothe-minute information and a wide
variety of media content.
• Get personal with photo caller ID
See who’s calling you with their very
own photo displays.
• Name card
Create name cards with your number
and profile. Whenever introducing
yourself to others, use this convenient
electronic name card.
• Multimedia Message Service
(MMS)
Send and receive MMS messages with
a combination of text, images, video,
and audio.
Special features of your phone
• Bluetooth
Transfer media files and personal data
and connect to other devices using
free, wireless Bluetooth technology.
• E-mail
Send and receive e-mails with image,
video, and audio attachments.
• Java
Enjoy Java™-based embedded games
and download new games.
• Organiser
Keep track of your daily, weekly, and
monthly schedule.
• Voice recorder
Record memos or sounds.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Keys, features, and locations
Get started
7
First steps to operating your phone
Install and charge the phone.............................. 7
Power on or off ................................................ 9
Keys and display .............................................. 9
Access menu functions .................................... 13
Customise your phone .................................... 14
Make/Answer calls .......................................... 18
Step outside the phone
4
19
Browse the web..............................................
Use Contacts..................................................
Send messages ..............................................
View messages ..............................................
Use Bluetooth ................................................
Switch applications .........................................
Use a memory card.........................................
22
22
24
26
28
29
30
Enter text
32
T9, ABC, Number, and Symbol modes
Call functions
35
Advanced calling features
Menu functions
41
All menu options listed
Solve problems
129
Help and personal needs
Begin with your camera, the media player, the web, and
other special features
Health and safety information
132
Use the camera.............................................. 19
Play media files .............................................. 20
Index
141
Overview of menu functions
To access Menu mode, press [OK] in Idle mode.
1 Call log
p. 41
4 Internet (continued)
1
2
3
4
5
6
7
8
p.
p.
p.
p.
p.
p.
p.
p.
3
4
5
6
7
Missed calls
Dialled calls
Received calls
Current contacts
Delete all
Data calls
Calls cost1
Calls time
41
42
42
42
42
42
43
43
2 Contacts
p. 44
1
2
3
4
5
6
7
8
9
0
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
Search contact
New contact
Groups
Speed dial
My name card
Copy all
Own number
Service number1
Settings
Memory status
44
46
47
48
48
49
49
49
50
50
3 Media player
p. 50
4 Internet
p. 54
1 Go to homepage
2 Enter URL
p. 54
p. 56
Bookmarks
Saved pages
History
Advanced
Browser settings
p.
p.
p.
p.
p.
56
56
57
57
58
5 Messages
p. 58
1
2
3
4
5
6
7
8
9
0
*
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
Create new
Inbox
Drafts
Outbox
Sent box
Email inbox
Templates
Broadcast
Delete all
Settings
Memory status
58
63
66
67
67
67
69
70
71
71
77
6 File manager
p. 77
Images
Videos
Music
Sounds
Games & More
Other files
Memory card2
p.
p.
p.
p.
p.
p.
p.
78
80
81
83
84
86
88
7 Organiser
p. 88
# Settings
p. 114
1
2
3
4
5
6
7
8
Calendar
Week view
Today’s events
Schedule
Anniversary
Task
Memo
Missed event
alarm
9 Memory status
p.
p.
p.
p.
p.
p.
p.
p.
1
2
3
4
5
6
7
p.
p.
p.
p.
p.
p.
p.
8 Camera
p. 93
9 Bluetooth
p. 101
* Applications
p. 104
1
2
3
4
5
6
p.
p.
p.
p.
p.
p.
SIM AT1
mPet
Voice recorder
World clock
Calculator
Converter
0 Alarms
88
91
92
92
92
92
92
93
p. 93
Profiles
Time & date
Phone
Display
Call
Connectivity
Application
settings
8 Security
9 Memory status
0 Reset settings
114
116
116
118
120
123
125
p. 126
p. 128
p. 129
1. Available only if supported by
your USIM/SIM card.
2. Shows only if a memory card is
inserted.
104
104
109
111
111
112
p. 113
5
Unpack
Make sure you have each item
• Phone
• Travel Adapter
• Battery
• PC Data Cable
• PC Link CD
• User’s Guide
You can obtain various
accessories from your local
Samsung dealer.
The items supplied with your
phone and the accessories
at your Samsung dealer may
vary, depending on your
country or service provider.
Your phone
Keys, features, and locations
Exterior
camera lens
Earpiece
Camera key
External display
Main display
Navigation keys
(Left/Right/Up/
Down)
Left soft key
Headset jack/
Adapter jack
Video call key
Volume keys
Dial key
Special
function keys
6
Memory card slot
Media player
control keys
Interior camera lens
Menu access/Confirm key
Right soft key
Application switch key
Power on/off/Menu exit key
Delete key
Alphanumeric keys
Microphone
Get started
First steps to operating your phone
Insert the USIM/
SIM card.
USIM/SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your PIN, and available optional services. For 3G
services, you can purchase a USIM (Universal
Subscriber Identity Module) card.
Make sure that the
gold-coloured
contacts on the card
are face down.
Install the battery.
Install and charge the phone
Remove the battery
cover.
If the phone is
already on, first turn
it off by pressing and
holding [
].
7
Get started
Reattach the
battery cover.
When the phone is completely charged (the
battery icon becomes still), unplug the
adapter from the power outlet.
Remove the adapter
from the phone.
Plug the travel
adapter into the
phone.
Low battery indicator
Plug the adapter into a standard AC power
outlet.
8
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
Do not turn on
the phone when
mobile phone
use is
prohibited.
Switch off
Keys
1. Open the phone.
2. Press and hold [
].
3. If necessary, enter the PIN
and press <Confirm>.
1. Open the phone.
2. Press and hold [
Get started
Switch on
Keys and display
].
Perform the function indicated on
the bottom line of the display.
In Idle mode, access your
favourite menus directly.p. 117
In Menu mode, scroll through
menu options.
In Idle mode, access Menu mode.
In Menu mode, select a
highlighted menu option or
confirm input.
Make a video call.
9
Get started
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or
received.
Delete characters from the display
or items in an application.
Press and hold to switch the phone
on or off.
End a call.
In Menu mode, cancel input and
return the phone to Idle mode.
Open the application switch
window to access other
applications without exiting the
current application.
10
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [1]
to access your voicemail server.
Press and hold [0] to enter an
international call prefix.
Enter special characters.
Press and hold [ ] to activate or
deactivate the Silent profile. Press
and hold [ ] to enter a pause
between numbers.
Adjust the phone volume.
In Idle mode, with the phone
open, adjust the key tone volume.
With the phone closed, press and
hold to turn on the display.
Display
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Return to the previous file during
playback.
Press and hold to launch or close
the media player.
Pause or resume playback.
Skip to the next file during
playback.
Get started
Press and hold to turn on the
camera.
In Camera mode, switch the
camera lens.
Select
Icons*
Back
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Received signal strength
Accessing services in a 2.5G
(GPRS) network; when
transferring data, this icon
animates
Accessing services in an
EDGE network; when
transferring data, this icon
animates
11
Get started
Accessing services in a 3G
(UMTS) network; when
transferring data, this icon
animates
Accessing services in a 3G+
(HSDPA) network; when
transferring data, this icon
animates
Roaming network
Voice call in progress
Out of your service area;
you cannot make or receive
voice calls
Video call in progress
Out of your service area;
you cannot make or receive
video calls
Memory card inserted
p. 30
12
Bluetooth active; When
transferring data, this icon
blinks red and blue
p. 101
Connected with PC via a
USB port
Browsing Internet on PC
using the phone as modem
Connected to secured web
page
New message:
•
: SMS
•
: MMS
•
: E-mail
•
: Voicemail
•
: Push
•
: Configuration
message
* Depending on your country or service provider, the
icons shown on the display may vary.
Access menu functions
Use the
soft keys
Get started
Inbox full:
•
: SMS
•
: MMS
•
: E-mail
•
: Voicemail
•
: Configuration
message
Profile settingp. 114
•
: Normal
•
: Meeting
•
: Car
•
: Silent
•
: Outdoor
•
: Offline
Battery power level
The roles of the soft keys vary
depending on the function you
are using. The bottom line of
the display indicates their
current role.
Select
Press the left
soft key to
select the
highlighted
option.
Back
Press the right
soft key to
return to the
previous menu
level.
13
Get started
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select> or [OK] to
confirm the function
displayed or option
highlighted.
4. To exit, choose either of the
following methods:
• Press <Back> to move up
one level.
• Press [ ] to return to
Idle mode.
14
Use
shortcuts
Press the number key
corresponding to the option you
want.
Customise your phone
Display
language
1. In Idle mode, press [OK]
and select Settings →
Phone → Language →
Screen text.
2. Select a language.
3. Press <Save>.
You can change the call ringer
by changing the properties of
the currently active sound
profile.
To change the profile
properties:
5. Select Video call ringtone
and select a ringtone for
video calls.
1. In Idle mode, press [OK]
and select Settings →
Profiles.
1. In Idle mode, press [OK]
and select Settings →
Profiles.
2. Scroll to the sound profile
you are using.
Get started
Call ringer
melody
6. Press <Options> and
select Save.
To change the sound profile:
2. Select the profile you want.
3. Press <Options> and
select Edit.
4. Select Voice call ringtone
and select a ringtone for
voice calls.
15
Get started
Idle mode
Wallpaper
You can set a wallpaper for the
idle screen on each display.
For the main display:
1. In Idle mode, press [OK]
and select Settings →
Display → Wallpaper →
Images.
2. Scroll to an image folder.
3. Select an image.
4. Press <Set>.
For the external display:
1. In Idle mode, press [OK]
and select Settings →
Display → Cover LCD.
2. Select an image type.
16
3. For Clock, scroll to a clock
type and press <Save>.
For Cover title, enter a
greeting and press
<Save>.
For Wallpaper, press
<Change> and select
an image. If necessary,
select the portion of the
image to be displayed
and press [OK]. Then
press [OK] to save the
image.
4. Press <Change>.
You can set the Navigation
keys to function as shortcuts
to access your favourite
menus.
1. In Idle mode, press [OK]
and select Settings →
Phone → Shortcuts.
2. Select a key.
3. Select a menu to be
assigned to the key.
Silent profile
You can activate the Silent
profile to avoid disturbing
other people.
Press and hold [ ] in Idle
mode.
Phone lock
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password on powerup.
1. In Idle mode, press [OK]
and select Settings →
Security → Change phone
password.
2. Enter the default password,
00000000, and press
<Confirm>.
3. Enter a new 4- to 8-digit
password and press
<Confirm>.
4. Enter the new password
again and press <Confirm>.
5. Select Phone lock.
17
Get started
Menu
shortcuts
Get started
Phone lock
(continued)
6. Select Enable.
Answer
a call
7. Enter the password and
press <Confirm>.
Make/Answer calls
Make a call
Adjust the
volume
during a call
1. Enter an area code and
phone number.
].
3. To end the call, press [
To make a video call:
].
1. Enter an area code and
phone number.
2. Press [
].
3. To end the call, press [
18
2. For a video call, press
<Show me> to allow the
other person to see you.
3. To end the call, press [
To make a voice call:
2. Press [
1. When the phone rings,
press [ ].
].
Press [ / ].
].
Step outside the phone
Begin with your camera, the media player, the web,
and other special features
5. Press [OK] to take a photo.
The photo is saved
automatically.
Use the camera
6. Press <Back> or <
take another photo.
Take a photo
1. Open the phone.
2. In Idle mode, press and
hold [ ] to turn on the
camera.
3. Press [ ] to switch
between the interior camera
lens and exterior camera
lens.
4. Aim the lens at the subject
and make any desired
adjustments.
View a photo
> to
1. In Idle mode, press [OK]
and select File manager →
Images.
2. Select the photo you want
from the Pictures folder.
Record a
video
1. In Idle mode, press and
hold [ ] to turn on the
camera.
2. Press [1] to switch to
Record mode.
19
Step outside the phone
Record a
video
(continued)
3. Press [ ] to switch
between the interior camera
lens and exterior camera
lens.
4. Press [OK] to start
recording.
5. Press [OK] to stop
recording. The video is
saved automatically.
6. Press <Back> to record
another video.
Play a video
1. In Idle mode, press [OK]
and select File manager →
Videos.
2. Select the video you want
from the Videos folder.
20
Play media files
Copy media
files to the
phone
Use these methods:
• Download from the wireless
webp. 54
• Download from a computer
using the optional Samsung
PC StudioSamsung PC
Studio User’s Guide
• Receive via Bluetooth
p. 104
• Copy to a memory card and
insert the card into the
phonep. 30
1. In Idle mode, press [OK]
and select Media player.
2. Press [OK].
3. Press <Options> and
select Add → Folder or
Files.
4. Scroll to the folder you
want, or press [OK] to
select the files you want.
5. Press <Select> or <Add>.
Play media
files
1. From the media player
screen, press [OK].
2. Select the file you want.
3. During playback, use the
following keys:
• OK: pauses or resumes
playback.
• Up: accesses the play
list.
• Left: returns to the
previous file. Moves
backward in a file when
held down.
• Right: skips to the next
file. Skips forward in a
file when held down.
•
/ : adjusts the
volume.
Step outside the phone
Create a
play list
4. Press [Down] to stop
playback.
21
Step outside the phone
Browse the web
Using a built-in web browser, you can easily
access the wireless web to get a variety of upto-date services and information and to
download web content.
Launch the
web
browser
Navigate
the web
22
In Idle mode, press [OK] and
select Internet → Go to
homepage.
• To scroll through browser
items, press [Up] or [Down].
• To select an item, press
<Select> or [OK].
• To return to the previous
page, press <Back>.
• To access options, press
<Options>.
Use Contacts
Add a
contact
To the phone’s memory:
1. In Idle mode, enter a phone
number.
2. Press <Options> and
select Save to Contacts →
Phone → New → a number
type.
3. Specify contact information:
First name, Last name,
Phone number, Work Email,
Home Email, Group,
Homepage, Birthday, and
More information (Job title,
Department, Company,
Nickname, and Notes).
1. In Idle mode, enter a phone
number.
2. Press <Options> and
select Save to Contacts →
SIM → New.
3. Specify contact information:
Name, Phone number,
Group (for USIM), and
Location number.
Find a
contact
1. In Idle mode, press [OK]
and select Contacts →
Search contact.
Step outside the phone
4. Press <Options> and
select Save to save the
contact.
To the USIM/SIM card:
2. Enter the first few letters of
the name you want.
3. Select a contact.
4. Scroll to a number and
press [ ] to dial, or press
[OK] to edit contact
information.
4. Press <Save>, or press
<Options> and select
Save to save the contact.
23
Step outside the phone
Create and
send a name
card
1. In Idle mode, press [OK]
and select Contacts → My
name card.
2. Specify your contact
information.
Send messages
Send a text
message
(SMS)
1. In Idle mode, press [OK]
and select Messages →
Create new → Text
message.
3. Press <Options> and
select Save to save the
name card.
2. Enter the message text and
press [OK].
4. To send the name card,
access My name card
again.
4. Press [OK] to send the
message.
5. Press <Options> and
select Send name card →
a sending method.
3. Enter destination numbers.
Send a
multimedia
message
(MMS)
1. In Idle mode, press [OK]
and select Messages →
Create new → Multimedia
message.
