Advertisement
Advertisement
816H-00Cover.qxd 2/24/05 11:23 AM Page 1
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
ELECTRONICS
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
LCD TV
LA15S51B
LA20S51B
Owner’s Instructions
BN68-00816H-00
ON-SCREEN MENUS
PC DISPLAY
TELETEXT
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
00-BN68-00816H-00Eng.qxd 2/24/05 11:14 AM Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Digital Ready TV: When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the set-top box output is 480p).
• Digital Ready TV: When you select the wide screen (16:9) mode to watch an SD-grade digital broadcast (and the set-top box output is 1080i).
Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped.
Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
• Digital Ready TV: When the
TV receives HD-grade signals
(and the set-top box output is 1080i).
When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen size
"16:9" or "Panorama" selected, you will be able to watch the program but the top and bottom edges of the screen will be cropped.
Note : If the borders at the top, bottom and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
00-BN68-00816H-00Eng.qxd 2/24/05 11:14 AM Page 2
• Integrated Digital TV
(Wide-screen): When the TV receives SD-grade (regular) broadcasting signals (receives
480p regular signals).
• Digital Ready TV (wide-screen): digital TV: When the TV receives
SD-grade (regular) broadcasting signals (with a set-top box).
• When you watch an analog
(regular) broadcast on a wide-screen TV (with the 4:3 screen mode selected).
• When you watch a DVD, CD or a video in wide screen (21:9) format on a wide-screen (16:9) TV.
• When you connect a computer or a game console to the TV and select the 4:3 screen mode.
Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped.
Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
If you connect a DVD player, computer or a game console to the wide-screen TV and watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left and right side edges, or the top and bottom edges of the screen will be cropped.
Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 2
Contents
◆ C
ONNECTING AND
P
REPARING
Y
OUR
TV
■ Viewing the Control Panel .............................................................................
■ Viewing the Connection Panel ......................................................................
- Connecting an Aerial or Cable Television Network....................................
■
■
■
■
■
■
■
■
■
■
- Connecting Component Device
(DVD - 480i, 480p, 576i, and 576p only supported) ..........................................
- Connecting a Computer .............................................................................
- Connecting External A/V Devices ..............................................................
- Kensington Slot..........................................................................................
Viewing Pictures From External Sources......................................................
Inserting the Batteries in the Remote Control ...............................................
Viewing the Remote Control (All Functions Except Teletext)........................
Viewing the Remote Control (Teletext Functions) .........................................
Switching On and Off ....................................................................................
Placing in Standby Mode ..............................................................................
Becoming Familiar with the Remote Control.................................................
Plug & Play....................................................................................................
Selecting TV Mode or an Input Source .........................................................
Editing an Input Source Name ......................................................................
◆ S
ETTING THE
C
HANNELS
■ Storing Channels Automatically.....................................................................
■
■
Storing Channels Manually ...........................................................................
Editing the Channels .....................................................................................
■ Sorting the Stored Channels .........................................................................
◆ S
ETTING THE
P
ICTURE
■ Changing the Picture Standard .....................................................................
■
■
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
18
19
21
22
23
24
25
11
12
12
13
14
16
17
9
10
7
8
6
6
7
4
5
6
◆ S
ETTING THE
S
OUND
■ Changing the Sound Standard......................................................................
■ Selecting Auto Volume Control......................................................................
26
27
◆ S
ETTING THE
T
IME
■ Setting the Clock ...........................................................................................
■ Switching Off Automatically ...........................................................................
■ Switching the Television On and Off Automatically .......................................
28
29
30
English-2
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 3
Contents
◆ U
SING THE
V
ARIOUS
F
UNCTIONS
■ Setting the Blue Screen Mode ......................................................................
■ Displaying Information...................................................................................
◆ U
SING THE
T
ELETEXT
F
EATURE
■ Teletext Feature.............................................................................................
■
■
Displaying the Teletext Information ...............................................................
Selecting a Page by Number ........................................................................
■
■
Using FLOF to Select a Page .......................................................................
Storing Teletext Pages ..................................................................................
◆ U
SING THE
PC F
UNCTIONS
■ Setting Up Your PC Software ........................................................................
■ Coarse and Fine Tuning of the Image...........................................................
■
■
Changing the Image Position ........................................................................
Initializing the Image Settings .......................................................................
■
■
Adjusting the PC Screen Automatically.........................................................
