Samsung SGH-Z720 User manual

Samsung SGH-Z720 User manual
SGH-Z720
User’s Guide
Use road safety at all times
Do not use a hand-held phone while driving.
Park the vehicle first.
Switch off the phone when refuelling
Important
safety
precaution
Failure to comply with the
following precautions may be
dangerous or illegal.
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference.
Using them in an aircraft is both illegal and
dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be
using equipment that could be sensitive to
external radio frequency energy. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Accessories and batteries
Meet any special regulations in force in any
area and always switch off your phone
whenever it is forbidden to use it, or when it
may cause interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data
cables. Use of any unauthorised accessories
could damage you or your phone and may
be dangerous.
Water resistance
Your phone is not water-resistant. Keep it
dry.
Sensible use
Use only in the normal position (held to the
ear). Avoid unnecessary contact with the
antenna when the phone is switched on.
Emergency calls
Key in the emergency number for your
present location, then press
.
Keep your phone away from small
children
Important safety precaution
Be aware of special regulations
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volume, prolonged
listening to a headset can damage
your hearing.
Qualified service
Only qualified service personnel may repair
your phone.
For more detailed safety information, see
"Health and safety information" on page
117.
Keep the phone and all its parts, including
accessories, out of the reach of small
children.
1
About this Guide
•
This User’s Guide provides you with
condensed information about how to use
your phone. To quickly learn the basics for
your phone, please refer to “Get started”
and “Step outside the phone.”
In this guide, the following instruction icons
appear:
Indicates that you need to pay
careful attention to the subsequent
information regarding safety or
phone features.
Indicates that you can get more
information on the referenced page.
→
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
[
]
< >
2
Indicates a key on the phone.
For example, [ ]
Indicates a soft key, whose function
is displayed on the phone screen. For
example, <Select>
3G
Your phone is capable of
operating in a 3G
environment, allowing
much greater data transfer
speed, video streaming,
and video conferencing.
Special features of your phone
•
Camera and camcorder
Use the camera module on
your phone to take a photo
or record a video.
•
Media player
Play media files on your
phone. You can enjoy high
quality videos and music.
•
•
Web browser
Access the wireless web to
get up-to-the-minute
information and a wide
variety of media content.
•
Get personal with photo
caller ID
See who’s calling you with
their very own photo
displays.
•
Name card
Create name cards with
your number and profile.
Whenever introducing
yourself to others, use this
convenient electronic name
card.
•
File viewer
Open documents in various
formats on the phone
without corruption.
•
Multimedia Message
Service (MMS)
Send and receive MMS
messages with a
combination of text,
images, video, and audio.
•
E-mail
Send and receive e-mails
with image, video, and
audio attachments.
•
Java
Enjoy Java™-based
embedded games and
download new games.
•
Calendar
Keep track of your daily,
weekly, and monthly
schedule.
Special features of your phone
Bluetooth
Transfer media files and
personal data and connect
to other devices using free,
wireless Bluetooth
technology.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Keys, features, and locations
Get started
7
First steps to operating your phone
18
19
20
22
23
24
25
Enter text
27
Pinyin, Stroke, ABC, T9, Number, and Symbol
modes
Install and charge the phone ...................... 7
Power on or off......................................... 8
Keys and display ...................................... 9
Access menu functions ............................ 12
Customise your phone............................. 13
Make/Answer calls .................................. 15
Call functions
Step outside the phone
Solve problems
16
Begin with your camera, the media player, the
web, and other special features
Use the camera ...................................... 16
Play music ............................................. 17
4
Browse the web ......................................
Use Contacts ..........................................
Send messages.......................................
View messages .......................................
Use Bluetooth .........................................
Switch applications ..................................
Use a memory card .................................
31
Advanced calling features
Menu functions
37
All menu options listed
115
Help and personal needs
Health and safety information
117
Overview of menu functions
To access Menu mode, press [OK] in Idle mode.
1 Call log
2 Contacts
p. 37
p. 39
3 Media player
p. 43
4 Internet
p. 49
1
2
3
4
5
6
7
p. 49
p. 50
p. 51
p. 51
p. 51
p. 52
p. 52
Go to homepage
Enter URL
Bookmarks
Saved pages
History
Advanced
Browser settings
5 Messaging
p. 52
1
2
3
4
5
6
7
8
9
0
*
p. 52
p. 57
p. 60
p. 61
p. 62
p. 62
p. 63
p. 63
p. 64
p. 64
p. 70
Create new message
Inbox
Email inbox
Drafts
Outbox
Sentbox
My folder
Templates
Delete all
Messaging settings
Memory status
6 My files
p. 70
Images
Videos
Sounds
Games and more
Other files
Memory status
p. 71
p. 73
p. 74
p. 75
p. 76
p. 79
7 Calendar
p. 79
8 Camera
p. 83
9 Google/Yahoo!2
p. 89
* Applications
p. 90
1
2
3
4
5
6
7
8
9
p. 90
p. 90
p. 91
p. 93
p. 94
p. 94
p. 95
p. 95
p. 95
Memo
Tasks
Voice recorder
World clock
Calculator
Converter
Timer
Stopwatch
SAT1
0 Alarms
p. 95
# Settings
p. 97
1
2
3
4
5
6
7
8
9
0
*
Phone profiles
p.
Time & date
p.
Display & light settings p.
Phone settings
p.
Call settings
p.
p.
Security
Application settings
p.
Network settings
p.
p.
Memory settings
2
Operator settings
p.
Master reset
p.
97
98
98
100
101
104
106
108
113
113
114
1. Shows only if supported by your
USIM/SIM card.
2. Shows only if supported by your
service provider.
5
Unpack
Make sure you have each item
•
•
•
•
•
•
Your phone
Keys, features, and locations
Phone
Travel Adapter
Battery
PC Data Cable
PC Link CD
User’s Guide
You can obtain various
accessories from your local
Samsung dealer.
The items supplied with
your phone and the
accessories at your
Samsung dealer may
vary, depending on your
country or service
provider.
Rear camera
lens
Front camera
lens
Earpiece
Camera/
Video call key
Display
Headset/
Adapter jack
Menu access/
Confirm key
Volume keys
Left soft key
Dial key
Application
switch key
Memory card slot
Special function
keys
6
Navigation keys
(Up/Down/Left/Right)
Right soft key
Power on/off/
Menu exit key
Delete key
Alphanumeric keys
Microphone
Get started
First steps to operating your phone
Install the
battery.
Reattach the
battery cover.
USIM/SIM card information
When you subscribe to a cellular network,
you receive a plug-in SIM (Subscriber
Identity Module) card loaded with your
subscription details, such as your PIN, and
available optional services. For 3G services,
you can purchase a USIM (Universal
Subscriber Identity Module) card.
Plug the travel adapter into the phone.
Install and charge the phone
Remove the
battery cover.
Insert the USIM/
SIM card.
Plug the adapter into a standard AC
power outlet.
If the phone is
already on, first turn
it off by pressing
and holding [ ].
Make sure that the
gold-coloured
contacts on the card
are face down.
7
Get started
When the phone is completely charged
(the battery icon becomes still), unplug
the adapter from the power outlet.
Power on or off
Switch on
2. Press and hold [
Remove the adapter from the phone.
If the battery level becomes too low, the
phone automatically turns off. Recharge
your battery.
].
Do not turn on
the phone
when mobile
phone use is
prohibited.
3. If necessary, enter the
PIN and press
<Confirm>.
Switch off
1. Open the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
1. Open the phone.
2. Press and hold [
].
Keypad lock
When you close the phone, the keypad lock
feature locks the exposed keys so that
nothing will happen if the keys are
accidentally pressed.
To unlock the keypad, press <Unlock> and
then press <OK>.
8
Keys and display
Keys
In Idle mode, access your
favourite menus directly.
p. 100
In Menu mode, scroll through
menu options.
In Idle mode, access Menu
mode.
In Menu mode, select a
highlighted menu option or
confirm input.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or
received.
Delete characters from the
display or items in an
application.
Get started
Perform the function indicated
on the bottom line of the display.
Press and hold to switch the
phone on or off.
End a call.
In Menu mode, cancel input and
return the phone to Idle mode.
Enter numbers, letters, and
some special characters.
In Idle mode, press and hold [1]
to access your voicemail server.
Press and hold [0] to enter an
international call prefix.
Enter special characters.
Press and hold [ ] to activate or
deactivate the Silent profile.
Press and hold [ ] to enter a
pause between numbers.
Adjust the phone volume.
In Idle mode, adjust the key
tone volume. With the phone
closed, press and hold to turn on
the display.
9
Get started
Open the application switch
window to access other
applications without exiting the
current application.
In Idle mode, press and hold to
turn on the camera or make a
video call, depending on the
Camera key setting.p. 100
In Camera mode, take a photo
or record a video.
In the dialling screen, make a
video call.
Display
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Select
10
Back
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Icons1
Received signal strength
Accessing services in a
2.5G (GPRS) network;
when transferring data, this
icon animates
Accessing services in an
EDGE network; when
transferring data, this icon
animates
Accessing services in a 3G
(UMTS) network; when
transferring data, this icon
animates
Accessing services in a 3G+
(HSDPA) network; when
transferring data, this icon
animates
Roaming network
Voice call in progress
Out of your service area;
you cannot make or receive
voice calls
Video call in progress
Inbox full:
•
: SMS
•
: MMS
•
: E-mail
•
: Voicemail
•
: Push
•
: Configuration
message
Profile settingp. 98
•
: Normal
•
: Silent
•
: Driving
•
: Meeting
•
: Outdoor
•
: Offline
Battery power level
Get started
Out of your service area;
you cannot make or receive
video call
Memory card inserted
p. 25
Bluetooth active; When
transferring data, this icon
blinks red and bluep.
108
Connected with PC via a
USB port
Browsing Internet on PC
using the phone as modem
Connected to secured web
page
New message:
•
: SMS
•
: MMS
•
: E-mail
•
: Voicemail
•
: Push
•
: Configuration
message
1. Depending on your country or service provider,
the icons shown on the display may vary.
11
Get started
Access menu functions
Use the
soft keys
The roles of the soft keys vary
depending on the function you
are using. The bottom line of
the display indicates their
current role.
Select
Press the left
soft key to select
the highlighted
option.
Select an
option
2. Press the Navigation keys
to move to the next or
previous option.
3. Press <Select> or [OK]
to confirm the function
displayed or option
highlighted.
Back
4. To exit, choose either of
the following methods:
• Press <Back> to move
up one level.
• Press [ ] to return to
Idle mode.
Press the right
soft key to return
to the previous
menu level.
Use
shortcuts
12
1. Press a desired soft key.
Press the number key
corresponding to the option
you want.
Customise your phone
Display
language
2. Select a language.
3. Press <Save>.
Call ringer
melody
You can change the call
ringer by changing the
properties of the currently
active sound profile.
To change the profile
properties:
1. In Idle mode, press [OK]
and select Settings →
Phone profiles.
3. Press <Options> and
select Edit.
4. Select Voice call
ringtone and select a
ringtone for voice calls.
Get started
1. In Idle mode, press [OK]
and select Settings →
Phone settings →
Language → Screen
text.
5. Select Video call
ringtone and select a
ringtone for video calls.
6. Press <Options> and
select Save.
To change the sound profile:
1. In Idle mode, press [OK]
and select Settings →
Phone profiles.
2. Select the profile you
want.
2. Scroll to the sound profile
you are using.
13
Get started
Idle mode
Wallpaper
You can set a wallpaper for
the idle screen.
1. In Idle mode, press [OK]
and select Settings →
Display & light
settings → Display
settings → Wallpaper
→ Pictures → Images.
2. Scroll to an image folder.
3. Select an image.
4. Press <Set>.
Menu
shortcuts
You can set the Navigation
keys to function as shortcuts
to access your favourite
menus.
1. In Idle mode, press [OK]
and select Settings →
Phone settings →
Shortcuts.
2. Select a key.
3. Select a menu to be
assigned to the key.
14
Silent
profile
Phone lock
You can activate the Silent
profile to avoid disturbing
other people.
Press and hold [ ] in Idle
mode.
You can protect the phone
against unauthorised use
with a phone password. The
phone will require the
password on power-up.
1. In Idle mode, press [OK]
and select Settings →
Security → Change
phone password.
2. Enter a new 4- to 8-digit
password and press
<Confirm>.
3. Enter the new password
again and press
<Confirm>.
4. Select Phone lock.
5. Select On.
Answer a
call
Make/Answer calls
3. To end the call, press
[ ].
To make a voice call:
1. Enter an area code and
phone number.
2. Press [
Get started
2. For a video call, press
<Show me> to allow the
other person to see you.
6. Enter the password and
press <Confirm>.
Make a call
1. When the phone rings,
press [ ].
].
Adjust the
volume
during a call
Press [ / ].
3. To end the call, press
[ ].
To make a video call:
1. Enter an area code and
phone number.
2. Press [
].
3. To end the call, press
[ ].
15
Step outside the phone
Begin with your camera, the media player, the
web, and other special features
Record a
video
2. Press [1] to switch to
Record mode.
Use the camera
Take a
photo
3. Press [OK] or [
start recording.
1. Open the phone.
2. In Idle mode, press and
hold [
] to turn on the
camera.
5. Press < > or <Back>
to take another photo.
View a
photo
1. In Idle mode, press [OK]
and select My files.
2. Select the photo you
want.
16
] to
4. Press [OK] or [
] to
stop recording. The video
is saved automatically.
3. Aim the lens at the
subject and make any
desired adjustments.
4. Press [OK] or [
] to
take a photo. The photo
is saved automatically.
1. In Idle mode, press and
hold [
] to turn on the
camera.
5. Press <Back> to record
another video.
Play a video
1. In Idle mode, press [OK]
and select My files.
2. Select the video you
want.
Play music
Use these methods:
• Download from the
wireless webp. 49
• Download from a
computer using the
optional Samsung PC
StudioSamsung PC
Studio User’s Guide
• Receive via Bluetooth
p. 110
• Copy to a memory card
and insert the card into
the phonep. 25
Create a
play list
1. In Idle mode, press [OK]
and select Media player.
2. Scroll to the Music tab.
3. Press <Options> and
select Create playlist.
Step outside the phone
Copy media
files to the
phone
4. Enter the name for the
play list and press
<Options> and select
OK.
5. Select the play list you
just created.
6. Press <Options> and
select Add → Playlist or
Files.
7. Scroll to the play list you
want, or press [OK] to
select the files you want.
8. Press <Select> or
<Add>.
17
Step outside the phone
Play music
files
1. Select the file you want
to play.
2. During playback, use the
following keys:
• OK: pauses or
resumes playback.
• Up: opens the play
list.
• Left: returns to the
previous file. Moves
backward in a file
when held down.
• Right: skips to the
next file. Skips
forward in a file when
held down.
•
/ : adjusts the
volume.
3. Press [Down] to stop
playback.
18
Browse the web
Using a built-in web browser, you can easily
access the wireless web to get a variety of
up-to-date services and information and to
download web content.
Launch the
web
browser
Navigate
the web
In Idle mode, press [OK]
and select Internet → Go to
homepage.
•
•
•
•
To scroll through browser
items, press [Up] or
[Down].
To select an item, press
[OK].
To return to the previous
page, press <Back>.
To access options, press
<Options>.
Use Contacts
Add a
contact
To the phone’s memory:
2. Press <Options> and
select Add to Contacts
→ Phone → New → a
number type.
3. Specify contact
information: First name,
Last name, Display
name, Mobile-private,
Landline-private, Email,
Group, Caller ID,
Ringtone, and Memo.
1. In Idle mode, enter a
phone number.
2. Press <Options> and
select Add to Contacts
→ SIM → New.
Step outside the phone
1. In Idle mode, enter a
phone number.
To the USIM/SIM card:
3. Specify contact
information: Name,
Phone number, Group
(for USIM), and Location
number.
4. Press <Save>, or press
<Options> and select
Save to save the
contact.
4. Press <Options> and
select Save to save the
contact.
19
Step outside the phone
Find a
contact
1. In Idle mode, press [OK]
and select Contacts.
5. To send the name card,
press <Options> and
select Send my contact
details → a sending
method.
2. Enter the first few letters
of the name you want.
3. Select a contact from the
Contacts list.
4. Scroll to a number and
press [ ] to dial, or
press [OK] to edit
contact information.
Create and
send a
name card
1. In Idle mode, press [OK]
and select Contacts.
2. Press <Options> and
select My contact
details.
3. Specify your contact
information.
4. Press [OK] to save the
name card.
Send messages
Send a text
message
(SMS)
1. In Idle mode, press < >
and select Create new
message → Message.
2. Enter your message.
3. Press [UP] to move to the
recipient field.