2. Enter the message subject.
3. Select Text.
24
5. Select Picture or Video or
Audio.
6. Add an image, video clip, or
sound clip.
7. Press <Options> and
select Send.
8. Enter destination numbers
or e-mail addresses.
9. Press [OK] to send the
message.
Send files by
MMS
1. In Idle mode, press [OK]
and select Messages →
Create new → File
messenger.
2. Enter the message subject.
3. Move to the Message field.
4. Enter the message text.
5. Move to the Attach files
line.
6. Press <Options> and select
Add files, Add name card,
or Add v-calendar.
7. Select images, videos,
sounds, name cards, or
calendar data.
8. Press <Options> and select
Attach.
9. Press [OK].
10.Enter destination numbers
or e-mail addresses.
11.Press [OK] to send the
message.
25
Step outside the phone
4. Enter the message text and
press [OK].
Step outside the phone
Send an
e-mail
1. In Idle mode, press [OK]
and select Messages →
Create new → Email.
9. Press [OK].
10.Enter e-mail addresses.
11.Press [OK] to send the
e-mail.
2. Enter the e-mail subject.
3. Move to the Message field.
4. Enter the e-mail text.
5. Move to the Attach files
line.
6. Press <Options> and
select Add files, Add
name card, or Add vcalendar.
7. Select images, videos,
sounds, name cards, or
calendar data.
8. Press <Options> and
select Attach.
26
View messages
View a text
message
When a notification appears:
1. Press <View>.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press [OK] and
select Messages → Inbox.
2. Select an SMS message
(
).
When a notification appears:
1. Press <View>.
2. Select the message from
the Inbox.
From the Inbox:
1. In Idle mode, press [OK]
and select Messages →
Inbox.
2. Select an MMS message
(
).
View an
e-mail
1. In Idle mode, press [OK]
and select Messages →
Email inbox.
Step outside the phone
View a
multimedia
message
2. Press <Options> and
select Download to
download new e-mails or
headers.
3. Select an e-mail or header.
4. If you selected a header,
press <Options> and
select Retrieve to view the
body of the e-mail.
27
Step outside the phone
Use Bluetooth
Your phone is equipped with Bluetooth
technology, enabling you to connect the phone
wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Turn on
Bluetooth
1. In Idle mode, press [OK]
and select Bluetooth →
Activation → On.
2. Select My phone’s
visibility → On to allow
other devices to find your
phone.
28
Search for
and pair with
a Bluetooth
device
1. In Idle mode, press [OK]
and select Bluetooth → My
devices → Search new
device.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth
PIN, if it has one, and press
<OK>.
When the owner of the
other device enters the
same code, pairing is
complete.
1. Access an application,
Contacts, File manager,
Calendar, Schedule, or
Task.
Receive data
2. If necessary, press <Yes>
to confirm that you are
willing to receive.
2. Select the item you want to
send.
3. Press <Options> and
select Send name card/
Send/Send schedule/
Send task → Via
bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
<OK>.
1. When a device attempts to
access your phone, press
<Yes> to permit the
connection.
Step outside the phone
Send data
Switch applications
You can switch to other applications from a
menu, without closing the menu screen you
were using.
Switch to an
application
1. While using a menu, press
[ ].
2. Select an application.
29
Step outside the phone
Available
applications
Close all
running
applications
• Call: opens the dialling
screen.
• Messages: accesses the
Messages menu.
• Internet: launches the web
browser.
1. Press [
].
2. Scroll to End all?.
3. Press <Yes>.
Use a memory card
You can use an optional microSD memory card
to increase your phone’s memory capacity.
30
Important
memory
card
information
• Frequent erasing and
writing will shorten a card’s
lifespan.
• Do not remove a card from
the phone or turn off the
phone while data is being
accessed or transferred.
This could result in loss of
data and/or damage to the
card or phone.
• Do not subject cards to
strong shocks.
• Do not touch card terminals
with your fingers or metal
objects. If dirty, wipe the
card with a soft cloth.
• Keep cards away from small
children or pets.
Remove the
memory
card
1. Insert a memory card into
the memory card slot, with
the label side face up.
Use a card
adapter
1. Press the card so that it is
disengaged from the phone.
2. Remove the card from the
slot.
Using a card adapter and a
USB card reader/writer, you
can read the card on a PC.
1. Insert a memory card into a
card adapter, and then the
adapter into a card reader/
writer.
2. Plug the USB connecter of
the card reader/writer into
the USB port on your PC.
2. Press the card until it locks
into place.
3. Access the appropriate
memory disk and copy to
and from the card.
31
Step outside the phone
Insert a
memory
card
• Do not expose cards in a
place subject to electrostatic discharge and/or
electrical noise.
Enter text
T9, ABC, Number, and Symbol modes
You can enter text for some features such as
Messages, Contacts, or Organiser, using ABC
mode, T9 mode, Number mode, and Symbol
mode.
Changing the text input mode
• Press and hold [ ] to switch between T9
(
) and ABC (
) modes.
• Press [ ] to change case or to switch to
Number mode (
).
• Press and hold [ ] to switch to Symbol
mode (
).
32
Using T9 mode
T9 is a predictive text input mode that allows
you to enter any character using single
keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word.
Press each key once for each letter.
For example, press [4], [3], [5], [5], and
[6] to enter Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that you
press.
2. Enter the whole word before editing or
deleting characters.
3. When the word displays correctly, go to step
4. Otherwise, press [0] to display alternative
word choices for the keys that you have
pressed.
For example, Of and Me use [6] and [3].
Other T9 mode operations
• Press [1] to enter periods or apostrophes
automatically.
• Press [ ] to insert a space.
• Press the Navigation keys to move the
cursor.
• Press [C] to delete characters one by one.
Press and hold [C] to clear the entire display.
4. Enter the word you want using ABC mode
and press <Add>.
Enter text
4. Press [ ] to insert a space and enter the
next word.
Using ABC mode
Press the appropriate key until the character
you want appears on the screen.
Key
Characters in order displayed
Upper case
Lower case
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for
your key presses. When there are no more
alternative words, Spell displays on the
bottom line.
3. Press <Spell>.
(Creating an SMS message with GSM alphabet encoding)
33
Enter text
Other ABC mode operations
Using Symbol mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
• Press [ ] to insert a space.
• Press the Navigation keys to move the
cursor.
• Press [C] to delete characters one by one.
Press and hold [C] to clear the entire display.
Symbol mode enables you to insert symbols.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you
want.
34
To
Press
display more symbols [Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered
symbols
[C].
insert the symbols
<OK>.
Redialling recent numbers
Call functions
1. In Idle mode, press [ ] to display the list
of recent numbers.
2. Scroll to the number you want and press
[ ].
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
• Press [C] to clear the last digit or press
and hold [C] to clear the whole display.
• Press and hold [ ] to enter a pause
between numbers.
2. Press [ ].
3. When you want to end the call, press [
Making an international call
1. In Idle mode, press and hold [0]. The +
character appears.
2. Enter the country code, area code, and
phone number, then press [ ].
].
Making a call from Contacts
Once you have stored a number in Contacts,
you can dial the number by selecting it from
Contacts.p. 44
You can also use the speed dial feature to
assign your most frequently dialled numbers to
specific number keys.p. 48
You can quickly dial a number from the USIM/
SIM card using its location number assigned
when stored.
1. In Idle mode, enter a location number and
press [ ].
2. Scroll through other numbers, if necessary.
35
Call functions
3. Press <Call> or [ ] to make a voice call,
or <V-Call> or [ ] to make a video call.
Answering a call
When you receive an incoming call, the phone
rings and displays the incoming call image.
Press <Accept> or [ ] to answer the call.
36
Viewing missed calls
If you have missed calls, the screen displays
how many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Tips for answering a call
Using the headset
• When Anykey answer is active, you can
press any key, except for <Reject> and
[ ].p. 117
• When Active folder is active, you can
simply open the phone.p. 117
• Press <Reject> or [ ] to reject a call.
• Press and hold [ / ] to reject a call or mute
the ringer, depending on the Volume key
setting.p. 117
Use the headset to make or answer calls
without holding the phone.
Connect the headset to the jack on the left side
of the phone. The button on the headset works
as follows:
To
Press
redial the last call
the button twice.
answer a call
the button.
end a call
and hold the button.
Options during a call
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during
a call.
Press [ ] to increase the volume level and
press [ ] to decrease the volume level.
Placing a call on hold/Retrieving
Press <Hold> to place a call on hold, or press
<Unhold> to retrieve the call.
Making a second call
You can make another call if your network
supports this function.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select Drop → Drop
held call to end the call on hold.
5. To end the current call, press [ ].
Call functions
You can access a number of functions during a
call.
Answering a second call
You can answer an incoming call while already
on the phone, if your network supports this
function and you have activated the call waiting
feature.p. 121
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select Drop → Drop
held call to end the call on hold.
4. To end the current call, press [ ].
1. Press <Hold> to put the call on hold.
37
Call functions
Using the speakerphone feature
Use the phone as a speakerphone to talk and
listen with the phone a short distance away.
Press [OK] and then <Yes> to activate the
speakerphone feature. Press [OK] again to
switch back to the earpiece.
Using In-call options
During a call, press <Options> to access the
following options:
• Loudspeaker/Loudspeaker off: turn on
the speakerphone feature or switch back to
Normal mode.
• Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit, or back to the phone. To
use this feature, you first need to connect
your headset or car kit to the phone.
p. 102
38
• Join: set up a multi-party call by adding a
caller on hold to a currently active call. You
can include up to 5 people on a multi-party
call.
• Split: have a private conversation with one
multi-party call participant. The other
participants can converse with each other.
After the private conversation, select Join to
return both private participants to the multiparty call.
• Drop: disconnect the call currently on hold
or active call.
• Drop call: disconnect one multi-party call
participant.
• Transfer: transfer the currently active call
to a caller on hold. The two callers can talk
to each other, but you are disconnected from
the call.
• Mute/Unmute: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
To communicate with answering machines or
computerised telephone systems, Unmute
key tone must be selected.
• New call: make a new voice call.
• Contacts: locate or store contacts in
Contacts.
• Send text message: create and send a
new SMS message.
• Send DTMF: send DTMF (Dual tone multifrequency) tones as a group. The DTMF
tones are the tones used in phones for tone
dialling, sounding when you press the
number keys. This option is helpful for
entering a password or an account number
when you call an automated system, like a
banking service.
• Memo: create a memo.
• End call/End calls: disconnect the call
currently on hold, active call, or all calls.
Call functions
• Mute key tone/Unmute key tone: turn
the key tones off or on.
Using the video call feature
In a 3G (UMTS) service area, your phone can
make or receive a video call, allowing you to
see another person on the screen during a
conversation. The other person’s phone must
support the video call feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Answering a video call
When you receive a video call, answer a video
call as receiving a voice call. Press <Show
me> to allow the caller to see you.
39
Call functions
Using video call options
During a video call, press <Options> to access
the following options:
• Loudspeaker off/Loudspeaker: turn off or
on the speakerphone feature.
• Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit, or back to the phone. To
use this feature, you first need to connect
your headset or car kit to the phone.
p. 102
• Mute camera/Unmute camera: turn off or
on the camera.
• Mute voice/Unmute voice: turn off or on
the microphone.
• Mute camera & voice/Unmute all: turn
off or on the camera and the microphone.
• Mute key tone/Unmute key tone: turn off
or on the key tones.
40
• Switch camera: switch between the interior
camera lens and exterior camera lens.
• Zoom: display the zoom control bar and
zoom in or out by pressing [Up] or [Down].
• Brightness/Hide brightness: display the
brightness control bar and adjust the
brightness by pressing [Left] or [Right], or
hide the control bar.
• Effects: change the colour tone of the
image.
• Hide information/Show information:
hide or display information about the video
call.
• Send DTMF: send Dual tone multifrequency (DTMF) tones as a group after
entering the entire number you need to send
or retrieving a number from Contacts.
• Video quality: change the image quality of
the camera.
• End call: disconnect the video call.
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, the length of the
calls. You can also check the cost of your calls,
if your USIM/SIM card supports this function.
To access this menu, press [OK] in Idle mode
and select Call log.
Missed calls (Menu 1.1)
This menu displays the most recent calls you
did not answer.
Accessing a call log
1. Press [Left] or [Right] to move to another
call type.
2. Press [Up] or [Down] to scroll through the
call list.
3. Press [OK] to view the details of a call, or
[ ] to dial a number.
Using call log options
While viewing call details, press <Options> to
access the following options:
• Voice call: make a voice call to the number.
• Video call: make a video call to the number,
if the 3G service is available.
• Use number: paste the selected number to
the normal dialling screen.
• Save to Contacts: save the number to
Contacts.
41
Menu functions
• Send message: send a message to the
selected number via SMS, MMS, or File
messenger.
• Delete: delete the selected call log.
• Delete all: delete all call logs.
Dialled calls (Menu 1.2)
This menu displays the most recent calls you
have dialled.
Received calls (Menu 1.3)
This menu displays the most recent calls you
have received.
Current contacts (Menu 1.4)
This menu displays all of the calls you have
dialled, received, or missed.
42
Delete all (Menu 1.5)
Use this menu to delete all logs in each call
type.
1. Press [OK] to select the call types to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
If your phone is locked, it will ask the phone
password. The password is preset to
00000000. You can change this password.
p. 127
Data calls (Menu 1.6)
Use this menu to view the total amount of sent
or received data.
• Total sent: check the total amount of data
you have sent.
Calls cost (Menu 1.7)
This network feature displays the cost of calls.
This menu is available only if supported by your
USIM/SIM card. Note that this is not intended
to be used for billing purposes.
• Total costs: check the total cost of all your
calls. If the total cost exceeds the maximum
cost set in Edit cost limit, you must reset
the counter before you make another call.
Call log (Menu 1)
If the phone is locked, it will require the phone
password. The password is preset to
00000000. You can change this password.
p. 127
• Last call cost: check the cost of your last
call.
• Max cost: check the maximum cost set.
Press <Options> to access the following
options:
• Reset call cost: reset the cost counters.
• Edit cost limit: set the maximum cost
authorised for your calls.
• Setup currency: set the currency that is
applied when the cost of your call is
calculated.
Menu functions
• Total received: check the total amount of
data you have received.
To reset a counter or all counters, press
<Options> and select Reset or Reset all.
Calls time (Menu 1.8)
This menu displays the time log for voice and
video calls made and received. The actual time
invoiced by your service provider will vary.
•
Total dialled: check the total length of
voice calls dialled.
43
Menu functions
•
Total received: check the total length of
voice calls received.
Total dialled: check the total length of
•
video calls dialled.
•
Total received: check the total length of
video calls received.
To reset a counter or all counters, press
<Options> and select Reset or Reset all.
If the phone is locked, it will require the phone
password. The password is preset to
00000000. You can change this password.
p. 127
Contacts
(Menu 2)
You can store phone numbers on your USIM/
SIM card and in your phone’s memory. The
USIM/SIM card and phone’s memory are
physically separate, but they are used as a
single entity called Contacts.
To access this menu, press [OK] in Idle mode
and select Contacts.
Search contact (Menu 2.1)
Use this menu to search for contact information
in Contacts.