Picture Mode .................................................................................................
■
■
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
■ Customizing the colour..................................................................................
◆ R
ECOMMENDATIONS
F
OR
U
SE
■ Troubleshooting: Before Contacting Service Personnel ...............................
■
■
Power Saver..................................................................................................
Technical and Environmental Specifications .................................................
■
■
Display Modes...............................................................................................
Retractable Stand .........................................................................................
■
■
Using Your TV in Another Country ................................................................
Using the Anti-Theft Kensington Lock ...........................................................
■
■
Installing VESA compliant mounting devices ................................................
Installing the Wall Mount Kit ..........................................................................
31
31
32
33
34
35
35
40
41
41
42
43
36
37
38
39
44
45
46
47
48
48
49
50
51
Symbols
Press Important Note
English-3
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 4
Viewing the Control Panel
SOURCE
Displays a menu of all of the available input sources
(TV - AV - S-Video - Component - PC).
You can also use the SOURCE( ) button on the TV’s control panel to make selections.
MENU
Press to see an on-screen menu of your TV’s features.
- +
Moves the selector left or right on the OSD.
Decreases or increases the level of audio volume and the values of the selected function.
Moves the selector down or up on the OSD.
Decreases or increases the channel number.
POWER
Turns ON/OFF your set.
SPEAKERS
HEADPHONE
REMOTE CONTROL SENSOR
Aims the remote control towards this spot on the TV.
POWER INDICATOR
Lights up when you turn the power off.
(Red light shows in stand-by mode, Red shows when you turn the power on, and light is off after the power is on. Green shows when you set Timer on or off.)
English-4
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 5
Viewing the Connection Panel
<LA15S51B>
Option
Power Input
<LA20S51B>
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
English-5
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 6
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model).
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Component Device (DVD - 480i, 480p, 576i, and 576p only supported).
- Connect component video cables to component connector (“Y”, “P
B
”, “P
R
”) on the rear of your set and the other ends to corresponding component video out connectors on the DVD.
- The Y, P
B and P
R connectors on your component device (DVD) are sometimes labeled Y, B-Y and R-Y or Y,
Cb and Cr.
- Connect RCA audio cables to “AUDIO(L)” and “AUDIO(R)” on the rear of your set and the other ends to corresponding audio out connectors on the DVD.
- Input signals not supported: 720p, 1080i, and 1080p.
Connecting a Computer.
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to the “PC AUDIO IN (STEREO)” jack on the rear of your set and the other end to the “Audio Out” jack of the sound card on your computer.
➣
15 Pin D-SUB connector
Pin
7
8
9
10
11
1
2
3
4
5
6
12
13
14
15
Separate H/V
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal Sync.
Vertical Sync.
DDC - SCL (Clock)
Composite H/V
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal/Vertical Sync.
Not used
DDC - SCL (Clock)
English-6
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 7
Viewing the Connection Panel
Connecting External A/V Devices.
- Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD or Camcorder.
- Connect RCA audio cables to “(MONO)L-AUDIO-R” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.
Kensington Slot.
- This television has been designed to apply a burglarproof lock. (See page 49)
English-7
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 8
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input.
1
2
Check that all the necessary connections have been made
(refer to pages 6 and 7 for further details).
Press the TV button to choose TV mode.
Press the SOURCE button to choose Video mode.
The input sources are displayed in the following order:
TV - AV - S-Video - Component - PC
English-8
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 9
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
Purchase your set.
Find that the remote control is no longer operating correctly.
1
2
3
Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it.
Install two AAA size batteries.
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
Replace the cover by aligning it with the base of the remote control and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
English-9
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 10
Viewing the Remote Control
(All Functions Except Teletext)
Television On/Off
Numeric buttons for direct channel access
One/Two-digit channel selection
Temporary sound switch-off
Volume up or down
Select to the TV mode directly
Menu display and change confirmation
Sound mode selection
Previous channel
-Next channel
-Previous channel
Available source selection
Use to see information on the current broadcast.
Exit the OSD
Control the cursor in the menu
Automatic switch-off
Sound effect selection
Picture effect selection
English-10
The performance of the remote control may be affected by bright light.
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 11
Viewing the Remote Control
(Teletext Functions)
Teletext hold
Exit from the teletext display
Teletext index
Teletext sub page
Teletext display/mix both teletext information and the normal broadcast
Fastext topic selection
P : Teletext next page
P : Teletext previous page
Teletext mode selection
(LIST/FLOF)
Teletext reveal
Teletext store
Teletext size selection
English-11
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 12
Switching On and Off
The mains lead is attached to the rear of your set.
1
2
3
Plug the mains lead into an appropriate socket.
Result: When the power cord is plugged in, the LED turns red.
Press the POWER button to switch on.
To switch off, press the POWER button again.
Placing in Standby Mode
Your set can be placed in Standby mode in order to reduce the power consumption.
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1
2
Press the POWER button.
To switch back on, simply press the POWER button again, a numeric button, or channel or button.
Do not leave your set in Standby mode for long periods of time.
(when you are away on holiday, for example)
Turn off by pressing the POWER button.
It is best to unplug the set from the mains and aerial.
English-12
01-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and their functions.
Button
PRE-CH
- 9
-/--
MUTE
MENU
EXIT
Viewing Function Menu Function
Used to display the next stored channel.
Used to display the previous stored channel.
-
-
Used to switch repeatedly between the last two channels displayed. (PRE-CH; Previous Channel)
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to increase the volume.
Used to decrease the volume.
-
-
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or press the + or - button.
Used to display the on-screen menu system.
Used to return to the previous menu or normal viewing.
Used to exit the menu system and return directly to normal viewing.
Used to move among the menu items.
Used to select a menu item or increase the value of the selected item.
Used to return to the previous menu item or decrease the value of the selected item.
English-13
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 14
Plug & Play
When the set is initially powered ON, you are automatically presented with a series of basic customer settings.
The following settings are available.
1
2
3
4
5
6
7
8
If the set is in standby mode, press the POWER button on the remote control.
Result: The message Plug & Play is displayed.
It appears for a little while, and then the
“Check antenna input.” menu is automatically displayed.
The message “Check antenna input.” is displayed with OK selected.
Press the ENTER button.
Result: The Area menu is displayed:
Asia/W. Europe - CIS/E. Europe - China -
Hong Kong/UK - Australia - NZL/Indonesia -
South Africa - America
Select your Area by pressing the or button.
Press the ENTER button.
Result: The Auto Store menu is displayed.
Press the ENTER button.
Result: The channel search will start and end automatically.
Press the ENTER button.
Select the Hour, Minute or am/pm by pressing the or button.
Set the Hour, Minute or am/pm by pressing the or button.
(Refer to “Setting the Clock” on page 28)
Press the MENU button to confirm your setting.
Result: The message “Enjoy your viewing” is displayed, and then the channel which has been stored will be activated.
Press the EXIT button to return to normal viewing.
English-14
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 15
Plug & Play
If you want to reset this feature...
1
2
3
4
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select the Plug & Play.
Press the ENTER button.
Result: The message Plug & Play is displayed.
For further details on how to set up this feature, refer to the previous page.
English-15
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 16
Selecting TV Mode or an Input Source
You can choose TV mode or change to an input source connected to the TV set. Use this button to choose an input source that you would like to watch.
1
2
3
4
Press the MENU button.
Result: The main menu is displayed.
Press the ENTER button to select the Input.
Result: The options available in the Input group are displayed.
Press the ENTER button.
Result: The Source List is selected.
Press the or button to move to the input source that you wish to choose.
Press the ENTER button.
Result: The input source changes to the one you have chosen.
English-16
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 17
Editing an Input Source Name
Entering the names of the input source devices connected to the input ports on the TV set allows you to find and choose an input source that you would like to watch in a quick and convenient manner.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the ENTER button to select the Input.
Result: The options available in the Input group are displayed.
Press the or button to select the Edit Name.
Press the ENTER button.
Press the or button to move to the input source that you wish to edit.
Press the ENTER button.
Result: The following options are available:
AV - S-Video - Component - PC
Select the required device by pressing the or repeatedly.
Result: The following options are available:
---- - VCR - DVD - Cable STB - HD STB -
Satellite STB - AV Receiver - DVD Receiver -
Game - Camcorder - DVD Combo - DHR - PC
When you are satisfied with your choice, press the EXIT button to return to normal viewing.
English-17
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 18
Storing Channels Automatically
40
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any channels you do not wish to watch.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select Auto Store.
Press the ENTER button.
Result: The Start is selected.
Press the ENTER button to search the channels.
The sub menu is changed from Start to Stop with channel search started.
Result: The search will end automatically.
Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed.
To stop the search before it has finished, press the ENTER button to search the channels.
When the channels have been stored, you can:
Add or delete the channels (refer to page 21)
Sort them in the order required (refer to page 22)
Press the EXIT button to return to normal viewing.
English-18
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 19
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1
2
3
4
5
6
7
8
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select the Manual Store.
Press the ENTER button.
Result: The options available in the Manual Store group are displayed with the Prog. selected.
Press the ENTER button again.
To assign a programme number to a channel, find the correct number by pressing the or button and then press the
ENTER button.
Press the or button to select Colour System.
Press the ENTER button.
Select the Colour System required by pressing the or button repeatedly and then press the ENTER button.
Result: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58
Press the or button to select Sound System.
Press the ENTER button.
Select the Sound System required by pressing the or button repeatedly and then press the ENTER button.
Result: The sound standards are displayed in the following order:
BG - DK - I - M
For all the channels to move to the required channel numbers, repeat steps 5 to 7 after selecting Prog. by pressing the or button.
English-19
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 20
Storing Channels Manually
9 If you know the channel number to be stored,
Press the or button to select the Channel.
Press the ENTER button.
Select C (Air channel) or S (Cable channel) by pressing the or button and then press the ENTER button.
Press the button to select the Channel.
Select the required number by pressing the or button and then press the ENTER button.
If there is abnormal sound or no sound, re-select the sound system required.
10 If you do not know the channel numbers, press the or button to select Search.
Press the ENTER button.
Start the Search by pressing the or button.
Press the ENTER button.
Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen.
11 Press the or button to select Store.
Press the ENTER button.
The OK is selected.
Result: The channel and associated programme number are stored.
12 Repeat Steps 9 to 11 for each channel to be stored.
13 Press the EXIT button to return to normal viewing.
Channel mode
P (Programme mode): When tuning is completed, the broadcasting stations in your area will have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Real channel mode): You can select a channel by entering the assigned number to each broadcast station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number to each cable channel in this mode.
English-20
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 21
Editing the Channels
You can exclude any channels of your choice from the channels you have scanned. When you scan through the stored channels, those you have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed during scanning.
3
4
1
2
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
Press the or button to select Add/Delete.
Press the ENTER button.
Result: The state of the current channel is displayed.
Press the or button to select the channel that you wish to
Add or Delete.
Result: If the channel that you wish to edit is not in memory, add is selected and displayed.
Otherwise, if the channel that you wish to edit is in memory,
Delete is selected and displayed.
Press the ENTER button to Add or Delete the channel. 6
7 Repeat Step 5 and 6 for each channel to be added or erased.
8 Press the EXIT button to return to normal viewing.
English-21
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 22
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
Assign easily remembered numbers to the channels that you watch most often.
1
2
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Channel.
Result: The options available in the Channel group are displayed.
Press the ENTER button.
3
4
5
6
Press the or button to select Sort.
Press the ENTER button.
Result: The current Prog. and Channel are displayed.
Select the channel number that you wish to change by pressing the or button repeatedly.
Press the ENTER button.
Result: The selected Channel is moved to the right side.
Press the or button to move to the position which you would like to change and then press the ENTER button.
Result: The selected channel is exchanged with the one previously stored to the chosen number.
7 Repeat step 5 to 6 for another channel to sort again.
8 Press the EXIT button to return to normal viewing.
English-22
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 23
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1
2
3
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Result: The Mode is selected.
4
5
Press the ENTER button.
Select the required picture effect by pressing the or button repeatedly.
Press the ENTER button.
Result: The following picture effects are available:
Dynamic - Standard - Movie - Custom
6 Press the EXIT button to return to normal viewing.
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
English-23
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 24
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Custom.
Press the ENTER button.
Select the option (Contrast, Brightness, Sharpness, or
Colour) to be adjusted by pressing the or button.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to reach the required setting.
When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
If you make any changes to these settings, the picture standard is automatically switched to Custom.
English-24
02-BN68-00816H-00Eng.qxd 2/24/05 11:15 AM Page 25
Adjusting the Screen Background Colour
You can change the screen background colour according to your preference.
1
2
3
4
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Colour Tone.
Press the ENTER button.
Result: The following options are available:
Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2
When you are satisfied with your choice, press the EXIT button to return to normal viewing.
English-25
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 26
Changing the Sound Standard
You can select the type of special sound effect to be used when watching a given broadcast.
1
2
3
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Sound.
Result: The options available in the Sound group are displayed.
Press the ENTER button.
Result: The Mode is selected .
4
5
Press the ENTER button.
Select the required sound effect by pressing the or button repeatedly.
Press the ENTER button.
Result: The following sound effects are available:
Standard - Speech
6 Press the EXIT button to return to normal viewing.
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
English-26
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 27
Selecting Auto Volume Control
Reduces the differences in volume level between broadcasters.
3
4
1
2
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Sound.
Result: The options available in the Sound group are displayed.
Press the ENTER button.
Press the or button to select Auto Volume.
Press the ENTER button.
5 Press the or button to select Off/On.
Press the ENTER button.
6 Press the EXIT button to return to normal viewing.
English-27
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 28
Setting the Clock
You can set the TV’S clock so that the current time is displayed when you press the "INFO" button. You must also set the time if you wish to use the automatic On/Off timers.
If you disconnect the power cord, you have to set the clock again.
1
2
5
6
3
4
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the ENTER button.
Result: The Time menu is displayed with Clock selected.
Press the ENTER button.
To...
Move to Hour, Minute or am/pm
Set the hour, minute or am/pm
Press the...
or button or button
When you have satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-28
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 29
Switching Off Automatically
You can select a time period of between Off and 180 minutes after which your set automatically switches off.
1
2
3
4
5
6
7
8
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the ENTER button.
Result: The Time menu are displayed with Clock selected.
Press the or button to select the Sleep Timer.
Press the ENTER button.
Press the or button repeatedly and cycle through the preset time intervals.
Result: The preset time intervals:
Off, 30, 60, 90, 120, 150, 180 minutes.
To cancel the sleep timer function, select "Off" by pressing the or button.
Press the ENTER button.
Press the EXIT button to return to normal viewing.
You can set the sleep timer by simply pressing the "SLEEP" button on the remote control.
1
2
Press the SLEEP button on the remote control.
Result: If the sleep timer is not yet set, Off is displayed.
Otherwise, the remaining time before which the television switches to Standby mode is displayed.
Select the preset time interval for staying on by pressing the SLEEP button repeatedly.
English-29
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 30
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at the time you select.
Switch off automatically at the time you select.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the ENTER button.
Result: The Time menu are displayed with Clock selected.
Press the or button to select the On Timer.
Press the ENTER button.
Result: The On Timer menu is displayed.
Set the time, channel and volume level at which you wish the set to be switched on.
To...
Press the...
Move to Hour, Minute, am/pm,
Channel, and Volume
Set Hour, Minute, am/pm, Channel and Volume level
Move to Setup
Select On to enable above setting
Press the ENTER button.
or or or or button button button button
Press the or button to select Off Timer.
In the same way, set the time at which you wish the set to be switched off automatically.
English-30
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 31
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
"Blue Screen" mode to "Off".
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select Blue Screen.
Press the ENTER button.
Select the required option (On or Off) by pressing the or button.
Press the EXIT button to return to normal viewing.
Displaying Information
You can view the setting status of the selected source by pressing the
"INFO" button on the remote control.
The information displayed varies according to the selected source.
English-31
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 32
Teletext Feature
Most television channels provide written information services via teletext.
Information provided includes:
Television programme times.
News bulletins and weather forecasts.
Sports results.
Travel information.
This information is divided into numbered pages (see diagram).
Part
D
E
F
A
B
C
Contents
Selected page number
Broadcasting channel identity
Current page number or search indicators
Date and time
Text
Status information
FASTEXT information
Teletext information is often divided between several pages displayed in sequence, which can be accessed by:
Entering the page number.
Selecting a title in a list.
Selecting a coloured heading (FASTEXT system).
English-32
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 33
Displaying the Teletext Information
You can display Teletext information at any time on your set.
☛
For Teletext information to be displayed correctly, channel reception must be stable; otherwise:
◆ Information may be missing.
◆ Some pages may not be displayed.
1
2
3
Select the channel providing the Teletext service using the or button.
Press the TTX/MIX button to activate the teletext mode.
Result: The contents page is displayed. It can be redisplayed at any time by pressing the (index) button.
If you wish to display the actual broadcast at the same time as the teletext page, press the TTX/MIX button again.
4 Press the TV( ) button again to exit the teletext display.
English-33
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 34
Selecting a Page by Number
You can enter the page number directly by pressing the numeric buttons on the remote control.
1
2
Enter the three-digit page number given in the content by pressing the corresponding numeric buttons.
Result: The current page counter is incremented and the page is then displayed.
If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.
To freeze the display on a given page, press the (hold) button.
Press the (hold) button again to resume.
Using the various display options:
To display...
◆ Hidden text
(answers to quiz games, for example)
◆ The normal screen
◆ A secondary page by entering its 4-digit number
◆ The next page
◆ The previous page
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
◆ Normal screen
Press the...
(reveal)
(reveal) again
(subpage)
(page up)
(page down)
(size)
• Once
• Twice
• Three times
English-34
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 35
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control.
1
2
3
4
Display the teletext contents page by pressing the TTX/MIX button.
Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status line.
Result: The page is displayed with other coloured information that can be selected in the same way.
To display the previous or next page, press the corresponding coloured button.
To display the subpage, see the following steps.
◆ Press the (subpage) button.
Result: The available subpages appear.
◆ Select the required subpage.
Subpages can be scrolled by using the or button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1
2
3
4
5
Select the LIST mode using the (LIST/FLOF) button.
Result: Four 3-digit numbers are displayed in different colours.
The (LIST/FLOF) button is used to switch between the LIST and FLOF modes.
Press the coloured button corresponding to the page that will be replaced.
Enter the new page number using the numeric buttons.
Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time.
Press the (store) button until the corresponding blocks blink.
English-35
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 36
Setting Up Your PC Software
(Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1 First, click on “Control Panel” on the Windows start menu.
2 When the control panel window appears, click on “Appearance and
Themes” and a display dialog-box will appear.
3 When the control panel window appears, click on “Display” and a display dialog-box will appear.
4 Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
- refer to page 45, 47
If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
English-36
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 37
Coarse and Fine Tuning of the Image
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine tuning alone, then adjust the frequency as best as possible (coarse) and Fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
Preset to PC mode by pressing the SOURCE button on the remote contol.
1
2
3
4
5
6
7
8
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the ENTER button.
Result: The Image Lock menu is selected.
Press the or button to select Coarse or Fine.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to adjust the screen quality.
Vertical stripes may appear or the picture may become blurry.
When you are satisfied with the settings, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-37
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 38
Changing the Image Position
Preset to PC mode by pressing the SOURCE button on the remote contol.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the or button to select Position.
Press the ENTER button.
Result: You can adjust the image Position.
Press the or button to adjust the vertical position.
Press the or button to adjust the horizontal position.
Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-38
03-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 39
Initializing the Image Settings
You can replace all image settings with the factory default values.
Preset to PC mode by pressing the SOURCE button on the remote contol.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the or button to select Image Reset.
Press the ENTER button.
Result: The message “Image Reset has completed.” is displayed.
Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-39
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 40
Adjusting the PC Screen Automatically
Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal.
The values of fine, coarse and position are adjusted automatically.
Preset to PC mode by pressing the SOURCE button on the remote contol.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select Setup.
Result: The options available in the Setup group are displayed.
Press the ENTER button.
Press the or button to select PC.
Press the ENTER button.
Result: The options available in the PC menu are displayed.
Press the or button to select Auto adjustment.
Press the ENTER button.
Result: The screen quality and position are automatically adjusted, and the screen returns to the original view a few seconds later.
Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-40
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 41
Picture Mode
You can select the type of picture which best corresponds to your viewing requirements.
1
2
3
4
5
6
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Result: The Mode is selected.
Press the ENTER button.
Select the required picture effect by pressing the or button repeatedly. Press the ENTER button.
Result: The following picture effects are available:
Entertain - Internet - Text - Custom
Press the EXIT button to return to normal viewing.
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Custom.
Press the ENTER button.
Select the option (Contrast, Brightness) to be adjusted by pressing the or button.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to reach the required setting.
When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
If you make any changes to these settings, the picture standard is automatically switched to Custom.
English-41
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 42
Adjusting the Screen Background Colour
You can change the screen background colour according to your preference.
1
2
3
4
5
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Colour Tone.
Press the ENTER button.
Result: The following options are available:
Cool - Normal - Warm - Custom
When you are satisfied with your choice, press the EXIT button to return to normal viewing.
English-42
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 43
Customizing the Colour
1
2
3
4
5
6
7
Press the MENU button.
Result: The main menu is displayed.
Press the or button to select the Picture.
Result: The options available in the Picture group are displayed.
Press the ENTER button.
Press the or button to select the Colour Control.
Press the ENTER button.
Select the option (Red, Green, Blue) to be adjusted by pressing the or button.
Press the ENTER button.
Result: The horizontal bar is displayed.
Press the or button to reach the required setting.
When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
English-43
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 44
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer.
No sound or picture.
Normal picture but no sound.
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE remote control.
button has been pressed on the
No picture or black and white picture.
Sound and picture interference.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the set and move it further away.
◆ Plug your set into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Blurred or snowy picture, distorted sound.
Remote control malfunctions.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
“Check signal cable.” message is displayed.
◆ Check that the signal cable is firmly connected to the PC.
◆ Check that the PC is turned on.
In PC mode, “Mode Not Supported” message is displayed.
◆ Check the maximum resolution and the frequency of the video adapter.
◆ Compare these values with the data in the Display Modes.
(refer to page 47)
◆ Adjust the Coarse or Fine function. (refer to page 37) In PC mode, horizontal or vertical bars appear to flicker, jitter or shimmer on the image.
In PC mode, the screen is black and the power indicator light is steady amber or blinks every 0.5 or 1 seconds.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press any key on the keyboard.
English-44
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 45
Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and may appear to vibrate.
◆ Check that the display resolution and frequency from your computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
◆ If the setting is not correct, use your computer utility programme to change the display settings.
Your set supports multiscan display functions within the following frequency domain:
Horizontal frequency(kHz)
Vertical frequency(Hz)
Maximum refresh rate
(at 75Hz)
15”(LA15S51B)
30~69
50~75
1024x768
20”(LA20S51B)
28~47
50~75
800x600
In PC mode, the image is not centred on the screen.
◆ Adjust the horizontal and vertical position.
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one millionth) above is used for this product. This is not from bad quality and you can use it without uneasiness. For example, the number of
TFT LCD sub pixels: LA15S51B - 2,359,296, LA20S51B - 1,440,000
Note : The component terminal of this set only supports 480i/480p/576i/576p resolution.
Power Saver
This set has a built-in power management system called PowerSaver. This system saves energy by switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA
DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.
State
Horizontal Sync
Vertical Sync
Power Indicator
Power Consumption
Normal Operation
Active
Active
Off
15” 40W, 20” 55W
Power-Saving Function mode
(EPA/NUTEK)
Inactive
Inactive
Red, Blinking (1 sec interval)
Less than 3W
➣
This set automatically returns to normal operation when horizontal and vertical sync are restored.
This occurs when you move the computer’s mouse or press any key on the keyboard.
English-45
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 46
Technical and Environmental Specifications
Model Name
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
Frequency
Horizontal
Vertical
Display Color
Resolution
Optimum
Maximum
Input Signal
Sync.
Video Signal
Video
Color System
Video System
Component
Video Input
Audio Input
Power Supply
Input
Power Consumption
Maximum
Power Saving
Dimension (W x D x H)
TV Body
With stand
Weight
With stand
Environmental Considerations
Operationg Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input
PC Audio Input
Audio Output
Headphone Output
Frequency
Response
English-46
LA15S51B
331.6(H) x 254.9(V)mm
13.05(H) x 10.03(V)inch
304.1(H) x 228.1(V)mm
11.97(H) x 8.98(V)inch a-si TFT active matrix
0.297(H) x 0.297(V)mm
140/115
30 ~ 69kHz
50 ~ 75Hz
16.2 Million
LA20S51B
413.0(H) x 311.0(V)mm
16.25(H) x 12.24(V)inch
408.0(H) x 306.0(V)mm
16.06(H) x 12.05(V)inch a-si TFT active matrix
0.264(H) x 0.264(V)mm
160/120
28 ~ 47 kHz
50 ~ 75Hz
16.7 Million
1024 x 768@60Hz
1024 x 768@75Hz
H/V Separate, TTL, P or N
0.7 Vp-p @75 Ω
800 x 600@60Hz
800 x 600@75Hz
PAL / SECAM / NTSC4.43 / NTSC3.58
CVBS, S-VHS, RGB
480i, 480p, 576i, 576p
500mVrms
AC 100V ~240V (50/60Hz)
40W
<3W
360.2 x 64.2 x 338.6 mm
(14.18 x 2.53 x 13.33 inch)
360.2 x 192.9 x 396.5 mm
(14.18 x 7.59 x 15.61 inch)
3.6 kg (7.94 lbs)
55W
<3W
479.0 x 74.7 x 436.4 mm
(18.86 x 2.94 x 17.18 inch)
479.0 x 226.0 x 463.0 mm
(18.86 x 8.90 x 18.23 inch)
7.45 kg (16.42 lbs)
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
RCA Jack (L, R), 0.5Vrms(-9dB)
3.5
ø Stereo Jack, 0.5Vrms(-9dB)
2.5W x 2
Max.10mW Output(3,5 ø Stereo Jack 32)
RF : 80Hz ~15kHz at -3dB
A/V : 80Hz ~20kHz at -3dB
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 47
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your Videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture.
VGA
SVGA
XGA
Mode(PC)
LA15S51B
LA20S51B
LA15S51B
LA20S51B
LA15S51B
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync Polarity
(H/V)
720X400
640X480
640X480
800X600
800X600
1024X768
1024X768
31.469
31.469
37.500
46.875
37.879
48.363
60.023
70.087
59.940
75.000
75.000
60.317
60.004
75.029
28.322
25.175
31.500
49.500
40.000
65.000
78.750
- / +
- / -
- / -
+ / +
+ / +
- / -
+ / +
English-47
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 48
Retractable Stand
Note : The maximum tilt angle is 13 degrees in the backward direction.
Please do not tilt the TV outside the specified range. Using excessive force to tilt the
TV may cause permanent damage to the mechanical part of the stand.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world.
A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies.
English-48
04-BN68-00816H-00Eng.qxd 2/24/05 11:21 AM Page 49
Using the Anti-Theft Kensington Lock
Cable
Figure 2
Figure 1
<Optional>
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer.
Please refer to the manual provided with the Kensington lock for proper use.
1.
Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).
2.
Connect the Kensington lock cable.
3.
Fix the Kensington lock to a desk or a heavy stationary object.
English-49
04-BN68-00816H-00Eng.qxd 2/24/05 11:22 AM Page 50
Installing VESA compliant mounting devices
<1> <2>
Mounting pad
<1> Fold the stand pressing the button on the back of the stand.
<2> Align the mounting interface pad with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases.
English-50
04-BN68-00816H-00Eng.qxd 2/24/05 11:22 AM Page 51
Installing the Wall Mount Kit
Note : This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components
Please use provided components or parts to install the Wall Mount Kit.
Bracket Anchors : 3EA Screws : 3EA
How to assemble the Wall Mount Kit
1 Mark the location of hole on the wall using installation guide.
Make over 35mm- depth- hole on the marked location using
5.0-diameter drill.
Fix anchors on each hole on the wall.
Connect bracket to the wall with screws after fitting anchors into the bracket holes.
Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.
Installation Guide
2 You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture below.
3 When using LCD TV in stand-based form, place the product on a cushion or other soft materials. Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand.
(Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well.)
English-51
04-BN68-00816H-00Eng.qxd 2/24/05 11:22 AM Page 52
Installing the Wall Mount Kit
4 Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket.
When bracket is assembled on the wall How to hang LCD TV up on a hook When installation is completed
5 Remove Installation Guide after completing setup of monitor on the wall.
6 Push the LCD TV up and shift to the right to detach it from bracket.
When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.
How to assemble the Wall Mount Kit
(1) Angle adjustment section of general stand-besd LCD TV
(2) Angle abjustment section while converting the form
(1->3, 3->1)
(3) Angle adjustment section of wall-mounted LCD TV
Picture(1) shows the adjustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).
Excessive tilting can turn LCD TV over which might cause damage to LCD TV.
Picture(2) shows the adjustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.
Picture(3) shows the adjustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.
Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wall-mounted one or vice versa.
- Click" sound indicates section change from 1 to 2 or 3 to 2(1->2, 3->2).
English-52
04-BN68-00816H-00Eng.qxd 2/24/05 11:22 AM Page 53
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
ELECTRONICS
Advertisement