4. Enter a destination
number.
To send the message to
more than one recipient,
press [Right] and enter
additional destination
numbers.
5. Press <Options> and
select Send to send the
message.
20
Send a
multimedia
message
(MMS)
1. In Idle mode, press
< > and select Create
new message →
Message.
2. Enter your message.
3. Press <Options> and
select Add subject.
4. Press <OK>.
10. Press <Options> and
select Send to send the
message.
5. Enter the message
subject and press [Down]
to move to the text field.
6. Press <Options> and
select Add item, Create
item, or Add
attachment.
7. Add a media file,
Contacts entry, calendar
item, or bookmark item.
8. Press [Up] until the
recipient field highlights.
Step outside the phone
9. Enter destination
numbers or e-mail
addresses.
To send the message to
more than one recipient,
press [Right] and enter
additional numbers or
e-mail addresses.
Send an
e-mail
1. In Idle mode, press
< > and select Create
new message → Email.
2. Enter the e-mail text.
3. Press <Options> and
select Add subject.
4. Enter the subject of the
e-mail.
21
Step outside the phone
Send an
e-mail
(continued)
5. Press <Options> and
select Add attachment
or Create item.
6. Add a media file,
Contacts entry, calendar
item, or bookmark item.
View messages
View a text
message
9. Press <Options> and
select Send to send the
e-mail.
1. Press <View>.
2. Select the message from
the Inbox.
From the Inbox:
7. Press [Up] until the
recipient field highlights.
8. Enter destination e-mail
addresses.
To send the e-mail to
more than one recipient,
press [Right] and enter
additional e-mail
addresses.
When a notification appears:
1. In Idle mode, press
< > and select Inbox.
2. Select an SMS message
( ).
View a
multimedia
message
When a notification appears:
1. Press <View>.
2. Select the message from
the Inbox.
From the Inbox:
1. In Idle mode, press
< > and select Inbox.
2. Select an MMS message
(
).
22
View an
e-mail
1. In Idle mode, press
< > and select Email
inbox.
Turn on
Bluetooth
2. Select My phone’s
visibility → On to allow
other devices to find your
phone.
3. Select an e-mail or
header.
4. If you selected a header,
press <Options> and
select Retrieve to view
the body of the e-mail.
Use Bluetooth
Your phone is equipped with Bluetooth
technology, enabling you to connect the
phone wirelessly to other Bluetooth devices
and exchange data with them, talk handsfree, or control the phone remotely.
Step outside the phone
2. Press <Options> and
select Download.
1. In Idle mode, press [OK]
and select Settings →
Network settings →
Bluetooth → Activation
→ On.
Search for
and pair
with a
Bluetooth
device
1. In Idle mode, press [OK]
and select Settings →
Network settings →
Bluetooth → My
devices → Search new
device.
2. Select a device.
3. Enter a Bluetooth PIN or
the other device’s
Bluetooth PIN, if it has
one, and press <OK>.
When the owner of the
other device enters the
same code, pairing is
complete.
23
Step outside the phone
Send data
1. Access an application,
Contacts, My files,
Calendar, Memo, or
Tasks.
2. Select the item you want
to send.
3. Press <Options> and
select Send contact
details/Send/Send via
→ Via Bluetooth/
Bluetooth.
Switch applications
You can switch to other applications from a
menu, without closing the menu screen you
were using.
Switch to an
application
2. Select an application.
Available
applications
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
<OK>.
Receive
data
1. When a device attempts
to access your phone,
press <Yes> to confirm
that you are willing to
receive.
2. If necessary, press
<Yes> to confirm that
you are willing to receive.
24
1. While using a menu,
press [ ].
•
•
•
Close all
running
applications
Call: opens the dialling
screen.
Messaging: accesses the
Messaging menu.
Internet: launches the
web browser.
1. Press [
].
2. Scroll to End all?.
3. Press <Yes>.
Use a memory card
•
You can use an optional microSD memory
card to increase your phone’s memory
capacity.
•
•
•
•
Frequent erasing and
writing will shorten a
card’s lifespan.
Do not remove a card
from the phone or turn
off the phone while data
is being accessed or
transferred. This could
result in loss of data and/
or damage to the card or
phone.
Do not subject cards to
strong shocks.
Do not touch card
terminals with your
fingers or metal objects.
If dirty, wipe the card
with a soft cloth.
Insert a
memory
card
Step outside the phone
Important
memory
card
information
•
Keep cards away from
small children or pets.
Do not expose cards in a
place subject to electrostatic discharge and/or
electrical noise.
1. Insert a memory card
into the memory card
slot, with the label side
face up.
2. Press the card until it
locks into place.
25
Step outside the phone
Remove the
memory
card
1. Press the memory card
so that it is disengaged
from the phone.
2. Remove the card from
the slot.
Use a card
adapter
Using a card adapter and a
USB card reader/writer, you
can read the card on a PC.
1. Insert a memory card
into a card adapter, and
then the adapter into a
card reader/writer.
2. Plug the USB connecter
of the card reader/writer
into the USB port on your
PC.
3. Access the appropriate
memory disk and copy to
and from the card.
26
Enter text
Pinyin, Stroke, ABC, T9, Number, and Symbol
modes
You can enter text in some features, such as
Messages, Contacts, or Organiser, by using
Pinyin and Stroke modes for Chinese, and T9
and ABC modes for English. You can also
enter numbers and symbols.
Changing the text input mode
•
•
•
Press the right soft key and select the
text input mode you want.
Press and hold [ ] to quickly switch to
Symbol mode.
Press and hold [ ] to quickly switch to
Number mode.
Using Chinese Pinyin mode
Pinyin is a system to enter Chinese words by
spelling them phonetically (how they sound)
using the Latin alphabet. With the Pinyin
input method, you can enter Chinese
characters by entering their Pinyin string
using the phone’s keypad.
Entering characters in Pinyin mode
1. Press the keys corresponding to the
phonetic spelling of the character you
want, referring to the letters printed on
the keys.
2. Press [Left] or [Right] to select
alternative pinyins for the keys you have
pressed.
3. If you cannot find the character you want
from the display, press [Up] or [Down] to
scroll through the word choices.
4. Press [1] to activate the character
selection field.
A number, from 1 to 5, is added to each
character.
5. Press the number key corresponding to
the character you want.
Other Pinyin mode operations
•
•
•
•
Press [ ] to insert a space.
Press [Left] or [Right] to move the
cursor.
Press [C] to delete characters one by
one.
Press and hold [C] to clear the entire
display.
27
Enter text
Using Chinese Stroke mode
keys in the order that you would write
the strokes, using one press per stroke.
This mode allows you to enter individual
Chinese strokes, in written order, from top to
bottom, and from left to right.
The Chinese strokes are classified into five
basic categories; heng, shu, pie, dian, and
zhe. The basic strokes are printed on keys
[1] to [5] on the keypad.
Refer to the following table:
Category
Key
Strokes in each category
If you are uncertain of the stroke order,
press [6] in place of each questionable
stroke. Continue entering strokes until
the character displays.
2. Press [Up] or [Down] to scroll through
the choices.
3. Press the corresponding key, [7] to [0],
to select a character and add it to your
text.
Rapid character entry
Entering strokes and characters in
Stroke mode
1. Press the keys corresponding to a
character’s component strokes. Press
When you enter a character, the phone
automatically displays words or phrases that
are frequently used with the entered
character in the character selection field.
This function allows you to enter phrases or
words with minimal key presses.
Other Stroke mode operations
•
•
•
28
Press [ ] to insert a space.
Press [Left] or [Right] to move the
cursor.
Press [C] to delete characters one by
one. Press and hold [C] to clear the
entire display.
Using ABC mode
•
Press the appropriate key until the character
you want appears on the screen.
•
Characters in order displayed
Upper case
Lower case
Enter text
Key
Press the Navigation keys to move the
cursor.
Press [C] to delete characters one by
one. Press and hold [C] to clear the
entire display.
Using T9 mode
T9 is a predictive text input mode that
allows you to enter any character using
single keystrokes.
Entering a word in T9 mode
Other ABC mode operations
•
•
To enter the same letter twice or to enter
a different letter on the same key, wait
for the cursor to move to the right
automatically or press [Right]. Then,
enter the next letter.
Press [ ] to insert a space.
1. Press [2] to [9] to start entering a word.
Press each key once for each letter.
For example, press [4], [3], [5], [5],
and [6] to enter Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that
you press.
2. Enter the whole word before editing or
deleting characters.
3. When the word displays correctly, go to
step 4. Otherwise, press [0] to display
alternative word choices for the keys
that you have pressed.
29
Enter text
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the
next word.
Other T9 mode operations
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the
cursor.
Press [C] to delete characters one by
one. Press and hold [C] to clear the
entire display.
Adding a new word to the T9
dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for
your key presses. When there are no
more alternative words, Spell displays
on the bottom line.
3. Press <Spell>.
30
4. Enter the word you want using ABC
mode and press <Add>.
Using Number mode
Number mode enables you to enter
numbers. Press the keys corresponding to
the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
scroll to a symbol
set
the Navigation keys
select a symbol
the corresponding
number key.
clear the entered
symbols
[C].
insert the symbols
<OK>.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and
phone number.
• Press [C] to delete the last digit or
press and hold [C] to clear the whole
display.
• Press and hold [ ] to enter a pause
between numbers.
2. Press [ ].
3. When you want to end the call, press
[ ].
Making an international call
1. In Idle mode, press and hold [0]. The +
character appears.
2. Enter the country code, area code, and
phone number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the
list of recent numbers.
2. Scroll to the number you want and press
[ ].
Making a call from Contacts
Once you have stored a number in Contacts,
you can dial the number by selecting it from
Contacts.p. 41
You can also use the speed dial feature to
assign your most frequently dialled numbers
to specific number keys.p. 106
You can quickly dial a number from the
USIM/SIM card using its location number
assigned when stored.
1. In Idle mode, enter a location number
and press [ ].
2. Scroll through other numbers, if
necessary.
3. Press <Call> or [ ] to make a voice
call, or <V-Call> or [
] to make a
video call.
31
Call functions
Answering a call
Using the headset
When you receive an incoming call, the
phone rings and displays the incoming call
image.
Use the headset to make or answer calls
without holding the phone.
Press <Accept> or [
] to answer the call.
Tips for answering a call
•
•
•
When Slide up in Slide settings is set
to Accept call, you can simply open the
phone.p. 101
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject a call or
mute the ringer, depending on the
Volume key function setting.p. 100
Viewing missed calls
If you have missed calls, the screen displays
how many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed
calls.
3. Press [ ] to dial the number you want.
32
Connect the headset to the jack on the right
side of the phone. The button on the
headset works as follows:
To
Press
redial the last call
and hold the button,
twice.
answer a call
the button.
end a call
and hold the button.
Options during a call
You can access a number of functions during
a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume
during a call.
Press [ ] to increase the volume level and
press [ ] to decrease the volume level.
Placing a call on hold/Retrieving
3. Press <Options> and select End →
Held call to end the call on hold.
4. To end the current call, press [ ].
Making a second call
Using the speakerphone feature
You can make another call if your network
supports this function.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the
calls.
4. Press <Options> and select End →
Held call to end the call on hold.
5. To end the current call, press [ ].
Use the phone as a speakerphone to talk
and listen with the phone a short distance
away.
Answering a second call
You can answer an incoming call while
already on the phone, if your network
supports this function and you have
activated the call waiting feature.p. 103
1. Press [ ] to answer the call. The first
call is automatically put on hold.
2. Press <Swap> to switch between the
calls.
Call functions
Press <Hold> to place a call on hold, or
press <Retrieve> to retrieve the call.
Press [OK] and then <Yes> to activate the
speakerphone feature. Press [OK] again to
switch back to the earpiece.
Using In-call options
During a call, press <Options> to access
the following options:
• Speaker on/Normal: turn on the
speakerphone feature or switch back to
Normal mode.
• Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit or back to the phone.
To use this feature, you first need to
connect your headset or car kit to the
phone.p. 109
33
Call functions
•
•
•
•
•
34
Whisper mode on/Whisper mode off:
turn on or off Whisper mode. Whisper
mode automatically increases the
microphone's sensitivity to allow the
other person to hear your voice even
though you may be whispering.
Join: set up a multi-party call by adding
a caller on hold to a currently active call.
You can include up to 5 people on a
multi-party call.
Split: have a private conversation with
one multi-party call participant. The
other participants can converse with
each other. After the private
conversation, select Join to return both
private participants to the multi-party
call.
Swap: switch between calls, if a call is
on hold.
Transfer: transfer the currently active
call to a caller on hold. The two callers
can talk to each other, but you are
disconnected from the call.
•
•
Hold/Retrieve: place a call on hold or
retrieve the call.
Mute: access the following muting
options:
Voice: switch off the phone's
microphone so that the other person on
the phone cannot hear you, or switch it
back on.
Keypad tones: turn the key tones off or
on.
To communicate with answering
machines or computerised telephone
systems, Keypad tones must be
deactivated.
•
•
•
New call: make a new voice call.
Create message: create a new SMS or
MMS message.
Send DTMF: send DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones
for tone dialling, sounding when you
press the number keys. This option is
helpful for entering a password or an
•
•
•
•
•
•
•
•
Using the video call feature
In a 3G (UMTS) service area, your phone
can make or receive a video call, allowing
you to see another person on the screen
during a conversation. The other person’s
phone must support the video call feature.
Call functions
•
account number when you call an
automated system, like a banking
service.
Contacts: locate or store contacts in
Contacts.
Add to Contacts: add the sender’s
number to Contacts.
View contact details: access the
contact information, if the caller is saved
in Contacts.
Calendar: keep track of your schedule.
Memo: create a memo.
Switch to video call: switch to a video
call.
End call/End: disconnect the call
currently on hold, active call, or all calls.
Call: make a voice call to the entered
numbers.
Save as memo: save the entered
numbers as a memo.
Making a video call
1. In Idle mode, enter the area code and
phone number.
2. Press [
].
Answering a video call
When you receive a video call, answer a
video call as receiving a voice call. Press
<Show me> to allow the caller to see you
via the camera.
Using video call options
During a video call, press <Options> to
access the following options:
• Normal/Speaker on: turn off or on the
speakerphone feature.
35
Call functions
•
•
•
•
•
•
•
36
Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit, or back to the phone.
To use this feature, you first need to
connect your headset or car kit to the
phone.p. 109
Whisper mode on/Whisper mode off:
turn on or off Whisper mode. Whisper
mode automatically increases the
microphone's sensitivity to allow the
other person to hear your voice even
though you may be whispering.
Outgoing image: set an image to be
displayed on the other person’s phone.
Mute: turn off the microphone, or key
tones.
Record video call/Stop recording:
start recording the current video call and
stop recording.
External camera/Internal camera:
switch between the front camera lens
and the rear camera lens.
Capture image: capture the image that
is displayed on the screen.
•
•
Display options: access the camera
settings for the video call.
Brightness: display the brightness
control bar and adjust the brightness by
pressing [Left] or [Right].
Effects: change the colour tone of the
image.
Quality: change the image quality.
Viewing style: select a view mode.
Zoom: display the zoom control bar and
zoom in or out by pressing [Up] or
[Down].
Hide caller ID/Show caller ID: hide or
display the caller’s phone number, or
name if saved in Contacts.
More options: access the following
options:
Contacts: locate or store contacts in
Contacts.
Create message: create a new SMS or
MMS message.
Message inbox: access the received
message list.
•
•
•
•
Send DTMF: send Dual tone multifrequency (DTMF) tones as a group after
entering the entire number you need to
send or retrieving a number from
Contacts.
Calendar: access the calendar to check
your schedule or enter new
appointments.
Memo: create a memo.
Switch to voice call: change the call to
a voice call.
Settings: change the default settings for
the video call feature.p. 104
Add to Contacts: save the entered
numbers to Contacts.
Save as memo: save the entered
numbers as a memo.
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, and the length
of the calls. You can also check the cost of
your calls, if your USIM/SIM card supports
this function.
To access this menu, press [OK] in Idle
mode and select Call log.
Accessing a call log
You can access the most recent calls dialled,
received, or missed.
1. Press [Left] or [Right] to move to
another call type.
2. Press [Up] or [Down] to scroll through
the call list.
3. Press [OK] to view the details of a call,
or press [ ] to dial a number.
37
Menu functions
Using call log options
While viewing call details, press <Options>
to access the following options:
• Voice call: make a voice call to the
number.
• Video call: make a video call to the
number, if the 3G service is available.
• Save contact to: save the number to
Contacts.
• Create message: send an SMS or MMS
message to the selected number.
• Delete: delete the selected call log or all
logs.
• Add to reject list: add the number to
the Auto reject list so that you can reject
calls from that number.
• View contact details: access contact
information, if the number is saved in
Contacts.
Viewing the data counter
From the call log list, press <Options> and
select Call manager → Data counter to
38
view the total amount of sent or received
data.
The following counters are available:
• Total sent: check the total amount of
data you have sent.
• Total received: check the total amount
of data you have received.
To reset a counter or all of the counters,
press <Options> and select Reset or
Reset all.
If the phone is locked, it will require the
password. You can change this password.
p. 105
Viewing call cost
From the call log list, press <Options> and
select Call manager → Call costs to view
the cost of calls. This option is available only
if supported by your USIM/SIM card. Note
that this is not intended to be used for billing
purposes.
The following counters are available:
• Total costs: check the total cost of all
your calls. If the total cost exceeds the
•
•
•
•
Total dialled: check the total length of
voice calls dialled.
Total received: check the total length
of voice calls received.
Total video calls dialled: check the
total length of video calls dialled.
Total video calls received: check the
total length of video calls received.
To reset a counter or all of the counters,
press <Options> and select Reset or
Reset all.
Contacts (Menu 2)
Press <Options> to access the following
options:
• Reset call cost: reset the cost counters.
• Edit cost limit: set the maximum cost
authorised for your calls.
• Setup currency: set the currency that
is applied when the cost of your call is
calculated.
•
Menu functions
•
maximum cost set in Edit cost limit,
you must reset the counter before you
can make another call.
Last call cost: check the cost of your
last call.
Cost limit: check the maximum cost
set.
If the phone is locked, it will require the
password. You can change this password.
p. 105
Viewing call time
Contacts
From the call log list, press <Options> and
select Call manager → Call times to view
the time log for calls made and received.
The actual time invoiced by your service
provider will vary.
You can store phone numbers on your USIM/
SIM card and in your phone’s memory. The
USIM/SIM card and phone’s memory are
physically separate, but they are used as a
single entity called Contacts.
The following counters are available:
To access this menu, press [OK] in Idle
mode and select Contacts.
(Menu 2)
39
Menu functions
Storing a new contact
You can add a new contact to Contacts.
Storing a contact in the phone’s
memory
1. Scroll to the Contacts tab.
2. Press <Options> and select Add
contact → Phone.
3. Change the settings or enter information
about the contact.
• First name/Last name: assign a
name.
• Display name: assign a display
name.
• Mobile-private: add a phone
number.
• Landline-private: enter a fixed
phone number.
• Email: assign an e-mail address.
• Group: assign a caller group.
• Caller ID: assign a caller ID image.
• Ringtone: assign a ringtone to alert
you to a call from the person.
• Memo: enter the additional note of
the person.
40
4. If necessary, press <Options> to access
the following options:
• Change type: change the selected
number type.
• Add more fields: add an additional
category to the contact.
• Delete field: remove the selected
category from the contact.
5. Press <Options> and select Save to
save the contact.
Storing a contact on the USIM/SIM
card
1. Scroll to the Contacts tab.
2. Press <Options> and select Add
contact → SIM.
3. Change the settings or enter information
about the contact.
• Name: assign a name.
• Phone number: enter a phone
number.
• Group: (for USIM) assign a caller
group.
• Location number: assign a location
number.
Adding a contact to the FDN list
Phone number: enter a phone
number.
• Location number: assign a location
number.
5. Press <Options> and select Save to
save the contact.
You can add ? in a place where number is
not fixed by pressing <Options> and
selecting Enter Wildcard.
Finding a contact
Contacts (Menu 2)
You can create a list of contacts to be used
in FDN (Fixed Dialling Number) mode, in
which the phone allows outgoing calls only
to the specified phone numbers, if your
USIM/SIM card supports this feature.
1. Scroll to the FDN tab, or press
<Options> and select FDN contacts.
2. Press <Options> and select Create
FDN contact.
3. Enter the PIN2 and press <Confirm>.
4. Change the settings or enter information
about the contact:
• Name: assign a name.
•
Menu functions
4. If you are using a USIM card, press
<Options> to add additional
information:
• Add more fields: add an additional
category to the contact.
• Delete field: remove the selected
category from the contact.
5. Press <Save>, or press <Options> and
select Save to save the contact.
You can search for numbers in Contacts.
1. Scroll to the Contacts tab.
2. Enter the first few letters of the name
that you want to find.
3. Select the contact you want from the
Contacts list.
4. Scroll to a number and press [ ] to dial
or [OK] to edit the contact information.
Using contact options
While viewing the contact list, press
<Options> to access the following options:
• View: access contact information.
41
Menu functions
•
•
•
•
•
•
•
•
•
•
•
Add contact: add a new contact in
Contacts.
Voice call: make a voice call.
Video call: make a video call.
Create message: send an SMS
message, MMS message, or e-mail.
Edit: edit contact information.
Duplicate: make a copy of the contact.
Delete: delete the currently selected
contact or the contacts you want.
Save to My files: save the contact as a
name card format in the Other files
folder.
Send contact details: send the contact
details via MMS, e-mail, or Bluetooth.
My contact details: access your name
card.
Assign speed dial: assign a speed dial
number. If the selected contact has more
than one phone number, the speed dial
number is assigned to the first saved
number by default.
•
•
•
•
•
•
•
42
Copy to phone/Copy to SIM: copy the
selected contact or the contacts you
want to the phone’s memory or the
USIM/SIM card.
Move to phone/Move to SIM: move
the selected contact or the contacts you
want to the phone’s memory or the
USIM/SIM card.
Service number: display the list of
Service Dialling Numbers (SDN) assigned
by your service provider, including
emergency numbers, directory enquiries,
and voicemail server number. This option
is available only when supported by your
USIM/SIM card.
FDN contacts: display the FDN contact
list.
Copy to FDN contacts: copy the
selected contact to the FDN contact list.
Print via Bluetooth: print contact
information via a Bluetooth-compatible
printer. Some printers may not be
compatible with the phone.
Contact settings: change the default
settings for Contacts.p. 106
•
•
Memory status: check the number of
contacts you have stored in the phone’s
memory and on the USIM/SIM card.
Back: go back to the previous screen.
You can organise your contacts in caller
groups.
Creating a caller group
Adding members to a caller group
1. Select a group.
2. Press <Options> and select Add
member.
3. Press [OK] to select the contacts you
want and then press <Options> and
select Add.
Media player
Media player (Menu 3)
1. Scroll to the Groups tab.
2. Press <Options> and select Create
group.
3. If you are using a USIM card, select a
location.
4. Enter a name for the group and press
<Options> and select Save.
While viewing the group list, press
<Options> to access the following options:
• View: display the members of the
selected group.
• Create group: add a new group.
• Create message: send an SMS
message, MMS message, or e-mail.
• Delete: delete the selected group.
Group members, however, will not be
deleted from Contacts.
• Rename: change the group name.
• Group settings: assign an image and
ringtone to the selected group in the
phone’s memory.
Menu functions
Organising contacts in a group
Managing caller groups
(Menu 3)
You can play music and video files.
To access this menu, press [OK] in Idle
mode and select Media player.
43
Menu functions
Downloading or receiving music or
video files
You can play the following types of files on
your phone.
• Music: MP3, AAC, 3GA, M4A
• Video: 3GP, MP4
Use the following methods to save music or
video files to your phone’s memory or a
memory card:
• Download from the wireless webp. 49
• Download from a computer using
Samsung PC StudioSamsung PC
Studio User’s Guide
• Receive via an active Bluetooth
connectionp. 110
• Copy to a memory card and insert the
card into the phonep. 25
Playing music files
Using the Media player, play music files. To
enjoy high quality music, you can use an
optional Bluetooth stereo headset.
Bluetooth mono headsets are not compatible
with the media player.
44
Creating a music play list
1. Scroll to the Music tab.
2. Press <Options> and select Create
playlist.
3. Enter a name for the play list and press
<Save>.
4. Select the play list you just created.
5. Press <Options> and select Add →
Playlist or Files.
6. For Playlist, select the play list you
want.
For Files, press [OK] to select the files
you want and press <Add>.
Playing a music file
1. From the play list screen, press
<Options> and select Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to
use a Bluetooth stereo headset, and then
search for and connect the phone to the
headset.
During playback, use the following keys:
OK
Pauses or resumes playback.
Up
Opens the play list.
Left
Returns to the previous file.
Moves backward in a file when
held down.
Right
Skips to the next file. Skips
forward in a file when held down.
Down
Stops playback.
/
Adjusts the volume.
1
Turns 3D sound on or off. This
option is only available when a
headset is connected.
3
Changes the repeat mode.
6
Sets the music player to play
tracks in random order.
From the music player screen, press
<Options> to access the following options:
• Pause/Resume: pause or resume
playback.
• Stop: stop playback.
• Play via: play the selected file via the
phone speaker or a Bluetooth stereo
headset.
• Transfer to Bluetooth stereo
headset/Transfer to phone: play the
selected file via the phone speaker or a
Bluetooth stereo headset.
• Open playlist: open the play list.
• Jump to track time: specify a point in a
file you would like to move to.
• Details: access the file properties.
• Settings: change the default settings for
playing music files:
Repeat: select a repeat mode.
Shuffle: set the music player to play
tracks in random order.
3D sound: turn 3D sound on or off. This
option is only available when a headset is
connected.
Media player (Menu 3)
Function
Menu functions
Key
Using music player options
45
Menu functions
Visualization type: select a playback
animation.
Volume: select a volume level.
Using play list options
On the Media player screen, press
<Options> to access the following options:
• Open: open the selected play list.
• Play via: play the music files stored in
the selected play list via the phone
speaker or a Bluetooth stereo headset.
• Create playlist: add a new play list.
• Rename: change the name of the play
list.
• Delete: delete the selected play list or
all play lists.
• Player settings: change the default
settings for playing music files:
Repeat: select a repeat mode.
Shuffle: set the music player to play
tracks in random order.
3D sound: turn 3D sound on or off. This
option is only available when a headset is
connected.
46
•
Visualization type: select a playback
animation.
Volume: select a volume level.
Show controller: set the music player
to display or hide the controller.
VOD settings: select a connection
profile to be used for accessing a video
streaming server. You can also create or
edit a profile.p. 112
Using music file options
1. On the Media player screen, select a play
list.
2. Press <Options> to access the following
options:
• Play via: play the selected file via
the phone speaker or a Bluetooth
stereo headset.
• Add: add a new play list or music
files to the play list.
• Move track in playlist: move the
selected file to the position you want
within the play list.
• Add to playlist: add the selected file
or the files you want to another play
list.
•
•
•
•
Downloading music files
1. Select All music.
2. Select More music. You car connected
to the preset website by your service
provider.
3. Search for the file you want and follow
the onscreen instructions to download it.
Playing video clips
1. From the Media player screen, scroll to
the Video tab.
2. Select a file. The video player opens and
the video plays.
During playback, use the following keys:
Key
Function
OK
Pauses or resumes playback.
Left
Returns to the previous file.
Moves backward in a file when
held down.
Right
Skips to the next file. Skips
forward in a file when held down.
/
Media player (Menu 3)
•
Playing a video clip
Menu functions
•
List by: change the sort order of the
list.
Send via: send the file via MMS,
e-mail, or Bluetooth.
Set as: set the file as a ringtone for a
voice call or video call, or as a
ringtone for a Contacts entry.
Lock/Unlock: lock the file to prevent
it from being moved, deleted, and
renamed or unlock the file.
Remove: remove the selected file or
all files from the play list.
Details: access the file properties.
Adjusts the volume.
Down
Stops playback.
3
Changes the repeat mode.
6
Sets the video player to play
tracks in random order.
Using the Media player, you can play video
clips.
47
Menu functions
Using video player options
From the video player screen, press
<Options> to access the following options:
• Pause/Resume: pause or resume
playback.
• Stop: stop playback.
• Play: play the file.
• Jump to track time: specify a point in a
file you would like to move to.
• Show controller/Hide controller: set
the video player to display or hide the
controller.
• Details: access the file properties.
• Settings: change the default settings for
playing video files:
Repeat: select a repeat mode.
Shuffle: set the video player to play files
in random order.
Volume: select a volume level.
Show controller: set the video player
to display or hide the controller.
48
•
Horizontally: rotate the file 90 degree
and play it on a full screen. To return to
the normal screen, press the right soft
key.
Using video file options
From the file list, press <Options> to
access the following options:
• Play: play the selected file.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
• Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed or unlock the file.
• Details: access the file properties.
Downloading video files
1. Select More videos. You car connected
to the preset website by your service
provider.
2. Search for the file you want and follow
the onscreen instructions to download it.
Internet
Using browser options
(Menu 4)
To access this menu, press [OK] in Idle
mode and select Internet.
Go to homepage (Menu 4.1)
Navigating the web browser
To
Press
scroll through
browser items
[Up] or [Down].
select a browser
item
[OK] or <Select>.
return to the
previous page
<Back>.
Internet (Menu 4)
Use this menu to connect your phone to the
network and load the homepage of the
wireless web service provider.
From any web page, press <Options> to
access the following browser options:
• Go to: go to the currently linked web
page.
• Go: move backward or forward through
pages in history.
• Reload: reload the current page with
updated information.
• Desktop view/Smart-fit view: change
the display mode of the browser.
• Page Size: change the page size.
• Go to homepage: return to the
homepage.
• Add to Bookmarks: bookmark the
current page.
• View bookmarks: access the bookmark
list.
• Send URL: send the URL of the current
page as a data file via MMS, e-mail, or
Bluetooth.
• Enter URL: enter a URL address
manually.
Menu functions
The web browser on your phone allows you
to access the wireless web. Using the web
browser, you can access up-to-date
information and a wide variety of media
contents, such as wallpapers, ringtones, and
music files.
49
Menu functions
•
•
•
•
•
50
Copy URL: send the URL address of the
web page by adding it to the message
text via SMS, MMS, or e-mail.
Save: save the image of the current web
page or the current page.
Saved pages: access the list of web
pages you have saved.
History: access the list of web pages
you have accessed.
Advanced: change the various settings
for the browser.
Clear cache: clear the cache. The cache
is a temporary memory site that stores
recently accessed web pages.
Empty cookies: delete cookies. Cookies
are pieces of personal information sent
to a web server while navigating the
web.
Cookie options: set whether or not
cookies are stored. If you select
Prompt, the phone will ask you to save
the cookies of the current page.
Preferences: change the settings for
the web browser to suit your preference.
Certificates: access certificate
information.
Page details: access the page
properties.
Browser settings: select a connection
profile to be used for connecting to the
Internet. You can also create or edit a
profile.p. 112
About browser: access version and
copyright information about the browser.
Exiting the web browser
Press [ ] to end the network connection
and exit the browser.
Enter URL (Menu 4.2)
Use this menu to manually enter a URL
address and access the associated web
page.
You can add the entered URL to the
bookmark list by selecting Add bookmark.
Bookmarks (Menu 4.3)
•
Use this menu to save URL addresses in
order to quickly access web pages, or access
the preset bookmarks.
•
1. Press <Options> and select Add
bookmark.
2. Enter a title and press [Down].
3. Enter a URL address and press <Save>.
From the bookmark list, press <Options>
to access the following options:
• Go to: access the bookmarked web
page.
• Enter URL: enter a URL address
manually.
• Edit bookmark: edit the URL address
and title of the bookmark, if you selected
an added one.
• Add bookmark: add a new bookmark.
• Send URL: send the URL address of the
bookmark as a data file via MMS, e-mail,
or Bluetooth.
Saved pages (Menu 4.4)
You can access the list of pages you have
saved. Select a page name from the list to
access the corresponding web page.
Internet (Menu 4)
Using bookmark options
•
Menu functions
Adding a new bookmark
Copy URL: send the URL address of the
bookmark by adding it to the message
text via SMS, MMS, or e-mail.
Save to My files: save the URL address
as a data file in the Other files folder.
Delete: delete the selected bookmark or
all bookmarks, except for the preset
ones.
From the saved page list, press <Options>
to access the following options.
• View: access the selected web page.
• Rename: change the saved page name.
• Delete: delete the selected web page or
all pages.
History (Menu 4.5)
You can access the list of pages you have
accessed. Select a URL from the list to
access the corresponding web page.
51
Menu functions
From the history list, press <Options> to
access the following options:
• Go to: access the selected web page.
• Delete: delete the selected web page or
all pages.
• Details: access the properties of the
web page.
•
About browser: access version and
copyright information about the browser.
Browser settings (Menu 4.7)
Use this menu to select a connection profile
to be used for connecting to the Internet.
You can also create or edit a profile.
p. 112
Advanced (Menu 4.6)
You can access the advanced browser
options.
• Clear cache: clear the cache. The cache
is a temporary memory site that stores
recently accessed web pages.
• Empty cookies: delete cookies. Cookies
are pieces of personal information sent
to a web server while navigating the
web.
• Cookie options: set whether or not
cookies are stored. If you select
Prompt, the phone will ask you to save
the cookies of the current page.
• Preferences: change the settings for
the web browser to suit your preference.
52
Messaging
(Menu 5)
Use the Messaging menu to send and
receive text messages, multimedia
messages, and e-mails. You can also access
push messages, voicemails, broadcast
messages, and configuration messages.
To access this menu, press [OK] in Idle
mode and select Messaging.
You can quickly access this menu by
pressing < > in Idle mode.
Create new message (Menu 5.1)
Use this menu to create and send text
messages, multimedia messages, or
e-mails.
Message (Menu 5.1.1)
You can create and send text messages and
multimedia messages.
Creating and sending an SMS message
Short Message Service (SMS) allows you to
send or receive text messages.
1. Enter your message.
• You can use various message
composing options by pressing
<Options> in each field.
next section
• If you add a media file, subject or text
to the message or use the Change to
MMS option, you can send the
message via MMS.
2. When you have finished, Press
<Options> and select OK.
Using options while composing an SMS
message
While composing a message, press
<Options> to access the following options:
• Edit: edit the message.
• Send: send the message.
• Text: highlight the text you want and
cut, copy, or remove it.
• Insert: insert a text template, emoticon,
Contacts entry, or bookmarked URL
address into text.
• Add recipients: add destination
numbers to the message.
• View recipient list: view the added
destination numbers.
• Change to MMS: send the message via
MMS.
Messaging (Menu 5)
The maximum number of characters allowed
in a short message varies by Operator. If
your message exceeds the maximum
number of characters, the phone will split
the message.
Menu functions
If you add data or subject to a text message
while composing, the phone will
automatically send the message via MMS.
3. Press [Up] to move to the recipient field.
4. Enter a destination number.
To send the message to more than one
recipient, press [Right] and enter
additional numbers.
5. Press <Options> and select Send to
send the message.
53
Menu functions
•
•
•
Sending options: change the message
settings.p. 65
Save to Drafts: save the message in
the Drafts folder.
Save as template: save the message in
the Text templates folder.
Creating and sending an MMS message
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and sound, from phone to
phone or from phone to e-mail.
1. Enter your message.
You can use various message composing
options by pressing <Options> in each
field.next section
2. Press <Options> and select Add
subject.
3. Press <OK> to send the message via
MMS.
4. Enter the message subject and press
[Down] to move to the text field.
5. Press <Options> and select Add item,
Create item or Add attachment.
54
6. Add a media file, Contacts entry,
calendar item, or bookmark item to the
message.
Depending on the file type or DRM
(Digital Rights Management) system,
some files may not be able to be
forwarded.
7. When you have finished, press [Up] until
the recipient field highlights.
8. Enter a phone number or e-mail address.
To send the message to more than one
recipient, press [Right] and enter
additional numbers or e-mail addresses.
9. Press <Options> and select Send to
send the message.
Using options while composing an MMS
message
While composing a message, press
<Options> to access the following options:
• Edit: edit the message.
• Send: send the message.
• Add recipients: add destination
numbers or e-mail addresses to the
message.
•
•
•
•
•
•
•
•
•
•
•
•
Edit style: change the page properties.
Add subject: add the message subject.
Remove subject: remove the message
subject.
Sending options: change the message
sending settings.p. 65
Save to Drafts: save the message in
the Drafts folder.
Save as template: save the message in
the MMS templates folder.
Email (Menu 5.1.2)
Messaging (Menu 5)
•
•
•
•
Menu functions
•
View recipient list: view the added
destination numbers or e-mail
addresses.
Preview: view the message as it will be
shown on the recipient’s phone.
Text: highlight the text you want and
cut, copy, or remove it.
Add item: add a file stored in the My
Files folder.
Add attachment: add a media file,
Contacts entry, calendar item, or
bookmark item in data attachment
format.
Create item: take a photo, record a
sound or a video and add it to the
message.
Insert: insert a text template, emoticon,
Contacts entry, or bookmarked URL
address into text.
View attachment: view the list of the
files you added.
Change to SMS: send the message via
SMS.
Add page: add a new page.
Delete page: delete the selected page.
You can send and receive e-mails that
include text, audio, and images. To use this
feature, you need to subscribe to an e-mail
service and set up your e-mail account.
p. 68
Creating and sending an e-mail
1. Enter your message.
You can use various message composing
options by pressing <Options> in each
field.next section
2. Press <Options> and select Add
subject.
3. Enter the subject of the e-mail.
55
Menu functions
4. Press <Options> and select Add
attachment or Create item.
5. Add a media file, Contacts entry,
calendar item, or a bookmark item to the
message.
Depending on the file type or DRM
(Digital Rights Management) system,
some files may not be able to be
forwarded.
6. When you have finished, press [Up] until
the recipient field highlights.
7. Enter an e-mail address.
To send the e-mail to more than one
recipient, press [Right] and enter
additional e-mail addresses.
8. Press <Options> and select Send to
send the e-mail.
56
•
•
•
•
•
•
•
•
Using options while composing an
e-mail
•
While composing an e-mail, press
<Options> to access the following options:
• Write: add the message subject or text.
• Send: send the e-mail.
•
Text: highlight the text you want and
cut, copy, or remove it.
Add recipients: add destination e-mail
addresses to the e-mail.
View recipient list: view the added
destination e-mail addresses.
Attachment: open or remove the
attached item.
Add subject: add the e-mail subject.
Remove subject: remove the e-mail
subject.
Add attachment: add a media file,
Contacts entry, calendar item, or
bookmark item in data attachment
format.
Create item: take a photo or record a
sound or a video, and add it to the
e-mail.
Insert: insert a text template, emoticon,
Contacts entry, or bookmarked URL
address into text.
Sending options: change the e-mail
sending options.p. 67
•
•
Save to Drafts: save the e-mail in the
Drafts folder.
Save as text template: save the e-mail
in the Text templates folder.
This folder stores all types of messages you
have received, except for e-mails.
Viewing a message
Using message options
While viewing a message, press <Options>
to access the following options:
Messaging (Menu 5)
The following icons may appear on the list to
show the message type:
•
SMS message
•
MMS message
•
MMS notification
•
Push message from web servers
•
Configuration message, containing
network parameters from your
service provider
•
Broadcast message from your
service provider
USIM/SIM
• Depending on the DRM (Digital Rights
Management) system, messages having
web content may not be able to be
forwarded.
• A ! icon next to a message means that the
message is of high priority. A greycoloured message icon indicates low
priority.
Menu functions
Inbox (Menu 5.2)
•
SMS messages
• Voice call: make a voice call to the
selected number.
• Video call: make a video call to the
selected number, if the 3G service is
available.
• Go to URL: connect to the URL in the
message.
• Add to: add the highlighted web link to
Contacts or the bookmark list.
• Add to Contacts: save the sender’s
phone number or the selected number to
Contacts.
57
Menu functions
•
•
•
•
•
•
•
•
•
•
58
Add to Bookmarks: save the selected
web link to the bookmark list.
Create message: send an SMS or MMS
message to the selected number, or an
MMS message or e-mail to the selected
e-mail address.
Reply: send a reply to the sender.
Forward: forward the message to other
people.
Call sender: call to the message sender.
Delete: delete the message.
Move to SIM/Move to phone: move
the message between the phone’s
memory and the USIM/SIM card.
Move to My folder: move the selected
message to the My folder.
Print via Bluetooth: print the message
via a Bluetooth-compatible printer. Some
printers may not be compatible with the
phone.
Lock/Unlock: lock the message to
prevent it from being deleted, moved,
and sent or unlock the file.
MMS messages
• Retrieve: retrieve the message from the
server.
• Voice call: make a voice call to the
selected number.
• Video call: make a video call to the
selected number, if the 3G service is
available.
• Go to URL: connect to the URL in the
message.
• Add to Bookmarks: save the selected
web link to the bookmark list.
• Add to: add the highlighted web link to
Contacts or the bookmark list.
• Create message: send an SMS or MMS
message to the selected number, or an
MMS message or e-mail to the selected
e-mail address.
• Play: open the selected attachment.
• Reply: send a reply to the sender.
• Reply to all: reply to the sender and all
of other recipients.
• Forward: forward the message to other
people.
•
•
•
•
•
•
•
•
Configuration messages
• Install: apply the configuration specified
in the message to your phone.
• Delete: delete the message.
• Move to My folder: move the selected
message to the My folder.
Broadcast messages
• Voice call: make a voice call to the
selected number.
• Video call: make a video call to the
selected number, if the 3G service is
available.
• Go to URL: connect to the URL in the
message.
• Add to Bookmarks: save the selected
web link to the bookmark list.
• Add to: add the highlighted web link to
Contacts or the bookmark list.
• Create message: send an SMS or MMS
message to the selected number, or an
Messaging (Menu 5)
•
printers may not be compatible with the
phone.
Menu functions
•
•
Call sender: call to the message sender.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Delete: delete the message.
Move to My folder: move the selected
message to the My folder.
Save as template: save the message
as a template.
Save items: save media content from
the message to the phone’s memory.
Add to Contacts: save the selected
number or e-mail address to Contacts.
Lock/Unlock: lock the message to
prevent it from being deleted, moved,
and sent or unlock the file.
Details: access the message properties.
Print via Bluetooth: print the message
via a Bluetooth-compatible printer. Some
59
Menu functions
•
•
•
MMS message or e-mail to the selected
e-mail address.
Save: save the message to the phone’s
memory.
Add to Contacts: save the selected
number or e-mail address to Contacts.
Delete: delete the message.
Push messages
• Go to URL: connect to the URL specified
in the message.
• Delete: delete the message.
• Move to My folder: move the selected
message to the My folder.
Email inbox (Menu 5.3)
This folder stores e-mails that you have
received.
Viewing received e-mails
1. Press <Options> and select Download.
The phone checks the e-mail server and
downloads new e-mails.
2. Select an e-mail or a header.
60
3. If the e-mail has more than one page,
press [ / ] to scroll through pages one
by one.
4. Select an attached file to view or play it.
Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
Using e-mail options
While viewing the e-mail or header, press
<Options> to access the following options:
• Retrieve: retrieve the body of the
e-mail from the e-mail server.
• Voice call: make a voice call to the
selected number.
• Video call: make a video call to the
selected number, if the 3G service is
available.
• Go to URL/Go to RTSP: connect to the
URL in the message.
• Create message: send an SMS or MMS
message to the selected number, or an
MMS message or e-mail to the selected
e-mail address.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Register to Memo: register the
selected memo to Memo.
Register to Tasks: register the selected
task item to Tasks.
Move to My folder: move the selected
e-mail to the My folder.
Block: add the sender’s e-mail address
or the e-mail subject to the blocking list.
Print via Bluetooth: print the e-mail
via a Bluetooth-compatible printer. Some
printers may not be compatible with the
phone.
Details: access the e-mail properties.
Lock/Unlock: lock the message to
prevent it from being deleted, moved,
and sent or unlock the file.
Messaging (Menu 5)
•
•
Menu functions
•
•
Add to: add the highlighted web link to
Contacts or the bookmark list.
Add to Contacts: save the selected
number or e-mail address to Contacts.
Reply: send a reply to the sender.
Reply to all: reply to the sender and all
of other recipients.
Forward: forward the e-mail to other
people.
Delete: delete the selected e-mail from
the phone’s memory or from both the
phone’s memory and the e-mail server.
View/Play: view or open an attached
file.
Save items: save media content from
the e-mail to the phone’s memory.
Register to Contacts: register the
selected name card to a Contact entry.
Register to Calendar: register the
selected calendar item to Calendar.
Register to Bookmarks: register the
selected bookmark item to the bookmark
list.
Drafts (Menu 5.4)
This folder stores messages you have saved
to send them at a later time.
From the message list, press <Options> to
access the following options:
• Edit: edit the selected message.
61
Menu functions
•
•
•
•
•
•
•
Send: send the message.
Preview: preview the message.
Delete: delete the selected message or
the messages you want.
Move to My folder: move the selected
message or the messages you want to
the My folder.
Sort by: change the sort order of the
message list.
Lock/Unlock: lock the message to
prevent it from being deleted, moved,
and sent or unlock the file.
Details: access the message properties.
Outbox (Menu 5.5)
This folder stores messages that the phone
is attempting to send or has failed to send.
The following icons on the message list
indicates the sending status:
•
Being sent
•
Failed to be sent
From the message list, press <Options> to
access the following options:
• View: open the selected message.
62
•
•
•
•
•
•
Send again: resend the message.
Edit: edit the message.
Delete: delete the selected message or
the messages you want.
Sort by: change the sort order of the
message list.
Lock/Unlock: lock the message to
prevent it from being deleted, moved,
and sent or unlock the file.
Details: access the message properties.
Sentbox (Menu 5.6)
This folder stores messages that you have
sent.
From the message list, press <Options> to
access the following options:
• View: open the selected message.
• Forward: forward the message to other
people.
• Delete: delete the selected message or
the messages you want.
• Move to SIM/Move to phone: move
the message between the phone’s
memory and the USIM/SIM card.
•
•
•
My folder (Menu 5.7)
Creating a new folder
1. Press <Options> and select Create
folder.
2. Enter a folder name, and then press
<Options> and select OK.
Using folder options
From the folder list, press <Options> to
access the following options:
• Open: open the selected folder.
•
Create folder: add a new folder.
Rename folder: change the folder
name.
Delete folder: delete the selected
folder.
Templates (Menu 5.8)
Use this menu to create, edit, and send SMS
templates and MMS templates.
MMS templates (Menu 5.8.1)
You can create MMS templates so that you
can use them in composing an MMS
message.
Messaging (Menu 5)
This folder stores message that you have
moved to this folder using the Move to My
folder option while viewing a message list.
•
•
Menu functions
•
Move to My folder: move the selected
message or the messages you want to
the My folder.
Sort by: change the sort order of the
message list.
Lock/Unlock: lock the message to
prevent it from being deleted, moved,
and sent or unlock the file.
Details: access the message properties.
Creating a template
1. Press <Add new>, or press <Options>
and select Add new, if one has been
already stored.
2. Create a template as you would when
creating an MMS message.
3. Press <Options> and select Save as
template to save the template.
63
Menu functions
Using template options
From the template list, press <Options> to
access the following options:
• View: open the selected template.
• Send: send the selected template via
MMS.
• Add new: add a new template.
• Edit: edit the selected template.
• Delete: delete the selected template or
all templates.
Text templates (Menu 5.8.2)
You can create SMS templates with the
sentences you use frequently so that you
can retrieve and insert them when
composing an SMS message.
Creating a template
1. Press <Add new>, or press <Options>
and select Add new, if one has been
already stored.
2. Enter a message and press [OK].
Using template options
From the template list, press <Options> to
access the following options:
64
•
•
•
•
Send: create and send a new message
using the template via SMS, MMS, or
e-mail.
Add new: add a new template.
Edit: change the selected template.
Delete: delete the selected template or
all templates.
Delete all (Menu 5.9)
Use this menu to delete messages in each
message type at once.
1. Press [OK] to select the message types
to be cleared.
Pressing [Right] displays the message
types so that you can specify the ones to
be cleared.
2. Press <Delete>.
3. Press [OK] to remove the check mark
from the message types.
4. Press <Yes> to confirm the deletion.
Messaging settings (Menu 5.0)
Use this menu to set up various options for
using messaging services.
SMS (Menu 5.0.1)
Default type: set the default message
type. The network can convert messages
into the selected format.
Name: enter a profile name.
MMS (Menu 5.0.2)
Menu functions
You can configure MMS settings.
• Sending options: set up the options for
sending MMS messages:
Priority: set the priority level of
messages.
Expiration: set the length of time your
messages are stored in the MMS server.
Delivery: set a time delay before
messages are sent.
Hide address: set your address to be
hidden from the recipient’s phone.
Request delivery report: set the
network to inform you when your
messages have been delivered.
Request read report: send a readreply request along with your messages.
Keep a copy: leave copies of your
messages in the Sentbox folder after
sending.
Messaging (Menu 5)
You can configure SMS settings.
• Common settings: set up the options
for sending SMS messages:
Network selection: select Circuit
switch or Packet switch.
Reply path: allow recipients to reply to
you through your SMS server.
Delivery report: set the network to
inform you when your message have
been delivered.
Keep a copy: leave the copies of your
messages in the Sentbox folder after
sending.
• SMS centre settings: select a profile to
be used for SMS or set up the SMS
server. Press <Options> and select Edit
to access the following properties:
Centre address: store or change the
number of your message server.