You can quickly access this menu by pressing
<Contacts> in Idle mode.
Finding a contact
1. Enter the first few letters of the name that
you want to find.
44
Using contact options
Contacts (Menu 2)
While viewing contact details, press
<Options> to access the following options:
• Edit: edit contact information.
• Send message: send a message to the
selected number or e-mail address via SMS,
MMS, File messenger, or e-mail.
• Special options: set the following options:
Picture: assign a caller ID image to alert
you to a call from the person.
Ringtone: assign a ringtone to alert you to
a call from the person.
Msg. alert tone: select a ringtone to alert
you to an incoming message from the
person.
• Add to speed dial: set the selected number
as a speed dial entry.
• Video call: make a video call to the number,
if the 3G service is available.
• Copy to SIM/Copy to phone: copy the
contact from the phone’s memory to the
USIM/SIM card, or vice versa.
• Send name card: send the contact via
SMS, MMS, e-mail, File messenger, or
Bluetooth.
• Print via Bluetooth: print contact
information via a Bluetooth compatible
printer.
• Use number: paste the selected number to
the normal dialling screen.
• Delete: delete the contact.
Menu functions
2. Select the name you want from the list.
3. Scroll to a number and press [ ] to dial, or
press [OK] to edit contact information.
45
Menu functions
New contact (Menu 2.2)
Use this menu to add a new contact to
Contacts.
Storing a contact to the phone’s
memory
1. Select Phone.
2. Change the settings or enter information
about the contact:
• First name/Last name: assign a name.
• Phone number: add a phone number.
• Work Email: assign a business e-mail
address.
• Home Email: assign a personal e-mail
address.
• Group: assign a caller group.
• Homepage: enter a homepage address.
• Birthday: enter the person’s birthday.
46
• More information: enter the job title,
department, company, nickname, and
additional note of the person.
3. Press <Options> and access the following
options to add additional information:
• Special options: assign a caller ID
image, call ringer, or message ringer for
the contact.
• Add phone number: add a phone
number in any type to the contact.
• Delete phone number: remove the
selected number type from the contact.
• Change type: change the number type
from the contact.
• Mark video call/Unmark video call: set
the selected number as a video call
number, or cancel the setting.
4. Press <Options> and select Save to save
the contact.
Groups (Menu 2.3)
1. Select SIM.
2. Enter information about the contact:
• Name: assign a name.
• Phone number: add a phone number.
• Group: (For USIM) assign a caller group.
• Location number: enter a location
number.
3. If you are using a USIM card, press
<Options> to add additional information:
• Add item: add a number type to the
contact.
• Delete item: remove the selected
category from the contact.
4. Press <Save>, or press <Options> and
select Save to save the contact.
Use this menu to organise your contacts in
caller groups.
Menu functions
Storing a contact to the USIM/SIM card
Adding members to a caller group
Contacts (Menu 2)
1. Select a group.
2. Press [OK] to select the contacts to be
added.
3. Press <Save>.
Managing caller groups
From the group list, press <Options> to access
the following options:
• View members: display the members of
the selected group.
• Add member: add contacts to the selected
group, if the group does not have any.
• Add group: add a new group.
• Rename group: change the group name.
47
Menu functions
• Delete group: delete the selected group.
Group members, however, will not be
deleted from Contacts.
• Delete all groups: delete all groups
including default groups.
Speed dial (Menu 2.4)
Use this menu to assign speed dial numbers (2
to 9) to 8 of your most frequently dialled
numbers.
Assigning speed dial numbers
1. Select a key location from 2 to 9. Key 1 is
reserved for your voicemail server.
2. Select a contact from the contact list.
3. Select a number.
Managing speed dial entries
From the Speed dial screen, press <Options>
to access the following options:
• Add: assign a number to an unassigned key.
• Details: check the name and number
assigned to a key.
• Video call: make a video call to the number
assigned to a key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a
key.
Dialling speed dial numbers
In Idle mode, press and hold the appropriate
key.
My name card (Menu 2.5)
Use this menu to create your name card and
send it to other people.
48
Copy all (Menu 2.6)
The procedure for creating your name card is
the same as the one for saving a phone number
in the phone’s memory.p. 46
Use this menu to copy all of the contacts stored
on the USIM/SIM card to the phone’s memory,
or vice versa.
Using name card options
Own number (Menu 2.7)
Use this feature to check your phone numbers,
or to assign a name to each of the numbers.
Changes made here do not affect the actual
subscriber numbers on your USIM/SIM card.
Contacts (Menu 2)
After saving your name card, press <Options>
to access the following options:
• Edit: edit the name card.
• Send name card: send the name card via
SMS, MMS, e-mail, File messenger, or
Bluetooth.
• Print via Bluetooth: print your contact
information via a Bluetooth-compatible
printer. Some printers may not be
compatible with the phone.
• Delete: delete the name card.
Menu functions
Saving your name card
Service number (Menu 2.8)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service
provider, including emergency numbers and
numbers for directory enquiries. This menu is
available if your USIM/SIM card supports SDN.
Scroll to the number you want and press [ ].
49
Menu functions
Settings (Menu 2.9)
Media player
Use this menu to change the default settings for
Contacts entries.
• Viewing settings: change the sort order of
the contact list.
• Default storage settings: select a default
memory location for saving contacts. If you
select Optionally, the phone will ask you to
select a memory location each time you save
a number.
You can play music and video files. To enjoy
high quality music, you can use an optional
Bluetooth stereo headset.
Memory status (Menu 2.0)
Use this menu to check the number of contacts
you have stored in the phone’s memory and on
the USIM/SIM card.
50
(Menu 3)
Normal headsets and Bluetooth mono headsets
are not compatible with the media player.
To access this menu, press [OK] in Idle mode
and select Media player.
Downloading or receiving music or
video files
You can play the following types of files on your
phone:
• Music: MP3, AAC, WAV, 3GA, M4A
• Video: MP4, 3GP, RM, RAM, RV
Use the following methods to save music or
video files to your phone’s memory:
• Download from the wireless webp. 54
Add the media files to the play list so you can
play them.
1.
2.
3.
4.
From the media player screen, press [OK].
Press <Options> and select Add.
Select Folder or Files.
Scroll to the folder you want or press [OK]
to select the files you want.
5. Press <Select> or <Add>.
1. From the media player screen, press [OK].
2. Select a file. The file plays.
During playback, use the following keys:
Key
Function
OK
Pauses or resumes playback.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward
in a file when held down.
Up
Accesses the play list.
/
Down
Media player (Menu 3)
Creating a play list
Playing media files
Menu functions
• Download from a computer using Samsung
PC StudioSamsung PC Studio User’s
Guide
• Receive via an active Bluetooth connection
p. 104
• Copy to a memory card and insert the card
into the phonep. 30
Downloaded or received files are stored in the
Downloads folder in Music or Videos.
Adjusts the volume.
Stops playback.
51
Menu functions
Using media player options
While playing a file, press <Options> to access
the following options:
• Pause/Resume: pause or resume playback.
• Stop: stop playback.
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch sound output to
a Bluetooth stereo headset or phone
speaker.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Open play list: access the play list.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Go to File Manager: access all music and
video files.
52
• Hidden from Bluetooth/Visible to
Bluetooth: hide the file so that other
Bluetooth devices cannot access it, or share
the file with other Bluetooth devices.
• Show controller/Hide controller: display
or hide the control bar of Media player.
• Details: access the file properties.
• Player settings: change the default
settings for playing media files:
Play options: select a repeat mode.
Volume: select a volume level.
Controller: display or hide the controller
image.
Audio player skin: select a skin image.
• VOD settings: select a connection profile to
be used for accessing a video streaming
server. You can also create or edit a profile.
p. 124
Using play list options
Playing music files with the phone
closed
Menu functions
Press and hold [
] to launch the media player
and start playback. Use the following keys to
control the media player:
Key
Function
Pauses or resumes playback. Closes
the media player when held down.
Media player (Menu 3)
From the media player screen, press [Up].
Press <Options> to access the following
options:
• Play via: play the selected music file via the
phone speaker or a Bluetooth stereo
headset.
• Play: play the selected video clip.
• Add: add files to the play list.
• Remove: remove the selected file or all files
from the current play list.
• Move: move the selected file to the position
you want within the current play list or
another play list.
• Copy: make a copy of the selected file in the
current play list or another play list.
• New list: add a new play list.
Returns to the previous file. Moves
backward in a file when held down.
Skips to the next file. Skips forward
in a file when held down.
/
Adjusts the volume.
Locks the exposed keys when held
down to keep accidental presses
from affecting playback.
53
Menu functions
Internet
(Menu 4)
The web browser on your phone allows you to
access the wireless web. Using the web
browser, you can access up-to-date information
and a wide variety of media contents, such as
wallpapers, ringtones, and music files.
To access this menu, press [OK] in Idle mode
and select Internet.
Go to homepage (Menu 4.1)
Use this menu to connect your phone to the
network and load the homepage of the wireless
web service provider.
Navigating the web browser
To
Press
scroll through browser [Up] or [Down].
items
54
To
Press
select a browser item
[OK] or <Select>.
return to the previous <Back>.
page
Using browser options
From any web page, press <Options> to
access the following browser options:
• Go to: go to the currently linked web page.
• Go: move backward or forward through
pages in history.
• Reload: reload the current page with
updated information.
• Desktop view/Smart-fit view: change the
display mode of the browser.
• Page size: change the page size.
• Go to homepage: return to the homepage.
Empty cookies: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
Cookie options: set whether or not cookies
are stored. If you select Prompt, the phone
will ask you to save the cookies of the
current page.
Preferences: change the settings for the
web browser to suit your preference.
Certificates: access certificate information.
Page details: access the page properties.
Browser settings: select a connection
profile to be used for connecting to the
Internet. You can also create or edit a
profile.p. 124
About browser: access version and
copyright information about the browser.
Menu functions
Internet (Menu 4)
• Add to Bookmarks: bookmark the current
page.
• View bookmarks: access the bookmark
list.
• Enter URL: enter a URL address manually.
• Copy URL: send the URL of the current page
via SMS, MMS, or e-mail.
• Save: save the image of the current web
page or the current page.
• Saved pages: access the list of web pages
you have saved.
• History: access the list of web pages you
have accessed.
• Advanced: change the various settings for
the browser.
Clear cache: clear the cache. The cache is a
temporary memory site that stores recently
accessed web pages.
Exiting the web browser
Press [ ] to end the network connection and
exit the browser.
55
Menu functions
Enter URL (Menu 4.2)
Use this menu to manually enter a URL address
and access the associated web page.
You can add the entered URL to the Bookmarks
list by selecting Add bookmark.
Bookmarks (Menu 4.3)
Use this menu to save URL addresses in order
to quickly access web pages, or access the
preset bookmarks.
Adding a new bookmark
1. Press <Options> and select Add
bookmark.
2. Enter a title and press [Down].
3. Enter a URL address and press <Save>.
56
Using bookmark options
From the bookmark list, press <Options> to
access the following options:
• Go to: access the bookmarked web page.
• Enter URL: enter a URL address manually.
• Edit bookmark: edit the URL address and
title of the bookmark, if you selected an
added one.
• Add bookmark: add a new bookmark.
• Copy URL: send the URL address of the
bookmark via SMS, MMS, or e-mail.
• Delete: delete the selected bookmark or all
bookmarks, except for the preset ones.
Saved pages (Menu 4.4)
You can access the list of pages you have
saved. Select a URL from the list to access the
corresponding web page.
You can access the list of pages you have
accessed.
Select a URL from the list to access the
corresponding web page.
From the history list, press <Options> to
access the following options:
• Go to: access the selected web page.
• Delete: delete the selected web page or all
pages.
• Details: access the properties of the web
page.
You can access the advanced browser options.
• Clear cache: clear the cache. The cache is a
temporary memory site that stores recently
accessed web pages.
• Empty cookies: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
• Cookie options: set whether or not cookies
are stored. If you select Prompt, the phone
will ask you to save the cookies of the
current page.
• Preferences: change the settings for the
web browser to suit your preference.
• About browser: access version and
copyright information about the browser.
Internet (Menu 4)
History (Menu 4.5)
Advanced (Menu 4.6)
Menu functions
From the saved page list, press <Options> to
access the following options.
• View: access the selected web page.
• Rename: change the saved page name.
• Delete: delete the selected web page or all
pages.
57
Menu functions
Browser settings (Menu 4.7)
Create new (Menu 5.1)
Use this menu to select a connection profile to
be used for connecting to the Internet. You can
also create or edit a profile.p. 124
Use this menu to create and send text
messages, multimedia messages, or e-mails.
You can also send files using MMS.
Messages
(Menu 5)
Use the Messages menu to send and receive
text messages, multimedia messages, and
e-mails. You can also access push messages,
voicemails, broadcast messages, and
configuration messages.
To access this menu, press [OK] in Idle mode
and select Messages.
You can quickly access this menu by pressing
<Msg.> in Idle mode.
58
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to
send or receive text messages.
Creating and sending an SMS message
1. Enter your message and press [OK].
• The maximum number of characters
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the
phone will split the message.
• You can use various options by pressing
<Options>.next section
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and audio, from phone to phone
or from phone to e-mail.
Creating and sending an MMS message
1. Enter the message subject.
Messages (Menu 5)
Using options while composing an SMS
message
While composing a message, press <Options>
to access the following options:
• Send: send the message.
• Input method: change the text input
mode.
• Input language: change the language to
be used in T9 input mode.
• Insert: insert a text template, Contacts
entry, or bookmarked URL address.
• Save to Drafts: save the message in the
Drafts folder.
Multimedia message (Menu 5.1.2)
Menu functions
2. Enter a destination number.
To send the message to more than one
recipient, fill in additional destination fields.
3. Press [OK] to send the message.
You can use various options by pressing
<Options> in each field.next section
2. Select the Text line.
3. Enter the message text and press [OK].
4. Select the Picture or Video or Audio line
and add an image, video, or sound clip.
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files
may not be able to be forwarded.
59
Menu functions
5. When you have finished, press [OK].
6. Enter a phone number or e-mail address.
To send the message to more than one
recipient, fill in additional destination fields.
7. Press [OK] to send the message.
Using options while composing an MMS
message
While composing a message, press <Options>
to access the following options:
• Input: enter the message text.
• Add: add an image, video, or sound clip.
• Send: send the message.
• Preview: view the message as it will be
shown on the recipient’s phone.
• Input method: change the text input
mode.
• Input language: change the language to
be used in T9 input mode.
60
• Insert text template: insert a text
template.
• Add name card: attach a Contacts entry as
a name card.
• Add v-calendar: attach calendar data as a
data format attachment.
• Attached file list: access the list of files
you have attached.
• Save to Drafts: save the message in the
Drafts folder.
• Add page: add pages. Move to each page
by pressing [Left] or [Right].
• Move page: move the current page
backward or forward to change the page
order.
• Delete page: delete a page.
• Edit style: change the page properties.
This page: set the page duration and
change font colour and style for the selected
page.
Use this menu to send multiple media files by
attaching them to an MMS message.
Creating and sending an MMS message
with files
1. Enter the message subject.
You can use various options by pressing
<Options> in each field.next section
Move to the Message field.
Enter the message text.
Move to the Attach files line.
Press <Options> and select Add files, Add
name card, or Add v-calendar.
6. Select images, videos, sounds, name cards,
or calendar data.
7. Press <Options> and select Attach.
8. When you have finished, press [OK].
9. Enter a phone number or e-mail address.
To send the message to more than one
recipient, fill in additional destination fields.
10.Press [OK] to send the message.
Using options while composing an MMS
message with files
While composing a message, press <Options>
to access the following options:
• Send: send the message.
Messages (Menu 5)
File messenger (Menu 5.1.3)
2.
3.
4.
5.
Menu functions
All page: change the background colour and
page layout.
• Edit Text/Change file: edit the added text,
image, video, or sound clip.
• Delete text/Delete file: delete the added
text, image, video, or sound clip.
• Save as template: save the message as a
template in the Multimedia templates
folder.
61
Menu functions
• Input method: change the text input
mode.
• Input language: change the language to
be used in T9 input mode.
• Insert text template: insert a text
template.
• Insert: insert a text template, Contacts
entry, or bookmarked URL address.
• Attached file list: access the list of the files
you attached.
• Add files: attach images, videos, or sounds.
• Add name card: attach a Contacts entry as
a name card.
• Add v-calendar: attach calendar data as a
data format attachment.
• Delete all attachments: delete all
attachments.
• Save to Drafts: save the message in the
Drafts folder.
62
Email (Menu 5.1.4)
You can send and receive e-mails that include
text, audio, and images. To use this feature,
you need to subscribe to an e-mail service and
set up your e-mail account.p. 75
Creating and sending an e-mail
1. Enter the e-mail subject.
You can use various options by pressing
<Options> in each field.next section
Move to the Message field.
Enter the e-mail text.
Move to the Attach files line.
Press <Options> and select Add files, Add
name card, or Add v-calendar.
6. Select images, videos, sounds, name cards,
or calendar data.
7. Press <Options> and select Attach.
2.
3.
4.
5.
• Add files: add images, videos, or sounds.
• Add name card: attach a Contacts entry as
a name card.
• Add v-calendar: attach calendar data as a
data format attachment.
• Delete all attachments: delete all
attachments.
• Save to Drafts: save the e-mail in the
Drafts folder.
Menu functions
Messages (Menu 5)
8. When you have finished, press [OK].
9. Enter an e-mail address.
To send the e-mail to more than one
recipient, fill in additional destination fields.
10.Press [OK] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <Options>
to access the following options in each field:
• Send: send the message.
• Input method: change the text input
mode.
• Input language: change the language to
be used in T9 input mode.
• Insert text template: insert a text
template.
• Insert: insert a text template, Contacts
entry, or bookmarked URL address.
• Attached file list: access the file list you
attached.
Inbox (Menu 5.2)
This folder stores all types of messages you
have received, except for e-mails.
Viewing a message
The following icons may appear on the list to
show the message type:
•
SMS message
•
MMS message
63
Menu functions
•
•
•
•
MMS notification
Push message from web servers
Configuration message, containing
network parameters from your service
provider
USIM/SIM
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Using message options
While viewing a message, press <Options> to
access the following options:
SMS messages
• Call/Go to URL/Go to RTSP: dial the
highlighted phone number or access the
highlighted web link.
64
• Add to bookmarks: save the highlighted
web link to the bookmark list.
• Create email: send an e-mail to the
highlighted e-mail address.
• Create multimedia message: send an
MMS message to the highlighted phone
number or e-mail address.
• Reply: reply to the sender via SMS, MMS, or
File messenger.
• Forward: forward the message to other
people.
• Call back: dial the phone number of the
sender.
• Save to Contacts: save the sender’s phone
number to Contacts. If a phone number, email address, or URL address within the
message is selected, you can also save it to
Contacts.
Messages (Menu 5)
MMS messages
• Call/Go to URL/Go to RTSP: dial the
highlighted phone number or access the
highlighted web link.
• Add to bookmarks: save the highlighted
web link to the bookmark list.
• Create email: send an e-mail to the
highlighted e-mail address.
• Create multimedia message: send an
MMS message to the highlighted phone
number or e-mail address.
• Play: play the message.
• Reply: reply to the sender via SMS, MMS, or
File messenger.
• Reply to all: send a reply to the sender and
all recipients.
• Forward: forward the message to other
people.
• Call back: dial the phone number of the
sender.
• Save as template: save the message as a
template in the Multimedia templates
folder.
• Save files: save media items from the
message into your phone’s memory or a
memory card.
• Save to Contacts: save the sender’s phone
number to Contacts. If a phone number, email address, or URL address within the
message is selected, you can also save it to
Contacts.
Menu functions
• Move to SIM/Move to phone: move the
message between the phone’s memory and
the USIM/SIM card.
• Print via Bluetooth: print the message via
a Bluetooth-compatible printer. Some
printers may not be compatible with the
phone.
• Delete: delete the message.
65
Menu functions
• Print via Bluetooth: print the message via
a Bluetooth-compatible printer. Some
printers may not be compatible with the
phone.
• Delete: delete the message.
• Details: access the message properties.
• Save to Contacts: save the sender’s phone
number to Contacts. If a phone number, email address, or URL address within the
message is selected, you can also save it to
Contacts.
• Delete: delete the report.
Push messages
• Go to URL/Go to RTSP: connect to the URL
specified in the message.
• Delete: delete the message.
Drafts (Menu 5.3)
Configuration messages
• Install: apply the configuration value in the
message to your phone.
• Delete: delete the message.
Delivery reports
• Call back: dial the phone number of the
sender.
66
This folder stores messages you have saved to
send them at a later time.
From the message list, press <Options> to
access the following options:
• View: open the selected message.
• Edit: edit the selected message.
• Send: send the message.
• Sort by: change the sort order of the
message list.
• Delete: delete the selected message.
• Delete all: delete all messages.
• Details: access the message properties.
This folder stores messages that the phone is
attempting to send or has failed to send.
The following icons on the message list
indicates the sending status:
•
Being sent
•
Failed to be sent
From the message list, press <Options> to
access the following options:
• View: open the selected message.
• Send again: resend the message.
• Edit: edit the message.
• Cancel sending: cancel sending the
message.
• Sort by: change the sort order of the
message list.
• Delete: delete the selected message.
• Delete all: delete all messages.
Sent box (Menu 5.5)
Menu functions
Outbox (Menu 5.4)
Messages (Menu 5)
This folder stores messages that you have sent.
From the message list, press <Options> to
access the following options:
• View: open the selected message.
• Forward: forward the message to other
people.
• Sort by: change the sort order of the
message list.
• Delete: delete the selected message.
• Delete all: delete all messages.
• Details: access the message properties.
Email inbox (Menu 5.6)
This folder stores e-mails that you have
received.
67
Menu functions
Viewing received e-mails
1. Press <Options> and select Download.
The phone checks the e-mail server and
downloads new e-mails.
2. Select an e-mail or a header.
3. If the e-mail has more than one page, press
[ / ] to scroll through pages one by one.
4. Select an attached file to view or play it.
Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
Using e-mail options
While viewing the e-mail or header, press
<Options> to access the following options:
• View: open the selected e-mail.
• Retrieve: retrieve the body of the selected
e-mail header from the e-mail server.
68
• Reply: send a reply to the sender.
• Reply to all: send a reply to the sender and
all recipients.
• Forward: forward the e-mail to other
people.
• Download: download new e-mails or
headers from the e-mail server.
• Sort by: change the sort order of the e-mail
list.
• Save files: save the selected file.
• Save to Contacts: extract phone numbers
or e-mail addresses from the e-mail and
save them in Contacts.
• Block: add the sender’s e-mail address or email subject to the Block list to reject e-mails
from that address or containing that subject.
• Delete from phone: delete the selected email or all e-mails from the phone’s memory.
Use this menu to create, edit, and send SMS
templates and MMS templates.
Text templates (Menu 5.7.1)
You can create SMS templates with the
sentences you use frequently so that you can
retrieve and insert them when composing an
SMS message.
1. Press <New>, or press <Options> and
select New, if one has been already stored.
2. Enter a message and press [OK].
Using template options
From the template list, press <Options> to
access the following options:
• Send: create and send a new message using
the template via SMS, MMS, File messenger,
or e-mail.
• New: add a new template.
• Edit: change the selected template.
• Delete: delete the selected template.
• Delete all: delete all templates.
Messages (Menu 5)
Templates (Menu 5.7)
Creating a template
Menu functions
• Delete permanently: delete the selected
e-mail or all e-mails from both the phone’s
memory and the e-mail server.
• Email accounts: change the active e-mail
account.
• Print via Bluetooth: print the e-mail via a
Bluetooth-compatible printer. Some printers
may not be compatible with the phone.
• Details: access the e-mail properties.
Multimedia templates (Menu 5.7.2)
You can create MMS templates so that you can
use them in composing an MMS message.
69
Menu functions
Creating a template
Broadcast (Menu 5.8)
1. Press <New>, or press <Options> and
select New, if one has been already stored.
2. Create a template as you would when
creating an MMS message.
3. Press <Options> and select Save as
template to save the template.
Your phone receives broadcast messages, which
are text messages related to various topics,
such as weather forecast, traffic, and news
report, from networks. Use this menu to access
received broadcast messages.
Using template options
From the template list, press <Options> to
access the following options:
• View: open the selected template.
• Send: send the selected template via MMS.
• New: add a new template.
• Edit: edit the selected template.
• Delete: delete the selected template.
• Delete all: delete all templates.
70
Viewing a broadcast message
All broadcast messages are stored in the
Temporary folder and will be deleted after a
period of time. If you do not want a message to
be deleted, save it to the Archive folder. While
viewing the message, press <Options> and
select Save.
Using message options
While viewing a message, press <Options> to
access the following options:
• Call/Go to URL/Go to RTSP: dial the
highlighted phone number or access the
highlighted web link.
Delete all (Menu 5.9)
1. Press [OK] to select the message types to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Settings (Menu 5.0)
Use this menu to set up various options for
using messaging services.
You can configure SMS settings.
• Settings x: set the properties of each
profile:
Centre address: store or change the
number of your SMS server.
Expiration: set the length of time your
messages are stored in the SMS server.
Default type: set the default message type.
The network can convert messages into the
selected format.
Name: enter a profile name.
• Sending settings: set up the options for
sending SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery report: set the network to inform
you when your messages are delivered.
Messages (Menu 5)
Use this menu to delete messages in each
message type at once.
Text message (Menu 5.0.1)
Menu functions
• Create email: send an e-mail to the
highlighted e-mail address.
• Save: save the message in the Archive
folder.
• Delete: delete the message.
71
Menu functions
Network selection: select CS preferred
(GSM) or PS preferred (GPRS), depending
on your network.
Keep a copy: leave copies of your
messages in the Sent box folder after
sending.
Character support: select a character
encoding type. When you select Automatic,
the phone switches the encoding type from
GSM alphabet to Unicode if you enter an
Unicode character. Use of Unicode encoding
will reduce the maximum number of
characters in a message to about half. If this
menu is not shown, your phone provides the
automatic character encoding by default.
Multimedia message (Menu 5.0.2)
You can configure MMS settings.
• Sending options: set up the options for
sending MMS messages:
72
Priority: set the priority level of messages.
Expiration: set the length of time messages
are stored in the MMS server.
Custom time(Hour): enter the length of
time you want if you select Custom time in
the Expiration option.
Delivery: set a time delay before messages
are sent.
Custom time(Hour): enter the length of
time you want if you select Custom time in
the Delivery option.
Hide address: set your address to be
hidden from the recipient’s phone.
Request delivery report: set the network
to inform you when your messages have
been delivered.
Request read report: send a read-replay
request along with your messages.
- Auto download: the phone automatically
retrieves messages from the server.
- Manual: the phone receives notifications
first from the server. Use the Retrieve
option to manually retrieve new messages.
- Restricted: (Roaming network only) the
phone receives notifications first from the
server. When you attempt to retrieve new
messages, the phone informs you of
additional charges.
- Reject: the phone rejects all messages.
Send delivery report: set the network to
inform the sender when a message has been
delivered to you.
Send read report: determine whether or
not the phone sends a read-reply when an
incoming message has been read.
Reject anonymous: reject messages from
unknown senders.
Menu functions
Messages (Menu 5)
Keep a copy: leave copies of your
messages in the Sent box folder after
sending.
Add my name card: allow your contact
information to be attached to your messages
via File messenger.
Add signature: allow your signature to be
attached to your message via File
messenger.
Input signature: enter your signature.
• Receiving options: set up the options for
receiving MMS messages:
Home network: determine if your phone
retrieves new messages automatically when
you are in your home service area.
Roaming network: determine if your
phone retrieves new messages automatically
when you are roaming in another network.
Reception within your home network or while
roaming has the following options:
73
Menu functions
•
•
•
•
74
Reject advertisement: reject
advertisements.
MMS profiles: select a connection profile to
be used for MMS. You can also create or edit
a profile.p. 124
Message size: select a maximum file size of
allowed for messages. Available message
size may vary, depending on your country.
Creation mode: select an MMS creation
mode:
Free: you can create a message with any
type of content and of any size.
Restricted: you can create a message with
any type of contents and size.
Warning: you can create a message with
any type of content and of any size, but the
phone will inform you when the content and
size exceed the maximum.
Slide interval: select the length of time the
display shows each page in a message.
Email (Menu 5.0.3)
You can configure e-mail settings.
You cannot change e-mail profile settings while
an e-mail is being sent or retrieved.
• Sending options: set up the options for
sending e-mails:
From: set the sender name.
Sending account: select the default
account.
Priority: select the priority level of e-mails.
Keep a copy: leave copies of your e-mails
in the Sent box folder after sending.
Include body when replying: set whether
or not the phone includes the original e-mail
text in a reply.
Delivery report: set the network to inform
you when your e-mails are delivered.
Block subject: specify subjects to reject emails which contain those subjects you
specify, and activate or deactivate mail
blocking.
• Email profiles: select a network connection
profile to be used for e-mail services. You
can also create or edit a profile.p. 124
• Email accounts: set up an e-mail account
and select an account to be used. Press
<Options> and select Edit to access the
following options for setting up an account:
Account name: enter a name for the
currently selected account.
SMTP server: enter the IP address or host
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Use SSL: activate the use of the SSL
(Secure Sockets Layer) protocol.
Menu functions
Messages (Menu 5)
Add my name card: allow your contact
information to be attached to e-mails.
Add signature: attach your signature to
e-mails.
Input signature: enter your signature.
• Receiving options: set up the options for
receiving e-mails:
Set download limit: determine the
maximum size for incoming e-mails. Your
phone will reject e-mails that exceed the
specified size.
Auto polling: set the phone to
automatically check the e-mail server to
download e-mails at the specified intervals.
Polling frequency: set how often the
phone checks the e-mail server for
automatic polling.
Block address: specify e-mail addresses to
reject e-mails from those addresses, and
activate or deactivate mail blocking.
75
Menu functions
Retrieving server type: select the protocol
for the incoming e-mail server. The
remaining options depend on the protocol
type setting.
POP3 server/IMAP4 server: enter the IP
address or host name of the POP3 or IMAP4
server.
POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
Use SSL: activate the use of the SSL
(Secure Sockets Layer) protocol.
IMAP4 retrieving option: (IMAP4 protocol
only) set whether the phone retrieves only
new messages or all messages.
Retrieving option: set wether the phone
downloads e-mail headers only or the
complete e-mail.
Keep in server: leave the copies of e-mails
on the e-mail server after retrieving.
My Address: set your e-mail address.
76
User name: enter the POP3 or IMAP4 user
name.
Password: enter the POP3 or IMAP4
password.
Use SMTP Authentication: enable SMTP
authentication, which requires the user to
log in before sending e-mails.
Same as POP3/IMAP4: select if you want
the SMTP server to have the same
parameters as the POP3 or IMAP4 server.
User name: enter the SMTP user name.
Password: enter the SMTP password.
Voice mail (Menu 5.0.4)
Use this menu to set the number of your
voicemail server.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
Memory status (Menu 5.*)
You can change the settings for receiving push
messages from the wireless web server.
• Receiving option: set whether or not to
receive push messages from the web server.
• Service loading: whether or not your
phone automatically launches the web
browser as a push message comes in.
Use this menu to view the number of messages
or the amount of memory currently in use for
each message type in each folder.
You can change the settings for receiving
broadcast messages.
• Receive: select whether or not the phone
receives broadcast messages.
• Channel: indicate the channels from which
you wish to receive broadcast messages.
Please contact your service provider for
further details.
• Language: select the preferred languages
in which broadcast messages display.
(Menu 6)
The File manager menu allows you to access
images, videos, music files, and sounds stored
in the phone’s memory or on a memory card.
To access this menu, press [OK] in Idle mode
and select File manager.
File manager (Menu 6)
Broadcast (Menu 5.0.6)
File manager
Menu functions
Push message (Menu 5.0.5)
Tips for Digital Rights Management
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by MMS
may require a licence key to access them. You
can acquire the key from the website which
owns the rights to the content; use the
Activate key option.
77
Menu functions
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
: Unforwardable item without a valid
key.
Your phone supports only count-based or
unlimited-access DRM files.
Viewing a slide show
Images
Editing an image
Use this menu to access photos you have taken
and images you have downloaded, received in
messages, or imported from your computer.
1. While viewing an image, press <Options>
and select Edit.
2. Press <Options> and edit the photo using
the following options:
• Save as: save the file as a different
name.
• Resize: change the image size.
• Effects: change the colour tone or apply
a special effect to the photo.
Viewing an image
1. Scroll to an image folder.
2. Select an image.
78
You can view your images as a slide show, a
sequential presentation of each image in the
current folder.
1. While viewing an image, press <Options>
and select Slide show.
The slide show begins.
2. Press <Back> to stop the slide show.
While viewing a file, press <Options> to
access the following options:
File manager (Menu 6)
Using image options
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Print via: print the image by connecting the
phone to a printer via USB or Bluetooth.
Some printers may not be compatible with
the phone.
• Hidden from Bluetooth/Visible to
Bluetooth: hide the file so that other
Bluetooth devices cannot access it, or share
the file with other Bluetooth devices.
• Set as: set the image as your wallpaper for
the displays or a caller ID image for a
Contacts entry.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Real size: view the image in its actual size.
Press <Phone size> to fit the image to the
display.
• Slide show: view all images as a slide
show.
Menu functions
• Adjust: adjust the brightness, contrast,
or colour balance.
• Frames: apply a decorative frame.
• Cliparts: add an image clip to the photo.
• Insert text: add text to the photo.
• Rotate: rotate the photo clockwise or
counterclockwise.
• Flip: flip the photo vertically or
horizontally.
• Crop: select a variously sized and shaped
section of the photo.
3. When you have finished, press <Done>, or
press <Options> and select <Done>.
4. Press [OK].
5. Enter a photo name and press <Save>.
79
Menu functions
80
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Edit: edit the image and save it as a
different file.
• Delete: delete the file.
• Rename: change the file name.
• Details: access the file properties.
• Key management: manage licence keys
you have acquired.
Videos
Downloading images
Using video options
1. Scroll to the Downloads folder.
2. Select More pictures. You are connected to
the website preset by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
From the video list, press <Options> to access
the following options:
• Play: play the video clip.
• Add to play list: add the file to the play list.
Use this menu to access video clips you have
recorded, downloaded, received in messages,
or imported from your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Scroll to a video folder.
2. Select a video clip. The media player opens.
p. 51
• Memory status: access the memory
information for each folder in File manager.
• Key management: manage licence keys
you have acquired.
Menu functions
Downloading video clips
1. Scroll to the Downloads folder.
2. Select More videos. You are connected to
the website preset by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
File manager (Menu 6)
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Hidden from Bluetooth/Visible to
Bluetooth: hide the file so that other
Bluetooth devices cannot access it, or share
the file with other Bluetooth devices.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Lock/Unlock: lock the file to prevent it from
being moved, deleted, and renamed, or
unlock the file.
• New folder: add a new folder.
• Details: access the file properties.
Music
This menu displays music files you have
downloaded or received in messages.
Playing a music file
Select a music file. The media player opens.
p. 51
81
Menu functions
Using music options
From the music list, press <Options> to access
the following options:
• Play: play the music file.
• Add to play list: add the file to the play list.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Hidden from Bluetooth/Visible to
Bluetooth: hide the file so that other
Bluetooth devices cannot access it, or share
the file with other Bluetooth devices.
• Set as ringtone: set the music file as your
ringtone for voice calls or video calls.
• Set as caller ID: set the music file as a
ringtone for a Contacts entry.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
82
•
•
•
•
•
•
•
•
•
Move: move the file to another folder.
Copy: copy the file to another folder.
Delete: delete the selected file or all files.
Rename: change the file name.
Lock/Unlock: lock the file to prevent it from
being moved, deleted, and renamed, or
unlock the file.
New folder: add a new folder.
Details: access the file properties.
Memory status: access the memory
information for each folder in File manager.
Key management: manage licence keys
you have acquired.
Downloading music files
1. Select More music. You are connected to
the website preset by your service provider.
2. Search for the file you want and follow the
onscreen instructions to download it.
Sounds
Playing a sound clip
Key
Function
Left
Returns to the previous file.
Right
Skips to the next file.
Function
Up/Down/
/
Adjusts the volume.
OK
Allows you to send the selected
file to other people.
Using sound options
File manager (Menu 6)
1. Scroll to a sound folder.
2. Select a sound clip. The selected sound
plays.
For a voice memo, see Voice recorder.
p. 109
During playback, use the following keys:
Key
Menu functions
Use this menu to access voice memos you have
recorded, and sound clips you have
downloaded, received in messages, or imported
from your computer.
From the sound list, press <Options> to
access the following options:
• Play: play the selected file.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Hidden from Bluetooth/Visible to
Bluetooth: hide the file so that other
Bluetooth devices cannot access it, or share
the file with other Bluetooth devices.
• Set as ringtone: set the sound clip as your
ringtone for voice calls or video calls.
83
Menu functions
• Set as caller ID: set the sound clip as a
ringtone for a Contacts entry.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Lock/Unlock: lock the file to prevent it from
being moved, deleted, and renamed, or
unlock the file.
• New folder: add a new folder.
• Details: access the file properties.
• Memory status: access memory
information for each folder in File manager.
84
• Key management: manage licence keys
you have acquired.
Downloading sound clips
1. Select More ringtones. You are connected
to the preset website by your service
provider.
2. Search for the file you want and follow the
onscreen instructions to download it.
Games & More
Use this menu to access the embedded Java
games and download Java applications.
Accessing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ
from game to game.
Using Java game options
• Lock/Unlock: lock the application to
prevent it from being deleted, moved, and
renamed, or unlock the application.
• Details: access the application properties.
• Key management: manage licence keys
you have acquired.
• New folder: add a new folder.
• Network settings: select a connection
profile to be used for applications requiring
network access. You can also create or edit a
profile.p. 124
• Memory status: access memory
information for each folder in File manager.
Menu functions
File manager (Menu 6)
From the application list, press <Options> to
access the following options:
• Download: connect to the preset website
and download applications.
• Play: launch the selected application.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactive key: get another licence key even
when the key for the selected DRM file has
not expired.
• Move: move the application to another
folder.
• Delete: delete the selected application or
game folder, except for embedded games
and default game folder.
• Rename: change the name of the
application or a created folder.
Downloading new games
1. Select More games. You are connected to
the website preset by your service provider.
2. Search for the application you want and
follow the onscreen instructions to download
it.
85
Menu functions
Other files
Use the following keys to view the document:
Use this menu to access any other files than
image, video, music and sound files. Your
phone provides you with Picsel File Viewer to
allow you to view, without corruption, various
document files. Available file formats are *.doc,
*. xls, *.ppt, *.pdf, *.html, and *.txt.
Key
Function
Up/Down/
Left/Right
Scrolls to each direction on the
current page.
/
OK
Fits the document to the page
size.
1
Searches backward through the
document for the text entered in
the Search option.
2
Returns to the first page.
3
Searches forward through the
document for the text entered in
the Search option.
4
Returns to the previous page.
Viewing a document
Select a file. Picsel File Viewer runs and opens
the document.
• Depending on the file size or memory
capacity of Picsel File Viewer, some files may
not open properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the content
of the document will not display correctly.
86
Zooms in or out.
Function
5
Rotates the document.
6
Moves to the next page.
8
Moves to the last page.
Using document options
While viewing a document, press <Options> or
< > to access the following options:
• Full screen view/Normal view: view the
document on a full screen, or return to the
normal screen.
• Zoom: zoom in or out.
• Fit to screen: screen fit the document to
the page size, screen width, or screen
height.
File manager (Menu 6)
Changes the display to Full
screen view or Normal screen
view.
• Rotate: rotate the document.
• Go to: move to another page of the
document.
• Screen panning/Normal panning: change
the page scroll mode. You can scroll by
screen size or scrolling by preset pixel.
• Hide controller/Show controller: hide or
display the shortcut tool bar in Full screen
view.
• Search: search for text in the document.
• Send: send the file via e-mail or Bluetooth.
• Visible to Bluetooth/Hidden from
Bluetooth: hide the file so that other
Bluetooth devices cannot access it, or share
the file with other Bluetooth devices.
• Lock/Unlock: lock the file to protect it from
being moved, deleted, and renamed, or
unlock the file.
• Details: access the file properties.
Menu functions
Key
87
Menu functions
• FileViewer shortcuts: view the functions
of the keys you can use in Picsel File Viewer.
Memory card
Use this menu to access the files stored on the
memory card. This option is only available when
you insert a memory card into the phone.
For details about using files, see the
corresponding menu.
Organiser
(Menu 7)
The Organiser feature enables you to keep
track of your schedule.
To access this menu, press [OK] in Idle mode
and select Organiser.
Calendar (Menu 7.1)
Use this menu to keep track of your schedule.
88
Selecting a day on the calendar
When you enter the Calendar menu, the
calendar appears with today’s date indicated by
a blue box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Creating an item
You can store scheduled items, anniversaries,
tasks, and memos on the calendar. More than
one item per day can be stored.
Entering a scheduled item
1. Select a date on the calendar.
2. Press <Options> and select New →
Schedule.
3. Enter information or change the settings:
• Title: enter the title for the scheduled
item.
Entering an anniversary
89
Organiser (Menu 7)
1. Select a date on the calendar.
2. Press <Options> and select New →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: set an alarm for the anniversary.
• before: set how long before the
anniversary the alarm is to alert you.
• alarm time: enter the time for the alarm
to sound.
• Repeat every year: set the phone to
remind you of the anniversary every year.
4. Press <Options> and select Save to save
the anniversary.
Menu functions
• Details: enter the details of the
scheduled item.
• Start and End: enter the starting and
ending times for the scheduled item.
• Start date and End date: enter the
starting and ending dates for the
scheduled item.
• Location: enter information about the
scheduled item.
• Alarm: set an alarm for the scheduled
item.
• before: set how long before the
scheduled item the alarm is to alert you.
• Repeat: set the scheduled item to recur.
You can select a repeat unit.
• until: set the ending date, if the
scheduled item will recur.
• Expiry: change the expiry setting.
4. Press <Options> and select Save to save
the scheduled item.
Menu functions
Entering a task
Consulting the calendar
1. Select a date on the calendar.
2. Press <Options> and select New → Task.
3. Enter information or change the settings:
• Title: enter the title for the task.
• Task: enter the task content.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Options> and select Save to save
the task.
Once you have scheduled items, the square
brackets appear on the corner of the date cell.
Viewing an item
Entering a memo
1.
2.
3.
4.
5.
90
Select a date on the calendar.
Press <Options> and select New → Memo.
Enter the memo text and press [Down].
Enter the date.
Press <Options> and select Save to save
the memo.
1. Select a date on the calendar to display the
items for the day. The following icons
indicate the type of item:
•
Scheduled items
•
Anniversaries
•
Tasks
•
Memos
2. Select an item to view its details.
From the item list, press <Options> to access
the following options:
• View: access the item.
• New: add a new item.
• Completed/To do: change the status of the
selected task.
Organiser (Menu 7)
Using calendar options
On the calendar, press <Options> to access
the following options:
• View: display the items stored for the
selected date.
• New: add a new item.
• Week view: display the weekly view
screen.
• Go to today: go to today’s date.
• Go to date: enter a specific date.
• Start date: set whether the calendar starts
with Sunday or Monday.
• Delete: delete the items for the specific
period.
• Delete all: delete all of the items in the
calendar.
Menu functions
• Month view: switch to the monthly view
screen.
• Week view: switch to the weekly view
screen.
• Change date/Change due date/
Reschedule: change the date of the item.
• Delete: delete the selected item.
• Delete all: delete all of the items for the
selected day.
• Send schedule/Send task: send the item
via SMS, MMS, e-mail, File messenger, or
Bluetooth.
• Send memo: send the memo via SMS.
• Print via Bluetooth: print the item via a
Bluetooth-compatible printer. Some printers
may not be compatible with the phone.
Week view (Menu 7.2)
You can view items for the selected week. A call
on the timetable indicates the presence of a
scheduled item. Select a cell for the date you
want.
91
Menu functions
Today’s events (Menu 7.3)
Task (Menu 7.6)
You can view items for the selected date.
Select an item to view its details. The item
opens in Edit mode.
Use this menu to display tasks you have
created. The icons on the right indicate the
importance; the lower the number on the icon,
the higher the priority. A check mark appears in
the status check box if the task has been
completed.
Select a task to view its details.
Schedule (Menu 7.4)
This menu displays the scheduled items. If you
have set the Repeat and Alarm options, the
and
icons display.
Select a scheduled item to view its details.
Anniversary (Menu 7.5)
This menu displays anniversaries you have
created. If you have set the Repeat and Alarm
options, the
and
icons display.
Select an anniversary to view its details.
92
Memo (Menu 7.7)
This menu displays memos you have created.
Select a memo to view its details.
Missed event alarm (Menu 7.8)
Camera
When you are unable to acknowledge an alarm
for an item, the phone stores the missed alarm
until you confirm it.
You can use the camera module embedded in
your phone to take photos and record videos.
To access this menu, press [OK] in Idle mode
and select Camera, or press and hold [ ].
This menu displays the number of items of each
type you have created, and the total number of
items you can store.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Camera (Menu 8)
Memory status (Menu 7.9)
Menu functions
1. Select an item.
2. Press <Confirm> to confirm and delete the
item.
(Menu 8)
Taking a photo
You can take photos in various modes. The
camera produces JPEG photos.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
93
Menu functions
Taking a photo with the phone open
1. Access the Camera menu to turn on the
camera. You can also press and hold [ ] in
Idle mode.
2. Press [ ] to switch between the interior
camera lens below the display and the
exterior camera lens on the external of the
phone.
3. Make any desired adjustments.
• Press < > to use camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 96
94
4. Press [OK] to take a photo. The photo is
saved in the Pictures folder.
5. To
Press
use photo options
<Options> or
< >.p. 97
delete the photo
[C] and then <Yes>.
send the photo via
MMS
[OK].p. 59
return to Capture
mode
<Back> or <
>.
Using camera options in Capture mode
• Effects: change the colour tone or apply a
special effect to the image.
• Frames: apply a decorative frame.
• Timer: set a time delay before the camera
takes a photo.
• Zoom/Hide zoom: display the zoom control
bar and zoom in or out by pressing [Up] or
[Down], or hide the control bar.
• Brightness/Hide brightness: display the
brightness control bar and adjust the
brightness by pressing [Left] or [Right], or
hide the control bar.
• Camera settings: change the default
settings for taking a photo:
Default name: change the default prefix of
file names.
Default storage: select the memory
location to store photos, if a memory card is
inserted.
Menu functions
Camera (Menu 8)
In Capture mode, press <
> to access the
following options:
• Take photo: take a photo.
• Record video: switch to Record mode.
• Switch camera: switch between the interior
camera lens and the exterior camera lens.
• Go to Photos: access the Pictures folder.
• Shooting mode: take a photo in the
following modes:
Single shot: take a photo in Normal mode.
You can select whether or not the camera
automatically saves a photo.
Multi shot: take a series of action stills. You
can select the number of photos the camera
will take.
Mosaic shot: take several stills and save
them in one frame. You can select the
layout. Press [OK] to take each photo.
95
Menu functions
Viewfinder: select a preview screen.
Focus mode: select a focus mode. You may
hear a focusing sound in Auto focus mode.
Shutter sound: select the sound that you
hear when you press the shutter release key.
Capture quality: select an image quality.
Image size: select an image size.
Multi shot speed: select the shooting
speed in Multi Shot mode.
Spot metering: adjust the exposure based
on a specific area of the image. Select On to
display the spot focus frame in the middle of
the image, and change the exposure
according to the brightness of the image
fragment in the frame.
White balance: adjust the colour balance of
the photo. You can make your photo appear
warmer or cooler.
• Camera shortcuts: view the functions of
the keys you can use in Capture mode.
96
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Key
Function
Left/Right Adjusts the brightness.
Up/Down
Zooms in or out. (Not available for
the maximum size)
Flips the image vertically.
Shows the mirror image.
1
Switches to Record mode.p. 97
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or applies
a special effect.
7
Adds a decorative frame.
8
Sets the timer.
0
Goes to the Pictures folder.
• Delete: delete the file, or all of the multishot photos.
• Set as: set the photo as wallpaper for
displays, or as a caller ID image for a
Contacts entry.
• Go to Photos: access the Pictures folder.
p. 78
• Rename: change the file name.
Changes the preview screen.
Taking a photo with the phone closed
Using photo options
After saving a photo, press <Options> or
< > to access the following options:
• View: access one of the multi-shot photos.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Viewfinder: return to Capture mode.
Camera (Menu 8)
Function
Menu functions
Key
1. Press and hold [ ].
• Press [ ] to flip the image vertically.
• Press [ ] to view the mirror image.
2. Press [ ] to take a photo. The photo is
automatically saved.
Recording a video
You can record a video of what is displayed on
the camera screen and save it.
97
Menu functions
Recording a video
1. Access the Camera menu to turn on the
camera. You can also press and hold [ ] in
Idle mode.
2. Press [1] to switch to Record mode.
3. Press [ ] to switch between the interior
camera lens below the display and the
exterior camera lens on the external of the
phone.
4. Make any desired adjustments.
• Press < > to use camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 99
5. Press [OK] to start recording.
6. Press [OK] to stop recording. The video is
saved in the Videos folder.
98
7. To
use video options
Press
<Options>.p. 100
delete the video clip [C] and then <Yes>.
send the video clip
via MMS
[OK].p. 59
return to Record
mode
<Back>.
Using camera options in Record mode
In Record mode, press < > to access the
following options:
• Record: start recording.
• Take photo: switch to Capture mode.
• Switch camera: switch between the interior
camera lens and exterior camera lens.
• Go to Videos: access the Videos folder.
p. 80
Select Limit for MMS to record a video
suitable for an MMS message.
Select Normal to record a video within the
limit of the currently available memory. The
length of your video is determined by how
much memory has been used.
Size: select a frame size.
Audio record: turn the audio on or off.
• Camcorder shortcuts: view the functions
of the keys you can use in Record mode.
Menu functions
Camera (Menu 8)
• Effects: change the colour tone or apply a
special effect to the image.
• Zoom/Hide zoom: display the zoom control
bar and zoom in or out by pressing [Up] or
[Down], or hide the control bar.
• Brightness/Hide brightness: display the
brightness control bar and adjust the
brightness by pressing [Left] or [Right], or
hide the control bar.
• Video settings: change the following
settings for recording a video:
Default name: change the default prefix of
file names.
Default storage: select the memory
location to store video clips, if a memory
card is inserted.
Quality: select an image quality.
Recording time: select a video recording
mode.
Using the keypad in Record mode
You can use the keypad to customise your
camera settings in Record mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
99
Menu functions
Key
Function
Shows the mirror image.
100
1
Switches to Capture mode.
p. 93
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording
mode.
5
Changes the colour tone or
applies a special effect.
7
Mutes or unmutes audio.
0
Goes to the Videos folder.
Using video options
After saving a video clip, press <Options> to
access the following options:
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Play: play back the file.
• Viewfinder: return to Record mode.
• Delete: delete the file.
• Go to Videos: access the Videos folder.
p. 80
• Rename: change the file name.
Bluetooth
(Menu 9)
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the
Bluetooth feature.
• My devices: search for connectable
Bluetooth devices.
• My phone’s visibility: allow other
Bluetooth devices to locate to your phone, or
not.
• My phone’s name: assign a Bluetooth
device name to your phone, which is then
displayed on other devices.
• Secure mode: determine if the phone asks
for your confirmation when other devices
access your data.
Bluetooth (Menu 9)
• If there are obstacles between the devices,
the operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
media player, or vice versa, for the better
performance.
• Some devices, especially those that are not
tested or approved by SIG, may be
incompatible with your phone.
To access this menu, press [OK] in Idle mode
and select Bluetooth.
Menu functions
Using Bluetooth wireless, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they
do not need to be in line of sight to each other.
101
Menu functions
• Bluetooth service: display available
Bluetooth services.
Searching for and pairing with a
Bluetooth device
1. From the Bluetooth menu, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you
can connect displays. The following icons
indicate the type of device:
•
Hands-free car kit or headset
•
Mobile phone
•
Computer
•
PDA
•
Unknown device
•
Printer
102
The colour of the icon indicates the status of
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This
code is used just once and you do not need
to memorise it.
When the owner of the other device enters
the same code, pairing is complete.
Some devices, especially headsets or handsfree car kits, may have a fixed Bluetooth PIN,
such as 0000. If the other device has one, you
must enter the code.
1. Activate the Bluetooth feature.
2. Select the application in which the item you
want to send is stored.
3. Scroll to the item you want and press
<Options>.
4. Select Send name card/Send/Send
schedule/Send task → Via bluetooth.
5. Select Search new device.
The phone searches for devices within range
and displays a list of available devices.
6. Select a device.
7. If necessary, enter the Bluetooth PIN needed
for pairing and press <OK>.
Bluetooth (Menu 9)
Sending data via Bluetooth
From the device list, press <Options> to
access the following options:
• Connect: connect to a headset or handsfree car kit.
• Disconnect: end the connection with the
connected device.
• Browse device: search for data from the
device and import data directly to your
phone.
• Service list: access the Bluetooth service
list of the device.
• Authorise device/Unauthorise device:
determine whether or not the phone asks
you to permit connection when other devices
try to connect to your phone.
• Delete: remove the selected device or all
devices from the list.
• Rename: rename the selected device.
Menu functions
Using device options
103
Menu functions
Receiving data via Bluetooth
SIM AT (Menu *.1)
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
This menu is available if you use a USIM/SIM
card that supports SIM Application Toolkit
menus and provides additional services, such as
news, weather, sports, entertainment, and
location services. Available services may vary,
depending on your service provider’s plans.
For details, see your USIM/SIM card instructions
or contact your service provider.
1. If an unauthorised Bluetooth device sends
data to your phone, press <Yes> to allow
the device to access your phone.
2. Press <Yes> to receive data.
Applications
(Menu *)
You can use convenient features, such as a
voice recorder, world clock, calculator, and
converter. You can also have your own cyber
pet and view a tube map.
To access this menu, press [OK] in Idle mode
and select Applications.
104
mPet (Menu *.2)
You can select and adopt your own cyber dogs.
Help them grow up by feeding and playing with
them just as you would in real life. You can also
train your dogs, and let it have a puppy with
another mPet user’s dog.
When you access the mPet menu, the phone
displays an icon indicating how your dog is
feeling, its current need, or his physical
condition on the bottom line of the display. Take
care of your pet accordingly. Depending on the
icon, it may not obey your commands.
•
Happy
•
Hungry
•
Angry
•
Calm
•
Tired
•
Sick
Select a location where you want to play with
your dog by pressing <Options> and selecting
Location. For each location, you can do various
activities with your dog.
You can adopt a dog that other people have
raised by receiving a dog adopting message via
SMS. When you receive a message, select
<Yes>. The dog is stored in the Pet Inventory
folder.
Applications (Menu *)
Taking care of your dog
1. Press <Yes> to adopt a new dog.
2. Scroll to the dog you want by pressing [Left]
or [Right].
You can make the dog walk or turn by
pressing <Options> and selecting Animate
or Turn.
3. Press [OK].
4. Enter the name of the dog and press
<Save>.
5. Press <Yes> to adopt the dog.
Menu functions
Adopting a dog
105
Menu functions
Your pet may refuse to participate in an activity
due to its current state. For example, if your
dog is sick, it may refuse to eat until you help it
feel better.
Garden
Activity
Instructions
DING DONG Press [1] or go to the musical
game
notes. Imitate the notes your
dog plays by pressing the same
numbers, in the same order.
After playing, your dog gets a
snack.
Going to
living room
Instructions
STANGA
game
Press [4] or go to the ball. Using
the Navigation keys, hit the balls
with the paddle. After playing,
your dog gets a snack.
Going out
Press [5] or go to the gate. You
can send your dog to meet a dog
friend for visiting, racing, or
creating a new puppy to another
phone that has the mPet feature.
After meeting a dog friend, you
get a decorative item for your
dog.
Press [2] or go to the front door.
Garden walk Press [3] or go to the flowers.
Your dog plays with a butterfly or
bird.
106
Activity
Living room
Activity
Instructions
Going to the Press [1] or go to the door.
garden
Decorations
Press [3] or go to the closet.
Decorate your dog with
decorations, such as a bow tie,
hairpin, or medal.
Activity
Instructions
Going to the Press [1] or go to the entrance
living room of the living room.
Going to the Press [2] or go to the door.
bedroom
Feeding
Press [3] or go to the food bowl
to feed your dog.
Today’s
saying
Press [4] or go to the cards to
view today’s saying.
Instructions
Snacks
Press [5] or go to the snack tray
to give snacks to your dog.
Bedroom
Activity
Instructions
Going to the Press [1] or go to the door.
kitchen
Cleaning
Press [2] or go to the cleaning
basket to give your dog a good
cleaning.
Bedtime
Press [3] or go to the doghouse
to let your dog sleep.
Healing
Press [4] or go to the shot to
help your dog heal.
Applications (Menu *)
Kitchen
Activity
Menu functions
Going to the Press [2] or go to the entrance
kitchen
of the kitchen.
107
Menu functions
Using various options
On the location screen, press <Options> to
access the following options:
• Train: train your dog.
• Commend: praise your dog or pet it if it is
behaving well.
• Discipline: warn or punish your dog if it
behaving bad.
• Location: select a location in which you
want to play with your dog.
• Pet Inventory: view the dogs you have
adopted. Press <Options> to access the
following options:
View Status: check the status of the
selected dog.
Rename: rename your dog.
Say Goodbye: give the selected dog to
another person or say farewell to your dog.
108
•
•
•
•
Adopt New Pet: adopt a new dog. You can
adopt up to 5 dogs.
Pick: make the selected dog your active pet.
Pet Status: view all influencing factors of
your pet’s well being, and use it to indicate
how to best take care of your dog.
Family Tree: view a family tree for dogs
created on your phone.
Settings: access the following:
Sound: select if the phone uses sounds or
vibration when you play with your dog.
Navigation: select a navigation type,
Shortcut mode or Walking mode.
Help: view the help screen for using the
mPet feature.
Training your dog
1. On the location screen, press <Options>
and select Train.
Voice recorder (Menu *.3)
Playing a voice memo
1. From the voice recorder screen, press
<Options> and select Go to sounds.
2. Select a voice memo from the Voice
memos folder. The memo plays.
During playback, use the following keys:
Key
Function
OK
Pauses or resumes playback.
Recording a voice memo
Left
Moves backward in a file.
1. Press [OK] to start recording.
2. Speak into the microphone.
Press [OK] to pause or resume the
recording.
3. Press <Stop> or [Down]. The voice memo is
saved automatically.
4. Press [OK] to review the memo, or press
[Up] to record additional memos.
Right
/
Down
Applications (Menu *)
Use this menu to record voice memos. A voice
memo can be up to one hour long.
Menu functions
2. Select a command to train your dog.
Depending on the dog’s age, you can train it
to sit, roll, turn, bark, or give paw. Repeat
commands multiple times until the pet
learns the trick.
Skips forward in a file.
Adjusts the volume.
Stops playback.
109
Menu functions
Using voice recorder options
After playback, press <Options> to access the
following options:
• Play: play the selected voice memo in
Review mode.
• Record: record a new voice memo.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Set as ringtone: set the file as your
ringtone for voice calls or video calls.
• Set as caller ID: set the file as a ringtone
for a Contacts entry.
• Key management: manage licence keys
you have acquired.
110
Go to sounds: access the voice memo list.
Delete: delete the file.
Rename: change the file name.
Visible to Bluetooth/Hidden from
Bluetooth: share the file so that other
Bluetooth devices cannot access it, or hide
the file with other Bluetooth devices.
• Details: access the file properties.
• Record settings: customise the default
settings for the voice recorder:
Default name: change the default prefix of
file names.
Recording time: select a maximum
recording time.
•
•
•
•
Applying daylight saving time
Use this menu to set your local time zone and
find out the current time in another part of the
world.
1. From the world map, press <Options> and
select Summer time.
2. Press [OK] to select the time zones you
want.
3. Press <Select>.
4. Press [OK] to save the time zone.
Setting the local time zone
Applications (Menu *)
1. From the world map, press [Left] or [Right]
to scroll to the city you want on the upper
line ( ). As the time line moves, the time
and date of the given zone display.
2. Press [OK] to save the city as your local time
zone.
Menu functions
World clock (Menu *.4)
Calculator (Menu *.5)
Viewing world time
Use this menu to perform basic arithmetic
functions such as addition, subtraction,
multiplication, and division.
Performing a calculation
1. From the world map, move to the lower line
(
).
2. Press [Left] or [Right] to scroll to the city
you want.
3. Press [OK] to save the time zone.
1. Enter the first number.
Press [ ] to include a decimal point.
2. Press one of the Navigation keys to access
the math function you want.
3. Enter the second number.
111
Menu functions
4. Press [OK] to view the result.
5. If necessary, repeat from step 2 to continue
the calculation.
Using calculator options
Press <Options> to access the following
options:
• Equal: view the result.
• Recent calculation: display the last result
you calculated.
• Save to memory: save a value into the
calculator memory.
• Recall memory: retrieve the saved value.
• Clear memory: clear the saved value.
Converter (Menu *.6)
Use this menu for common conversions, such
as currency and temperature.
112
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original
unit and press [Down].
3. Enter the value to be converted and press
[Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to
which you want to convert.
The equivalent value for the amount you
entered displays.
Using converter options
Press <Options> to access the following
options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Alert tone: select an alarm tone.
3. Press <Options> and select Save.
Alarms
Stopping an alarm
(Menu 0)
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Time: enter the time for the alarm to
sound.
• Repeat: select a repeat option.
When the time for an alarm comes and the
alarm sounds:
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <OK> or [OK].
Press <Snooze> to cause it to sound again
after 5 minutes.
Press any key, except for <OK> and [OK],
and <Snooze> to mute the alarm tone.
Alarms (Menu 0)
Use this menu to set alarms to sound at specific
times. The alert type for a normal alarm
corresponds to the call alert type settings in the
currently selected profile. A wake-up alarm is
not be affected by your profile setting.
To access this menu, press [OK] in Idle mode
and select Alarms.
Menu functions
• Currency rates: display the currency rate
list.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press [OK].
113
Menu functions
Setting alarms to sound when the
phone is off
From the Alarms screen, select Auto power →
On.
If the phone is off when it is time for the alarm
to sound, the phone switches on and sounds
the alarm.
Profiles (Menu #.1)
Your phone provides you with sound profiles
that allow you to quickly and easily change the
sound settings of the phone for different events
or situations. Use this menu to adjust the
properties of each profile and activate the
profile you need.
Editing a profile
Settings
(Menu #)
The Settings menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the
settings to their default status.
To access this menu, press [OK] in Idle mode
and select Settings.
114
1. Scroll to the profile you want.
2. Press <Options> and select Edit.
3. Change the sound settings:
• Call alert type: select an alert type for
the call ringer.
• Voice call ringtone: select a ringtone
for voice calls.
• Video call ringtone: select a ringtone
for video calls.
115
Settings (Menu #)
Minute minder: set the phone to beep
every minute during an outgoing call to
keep you informed of the length of your
call.
Call connect tone: set the phone to
beep when an outgoing call is connected
to the system.
Call end tone: set the phone to beep
when a call is disconnected by the other
person or due to a faded signal.
Alerts on call: set the phone to beep
when you receive a new message or when
the time for an alarm comes during a call.
• Key tones: select a tone which sounds
when you press a key.
• Key tone volume: adjust the volume of
the key tones.
• Call answer mode: (For Car) select how
to answer an incoming call.
Menu functions
• Tone volume: adjust the volume for the
call ringer.
• Message alert type: select an alert type
for the message ringer.
• Message alert tone: select a ringtone
for the message ringer.
• Message alert repetition: select if the
phone repeatedly reminds you of a new
message.
• Phone sounds: turn the various sounds
on the phone on or off:
All on: enable all tones.
Popup box alerts: set the phone to beep
when a pop-up window displays.
Power on/off: set the phone to beep
when you turn it on or off.
Folder open/close: set the phone to
sound when you open or close it.
Menu functions
4. When you have finished, press <Options>
and select Save.
Changing an active profile
From the profile list, select the profile you want.
Time & date (Menu #.2)
Use this menu to change the time and date
displayed on your phone. Before setting the
time and date, specify your time zone in the
World clock menu. p. 111
• Time: enter the current time. To select AM
or PM for 12-hour time format, press
[Right].
• Date: enter the current date.
• Time format: select a time format.
• Date format: select a date format.
• Summer time: select to apply daylight
saving time.
116
• Auto update: activate the auto time update
feature. Your phone will read the MCC
(Mobile Country Code) from the network and
automatically update the current time for the
country that you are in when you travel
abroad.
Time information may not be updated when
you move to one time zone to another within
a country.
Phone (Menu #.3)
Many different features of your phone’s system
can be customised to suit your preferences.
Language (Menu #.3.1)
Use this menu to select a language for the
display text or T9 input mode. If you select
Automatic, the phone uses the same language
as the USIM/SIM card.
Active folder (Menu #.3.3)
You can use the Navigation keys as shortcut
keys to access specific menus directly from Idle
mode. Use this menu to assign a shortcut to a
key.
Use this menu to answer incoming calls by
opening the phone.
Assigning a shortcut menu
Use this menu to answer an incoming call by
pressing any key, except for <Reject> and
[ ].
Using shortcut options
On the Shortcuts screen, press <Options> to
access the following options:
• Assign: assign a shortcut menu.
• Change: change a shortcut menu
assignment.
• Remove: deactivate the shortcut
assignment to the selected key.
• Remove all: deactivate all shortcut
assignments.
Anykey answer (Menu #.3.4)
Settings (Menu #)
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Menu functions
Shortcuts (Menu #.3.2)
Volume key (Menu #.3.5)
Use this menu to set whether the phone mutes
the call ringer or rejects a call if you press and
hold [ / ] when a call comes in.
Key management (Menu #.3.6)
Use this menu to manage the licence keys you
have acquired to activate media contents locked
by DRM systems.
117
Menu functions
Press <Options> to access the following
options:
• View: open the corresponding media item.
• Delete: delete the selected licence key.
• Go to My Messages: access the message
that contains the media content.
• Go to File manager: access the
corresponding file folder.
• Details: access the properties of the licence
key.
Cover keypad lock (Menu #.3.7)
Use this menu to lock the exposed keys to keep
accidental presses from affecting your phone’s
operation when the phone is closed.
Display (Menu #.4)
Use this menu to change settings for the
display.
Greeting message (Menu #.4.1)
Use this menu to enter the greeting that is
displayed briefly on the main display or external
display when the phone is switched on.
Wallpaper (Menu #.4.2)
You can change the background image that is
displayed on the main display. You can select
one of the images in the Images folder, or
create a photo slide of your favourite image.
Calendar (Menu #.4.3)
Use this menu to display the calendar of the
current month on the idle screen.
118
Cover LCD (Menu #.4.4)
Dialling display (Menu #.4.7)
LCD brightness (Menu #.4.5)
Main menu style (Menu #.4.8)
Use this menu to adjust the brightness of the
main display.
Use this menu to select a display style for the
main menu screen.
Backlight (Menu #.4.6)
Touch light (Menu #.4.9)
You can select the length of time the backlight
or display stays on.
• On: select the length of time the backlight
stays on in times of inactivity.
Use this menu to turn on or off the backlight of
the media player control keys.
Menu functions
• Dim: select the length of time the display
stays on in Dim mode after the backlight
turns off. After a specified time, the display
turns off.
Use this menu to select an image or enter text
to be displayed on the external display.
• Clock: select a clock type.
• Cover title: enter the text you want.
• Wallpaper: press <Change> and select an
image. If necessary, select the portion of the
image to be displayed.
Settings (Menu #)
Use this menu to customise the settings for the
numbers entered and the background colour of
the display while dialling.
119
Menu functions
Call (Menu #.5)
Use this menu to set options for call functions.
Caller ID (Menu #.5.1)
This network service allows you to hide your
phone number from the person you are calling.
If you select By network, the phone will use
the default setting provided by the network.
Some networks do not allow the user to change
this setting.
Diverting (Menu #.5.2)
This network service reroutes incoming calls to
a different phone number that you specify.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
• Always: divert all calls.
120
• Busy: divert calls when you are on
another call.
• No reply: divert calls when you do not
answer the phone.
• Unreachable: divert calls when you are
not in your service area or when your
phone is switched off.
• Cancel all: cancel all call diverting
options.
3. Enter the number to which the calls will be
diverted in the Divert to line.
4. If you selected No reply, move to the
Waiting time line and select the length of
time the network delays before diverting a
call.
5. Press <Options> and select Activate. To
deactivate the call diverting, select
Deactivate.
Barring (Menu #.5.3)
Settings (Menu #)
1. Select the type of calls to be barred.
2. Select a call barring option:
• All outgoing calls: prohibit all outgoing
calls.
• Outgoing int’l calls: prohibit
international calls.
• Int’l calls exc. home: only allow calls to
numbers within the current country when
you are abroad, and to your home
country.
• All incoming calls: prohibit incoming
calls.
• Incoming calls when roaming:
prohibit incoming calls when you use your
phone outside of your home service area.
• Cancel all: cancel all call barring
settings, allowing calls to be sent and
received normally.
3. Enter the call barring password supplied by
your service provider.
4. Press <Options> and select Activate. To
deactivate the call barring, select
Deactivate.
Menu functions
This network service allows you to restrict your
calls.
You can change the call barring password
obtained from your service provider. From the
call type list, press <Options> and select
Change password.
Waiting (Menu #.5.4)
This network service informs you when
someone is trying to reach you while you are on
another call.
1. Select the type of calls to which the call
waiting option will apply.
121
Menu functions
2. Press <Options> and select Activate. To
deactivate the call waiting, select
Deactivate.
Auto redial (Menu #.5.5)
Use this menu to make up to ten attempts to
redial a phone number after an unsuccessful
call.
Closed user group (Menu #.5.6)
Use this menu to set incoming and outgoing
calls to be restricted to a selected user group
(CUG). For details about how to create a closed
user group, contact your service provider.
• Use user group: activate CUG index
numbers.
• Outside access: enable calls to numbers
other than those in the Closed user group.
This feature depends on the nature of your
CUG subscription.
122
• Default group: enable the default CUG, if
you have set one with your service provider.
When making a call, you are given the option
of using your default CUG, instead of
selecting one from the list.
• Group index: add, delete, or activate CUG
index numbers.
Video call (Menu #.5.7)
Use this menu to change the default settings for
using the video call feature.
• Show me: change the video camera
settings for receipt of video calls:
Optionally: you can select whether or not
the video camera is used each time you
answer a video call.
Always: the camera is always used.
• Retry by: set what to do when a video call
does not connect:
Voice call: the phone retries with a voice
call.
Connectivity (Menu #.6)
Network (Menu #.6.1)
Use this menu to change the settings for
connecting to your cellular network.
• Network selection: select to either
manually select the network to be used
when roaming outside of your home area, or
to let the network be chosen automatically.
You can select a network other than your
home network only if there is a valid
roaming agreement between the two.
Settings (Menu #)
Use this menu to set options for connection
available on your phone.
• Network mode: select the network you
use:
Automatic: the phone scans for available
networks.
GSM 900/1800: the phone operates in the
combined GSM 900/1800 network.
GSM 1900: the phone operates in the GSM
1900 network. This option is only available in
the U.S.A.
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher
speed quality than on lower generation
networks, and use advanced data and
information services, such as video calls.
Menu functions
Multimedia message: the phone will turn
on the camera and switch to Record mode so
that you can record a video and send it as an
MMS message.
None: the phone does not retry.
Connections (Menu #.6.2)
Use this menu to create and customise the
profiles containing the settings for connecting
your phone to the network. You need these
settings to use the web browser or send MMS
messages or e-mails.
123
Menu functions
Your phone is set up by default for connecting to
the network. If you change the settings without
first checking with your service provider, the
web browser, MMS, and e-mail features may not
work properly.
Creating a profile
124
1. Press <Options> and select New.
2. Specify profile parameters:
• Set name: enter a profile name.
• Access name: edit the access point
name used for the address of the GPRS
network gateway.
• Auth type: choose the type of
authentication used.
• User ID: enter the user ID.
• Password: enter the user password.
• Protocol: select the protocol from among
WAP, HTTP, and Other.
• Home URL: enter the URL address of the
page to be used as your homepage.
• Gateway address: (WAP only) enter the
gateway address of the proxy server.
• Proxy address/Port: (HTTP only) set
the proxy server address and port.
• Secure connection: (WAP only) turn the
secure mode on or off.
• Linger time (sec.): set a time period
after which the network is disconnected if
there has been no new data traffic in that
time.
• Advanced settings: provide you with
the following options:
Static IP: specify if you want to manually
enter an IP address; see the Local
phone IP option. If you want the IP
address to be automatically assigned by
the server, remove the check mark.
Local phone IP: enter the IP address
obtained from the network operator, if
you checked the Static IP option.
You cannot edit or delete the default connection
profiles.
Application settings (Menu #.7)
Settings (Menu #)
Using profile options
From the profile list, press <Options> to
access the following options:
• View: view the properties of the selected
profile.
• Edit: edit the selected profile.
• New: add a new profile.
• Rename: change the profile name.
• Delete: delete the profile.
• Restore: restore the changed settings to
the default status.
Menu functions
Static DNS: specify if you want to
manually enter the Domain Name Server
(DNS) address; see the Server 1/Server
2 option.
If you want the address to be
automatically assigned by the server,
remove the check mark.
Server 1/Server 2: enter the Domain
Name Server (DNS) addresses.
Traffic class: select the traffic class.
3. Press <Save> to save the profile.
You can customise the settings for using
applications available on the phone.
Internet (Menu #.7.1)
Use this menu to select a connection profile to
be used for accessing the Internet. You can also
create or edit a profile.p. 124
Messages (Menu #.7.2)
Use this menu to change the default settings for
using the messaging services.p. 71
125
Menu functions
Contacts (Menu #.7.3)
VOD (Menu #.7.8)
Use this menu to change the settings for using
Contacts.p. 50
Camera (Menu #.7.4)
Use this menu to activate a connection profile
to be used for accessing streaming servers to
use VOD (Video on Demand) services. You can
also create or edit a profile.p. 124
Use this menu to change the default settings for
taking photos.p. 95
Security (Menu #.8)
Video recorder (Menu #.7.5)
Use this menu to change the default settings for
recording videos.p. 99
Voice recorder (Menu #.7.6)
Use this menu to change the default settings for
the voice recorder.p. 110
Media player (Menu #.7.7)
Use this menu to change the default settings for
playing media files in the media player.p. 52
126
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and USIM/SIM
card.
If you enter an incorrect PIN/PIN2 three times,
the USIM/SIM card is blocked. To unblock it, you
need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by
your network operator.
Fixed dialling mode (Menu #.8.4)
Use this menu to protect the phone from
unauthorised use. When this feature is enabled,
you must enter a 4- to 8-digit phone password
each time the phone is switched on.
The password is preset to 00000000. To
change the password, use the Change phone
password menu.
If supported by your USIM/SIM card, Fixed
Dialling Number (FDN) mode restricts your
outgoing calls to a limited set of phone
numbers. When this feature is enabled, you can
make calls only to phone numbers stored on the
USIM/SIM card.
SIM lock (Menu #.8.2)
Use this menu to change your phone password.
PIN lock (Menu #.8.3)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled,
the phone requires your PIN each time it is
switched on.
Change phone password (Menu #.8.5)
Settings (Menu #)
This menu allows your phone to work only with
the current USIM/SIM by assigning a USIM/SIM
password. You must enter the USIM/SIM
password to use a different USIM/SIM card.
Menu functions
Phone lock (Menu #.8.1)
Privacy lock (Menu #.8.6)
Use this menu to lock access to messages,
media files, Contacts entries, call logs, or
calendar data. When a privacy option is
enabled, you must enter the phone password to
access the locked items.
Change PIN code (Menu #.8.7)
Use this menu to change your PIN. The PIN lock
feature must be enabled to change the PIN.
127
Menu functions
Change PIN2 code (Menu #.8.8)
If supported by your USIM/SIM card, use this
menu to change your current PIN2.
Mobile tracker (Menu #.8.9)
When someone tries to use your phone with
another USIM/SIM card, the phone will
automatically send the preset tracking message
to your family or friends. You can check the
phone number from which the messages are
sent and then track your phone. This feature is
useful when the phone is stolen or lost.
Sending of the tracking message will be billed to
the user of the unauthorised USIM/SIM card. To
use your phone with any other USIM/SIM card,
you must first deactivate the Mobile tracker
feature.
1. Enter the phone password and press
<Confirm>.
128
2. Specify the following options:
• Activation: activate or deactivate the
Mobile tracker feature.
• Recipients: specify phone numbers to
which you want to send the tracking
messages.
• Sender: enter the sender’s name.
• Messages: check the preset tracking
message text.
3. When you have finished, press <Save>.
4. Press <Accept> if you agree to the terms
and conditions of service listed on the
screen.
Memory status (Menu #.9)
Use this menu to check the amount of memory
being used for storing data, such as messages,
media files, calendar data, or contacts entries.
You can view the amount of shared memory.
Reset settings (Menu #.0)
Use this menu to reset the phone’s settings you
have changed and clear all data you have
added.
1. Enter the phone password and press
<Confirm>.
The password is preset to 00000000. You
can change this password.p. 127
2. Press <Yes>. The phone automatically turns
itself off and then back on.
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Please insert SIM card”
• Be sure that the USIM/SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
129
Solve problems
“PIN lock”
• You are using your phone for the first time.
You must enter the PIN supplied with the
USIM/SIM card.
• The PIN lock feature is enabled. Every time
the phone is switched on, the PIN has to be
entered. To disable this feature, use the PIN
lock menu.
“PUK lock”
• The PIN code was entered incorrectly three
times, and the USIM/SIM card is now
blocked. Enter the PUK supplied by your
service provider.
“No service,” “Network failure,” or “Not
done” displays
• The network connection has been lost. You
may be in a weak signal area. Move and try
again.
130
• You are trying to access an option for which
you have no subscription with your service
provider. Contact the service provider for
further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an outgoing
call barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on.
([ ] pressed for more than one second.)
• Be sure that you are accessing the right
cellular network.
• Be sure that you have not set an incoming
call barring option.
The phone starts beeping and “Low
battery” flashes on the display
• Your battery is insufficiently charged.
Recharge the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
). The number of bars indicates
the signal strength from strong (
) to
weak ( ).
• Try moving the phone slightly or moving
closer to a window if you are in a building.
No number is dialled when you re-call a
Contacts entry
• Use the Search contact feature to ensure
the number has been stored correctly.
• Re-store the number, if necessary.
Solve problems
Your correspondent cannot hear you
speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
The battery does not charge properly or
the phone sometimes turns itself off
• Wipe the charging contacts both on the
phone and on the battery with a clean soft
cloth.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
131
Health and safety information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the limits for exposure to radiofrequency (RF) energy, as recommended by the
EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through
the periodic and thorough evaluation of
scientific studies. The limits include a
substantial safety margin designed to ensure
the safety of all persons, regardless of age and
health.
132
The exposure standard for mobile phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR limit
recommended by the EU Council is 2.0 W/kg.*
The highest SAR value for this model phone was
0.102 W/kg.
SAR tests are conducted using standard
operating positions with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while
operating can be well below the maximum
value.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary, depending on national reporting
requirements and the network band.
Precautions when using batteries
• Never use a charger or battery that is
damaged in any way.
• Use the battery only for its intended
purpose.
• If you use the phone near the network’s
base station, it uses less power.Talk and
standby time are greatly affected by the
signal strength on the cellular network and
the parameters set by the network operator.
• Battery charging time depends on the
remaining battery charge, the type of
battery, and the charger used. The battery
can be charged and discharged hundreds of
times, but it will gradually wear out. When
the operation time is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries, and
recharge your battery only with Samsungapproved chargers. Disconnect the charger
from the power source when it is not in use.
Do not leave the battery connected to a
charger for more than a week, since
overcharging may shorten its life.
Health and safety information
This is because the phone is designed to
operate at multiple power levels so as to use
only the power required to reach the network.
In general, the closer you are to a base station,
the lower the power output of the phone.
Before a new model phone is available for sale
to the public, compliance with the European
R&TTE Directive must be shown. This directive
includes as one of its essential requirements the
protection of the health and safety of the user
and any other person.
133
Health and safety information
• Extreme temperatures will affect the
charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places
because the capacity and lifetime of the
battery will be reduced. Try to keep the
battery at room temperature. A phone with a
hot or cold battery may not work
temporarily, even when the battery is fully
charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
• Do not short-circuit the battery. Accidental
short-circuiting can occur when a metallic
object like a coin, clip or pen causes a direct
connection between the + and – terminals of
the battery (metal strips on the battery). For
example, do not carry a spare battery in a
pocket or bag where the battery may contact
metal objects.
134
Short-circuiting the terminals may damage
the battery or the object causing the shortcircuiting.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
Road safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When you are driving a car, driving is your first
responsibility. When using your wireless phone
while driving, follow local regulations in the
country or region you are in.
Electronic devices
Remember to follow any special regulations in
force in the area you are in, and always switch
off your phone whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for
detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the
normal operating position (held to your ear with
the antenna pointing over your shoulder).
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be
shielded against the RF signals from your
wireless phone. Consult the manufacturer to
discuss alternatives.
Health and safety information
Operating environment
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with
the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research. If you have any reason to suspect
that interference is taking place, switch off your
phone immediately.
135
Health and safety information
Hearing aids
Vehicles
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy.
Your physician may be able to assist you in
obtaining this information.
Switch off your phone in health care facilities
when regulations posted in these areas instruct
you to do so.
136
Posted facilities
Switch off your phone in any facility where
posted notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Emergency calls
Health and safety information
Users are advised to switch off the phone while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical
plants, or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include the areas below decks on boats,
chemical transfer or storage facilities, vehicles
using liquefied petroleum gas, such as propane
or butane, areas where the air contains
chemicals or particles, such as grain, dust or
metal powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
This phone, like any wireless phone, operates
using radio signals, wireless, and landline
networks as well as user-programmed
functions, which cannot guarantee connection
in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
To make or receive calls, the phone must be
switched on and in a service area with adequate
signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your
present location. Emergency numbers vary
by location.
137
Health and safety information
3. Press [ ].
Certain features like Call Barring may need to
be deactivated before you can make an
emergency call. Consult this document and
your local cellular service provider.
Other important safety information
• Only qualified personnel should service the
phone or install the phone in a vehicle.
Faulty installation or service may be
dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the phone, its parts, or
accessories.
138
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including
installed or portable wireless equipment, in
the area over the air bag or in the air bag
deployment area. Improperly installed
wireless equipment could result in serious
injury if the air bag inflates.
• Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because they
can interfere with the operation of the
aircraft.
• Failure to observe these instructions may
lead to the suspension or denial of telephone
services to the offender, or legal action, or
both.
Care and maintenance
• Do not store the phone in hot areas. High
temperatures can shorten the life of
electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When
the phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
• Do not drop, knock, or shake the phone.
Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean the
phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
Health and safety information
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Keep your phone and all its parts and
accessories out of the reach of small children
and pets. They may accidentally damage
these things or choke on small parts.
• Keep the phone dry. Precipitation, humidity,
and liquids contain minerals that corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing
so may cause an electric shock to you or
damage to the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
139
Health and safety information
• Do not put the phone in or on heating
devices, such as a microwave oven, stove, or
radiator. The phone may explode when
overheated.
• When the phone or battery gets wet, the
label indicating water damage inside the
phone changes colour. In this case, phone
repairs are no longer guaranteed by the
manufacturer's warranty, even if the
warranty for your phone has not expired.
• If your phone has a flash or light, do not use
it too close to the eyes of people or animals.
This may cause damage to their eyes.
• Use only the supplied or an approved
replacement antenna. Unauthorised
antennas or modified accessories may
damage the phone and violate regulations
governing radio devices.
140
• If the phone, battery, charger, or any
accessory is not working properly, take it to
your nearest qualified service facility. The
personnel there will assist you, and if
necessary, arrange for service.
Index
A
ABC mode, text input • 33
Active folder • 117
Alarm • 113
Answering
call • 36, 39
second call • 37
Anykey answer • 117
Auto redial • 122
B
Background image • 118
Backlight time, set • 119
Barring, calls • 121
Battery
charging • 7
low indicator • 8
precautions • 133
Bluetooth
receiving, data • 104
sending, data • 103
settings • 101
Broadcast messages • 70
Browser, web • 54
C
Calendar • 88
Call costs • 43
Call log
dialled • 42
missed • 41
received • 42
Call time • 43
Caller groups • 47
Caller ID • 120
Calls
answering • 36, 39
barring • 121
diverting • 120
holding • 37
making • 35
redialling • 35
rejecting • 36
transferring • 38
waiting • 121
Camera
photos • 93
videos • 97
Characters, enter • 32
Configuration messages • 66
Connection tone • 115
Contacts
adding • 46
editing • 45
finding • 44
options • 45
speed-dialling • 48
Creating messages
e-mail • 62
MMS with files • 63
MMS • 59
SMS • 58
141
Index
CUG (Closed User Groups) • 122
Cyber pet • 104
D
Date, set • 116
Deleting
call log • 42
e-mail • 68, 71
MMS • 66
photos • 80, 97
SMS • 65, 71
video clips • 81, 100
Dialled calls • 42
Display
backlight, set • 119
brightness • 119
icons • 11
language • 116
layout • 11
settings • 118
Diverting, calls • 120
Document files • 86
142
DRM (Digital Rights
Management) • 77
DTMF tones, send • 39
E
E-mails
creating/sending • 63
deleting • 68
settings • 74
viewing • 67, 68
Emergency calls • 137
F
FDN (Fixed Dialling Number)
mode • 127
File manager • 77
File messenger • 63
File sender • 63
File viewer • 86
Folder tone • 115
G
Games • 84
Greeting message • 118
H
Health and safety • 132
Holding, call • 37
I
Icons, description • 11
Images, downloaded • 78
Inbox, messages
e-mail • 67, 68
SMS/MMS • 63
International calls • 35
Internet • 54
J
Java applications • 84
K
Key tones
selecting • 115
sending/muting • 38
volume • 115
L
M
Media player • 126
Memory card
accessing files • 88
installing • 30
Memory status
contacts • 50
downloaded items • 88
messages • 77
phone • 128
scheduled things • 93
Messages
broadcast • 70
configuration • 66
e-mail • 67
greeting • 118
MMS with files • 61
MMS • 59, 65
push • 66
SMS • 58, 64
Minute minder • 115
Missed alarm events • 88
Missed calls • 41
MMS messages
creating/sending • 59, 61
deleting • 66
settings • 72
viewing • 65
mPet • 104
Multiparty-call • 38
Music, downloaded • 81
N
Names
entering • 32
searching • 44
Network selection • 123
Numbers
searching • 44
storing • 46
Index
Language, select • 116
Last number, redial • 35
LCD brightness • 119
Locking
call log • 127
contacts • 127
media contents • 127
messages • 127
phone • 127
USIM/SIM card • 127
Low battery indicator • 8
O
Organiser • 88
Outbox, messages • 67
P
Password
barring • 121
phone • 127
Phone
care and maintenance • 139
display • 11
icons • 11
locking • 127
password • 127
143
Index
resetting • 129
switching on/off • 9
unpacking • 6
Photos
editing • 78
taking • 93
viewing • 78
PIN, change • 127
PIN2, change • 128
Privacy • 127
Problems, solve • 129
Profiles • 114
Push messages • 66, 77
R
Received calls • 42
Received messages
e-mail • 67, 68
MMS/SMS • 63
Recording
videos • 97
voice memos • 109
144
Redialling
automatically • 122
manually • 35
Resetting phone • 129
Ringer
incoming calls • 114
messages • 115
Road safety • 134
Roaming • 123
S
Safety
information • 132
precaution • 1
Security calls • 127
Sent messages • 67
Shortcuts • 117
Silent mode • 17
SIM card
inserting • 7, 8
locking • 127
SMS messages
creating/sending • 58
deleting • 65, 71
settings • 71
viewing • 64
Sound profiles • 114
Speakerphone • 38
Speed-dial • 48
Switching applications • 29
Switching on/off
microphone • 38
phone • 9
T
T9 mode, text input • 32
Templates, message • 69
Text, enter • 32
Time, set • 116
U
USIM card
inserting • 7
locking • 127
V
Index
Video calls
answering • 39
making • 39
options • 40
setting • 122
Videos
playing • 80
recording • 97
Voice recorder
playing • 109
recording • 109
Voicemail server • 76
W
Waiting call • 121
Wallpaper • 118
Web browser
access • 54
bookmarks • 56
145
Declaration of Conformity (R&TTE)
: EN 60950-1:2001
: EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
EN 301 489-17 v1.2.1 (08-2002)
EN 301 489-24 v1.2.1 (11-2002)
: EN 50360:2001
EN 50361:2001
: EN 301 511 v9.0.2 (03-2003)
EN 301 908-1 v2.2.1 (10-2003)
EN 301 908-2 v2.2.1 (10-2003)
EN 300 328 v1.6.1 (11-2004)
(name and signature of authorised person)
* It is not the address of the Samsung Service Centre. For the address or the
phone number of Samsung Service Centre, see the warranty card or contact the
retailer where you purchased your phone.
(place and date of issue)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park,Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2006. 05. 16
Yong-Sang Park / S. Manager
which will be made available upon request.
(Representative in the EU)
Samsung Electronics QA Lab.
The technical documentation kept at:
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The conformity assessment procedure referred to in Article 10 and
detailed in Annex[IV] of Directive 1999/5/EC has been followed
with the involvement of the following Notified Body(ies):
We hereby declare that [all essential radio test suites have been
carried out and that] the above named product is in conformity to all
the essential requirements of Directive 1999/5/EC.
Network
SAR
Safety
EMC
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
(factory name, address*)
Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City, KyungBuk, Korea, 730-350
Manufactured at:
(Model name)
SGH-Z560
(Product description)
GSM900/GSM1800/GSM1900/WCDMA with Bluetooth
Portable Cellular Telephone
For the following product:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement