Samsung | TW-H5500 | manual de utilizador | Samsung 350 W 2.2Ch SoundTower H5500 manual de utilizador

TW-H5500
User manual
Wireless Audio - SoundTower
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
SAFETY
INFORMATION
FEATURES
/ SAFETY INFORMATION
FEATURES
TV SoundConnect
TV SoundConnect lets you listen to audio from your TV on your Wireless Audio - SoundTower via a Bluetooth
connection and lets you control the sound.
Special Sound Modes
You can select different sound modes - MUSIC / VOICE / SPORTS / CINEMA / STANDARD(OFF) - depending on the
type of content you want to enjoy.
Multi-function Remote Control
You can use the supplied remote control to control various operations with the simple press of a button.
Bluetooth Function
You can use connect a Bluetooth device to the SoundTower and enjoy music with high quality stereo sound, all without
wires!
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
The lighting flash and arrowhead within the
triangle indicates that there is dangerous
voltage Inside the product.
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
The explanation point within the triangle
indicates that there are important instructions
accompanying the product.
WARNING
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
• This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the
apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug
must be easily and readily accessible at all times.
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
• An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried out.
2
FEATURES
PRECAUTIONS
PRECAUTIONS
REC
Ensure that the AC power supply in your house complies with the power
requirements listed on the identification sticker located on the back of
your product. Install your product horizontally, on a suitable base
(furniture), with enough space around it for ventilation (7~10 cm). Make
sure the ventilation slots are not covered. Do not place the unit on
amplifiers or other equipment which may become hot. This unit is
designed for continuous use. To fully turn off the unit, disconnect the AC
plug from the wall outlet. Unplug the unit if you intend to leave it unused
for a long period of time.
10 cm
10 cm
10 cm
During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage
the unit.
Do not expose the unit to direct sunlight or other heat
sources. This could lead to overheating and cause the
unit to malfunction.
Protect the product from moisture (i.e. vases), and
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Disconnect the power
cable from the AC supply if the unit malfunctions. Your
product is not intended for industrial use. It is for
personal use only. Condensation may occur if your
product has been stored in cold temperatures. If
transporting the unit during the winter, wait approximately
2 hours until the unit has reached room temperature
before using.
The batteries used with this product contain chemicals
that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble, or overheat the
batteries.
There is a danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
3
ENG
7 cm
CONTENTS
CONTENTS
10 CONNECTIONS
2 FEATURES
10
2 SAFETY INFORMATION
Connecting the external components
2
Safety warnings
11 FUNCTIONS
3
Precautions
11
Input mode
12
Bluetooth
5 GETTING STARTED
14
TV SoundConnect
5
Before reading the user’s manual
15
USB
5
What’s included
16
Listening to radio
17
Recording function
17
Software upgrade
6 DESCRIPTIONS
6
Front/side panel
7
Rear panel
18 TROUBLESHOOTING
8 REMOTE CONTROL
19 APPENDIX
8
19
Remote control buttons and functions
9 INSTALLATION
9
Product installation
4
Specifications
GETTING STARTED
GETTING STARTED
ENG
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
++Icons used in this manual
Icon
Term
Caution
Note
Definition
Indicates a situation where a function does not operate or settings may be canceled.
Indicates tips or instructions on the page that help you operate a function.
++Safety Instructions and Troubleshooting
1) Be sure to familiarize yourself with the Safety Instructions before using this product. (See page 2~3)
2) If a problem occurs, check Troubleshooting. (See page 18)
++Copyright
©2014 Samsung Electronics Co.,Ltd.
All rights reserved; no part of this user’s manual may be reproduced or copied without the prior written permission of
Samsung Electronics Co.,Ltd.
WHAT’S INCLUDED
Check for the supplied accessories shown below.
Remote Control /
Lithium Battery (3V : CR2032)
User Manual
AUX Cable
FM Antenna
Power Cord
Extension Cord
●● The appearance of the accessories may differ slightly from the illustrations above.
5
DESCRIPTIONS
DESCRIPTIONS
FRONT/SIDE PANEL
DISPLAY
Displays the current mode.
- If there is no input from the product or
remote control for 15 seconds, the
display will turn off automatically.
- The display will not turn off automatically
in the READY, SEARCH, REQUEST, or
USB PLAYING modes.
USB 1 PORT
USB 2 REC PORT
PLAY/PAUSE BUTTON
Play or pause playing a music file.
REC
POWER BUTTON
Turns the power on
and off.
REC
FUNCTION BUTTON
VOLUME +/-
Selects the D.IN, FM,
USB, AUX,
BLUETOOTH, TV
SOUNDCONNECT, input.
Controls the
volume level.
REC BUTTON
Press this button to use
the recording function.
While the unit is
powered on, pressing
the Function button on
the front panel for
more than 3 seconds
sets the button to act
as MUTE button. To
cancel MUTE button
setup, press the
Function button for
more than 3 seconds
again.
SEARCH/SKIP BUTTON
ove to the previous/
M
next track.
●● When you turn on this unit, do not move this unit and do not touch the back of the unit.
●● If you want to hear sound from the product only, you must turn off the TV's speakers in the Audio Setup
menu of your TV. Refer to the owner's manual supplied with your TV.
6
DESCRIPTIONS
DESCRIPTIONS
ENG
REAR PANEL
AUX IN 2
Connect the Audio Out of the external analog component to the AUX IN
2 jacks.
FM ANT
Connecting the FM Antenna
1. Connect the FM antenna supplied to the FM ANTENNA Jack.
2. Slowly move the antenna wire around until you find a location
where reception is good, then fasten it to a wall or other rigid surface.
SPEAKER OUTPUT CONNECTORS
Connecting the speakers.
ONLY FOR SERVICE
This jack is just for testing, please don't use it.
AUX IN 1
Connect to the Analog output of an external device.
POWER SUPPLY IN
Connect the AC power adaptor to the power supply jack, and
then connect the AC power adaptor plug to a wall outlet.
DIGITAL AUDIO IN (OPTICAL)
Connect to the digital (optical) output of an external device.
●● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
●● For safety information including product identification and supply ratings, please refer to the main label on
the bottom of the device.
7
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
POWER
Turns the product on and off.
SOURCE
Press to select a mode you want.
MUTE
Cut off the sound temporarily.
VOLUME
Adjusts the volume level of the
unit.
SYNC
Used to help sync video to audio
when connected to a digital TV.
USB REC
Press to record the selected file.
SOUND EFFECT
STOP/TUNING MODE BUTTON
Stop playing a music file.
Press this button to select the
"MANUAL" or "PRESET" mode.
Press this button to select the
below sound mode: MUSIC,
VOICE, SPORTS, CINEMA,
STANDARD. Select the
STANDARD mode if you want to
enjoy the original sound. We
recommend that you select a
Sound Effect mode based on the
source material and your personal
taste.
CONTROL BUTTON
Play or pause to play a music file,
or search forwards or backwards
for a music file.
Search for active FM stations.
REPEAT/MO/ST BUTTON
Select Repeat track, dir, All,
Random mode.
Select MONO or STEREO for
radio broadcasting.
Bluetooth POWER
Press this button to select the
BLUETOOTH POWER ON or
BLUETOOTH POWER OFF.
Press and hold this button to
select the POWER LINK ON or
POWER LINK OFF.
ALBUM
Search for album.
++Installing the Batteries in the Remote Control
1. To open the battery
compartment, use a suitable
coin to turn the remote
control's battery cover
counterclockwise as shown in
the figure above.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the 'l' marks side
by side as shown in the figure above.
●● Operate the TV using the TV's remote control.
8
3. To close the battery
compartment, use a suitable
coin to turn the remote
control's battery cover
clockwise as shown in the
figure above.
INSTALLATION
INSTALLATION
ENG
PRODUCT INSTALLATION
Position of the product
Place it on a stand or cabinet shelf, or side the TV stand.
Selecting the Listening Position
●● The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away
from the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m
●● Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the
speakers so that their tweeters will be at the same height as your ear.
++How to install the product
REC
●● Do not let children play with or near the speakers. They could get hurt if the speaker falls.
●● When connecting the speaker wires to the product, make sure that the color is correct.
●● If you place a speaker near your TV set, screen colour may be distorted because of the magnetic
field generated by the speaker. If this occurs, place the speaker away from your TV set.
9
CONNECTIONS
INSTALLATION
CONNECTING THE EXTERNAL COMPONENTS
Method 2
External Devices
Method 3
AUDIO OUT
OPTICAL OUT
R
Red
W
White
Method 1
MP3 Player
Connecting to External Devices
To select the correct mode for an external device after you have connected the device, press the
you press the button, the mode changes in this order :
D. IN ; FM ; USB 1 ; USB 2 ; AUX 1 ; AUX 2 ; BLUETOOTH ; TV SOUNDCONNECT
Three methods of connecting external devices to your product are explained below.
button. Each time
Method 1 AUX IN 1 : Connecting an External Component/MP3 player
Using an audio cable (not supplied), connect the AUX IN 1 jack on the product to the AUDIO Out jack on the external
component/MP3 player.  Select the AUX 1 mode.
Method 2 AUX IN 2 : Connecting an External Analog Component
Using an RCA audio cable (supplied), connect the AUX IN 2 jack on the product to the AUDIO Out jack on the external
analog component.  Select the AUX 2 mode.
•Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 3 OPTICAL : Connecting an External Digital Audio Component
Connect the OPTICAL DIGITAL AUDIO IN jack on the main unit to the OPTICAL OUT of the TV or Source Device.
 Select the D. IN mode.
++ Using the POWER LINK function
If you connect the main unit to a TV with a digital optical cable, set the Power Link function ON to have the SoundTower
turn on automatically when you turn the TV on.
Press and hold the Bluetooth POWER button on the SoundTower remote to turn the POWER LINK function on and off.
The power link function turns on and off each time you press and hold the Bluetooth POWER button.
POWER LINK
Display
ON
POWER LINK ON
OFF
POWER LINK OFF
++ Using the AUDIO SYNC function
Video may appear out of synch with the audio if the SoundTower is connected to a digital TV. If this occurs, adjust the
audio delay time to match the video.
Press the SYNC + / – button on the remote control of this unit.
• You can use the + , - buttons to set the audio delay time between 0 ms and 300 ms.
●● In USB mode, TV mode, FM mode, or BT mode, the Audio Sync function may not work.
●● Do not connect the power cord of this product or your TV to the wall outlet until all connections between
components are complete.
●● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
10
FUNCTIONS
FUNCTIONS
Press the SOURCE button on the remote control or the (
mode you want.
) button on the product's front panel to select the
REC
REC
Input mode
Optical Digital input
FM mode
The unit turns off automatically in the following situations.
Display
●● D.IN/USB 1/USB 2/BLUETOOTH
D.IN
●● /TV SOUNDCONNECT
FM
USB 1 input
USB 1
USB 2 input
USB 2
AUX IN 1 input
AUX 1
AUX IN 2 input
AUX 2
BLUETOOTH mode
BLUETOOTH
TV mode
TV SOUNDCONNECT
-- If none of the buttons are pushed and if there is
no audio signal for more than 25 minutes.
●● AUX Mode
-- When the unit is in AUX mode, if none of the
buttons are pushed for more than 8 hours, the
power will automatically turn off. To turn this
function ON or OFF, press and hold the ENTER
button for 5 seconds in AUX mode, AUTO
POWER DOWN ON / OFF appears on the
display.
11
ENG
INPUT MODE
FUNCTIONS
BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
++To connect the product to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
REC
REC
Bluetooth device
1. Press the SOURCE button on the remote control
or press the (
) button on the product's
front panel to display the
BLUETOOTH
message.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the
Bluetooth device.
Bluetooth device, enter <0000>.
●● Only one Bluetooth device can be paired at a
time.
●● The Bluetooth connection will be terminated
when you turn the product off.
●● Once you have turned off the product and the
pairing is disconnected, the pairing will not be
restored automatically. To reconnect, you
must pair the device again.
●● Once paired the device, on FM/DIN/USB/
AUX mode, select "[Samsung] XXXX" from
the list will automatically change to Bluetooth
mode.
●● The product may not perform Bluetooth
search or connection correctly under the
following circumstances:
-- If there is a strong electrical field around
the product.
-- If several Bluetooth devices are
simultaneously paired with the product.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
-- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
●● The product supports SBC data (44.1kHz,
48kHz).
●● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
●● You cannot connect the product to a
Bluetooth device that supports only the HF
(Hands Free) function.
• You will see a list of scanned devices.
4. Select "[Samsung]SoundTower" from the list.
• When the product is connected to the Bluetooth
device, it will display "Device name" ; "
BT"
on the front display.
• The device name can only be displayed in English.
An underline " _ " will be displayed if the name is not
in English.
• If the Bluetooth device has failed to pair with
the product, delete the previous "[Samsung]
SoundTower" found by the Bluetooth device and
have it search for the product again.
5. Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Wireless Audio
- SoundTower.
• In BLUETOOTH mode, the Play/Pause/Next/Prev
functions are not available. However, these functions
are available in Bluetooth devices supporting
AVRCP.
• Album Skip Forward/Backward function is not
supported in Bluetooth mode.
●● If asked for PIN code when connecting a
12
FUNCTIONS
++Bluetooth POWER On (Bluetooth
POWER)
1. Press the Bluetooth POWER button on the remote
control.
2. BLUETOOTH POWER ON appears on the
SoundTower's display.
●● Available only if the product is listed among
the Bluetooth device’s paired devices. (The
Bluetooth device and the product must have
been previously paired at least once.)
●● The product will appear in the Bluetooth
device’s searched devices list only when the
product is displaying [READY].
●● In the TV SoundConnect mode, the product
cannot be paired to another Bluetooth
device.
●● If the product is connected to a TV through
TV SoundConnect, and you turn the product
off by turning off the TV, the Bluetooth Power
function will not turn the SoundTower on.
++To disconnect the Bluetooth
device from the product
You can disconnect the Bluetooth device from the
product. For instructions, see the Bluetooth device's user
manual.
●● The product will be disconnected.
●● When the product is disconnected from the
Bluetooth device, the product will display
DISCONNECTED on the front display.
More About Bluetooth
Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect easily with each other
using a short wireless connection.
●● A Bluetooth device may cause noise or malfunction,
depending on usage, when:
-- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the product.
-- It is subject to electrical variation from
obstructions caused by a wall, corner, or office
partition.
-- It is exposed to electrical interference from same
frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
●● Pair the product with the Bluetooth device while they
are close together.
●● The further the distance between the product and
Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
●● In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
●● The Bluetooth connection only works when it is close
to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within
range, the sound quality may be degraded by
obstacles such as walls or doors.
●● This wireless device may cause electric interference
during its operation.
++To disconnect the product from
the Bluetooth device
Press the SOURCE button on the remote control or
press the (
) button on the product's front panel to
switch from BLUETOOTH to another mode or turn off
the product.
●● The connected Bluetooth device will wait a certain
amount of time for a response from the product
before terminating the connection. (Disconnection
time may differ, depending on the Bluetooth device)
13
ENG
When the Bluetooth Power On function is on and the
product is turned off, if a previously paired Bluetooth
device tries to pair with the product, the product turns on
automatically.
●● In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the product and the Bluetooth device
exceeds 5 m.
FUNCTIONS
TV SOUNDCONNECT
You can enjoy TV sound through your product when it is connected to a Samsung TV that supports the TV
SoundConnect function.
++Connecting a TV to the product
REC
TV SOUN
Connect
1. Turn on the TV and product.
• Set the "Add New Device" menu selection of the TV to
"On".
●● TV SoundConnect Operational Range
-- Recommended pairing range: within
50 cm.
-- Recommended operational range: within
5 m.
●● Play/Pause, Next, Prev buttons are not
operable in TV SoundConnect mode.
2. Press the SOURCE button on the remote control or
press the (
) button on the product's front panel
to select the
TV SOUNDCONNECT mode.
3. On the TV, a message asking whether to enable the
TV SoundConnect function appears. "[Samsung]
SoundTower" is displayed on the TV screen.
4. Select <Yes> using the TV remote to finish connecting
the TV and product.
●● Switching the product’s mode from TV to
another automatically terminates TV
SoundConnect.
●● To connect the product to another TV, the
existing connection must be terminated.
●● Terminate the connection to the existing TV,
press and hold the ENTER (
) button for 5
seconds to reset the TV SoundConnect
connection.
●● The TV SoundConnect (SoundShare) function is
supported by some Samsung TVs released from
2012 on. Check whether your TV supports the TV
SoundConnect (Soundshare) function before you
begin. (For further information, refer to the TV’s
user manual.)
●● If your Samsung TV was released before 2014,
check the SoundShare setting menu.
●● If the distance between the TV and product
exceeds 16.25 ft. (5m), the connection may not
be stable or the audio may stutter. If this
occurs, relocate the TV or product so that they
are within operational range, and then
re-establish the TV SoundConnect connection.
++Using the Bluetooth POWER On
with TV SoundConnect.
The Bluetooth POWER On function is available after you
have successfully connected the product to a Bluetooth
compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON, turning
the connected TV on or off will turn the product's power
on and off as well.
1. Connect the TV with your product using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the remote
control. "BLUETOOTH POWER ON" appears on
the product's display.
• BLUETOOTH POWER ON : The product turns on
and off when you turn the TV on or off.
14
• BLUETOOTH POWER OFF : The product only
turns off when you turn the TV off.
●● This function is supported only by some
Samsung TVs released from 2013 on.
●● If the product is connected to a TV through TV
SoundConnect, and you turn the product off by
turning off the TV, the Bluetooth Power function
will not turn the product on, even if you connect
another Bluetooth device to it.
FUNCTIONS
USB
Display
USB port
USB 1
REC
REC
• Some USB devices (USB HDDs, in particular) may
cause a delay when moving from track to track.
• With USB storage devices supporting USB VER1.1
only, the product may access files slowly or may not
recognize the file properties.
• The maximum electrical current provided by each
USB port to connected USB devices is 0.5 A (based
on DC 5 V).
• If there is no USB connection or STOP mode lasts for
more than 25 minutes, the product will automatically
turn off.
• Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones may not
be supported.
• File Format Type Compatibility list:
++Before you begin! 1. Connect the USB device to the USB 1 port or
the USB 2 port on the side of the product.
2. Press the SOURCE button on the remote
control or the (
) button on the product's
front panel repeatedly until
USB 1 or
USB 2 appears.
• The product connection to the USB device is
complete.
• The first track of the first directory plays
automatically,
++Before you connect a USB device
Be aware of the following:
• Some USB devices may not work properly with this
product.
• This product only supports external HDD`s that are
formatted in the FAT file system.
• USB 2.0 HDDs should be connected to a separate
power source. Otherwise, the USB 2.0 HDDs will not
work.
• If multiple USB external storage devices are
connected together, only the MP3 files in the first
HDD will be played.
• Files with DRM are not supported. Digital Right
Management (DRM) restricts unauthorized access to
a DRM file so that the file is protected from piracy.
• Even if a file has an .mp3 extension, the file cannot
be played if it is formatted in MPEG layer 1 or 2.
• Do not use an unrecognized USB hub.
• Only the first 15 characters of an audio file name are
shown on the product's display.
• Only removable HDDs with less than 160GB are
supported. Depending on the device, a 160GB- or
more removable HDD may not be supported.
• It can take several minutes for the product to
recognize the files on some USB devices.
15
File
Extension
Audio
Codec
MPEG 1 Layer3
*.mp3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.wma
Wave_Format_
MSAudio1
Wave_Format_
MSAudio2
Sampling
Rate
Bit Rate
16KHz ~
48KHz
80Kbps ~
320Kbps
16KHz ~
48KHz
80Kbps ~
320Kbps
16KHz ~
48KHz
16KHz ~
48KHz
16KHz ~
48KHz
80Kbps ~
320Kbps
56Kbps ~
128Kbps
56Kbps ~
128Kbps
• Does not support WMA Professional codec.
• The above table shows supported sampling rates
and bit rates. Files of not supported formats may not
be played properly.
ENG
Connect an external storage device such as a USB flash memory or external HDD (Hard Disk Drive) to the product.
You can play files in MP3/WMA format.
FUNCTIONS
++To stop playing
LISTENING TO RADIO
1. Press the STOP ( @ ) button to stop playing.
You can store up to: 15 FM stations.
++To remove the USB device
1. Press the SOURCE button on the remote control
or the (
) button on the product's front panel
repeatedly until "
FM" appears.
2.
1. Press the STOP ( @ ) button twice while the USB is
playing or press the STOP ( @ ) button once when
play has stopped.
2. When the REMOVE message appears on the
display, remove the USB device.
++To Select a Track from a USB
Device
You can select an MP3 file during play.
1. If you want to move to the previous/next track,
press the TUNING [,] buttons briefly.
• The unit moves to the previous/next file within the
directory.
1. P
ress the ALBUM $ or % button on the remote
control to move to the previous/next folder.
2. W
hen the search is done, you will see the previous/
next folder name. The track will start playing.
• When sound files are stored in the root directory
rather than in a folder, press the ALBUM $ or %
button to go to the first TRACK.
++To Repeat
1. P
ress the REPEAT button on the remote control.
Each time you press the REPEAT button, the repeat
mode will change as follows:
Preset
One or more times until PRESET is displayed. You can search the stored
frequencies in the Preset mode.
Manually
One or more times until MANUAL is
displayed. You can search the
frequencies one by one in the Manual
mode.
control to select the preset station.
• Press and hold the TUNING [ or ] button on
the remote control to automatically search for active
broadcasting stations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
• This applies only when listening to an FM station. 5. If you do not want to store the radio station found,
return to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING [ or ] button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store additional radio frequencies, repeat Steps 3
through 5.
mode
➣➣In• Tuner
In the Manual mode, you can use the
[ or ] button
on the main unit to manually search for a radio station.
• In the Preset mode, you can use the [ or ] button
on the main unit to search for a stored radio station. OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function, press
the REPEAT button until "OFF" is displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected
folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
Press the TUNING MODE button
3. Select the station to be stored by:
• Pressing the TUNING [ or ] button on the remote
• If you press the TUNING [,] buttons more times
than the number of the files in the directory, the unit
moves to the next directory.
++To Move to the Next/Previous
Folder
To search
for a station
++Selecting a Stored Station
You can listen to a stored radio station.
1. Press the SOURCE button on the remote control
or the (
) button on the product's front panel
repeatedly until "
FM" appears.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. P
ress the [ or ] button on the main unit or the
TUNING [ or ] on the remote control to select a
desired preset number.
16
FUNCTIONS
RECORDING FUNCTION
●●
●●
●●
●●
• Select
FM by pressing the the SOURCE button
on the remote control or the (
) button on the
product's front panel.
• Tune to a station you want to record.
●●
External Source
• Connect an External Component/MP3 player to your
product.
• Press the SOURCE button on the remote control
or the (
) button on the product's front panel
repeatedly to select <
AUX 1> input or
<
AUX 2> input.
• Play a song from the external device.
USB 1
• Connect a USB device to the USB 1 jack of your
product
• Press the SOURCE button on the remote control
or the (
) button on the product's front panel
repeatedly to select <
USB 1> input.
• Play a song from USB 1.
3. Press the USB REC button on the remote control
to start recording.
USB 1
• Press the USB REC button on the remote control.
The currently playing file is copied onto the USB 2
device.
• Press and hold the USB REC button. All the files
in the current folder are copied onto the USB 2
device. "COPY" is displayed. When the recording is done,
“@” will be displayed. • If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
●●
SOFTWARE UPGRADE
Samsung may offer upgrades for the Wireless Audio SoundTower system firmware in the future.
If an upgrade is offered, you can upgrade the firmware
by connecting a USB drive with the firmware upgrade
stored on it to the USB port on your product.
Note that if there are multiple upgrade files, you must
load them onto the USB drive singly and use them to
upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung call
center to receive more information about downloading
upgrade files.
USB port
REC
Tuner
• "FM RECORD" is displayed.
External Source
• "AUX RECORD" is displayed.
4. T
o stop recording, press the STOP (@) button on
the remocon or the PLAY/PAUSE (p) button on
the product's front panel. The unit automatically
creates and saves recorded files in .MP3 format
(SAM-XXXX.MP3). After recording, a directory
named “COPY”(USB), “TUNER RECORDING” or
“AUX RECORDING” is created on your USB device.
●● Do not disconnect the USB device or the AC Cord
during recording as this may cause damage to the
file.
●● If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
17
●● Insert a USB drive containing the firmware upgrade into
the USB port on the main unit.
●● Do not disconnect the power or remove the USB drive
while upgrades are being applied. The main unit will turn
off automatically after completing the firmware upgrade.
●● When software is upgraded, settings you have made will
return to their default (factory) settings.
●● We recommend you write down your settings so that
you can easily reset them after the upgrade.
●● Once upgrading the product software is completed, turn
on the product and then press and hold (@) button for a
while in USB 1 mode to reset the product.
●● If the firmware fails to upgrade, we recommend
formatting the USB device in FAT16 and trying again.
●● For upgrading purposes, do not format the USB drive in
NTFS format because it is not a supported file system.
●● Depending on the manufacturer, some USB devices
may not be supported.
ENG
You can record from the radio broadcast, or an external
source to a USB storage device.
1. Connect an external USB storage device to the
USB 2
port on your product.
2. Tune to a station, or connect an external source to
your product.
Tuner
cannot be deleted. If this occurs, please connect the
USB device to a PC and backup the data stored in
the USB first, and then format it.
When the USB memory has insufficient free space,
the system will display “NOT ENOUGH MEMORY”.
The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system
is not supported.
The recording time may be longer with some USB
devices.
The REPEAT and SOUND EFFECT function is set to
"OFF" automatically and is not available during
recording.
Note that setting the input level too loud when
recording music from an external device through the
AUX or USB channel may cause noise in the
recording. If this occurs, lower the external device’s
volume level.
The maximum TUNER/AUX recording time is 5 hours.
TROUBLESHOOTING
TROUBLESHOOTING
Refer to the table below when this product does not function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help, turn off the product, disconnect the power cord and
contact the nearest authorized dealer or Samsung Electronics Service Centre.
The unit will not turn on.
• Is the power cord plugged into the outlet?
¼¼Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
¼¼Disconnect the power plug and connect it again.
Sound is not produced.
• Is the Mute function on?
¼¼Press the Mute button to cancel the function.
• Is the volume set to minimum?
¼¼Adjust the volume.
The remote control does not work.
• Are the batteries drained?
¼¼Replace with new batteries.
• Is the distance between the remote control and main
unit too far?
¼¼Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
¼¼TV SoundConnect is supported by some Samsung
TVs released after 2012. Check your TV to see if it
supports TV SoundConnect.
• Is your TV firmware the latest version?
¼¼Update your TV with the latest firmware.
• Does an error occur when connecting?
¼¼Contact the Samsung call center.
• Reset the TV MODE and connect again.
¼¼Press and hold the ENTER (
) button for 5
seconds to reset the TV SoundConnect connection.
Can't receive radio broadcast.
• Is the antenna connected properly?
¼¼If the antenna's input signal is weak, install an
external FM antenna in an area with good reception.
18
APPENDIX
APPENDIX
Model name
ENG
SPECIFICATIONS
TW-H5500
5 V/0.5 A
USB
Weight
GENERAL
Dimensions
(W x H x D)
Main unit
14.5 Kg
Speaker
13.2 Kg
Main unit
202 × 981 × 295 mm
Speaker
202 × 981 × 283 mm
Operating temperature range
+5 °C to +35 °C
Operating humidity range
10 % to 75 %
Rated output
power
AMPLIFIER
Front Speak
75 W (THD = 10 %, 1 kHz)
Subwoofer
100 W (THD = 10 %, 100 Hz)
S/N ratio (analog input)
65 dB
Separation (1kHz)
50 dB
* S/N ratio, distortion, separation, and usable sensitivity are based on measurements using AES (Audio Engineering
Society) guidelines.
* Nominal specification
-- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-- Weight and dimensions are approximate.
-- For the power supply and Power Consumption, refer to the label attached to the product.
Open Source Announcement
To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
19
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
` MENA
U.A.E
OMAN
KUWAIT
BAHRAIN
QATAR
EGYPT
ALGERIA
PAKISTAN
TUNISIA
JORDAN
SYRIA
IRAN
MOROCCO
SAUDI ARABIA
TURKEY
` Africa
NIGERIA
GHANA
COTE D’ IVOIRE
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MOZAMBIQUE
Area
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
30308282 -Non Toll Free
0800112888
021-56997777
0120-327-527
1800-88-9999
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline and Mobile]
02-4222111 [Other landline]
1800-SAMSUNG (726-7864)
0-2689-3232,
1800-29-3232
0800-32-9999
1800 588 889
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255 (183-CALL)
8000-4726
800-2255 (800-CALL)
08000-726786
16580
021 36 11 00
0800-Samsung (72678) 80-1000-12 0800-22273
06 5777444
18252273
021-8255
080 100 2255
920021230
444 77 11
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 545 545
0800 300 300
0685 88 99 00
9999
200
499999
1969
0860-SAMSUNG (726-7864)
8007260000
08 197 267 864
0211 350370
847267864 / 827267864
Web Site
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/cn/support
www.samsung.com/hk /support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/in/support
www.samsung.com/id/support
www.samsung.com/jp /support
www.samsung.com/my /support
www.samsung.com/ph /support
www.samsung.com/sg /support
www.samsung.com/th /support
www.samsung.com/tw /support
www.samsung.com/vn /support
www.samsung.com/ae /support (English)
www.samsung.com/ae_ar /support (Arabic)
www.samsung.com/eg /support
www.samsung.com/n_africa /support
www.samsung.com/pk /support
www.samsung.com/n_africa /support
www.samsung.com/Levant /support (English)
www.samsung.com/Levant /support (English)
www.samsung.com/iran /support
www.samsung.com/n_africa /support
www.samsung.com/sa /support
www.samsung.com/sa_en /support (English)
www.samsung.com/tr/support
www.samsung.com/africa_en/support
www.samsung.com/africa_fr /support
www.samsung.com/support
www.samsung.com/support
Download PDF

advertising