Samsung | DVD-CM350 | User manual | Samsung DVD-CM350 User manual

DVD-VCR
DVD-CM350
Instruction Manual
www.samsung.com.au
Contents
Contents (cont.)
GB
GB
◆ FOREWORD
■
■
Safety Instructions .........................................................................................
Disc Type and Characteristics.......................................................................
5
6
■
■
■
■
Front View of the DVD-VCR ..........................................................................
Rear View of the DVD-VCR...........................................................................
Infrared Remote Control ................................................................................
Display Indicators ..........................................................................................
Accessories ...................................................................................................
7
7
8
9
9
◆ CONNECTING YOUR DVD-VCR
■
■
■
■
■
■
■
■
■
■
■
Deciding How to Connect DVD-VCR.............................................................
Connecting DVD-VCR to the TV using the Coaxial Cable ............................
Connecting DVD-VCR to the TV using the RCA Cable.................................
Connecting Other Equipment to Your DVD-VCR ..........................................
Plug & Auto Set Up........................................................................................
Tuning Your Television for the DVD-VCR .....................................................
Deck Control Keys.........................................................................................
Copying from DVD to VCR ............................................................................
Inserting Batteries in the Remote Control......................................................
Setting the Date and Time.............................................................................
Menu Language.............................................................................................
■
■
■
■
■
■
■
■
■
■
■
■
■
Presetting the Stations Automatically ............................................................
Presetting the Stations Manually ...................................................................
Clearing a Preset Station...............................................................................
Changing the Preset Station Table................................................................
Setting the DVD-VCR Output Channel..........................................................
Selecting the RF OUT Sound Mode(B/G-D/K) (Newzealand Model only)......................
Selecting the Colour Mode ............................................................................
NICAM (Newzealand Model only) .................................................................
Intelligent Picture Control ..............................................................................
Auto Power off ...............................................................................................
G-CODE EXTEND.........................................................................................
Selecting the Cassette Type..........................................................................
Auto Repeat Play...........................................................................................
Displaying/Hiding On-Screen Information .....................................................
■
■
■
■
■
■
■
■
2
Selecting the Recording Speed .....................................................................
Protecting a Recorded Cassette....................................................................
Recording a Programme Immediately ...........................................................
Recording a Programme with Automatic Stop...............................................
Using the G-CODE Feature...........................................................................
Modifying G-CODE Programming .................................................................
Using the Timer Programming Feature .........................................................
Checking a Preset Recording........................................................................
Cancelling a Preset Recording ......................................................................
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
28
29
29
30
31
32
33
34
34
Playing a Cassette.........................................................................................
Adjusting Picture Alignment Automatically ....................................................
Adjusting Picture Alignment Manually ...........................................................
Selecting the Audio Output Mode..................................................................
Playing a Cassette in Slow Motion ................................................................
Playing a Sequence Frame by Frame ...........................................................
Playing a Sequence at Variable Speeds .......................................................
Picture Search, Fast Forward/Rewind...........................................................
Searching for a Specific Sequence ...............................................................
Using the Tape Counter ................................................................................
Connecting an RCA Audio/Video Input Cable ...............................................
Using the Assemble Edit Function.................................................................
Recording from Another VCR or Camcorder.................................................
Audio Dubbing a Pre-recorded Cassette.......................................................
Using the TV Buttons on the Remote Control ...............................................
SQPB (Super VHS Quasi PlayBack) ............................................................
35
35
35
36
36
37
37
38
38
39
40
41
41
42
43
44
◆ DVD FUNCTIONS
■
19
20
21
22
23
23
24
24
25
26
26
27
27
28
◆ RECORDING TELEVISION BROADCASTS
■
■
■
10
11
11
12
13
14
15
16
17
17
18
◆ SETTING UP YOUR DVD-VCR
■
■
■
◆ DVD-VCR OVERVIEWS
■
◆ PLAYING BACK
■
■
■
Playing a Disc................................................................................................
Using the Search & Skip Functions ...............................................................
Using the DVD Setup ....................................................................................
Using the Disc Menu Language ....................................................................
Setting Up the Audio Language Features .....................................................
Using the Subtitle Language .........................................................................
Setting Up the Parental Control.....................................................................
Setting Up the Audio Options ........................................................................
Setting Up the Display Options......................................................................
S-Video/Component Video Connections (for DVD)...............................................
Special Playback Features ............................................................................
Using the Display Function (DVD/VCD/CD) ..................................................
Repeat Play ...................................................................................................
Programmed Playback (CD)..........................................................................
Random Playback (CD).................................................................................
SCREEN FIT Play .........................................................................................
Selecting the Audio Language (Using the Audio button)...............................
Selecting the Subtitle Language (Using the Subtitle button) .........................
Changing the Camera Angle .........................................................................
Using the Book Mark Function (DVD/VCD)...................................................
Recalling a Marked Scene.............................................................................
Clearing a Mark .............................................................................................
Using the Zoom (DVD/VCD)..........................................................................
MP3 Play .......................................................................................................
MP3 Play (CD-R MP3 disc requirements) .....................................................
45
46
47
48
49
49
50
51
52
53
54
55
56
57
57
58
59
59
60
61
61
61
62
63
64
3
Contents (cont.)
Safety Instructions
GB
GB
The following illustrations represent precautions.
◆ Appendix A - Advanced Connections
■
■
■
■
■
■
■
■
■
Connecting the FM and AM antennas ...........................................................
Connecting the Speakers ..............................................................................
LINE3 AUDIO Setting ....................................................................................
Speaker Volume Control ...............................................................................
Speaker setup ...............................................................................................
Dolby Pro Logic II decoder ............................................................................
SOUND mode/effect function ........................................................................
Listening to radio broadcasts.........................................................................
Presetting stations .........................................................................................
65
66
67
67
68
70
71
72
72
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
◆ SOLVING PROBLEMS
■
■
■
Technical Specifications ..............................................................................
Problems and Solutions (VCR)......................................................................
Troubleshooting Guide (DVD) .......................................................................
73
75
76
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corpration and other rights owners. Use of this copyright protection
technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Symbols
1
1
☛
➢
Press/push
Hold down
Important
Note
1 = Step number
4
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
5
Disc Type and Characteristics
Front View of the DVD-VCR
GB
GB
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types
(Logos)
Recording Disc Size
Types
DVD
12 Cm
Audio
+
Video
8 Cm
VIDEO-CD
12 Cm
Audio
+
Video
AUDIO-CD
Max.
Playing
Time
Characteristics
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
20 min.
12 Cm
74 min.
8 Cm
20 min.
Audio
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
• Playback
Region
Number
• PAL colour
system in U.K,
France, Germany,
Austrailia etc.
OPEN/CLOSE
BUTTON
PLAY/PAUSE
BUTTON
VIDEO CASSETTE
COMPARTMENT
COPY
BUTTON
SOUND
EFFECT
REW/SKIP BACK
BUTTON
FM/AM
EJECT BUTTON
INPUT SELECT
DVD/VCR SELECT
BUTTON
VOLUME
PROGRAMME
SELECTION
BUTTONS
Rear View of the DVD-VCR
RADIO FM
ANTENNA INPUT
AERIAL IN
CONNECTOR
Disc Markings
PAL
RECORD
BUTTON
F.F/SKIP NEXT
BUTTON
STOP
BUTTON
HEADPHON
JACK
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
~
DVD DECK
74 min.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
8 Cm
STANDBY/ON
BUTTON
COOLING FAN
SPEAKER OUT
LINE IN 1, 2, 3
NTSC
STEREO
• Stereo
• NTSC broadcast • Dolby
Digital disc
disc
system in USA,
Canada, japan,
South Korea, etc.
DIGITAL
SOUND
• Digital
Audio disc
• DTS disc
• ”DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
• Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
OUT TO TV
RADIO AM
ANTENNA INPUT CONNECTOR
LINE OUT TO TV
OPTICAL INPUT
COMPONENT
VIDEO OUT
S-VIDEO OUT
7
Display Indicators
Infrared Remote Control
GB
GB
1
1
21
2
22
23
3
24
4
25
5
6
26
27
28
7
29
8
9
30
10
11
12
31
32
33
34
13
14
15
16
17
18
19
20
35
36
37
38
39
40
41
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
STANDBY/ON
OPEN/CLOSE, EJECT
SPEAKER
TEST
MODE, REPEAT
ANGLE
TV VOLUME
TV SELECT
DVD, VCR, FM/AM, INPUT
SELECT
REWIND, SKIP BACK
STOP
DISPLAY
SETUP
UP
LEFT
ENTER
RECORD
MARK, INDEX
AUDIO
TITLE, SPEED
TV STANDBY/ON
MUTE
0-9
SOUND MODE
SOUND EFFECT
STEP
ZOOM, ATR
PROG/TRK œ/❷
AMP VOLUME
TV INPUT
FAST-FORWARD, SKIP
NEXT
PLAY/PAUSE
CLEAR
DISC MENU
RIGHT
DOWN
RETURN, A.DUB
SUBTITLE, TIMER
SCREEN FIT, SVHS
TV/VCR
JOG/SHUTTLE
12
2
4
5
6
7 8 9 19 10 11
13 14 15 16 17
20 21
1 The DVD Deck is selected
2 A DVD, CD, VCD or SVCD is loaded
3 A disc with LPCM (Linear Pulse Code Modulation)
audio is loaded
4 A DVD with a Dolby Digital is loaded
5 A DVD with a DTS soundtrack is loaded
6 The time, counter position, time remaining or
current deck status is displayed
7 The current TV show or video is broadcast in Stereo
8 The Hi-Fi track of a VHS tape is playing
9 A Timer Recording is programmed or in progress.
If blinking there is an error.
10 Tape Speed
11 The VCR Deck is selected
18
12 The status of the DVD deck is graphically displayed
13 The DVD has multiple angles.
14 MP3
15 A MPEG Audio Disc is loaded.
16 The number to the right of the “T” symbol is the
current title number
17 The number to the right of the “C” symbol is the
current chapter number
18 VHS tape is inserted and the VCR Deck is active
19 NICAM Indicator
20 VPS or PDC Indicator
21 COPY mode Indicator
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
BATTERIES
8
3
AUDIO & VIDEO CABLE
OWNER’S INSTRUCTIONS
AM ANTENNA CABLE
COAXIAL CABLE
FM ANTENNA CABLE
9
Deciding How to Connect DVD-VCR
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
GB
◆
◆
◆
◆
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
☛
Your DVD-VCR is equipped with the following connectors.
Connector
Location
Type
LINE
Rear
Audio/Video RCA
Direction
In/Out
◆ Television
◆ Other VCR
COMPONENT Rear
output
RCA
Out
◆ COMPONENT out (DVD only)
S-VIDEO
output
Rear
S-JACK
Out
◆ S-Video out (DVD only)
OUT TO TV
Rear
75 Ω
Out
◆ Television
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
2
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75Ω coaxial socket marked
rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the
DVD-VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
Recommended Use
GB
on the
TV
socket on your
4
3
Connecting DVD-VCR to the TV using the RCA Cable
Aerial
coaxial
TV
IN FROM ANT. Rear
75 Ω
coaxial
In
◆ Aerial
◆ Cable television network
◆ Satellite receiver
☛
3
2
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
RF coaxial cable
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛
10
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆ Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
11
Connecting Other Equipment to Your DVD-VCR
Plug & Auto Set Up
GB
GB
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
Camcorder
VCR
REAR OF THE DVD-VCR
Sound system
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
The LANGUAGE SET menu is displayed.
3
Select the required language by pressing the œ or ❷ buttons.
4
Press ENTER to store the language selected.
Result:
A message appears.
5
Press ENTER to start the auto scanning.
◆
The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
6
Check the data and time. (see page 17)
7
On completion, press RETURN to exit the menu.
➢
◆
TV
2
Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no tape
inserted.
AUTO SET UP
PLEASE WAIT
60%
I■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ -------I
RETURN
CLOCK SET
12:00
1/JAN/2003
WED
➛❿œ❷
RETURN
12
13
Tuning Your Television for the DVD-VCR
Deck Control Keys
GB
GB
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
➢
2
1
4
14
To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
mode (AV).
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1
STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2
DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
Switch on the television.
2
Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3
Select a programme position on the television to be reserved for
use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press ❿II button.
5
Start a scan on your television or set the television to UHF
channel 38 (Newzealand:UHF 36 CH).
6
Fine tune the television until the pictures and sound are obtained
clearly.
7
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on page
75).
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result:
That programme is now reserved for use with your
DVD-VCR.
3
VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
4
INPUT Button
Press the INPUT button repeatedly to cycle through all of your
input sources, including the Tuner (PR##), Line 1, Line 2 and Line
3 (rear AV input).
1
1
2
3
15
4
Copying from DVD to VCR
GB
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
1
2
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into Record
mode.
◆ If the DVD disc menu appears, you may need to press the PLAY
button manually to begin copying.
2
4
3
Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛
The copy is only active PAL Disc system.
Inserting Batteries in the Remote Control
GB
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢
1
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
MAIN MENU
You must set the date and time when:
◆ You purchase the DVD-VCR
☛
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
4
CLOCK SET
RETURN
4
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
CLOCK SET option.
3
Press the ENTER button to select this option.
Result:
The CLOCK SET menu is displayed.
4
Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result:
The option selected flashes.
5
Press the œ or ❷ buttons to increase or decrease the value.
Result:
The day of the week is displayed automatically.
➢
6
16
œ, ❷
œ❷➛❿
ENTER
or ➛, ❿ buttons to select the
CLOCK SET
12:00
1/JAN/2003
WED
➛❿œ❷
RETURN
You can hold the œ or ❷ buttons down to scroll more
quickly through the values.
On completion, press RETURN twice to exit the menu.
17
Menu Language
GB
1
Open “MAIN MENU”
With the DVD in stop mode, press the SETUP button.
2
Set “Language”
Using the œ, ❷ and ➛, ❿ buttons, move the selection arrow to
Language set then press ENTER button.
1
3
Set menu Language
Move the selection bar to your desired Language, then press
ENTER button.
MAIN MENU
LANGUAGE SET
RETURN
œ❷➛❿
ENTER
LANGUAGE SET
❿ English
Français
Deutsch
Español
Italiano
Nederlands
RETURN
œ❷
18
ENTER
VCR
Presetting the Stations Automatically
GB
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
MAIN MENU
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 20)
INSTALLATION
RETURN
œ❷➛❿
ENTER
Australia Model
You can store up to 80 stations.
INSTALLATION
1
Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the AUTO SET
UP option is selected.
And then press the ENTER button to select this option.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
:CH38
œ❷ENTER
RETURN
Newzealand Model
5
Press ENTER to start the auto scanning.
Result:
◆ The PLEASE WAIT indication flashes on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second station
and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
6
➢
The number of stations automatically stored by the DVDVCR depends on the number of stations that it has found.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
:G
:CH36
œ❷ENTER
RETURN
YOUR DATA WILL BE LOST
PRESS ENTER TO CONTINUE
RETURN TO EXIT
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
RETURN
19
VCR
Presetting the Stations Manually
GB
☛
MAIN MENU
INSTALLATION
œ❷➛❿
RETURN
ENTER
1
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
:CH38
œ❷ENTER
RETURN
Newzealand Model
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
5
Press the ENTER button to select a MANUAL SET UP option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the œ or ❷ buttons to select a programme number as
required.
œ
❷
Press the CLEAR button.
10
To change the programme’s name, press the ❿button.
The first letter of the name flashes.
Result:
8
Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
11
To...
9
On completion, press the RETURN button three times to exit the
menu.
Select a character
in the name
Press the œ or ❷ button until the
required character is displayed
(letters, numbers or “-” character).
Move to the next or
previous character
Press the ❿ or ➛ buttons
respectively.
If you...
Then...
Wish to store the
station displayed
◆
Do not wish to
the station
displayed
MANUAL TUNING
20
Press the œ or ❷buttons until the MFT
is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press ENTER to store the station
◆
Press the œ or ❷ buttons until the store
CH is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 12
◆
13
Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14
On completion, press the RETURN button three times to exit the
menu.
☛
INSTALLATION
œ❷➛❿
RETURN
ENTER
Australia Model
Press the corresponding œ or ❷ buttons, until the MANUAL SET
7
Then...
MAIN MENU
INSTALLATION
UP option is selected.
Press the œ or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
DELETE:CLEAR
RETURN
4
9
◆
MEMORY:ENTER
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
Press the corresponding œ or ❷ buttons, until the required preset
TV station is selected. (PR)
❿ SWAPPING:ENTER
œ❷➛ ❿
3
6
:G
:CH36
:
: --: : ----
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
Press the ENTER button to select this option.
Result:
The TV STATION TABLE menu is displayed.
◆
PR
CH
MFT
NAME
Press the SETUP button on the remote control.
2
5
NAME
RETURN
1
Press the ➛ or ❿ buttons to start scanning.
Result:
The frequency band is scanned and the first station
found is displayed.
12
CH
◆ At the wrong programme position
you can cancel it.
8
TV STATION TABLE
PR
1
2
3
4
5
◆ That you do not require
Press the ❿button to preset the station.
Result:
The MANUAL TUNING menu is displayed.
œ❷ENTER
RETURN
If you have stored a TV station:
7
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
GB
You do not need to preset the stations manually if you
have already set them automatically.
Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
Australia Model
VCR
Clearing a Preset Station
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
:CH38
œ❷ENTER
RETURN
Newzealand Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
:G
:CH36
œ❷ENTER
RETURN
TV STATION TABLE
PR
1
2
3
4
5
œ
❷
CH
003
NAME
❿ SWAPPING:ENTER
RETURN
DELETE:CLEAR
You do not need to preset the stations manually if you
have already set them automatically.
21
VCR
Changing the Preset Station Table
VCR
Setting the DVD-VCR Output Channel
GB
GB
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
MAIN MENU
1
Press the SETUP button on the remote control.
2
Press the corresponding
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
2
4
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
3
5
Press the ENTER button to select this option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the corresponding œ or ❷ buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
INSTALLATION
œ❷➛❿
RETURN
ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
:CH38
œ❷ENTER
RETURN
œ❷ENTER
RETURN
or ➛, ❿ buttons to select the
To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
8
Press the œ or ❷ buttons to select required position and the press
ENTER again to swap the position.
9
On completion, press the RETURN button three times to exit the
menu.
INSTALLATION
:G
:CH36
œ,❷
7
Newzealand Model
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
Press the corresponding
INSTALLATION option.
œ,❷
or ➛, ❿ buttons to select the
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
Press the
selected.
5
Select the required output channel (CH28~CH69) by pressing the
➛ or ❿ buttons (Newzealand:CH21~ CH69).
6
On completion, press RETURN twice to exit the menu.
Then tune your television again (see page 14).
œ
:CH38
œ❷ENTER
RETURN
Newzealand Model
or ❷ buttons, until the VCR OUTPUT CH option is
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
:G
:CH36
œ❷ENTER
RETURN
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
VCR
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
MAIN MENU
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
TV STATION TABLE
PR
1
2
3
4
5
œ
❷
CH
003
NAME
❿ SWAPPING:ENTER
RETURN
œ
❷
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
Press the œ or ❷ buttons, until the TV SYSTEM option is
selected.
DELETE:CLEAR
TV STATION TABLE
PR
1
2
3
4
5
3
CH
5
Press the ➛ or ❿ button to select G or K.
6
On completion, press RETURN to exit the menu.
NAME
INSTALLATION
RETURN
œ❷➛❿
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
:G
:CH36
003
œ❷ENTER
RETURN
❿ SWAPPING:ENTER
RETURN
DELETE:CLEAR
22
23
VCR
Selecting the Colour Mode
GB
Before recording or playing back a cassette, you can select the
required system standard.
Australia Model
➢
◆
USER SET
COLOUR SYSTEM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
◆
:AUTO
:ON
:OFF
:OFF
:RCA
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVDVCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the SETUP button on the remote control.
The MAIN MENU is displayed.
Result:
2
Press the corresponding œ, ❷or ➛, ❿ buttons to select the
USER SET option.
3
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
œ❷➛❿
RETURN
Newzealand Model
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
4
Press the corresponding œ or ❷ buttons, until the IPC option is
selected.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
5
Press the ❿button to select the IPC (intelligent picture control)
option.
3
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the COLOUR
SYSTEM option is selected.
6
To adjust the sharpness manually, press the ❷ button to turn the
IPC mode OFF.
5
Press the ❿ button to select AUTO ➝ PAL ➝ MESECAM ➝B/W.
7
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
➢
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W
Black and White
œ❷➛❿
RETURN
6
VCR
Intelligent Picture Control
➢
8
On completion, press RETURN twice to exit the menu.
MAIN MENU
USER SET
RETURN
œ❷➛❿
Australia Model
When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the RETURN button again.
ENTER
USER SET
COLOUR SYSTEM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
:AUTO
:ON
:OFF
:OFF
:RCA
œ❷➛❿
RETURN
Newzealand Model
USER SET
VCR
NICAM (Newzealand Model only)
MAIN MENU
USER SET
RETURN
œ❷➛❿
ENTER
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 36.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
3
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
4
Press the corresponding œ or
is selected.
5
To...
Press ➛ or ❿, until...
Mono mode
OFF is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode
ON is displayed.
œ❷➛❿
RETURN
❷
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
œ❷➛❿
RETURN
buttons, until the NICAM option
ON: Normally set at this position.
6
24
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
On completion, press RETURN twice to exit the menu.
25
VCR
Auto Power Off
VCR
Selecting the Cassette Type
GB
GB
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
Australia Model
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
VCR FUNCTION SETUP option.
3
Press the ENTER button to select this option.
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
4
Press the corresponding
SELECT option is selected.
4
Press the corresponding œ or ❷ buttons, until the AUTO POWER
OFF option is selected.
5
Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
5
Press the ❿ button, until you select the time of Auto Power off
interval.
USER SET
COLOUR SYSTEM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
:AUTO
:ON
:OFF
:OFF
:RCA
œ❷➛❿
RETURN
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
3
Newzealand Model
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
OFF
2HOUR
E180
E300
VCR FUNCTION SETUP
œ❷➛❿
RETURN
ENTER
or ❷ buttons, until the TAPE
E240
E260
VCR FUNCTION SETUP
Tape Select
Repeat Play
OSD
➛❿
E180
Off
On
3HOUR
6
6
œ
MAIN MENU
Press RETURN twice to exit the menu.
RETURN
On completion, press RETURN twice to exit the menu.
œ❷
œ❷➛❿
RETURN
VCR
Australia Model
VCR
Auto Repeat Play
G-CODE EXTEND
To prevent delays or over-runs the DVD-VCR has a function called
G-CODE EXTEND allowing you to extend the recording time by up
to 60 minutes.
You can set repeat play to repeat the tape continuously from
beginning to end.
MAIN MENU
USER SET
COLOUR SYSTEM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
:AUTO
:ON
:OFF
:OFF
:RCA
OFF
10
1
Press the SETUP button on the remote control.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
VCR FUNCTION SETUP option.
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
3
Press the corresponding œ or ❷ buttons, until the
G-CODE EXTEND option is selected.
Press the ENTER button to select this option.
Result:
The VCR FUNCTION SETUP menu is displayed.
4
5
Press ➛ or ❿ buttons to set the G-CODE EXTEND time by
increments of 10 minutes.
Press the corresponding
PLAY option is selected.
5
To...
Press ➛ or ❿, until...
6
To turn off, press ➛ or ❿ buttons repeatedly until OFF shows.
Repeat play
ON is displayed.
Do not wish to repeat play
OFF is displayed.
60
RETURN
3
➛❿œ❷
4
Newzealand Model
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
RETURN
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
➛❿œ❷
26
œ❷➛❿
ENTER
VCR FUNCTION SETUP
OFF
10
60
VCR FUNCTION SETUP
RETURN
6
œ
or
❷
buttons, until the REPEAT
Tape Select
Repeat Play
OSD
➛❿
RETURN
E180
Off
On
œ❷
On completion, press RETURN twice to exit the menu.
27
VCR
Displaying/Hiding On-Screen Information
VCR
Protecting a Recorded Cassette
GB
GB
MAIN MENU
VCR FUNCTION SETUP
œ❷➛❿
RETURN
➛❿
RETURN
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
VCR FUNCTION SETUP option.
3
Press the ENTER button to select this option.
Result:
The VCR FUNCTION SETUP menu is displayed.
4
Press the corresponding
selected.
5
To...
Press ➛ or ❿, until...
Display on-screen information
ON is displayed.
Hide on-screen information
OFF is displayed.
1
Switch on the television.
On completion, press RETURN twice to exit the menu.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
ENTER
VCR FUNCTION SETUP
Tape Select
Repeat Play
OSD
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and
Timer functions, which cannot be hidden).
E180
Off
On
œ
Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
3
VCR
Selecting the Recording Speed
4
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or
4 hours and 20 mins.
E-300
300 mins. or 5 hours
You can record a cassette at two different speeds:
◆ SP (Standard Play)
Insert the cassette on which the programme is to be recorded, with
the window visible and the safety tab intact or the opening covered
with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4
4
6
Select:
◆
The station to be recorded using the PROG/TRK (œ or ❷)
buttons
or
5
◆
The LINE source using the INPUT button for a satellite tuner
or external video source
Result:
The station number is displayed and the programme
can be seen on the television.
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SP is displayed.
LP is displayed.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6
Hold REC ( ● ) down for a while to start recording.
The record indicator appears on the television and DVDResult:
VCR display. An index is recorded on the tape (see page
38).
7
To stop recording, press ■ once.
➢
28
VCR
Recording a Programme Immediately
or ❷ buttons, until the OSD option is
œ❷
6
1
7
◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
29
VCR
Recording a Programme with Automatic Stop
VCR
Using the G-CODE Feature
GB
GB
This function enables you to record up to nine hours (LP) of
programmes.
Before presetting your DVD-VCR:
◆ Switch on both the television and your DVD-VCR
◆ Check that the date and time are correct
Your DVD-VCR stops automatically after the requested length of
time.
3
4
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4
4
Select:
◆
The station to be recorded using the PROG/TRK (œ or ❷)
buttons
or
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
The TIMER METHOD is displayed.
Result:
2
Press the corresponding œ or ❷ buttons, until the G-CODE option
is selected.
3
Press the ❿button to select G-CODE.
A message is displayed to allow you to enter the
Result:
G-CODE code.
☛
4
The LINE source using the INPUT button for a satellite tuner
or external video source
The channel number is displayed and the programme
Result:
can be seen on the television.
6
5
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6
Hold the REC button ( ● ) down for a while to start recording.
The record indicator appears on the television screen
Result:
and DVD-VCR display. An index is recorded on the
tape (see page 38).
7
LENGTH 2:30
SET LENGTH :
PRESS REC ●
8
Press the REC button ( ● ) several times to increase the recording
time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours (LP)
The length is displayed on the television displays. The
Result:
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
If you wish to cancel the recording before the end, press
STANDBY/ON.
☛
If the end of the tape is reached while recording:
◆ The recording stops
Press the numeric buttons to enter the code opposite the pro
gramme that you wish to record in your television magazine.
➢
◆
5
If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 33 if you wish to
cancel a preset recording.
When using the G-CODE function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the œ or ❷ buttons. Refer to the following page if:
◆ The programme number or times flash
◆ You wish to modify the programme
6
If the programme and times are correct, press the RETURN button.
7
Press the STANDBY/ON button to activate the timer.
8
Refer to page 34 if you wish to:
◆ Check that your VCR has been programmed correctly
◆ Cancel a preset recording
☛
TIMER METHOD
STANDARD
G-CODE
RETURN
If you wish to correct the G-CODE code that you are
entering:
◆ Press the ➛ button until the digit to be corrected is
cleared
◆ Enter the correct digit
Press the ENTER button.
The information concerning the programme is displayed.
Result:
☛
1
The numbers next to each TV programme listing are
G-CODE code numbers, which allow you to programme
your videorecorder instantly with the remote control. Tap
in the G-CODE code for the programme you wish to
record.
œ
❷
G-CODE
CODE ---------
CORRECT:➛
ENTER
CODE:0-9
RETURN
1/JAN TUE 12:09
DAY START→STOP
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:---œ
❷
SET:❿
RETURN
DELETE:CLEAR
PR
-------
7
™ G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is
manufactured under licence from Gemstar Development Corporation.
30
ENTER
31
VCR
VCR
Using the Timer Programming Feature
Modifying G-CODE Programming
GB
GB
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press SETUP a second time to confirm.
If you wish to...
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
Then...
Select an input source other
◆ Press the ➛ or ❿ buttons, until the PR selection flashes.
than the tuner (LINE IN 1, LINE IN 2 or LINE IN 3) ◆ Press the INPUT button one or more times to change the
input source selection.
The programme number is replaced by:
Result:
1
Insert the cassette and press TIMER on the remote control.
The timer method is displayed.
Result:
2
Press the ENTER button to select STANDARD option.
The TIMER PROGRAMMING menu is displayed.
Result:
using the INPUT button for a satellite tuner or
external video source
3
Press ❿to select the input source.
The input source must be selected before changing any
other value.
4
Select the required station by pressing the œ, ❷ buttons.
5
Press ❿ to select the recording day.
6
Select the required day by pressing the œ or ❷ buttons.
7
Press ❿ to select the recording start time.
◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
8
Select the required hour value by pressing the œ or ❷ buttons.
◆ Press the œ or ❷ buttons, until the W- (Week) value is
9
Press ❿ to select the minutes.
10
Select the required minute value by pressing the œ or ❷ buttons.
11
12
Press ❿ to select the recording stop time.
13
Press ❿ to select the recording speed.
14
Press the œ or ❷ buttons to select the SP (Standard Play), LP
(Long Play), AUTO (Auto Tape Speed Select) recording speeds.
15
When you have finished, press the RETURN button.
16
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
• The LINE IN 1, LINE IN 2 or LINE IN 3 source
➢
Record a programme every day
(Monday to Sunday) at the same time
◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
◆ Press the œ or ❷ buttons, until the DLY (Daily) value is
displayed.
Record a programme every week
on the same day and at the same time
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time
◆ Press the ➛ or ❿ buttons, until the STOP selection flashes.
◆ Press the œ or ❷ buttons to increase or decrease the stop
time.
Select the recording speed
◆ Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
◆ Press the œ or ❷ buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select) : see page 28
• SP (Standard Play)
• LP (Long Play)
Select the required recording stop time by pressing the œ or ❷
buttons, following the same procedure as when selecting the
recording start time.
➢
32
Before presetting a recording, check that the date and
time are correct.
TIMER METHOD
STANDARD
G-CODE
RETURN
œ
❷
ENTER
1/JAN TUE 12:09
DAY START→STOP
SA 9 12:00→12:50SP
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:---œ
❷ ➛❿
SET:❿
RETURN
DELETE:CLEAR
PR
1
------
16
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
33
VCR
Checking a Preset Recording
VCR
Playing a Cassette
GB
GB
You can check your preset recordings:
◆ When you have finished presetting the DVD-VCR
◆ If you have forgotten which programmes will be
recorded
PR
1
-----œ
❷
1/JAN TUE 12:09
DAY START→STOP
SA 9 12:00→12:50SP
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:----
1
Press TIMER on the remote control.
Result:
The timer method is displayed.
2
Press the ENTER button to select STANDARD option.
The TIMER PROGRAMMING menu is displayed.
Result:
3
Press the œ or ❷ buttons to select the required programme.
4
Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
➛❿
RETURN
DELETE:CLEAR
5
This function allows you to play back any pre-recorded cassette.
1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ll.
Otherwise, the cassette is played automatically.
2
3
➢
3
On completion, press RETURN twice.
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
To...
Then press...
Stop the playback
■ (STOP).
Eject the cassette
3
(EJECT).
VCR
Adjusting Picture Alignment Automatically
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
VCR
Cancelling a Preset Programme
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the ATR button.
You can cancel any programmes that are:
Result:
◆ Incorrect
PR
1
-----œ
❷
1/JAN TUE 12:09
DAY START→STOP
SA 9 12:00→12:50SP
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:----
◆ No longer required
1
Press TIMER on the remote control.
Result:
The timer method is displayed.
2
Press the ENTER button to select STANDARD option.
The TIMER PROGRAMMING menu is displayed.
Result:
3
Select the programme to be cancelled by pressing the œ or ❷
buttons.
4
Press the CLEAR button to cancel the selected programme.
All the recording information is deleted and the broadResult:
cast will not be recorded.
5
On completion, press RETURN twice.
➛❿
RETURN
DELETE:CLEAR
◆ The tracking bar appears.
◆ The picture is automatically adjusted.
◆ The tracking bar disappears when digital auto tracking has
been completed.
VCR
Adjusting Picture Alignment Manually
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK (œ or ❷) buttons until the picture is
clear and stable.
4
Result:
◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
34
35
VCR
Selecting the Audio Output Mode
VCR
Playing a Sequence Frame by Frame
GB
GB
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option
L
R
LR
MIX
You can:
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
➢
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO
Used to listen to the sound on the normal mono channel.
LR
Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢
MONO
1
Press:
◆
❿ll to start playing the cassette
❿ll to still the tape at a given frame
◆
Turn the JOG Dial to advance frame by frame
◆
2
➢
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
VCR
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
➢
1
1
1
Press:
◆
◆
◆
◆
increase the speed respectively
To return to the normal speed, press the ❿ll button twice.
2
2
When you have been using the Frame-by-Frame function
for more than about five minutes, the DVD-VCR will
automatically play to protect the cassette and video
heads.
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
PROG/TRK buttons to minimize this effect.
VCR
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢
❿ll to start playing the cassette
❿ll button one more time to make STILL mode.
❿❿ to start SLOW mode.
❿❿ or ➛➛ button as many times as required to decrease or
◆
2
No sound is heard when playing back a cassette in slow
motion.
1
To return to normal playback, press ❿ll.
☛
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
No sound is heard when playing back frame by frame.
1
No sound is heard when playing a sequence at variable
speeds.
1
1
Press:
◆
◆
◆
❿ll during playback
Turn the SHUTTLE dial to left to play the cassette backwards.
Turn the SHUTTLE dial to right to play the cassette forwards.
When playing back in slow motion, picture interference may occur.
Press the PROG/TRK (œ or ❷) buttons to minimize this effect.
☛
When you have been using the Slow Motion function for
more than about five minutes, the DVD-VCR will
automatically play to protect the:
◆ Cassette
◆ Video heads
36
37
VCR
Picture Search, Fast Forward/Rewind
Picture Search enables you to Fast Forward or Rewind and look for
a particular part of a tape.
GB
VCR
1
Press PLAY, the VCR will enter normal play mode. While in play,
press and release the ❿❿ (or ➛➛ ) button. The VCR will search at 5
times the normal playback speed.
2
To return to normal playback mode, press the ❿II button.
3
If you press and HOLD down the ❿❿ (or ➛➛ ) button the VCR will
search at 9 times the normal speed. Releasing the ❿❿ button will
return the VCR to search at 5 times the normal speed. To return to
normal playback mode, press the ❿II button.
4
Whilst in Picture Search mode, if you press the ❿❿ button again,
the VCR will enter normal Fast Forward mode.
5
Likewise, whilst in Picture Search ➛➛ mode, if you press the ➛➛
button again, the VCR will enter normal Rewind mode.
6
If, when Rewinding (➛➛ ) or Fast Forwarding (❿❿), you press the ➛➛
(or ❿❿) button, the VCR will enter the Picture Search mode.
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➞
etc.
➢
2
Prev
Seq. being
Seq.
played
1
Next
Seq.
1
etc.
2
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INTRO SCAN
1
2
3
To search for a specific index, press INDEX.
Press the ➛➛ or ❿❿ buttons depending on the direction
where your desired programme is located.
When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index mark.
4
If you want to watch the tape from a particular Index, simply press ❿II.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
38
1
2
Press the INDEX to start the Index search.
3
These Index searches can be made forwards: (press ❿❿) or
backwards: (press ➛➛ ).
4
To cancel an Index search simply press the ❿II or ■ button.
Press the ➛➛ or ❿❿ buttons twice more. This will take
you directly to the start of the desired programme is located.
VCR
Using the Tape Counter
GB
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
◆ Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆ Press DISPLAY twice to display the counter
◆ Press CLEAR when you want to set the tape counter to zero
3
When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-forward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿.
➢
0:00:00
2
2
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 28).
Press DISPLAY:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
39
VCR
Connecting an RCA Audio/Video Input Cable
GB
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples: ◆ You wish to copy a video cassette with the help of a
second VCR (see page 41).
◆ You wish to play back and/or copy pictures taken
with a camcorder (see page 41).
1
☛
3
3
◆ Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
socket on the Rear of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable into the AUDIO sockets
on the Rear of the DVD-VCR.
➢
4
VCR
Using the Assemble Edit Function
GB
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your DVD-VCR.
2
Press the ❿ll button to start playback.
3
When you reach the position from which you wish to start the new
recording, press the ❿ll button.
4
Turn the JOG Dial again as often as necessary to advance frame
by frame, until the exact recording position is located.
5
While the DVD-VCR is in still mode, hold the REC button ( ● )
down for a while to activate the Assemble Edit function.
Result:
Record symbol flashes in the display.
6
Select the source from which you wish to record by pressing:
◆ The PROG/TRK (œ or ❷) buttons for television channels
◆ The INPUT button for the LINE input sources
7
Press the ❿ll button to start recording.
8
When you have finished recording, press ■ .
Take care to respect the colour coding of the left and right
channels.
2
5
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
VCR
Recording from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the rear
of your DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input
5
Start playing back the cassette to be copied.
6
Hold REC (●) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press ■ on both VCR and
DVD-VCR.
➢
40
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
2
7
6
If you wish to view the cassette being copied:
◆ Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
41
VCR
Audio Dubbing a Pre-recorded Cassette
GB
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
◆ A CD, DVD
◆ A microphone connected to a sound system
◆ A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
2
2
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the Rear of your DVD-VCR.
3
Insert the pre-recorded cassette on which the audio track is to be
replaced, and press the ❿ll to start playback.
4
Search for the Audio Dubbing (ending) point using the ❿❿, and set
the counter to 0:00:00 by pressing DISPLAY and CLEAR.
5
Search back slightly beyond the Audio Dub start point using the ➛➛
button.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
1
Brand
Codes
Brand
Codes
SAMSUNG
AKAI
GRUNDIG
LOEWE
PANASONIC
01 to 06
09, 23
09, 17, 21
02
08, 23 to 27
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
Result:
➢
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
☛
Press A.DUB.
Result:
Your DVD-VCR is now in the Audio dubbing Still
mode.
You can then control the television using the following buttons.
8
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
TV STANDBY/ON ➀ Used to switch the television on and off.
TV or VCR
➁
Used to switch between the TV and VCR modes.
When you are ready:
◆
Start playback on the sound system
◆
Press the REC on the remote control.
The soundtrack is replaced on the pre-recorded cassette.
Result:
TV INPUT
➂
Used to select an external source.
10
➢
The audio dubbing will finish when the counter reaches 0:00:00.
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
Button
2
4
3
4
Function
TV VOL + or –
PROG/TRK
(œ or ❷)
MUTE
The new sound will be recorded on the normal sound track of the
tape, and the original sound will remain on the Hi-Fi sound track.
To hear the new sound and original sound mixed together, press
the Audio button on the remote control until the MIX option is
displayed (see page 36).
2
If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
7
A.DUB
-0:05:23
42
To determine whether your television is compatible, follow the instructions
below.
Press the ❿ll button.
Press the ❿ll button one more time to make STILL mode.
9
GB
Your DVD-VCR remote control will work with Samsung televisions
and compatible brands.
6
7
VCR
Using the TV Buttons on the Remote Control
➅
➢
➄
➃
Used to adjust the volume of the television.
5
5
Used to select the required programme.
Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
6
43
VCR
SQPB (Super VHS Quasi Playback)
DVD
Playing a Disc
GB
GB
This function is for playback of Super VHS format tapes only, not
for recording.
3
Before Playback :
◆ Turn on a TV and press the TV/VIDEO button to select
video mode.
1
Inset the SVHS format tape that you want to see.
1
2
Press PLAY (❿ll ) to start playing the cassette.
2
Place a disc gently into the tray with the disc’s label facing up.
3
Press SVHS button to start SQPB.
3
Press the ❿ll (PLAY/STILL) button or OPEN/CLOSE button to
close the disc tray.
☛
If the SQPB is on during normal playback, the video
output is distorted.
Press the OPEN/CLOSE button.
☛ When
RESUME function :
you stop disc play, the player remembers where you
➢
➢
44
1
stopped, so when you press PLAY again, it will pick up
where you left off (unless the disc is removed, the STOP
button is pressed twice or the player is unplugged.).
◆ If the player is left for 5 minutes in still mode, it will
stop.
◆ This icon indicates an invalid button press.
3
Before using the DVD operation, press the DVD button
on the remote control to watch and select DVD.
1
Stopping Playback. Press the STOP button during playback.
2
Removing Disc. Press the OPEN/CLOSE button.
3
Stilling Playback.
Press the ❿ll (PLAY/STILL) button on the remote during
playback.
◆ Screen stops, no sound.
◆ To resume again, press ❿ll (PLAY/STILL) button once
again.
4
Step Motion Playback (Except CD)
Turn the JOG dial the remote during stilling playback.
◆ Each time the button is pressed, a new frame will appear.
◆ No sound is heard during STEP mode.
◆ Press ❿ll (PLAY/STILL) to resume normal playback.
(You can only perform step motion playback in the forward
direction.)
5
Slow Motion Playback (Except CD)
Press the ❿❿ button on the remote during STILL or STEP mode.
◆ By pressing the ❿❿ button, you can select slow motion
playback for 1/2, 1/4 or 1/8 of normal speed.
◆ No sound is heard during slow mode.
◆ Press ❿ll (PLAY/STILL) to resume normal playback.
◆ When playing, the reverse slow motion playback will not
work.
3
1
5
45
DVD
Using the Search & Skip Functions
DVD
Using the DVD Setup
GB
GB
During playback, you can search quickly through a chapter or track
or use the skip function to jump to the next selection.
1
1
1
2
2
2
During playback, press the ❿❿ or ➛➛ button on the remote.
◆ Press the ❿❿ or ➛➛ button on the remote and press again to
search at a faster speed(2X/4X/8X/16X/32X/128X/normal
speed, in order) on the DVD.
◆ Press the ❿❿ or ➛➛ button on the remote and press again to
search at a faster speed(4X/8X/normal speed in order) on
VCD and CD.
◆ To return to normal speed playback, press the ❿ll
(PLAY/STILL) button.
The Setup menu lets you customize your DVD player by allowing
you to select various language preferences, set up a parental level,
even adjust the player to the type of television screen you have.
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
◆ When in search mode (8X/16X/32X/128X) on a DVD
or high-speed playback on a VCD, no sound will be
heard.
◆ Depending on the disc, audio may not be heard when
a disc is in 2X playback mode.
DVD SETUP
RETURN
œ❷➛❿
Use the Menu preference menu to select the
language you want a DVD’s disc menu to be
displayed in.
• Audio : Setup of the Audio Language
Use the Audio preference menu to select the soundtrack
language.
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
• Subtitle : Setup of the Subtitle Language
Use the Subtitle preference menu to select the
language the disc’s subtitles are to be displayed in.
• Parental : Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as
those with violence, adult subject matter, etc.
• Audio Options : Setup of the Audio Options
• Display Options : Setup of the Display Options use to select
which type of screen you want to watch and
several display options.
4
Use the œor ❷ buttons on the remote to access the different
features.
5
Press the ENTER button to access the sub features.
• To make the setup screen disappear after setting up, press the
RETURN button again.
➢
46
ENTER
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
• Disc Menu : Setup of the Menu Language
During playback, press the ❿❿I (NEXT SKIP) or I➛➛ (BACK SKIP)
button.
◆ When playing a DVD, if you press the ❿❿I (NEXT SKIP)
button, it moves to next chapter. If you press the I➛➛ (BACK
SKIP) button, it moves to the beginning of the chapter. One
more press makes it move to the beginning of the previous
chapter.
◆ When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or
a CD, if you press the ❿❿I (NEXT SKIP) button, it moves to
next track. If you press the I➛➛ (BACK SKIP) button, it moves
to the the beginning of the track. One more press makes it
move to the beginning of the previous track.
◆ If a track exceeds 15 minutes when playing a VCD and you
press the ❿❿I (NEXT SKIP) button, it moves forward 5
minutes. If you press the BACK SKIP button, it moves
backward 5 minutes.
➢
MAIN MENU
Depending on the disc, some DVD SETUP selections may
not work.
47
DVD
Using the Disc Menu Language
DVD
Setting Up the Audio Language Features
GB
MAIN MENU
This function changes the text language only on the disc menu
screens.
1
With the unit in Stop mode, press the SETUP button.
Result:
The MAIN MENU is displayed.
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
4
Press the œ or ❷ buttons to move to Audio.
4
Use the œ or ❷ buttons to select Disc Menu.
5
Press the ENTER button.
5
Press the ENTER button.
6
MAIN MENU
1
DVD SETUP
RETURN
œ❷➛❿
ENTER
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
DISC MENU LANGUAGE
Using the Audio Language:
6
Use the œ or ❷ buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
7
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
Press the œ or ❷ buttons to select ‘English’ .
- Select “Original” if you want the default soundtrack language to be
the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
7
➢ How
to make the SETUP MENU disappear or return to menu
screen during setup ; Press RETURN button.
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
DVD SETUP
œ❷ENTER
RETURN
AUDIO LANGUAGE
❿ English
RETURN
œ❷ENTER
DVD
Using the Subtitle Language
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
Press the ENTER button to select this option.
Result:
The SETUP MENU menu is displayed.
4
Use the œ or ❷ buttons to select Subtitle.
5
Press the ENTER button.
6
Use the œ or ❷ buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the same as the
language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some discs
may not contain the language you select asyour initial language;
in that case the disc will use itsoriginal language setting.
7
➢
48
English
English
Automatic
Unlocked
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
Français
Deutsch
Español
Italiano
Nederlands
Others
œ❷ENTER
ENTER
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
❿ English
RETURN
œ❷➛❿
RETURN
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
SUBTITLE LANGUAGE
❿ Automatic
English
Français
Deutsch
Español
Italiano
Nederlands
Others
RETURN
œ❷ENTER
• If the selected language is not recorded on the disc,
the original pre-recorded language is selected.
• How to make the SETUP MENU disappear or return to
menu screen during set up; Press RETURN button.
49
GB
DVD
Setting Up the Parental Control
DVD
Setting Up the Audio Options
GB
GB
MAIN MENU
The Parental Control function works in conjunction with DVDs that
have been assigned a rating - which helps you control the types of
DVDs that your family watches. There are up to 8 rating levels on a
disc.
DVD SETUP
RETURN
œ❷➛❿
ENTER
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
1
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
4
Use the œor ❷ buttons to select Audio Options. Then press the
ENTER button.
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
5
Use the œ or ❷ buttons to select the desired item. Then press
the ➛ or ❿ buttons.
• Dynamic Compression
• On : To select dynamic compression.
• Off : To select the standard range.
• Center SPK Time Delay (See Page 68)
• Surround SPK Time Delay (See Page 68)
• Dolby Prologic II (See Page 70)
4
Use œ or ❷ to select Parental. Press ENTER. The Parental
Control screen appears.
5
Use ➛ or ❿ to select Yes if you want to use a password. Press
ENTER. The Enter Password screen appears.
6
Enter your password. The Re-enter Password screen appears to
confirm the password. Enter your password again. The Parental
Control screen appears.
œ❷ENTER
RETURN
With the unit in Stop mode, press the SETUP button on the
remote.
Result:
The MAIN MENU is displayed.
1 With the unit in Stop mode, press the SETUP button on the
remote.
Result:
The MAIN MENU is displayed.
PARENTAL CONTROL
Use Password
➛❿ No
7
RETURN
- The Rating Level will work only when Use Password is set to
Yes. To unlock the player, use ➛ or ❿ to select No. Use œ or ❷
to select Rating level. Press ENTER.
ENTER
- Use œ or ❷ to select the level(e.g. Level 6) and press ENTER.
Discs that contain Level 7 will now not play.
CREATE PASSWORD
• How to make the SETUP MENU disappear or return
to menu screen during set up: Press RETURN button.
DVD SETUP
RETURN
œ❷➛❿
8
PRESS 0-9
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
AUDIO OPTIONS
Dynamic Compression
➛❿
Center SPK Time Delay
Surround SPK Time Delay
Dolby Prologic II
RETURN
œ❷
About the Change Password:
- Use œ or ❷ to select Change Password. The Change
Password screen appears.
-Enter your new password. Re-enter the new password again.
PARENTAL CONTROL
Use Password
Rating Level
Change Password
œ❷
RETURN
Yes
8
➢
• How to make the DVD SETUP disappear or return to
menu screen during set up; Press RETURN button.
• If you have forgotten your password, see Forget
Password in the Troubleshooting Guide.
ENTER
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
œ❷
RETURN
50
ENTER
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
- To cancel the rating level, use ➛ or ❿ to select No in Use
Password.
Enter Password
____
RETURN
About the Rating Level :
➢
MAIN MENU
ENTER
51
Off
0ms
0ms
On
On
Off
DVD
Setting Up the Display Options
DVD
S-Video/Component Video Connections (for DVD)
GB
GB
MAIN MENU
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
4
Use the œor ❷ buttons to select Display Options.
Then press the ENTER button.
5
Use the œor ❷ buttons to select the desired item.
Then press the ➛ or ❿ buttons or then press the ENTER button.
Use the œ or ❷ buttons to select the desired item.
Then press the ENTER button.
DVD SETUP
RETURN
œ❷➛❿
ENTER
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
RETURN
English
English
Automatic
Unlocked
œ❷ENTER
4:3 Letter Box : Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the screen.
4:3 Pan-Scan : Select this for conventional size TVs when you
want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off.)
16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
DISPLAY OPTIONS
RETURN
œ❷
1
1
To S-Video Input on Your TV
Connect S-VIDEO OUT to TV
Connect an S-Video cable from the S-VIDEO OUT on the back
panel of the DVD-VCR to the S-Video Input on your television.
• TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
TV Aspect
Black Level
NTSC Disc Output
DVD Out
The S-Video or Component Video connection is only for the DVD
player. The tuner and VCR will still be viewed through the RF or
line inputs.
You must follow the “DVD Out” instructions on page 52 to
activate your alternative (S-Video, Component) video selection.
You can choose EITHER S-Video OR Component, but NOT both.
If your television is equipped with S-Video or Component Video
inputs, you can enjoy superior video quality when watching DVDs
with your DVD-VCR.
4:3 L-Box
Low
PAL 60 Hz
Component
ENTER
2
2
Connect Component Video Out to TV
Connect a component video cable from the COMPONENT VIDEO
OUT (Y, Pb, Pr) on the back panel of the DVD-VCR to the
Component Video Input on your television.
To Component Video Input
on Your TV
• Black Level
Adjusts the brightness of the screen.
• NTSC Disc Output
Depending on a disc, you can play a NTSC DVD disc by
NTSC Disc Output mode.
• DVD Out
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
Video : Sends Composite signal to the Line out JACK.
➢
52
• How to make the DVD SETUP disappear or return to
menu screen during set up: Press the RETURN button.
53
DVD
Special Playback Features
GB
GB
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ❿ll
(Play/Still) button.
1
1
Still
When Playing a DVD
1
Press the ❿ll (Play/Still) button on the remote control during
playback.
Frame Advance (Step)
While in Still mode, turn the JOG dial on the remote control to
advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press ❿ll (Play/Still) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3
3
3
During play, press the DISPLAY button on the remote.
- Current title, chapter number, elapsed time, audio and
subtitle will be displayed.
• Use the NUMBER buttons to enter a different title, then
press the ENTER button.
• Use the ➛, ❿ or NUMBER buttons to enter a chapter number,
then press the ENTER button.
• To enter the time from which you want to start, use the œor
❷ buttons to select, then use the NUMBER buttons to enter
the time. Then press the ENTER button.
• To make the screen disappear, press the DISPLAY button
again.
• The picture will still and the audio will mute.
• To resume playback, press the ❿ll (Play/Still) button.
• If the player is left in Still mode for 5 minutes, it will stop
automatically.
2
DVD
Using the Display Function (DVD/VCD/CD)
DVD
➛❿
VCD
Skip Forward/Back
➛❿
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (❿❿l / l➛➛) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current
chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
When Playing a CD/VCD
1
- Current track NUMBER and elapsed time will be displayed.
Search Forward/Back
• Use the œ or ❷ buttons to select a track. Use the ➛, ❿ buttons
or NUMBER buttons to enter a different track number, then
press the ENTER button.
While a disc is in Play mode, press and hold the Forward/Back
(❿❿ /➛➛) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press ❿ll (Play/Still) button to resume normal speed.
5
➛❿
- To make the screen disappear, press the DISPLAY button again.
Slow Motion
During playback, press the ❿ll (Play/Still) button to Still the image.
Then use the Search Forward (❿❿ ) to play in slow motion at
variable speeds.
• Each press increases the slow motion speed playback to 1/8, 1/4
or 1/2 normal speed.
• Audio is muted during slow motion playback.
• Front Panel Slow Motion Buttons - Press and hold the Forward
buttons on the front panel to activate slow motion playback.
Press the ❿ll (Play/Still) button to resume normal playback.
• Slow motion operates only in the forward direction.
5
CD
• To enter the time from which you want to start, use the œor ❷
buttons to select, then use the NUMBER buttons to enter the
time. Press the ENTER button.
• During CD Play back, ❿❿l/l➛➛ buttons on the remote control
don’t operate but the shuttle allows you to select playback speed
(2X, 4X and 8X).
4
During play, press the DISPLAY button on the remote.
➢
What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar
to tracks on an audio CD).
What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be
considered a title.
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ll
(Play/Still) button.
• Press the ■ (Stop) button twice to completely stop playback.
The next time you press ❿ll (Play/Still), the disc will start over
from the beginning.
54
55
DVD
Repeat Play
GB
Repeat the current track, chapter, title, a chosen section (A-B), or
all of the disc.
1
1
Press the REPEAT button on the remote. Repeat screen appears.
2
Select Chapter, Title or A-B using the ➛ or ❿ buttons.
- Repeat A-B
• Press the REPEAT button. Select A-B on screen with the
➛ or ❿ buttons on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
DVD
3
Press ENTER.
4
To return to normal play, press REPEAT again, then press the
➛ or ❿ buttons to select Off and press ENTER.
➢
VCD
Track
56
Disc
• DVD repeats play by chapter or title, VCD repeat play by
disc or track.
• Depending on the disc, the Repeat function may not
work.
• If the title or track is completed before marking the end
(B), the end of title or track becomes B automatically.
• When in VCD 2.0 mode (MENU ON mode), this function
does not work.
DVD
Programmed Playback (CD)
GB
Programmed Playback lets you set a custom order for playback of
tracks on a CD.
1
1
Open Playback Mode Menu
In play mode, press the MODE button.
2
Select “PROGRAM”
Using the left/right buttons, move the selection bar to “PROGRAM”
then press ENTER to select.
3
Select Track
Press the up/down and left/right buttons to select the first track in
your revised playback list, then press the ENTER button.
4
Program Playback Order
Use the up/down and left/right buttons to select the remaining
tracks, pressing Enter after each.
• Press the CLEAR button to change selections.
PROGRAM 01
Track
5
Play Revised Order
Press the ❿ll (Play/Pause) button. The disc will play back in the
custom programmed order.
• While in playback mode, press the CLEAR button on the remote
control to cancel Programmed Play.
01
05
09
13
02
06
10
14
03 04
07 08
11 12
15 16 ❿
œ❷➛❿
RETURN
CLEAR
Program Order
01 - - - - - -- -- -- --- -- -- --- -- -- --- -- -- -ENTER
PLAY
PROGRAM 02
Track
01
05
09
13
02
06
10
14
03 04
07 08
11 12
15 16 ❿
œ❷➛❿
RETURN
CLEAR
Random Playback lets the DVD-VCR set a random order for
playback of tracks on a CD.
Open Playback Mode Menu
In play mode, press the MODE button.
2
Select “RANDOM”
Using the left/right buttons, move the selection arrow to “RANDOM”
then press ENTER to select.
• The disc will playback automatically in random order.
3
ENTER
PLAY
DVD
Random Playback (CD)
1
Program Order
01
-- --- -- -- --- -- -- --- -- -- --- -- -- --
Cancel Random Play
Press the CLEAR button on the remote control to cancel Random
Play.
57
DVD
SCREEN FIT Play
DVD
Selecting the Audio Language (Using the Audio button)
GB
GB
1
During play, press SCREEN FIT button on remote control.
- Allows you to eliminate the black bars in the top and bottom of
the screen when a movie is playing in the Widescreen
format(16:9).
- Screen Fit will not work when the Zoom mode is active. (you can
not remove the black bars on the screen) However, Zoom mode
will work when Screen Fit is active.
1
➢
• Various aspect ratios are available only in multiple screen
format discs.
• This function does not work when a DVD has been recorded
with a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to
their aspect ratio.
You can select a desired language quickly and easily with the
AUDIO button.
1
Press the AUDIO button.
2
Use the œor ❷ buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
➢
• This function depends on what languages are encoded
on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
1
DVD
• How to have the same audio language come up
whenever you play a DVD; Refer to “Setting Up the
Language Features” on page 49.
DVD
Selecting the Subtitle Language (Using the Subtitle button)
You can select a desired subtitle quickly and easily with the
subtitle button.
1
Press the SUBTITLE button.
2
Use the œor ❷ buttons to select the desired subtitle language.
3
Use the ➛ or ❿ buttons to determine whether or not the subtitle will
be displayed.
1
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
A
➢ • the
This function depends on what languages are encoded on
disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up
whenever you play a DVD; Refer to “Setting Up the
Language Features” on page 49.
58
A
59
DVD
Changing the Camera Angle
DVD
Using the Bookmark Function (DVD/VCD)
GB
GB
When a DVD contains multiple angles of a particular scene,
you can select the Angle function.
1
Press the ANGLE button to see if an ANGLE (
) mark
is present at the upper left hand corner of the screen.
1
When an ANGLE mark is shown, press the ANGLE button, then
an ANGLE select icon will appear at the upper left hand corner of
the screen.
2
Use the œor ❷ buttons to select the desired screen angle.
3
To turn off the display, press the ANGLE button again.
The Bookmark function lets you select parts of a DVD or VCD
(MENU OFF mode) so that you can quickly find the section at a
later time.
1
During play, press the MARK button on the remote. The Bookmark
icons will be displayed.
2
Use the ➛ or ❿ buttons to move to the desired bookmark icon.
3
When you reach the scene you want to mark, press the ENTER
button. The icon will change to a number (1, 2, or 3).
4
Press the MARK button to turn off the display.
DVD
Recalling a Marked Scene
1
During play, press the MARK button on the remote.
2
Use the ➛ or ❿ buttons to select a marked scene.
3
Press the PLAY/STILL button to skip to the marked scene.
DVD
Clearing a Mark
1
During play, press the MARK button on the remote.
2
Use the ➛ or ❿ buttons to select the bookmark number you want
to delete.
3
Press the CLEAR button to delete a bookmark number. Press the
MARK button to turn off display.
➢
60
1
• Up to three scenes may be marked at a time.
• When in VCD 2.0 mode (MENU ON mode), this
function does not work.
• Depending on the disc, the Bookmark function may not
work.
61
DVD
Using the Zoom (DVD/VCD)
DVD
MP3 Play
GB
GB
2
Use the œ, ❷ or ➛, ❿ button to select the part of the screen you
want to zoom in on.
3
Press the ENTER button.
- During DVD play : press ENTER to zoom in 2X/4X/2X/Normal in
order.
- During VCD play, press ENTER to zoom in 2X/normal in order.
1
Insert Disc
Insert a CD-R with MP3 files into the DVD deck.
• The MP3 main menu will appear after a few seconds and the
first song on the disc will begin playing.
2
Select Folder
MP3
Total : 3
1 music c1
2 music c2
3 music c3
music c1
song1
RETURN
œ❷
ENTER
Press the up/down buttons to select the folder on the CD-R which
contains the MP3 files you want to hear, then press Enter to select.
Total : 12
1 song 1
2 song 2
3 song 3
4 song 4
5 song 5
6 song 6
7 song 7
8 song 8 ❿
music c1
song1
Select MP3 File
Press the up/down buttons to select the desired MP3 file.
• If there are more than 8 MP3 files in the selected folder, press
the left/right buttons to view additional MP3 files.
• File names are truncated to eight characters: the first six
characters of the song, plus an asterisk (*), then a number.
• Press the Return button to back up and select another folder.
4
RETURN
œ❷
Play MP3 File
Press the ENTER button on the remote control to play the selected
song.
• While the song is playing, you can use the up/down buttons to
browse through other folders.
5
Stop MP3 Selection
Press the ■ (Stop) button on the remote control to stop playback.
* To ensure proper playback of discs burned from MP3 files, make
sure the files have been recorded at a bit rate of at least 128 kbps.
* If there are any gaps (blank data) on multi-session discs, you may
experience playback problems.
* On discs that are recorded with a Variable Bit Rate(VBR), e.g.
from 32 to 320 kbps, the sound may cut in and out.
* When the REPEAT button is pressed during playback, the current
song will be played back repeatedly.
63
~
3
MP3
~
• If there are more than 8 folders on the disc, press RETURN to
view additional folders.
• If there are no folders on the CD-R, skip to Step 3.
62
~
During play or still mode, press the ZOOM button on the remote. A
square will be displayed on screen.
~
1
1
MP3 is a popular music format which allows you to compress
music files up to 1/12 of their original size while retaining near CD
quality sound. Your DVD-VCR can playback MP3 files burned onto
a CD-R disc.
ENTER
DVD
MP3 Play (CD-R MP3 disc requirements)
Connecting the FM and AM antennas
GB
GB
When playing CD-R MP3 discs, please follow the recommendations below:
1
• Your MP3 files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and
with Apple's Mac. These two formats are the most widely used.
• When naming your MP3 files do not exceed 8 characters, and place ".mp3" as the file
extension. General name format of: Title.mp3. When composing your title, make sure that you
use 8 characters or less, have no spaces in the name, and avoid the use of special characters
including: (.,/,\,=,+).
FM antenna connections
• Connect the FM antenna to the FM 75Ω COAXIAL terminal.
• Unwind the antenna wire and then fasten it to a wall in an area
where reception is best.
- If reception is poor, connect the outdoor antenna.
Remove the existing FM antenna before connecting the 75Ω
coaxial cable.
2
AM antenna connections
• Connect the AM loop antenna to the AM and
terminals on
the back of the unit.
• Rotate the loop antenna until you have the best reception.
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate (conversion
to MP3 format) of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like
192 Kbps or more, only rarely give better sound quality. Conversely, files with sampling rates
below 128 Kbps will not be played properly.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files
are of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and
SDMITM (registered trade mark of The SDMI Foundation). You cannot copy such files.
AM antenna
• Your DVD player only accepts one level of file directory. Consequently you must choose:
- either to save all your MP3 recording files at the root of the disc;
- and/or create folders in the directory for each artist or music type (e.g.classical, rock, jazz, etc)
FM antenna
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality. You should note that certain
technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these
files on your DVD player (degraded sound quality and in some cases, inability of the player to
read the files).
Cooling fan
The cooling fan in the rear center of the unit ensures reliable operation and protects it from overheating.
It will operate automatically as needed to circulate cool air when the temperature rises past a set threshold.
For safety, please take note of the following points:
• Make sure that the unit is well-ventilated. Poor ventilation may cause damage by overheating.
• Make sure that the cooling fan or ventilation holes are not obstructed. (If the ventilation holes are blocked by newspaper,
clothes, etc., heat builds up inside the main unit, resulting in a risk of fire.)
• When the power is supplied to the main unit, the cooling fan will be activated.
64
65
LINE 3 AUDIO Setting
Connecting the Speakers
GB
GB
Connect the front, center, and surround speakers and the
subwoofer to the speaker terminals on the back of the main unit.
1
MAIN MENU
Open “MAIN MENU”
With the DVD in stop mode, press the SETUP button.
1
2
Connect the speakers to the speaker output terminals on the back
of the main unit, matching the colors.
Select “Option”
Using the up/down and left/right buttons, move the selection cursor
to “USER SET”, then press ENTER to select.
Caution
3
Do not set the Speakers (except center speaker) near the TV or Monitor
because the Speakers (except center speaker) are not magnetic shielded.
œ❷➛❿
ENTER
Select “LINE3 AUDIO”
Move the selection arrow to “LINE3 AUDIO”, then press right to
select from the following options.
• RCA - Analog Audio input
• Optical - Digital Audio input
➢
USER SET
RETURN
Optical(Digital Audio Input) is available for PCM and
Dolby Digital only.
Australia Model
USER SET
COLOUR SYSTEM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
:AUTO
:ON
:OFF
:OFF
:RCA
œ❷➛❿
RETURN
Newzealand Model
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
LINE3 AUDIO
Center Speaker
Surround
Speaker (L)
Surround
Speaker (R)
œ❷➛❿
RETURN
Speaker Volume Control
1
AMP Volume Control
• Connect the speaker to the speaker jack on the rear.
• The volume can be adjusted from level 20.
• When you turn the power ON, if the last volume level was over
20, the volume will be set to 20, and if it was under 20, the
volume will be set to that level.
Front Speaker (L)
Front Speaker (R)
Subwoofer
(for LFE)
66
2
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
H/PHONE Volume Control
• You can adjust the volume by connecting the H/PHONE to the
H/PHONE JACK on the front panel.
• The volume can be adjusted from level 31, and the AMP SPEAKER
will be muted.
• The LINE OUT AUDIO will be output continuously while the
H/PHONE is connected.
67
Speaker setup
Speaker setup
GB
GB
Ideal speaker
placement
1
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2
Select “DVD”
Using the up/down and left/right buttons, move the selection cursor
to “DVD Setup”, then press ENTER to select.
3
To adjust the speaker balance
1
2
(A) Distance (feet/inch)
Value (ms)
0.00
1.12
2.23
3.34
4.46
5.58
0.00
13.38
26.77
40.15
53.54
66.93
(B) Distance (feet/inch)
Value (ms)
0.00
3.35
6.69
10.03
13.39
16.73
0.00
40.15
80.31
120.47
160.62
200.79
Setting the delay time
Ideal speaker placement
1
Use the + and - buttons to adjust the volume on the desired
speaker.
2
• The volume can be adjusted with in the range of -12 to 0 to +12.
You can customize the sound to best fit the specific acoustics of the
room by adding a delay to the sound from the center and surround
speakers.
The delay time is initially set to 0 ms.
◆ You can enjoy the best sound during 5.1 channel surround
playback if the distance between you and each speaker is the
same. You can adjust the delay time for the center and surround
speakers according to the placement of the speakers in the
room.
◆ For the center speaker
If the distance of Dc is equal to or longer than the distance of
Df, set the delay time to 0 ms.
Otherwise, change the value according to the table.
(A)=Df-Dc
◆ For the surround speakers
If the distance of Df is equal to the distance of Ds, set the delay
time to
0 ms.
Otherwise, change the value according to the table shown on
the right.
(B)=Df-Ds
1
• Each time you press the button, the speaker is selected in the
order of FL➝ C ➝ FR ➝ SR ➝ SL ➝ SW ➝ VOL.
You will see this on the unit's display.
Select “Audio Options”
Move the selection bar to “Audio Options”, then press ENTER to
options.
Ideal speaker placement
Press the SPEAKER button.
2
To test the speakers
1
Press the TEST button.
• Each time you press the button, the test tone will be heard
in the order of FL (Front speaker/L) ➝ C (Center speaker) ➝
FR (Front speaker/R) ➝SR (Surround speaker/R) ➝
SL (Surround speaker/L) ➝ SW (Subwoofer).
2
1
To stop the test tone, press the TEST button again.
➢ You
can adjust the speaker balance for the selected channel
using the Volume Control buttons during the test tone
operation.
Center speaker
Place the speaker directly over or under the TV. But, ideally, the
center speaker should be positioned with the top surface flush
with the front speakers..
2
Front speakers
Place the front speakers so that their tweeters (high-range) are
aligned at about the same height as ear level and at a horizontal
angle of 45° with respect to the prime listening position.
3
Surround speakers
Place these speakers behind your listening position, facing slightly
inwards, about 2 to 3 feet (60 to 90 cm) above ear level.
If there isn't enough space behind the listening position (i.e., close
to the wall), place the surround speakers at either side with their
front surfaces facing each other.
4
Subwoofer
The position or orientation of the subwoofer is not as critical.
Place it anywhere you want.
68
69
Dolby Pro Logic II decoder
SOUND mode/effect function
GB
GB
1
Dolby Pro Logic II is a new format for playing multichannel audio
signals that offers improvement over conventional Dolby Pro Logic.
It can be used to decode not only sources recorded in Dolby
Surround, but also regular stereo sources into five channels (front
left/right, center and surround left/right). In addition, various
parameters can be set according to the type of source and contents,
so you can adjust the sound field with greater precision.
This feature simulates the sound of different acoustic spaces.
1
Select the source you want to use. (CD, Video, FM/AM, Input
(LINE1, LINE2, LINE3, TV CH))
1
2
2
• Each time you press the button, the sound effect changes as
follows.
PL II
• Each time you press the button,
the sound mode changes as
follows.
NATURAL
1
JAZZ
• The SOUND mode adds a coustic
surround effect during playback of
stereo analog or linear PCM digital
signals.
Press the SOUND MODE button.
• Press the SOUND MODE button repeatedly to select Dolby Pro
Logic II.
Press the SOUND EFFECT button.
Press the SOUND MODE button.
CONCERT
STADIUM
2
Press the SOUND EFFECT button.
2
• Each time you press the button, the selection alternates between
EFFECT 1 and EFFECT 2.
• The higher the number, the greater the effect.
• If you press the button while in the STEREO mode, the selection
alternates between STEREO and 4 STEREO.
• When in 4 STEREO mode, you’ll hear equal output from
the front and rear speakers.
3
Select the desired mode ("MATRIX”, "MOVIE", or "MUSIC").
• Matrix: Use when playing sources recorded in monaural.
• Movie: Use this when viewing movies.
Dolby Pro Logic II
● : 5.1ch
OFF
PL II
STEREO
NATURAL
JAZZ
CONCERT
STADIUM
Video Tape
●
▲
●
●
●
●
TV, FM/AM
●
▲
●
●
●
●
LINE 3
●
▲
●
●
●
●
OPTICAL
(PCM)
●
▲
●
●
●
●
• Music: Use this mainly for music listening.
Mode
➢ ◆ Dolby Pro Logic II may not be selected depending on the
disc used. (DTS DVD, Dolby Digital 5.1, VCD, MP3)
◆ When playing a DVD recorded in 2-channel Dolby Digital,
it will automatically be output in Dolby Pro Logic II.
◆ Dolby Pro Logic II operates only when CD, VIDEO,
FM/AM, or INPUT (LINE1, LINE2, LINE3 or TV Broadcast) is
selected. Mode, Sound Effect cannot be selected while the
DVD signal is being input.
▲ : STEREO
ON
Source
➢ ◆ The Sound mode and effects do not Work With Dolby Digital, DTS, VCD, MP3, LPCM
disc, and Optical Input(OPTICAL) sources.
◆ Dolby Digital, DTS, Optical Input (Dolby Digital) : 5.1-Channel speaker output
◆ VCD, MP3, LPCM, Optical Input (PCM) : Outputs to the front left, right, and subwoofer
speakers only.
◆ During DTS or MPEG playback, audio is output only to the speakers.
Audio is not output using other connections.
70
71
Listening to radio broadcasts
Technical Specifications
GB
GB
You can automatically or manually tune in to FM and AM stations
to listen to radio broadcasts.
Rated voltage
1
Press the FM/AM button.
• Each time you press the button, the band alternates between
FM and AM.
1
2
2
➢ The FM/AM function cannot be selected while operating the
AC 220 - 240V, 50Hz
Operating ambient temperature
+5°C ~ +35°C
Installation conditions
Operation position : Horizontal,
Video input (Rear)
RCA jack : 1.0Vp-p (unbalanced) 75Ω
Audio input (Rear)
RCA jack : -8dBm, 47Kohm unbalanced
Relative humidity : Below 75%
Tune in to a station.
• Automatic tuning : Hold down l➛➛ / ❿❿l to begin the
automatic tuning.
• Manual tuning : Press l➛➛ to tune in to a lower frequency, or
press ❿❿l to tune in to a higher frequency.
2
General
Input
RF out
UHF 21-69 (Initial CH36) : Newzealand model
UHF 28-69 (Initial CH38) : Australia model
Output
DVD player or VCR.
Audio (DVD, VCR)
RCA jack
Video (DVD, VCR)
RCA jack
Video (DVD only)
S-Video out
COMPONENT out : RCA jack
Tape format
VHS type video tape,
S-VHS type video tape (Playback only)
Presetting stations
1
1
2
3
3
3
4
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
Tuning system
B/G, D/K : Newzealand model
B/B : Australia model
VCR
Example: Storing an FM station of 89.1 MHz into the preset number
02 of the FM1 band
2
Color system
Press the FM/AM button to select the FM band.
• Each time you press the button, the band alternates between
FM and AM.
DVD
Select a channel to choose the memory address to which you want
to store the station.
Use the ➛➛ and ❿❿ buttons to tune in to 89.1 FM.
Press the ■ button or the ENTER button on the remote control.
Video S/N
Above 43dB (standard recording)
Resolution
Above 240 lines (standard recording)
Audio S/N
Above 68dB (Hi-Fi), 39dB (Mono)
Audio frequency characteristics
20Hz - 20KHz (Hi-Fi)
Disc
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)
Audio S/N
95dB
Audio dynamic range
100dB
FM
AM
15 dB
64 dB
S/N RATIO
60 dB
35 dB
THD
0.5 %
2%
SENSITIVITY
RECEIVER
• 89.1 FM is stored in FM1.
5.
4
6.
Select a channel to select a preset station number.
Press the ■ STOP button or ENTER button again to store FM
station 89.1 to FM 1.
7.
To store other stations Repeat steps 1 to 6 above.
• You can use the CHANNEL button to store up to 20 FM stations
and 10 AM stations.
➢
72
•
will be indicated when tuned to an FM station.
• To store other channels, repeat the steps 2 to 4 above.
73
Problems and Solutions (VCR)
GB
GB
Before contacting the Samsung after-sales service, perform the following simple checks.
AMP
SPEAKER
FRONT SPEAKER
50W X 2 (6Ω)
CENTER SPEAKER
50 W (6Ω)
Problem
SURROUND SPEAKER
50 W X 2 (6Ω)
SUBWOOFER SPEAKER
100 W (3Ω)
FREQ.RESPONSE
20 Hz ~ 20kHz
S/N RATIO
75 dB
CHANNEL SEPERATION
50 dB
SPEAKER SYSTEM
FRONT/CENTER/SURROUND
You cannot insert a video cassette
◆
A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme was not recorded
◆
◆
◆
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆
◆
◆
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
SUBWOOFER SPEAKER
3Ω
30Hz ~ 400Hz
No playback picture or the picture
is distorted
◆
Check to see if you are using a prerecorded tape.
55Hz ~ 23kHz
87dB/W/M
86dB/W/M
You cannot see normal broadcasts
◆
50W
100W
FRONT
110(W)x129(D)x100(H)
SURROUND
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
250(W) x 250(D) x 380(H)
O.S.L
RATING INPUT
CENTER
WEIGHT
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
6Ω X 5
FREQ. RESPONSE
SIZE
◆
◆
5.1 CHANNEL SPEAKER SYSTEM
IMPEDANCE
Explanation/Solution
No power
150(W)x129(D)x100(H)
FRONT
0.72kg x 4 = 2.88kg
SURROUND
CENTER
1.1kg
5.9kg
◆
Noise bars or streaks on playback
◆
Press the PROG/TRK (œ or ❷) buttons to minimize this
effect.
When the ❿II button is pressed
during playback, the still picture
has severe “noise bars” streaks
◆
A still picture may have “noise bars”, depending on the
condition of the tape. Press the PROG/TRK (œ or ❷) buttons
during SLOW motion to minimize this effect.
Video Head Cleaning
◆
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the DVD-VCR
your TV does not find the screen or the
screen when found suffers from
interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVDVCR” (see page 14).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 23), move the channel number
several channels down from the original setting.
(example: from 38 to 40).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 14).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
If you are unable to solve the problem after reading the above instructions, note:
◆ The model and serial number on the rear of your DVD-VCR
◆ The warranty information
◆ A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
74
75
Troubleshooting Guide (DVD)
GB
Before requesting service (troubleshooting)
Problem
Disc does not play.
Action
Page
◆
◆
◆
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
VIDEO-CD or a CD.
P6
◆
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
◆
Some of the functions selected in the DVD SETUP may not work
properly if the disc is not encoded with the corresponding function.
◆
The Screen Ratio is fixed on your DVDs.
The
icon appears on
screen.
Playback mode differs from
the Setup Menu selection.
The screen ratio cannot be
changed.
THIS APPLIANCE IS DISTRIBUTED BY
P47-52
P52
◆
Press power on from a cold start with no disc in the unit. Press the
❿❿ and ➛➛ buttons simultaneously on the front panel for five
seconds. Switch off and on the DVD-VCR by pressing
STANDBY/ON button. The Parental Mode is now unlocked as
indicated on the display. You can now set your rating level and
change your password to a new number.
◆
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
Forgot password
If you experience other
problems.
◆
www.samsung.com.au
76
AK68-00096P(01)
2003.02.21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising