- Computers & electronics
- Audio & home theatre
- Portable DVD/Blu-Ray players
- Boss Audio Systems
- BV11.2BGT
- Owner's manual
advertisement
Contents
Caution
Features and Controls
Monitor/DVD Player
Remote Control
Power and Mode Selection
Releasing The Monitor
Turning on The Monitor
Mute Function
Selecting an AV mode
Picture Control
Contrast/Brightness/Color/FM
DVD Setup
Setup Menu
General Setup
TV Aspect Ratio
Angle Viewing
OSD Language
Captions
Screen Saver
Last Position memory
Audio Setup
Speaker Setup
Equalizer Settings
Preferences Setup
TV Type
Parental
Audio
Subtitle
Default
Password Setup
Password Mode
Password Change
DVD Functions
Eject
Vol+/Vol-
4
6
6
8
10
10
10
10
11
12
12
18
19
19
19
20
17
17
17
17
18
20
20
15
15
15
15
15
16
13
13
14
14
14
14
Mute
Play or Pause
Audio
Stop
Arrows
Setup
Menu
Display
Number Buttons
Subtitle
Title
Slow
Fast Reverse Searching
Fast Forward Searching
Previous
Next
Repeat A-B
Repeat
NTSC/PAL
Angle
PBC
Zoom
GO To
SD/USB Functions
Connection Diagram
Installation
Disc Information
Troubleshooting
Specifications
20
20
20
21
21
21
21
22
22
23
23
23
24
24
25
25
25
26
26
26
27
27
27
28
29
30
31
32
33
3
Caution
Please read and observe all warnings and instructions in this manual and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
The lightning bolt with arrowhead inside in an equilateral
WARNING dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people.
CAUTION
The exclamation point inside an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
POWER
AV MENU
Installation of all TV monitors must be out of the driver s field of vision.
Do not try and service these products yourself, locale a qualified service center or factory service center for all repairs.
Be careful not to drop or apply under pressure to the front panel of your video monitor. If the screen cracks due to misuse, your warranty will be void!
WARNING
Do not mount the product where it will obstruct the deployment of the airbag or in an area where it would affect the driver s ability to control the vehicle. Also be careful to avoid mounting the product where it can become hazardous during sudden stops or in the event of an accident.
Use extra caution with any liquids in your car. If you or your child spills any liquid on these products, pull your vehicle to the roadside and turn the key off to disconnect or wipe the products with a towel. Do not operate the equipment until all liquids have either evaporated or you have had the monitor inspected at a service center by a qualified technician. Severe harm or danger can result.
Use only a damp cloth to clean the screen and use only purified water on the cloth. wring out all excess water prior to wiping the screen. Do not use any cleaners or chemicals to clean the screen.
In most cases a dry cloth will do!
4
SPECIFICATIONS
Power
Screen Format
Resolution Pixel
Color System
A/V Input
A/V Output
Dimension
D C 1 2 V
1 6 : 9
11 5 2 x 2 3 4
N T S C / PA L A u t o S e l e c t
D V D - AV 1 - AV 2
1 E A
1 3 . 5 ( L ) X 1 2 . 1 ( W ) X 3 . 1 ( H ) i n c h e s
Note: This equipment has been tested and has been found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference. In some cases, the user will be required to correct the interference at his own expense.
33
Troubleshooting
Symptom
Buttons do not work.
No sound
Remote control does not work properly.
Items to Check
Is the power turned on?
Is the audio which is connected with the audio cable set to receive the DVD signal output?
Is audio cable connected securely?
Is the monitor which is connected with the audio cable turned on?
Is the audio output set in the correct position?
Actions to be Taken
Check the car battery capacity.
Select the correct input mode for the audio receiver.
Connect the audio cable into the jacks securely.
Turn on the monitor connected with the audio cable.
Set the Audio Output to the correct position, and then turn on the DVD player again by pressing the POWER button.
Is the remote control facing the remote sensor?
Is the distance too far?
Is there any obstacle in the middle?
Is the battery weak?
Point the remote control toward the remote sensor of the product.
Use the remote control within 15 feet.
Remove the obstacle.
Replace with new battery.
Moisture or condensation on lens
When a disc is brought from a cold environment to a warm one, there may be moisture on the the disc, or condensation on the pickup lens. It will affect disc playback.
1. Remove the disc from the DVD player.
2. Turn on the power and leave it on for an hour to vaporize the condensation.
32
Caution
Quality installations are best performed by qualified and certified installers.
Don t touch the unit if there is a flash of lightning. You may receive an electric shock.
CAUTION
Watching the monitor for an extended period of time without the engine running may deplete the vehicle s battery charge.
This product is designed for operation with a 12 Volt DC, negative ground vehicle. It is not suitable for operation under other conditions or voltages.
Do not cover or stop up heater ducts or vents. It may cause a fire or receive an electric shock.
Do not bring magnetic devices such as credit card or magnetic card near the magnets.
Operating Notes
1. The operating temperature of this product is limited to 14 ~+140 F.
2. If your vehicle is extremely hot or cold you must allow time for your air conditioner or heater to cool or heat the vehicle until operating temperatures have returned to normal operating ranges.
3. Optimal picture quality is achieved when viewed from directly front of the monitor (+/-30degrees).
4. Do not open the housing and attempt to make any repairs yourself. Refer servicing to qualified personnel.
5. DVD Players use an invisible laser beam which can cause hazardous radiation exposure. Be sure to operate the unit correctly as instructed.
6. Do not cut the car power supply off while a disc is playing. It can cause damage to the DVD Player.
5
Monitor / Player System Components
Remote Control
Disc Information
DVD features
DVD discs provide high-resolution images with high-quality sound. This DVD player can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and
Mp3 discs.
Discs that cannot be played
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In addition, a CD or a CD-RW which was recorded on special software cannot be played.
Region code
Your DVD player is designed and manufactured to region management information that is recorded on a DVD disc. Please check the region code.
1: North America 2: Japan 3: Korea and Southeast Asia
4: Australia, Mid & South America 5: Russia 6: China
How to handle the disc
Don t touch the shiny side of the disc (the side with the embedded information).
Don t stick a label or a glue-based note on either side of the disc.
Don t use discs that have glue or a damaged label with exposed adhesive residue.
It might result in damage to your DVD player.
Don t put discs in the sunshine.
Park your car in the shade.
Monitor/DVD Player
How to handle the discs
Only use round discs. Discs with other shapes like a star, a heart, etc. may cause damage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dry one. Before playback, wipe the disc outward from the center with a clean cloth. Do not use any type of solvent such as thinner, benzene, commercially available cleaners or antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.
Wireless Headphones
(Sold Separately)
6 31
Installation
1. Open the package and check that these items are presents.
Features And Controls
POWER Button
MENU Button PLAY/PAUSE Button
INSTALLATION PLATE UNIT SCREW A SCREW B
2. Connect the external compoments to the RCA cable or AV output.
(Refer to the connection diagram on page 29)
3.Match the position of installation bracket and installation plate with screw A.
4. Tighten the unit with the supplied screw B.
30
Dome Light Button
AV Select Button
+/- Buttons
EJECT Button
Disc loading slot
AUX Input Jack
VIDEO
L
AUDIO
AV2 INPUTS
R
SD Input USB Input
..
X
..
Caution
Do not bring magnetic devices such as credit cards or magnetic cards near the monitor.
7
Features and Controls Connection Diagram
Remote Control
1 POWER
Turns the DVD Player/Monitor on or off.
2 MUTE
Press this button to switch off the audio during playback. Press again to restore the audio.
3 Auto TV (not function in this unit)
UP/DOWN/RIGHT/LEFT ARROWS
(not function in this unit)
A/V SELECT
DVD AV1 AV2
MENU (OSD on monitor)
Press this button to open the onscreen menu system to setup and control various parameters of the monitor and DVD player.
UP/DOWN
Use to move to the desired menu.
P/N
This button permits you to choose among Multi, PAL and NTSC.
MODE
Use this button to switch between three modes
DVD SD USB
MENU (DVD menu)
This button permits you to view the menu on the DVD.
SUBTITLE
Use this button to select the menu for choosing a subtitle language.
TITLE (Title menu)
When a DVD is playing, press this button to view the Title Menu.
DISPLAY
Press to show elapsed or remaining time of a chapter or a title.
PBC (Video CD only)
Press this button to access the special
Playback Control functions for VCD
2.0 format Video CD S.
NUMERIC button
Use when making a selection on the menu screen.
8
RETURN
Press this button to return to the root menu.
SETUP
Press this button to display the Setup menu. The Setup menu enables you to enter the settings required for the unit to work properly.
REPEAT
Press this button to change the playback mode to repeat.
GAME
Red AUDIO(R)
White AUDIO(L)
Yellow VIDEO
CAMCORDER
Constant 12 Volts
YELLOW
BLACK
Ground
Switched 12 Volts
RED
Car dome lamp
WHITE
AV Input
(AV 2)
Red AUDIO(R)
White AUDIO(L)
Yellow VIDEO
AV Input
(AV 1)
Red AUDIO(R)
White AUDIO(L)
Yellow VIDEO
GAME
CAMCORDER
AMP
MONITOR
POWER AV MENU VOLVOL+
AV
Output
Positive Negative
Trigger Door Trigger Door
Switch Switch
Dome Light Trigger
29
FM ANTENNA
SD/USB Functions
1. When USB or SD is inputed, the monitor will be displayed as shown below. But when you input USB that the function can not change into SD S state (only the SD is moving). And you can select the desired menu by remote control of monitor.
pressing the MODE button on the
2.
Use the (arrow and ENTER) buttons to select and set desired settings.
00:00
000/003
00:00 kbps
\
..
..
28
Name And Function Of Each Part
A-B (repeat from A to B)
Use this button to select the beginning and end of a track which you wish to have repeat in playback.
VOL-/+ button
Use to incease or decrease volume level.
AUDIO
Use this button to select one of the audio soundtracks programmed on a
DVD disc. It is alse used to select the audio output mode for the DVD playback.
ENTER
Press this button to confirm the item you have found and highlighted using the arrow buttons. Usually this is done to confirm a selection or item to be played on the DVD.
ZOOM
If your DVD disc supports zooming in to see the program differently, pressing this button will enable you to change the amount of zoom.
UP/DOWN/RIGHT/LEFT ARROWS
Use thes buttons to navigate the various menus and screens for the monitor and DVD systems.
PLAY/PAUSE
To start playback of a disc, press this button. Press again to pause the playback. If playback is paused, press this button to resume playback.
GO TO
Use to search for a title or a chapter on your DVD disc.
STOP
Press this button to stop the playback of the current disc.
SKIP FORWARD/BACK
Use these buttons to skip to the next or last track, chapter or file on the disc in the player.
FAST FORWARD/REVERSE PLAY
Use these buttons to select either fast forward or fast reverse playback.
9
Power And Mode Selection
Releasing The Monitor
P u s h t h e r e l e a s e b u t t o n ( l o c a t e d o n t h e f r o n t e d g e o f t h e s c r e e n h o u s i n g ) a n d l o w e r t h e m o n i t o r. Yo u c a n a l s o a d j u s t t h e s w i v e l a n g l e .
RELEASE BUTTON
Make this arrow in DOWN direction only.
Turning on The Monitor
1. Connect the monitor to external devices.
2. Press the POWER button on either the remote control or the unit once to turn the power on.
Press the same POWER button to turn the power off.
POWER
UNIT
REMOTE CONTROLLER
3.Power on the external devices and play.
Mute Function
1. Press the MUTE button on the remote control to mute the audio.
2. Press the MUTE button again on the remote control to return to the previous volume level.
10
DVD Functions
PBC
[DVD]/[AUDIO]/[MP3]
This button does not function in PBC mode.
[VCD]
You can turn the PBC (Play Back Control) function on or off by pressing this button.
When PBC is loaded, the PBC function is enabled automatically. This function is similar to selection of DVD title. Please note that this function does not work with
MP3 dics.
Zoom
[DVD]
Some DVDs are programmed to allow you to zoom into the image, magnifying it. Pressing the ZOOM button does this in steps, according to the chart to the right.
[VCD]/[AUDIO]/[MP3]
This button does not function in this mode.
OSD
2 X
3 X
4 X
1 / 2
1 / 3
1 / 4
GO TO
The GO TO function allows you to begin playback at a specific location on the disc. To do this, press GO TO and navigate the screen which follows to select this playback location.
Title
Move to the desired title.
Chapter
Move to the desired chapter.
Audio
Selects the desired audio output.
Subtitle
Select the desired subtitle.
Angle
Watch the different view angle.
Menu
Title
Chapter
Audio
Subtitle OFF
TT Time
Total time.
CH Time
Chapter time.
Repeat
Sets the repeat play.
Time Display
Watch play time.
27
CONDITION
ZOOM X 2
ZOOM X 3
ZOOM X 4
ZOOM X 1 / 2
ZOOM X 1 / 3
ZOOM X 1 / 4
Off
DVD Functions
Repeat
[DVD]
Pressing REPEAT button changes the play mode as follows:
OSD
Chapter
Title
All
CONDITION
Repeat chapter
Repeat title
All
Repeat off
[VCD]
The REPEAT button does not function when a VCD disc is being played.
[AUDIO]
Pressing REPEAT button changes the play mode as follows:
OSD
Track
All
CONDITION
Repeat single
All
Repeat off
[MP3]
Pressing REPEAT button changes the play mode as follows:
OSD
Repeat One
Repeat Folder
Folder
Shuffle
Random
Single
CONDITION
Single
Repeat folder
Repeat folder one time
All
Random play
Single play
NTSC/PAL
This button is used to select the video standard for the DVD mode between NTSC and PAL formats.
Angle
Some DVD s are recorded with additional footage which allows you to view a scene from a different camera angle. If the ANGLE feature is enabled in the Setup Menu
(see page 14) and the disc has this option,an angle mark will be displayed on the screen. When that occurs, press the ANGLE button to see these alternate viewing angles.
26
Power and Mode Selection
Selecting an AV mode
1. Turn the power ON on the unit and on the external devices.
2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button on the unit or on the remote control.
3. Play the external device.
11
Picture Control
Contrast/Brightness/Color/FM
To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until you arrive at the screen for that item. Use the arrow buttons to adjust the value.
Press the MENU button to make another adjustment or leave the MENU system.
1. Bring up the on-screen function menu by pressing the MENU button on the unit or the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you see the item you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
CONTRAST
42
BRIGHTNESS
55
COLOR
50
FM
87.7
(FM function added 87.7 87.9 88.1 88.3MHz)
DVD Functions
Prev( )
[DVD]/[VCD]
Press this button to advance the player from the current chapter chapter .
to the previous
[AUDIO]/[MP3]
Press this button to move to the previous track.
Next( )
[DVD]/[VCD]
Press this button to advance the player from the current chapter to the next chapter .
[AUDIO]/[MP3]
Press this button to move from the current track to the next track .
Repeat(A-B)
[DVD]/[VCD]/[AUDIO]
You can set the player to repeat a segment over and over until you cancel it. To do this, you mark the beginning of the desired segment (A) and the end of segment (B).
The selected segment will be repeated automatically until canceled.
OSD CONDITION
A
Start point of repeat
A B
Ending point repeat function
12 25
DVD Functions
Fast Reverse Searching( )
[DVD]
Pressing FR button repeatedly changes the play mode as follow:
OSD CONDITION
2X rewind search FR 2X
FR 4X 4X rewind search
8X rewind search
FR 8X
FR 16X
FR 32X
PLAY
16X rewind search
32X rewind search
Play
[AUDIO]
Pressing FR button repeatedly changes the play mode as follow:
OSD
FR 2X
CONDITION
2X rewind search
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
[MP3]
Pressing FR button repeatedly changes the play mode as follows:
OSD
FR 2X
CONDITION
2X rewind search
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
Fast Forward Searching( )
[DVD]
Pressing FF button repeatedly the play mode as follow: changes
OSD
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forward search
Play
[AUDIO]/[VCD]
Pressing FF button repeatedly changes the play mode as follow:
OSD
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forward search
Play
[MP3]
Pressing FF button repeatedly changes the play mode as follows:
OSD
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forward search
Play
24
DVD Setup
Setup Menu-Main Page
When the SETUP button is pressed, the setup menu will be displayed as shown below. Select the menu category and make changes according to your preferences.
1. Press the STOP button if the disc is playing.
2. Press the SETUP button to display setup menu.
3. Use the (arrow and ENTER) buttons to select and set desired settings.
4. Press the SETUP button again to turn off the setup menu.
13
DVD Setup
General Setup
1. TV Aspect Ratio
In the Setup function called TV Display, you set the player to output the video signal at the same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).
Normal / PS 4:3 PAN SCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)
Normal / LB 4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)
PS Normal/PS
Normal/LB
Wides
2. OSD Language
Use this option to set the OSD language.
When selected, change to set the on-screen display language.
PS
ENG
English
DVD Functions
Subtitle(SUB-T)
[DVD]
This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)
Title
[DVD]
Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.
Slow( )
[DVD]/[VCD]
Use this button to play a disc in slow-forward or slow-reverse. Slow playback can be done at five different speeds. Pressing this button repeatedly decreases the speed in steps. Pressing a sixth time returns playback to the normal speed.
OSD
1 / 2
1 / 4
1 / 8
1 / 16
1 / 32
1 / 2
1 / 4
1 / 8
1 / 16
1 / 32
Play
CONDITION
2X slow forward
4X slow forward
8X slow forward
16X slow forward
32X slow forward
2X slow rewind
4X slow rewind
8X slow rewind
16X slow rewind
32X slow rewind
Play
14 23
DVD Functions
Display
[DVD]
Pressing the DISPLAY button on the remote control changes the play mode as follows:
[AUDIO]
Pressing the display button displays information about the current CD on the screen as follows:
OSD
Title Elapsed
Title Remain
Chapter Elapsed
Chapter Remain
Display Off
CONDITION
Display the Title Elapsed
Display the Title Remain
Display the Chapter Elapsed
Display the Chapter Remaining
No sign
[VCD]
Whenever press the button,title chapter will be displayed as follows:
OSD
Single Elapsed
Single Remain
Total Elapsed
Total Remain
CONDITION
Display the single elapsed
Display the single remain
Display the total elapsed
Display the total remaining
[MP3]
Your DVD player will display the counter automatically when you play the MP3 disc.
OSD
Single Elapsed
Single Remain
Display Off
CONDITION
Display time
Left display time
No sign
Number Buttons
[DVD]
The 0 through 9 number buttons are used to enter the number of the track, the number of the DVD chapter, the time, the date, etc.
[AUDIO]
OSD CONDITION
Select a track by pressing the corresponding number button.
Select Track:__ Select track no
[DVD]
You can select a track in the folder by pressing the corresponding number button.
OSD
__:__
CONDITION
Select track no
22
DVD Setup
Audio Setup
Show below are two examples of Audio Setups.
1. Speaker Setup
15
DVD Setup
Downmix
Use this function to set the input audio signal to match your speaker setup.
Front Speaker
Use this function to change the setting from the factory.
2. Equalizer Settings
EQ Equalizer Type
In this menu you can choose the desired preset equalizer mode.
(Choose from Rock, Pop, Live,Dance, Techno,
Classic or Soft)
LRG Larege
None None
Rock
Pop
Live
Dance
Techno
Classic
Soft
None None
Rock
Pop
Live
Dance
Techno
Classic
Soft
DVD Functions
Stop( )
[DVD]/[AUDIO]
In DVD mode, Press STOP to stop playback.
To resume playback, press PLAY/PAUSE. If you press STOP and then PLAY/PAUSE twice, the player will begin playback at the first scene of the movie.
[MP3]
In MP3 mode, Pressing STOP will stop the audio playback. Press PLAY/PAUSE to begin playback of the first title on the disc.
1 Time Press Play Key To Continue
2 Time
1 Time
OSD
OSD
Stop
CONDITION
Disc Stop
Stop
Stop
CONDITION
Arrows( / / / )
[DVD]
In addition to navigating the various menus, you can use the arrow buttons to define the area of the screen you want to enlarge in ZOOM mode.
[MP3]
After pressing STOP button, select the desired folder and set the condition by pressing
ENTER button.
Setup
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD settings to suit your equipment and preferences.
Menu
[DVD]
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies, depending on the programming of the disc.
16 21
DVD Functions
Eject
When this button is pressed, the disc is ejected. When this button is pressed for more than 3 seconds, the disc is unconditionally ejected. Use this function if you encounter difficultly ejecting a disc.
Vol+/Vol-
Use these buttons to adjust the audio output level of the speaker from 0 to 100.
Mute
Press MUTE to turn off the audio part of the currently playing program. Press it again to return the audio volume to the level at which you were last listening.
OSD
Mute
Mute off
CONDITION
Mute
Mute off
Play or Pause( )
Whenever this button is pressed, the mode switches from pause to play or play to pause.
OSD CONDITION
Play Disc
Pause
Audio
[DVD]
Change the audio output format.
(A vailable only if the disc supports available audio type.)
[VCD]/[AUDIO]
Changes the audio output format.
(Available only of the disc supports available audio type.)
[MP3]
An invalid button press.
OSD
1 / 2 : Ac3 2CH English
2 / 2 : Ac3 5.1CH English
CONDITION
2 Channel
5.1 Channel
OSD
Stereo
Mono Left
Mono Right
Mix Mono
CONDITION
Stereo
Mono Left
Mono Right
Mix Mono
20
DVD Setup
Preference
1. TV Type
Choose the proper TV format appropriate to the monitor you have connected to the player from the following: NTSC, PAL or Multi type.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to TV Type.
4. Press the ENTER button.
5. Press the / buttons to select TV Type.
Audio
Subtitle
Default
NTSC
ENG
PAL
Multi
NTSC
2. Parental
The Parental Control settings limit the player to only play content at or below a certain movie rating. The ratings systems in different countries vary. In the USA, the Motion
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.
In this menu item, you can set what is the highest level of rating you wish to allow the unit to play.
1. Press the SETUP button when stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Parental.
4. Press the ENTER button.
5. Press the / buttons to select desired parental level.
Audio
Subtitle
Default
NTSC
ENG
3. Audio
Use the audio language menu to select the subtitle language that you prefer. If the disc you are playing has that language available, it will display subtitles in that language.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Audio.
4. Press the ENTER button.
5. Press the / buttons to select desired audio language.
Audio
Subtitle
Default
NTSC
ENG
English
17
DVD Setup
4. Subtitle
In the Subtitle menu, you can select a subtitle language. Please note that subtitle will only appear in this language if the disc programming has included it.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Subtitle.
4. Press the ENTER button.
5. Press the / buttons to select desired subtitle.
5. Default
If you select RESET when in the DEFAULT settings mode, all the settings of the Setup Menu will be returned to the factory defaut settings, except for
Parental Level, Region and Password values.
1. Press the SETUP button when stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Default.
4. Press the ENTER button to select Reset.
Audio
Subtitle
Default
Audio
Subtitle
Default
NTSC
ENG
French
Spanish
Chinese
Japanese
Korean
Russian
NTSC
On
ENG
Reset
DVD Setup
Password Setup
1. Password Mode
Password Setup, which is required for using the Parental Controls settings, is divided into two modules: Turning on the Password function, and setting a Password. The first step is to turn it on in the Password Mode setting.
On
Off Password
2. Password Change
In the Password setup, you must first enter the current 6-digit passcode, and then you have the opportunity to change it. The factory default passcode is 136900 .
Once you have changed and confirmed the password, press the ENTER button.
Password
On
Change
Old Password
New Password
Confirm PWD
OK
18 19
Installing The Snap On Covers
1.
2.
3.
4.
5.
Housing Snap On Cover
(Screen Back Cab)
Snap On Cover
(Shroud 1)
Snap On Cover
(Shroud 2)
Place the pod on a soft surface to avoid damaging the plastic.
Installing The Shroud
1 2 3
Pry Tool
Removing The Snap On Cover(Shroud) From The Housing
Working on a soft surface to avoid damaging the plastic.
Insert the supplied pry tool between the Housing and Snap On Cover (Shroud) , then press the pry tool to release the Snap On Cover (Shroud).
1 2
3 4
4
Removing The Snap On Cover(Screen Back) From LCD The Housing
Working on a soft surface to avoid damaging the plastic.
Insert the supplied pry tool between the Housing and Snap On Cover (Screen Back) , then press the pry tool to release the Snap On Cover (Screen Back).
Begin by hooking the area and slide the cover over the pod. The cover will snap in place.
Installing The Screen Cover
(A) (A)
Open the screen and hook the two tabs (A) on the bottom edge of the screen. Snap the opposite side over the hinge.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project