Validity period: set the length of time
your messages are stored in the SMS
server.
65
Menu functions
•
66
Add my namecard: allow your contact
information to be attached to MMS
messages. You must have created a
name card.p. 42
Receiving options: set up the options
for receiving MMS messages:
Home network: determine if your
phone retrieves new messages
automatically when you are in your
home service area.
Foreign network: determine if your
phone retrieves new messages
automatically when you are roaming in
another network.
Reception within your home network or
while roaming has the following options:
- Auto download: the phone
automatically retrieves messages from
the server.
- Manual: the phone receives
notifications first from the server. Use
the Retrieve option to manually
retrieve new messages.
- Restricted (Foreign network only): the
phone receives notifications first from
•
•
•
the server. When you attempt to
download new messages, the phone
informs you of additional charges.
- Reject: the phone rejects all
messages.
Send delivery report: set the network
to inform the sender when a message
has been delivered to you.
Send read report: determine whether
or not the phone sends a read-reply
when an incoming message has been
read.
Reject unknown: reject messages from
unknown senders.
Reject advertisement: reject
advertisements.
MMS profiles: select a connection
profile to be used for MMS. You can also
create or edit a profile.p. 112
Message size: select the maximum file
size of MMS attachment. This file size
may vary, depending on the country.
Auto resize image: select the
maximum image size of an MMS
attachment. If you select a larger image
•
Email (Menu 5.0.3)
You can configure e-mail settings.
You cannot change e-mail profile and
account settings while an e-mail is being
sent or retrieved.
•
Menu functions
Sending options: set up the options for
sending e-mails:
From: enter a sender name.
Send account: select the default
account.
Priority: change the priority level of
your e-mails.
Keep a copy: leave copies of your
e-mails in the Sentbox folder after
sending.
Include body when replying: set
whether the phone includes the original
e-mail text in a reply.
Request read report: request a report
from each recipient as to when your
e-mail was read by the recipient.
Request delivery report: set the
network to inform you when your e-mail
has been delivered.
Messaging (Menu 5)
•
than the maximum, the phone
automatically resizes it.
Creation mode: select MMS creation
mode:
Restricted: you are not able to create
and send messages using unsupported
file formats.
Warning: the phone informs you when
you create and send a message using
unsupported file formats.
Free: you can create and send messages
adding unsupported file formats.
Default style: customise the default
settings for displaying a received MMS
message on your phone:
Font colour: select a font colour.
Font style: select a font style.
Background colour: select a
background colour.
Page duration: select a length of time
the display shows one page in a
message.
67
Menu functions
•
68
Add my namecard: allow your contact
information to be attached to e-mails.
You must have created a name card.
p. 42
Add signature: allow your signature to
be inserted to e-mails.
Input signature: make your signature.
Receiving options: set up the options
for receiving e-mails:
Set download limit: determine the
maximum size for incoming e-mails. Your
phone will reject e-mails that exceed the
specified size.
Auto polling: set the phone to
automatically check the e-mail server to
download e-mails at the specified
intervals.
Polling frequency: set how often the
phone checks the e-mail server for
automatic polling.
Send read report: determine whether
or not the phone sends a read-report to
a sender.
Block address: specify e-mail
addresses to reject e-mails from those
•
•
addresses, and activate or deactivate
mail blocking.
Block subject: reject e-mails which
contain subjects you specify, and
activate or deactivate mail blocking.
Email profiles: select a network
connection profile to be used for sending
and receiving e-mails. You can also
create or edit a profile.p. 112
Email accounts: select an account to be
used and set up e-mail accounts. Press
<Options> and select Edit to access the
following options:
Account name: enter a name for the
currently selected account.
SMTP server: enter the IP address or
domain name of the outgoing e-mail
server.
SMTP port: enter the SMTP port
number.
Use SSL: use the SSL (Secure Sockets
Layer) protocol for accessing the SMTP
server.
Email retrieval server type: select the
protocol for the incoming e-mail server.
Voicemail (Menu 5.0.4)
Use this menu to set the number of your
voicemail server.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
Push message (Menu 5.0.5)
You can change the settings for receiving
push messages from the wireless web
server.
69
Messaging (Menu 5)
POP3 server before connecting to the
SMTP server to send e-mails.
Use SMTP authentication: enable
SMTP authentication, which requires the
user to log in before sending e-mails.
Same as POP3/IMAP4: select if you
want the SMTP server to have the same
parameters as the POP3 or IMAP4 server.
User name: enter the user name for
SMTP server connection.
Password: enter the password for SMTP
server connection.
Menu functions
The remaining options depend on the
protocol type setting.
POP3 server/IMAP4 server: enter the
IP address or domain name of the POP3
or IMAP4 server.
POP3 port/IMAP4 port: enter the POP
or IMAP4 port number.
Use SSL: use the SSL (Secure Sockets
Layer) protocol for accessing the POP3 or
IMAP4 server.
IMAP4 retrieval option (IMAP4
protocol only): set whether the phone
retrieves only new messages or all
messages.
Keep on server: leave copies of e-mails
in the server after retrieving.
My address: enter your e-mail address.
User name: enter the user name for
POP3 or IMAP4 server connection.
Password: enter the password for POP3
or IMAP4 server connection.
Use POP before SMTP authentication
(POP3 protocol only): connect to the
Menu functions
•
•
Receiving option: enable or disable the
reception of push messages.
Service loading: set whether your
phone automatically launches the web
browser to access a push message as it
comes in.
Broadcast (Menu 5.0.6)
Use this menu to change the settings for the
broadcast message service.
• Activation: enable or disable the
reception of broadcast messages.
• Receiving channels: indicate the
channels from which you wish to receive
broadcast messages.
Please contact your service provider for
further details.
• My channels: add a new channel if you
selected the My channels option. Press
<Create>. Set the channel ID
information and title.
• Language: select the languages in
which broadcast messages display.
70
Memory status (Menu 5.*)
Use this menu to view the number of
messages or the amount of memory
currently in use for each message type in
each folder. You can also delete a message
by selecting it from this menu and pressing
<Delete>.
My files
(Menu 6)
The My files menu allows you to access
images, videos, music files, and sounds
stored in the phone’s memory or on a
memory card.
To access this menu, press [OK] in Idle
mode and select My files.
Tips for Digital Rights Management
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by
MMS may require a licence key to access
them. You can acquire the key from the
website which owns the rights to the
content; use the Activate key option.
Your phone supports only count-based or
unlimited-access DRM files.
You can access data stored on a memory
card, if a memory card is inserted.
From the My files screen, scroll to the Card
tab by pressing [Left] or [Right].
Select the folder you want and open files.
Images
Use this menu to access photos you have
taken and images you have downloaded,
received in messages, or imported from your
computer.
1. Scroll to an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show, a
sequential presentation of each image in the
current folder.
1. While viewing an image, press
<Options> and select Slide show.
The slide show begins.
2. Press <Back> to stop the slide show.
My files (Menu 6)
Switching between the phone’s
memory and a memory card
Viewing an image
Menu functions
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid
key.
•
: Unforwardable item with a valid
key.
•
: Unforwardable item without a valid
key.
Editing an image
1. While viewing an image, press
<Options> and select Edit.
2. Press <Options> and edit the photo
using the following options:
• Save as: save the file as a different
name.
• Effects: change the colour tone or
apply a special effect.
• Partial effects: access the following
advanced editing options:
71
Menu functions
•
•
•
•
•
•
•
•
72
Partial blur: adjust the clarity of the
image selected by a square box.
Redeye repair: remove the
occurrence of red-eye on the image.
Adjust: adjust the image brightness,
contrast, or colour balance.
Transform: change the image size
or image orientation.
Crop: select a variously sized and
shaped section of the image and crop
the image.
Insert: apply a decorative frame, or
add an image clip, emoticon, or text.
Set as: set the image as your
wallpaper for the display or a caller
ID image for a Contacts entry.
Send via: send the file via MMS,
e-mail, or Bluetooth.
Print via: print the image by
connecting the phone to a printer via
USB or Bluetooth. Some printers may
not be compatible with the phone.
Undo: remove the applied effect.
3. When you have finished, press <Done>
or press <Options> and select Done.
4. Press [OK].
5. Select a memory location, if a memory
card is inserted.
6. Enter a photo name, and then press
<Options> and select OK.
Using image options
While viewing a file, press <Options> to
access the following options:
• Zoom: zoom in or out.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
• Set as: set the image as your wallpaper
for the display or a caller ID image for a
Contacts entry.
• Delete: delete the file.
• Rename: change the file name.
• Edit: edit the image and save it as a
different file.
•
•
•
•
•
Downloading images
1. Select the My photos folder.
2. Select More pictures. You are
connected to the website preset by your
service provider.
Videos
Use this menu to access video clips you have
recorded, downloaded, received in
messages, or imported from your computer.
Video clips recorded on other devices, such
as camcorders, may not play correctly.
Playing a video clip
1. Scroll to a video folder.
2. Select a video clip. The media player
opens.p. 47
My files (Menu 6)
•
3. Search for the file you want and follow
the onscreen instructions to download it.
Menu functions
•
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Bluetooth visibility: share the selected
file with other Bluetooth devices.
Slide show: view all images as a slide
show.
Print via: print the image by connecting
the phone to a printer via USB or
Bluetooth. Some printers may not be
compatible with the phone.
Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed or unlock the file.
Details: access the file properties.
Using video options
From the video list, press <Options> to
access the following options:
• Play: play the video clip.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
• Move: move the selected file or the files
you want to another folder.
73
Menu functions
•
•
•
•
•
•
•
•
•
•
•
Copy: copy the selected file or the files
you want to another folder.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Delete: delete the selected file or the
files you want.
Rename: change the file name.
Record video: switch to Record mode to
record a video.
Create folder: create a new folder.
List by: change the sort order of the list.
Bluetooth visibility: share the selected
file or the files you want with other
Bluetooth devices.
Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed or unlock the file.
Details: access the file properties.
Downloading video clips
1. Select the My video clips folder.
74
2. Select More videos. You are connected
to the website preset by your service
provider.
3. Search for the file you want and follow
the onscreen instructions to download it.
Sounds
Use this menu to access voice memos you
have recorded, and sound clips you have
downloaded, received in messages, or
imported from your computer.
Playing a sound clip
1. Scroll to a sound folder.
2. Select a sound clip. The media player
opens.p. 44
For a voice memo, see Voice recorder.
p. 92
Using sound options
From the sound list, press <Options> to
access the following options:
• Play: play the selected file.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
•
•
•
•
•
•
•
•
•
•
•
Bluetooth visibility: share the selected
file or the files you want with other
Bluetooth devices.
Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed or unlock the file.
Details: access the file properties.
Downloading sound clips
1. Select the Music or Ringtones folder.
2. Select More sounds. You are connected
to the preset website by your service
provider.
3. Search for the file you want and follow
the onscreen instructions to download it.
My files (Menu 6)
•
•
Menu functions
•
Set as: set the sound as your ringtone
for a voice call or video call, or as a
ringtone for a Contacts entry.
Move: move the selected file or the files
you want to another folder.
Copy: copy the selected file or the files
you want to another folder.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Delete: delete the selected file or the
files you want.
Rename: change the file name.
Add to playlist (for music files): add
the selected file to the play list.
Record audio (for ring tone or voice
memos): record a new voice memo.
Create folder: add a new folder.
List by: change the sort order of the list.
Games and more
Use this menu to access the embedded Java
games and download Java applications.
Accessing a game
Select a game from the game list and follow
the onscreen instructions. The procedure
may differ from game to game.
75
Menu functions
76
Using Java game options
Downloading new games
From the application list, press <Options>
to access the following options:
• Start: launch the selected game.
• Activate key: get a new licence key
when the key for the selected DRM file
expires.
• Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
• Delete: delete the selected game or the
games you want.
• Rename: change the game name.
• Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed or unlock the file.
• Advanced: access the following options:
Certificates: access the root certificates
for the operator and trusted third
parties.
Connections: select a connection profile
to be used for accessing an application
server. You can also create or edit a
profile.p. 112
• Details: access the game properties.
1. Select More games. You are connected
to the website preset by your service
provider.
2. Search for the application you want and
follow the onscreen instructions to
download it.
Other files
Use this menu to access any other files than
image, video, music and sound files. Your
phone provides you with Picsel File Viewer to
allow you to view, without corruption,
various document files. Available file formats
are *.swf, *.svg, *.doc, *. xls, *.ppt, *.pdf,
and *.txt.
Viewing a document
Select a file. Picsel File Viewer runs and
opens the document.
• Depending on the file size or memory
capacity of Picsel File Viewer, some files
may not open properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the
content of the document will not display
correctly.
Use the following keys to view the
document:
Key
Function
Key
Function
Changes the display to Full
screen view or Normal screen
view.
Pans the page
Using document options
Zooms in or out.
While viewing a document, press
<Options> or <
> to access the
following options:
• Full screen view/Normal view:
change the view mode.
• Zoom: zoom in or out.
• Pause/Resume: pause or resume
playback.
• Quality: select the image quality.
• Fit to screen: fit the file to the page
size, screen width, or screen height.
• Go to: move to another page of the
document.
• Rotate: Rotates the file 90 degrees
clockwise or counterclockwise.
• Screen panning/Normal panning:
change the page scroll mode. You can
/
OK
Fits the file to the page size.
1
Searches backward through
the file for the text entered in
the Search option.
2
Returns to the first page.
3
Searches forward through the
file for the text entered in the
Search option.
4
Returns to the previous page.
5
Rotates the file 90 degrees
clockwise or counterclockwise.
6
Moves to the next page.
8
Moves to the last page.
My files (Menu 6)
Scrolls through pages.
Left/Right
Menu functions
Up/Down/
77
Menu functions
•
•
•
•
•
•
•
•
78
scroll by screen size or scrolling by
preset pixel.
Hide controller/Show controller: hide
or display the shortcut tool bar in Full
screen view.
Search: search for text in the document.
Send via: send the file via e-mail or
Bluetooth.
Delete: delete the selected file.
Bluetooth visibility: share the selected
file or the files you want with other
Bluetooth devices.
Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed or unlock the file.
Details: access the file properties.
FileViewer shortcuts: view the
functions of the keys you can use in
Picsel File Viewer.
Viewing a calendar item, name card,
or bookmark item
After saving items in this folder, you can use
them.
On the Other files screen, select one of the
calendar items, name cards, and bookmark
items.
Using file options
You can access the following options by
pressing <Options> on the Other files
screen:
• View: open the selected file.
• Register to Contacts: register the
selected name card to a Contacts entry.
• Register to Calendar: register the
selected calendar item to the Calendar.
• Register to Bookmark: register the
selected bookmark item to the bookmark
list.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
•
•
•
•
•
Memory status
This menu displays the amount of memory
currently in use in each media folder. You
can also delete a media file by selecting it
from this menu and pressing <Delete>.
(Menu 7)
The Calendar feature enables you to keep
track of your schedule.
To access this menu, press [OK] in Idle
mode and select Calendar.
Selecting a day on the calendar
When you enter the Calendar menu, the
calendar appears with today’s date indicated
by an orange box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Calendar (Menu 7)
•
Calendar
Menu functions
•
•
•
Move: move the selected file or the files
you want to another folder.
Copy: copy the selected file or the files
you want to another folder.
Delete: delete the selected file or the
files you want.
Rename: change the file name.
Create folder: add a new folder.
List by: change the sort order of the file
list.
Bluetooth visibility: share the selected
file or the files you want with other
Bluetooth devices.
Lock/Unlock: lock the file to protect it
from being moved, deleted, and
renamed or unlock the file.
Details: access the file properties.
Creating a new item
You can store scheduled items,
anniversaries, holiday items, private items,
and important items.
Entering a scheduled item
1. Select a date on the calendar.
2. Press <Options> and select Create →
Appointment, Important, or Private.
79
Menu functions
3. Enter information or change the settings:
• Title: enter the title of the item.
• Details: enter item details.
• Start date and Start time: enter
the starting date and time for the
item.
• End date and End time: enter the
ending date and time for the item.
• Location: enter information about
the item location.
• Alarm: select to set an alarm for the
item.
• Before: set how long before the item
the alarm is to alert.
• Alarm tone: select an alarm tone.
• Repeat: select to set the item to
recur and select a time format for an
item to recur.
• every: set a repeat interval.
• By date: select a specific date of the
month for an item to recur.
• By day: select a specific day of the
month for an item to recur.
80
•
Except weekends: select to set the
alarm to sound except for weekends.
• Expiry: change the expiry setting.
4. Press <Options> and select Save to
save the item.
Entering an anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the item
the alarm is to alert.
• Alarm time: enter the alarm time.
• Alarm tone: select an alarm tone.
• Repeat every year: select to set the
phone to remind you of the anniversary
every year.
4. Press <Options> and select Save to
save the anniversary.
Entering a holiday
Consulting the calendar
Once you have scheduled items, the square
brackets appear on the corner of the date
box.
From the item list, press <Options> to
access the following options:
• View: access the selected item.
• Create: add a new item.
• Send: send the item via MMS, e-mail, or
Bluetooth.
• View mode: change the calendar view
mode.p. 82
• Event list: display all items of the
selected item type.
• Delete: delete the selected item or all of
the items for the selected day.
• Save to My files: save the selected item
as a data file in the Other files folder.
• Print via Bluetooth: print the item
details via a Bluetooth-compatible
printer. Some printers may not be
compatible with the phone.
Calendar (Menu 7)
1. Select a date on the calendar.
2. Press <Options> and select Create →
Holiday.
3. Enter information or change the settings:
• Occasion: enter information about
the holiday.
• Date: enter the date.
• Repeat every year: select to set the
phone to remind you of the holiday
every year.
4. Press <Options> and select Save to
save the holiday.
1. Select a date on the calendar to display
the items for that day. The list of items
displays.
2. Select an item to view its details.
Menu functions
You can retrieve person’s birthday
information from Contacts by pressing
<Options> and selecting Birthday from
Contacts.
Viewing an item
81
Menu functions
•
•
•
Settings: change the default calendar
settings:
Starting day: select which day of the
week the calendar starts with.
Default view mode: select the default
calendar view mode.
Missed alarm event: access the missed
event alarms.
Memory status: access memory
information for the items stored on the
calendar. You can also delete an item by
selecting it from this menu and pressing
<Delete>.
Using calendar options
On the calendar, press <Options> to access
the following options:
• View: display the items stored for the
selected date.
• View mode: change the calendar view
mode.p. 82
• Create: add a new item.
• Go to: go to today’s date or enter a
specific date.
82
•
•
•
•
•
Event list: display all items of the
selected item type.
Delete: delete the selected item or the
items for the specific period.
Settings: change the default calendar
settings:
Starting day: select which day of the
week the calendar starts with.
Default view mode: select the default
calendar view mode.
Missed alarm event: access the missed
event alarms.
Memory status: access memory
information for the items stored on the
calendar. You can also delete an item by
selecting it from this menu and pressing
<Delete>.
Viewing a different mode
By default, the calendar appears in Monthly
view mode. You can change the calendar
display to Weekly view mode or Daily view
mode.
Press <Options> and select View mode →
a view mode.
Daily view
Camera
You can view items for the selected date.
You can use the camera module embedded
in your phone to take photos and record
videos.
Select an item to view its details.
Weekly view
You can view items for the selected week. A
cell on the timetable indicates the presence
of a schedule item. Press [ / ] to access
another week.
Select a cell for the date you want.
• Do not take photos or record videos of
people without their permission.
• Do not take photos or record videos in a
place where cameras are not allowed.
• Do not take photos or record videos in a
place where you may interfere with
another person’s privacy.
Camera (Menu 8)
If you have set the Repeat and Alarm
options, the
and
icon display.
To access this menu, press [OK] in Idle
mode and select Camera, or press and hold
[
].
Menu functions
The following icons may display to indicate
the type:
•
Anniversaries
•
Appointments
•
Important items
•
Private items
•
Holidays
(Menu 8)
Taking a photo
You can take photos in various modes. The
camera produces JPEG photos.
When you take a photo in direct sunlight or
in bright conditions, shadows may appear on
the photo.
83
Menu functions
Taking a photo
1. Access the Camera menu to turn on the
camera. You can also press and hold
[
] in Idle mode.
2. Make any desired adjustments.
• Press <
> to use camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 85
3. Press [OK] or [
] to take a photo.
The photo is saved in the My photos
folder.
4. To
Press
use photo options <
> or
<Options>.p. 86
delete the photo
[C] and then
<Yes>.
send the photo via [OK].p. 54
MMS
return to Capture
mode
84
<
> or <Back>.
Using camera options in Capture
mode
In Capture mode, press <
> to access the
following options:
• Switch camera: switch between the
front camera lens and rear camera lens.
• Shooting mode: take a photo in the
following modes:
Single shot: take a photo in Normal
mode. You can select whether the
camera automatically saves a photo.
Multi-shot: take a series of action stills.
You can select the number of photos the
camera will take.
Mosaic style: take several stills and
save them in one frame. Press the
shutter release key to take each photo.
• Size: select an image size.
• Timer: set a time delay before the
camera takes a photo.
• Effects: change the colour tone or apply
a special effect.
• Frames: apply a decorative frame.
•
•
•
•
Camera (Menu 8)
In Capture mode, press < > to access the
following options:
• Camera: switch to Capture mode.
• Camcorder: switch to Record mode.
• Folders: access the My photos folder.
• Settings: change the default settings for
taking a photo. Select Camera and press
[Left] or [Right] to scroll through the
following setting options:
Quality: select an image quality.
Scene program: set whether to use
Night shot mode.
Focus mode: select a focus mode.
Spot metering: adjust the exposure
based on a specific area of the image.
Select On to display the spot focus frame
in the middle of the image, and change
the exposure according to the brightness
of the image fragment in the frame.
Shutter sound: select the sound that
you hear when you press the shutter
release key.
Multi-shot speed: select the shooting
speed in Multi Shot mode.
Single shot mode: select whether or
not the camera automatically saves the
photo.
Default storage: select the memory
location to store photos, if a memory
card is inserted.
Default name: change the default
prefix for file names.
Exit: turn off the camera.
Menu functions
White balance: adjust the colour
balance of the image. You can make your
photo appear warmer or cooler.
Viewfinder: select a preview screen.
Shortcuts: view the functions of the
keys you can use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Key
Function
Left/
Right
Adjusts the brightness.
85
Menu functions
Key
Function
Up/
Down
or /
Zooms in or out. (Not available
for the maximum size)
1
Switches to Record mode.
p. 87
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or
applies a special effects.
6
Changes the white balance
setting.
7
Adds a decorative frame.
8
Sets the timer.
0
Goes to the My photos folder.
p. 71
Changes a preview screen.
86
Using photo options
After saving a photo, press <
> or
<Options> to access the following options:
• View: access one of the multi-shot
photos.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
• Delete: delete the selected file, the files
you want, or all files.
• Viewfinder: return to Capture mode.
• Set as: set the photo as your wallpaper
for the display, or as a caller ID image for
a Contacts entry.
• Edit: edit the photo by using various
tools.p. 71
• Rename: change the file name.
• Go to My photos: access the My
photos folder.
• Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed, or unlock the file.
• Bluetooth visibility: share the file with
other Bluetooth devices.
• Details: access the file properties.
Recording a video
6. To
You can record a video of what is displayed
on the camera screen and save it.
Recording a video
Press
use video options
<Options>.p. 89
delete the video
clip
[C] and then
<Yes>.
return to Record
mode
<Back>.
Using camera options in Record mode
In Record mode, press <
> to access the
following options:
• Switch camera: switch between the
front camera lens and rear camera lens.
• Size: select a frame size.
• Timer: set a time delay before the
camera starts recording.
• Effects: change the colour tone or apply
a special effect.
• White balance: adjust the colour
balance of the image. You can make your
photo appear warmer or cooler.
• Record audio: record audio with a video
clip.
Camera (Menu 8)
6. To
[OK].
Menu functions
1. Access the Camera menu to turn on the
camera. You can also press and hold
[
] in Idle mode.
2. Press [1] to switch to Record mode.
3. Make any desired adjustments.
• Press <
> to use camera options.
next section
• Use the keypad to change the camera
settings or switch to other
modes.p. 88
4. Press [OK] or [
] to start recording.
5. Press [OK] or [
] to stop recording.
The video is saved in the My video clips
folder.
Press
play back the
video clip
87
Menu functions
•
•
Recording mode: select a video
recording mode. If you select Limit for
MMS, you can record a video suitable for
an MMS message.
Shortcuts: view the functions of the
keys you can use in Record mode.
In Record mode, press < > to access the
following options:
• Camera: switch to Capture mode.
• Camcorder: switch to Record mode.
• Folders: access the My video clips
folder.
• Settings: change the following settings
for recording a video. Select Camcorder
and press [Left] or [Right] to scroll
through the following setting options:
Quality: select a video quality.
Default storage: select the memory
location to store videos, if a memory
card is inserted.
Default name: change the default
prefix for file names.
• Exit: turn off the camera.
88
Using the keypad in Record mode
You can use the keypad to customise your
camera settings in Record mode.
Key
Function
Left/
Right
Adjusts the brightness.
Up/
Down
or /
Zooms in or out.
1
Switches to Capture mode.
p. 83
2
Changes the frame size.
3
Changes the video quality.
4
Changes the video recording
mode.
5
Changes the colour tone or
applies a special effect.
6
Changes the white balance
setting.
7
Mutes or unmutes audio.
Function
8
Sets the timer.
0
Goes to the My video clips
folder.p. 73
Using video options
•
•
Show controller/Hide controller: set
the video player to display or hide the
controller.
Details: access the file properties.
Settings: change the default settings for
playing video files:
Volume: select a volume level.
Show controller: set the video player
to display or hide the controller.
Google/Yahoo!
(Menu 9)
Google/Yahoo! (Menu 9)
After saving a video clip, press <Options>
to access the following options:
• Play: play back the video clip.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
• Delete: delete the file.
• Viewfinder: return to Record mode.
• Rename: change the file name.
• Go to My video clips: access the My
video clips folder.
• Lock/Unlock: lock the file to prevent it
from being moved, deleted, and
renamed, or unlock the file.
• Bluetooth visibility: share the file with
other Bluetooth devices.
•
Menu functions
Key
Use the Google or Yahoo! menu to use the
Google or Yahoo search engine and e-mail
service, depending on your service provider
or country.
To access this menu, press [OK] in Idle
mode and select Google/Yahoo!.
Google search or Y! search
Use this menu to launch the Google or Yahoo
search engine that allows you to find
information, news, images, videos, or local
services from around the web.
89
Menu functions
GMail or Y! mail
Use this menu to use the Google or Yahoo
e-mail service.
Applications
(Menu *)
•
•
•
•
You can use convenient features, such as a
voice recorder, world clock, calculator,
converter, timer, and stopwatch.
•
To access this menu, press [OK] in Idle
mode and select Applications.
•
Memo (Menu *.1)
You can create a list of memos.
Creating a memo
1. Press <Options> and select Create.
2. Enter the memo contents and press
[OK].
Viewing a memo
Select a memo from the list.
Using memo options
From the memo list, press <Options> to
access the following options:
90
•
View: access the selected memo.
Create: add a new memo.
Send: send the memo as a data file via
MMS, e-mail, or Bluetooth.
Delete: delete the selected memo or all
memos.
Save to My files: save the selected
memo as a data file in the Other files
folder.
Print via Bluetooth: print the memo
details via a Bluetooth-compatible
printer. Some printers may not be
compatible with the phone.
Memory status: access memory
information for memos. You can also
delete an item by selecting it from this
menu and pressing <Delete>.
Tasks (Menu *.2)
You can create a list of tasks you need to
complete.
Entering a task
1. Press <Options> and select Create.
2. Enter information or change the settings:
•
•
•
•
•
•
•
•
•
•
•
Viewing a task
A check mark appears in the status check
box if the task has been completed. If you
have set the Alarm option, the
icon
displays.
Select a task from the list.
Using task options
From the task list, press <Options> to
access the following options:
• View: access the selected task.
•
•
Applications (Menu *)
•
Create: add a new task.
Send: send the task as a data file via
MMS, e-mail, or Bluetooth.
Done/Not done: change the status of
the task.
Sort by: change the sort order of the
list.
Delete: delete the selected task, all
tasks, or finished tasks.
Save to My files: save the selected task
as a data file in the Other files folder.
Print via Bluetooth: print the task
details via a Bluetooth-compatible
printer. Some printers may not be
compatible with the phone.
Missed alarm event: access the missed
event alarms.
Memory status: access memory
information for tasks. You can also delete
an item by selecting it from this menu
and pressing <Delete>.
Menu functions
Title: enter the title for the task.
Task: enter task details.
Start date: enter the starting date.
Due date: enter the ending date.
Alarm: select to set an alarm for the
task.
• before: set how long before the task
the alarm is to alert.
• Alarm time: enter the alarm time.
• Alarm tone: select an alarm tone.
• Priority: select a priority level.
3. Press <Options> and select Save to
save the task.
Voice recorder (Menu *.3)
Use this menu to record voice memos. A
voice memo can be up to one hour long.
91
Menu functions
Recording a voice memo
1. Press [OK] to start recording.
2. Speak into the microphone.
Press [OK] to pause or resume the
recording.
3. Press [Down]. The voice memo is saved
automatically.
4. Press [OK] to review the memo, or press
[Up] to record additional memos.
Playing a voice memo
1. From the voice recorder screen, press
<Options> and select My voice clips.
2. Select a voice memo.
During playback, use the following keys:
Key
Function
OK
Pauses or resumes playback.
Left
Moves backward in a file.
Right
Moves forward in a file.
/
Down
92
Adjusts the volume.
Stops playback.
Key
Function
Up
Switches to Record mode (
or Review mode ( ).
)
Using voice recorder options
After playback, press <Options> to access
the following options:
• Play: play the selected voice memo in
Review mode.
• Record: record a new voice memo.
• My voice clips: access the My voice
clips folder.
• Send via: send the file via MMS, e-mail,
or Bluetooth.
• Activate key: get a new licence key
when the key for the selected DRM file
expires.
• Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
• Set as: set the sound as your ringtone
for a voice call or video call, or as a
ringtone for a Contacts entry.
• Delete: delete the file.
•
•
•
Use this menu to set the home and local
time zone.
Selecting the home time zone
1. Press <Options> and select Edit on the
upper line ( ).
2. Select Home zone.
3. Press [Left] or [Right] to scroll to the city
you want.
Adding a time zone
1. From the World clock screen, press
<Options> and select Add.
2. Press [Left] or [Right] to scroll to the city
you want. As the time line moves, the
time and date of the given zone display.
3. Press <OK>.
Applications (Menu *)
World clock (Menu *.4)
You can view the time difference
between your home time zone and Green
witch Mean Time (GMT). If you want to
apply Daylight Saving Time (DST) to
your time zone, select Daylight saving.
4. Press <OK> to save the home time
zone.
5. Press <Yes> to update the time and
date information.
Menu functions
•
•
Rename: change the file name.
Bluetooth visibility: share the selected
file with other Bluetooth devices.
Lock/Unlock: lock the file to prevent it
from being moved, deleted and
renamed, or unlock the file.
Details: access the file properties.
Record settings: customise the default
settings for the voice recorder:
Default name: change the default
prefix of file names.
Recording time: select a maximum
recording time.
Using world clock options
From the World clock screen, press
<Options> to access the following options:
• Edit: change the local time zone.
• Add: add a time zone.
• Remove: delete the selected time zone.
93
Menu functions
•
•
Set: set the selected time zone to be
displayed for a dual clock type.
Display settings: set the selected time
zone to be displayed for a dual clock
type.
Calculator (Menu *.5)
Use this menu to perform basic arithmetic
functions such as addition, subtraction,
multiplication, and division.
Performing a calculation
1. Enter the first number.
• Press [ ] or [ ] to include a decimal
point or brackets.
• Press [ ] or [ ] to move the cursor.
2. Enter the operation for your calculation
by pressing the Navigation keys.
3. Enter the second number.
4. Press [OK] to view the result.
5. If necessary, repeat from step 2 to
continue the calculation.
You can access the Converter feature by
pressing <Converter>.
94
Converter (Menu *.6)
Use this menu for common conversions,
such as currency and temperature.
Performing a calculation
1. Select the converter type you want.
2. Press [Left] or [Right] to select the
original unit and press [Down].
3. Enter the value to be converted and
press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature
to above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit
you want to convert to.
The equivalent value for the amount you
entered displays.
Using converter options
Press <Options> to access the following
options:
• View Rate: display the currency rate
list. You can edit the rate or add more
currency rates.
• Clear: clear the current values.
•
Reverse: reverse the conversion.
Timer (Menu *.7)
Starting the timer
Stopping the timer
•
•
Press any key to stop the timer when it
rings.
Press [OK] on the Timer screen to stop
the timer before it rings.
Stopwatch (Menu *.8)
Use this menu to measure elapsed time. The
maximum time is 24 hours.
1. Press [OK] to start the stopwatch.
This menu is available if you use a USIM/SIM
card that supports SIM Application Toolkit
menus and provides additional services,
such as news, weather, sports,
entertainment, and location services.
Available services may vary, depending on
your service provider’s plans.
Alarms (Menu 0)
1. Press <Set>.
2. Enter the length of time you want to
count down and press <OK>.
3. Press [OK] to start counting down.
SAT (Menu *.9)
Menu functions
Use this menu to set a period of time for the
phone to count down. The phone sounds an
alarm when the specified period of time has
expired.
2. Press [OK] to select an interval. You can
repeat this step for a total of 50
intervals.
3. To reset the stopwatch, press <Reset>.
For details, see your USIM/SIM card
instructions or contact your service provider.
Alarms
(Menu 0)
Use this menu to set alarms to sound at
specific times. The alert type for a normal
alarm corresponds to the call alert type
settings in the currently selected profile. A
wake-up alarm is not affected by your profile
setting.
95
Menu functions
To access this menu, press [OK] in Idle
mode and select Alarms.
Setting an alarm
1. Select the type of alarm.
2. Specify the following alarm settings:
• Name: (for a normal alarm) enter a
name for the alarm.
• Alarm activation: activate the
alarm.
• Alarm time: enter the alarm time.
• Alarm type: select an alert type for
the alarm.
• Alarm tone: select an alarm tone.
• Alarm volume: select the volume
for the alarm melody.
• Recurrence: select the days for the
alarm.
• Snooze: set the snooze interval you
want.
• Repeat: set a repeat option.
3. Press [OK] to save the alarm.
96
Stopping an alarm
When the time for an alarm comes and the
alarm sounds:
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <OK> or
[OK].
• Press <Snooze> to cause it to sound
again after the specified minutes.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm activation line.
3. Press [OK].
Setting alarms to sound when the
phone is off
From the Alarms screen, select Auto power
→ On.
If the phone is off when it is time for the
alarm to sound, the phone switches on and
sounds the alarm.
Settings
(Menu #)
To access this menu, press [OK] in Idle
mode and select Settings.
Phone profiles (Menu #.1)
Editing a profile
1. Scroll to the profile you want.
2. Press <Options> and select Edit.
3. Change the sound settings. Press [Left]
or [Right] to access the options in other
tabs:
• Call alert type: select an alert type
for the call ringer.
•
•
•
•
•
•
•
Settings (Menu #)
Your phone provides you with sound profiles
that allow you to quickly and easily change
the sound settings of the phone for different
events or situations. Use this menu to adjust
the properties of each profile and activate
the profile you need.
•
Voice call ringtone: select a
ringtone for the call ringer of voice
calls.
Video call ringtone: select a
ringtone for the call ringer of video
calls.
Ringtone volume: adjust the
volume for the call ringer.
Auto reply: set the phone to send a
reply message automatically.
Message alert type: select an alert
type for the message ringer.
Message alert tone: select a
ringtone for the message ringer.
Message alert repetition: select if
the phone repeats reminding you of a
new message.
Alert tone volume: adjust the
volume for the message ringer.
Keypad tones: select a tone which
sounds when you press a key.
Menu functions
The Settings menu provides you with
various setting options to customise the
phone to your preferences and needs. You
can also reset the settings to their default
status.
•
Sound effects by your Flash Dial
Font setting will override this key
tone setting.
97
Menu functions
Power on type: select an alert type
for the power-on ringer.
• Power off type: select an alert type
for the power-off ringer.
• Slide tone: cause the phone to
sound when you open or close the
phone.
• Volume, phone sounds: adjust the
phone volume for keytones and
sound effect tones.
4. When you have finished, press
<Options> and select Save.
current time for the country that you are
in when you travel abroad.
•
Changing an active profile
From the profile list, select the profile you
want.
Time & date (Menu #.2)
Use this menu to change the time and date
displayed on your phone.
• Time zone updating: select one of the
following options:
Prompt first: your phone will read the
MCC (Mobile Country Code) from the
network and automatically update the
98
Time information may not be updated
when you move to one time zone to
another within a country.
•
•
•
•
•
Automatic: your phone will receive time
information from the network.
Manual only: you can set the time and
date manually.
Home zone: select your home time
zone.p. 93
Time: enter the current time. To select
AM or PM for 12-hour time format, press
[Right].
Date: enter the current date.
Time format: select a time format.
Date format: select a date format.
Display & light settings (Menu #.3)
Use this menu to change settings for the
display and the light.
Display settings (Menu #.3.1)
Use this menu to change settings for the
display.
•
•
•
Dual clock: use this menu to set the
dual clock, one for your home time zone
and the other for a time zone of your
choice, to be displayed in Idle mode.
Light settings (Menu #.3.2)
Use this menu to change settings for the
light.
• LCD brightness: use this menu to
adjust the brightness of the display.
• Backlight time: you can select the
length of time the backlight or display
stays on when the phone is not used.
On: select the length of time the
backlight stays on.
Dim: select the length of time the
display stays on in Dim mode after the
backlight turns off. After a specified time,
the display turns off.
• Keypad light: you can set how the
phone controls the use of the keypad
light.
Use at any time: the keypad light is
always used.
Use at custom time: the keypad light is
used at a specified time period.
Settings (Menu #)
•
•
Menu functions
•
Wallpaper: you can change the
background image that is displayed on
the display.
Pictures: the phone displays the image
you have set as wallpaper for the idle
screen.
Living world: the phone displays the
animated image that is changed
depending on your network.
My screen: the phone displays a photo
slide of your favourite image for the idle
screen.
Greeting message: use this menu to
enter the greeting that is displayed
briefly when the phone is switched on.
Main menu style: use this menu to
select a display style for the main menu
screen.
Pop up list menu: use this menu to
display the pop-up list that shows the
menu options.
Dialling display: use this menu to
customise the settings for the numbers
entered and the background colour of
the display while dialling.
99
Menu functions
Phone settings (Menu #.4)
Many different features of your phone’s
system can be customised to suit your
preferences.
Language (Menu #.4.1)
Use this menu to select a language for the
display text. If you select Automatic, the
phone uses the same language as the USIM/
SIM card.
Shortcuts (Menu #.4.2)
You can use the Navigation keys as shortcut
keys to access specific menus directly from
Idle mode. Use this menu to assign these
shortcut assignments to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut
key.
2. Select the menu that will be assigned to
the key.
Using shortcut options
On the Shortcuts screen, press <Options>
to access the following options:
100
•
•
•
•
Assign: assign a shortcut menu.
Change: change a shortcut menu
assignment.
Remove: deactivate the shortcut
assignment to the selected key.
Remove all: deactivate all shortcut
assignments.
Own number (Menu #.4.3)
Use this menu to check your phone
numbers, or to assign a name to each of the
numbers. Changes made here do not affect
the actual subscriber numbers on your
USIM/SIM card.
Volume key function (Menu #.4.4)
Use this menu to set whether the phone
mutes the call ringer or rejects a call if you
press and hold [ / ] when a call comes in.
Camera key (Menu #.4.5)
Use this menu to set a default function for
[
]. If you select Always ask, the phone
will ask you to select the function each time
you press and hold [
] in Idle mode.
Slide settings (Menu #.4.6)
the default setting provided by the
network.
Some networks do not allow the user to
change this setting.
•
Call settings (Menu #.5)
Use this menu to set options for call
functions.
All calls (Menu #.5.1)
Use this menu to change the setting for call
functions and sounds.
• Show my number: prevent your phone
number from being displayed on the
phone of the person being called. If you
select By network, the phone will use
•
Settings (Menu #)
When you set Slide down to Continue
operation, the keypad lock works just
in Idle mode or after the display turns
off.
Closed user group: set incoming and
outgoing calls to be restricted to a
selected user group. For details about
how to create a closed user group,
please contact your service provider:
Use this user group: activate Closed
User Group (CUG) index numbers.
Outside access: enable calls to
numbers other than those in the Closed
user group. This feature depends on the
nature of your CUG subscription.
Default group: enable the default CUG,
if you have set one with your service
provider. When making a call, you are
given the option of using your default
CUG, instead of selecting one from the
list.
Group index: add, delete, or activate
CUG index numbers.
Auto reject: activate the Auto reject
feature. You can also set the phone to
Menu functions
Use this menu to set how the phone reacts
when you open it for an incoming call, and
when you close it while using a function.
• Slide up: set whether or not to answer a
call by opening the phone.
• Slide down: set whether or not the
phone maintains the menu you are using
when you close the phone.
101
Menu functions
•
•
•
•
102
reject a call from the unknown or
specified numbers.
Answering mode: set how to answer
incoming calls.
Show caller ID: set the phone to
display missed call notifications with the
most recently missed caller’s
information.
Call status tones: select the various
tones on the phone you want to turn on
or off:
Call connect tone: cause the phone to
beep when a call is connected to the
system.
Minute minder: cause the phone to
beep every minute during an outgoing
call to keep you informed of the length of
your call.
Call end tone: cause the phone to beep
when a call is disconnected by the other
person or the faded signal.
Alerts on call: set the phone to beep
when you receive a new message or
when the time for an alarm comes during
a call.
Voice call (Menu #.5.2)
Use this menu to access network services for
voice calls.
Setting a call diverting option
This network service reroutes incoming calls
to a different phone number that you
specify.
1. From the Voice call screen, select Call
diverting.
2. Select a call diverting option:
• Always: divert all calls.
• If busy: divert calls when you are on
another call.
• If no reply: divert calls when you do
not answer the phone.
• If out of reach: divert calls when
you are not in an area covered by
your service provider or when your
phone is switched off.
• Cancel all: cancel all call diverting
options.
3. Enter the number to which the calls will
be diverted in the Divert to line.
Setting a call barring option
You can change the call barring password
obtained from your service provider. On the
Call barring screen, press <Options> and
select Change password.
Setting a call waiting option
This network service informs you when
someone is trying to reach you while you are
on another call.
1. From the Voice call screen, select Call
waiting.
2. Press <Options> and select Activate.
To deactivate the call waiting, select
Deactivate.
Settings (Menu #)
This network service allows you to restrict
your calls.
1. From the Voice call screen, select Call
barring.
2. Select a call barring option:
• All outgoing calls: prohibit
outgoing calls.
• Outgoing international calls:
prohibit international calls.
• International calls except home:
only allow calls to numbers within the
current country when you are
abroad, and to your home country.
• All incoming calls: prohibit
incoming calls.
Incoming when roaming: prohibit
incoming calls when you use your
phone outside of your home country.
• Cancel all: cancel all call barring
settings, allowing calls to be sent and
received normally.
3. Enter the call barring password supplied
by your service provider.
4. Press <Options> and select Activate.
To deactivate the call barring, select
Deactivate.
•
Menu functions
4. If you select If no reply, move to the
Waiting time line and select the length
of time the network delays before
diverting a call.
5. Press <Options> and select Activate.
To deactivate the call diverting, select
Deactivate.
103
Menu functions
Setting an auto redial option
This service allows you to set the phone to
make up to ten attempts to redial a phone
number after an unsuccessful call.
1. From the Voice call screen, select Auto
redial.
2. Select On.
Video call (Menu #.5.3)
Use this menu to change the default settings
for using the video call feature.
• Select my image: select an image to be
displayed on the other’s phone if you will
not show your image via the camera.
• Select my video: select a video clip to
be displayed on the other’s phone if you
will not show your image via the camera.
• Use call fail options: set the phone to
retry when a voice call does not connect.
• Call diverting: reroute incoming video
calls to a different phone number that
you specify.p. 102
• Call barring: restrict video calls.
p. 103
104
•
Auto redial: set the phone to make up
to ten attempts to redial a phone number
after an unsuccessful call.
Data call (Menu #.5.4)
Use this menu to change the default settings
for using the data call feature.
• Call diverting: reroute incoming data
calls to a different phone number that
you specify.p. 102
• Call barring: restrict data calls.
p. 103
• Call waiting: set the network to inform
you when someone is trying to reach you
while on another call.p. 103
Security (Menu #.6)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and USIM/SIM
card.
If you enter an incorrect PIN/PIN2 three
times, the USIM/SIM card is blocked. To
unblock it, you need to enter your PUK/PUK2
(Personal Unblocking Key). The codes are
supplied by your network operator.
Phone lock (Menu #.6.1)
To change the password, use the Change
phone password menu.
SIM lock (Menu #.6.2)
Fixed dialling mode (Menu #.6.5)
If supported by your USIM/SIM card, Fixed
Dialling Number (FDN) mode restricts your
outgoing calls to a limited set of phone
numbers. When this feature is enabled, you
can make calls only to phone numbers
stored on the USIM/SIM card.
Change phone password (Menu #.6.6)
Use this menu to change your phone
password.
PIN lock (Menu #.6.3)
Change PIN code (Menu #.6.7)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card
against unauthorised use. When this feature
is enabled, the phone requires your PIN each
time it is switched on.
Use this menu to change your PIN. The PIN
lock feature must be enabled to change the
PIN.
Privacy lock (Menu #.6.4)
Use this menu to lock access to messages,
media files, call logs, Contacts entries,
calendar data, memos, or tasks.
Settings (Menu #)
This menu allows your phone to work only
with the current USIM/SIM by assigning a
SIM password. You must enter the SIM
password to use a different USIM/SIM card.
When a privacy option is enabled, you must
enter the phone password to access the
locked items.
Menu functions
Use this menu to protect the phone from
unauthorised use. When this feature is
enabled, you must enter a 4- to 8-digit
phone password each time the phone is
switched on.
Change PIN2 code (Menu #.6.8)
If supported by your USIM/SIM card, use
this menu to change your current PIN2.
Mobile tracker (Menu #.6.9)
When someone tries to use your phone with
another USIM/SIM card, the phone will
105
Menu functions
automatically send the preset tracking
message to your family or friends. You can
check the phone number from which the
messages are sent and then track your
phone. This feature is useful when the phone
is stolen or lost.
Sending of the tracking message will be
billed to the user of the unauthorised USIM/
SIM card. To use your phone with any other
USIM/SIM card, you must first deactivate
the Mobile tracker feature.
1. Enter the phone password and press
<Confirm>.
2. Specify the following options:
• Activation: activate or deactivate
the Mobile tracker feature.
• Recipients: specify phone numbers
to which you want to send the
tracking messages.
• Sender: enter the sender’s name.
• Message: check the preset tracking
message text.
3. When you have finished, press <Save>.
106
4. Press <Accept> if you agree to the
terms and conditions of service listed on
the screen.
Application settings (Menu #.7)
You can customise the settings for using
applications available on the phone.
Contact settings (Menu #.7.1)
Use this menu to set up the default contact
settings.
Speed dial (Menu #.7.1.1)
Use this menu to assign speed dial numbers
(2 to 9) to eight of your most frequently
called numbers.
Assigning speed dial entries
1. Scroll to a key location from 2 to 9. Key
1 is reserved for your voicemail server.
2. Press <Options> and select Assign →
Contacts or FDN contacts.
3. Select the contact you want from the
contact list.
Managing speed dial entries
View contacts from (Menu #.7.1.3)
From the Speed dial screen, press
<Options> to access the following options:
• Assign: assign a number to an
unassigned key.
• View: check the name and number
assigned to a key.
• Change: assign a different number to a
key.
• Remove: clear the speed dial setting for
a key.
• Voice call: make a voice call.
• Video call: make a video call.
Use this menu to set the memory location
from which Contacts shows entries.
Dialling speed dial numbers
In Idle mode, press and hold the appropriate
key.
Save new contacts to (Menu #.7.1.2)
Use this menu to select the default memory
location for saving contacts. If you select
Always ask, the phone will ask you to
Own number (Menu #.7.1.4)
Use this menu to check your phone
numbers, or to assign a name to each of the
numbers. Changes made here do not affect
the actual subscriber numbers on your
USIM/SIM card.
Messaging settings (Menu #.7.2)
Use this menu to change the default settings
for using the messaging services.p. 64
Calendar settings (Menu #.7.3)
Use this menu to change the default settings
for the calendar.
• Starting day: select which day of the
week the calendar starts with.
• Default view mode: select the default
calendar view mode.
Settings (Menu #)
select a memory location each time you save
a number.
Menu functions
4. Select a number, if the contact has more
than one number.
107
Menu functions
Camera settings (Menu #.7.4)
Use this menu to change the default settings
for taking photos.p. 85
Camcorder settings (Menu #.7.5)
Use this menu to change the default settings
for recording videos.p. 88
Media Player Settings (Menu #.7.6)
Use this menu to change the default settings
for playing media files in the media player.
p. 46
Browser settings (Menu #.7.7)
Use this menu to select a connection profile
to be used for accessing the Internet. You
can also create or edit a profile.p. 112
Network settings (Menu #.8)
Use this menu to change the settings for
connecting to your cellular network.
Bluetooth (Menu #.8.1)
Using Bluetooth wireless, you can connect
the phone wirelessly to other Bluetooth
108
devices and exchange data with them, talk
hands-free, or control the phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since
the devices communicate using radio waves,
they do not need to be in line of sight to
each other.
• If there are obstacles between the
devices, the operating distance may be
reduced.
• It is recommended that you do not use
the Bluetooth feature while using
multimedia features, such as voice
recorder, camera, and media player, or
vice versa, for the better performance.
• Some devices, especially those that are
not tested or approved by SIG, may be
incompatible with your phone.
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the
Bluetooth feature.
•
•
•
Searching for and pairing with a
Bluetooth device
1. From the Bluetooth menu, select My
devices.
2. Select Search new device.
After searching, a list of devices to which
you can connect displays. The following
icons indicate the type of device:
•
Hands-free car kit or headset
•
Mobile phone
•
Computer
Some devices, especially headsets or handsfree car kits, may have a fixed Bluetooth
PIN, such as 0000. If the other device has
one, you must enter the code.
Settings (Menu #)
•
•
PDA
•
Unknown device
•
Printer
The colour of the icon indicates the
status of the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>.
This code is used just once and you do
not need to memorise it.
When the owner of the other device
enters the same code, pairing is
complete.
Menu functions
•
My devices: search for connectable
Bluetooth devices.
My phone’s visibility: allow other
Bluetooth devices to locate your phone,
or not.
My phone’s name: assign a Bluetooth
device name to your phone, which is
then displayed on other devices.
Secure mode: determine if the phone
asks for your confirmation when other
devices access your data.
Bluetooth service: display available
Bluetooth services.
Using device options
From the device list, press <Options> to
access the following options:
109
Menu functions
•
•
•
•
•
•
•
Connect: connect to a headset or
hands-free car kit.
Disconnect: end the connection with
the connected device.
Browse device: search for data from
the device and import data directly to
your phone.
Service list: access the Bluetooth
service list of the device.
Authorise device/Unauthorise
device: determine whether the phone
asks you to permit connection when
other devices try to connect to your
phone.
Delete: remove the selected device or
all devices from the list.
Rename: rename the selected device.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item
you want to send is stored.
3. Scroll to the item you want and press
<Options>.
4. Select Send contact details/Send/
Send via → Via Bluetooth/Bluetooth.
110
5. Select Search new device.
The phone searches for devices within
range and displays a list of available
devices.
6. Select a device.
7. If necessary, enter the Bluetooth PIN
needed for pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
1. If an unauthorised Bluetooth device
sends data to your phone, press <Yes>
to allow the device to access your phone.
2. Press <Yes> to receive data.
Network selection (Menu #.8.2)
Use this menu to select to either manually
select the network to be used when roaming
outside of your home area, or to let the
network be chosen automatically. You can
select a network other than your home
network only if there is a valid roaming
agreement between the two.
Network mode (Menu #.8.3)
Use this menu to add a new network to your
preferred network list, if your USIM/SIM
card supports it.
Adding a network from the network list
1. From the network list, press <Options>
and select Insert or Add → Network
list.
Creating a network
1. From the network list, press <Options>.
2. Select Insert or Add → New network.
3. Specify network parameters:
• Country code: enter the country
code.
• Network code: enter the network
code provided by the network
operator.
• Network name: enter the name for
the network.
• Network type: select a network
type.
4. Press <Insert> or <Add> to add the
network.
Connections (Menu #.8.5)
Use this menu to create and customise the
profiles containing the settings for
connecting your phone to the network. You
need these settings to use the web browser
or send MMS messages or e-mails.
111
Settings (Menu #)
Preferred networks (Menu #.8.4)
2. Scroll to the network you want and press
<Insert> or <Add>.
Menu functions
Use this menu to select the network you
use:
• Automatic: the phone scans for
available networks.
• GSM 900/1800: the phone operates in
the combined GSM 900/1800 network.
• GSM 1900: the phone operates in the
GSM 1900 network. This option is only
available in the U.S.A.
• UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher
speed quality than on lower generation
networks, and use advanced data and
information services, such as video calls.
Menu functions
Your phone is set up by default for
connecting to the network. If you change the
settings without first checking with your
service provider, the web browser, MMS, and
e-mail features may not work properly.
Creating a profile
1. Press <Options> and select New.
2. Specify profile parameters:
• Set name: enter a profile name.
• Access name: edit the access point
name used for the address of the
GPRS network gateway.
• Auth type: choose the type of
authentication used.
• User ID: enter the user ID.
• Password: enter the user password.
• Protocol: select the protocol from
among WAP, HTTP, and Other.
• Home URL: (WAP and HTTP only)
enter the URL address of the page to
be used as your homepage.
• Gateway address: (WAP only) enter
the gateway address of the proxy
server.
112
•
•
•
•
Proxy address/Port: (HTTP only)
set the proxy server address and
port.
Secure connection: (WAP only)
turn the secure mode on or off.
Linger time (sec.): set a time
period after which the network is
disconnected if there has been no
new data traffic in that time.
Advanced settings: provide you
with the following options:
Static IP: specify if you want to
manually enter an IP address; see
the Local phone IP option. If you
want the IP address to be
automatically assigned by the server,
remove the check mark.
Local phone IP: enter the IP
address obtained from the network
operator, if you selected the Static
IP option.
Static DNS: specify if you want to
manually enter the Domain Name
Server (DNS) address; see the
Server 1/Server 2 option.
If you want the address to be
automatically assigned by the server,
remove the check mark.
Server 1/Server 2: enter the
Domain Name Server (DNS)
addresses.
Traffic class: select the traffic class.
3. Press <Save> to save the profile.
Memory settings (Menu #.9)
Using profile options
Use this menu to check the amount of
memory being used for storing data, such as
messages, media and document files,
Contacts entries, or calendar data. You can
also view the amount of shared memory and
status of a memory card, if inserted into the
phone.
Use this menu to delete data in the phone’s
memory.
Memory status (Menu #.9.2)
Settings (Menu #)
You cannot edit or delete the default
connection profile.
Clear memory (Menu #.9.1)
Menu functions
From the profile list, press <Options> to
access the following options:
• Edit: edit the selected profile.
• New: add a new profile.
• Rename: change the profile name.
• Delete: delete the profile.
• Restore: restore the changed settings
to the default status.
Use this menu to manage your phone’s
memory and a memory card.
Operator settings (Menu #.0)
Use this menu to set a service provider
according to the USIM/SIM card you are
using. When you select a service provider,
the phone will automatically turn itself off
and then back on. You can then see the
profiles corresponding to the service
provider in the connection menus.
113
Menu functions
This menu may not be shown depending on
your service provider.
Master reset (Menu #.*)
Use this menu to reset the phone’s settings
you have changed and clear all data you
have added.
1. Press [OK] to select data you want to
reset.
2. Press <OK>.
3. Enter the phone password and press
<Confirm>.
You can change this password.p. 105
4. Press <Yes>. The phone automatically
turns itself off and then back on.
114
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Please insert SIM card”
• Be sure that the USIM/SIM card is
correctly installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
“PIN lock”
• You are using your phone for the first
time. You must enter the PIN supplied
with the USIM/SIM card.
• The PIN lock feature is enabled. Every
time the phone is switched on, the PIN
has to be entered. To disable this
feature, use the PIN lock menu.
“PUK lock”
• The PIN code was entered incorrectly
three times, and the USIM/SIM card is
now blocked. Enter the PUK supplied by
your service provider.
“No service,” “Network failure,” or
“Not done” displays
•
•
The network connection has been lost.
You may be in a weak signal area. Move
and try again.
You are trying to access an option for
which you have no subscription with your
service provider. Contact the service
provider for further details.
You have entered a number but it
was not dialled
•
•
•
Be sure that you have pressed [ ].
Be sure that you have accessed the right
cellular network.
Be sure that you have not set an
outgoing call barring option.
115
Solve problems
Your correspondent cannot reach you
The audio quality of the call is poor
•
•
•
•
Be sure that your phone is switched on.
([ ] pressed for more than one
second.)
Be sure that you are accessing the right
cellular network.
Be sure that you have not set an
incoming call barring option.
Your correspondent cannot hear you
speaking
No number is dialled when you re-call
a Contacts entry
Be sure that you have switched on the
microphone.
Be sure that you are holding the phone
close enough to your mouth. The
microphone is located at the bottom of
the phone.
•
The phone starts beeping and “Low
battery” flashes on the display
•
•
•
•
116
•
Your battery is insufficiently charged.
Recharge the battery.
Check the signal strength indicator on
the display (
). The number of bars
indicates the signal strength from strong
(
) to weak ( ).
Try moving the phone slightly or moving
closer to a window if you are in a
building.
•
Use the Contacts feature to ensure the
number has been stored correctly.
Re-store the number, if necessary.
The battery does not charge properly
or the phone sometimes turns itself
off
Wipe the charging contacts both on the
phone and on the battery with a clean
soft cloth.
If the above guidelines do not help
you to solve the problem, take note
of:
•
•
•
The model and serial numbers of your
phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Health and safety information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to
not exceed the limits for exposure to radiofrequency (RF) energy, as recommended by
the EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed
by independent scientific organisations
through the periodic and thorough
evaluation of scientific studies. The limits
include a substantial safety margin designed
to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR
limit recommended by the EU Council is
2.0 W/kg.1
117
Health and safety information
The highest SAR value for this model phone
was 0.795 W/kg.
SAR tests are conducted using standard
operating positions with the phone
transmitting at its highest certified power
level in all tested frequency bands. Although
the SAR is determined at the highest
certified power level, the actual SAR level of
the phone while operating can be well below
the maximum value. This is because the
phone is designed to operate at multiple
power levels so as to use only the power
required to reach the network. In general,
the closer you are to a base station, the
lower the power output of the phone.
Before a new model phone is available for
sale to the public, compliance with the
European R&TTE Directive must be shown.
This directive includes as one of its essential
requirements the protection of the health
and safety of the user and any other person.
Precautions when using batteries
•
•
•
•
1. The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary, depending on national reporting
requirements and the network band.
118
Never use a charger or battery that is
damaged in any way.
Use the battery only for its intended
purpose.
If you use the phone near the network’s
base station, it uses less power. Talk and
standby time are greatly affected by the
signal strength on the cellular network
and the parameters set by the network
operator.
Battery charging time depends on the
remaining battery charge, the type of
battery, and the charger used. The
battery can be charged and discharged
hundreds of times, but it will gradually
wear out. When the operation time is
noticeably shorter than normal, it is time
to buy a new battery.
•
•
•
•
•
Do not short-circuit the battery.
Accidental short-circuiting can occur
when a metallic object like a coin, clip or
pen causes a direct connection between
the + and – terminals of the battery
(metal strips on the battery). For
example, do not carry a spare battery in
a pocket or bag where the battery may
contact metal objects. Short-circuiting
the terminals may damage the battery or
the object causing the short-circuiting.
Dispose of used batteries in accordance
with local regulations. Always recycle. Do
not dispose of batteries in a fire.
Road safety
Health and safety information
•
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries,
and recharge your battery only with
Samsung-approved chargers. Disconnect
the charger from the power source when
it is not in use. Do not leave the battery
connected to a charger for more than a
week, since overcharging may shorten
its life.
Extreme temperatures will affect the
charging capacity of your battery: it may
require cooling or warming first.
Do not leave the battery in hot or cold
places because the capacity and lifetime
of the battery will be reduced. Try to
keep the battery at room temperature. A
phone with a hot or cold battery may not
work temporarily, even when the battery
is fully charged. Li-ion batteries are
particularly affected by temperatures
below 0°C (32°F).
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
119
Health and safety information
When you are driving a car, driving is your
first responsibility. When using your wireless
phone while driving, follow local regulations
in the country or region you are in.
Operating environment
Remember to follow any special regulations
in force in the area you are in, and always
switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any
accessory to another device, read its user’s
guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and
for the safety of personnel, it is
recommended that the equipment should
only be used in the normal operating
position (held to your ear with the antenna
pointing over your shoulder).
120
Electronic devices
Most modern electronic equipment is
shielded from radio frequency (RF) signals.
However, certain electronic equipment may
not be shielded against the RF signals from
your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that
a minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference
with the pacemaker. These
recommendations are consistent with the
independent research and recommendations
of Wireless Technology Research. If you
have any reason to suspect that interference
is taking place, switch off your phone
immediately.
Hearing aids
Some digital wireless phones may interfere
with some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
Potentially explosive environments
If you use any other personal medical
devices, consult the manufacturer of your
device to determine if it is adequately
shielded from external RF energy.
Switch off your phone when in any area with
a potentially explosive atmosphere, and
obey all signs and instructions. Sparks in
such areas could cause an explosion or fire
resulting in bodily injury or even death.
Your physician may be able to assist you in
obtaining this information.
Switch off your phone in health care facilities
when regulations posted in these areas
instruct you to do so.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the
manufacturer or its representative regarding
your vehicle.
You should also consult the manufacturer of
any equipment that has been added to your
vehicle.
Posted facilities
Switch off your phone in any facility where
posted notices require you to do so.
Users are advised to switch off the phone
while at a refuelling point (service station).
Users are reminded of the need to observe
restrictions on the use of radio equipment in
fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting
operations are in progress.
Areas with a potentially explosive
atmosphere are often but not always clearly
marked. They include the areas below decks
on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas
where the air contains chemicals or
particles, such as grain, dust or metal
powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
Health and safety information
Other medical devices
121
Health and safety information
Emergency calls
This phone, like any wireless phone,
operates using radio signals, wireless, and
landline networks as well as userprogrammed functions, which cannot
guarantee connection in all conditions.
Therefore, you should never rely solely on
any wireless phone for essential
communications like medical emergencies.
To make or receive calls, the phone must be
switched on and in a service area with
adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services
and/or phone features are in use. Check
with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your
present location. Emergency numbers
vary by location.
3. Press [ ].
122
Certain features like Call Barring may need
to be deactivated before you can make an
emergency call. Consult this document and
your local cellular service provider.
Other important safety information
•
•
•
•
Only qualified personnel should service
the phone or install the phone in a
vehicle. Faulty installation or service may
be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone
equipment in your vehicle is mounted
and operating properly.
Do not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the phone, its parts, or
accessories.
For vehicles equipped with an air bag,
remember that an air bag inflates with
great force. Do not place objects,
including installed or portable wireless
equipment, in the area over the air bag
or in the air bag deployment area.
Improperly installed wireless equipment
could result in serious injury if the air
bag inflates.
•
Care and maintenance
Your phone is a product of superior design
and craftsmanship and should be treated
with care. The suggestions below will help
you fulfill any warranty obligations and allow
you to enjoy this product for many years.
• Keep your phone and all its parts and
accessories out of the reach of small
children and pets. They may accidentally
damage these things or choke on small
parts.
• Keep the phone dry. Precipitation,
humidity, and liquids contain minerals
that corrode electronic circuits.
•
•
•
•
•
•
•
Do not use the phone with a wet hand.
Doing so may cause an electric shock to
you or damage to the phone.
Do not use or store the phone in dusty,
dirty areas, as its moving parts may be
damaged.
Do not store the phone in hot areas.
High temperatures can shorten the life of
electronic devices, damage batteries,
and warp or melt certain plastics.
Do not store the phone in cold areas.
When the phone warms up to its normal
operating temperature, moisture can
form inside the phone, which may
damage the phone’s electronic circuit
boards.
Do not drop, knock, or shake the phone.
Rough handling can break internal circuit
boards.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the phone. Wipe it with a soft cloth.
Do not paint the phone. Paint can clog
the device’s moving parts and prevent
proper operation.
Health and safety information
•
Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because
they can interfere with the operation of
the aircraft.
Failure to observe these instructions may
lead to the suspension or denial of
telephone services to the offender, or
legal action, or both.
123
Health and safety information
•
•
•
•
•
124
Do not put the phone in or on heating
devices, such as a microwave oven,
stove, or radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the
label indicating water damage inside the
phone changes colour. In this case,
phone repairs are no longer guaranteed
by the manufacturer's warranty, even if
the warranty for your phone has not
expired.
If your phone has a flash or light, do not
use it too close to the eyes of people or
animals. This may cause damage to their
eyes.
Use only the supplied or an approved
replacement antenna. Unauthorised
antennas or modified accessories may
damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any
accessory is not working properly, take it
to your nearest qualified service facility.
The personnel there will assist you, and
if necessary, arrange for service.
* Depending on the software installed or your service provider or country, some of the descriptions in
this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations
in this guide.
Printed in Korea
World Wide Web
http://www.samsungmobile.com
Code No.:GH68-13549A
English (SGP). 12/2006. Rev. 1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement