Samsung HT-P10 Instruction manual

Add to my manuals
34 Pages

advertisement

Samsung HT-P10 Instruction manual | Manualzz

THIS APPLIANCE IS MANUFACTURED BY:

AH68-01712K

DIGITAL HOME

CINEMA SYSTEM

HT-RP16

Instruction Manual

V I D E O

COMPACT COMPACT

DIGITAL AUDIO DIGITAL VIDEO

Safety Warnings

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LASER CLASE 1

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE REAR COVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product.

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION-INVISIBLE LASER RADIATION WHEN OPEN

AND INTERLOCKS DEFEATED, AVOID EXPO-

SURE TO BEAM.

This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.

This symbol alerts you to important operating and maintenance instructions accompanying the unit.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

Precautions

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.

GB

During thunderstorms, disconnect AC main plug from the wall outlet.

Voltage peaks due to lightning could damage the unit.

Do not expose the unit to direct sunlight or other heat sources.

This could lead to overheating and malfunction of the unit.

1

Phones

Protect the player from moisture(i.e. vases) , and excess heat

(e.g.fireplace) or equipment creating strong magnetic or electric fields

(i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.

Use of this product is for personal use only.

Condensation may occur if your player or disc has been stored in cold temperatures.

If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment.

Do not dispose of batteries in the general household trash.

2

Features

Multi-Disc Playback & FM / AM Tuner

The HT-RP16 combines the convenience of multi-disc playback capability, including DVD, VCD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a sophisticated FM/AM tuner, all in a single player.

Dolby Pro Logic II

Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro Logic.

DTS (Digital Theater Systems)

DTS is an audio compression format developed by Digital Theater

Systems Inc. It delivers full-frequency 5.1 channel sound.

TV Screen Saver Function

The HT-RP16 automatically brightens and darkens your TV screen after 3 minutes in the stop mode.

The HT-RP16 automatically switches itself into the power saving mode after 20 minutes in the screen saver mode.

Power Saving Function

The HT-RP16 automatically shuts itself off after 20 minutes in the stop mode.

Customized TV Screen Display

The HT-RP16 allows you to select your favorite image during JPEG,

DVD or VCD playback and set it as your background wallpaper.

To Install as All-In-One Type

You can enjoy 5.1 channel surround sound by installing the front (2), the rear (2) and the center (1) speakers into the speaker box and placing the speaker box over or next to the TV.

3

Contents

PREPARATION

Safety Warnings..................................................................................................................................................................1

Precautions .........................................................................................................................................................................2

Features..............................................................................................................................................................................3

Notes on Discs....................................................................................................................................................................5

Description ..........................................................................................................................................................................7

CONNECTIONS

Connecting the Speakers ...................................................................................................................................................11

How to install speakers.......................................................................................................................................................13

Connecting the Video Out to TV.........................................................................................................................................15

P.SCAN(Progressive Scan) Function .................................................................................................................................16

Connecting External Component........................................................................................................................................17

Connecting the FM and AM Antennas................................................................................................................................18

OPERATION

Before Using Your Home Theater.......................................................................................................................................19

Disc Playback .....................................................................................................................................................................21

MP3-CD Playback ..............................................................................................................................................................22

JPEG File Playback ............................................................................................................................................................23

DivX Playback.....................................................................................................................................................................25

Displaying Disc Information ................................................................................................................................................27

Checking the Remaining Time............................................................................................................................................27

Fast/Slow Playback ............................................................................................................................................................28

Skipping Scenes/Songs......................................................................................................................................................28

Repeat Playback.................................................................................................................................................................29

A-B Repeat Playback..........................................................................................................................................................31

Step Function......................................................................................................................................................................32

Angle Function32

Zoom (Screen Enlarge) Function .......................................................................................................................................33

EZ VIEW Function ..............................................................................................................................................................33

Selecting Audio/Subtitle Language .....................................................................................................................................34

Moving Directly to a Scene/Song .......................................................................................................................................35

Using Disc Menu.................................................................................................................................................................36

Using the Title Menu ...........................................................................................................................................................36

SETUP

Setting the Language..........................................................................................................................................................37

Setting TV Screen type.......................................................................................................................................................39

Setting Parental Controls (Rating Level) ............................................................................................................................41

Setting the Password..........................................................................................................................................................42

Setting the Wallpaper .........................................................................................................................................................43

Setting the Speaker Mode ..................................................................................................................................................45

Setting the Test Tone ..........................................................................................................................................................46

Setting the Delay Time .......................................................................................................................................................47

Setting the Audio Quality ....................................................................................................................................................49

Setting the DRC (Dynamic Range Compression) ..............................................................................................................51

AV SYNC Setup..................................................................................................................................................................52

Dolby Pro Logic II Mode .....................................................................................................................................................53

Dolby Pro Logic II Effect .....................................................................................................................................................54

Sound Field (DSP)/EQ Function.........................................................................................................................................55

Sleep Timer Function..........................................................................................................................................................56

RADIO OPERATION

Listening to Radio ...............................................................................................................................................................57

Presetting Stations..............................................................................................................................................................58

MISCELLANEOUS

Operating a TV with the Remote Control ...........................................................................................................................58

Adjusting Display Brightness ..............................................................................................................................................61

Mute Function .....................................................................................................................................................................61

Cautions on Handling and Storing Discs............................................................................................................................62

Before Calling for Service ...................................................................................................................................................63

Language Code List............................................................................................................................................................65

Specifications......................................................................................................................................................................66

4

GB

Notes on Discs

5

V I D E O

DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall.

1 ~ 6

DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is given on the rear panel of the player.

(Your DVD player will only play DVDs that are labeled with identical region codes.)

Playable Discs

Disc Type Mark (Logo) Recorded Signals

DVD

VIDEO-CD

AUDIO-CD

COMPACT

DIGITAL VIDEO

COMPACT

DIGITAL AUDIO

Audio + Video

Audio + Video

Audio

Disc Size

12cm

8cm

12cm

8cm

12cm

8cm

Max. Playing Time

Approx. 240 min. (single-sided)

Approx. 480 min. (double-sided)

Approx. 80 min. (single-sided)

Approx. 160 min. (double-sided)

74 min.

20 min.

74 min.

20 min.

Do not use the following types of disc!

• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.

If such discs are played, a " WRONG DISC FORMAT " message appears on the TV screen.

• DVD discs purchased abroad may not play on this player.

If such discs are played, a " WRONG REGION CODE " message appears on the TV screen.

Copy Protection

• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

• This product incorporates copyright protection technology that is protected by methods claims of certain

U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

Disc Recording Format

CD-R Discs

• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc.

• Use a 650MB/74 minute CD-R disc.

Do not use CD-R disk over 700MB/80 minute as much as possible since it may not be played back.

• Some CD-RW (Rewritable) media, may not be playable.

• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc.

CD-R MP3 Discs

• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.

• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).

• Use discs recorded with a compression/decompression data rate greater than 128Kbps.

• Only files with the ".mp3" and ".MP3" extensions can be played.

• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment.

• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.

• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate

(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.

• A maximum of 500 tracks can be played per CD.

• A maximum of 300 folders can be played per CD.

CD-R JPEG Discs

• Only files with the ".jpeg" and ".JPEG" extensions can be played.

• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.

• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.

• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).

• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment.

• A maximum of 9,999 images can be stored on a single CD.

• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.

• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.

6

GB

Description

—Front Panel—

Power ( ) button

Stop ( ) button

Function button

Open/Close button

Play/Pause ( ) button

—Rear Panel—

External Audio Component

Input Connector

COMPONENT VIDEO OUTPUT jacks

Connect a TV with component video inputs to these jacks.

AM Antenna Connector

GB

Disc Tray

Standby indicator

Volume buttons

Tuning Up & Skip ( ) buttons

Tuning Down & Skip ( ) buttons

P.SCAN indicator

DOLBY DIGITAL indicator

DTS Disc indicator REPEAT indicator

LINEAR PCM indicator

TITLE indicator

GROUP indicator

CHAPTER indicator

TRACK indicator

PROGRAM indicator

PBC indicator

TUNER indicator

STEREO indicator

DSP indicator

RRSS indicator

MPEG indicator

DVD AUDIO indicator

PRO LOGIC indicator

7

System Status Display

RADIO FREQUENCY indicator

SPEAKER indicator

5.1 Channel Speaker

Output Terminals

Cooling Fan

Video Output Connector

Connect the TV's video input jacks

(VIDEO IN) to the VIDEO OUT connector.

Accessories

FM Antenna Connector

Video Cable AM Antenna FM Antenna User's Manual Remote Control

Speaker Contents

Before installing your speaker system, please check that all the following contents are included in the package.

Front Speakers (2) Center Speaker

Subwoofer Speaker

Rear Speakers (2)

Speaker Accessories

Speaker Box

Elevation Adjusting Bar Speaker Cables (6)

8

Description

—Remote Control—

TV indicator

TV, DVD POWER button

MODE button

SLEEP button

Number(0~9) buttons

REMAIN button

DSP/EQ button

VOLUME button

MENU button

SUB TITLE button

RETURN button

STEP button

ZOOM button

LOGO COPY button

SLIDE MODE button

REPEAT button

MO/ST, SLOW button

DIGEST button

9

Range of Operation of the Remote Control

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

DVD RECEIVER indicator

OPEN/CLOSE button

TV/VIDEO, DIMMER button

DVD button

TUNER button

AUX button

CANCEL button

Play/Pause button Stop button

Tuning Preset/CD Skip button

RRSS button

TUNING/CH button

INFO. button

AUDIO button

Cursor/Enter button

MUTE button

TEST TONE button

SOUND EDIT button

PL II EFFECT button

EZ VIEW, NT/PAL button

PL II MODE button

TUNER MEMORY, P.SCAN button

Insert Remote Batteries

1

Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow.

2

Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).

3

Replace the battery cover.

Caution

Follow these precautions to avoid leaking or cracking cells:

• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).

• Use the correct type of batteries.Batteries that look similar may differ in voltage.

• Always replace both batteries at the same time.

• Do not expose batteries to heat or flame.

—Locations—

Fixing Latch

Front Speaker (Left)

Rear Speaker (Left)

Elevation Adjusting Bar

Speaker Box

Front Speaker (Right)

Rear Speaker (Right)

Center Speaker

Elevation Adjusting Leg

10

GB

Connecting the Speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Installing the Speaker System as 5.1CH Separated Type

C

L

SW

R

Center Speaker Rear Speaker (L) Front Speaker (L)

SL SR

Position of the DVD Player

Place it on a stand or cabinet shelf, or under the TV stand.

Front Speakers L R

Place these speakers in front of your listening position, facing inwards (about 45°) toward you.

Place the speakers so that their tweeters will be at the same height as your ear.

Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the

TV. Example: For 32" TVs 2~2.4m (6~8feet)

For 55" TVs 3.5~4m (11~13feet)

Rear Speakers SL SR

• Place these speakers behind your listening position.

• If there isn't enough room, place these speakers so they face each other.

• Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.

* Unlike the front and center speakers, the rear speakers are used to handle mainly sound effects and sound will not come from them all the time.

Center Speaker C

• It is best to install it at the same height as the front speakers.

• You can also install it directly over or under the TV.

Subwoofer SW

The position of the subwoofer is not so critical.

Place it anywhere you like.

11

Rear Speaker (R) Front Speaker (R) Subwoofer

1

Press and hold the terminal tab.

2 Insert the speaker cord.

3 Release the finger.

1 2

Red

3

Black

Note • Connect the red cord to the red (+) terminal and the black cord to the black (-) terminal.

12

GB

How to install speakers

This guide describes RRSS All-In-One and 5.1CH Separated Type installation procedures for the speaker system.

Please read the following installation procedures carefully and install the speaker system properly.

Installing the Speaker System as RRSS All-In-One Type

To Install as All-In-One Type

You can enjoy 5.1 channel surround sound by installing the front

(2), the rear (2) and the center (1) speakers into the speaker box and placing the speaker box over or next to the TV.

RRSS (Rear Reflecting Surround System)

With RRSS, it creates a realistic rear speaker sound from a combined enclosure. The sound waves are reflected off the walls and ceilings to give you the experience of rear surround speakers without their actual placement. As a result, your can experience a true 5.1 surround sound without rear speaker installations.

1 Install all the speakers

(5) into the speaker box by inserting and pushing each of them.

2 Connect the each of the speaker cables.

Note

• In order to prevent damnification all the speakers (5) need to paste a piece of protect film.

3 Press the RRSS button on the remote control and select RRSS ON.

• When you press the button, RRSS ON or RRSS OFF is selected alternatively and the current selection will be displayed on the display of the product.

• If you have installed the speaker system in RRSS All-In-One Type, select RRSS ON.

If you have installed the speaker system in 5.1ch Separated Type, select RRSS OFF.

To adjust speaker elevation

You can adjust the elevation of the front and the rear side of the speaker box so that the speakers face the audience.

Front

You can raise the elevation of the front side of the speaker box using the Elevation Adjusting Leg of the speaker box. To raise the elevation, pull the

Elevation Adjusting Leg on the base plane, and to lower the elevation, push the Elevation Adjusting Leg on the base plane.

Rear

1 . Loosen the Fixing Latch by rotating it counterclockwise.

2 . Adjust the Elevation Adjusting Bar up or down so that the rear of the speaker box becomes your desired elevation.

3 . Fasten the fixing latch completely by rotating it clockwise.

13

Installing the Speaker System as 5.1CH Separated Type

To Install as Separated Type

When the listening room is large enough, you can separate the surround speakers from the speaker box and install the speaker system as 5.1CH speaker system.

1 Lift the speaker lightly and pull it out holding the top and bottom of the speaker.

2 Connect the each of the speaker cables.

3 Drive the screws on the wall and hang each of the front and rear speakers on the screws.

The screw has to be in this position of the hole on the rear side of the speaker.

Note • You cannot install the center speaker on wall.

Installing the Speaker System as Stand Type

(Speaker Stands are Option Modules)

Fix the front and rear surround speakers on the stand and then place each of the speakers on right positions.

14

GB

Connecting the Video Out to TV

Choose one of the three methods for connecting to a TV.

15

METHOD 1

METHOD 2

METHOD 1 Composite Video ...............

Good Quality

Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.

METHOD 2 Component (Progressive Scan) Video ...............

Better Quality

If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.

Note • When the Progressive scan mode is selected, the VIDEO output do not feed any signal.

P.SCAN

(Progressive Scan)

Function

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

1

Press STOP button.

• When disc is played back, press the STOP button twice so that “ STOP ”, appears on the display.

2

Press and hold P.SCAN button on the remote control for over 5 seconds.

• Pressing and holding the button for over 5 seconds will select " Progressive Scan " and " Interlace Scan " alternately.

• When you select P.SCAN, " P.SCAN

" will appear on the display.

GB

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains every other horizontal line in the frame.

The odd field of alternating lines is displayed first, and then the even field is displayed to fill in the alternating gaps left by the odd field to form a single frame.

One frame, displayed every 1/30th of a second, contains two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second.

The interlaced scanning method is intended for capturing a still object.

The progressive scanning method scans one full frame of video consecutively down the screen, line by line.

An entire image is drawn at one time, as opposed to the interlaced scanning process by which a video image is drawn in a series of passes.

The progressive scanning method is desirable for dealing with moving objects.

Note • This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support

Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)

• Depending on the brand and model of your TV, this function may not work.

16

Connecting External Component

Connecting an External Analog Component

Example: Analog signal components such as a VCR or TV.

Audio Cable

(not supplied)

If the external analog component has only one

Audio Out, connect either left or right.

1

Connect Audio In on the Home Theater to Audio Out on the external analog component.

• Be sure to match connector colors.

2

Press AUX on the remote control to select AUX input.

• You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD ➝ AUX FMAM .

17

Connecting the FM and AM Antennas

GB

If AM reception is poor, connect an outdoor AM antenna(not supplied).

FM Antenna (supplied)

AM Loop Antenna

(supplied)

Snap the tabs on the loop into the slots of the base to assemble the

AM loop antenna.

FM antenna connection

1. Connect the FM antenna supplied to the

FM 75Ω COAXIAL terminal.

2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

AM antenna connection

1. Connect the AM loop antenna supplied to the AM and terminals.

• Insert the black wire into the black terminal and the white wire into the white terminal.

2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

Cooling Fan

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

18

Before Using Your Home Theater

Your Home Theater is capable of playing DVD, CD, MP3, DivX and JPEG discs. Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.

1 Plug the main unit's power cord into the

AC power supply.

2 Press MODE button until the DVD indicator lights.

3 Press POWER button to turn on the main unit and then press

DVD button to select “ DVD/CD ” function of the remote control.

TV DVD RECEIVER

4 Press the MODE button until the TV indicator llights.

5

Press POWER button to turn on the Home Theater and then press TV/VIDEO button on your TV remote to select

“ External Input ” mode.

6 Press FUNCTION button on the main unit or DVD on the remote to select

DVD/CD mode.

TV DVD RECEIVER

To Operate the TV and DVD Player with a Single Remote Control

Press MODE button.

• You can operate the TV after TV indicator (red) blinks 1 time, and operate DVD receiver after DVD indicator

(green) blinks 1 time.

• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.

• By default, the remote control is set to work with Samsung TVs.

See page 59 for more information on the operation of the remote control.

19

Disc terminology

Titles and chapters (DVD-VIDEO)

• DVD-video is divided into several large sections called "titles" and smaller sections called "chapters". Numbers are allotted to these sections.

These numbers are called "title numbers" and "chapter numbers".

CHAPTER 1

TITLE 1

CHAPTER 2 CHAPTER 3

TITLE 2

CHAPTER 1 CHAPTER 2

Tracks (Video and music CDs)

• Video and music CDs are divided into sections called "tracks".

Numbers are allotted to these sections. These numbers are called

"track numbers".

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5

Files (DivX)

• DivX is divided into sections called "files".

Numbers are allotted to these sections. These numbers are called

"file numbers".

FILE 1 FILE 2

GB

Note • In this manual, the instructions marked with "DVD ( )" are applicable to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.

Where a particular DVD type is mentioned, it is indicated separately.

• Depending on the content of the disc, the initial screen may appear different.

20

Disc Playback

1 Press OPEN/

CLOSE button to open the disc

2

Load a disc.

• Place a disc gently into the tray with the disc’s label facing up.

Note

• Depending on the content of the disc, the initial screen may appear different.

3 Press OPEN/

CLOSE button to close the disc tray.

DVD VCD CD

• Playback starts automatically.

To stop playback, press STOP during playback.

If pressed once, “ PRESS PLAY ” is displayed and the stop position will be stored in memory.

If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.

(This function works only with DVDs.)

• If pressed twice, “ STOP ” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PLAY/PAUSE during playback.

• To resume playback, press PLAY/PAUSE ( ) button again.

Selecting the Video Format

Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.

• By default, the video format is set to "PAL".

• " NTSC " or " PAL " will appear in the display.

At this time, press the NT/PAL button shortly to select between " NTSC " and " PAL ".

• Each country has a different video format standard.

• For normal playback, the video format of the disc must be the same as the video format of your TV.

21

MP3-CD Playback

Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.

MP3

1 Press the

OPEN/CLOSE button to open the disc tray, and then load the

MP3 disc.

• The MP3 menu screen will appear and playback will start.

• The appearance of the menu depends on the MP3 disc.

2 In Stop mode, use to select the album, and then press the ENTER button.

GB

3 To change the album, use to select another album and then press the

ENTER button.

• To select another album and track, repeat Steps 2 and 3 above.

4

Press the STOP button to stop playback.

Note • Depending on the recording mode, some MP3-CDs may not play.

• Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.

• MP3 file support: MPEG1 LAYER3 (BITRATE : 128KBPS~320KBPS ,

SAMPLING FREQ.: 32K/44.1K/48KHz)

22

JPEG File Playback

JPEG

Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this DVD player.

1

Slide Mode

Place the JPEG disc on the disc tray.

2

Press the OPEN/CLOSE button.

3

Press SLIDE MODE button.

• Playback starts automatically.

• Each time the button is pressed, the image makes the transition as follows:

From top to bottom

From bottom to top

23

Rectangular shape in the center

Vertical blinds effect

Each time a new image is displayed, slide modes

(1~11) will be applied randomly and automatically.

Cancels the slide mode.

Press to skip to the next slide.

• Each time the button is pressed, the slide moves backward or forward.

Digest Function

You can view 9 JPEG images on the TV screen.

1 Press DIGEST button during playback.

• JPEG files will be shown in

9 windows.

2 Press Cursor , , , buttons to select the desired image and then press ENTER button.

• The selected image is played for 5 seconds before moving to the next image.

To view the previous or next image with 9 windows, press .

Rotate/Flip Function

Press Cursor , , , buttons during playback.

Original Image button: Flip Vertically button: Rotate 90°

Counterclockwise button: Rotate 90° Clockwise button: Flip Horizontally

24

GB

DivX Playback

Skip Forward/Back

During playback, press the button.

• Go to the next file whenever you press button, if there are over

2 files in the disk.

• Go to the previous file whenever you press button, if there are over

2 files in the disk.

Fast playback

To play back the disc at a faster speed, press and hold or during playback.

• Each time you press and hold either button, the playback speed will change as follows:

2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.

5 Minute Skip function

During playback, press the , button.

• Playback skips 5 minutes forward whenever you press button.

• Playback skips 5 minutes back whenever you press button.

Zoom Function

1

Press ZOOM button.

• Each time you press the button, your selection will toggle between

“ ZOOM X2 ” and “ ZOOM OFF ”.

2 Press Cursor , ,

, buttons to move to the area you want to enlarge.

Note • DIVX file can be zoomed only in ZOOM X2 mode.

25

Subtitle Display

Press the SUBTITLE button.

• Each time you press the button, your selection will toggle between “ SUBTITLE ON ” (1/1, 1/2 ...) and

“ SUBTITLE OFF ”.

• If the disc has only one subtitle file, it will be played automatically.

Audio Display

Press the AUDIO button.

• Each time you press the button, your selection will toggle between “ AUDIO ON ” (1/1, 1/2 ...) and “ ”.

Note

• " " is displayed when there is one supported language in the disc.

DivX

(Digital internet video eXpress)

DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time.

MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio.

1. Supported Formats

• This product only provides the following media formats. If both video and audio formats are not supported, the user may experience problems such as broken images or no sound.

● Supported Video Formats

Format

Supported Versions

AVI

DivX3.11 ~ 5.1

WMA

V1/V2/V3/V7

● Supported Audio Formats

Format

Bit Rate

Sampling Frequency

MP3

80~384kbps

44.1khz

WMA

56~128kbps

AC3

128~384kbps

44.1/48khz

DTS

N/A

N/A

• Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to

720*480 pixels (16:9). TV screen resolutions higher than 800 will not be supported.

• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback.

2. Caption Function

• You must have some experience with video extraction and editing in order to use this feature properly.

• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder.

Example. Root Samsung_Bluetek_007CD1.avi

Samsung_Bluetek_007CD1.smi

• Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and

Chinese) for the file name.

26

GB

Displaying Disc Information

You can view disc playback information on the TV screen.

Press INFO button.

• Each time the button is pressed, the display changes as follows:

DVD VCD CD MP3 DivX JPEG

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

The information display disappears from the screen

The information display disappears from the screen

The information display disappears from the screen

Screen Display

DVD display

DivX display

VCD display MP3 CD display

CD display TITLE display

appears on the TV screen!

If this symbol appears on the TV screen while buttons are being operated, that operation is not possible with the disc currently being played.

Note

• Depending on the disc, the disc information display may appear different.

• Depending on the disc, you can also select DTS, DOLBY

DIGITAL, or PRO LOGIC.

TRACK (FILE) display

ELAPSED TIME display

CHAPTER display

AUDIO LANGUAGE display

SUBTITLE display

REPEAT PLAYBACK display

DOLBY DIGITAL display

ANGLE display

STEREO (L/R) display

Checking the Remaining Time

Press the REMAIN button.

• For checking the total and remaining time of a title or chapter being played.

Each time the REMAIN button is pressed

TITLE ELAPSED TRACK ELAPSED

DVD VCD

TITLE REMAIN TRACK REMAIN

CD

CHAPTER ELAPSED TOTAL ELAPSED

CHAPTER REMAIN TOTAL REMAIN

27

Fast/Slow Playback

Fast Playback

DVD VCD CD MP3

Press and hold .

• Each time the button is held down during playback, the playback speed changes as follows:

Slow Playback

Press SLOW button.

• Each time the button is pressed during playback, the playback speed changes as follows:

DVD VCD DivX

GB

Note

• Reverse slow playback does not work with VCD and DivX.

Skipping Scenes/Songs

Briefly press .

• Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will be played.

• You cannot skip chapters consecutively.

DVD

VCD MP3

TITLE 01/05 CHAPTER 002/040

DVD RECEIVER SMART NAVI

Something like you

Back for good

More than words

I need you

My love

Uptown girl

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

I need you

My love

Uptown girl

TITLE 01/05 CHAPTER 004/040

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

My love

Uptown girl

• When watching a VCD with a track longer than 15 minutes, each time is pressed, playback will skip back or forward 5 minutes.

28

Repeat Playback

Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).

DVD VCD CD MP3 JPEG

Press REPEAT button.

• Each time the button is pressed during playback, the repeat playback mode changes as follows:

DVD

MP3 JPEG

29

VCD CD

To Select a Repeat Playback Mode in the Disc Information Screen

1

Press INFO button twice.

2

Press Cursor button to move to

REPEAT PLAYBACK ( ) display.

3

Press Cursor button to select the desired Repeat Playback mode.

4

Press ENTER button.

*

For MP3 and JPEG discs, you cannot select

Repeat Play from the information display screen.

DVD

VCD

CD

Repeat Playback Options

CHAPTER : Repeatedly plays the selected chapter.

TITLE : Repeatedly plays the selected title.

RANDOM : Plays tracks in random order.

(A track that has already been played may be played again.)

TRACK : Repeatedly plays the selected track.

DIR : Repeatedly plays all tracks in the selected folder.

DISC : Repeatedly plays the entire disc.

OFF :Cancels Repeat Playback.

Note

• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on. To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc menu. (See page 36.)

30

GB

A-B Repeat Playback

You can repetitively play back a designated section of a DVD.

DVD VCD CD

1 Press twice.

INFO button

• For a VCD or CD, press INFO button once.

2 Press Cursor button to move to REPEAT

PLAYBACK ( ) display.

3

Press Cursor , buttons to select ‘A-’ and then press

ENTER button at the beginning of the desired segment.

• When ENTER button is pressed, the selected position will be stored in memory.

A -

4 Press ENTER button at the end of the desired segment.

• The specified segment will be played repeatedly.

A - B

REPEAT : A—B

A -?

REPEAT : A—

To return to normal playback, press Cursor , buttons to select OFF.

Note

• The A-B Repeat function will not work on an MP3 or JPEG disc.

31

Step Function

DVD VCD

Press STEP button.

• The picture moves forward one frame each time the button is pressed during playback.

Note

• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds.

• No sound is heard during slow playback and step motion playback.

Angle Function

DVD

This function allows you to view the same scene in different angles.

1

Press INFO button.

2 Press Cursor button to move to

ANGLE ( ) display.

1/3 1/3

3

Press Cursor , or numeric buttons to select the desired angle.

• Each time the button is pressed, the angle changes as follows:

1/3

2/3

3/3

Note • The Angle function works only with discs on which multiple angles have been recorded.

32

GB

1

Zoom (Screen Enlarge) Function

This function allows you to enlarge a particular area of the displayed image.

DVD VCD

Press button.

ZOOM 2 Press Cursor , ,

, buttons to move to the area you want to enlarge.

3 Press button.

ENTER

• Each time the button is pressed, the zoom level changes as follows:

SELECT ZOOM POSITION

EZ VIEW Function

DVD

Press EZ VIEW button.

• Each time the button is pressed, the zoom function will switch between On and Off.

• When a movie is played in Widescreen format, black bars at the top and bottom of the TV screen can be removed by pressing the EZ VIEW button.

EZ VIEW EZ VIEW OFF

Selecting Audio/Subtitle Language

1

Audio Language Selection Function

DVD

Press twice.

INFO button 2 Press Cursor , buttons or numeric buttons to select the desired audio language.

• Depending on the number of languages on a

DVD disc, a different audio language

(ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed.

GB

SP 2/3

FR 3/3

Note • You can use the AUDIO button on the remote control to select a audio language.

1

Subtitle Language Selection Function

DVD

Press twice.

INFO button

2 Press Cursor button to move to

SUBTITLE ( ) display.

Note

• This function will not work if the DVD is recorded with multi-camera angle format.

• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.

33

3 Press Cursor button or numeric buttons to select the desired subtitle.

EN 1/3 EN 01/ 03

SP 02/ 03

FR 03/ 03

OFF / 03

OFF

Note

• You can use the SUBTITLE button on the remote control to select a subtitle language.

• Depending on the disc, the Subtitle and

Audio Language functions may not work.

34

Moving Directly to a Scene/Song

DVD VCD CD

1

Press INFO button.

Moving to a Title/Track

2

Press Cursor , buttons or numeric buttons to select the desired title/track and then press ENTER button.

Moving to a Chapter

3 Press Cursor , buttons to move to

Chapter ( ) display.

01/05 001/040 0:00:37 1/1 03/05 001/002 0:00:01 1/1 01/05 001/040 0:00:01 1/1

1

Using Disc Menu

DVD

You can use the menus for the audio language, subtitle language, profile, etc.

DVD menu contents differ from disc to disc.

In Stop mode, press MENU button.

• When playing a VCD (version 2.), this toggles between PBC ON and OFF.

2

Press Cursor , buttons to move to

‘DISC MENU’ and then press ENTER button.

• When you select the disc menu that is not supported by the disc, the " This menu is not supported " message appears on the screen.

3

Press Cursor ,

, buttons to select the desired item.

• Press ENTER button.

Moving to a Chapter

4

Press Cursor , buttons or numeric buttons to select the desired chapter and then press

ENTER button.

01/05 025/040 0:00:01 1/1

MP3 JPEG

Press the numeric buttons.

• The selected file will be played.

• An MP3 or JPEG disc cannot be moved in the disc information screen.

• When playing an MP3 or JPEG disc, you cannot use , to move to a folder.

To move a folder, press (Stop) and then press , .

35

Moving to a Specific Time

5 Press Cursor , buttons to move to time display.

01/05 025/040 1:17:30 1/1

Moving to a Specific Time

6

Press the numeric buttons to select the desired time and then press ENTER button.

01/05 028/040 1:30:00 1/1

Note

• You can press on the remote control to move directly to the desired title, chapter, or track.

• Depending on the disc, you may not be able to move to the selected title or time.

Note

• Disc menu display may be different depending on the disc.

PBC (Playback Control) Function

When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.

PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them.

PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.

1

Using the Title Menu

For DVDs containing multiple titles, you can view the title of each movie.

Depending on the disc, the availability of this feature may vary.

DVD

In Stop mode, press MENU button.

2 Press Cursor , button to move to

‘Title Menu’.

3 Press ENTER button.

• The title menu appears.

Press MENU button to exit the setup screen.

Note • Title menu display may be different depending on the disc.

36

GB

Setting the Language

OSD (On-Screen Display) language is set to English by default.

1 In Stop mode, press MENU button.

2

Press Cursor button to move to

Setup’ and then press ENTER button.

3 Select ‘ Language’ and then press

ENTER button

4

Press Cursor , button to select ‘ OSD

Language’ and then press ENTER button.

5

Press Cursor , button to select the desired language and then press ENTER button.

• Once the setup is complete, if the language was set to English, OSD will be displayed in English.

GB

37

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Note

• To select another language, select OTHER and enter the language code of your country.

(See page 65 for language codes)

AUDIO, SUB TITLE and DISC MENU language can be selected.

Selecting the

OSD Language

Selecting the

Audio Language

(recorded on the disc)

Selecting the

Subtitle Language

(recorded on the disc)

Selecting the Disc Menu

Language (recorded on the disc)

* If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language.

38

Setting TV Screen type

Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.

1 In Stop mode, press MENU button.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

3

Press Cursor button to move to ‘TV

DISPLAY’ and then press ENTER button.

4

Press Cursor , button to select the desired item and then press ENTER button.

• Once the setup is complete, you will be taken to the previous screen.

Adjusting the TV Aspect Ratio (Screen Size)

The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen size, you should adjust the aspect ratio to fit your TV or monitor.

• For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference.

Select "16:9" if you have a widescreen TV.

WIDE

: Select this to view a 16:9 picture in the full-screen mode on your widescreen TV.

• You can enjoy the widescreen aspect.

4:3LB

(4:3 Letterbox)

: Select this to play a 16:9 picture in the letter box mode on a conventional TV.

• Black bars will appear at the top and bottom of the screen.

4:3PS

(4:3 Pan&Scan)

: Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.

• You can see the central portion of the screen only (with the sides of the 16:9 picture cut off).

Note

• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.

• Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting.

GB

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

39 40

Setting Parental Controls (Rating Level)

Use this to restrict playback of adult or violent DVDs you do not want children to view.

1 In Stop mode, press MENU button.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

Setting the Password

You can set the password for the Parental (rating level) setting.

1

Press MENU button.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

GB

3

Press Cursor button to move to

‘PARENTAL’ and then press ENTER button.

4

Press Cursor , button to select the desired rating level and then press

ENTER button.

• If you have selected Level 6, you cannot view DVDs with Level 7 or higher.

• The higher the level, the closer the content is to violent or adult material.

5 Enter the password and then press

ENTER button.

• The password is set to "7890" by default.

• Once the setup is complete, you will be taken to the previous screen.

3

Press Cursor button to move to ‘PASSWORD’ and then press ENTER button.

4 Press ENTER button.

5 Enter the password and then press

ENTER button.

• Enter the old password, a new password, and confirm new password.

• The setting is complete.

Note • This function works only if a DVD disc contains the rating level information.

41

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Note • The password is set to "7890" by default.

If you have forgotten the rating level password, do the following:

• While the player is in the no disc mode, hold the main unit's button for longer than 5 seconds. “INITIALIZE” appears on the display and all settings will return to the default values.

• Press the POWER button.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

42

Setting the Wallpaper

JPEG DVD VCD

While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.

Setting the Wallpaper

1

During playback, press

PLAY/PAUSE button when an image you like appears.

2 Press LOGO button.

• “ COPY LOGO DATA” will be displayed on the TV screen.

COPY LOGO DATA

PAUSE

3 The power will turn off and then back on.

• The selected wallpaper will be displayed.

• You can select up to 3 wallpaper settings.

1

To select one of the 3 wallpaper settings you've made

In Stop mode, press MENU button.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

4

Press to select the desired ‘USER’, and then press

ENTER .

5 Press MENU button to exit the setup screen.

3

Press Cursor button to move to

‘LOGO’ and then press ENTER button.

GB

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

43

Select this to set the

Samsung Logo image as your wallpaper.

Select this to set the desired image as your wallpaper.

44

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.

1 In Stop mode, press MENU button.

2

Press Cursor button to move to

‘Audio’ and then press ENTER button.

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

1 In Stop or no disc mode, press

MENU button.

2

Press Cursor button to move to

‘Audio’ and then press ENTER button.

3

Press Cursor button to move to ‘TEST

TONE’ and then press

ENTER button.

• The test tone will be sent to L ➝ C ➝

R ➝ RS ➝ LS ➝ SW in order.

If the ENTER button is pressed again at this time, the test tone will stop.

GB

3 In the Speaker

Setup, press the

ENTER button again.

4

Press Cursor , ,

, buttons to move to the desired speaker and then press ENTER button.

• For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE.

• For L and R, the mode is set to SMALL.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

SMALL : Select this when using the speakers.

NONE : Select this when no speakers are connected.

Note

• • Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 53).

45

Alternate method: press the TEST TONE button on the remote.

Press TEST TONE button.

• Test tone will be produced as follows:

When playing a DVD or CD, this will work only in Stop mode.

• Use this function to check that each speaker is correctly connected and that there is no problem.

To end the test tone, press TEST TONE button again.

L: Front Speaker (L) C: Center Speaker SW: Subwoofer

R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)

Multi-Channel Pro Logic Mode

Start

46

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.

1 In Stop mode, press MENU button.

2

Press Cursor button to move to ‘Audio’ and then press ENTER button.

3

Press Cursor button to move to ‘DELAY

TIME’ and then press

ENTER button.

4

Press Cursor , ,

, buttons to move to the desired speaker and then press ENTER button.

5 Press Cursor , to set the Delay time.

• You can set the delay time for C between 00 and 05mSEC and for

LS and RS between 00 and

15mSEC.

GB

47

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers.

Note

• With (Dolby Pro Logic II), the delay time may be different for each mode.

• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

• The Center channel is only adjustable on 5.1 channel discs.

• Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms.

Otherwise, change the setting according to the table.

Distance between Df and Dc

0.00 m

0.34 m

0.68 m

1.02 m

1.36 m

1.70 m

Delay Time

0 ms

1 ms

2 ms

3 ms

4 ms

5 ms

• Setting REAR (SURROUND) SPEAKERS

If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Df and Ds

0.00 m

1.02 m

2.04 m

3.06 m

4.08 m

5.10 m

Delay Time

0 ms

3 ms

6 ms

9 ms

12 ms

15 ms

Ideal CENTER

SPEAKER placement

Ideal

SURROUND

SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from CENTER SPEAKER

Ds: The distance from SURROUND SPEAKER

48

Setting the Audio Quality

You can adjust the balance and level for each speaker.

Method 1

When adjusting the audio quality using the setup screen

1 In Stop mode, press MENU button.

2

Press Cursor button to move to

‘Audio’ and then press

ENTER button.

3

Press Cursor button to move to ‘SOUND

EDIT’ and then press

ENTER button.

4

Press Cursor , buttons to select and adjust the desired item.

Press the , buttons to adjust the settings.

Method 2

When manually adjusting with the SOUND EDIT button

Adjusting Front Speaker Balance Adjusting Rear Speaker Balance

1

Press SOUND

EDIT button and then press Cursor

, .

Adjusting Center Speaker Level

2

Press SOUND

EDIT button and then press Cursor

, .

3

Press SOUND

EDIT button and then press Cursor

, .

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

Adjusting Rear Speaker Level

4

Press SOUND

EDIT button and then press Cursor

, .

Adjusting Subwoofer Speaker Level

5

Press SOUND

EDIT button and then press Cursor

, .

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

GB

49

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Note • When the RRSS is activated, SOUND EDIT button will not work, because the

DSP function is automatically activated.

• The adjustments will appear on the main unit's display, not on your TV screen.

Adjusting Front/Rear Speaker Balance

• You can select between 00 and –06 and OFF.

• The volume decreases as you move closer to –6.

Adjusting Center/Rear/Subwoofer Speaker Level

• The volume level can be adjusted in steps from +6dB to –6dB.

• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

50

Setting the DRC (Dynamic Range Compression)

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

1 In Stop mode, press MENU button.

2

Press Cursor button to move to

‘Audio’ and then press ENTER button.

AV SYNC Setup

Video may look slower than the audio if it is connected to a digital TV.

If this occurs, adjust the audio delay time to to match the video.

1

Press the MENU button.

• Setup menu appears.

2 Press Cursor , buttons to move to ‘Audio’ and then press ENTER button.

• 'Audio' menu appears.

GB

3

Press Cursor button to move to

‘DRC’ and then press ENTER button.

4 Press Cursor , to adjust the

‘DRC’.

• When the Cursor button is pressed, the effect is greater, and when the

Cursor button is pressed, the effect is smaller.

3 Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTER button.

• AV-SYNC screen appears.

4

Press Cursor , buttons to select the AV-SYNC Delay

Time and then press the

ENTER button.

• You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

51

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

52

Dolby Pro Logic II Mode

You can select the desired Dolby Pro Logic II audio mode.

Press PL II MODE button.

• Each time the button is pressed, the mode changes as follows.

Note • When selecting Pro Logic II mode, connect your external device to the

AUDIO INPUT jacks (L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.

53

PRO LOGIC II

MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.

CINEMA: Adds realism to the movie soundtrack.

PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left and right speakers.

MATRIX: You will hear 5.1 channel surround sound.

STEREO: Select this to listen to sound from the front left and right speakers and the subwoofer only.

1

Dolby Pro Logic II Effect

This function works only in Dolby Pro Logic MUSIC mode.

Press PL II MODE button to select ‘MUSIC’ mode.

2

Press PL II EFFECT button to select Panorama, then press

Cursor , buttons to select the desired effect setting.

• You can select either 0 or 1.

• This mode extends the front stereo image to include the surround speakers for an exciting

"wraparound" effect with side wall imaging.

GB

3

Press PL II EFFECT button to select C-Width, then press

Cursor , buttons to select the desired effect setting.

• You can select between 0 and 7.

• This sets the width of the center image.

The higher the setting, the less sound comes from the center speaker.

4

Press PL II EFFECT button to select Dimension, then press the Cursor , buttons to select the desired setting.

• You can select between 0 and 6.

• Incrementally adjusts the sound field (DSP)from the front or rear.

Note • When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and (Dolby Pro Logic II) button does not work.

54

Sound Field (DSP)/EQ Function

DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.

EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing

Press DSP/EQ button.

• "DSP" appears on the display panel.

• Each time the button is pressed, the selection changes as follows:

Sleep Timer Function

You can set the time that the DVD player will shut itself off.

Press SLEEP button.

• "SLEEP" will be displayed. Each time the button is pressed the preset time changes as follows: 1 0 20 30 60 90 120 150 OFF.

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

To confirm the sleep timer setting, press SLEEP button.

The remaining time before the DVD player will shut itself off is displayed.

Pressing the button again changes the sleep time from what you have set earlier.

To cancel the sleep timer, press SLEEP button until

OFF appears on the display.

55

Note • DSP/EQ function is only available in STEREO mode.

Press the PL II mode button to show STEREO on the display.

• This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and

Dolby Digital discs.

• When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and DSP/EQ function does not work.

• When the RRSS is activated, you can only select either MOVIE or MUSIC by using the DSP/EQ button.

POP, JAZZ, ROCK: Depending on the genre of music, you can select POP, JAZZ, and ROCK.

STUDIO : Provides a sense of presence as if in a studio.

CLUB : Simulates the sound of a dance club with a throbbing bass beat.

HALL : Provides a clear vocal as if listening in a concert hall.

MOVIE: Provides the feeling of a movie theater.

CHURCH: Gives the feel of being in a grand church.

PASS: Select this for normal listening.

56

GB

Listening to Radio

You can listen to the chosen band (FM,AM broadcast stations) by using either the automatic or manual tuning operation.

Remote Control Unit

1 Press TUNER button.

• The selection toggles back and forth between "FM ➝ AM" each time the TUNER button is pressed.

2 Tune in to the desired station.

Automatic Tuning 1

Automatic Tuning 2

When is pressed, a preset broadcast station is selected.

Press and hold TUNING/CH to automatically search for active broadcasting stations.

Manual Tuning Briefly press TUNING/CH to increase or decrease the frequency incrementally.

Main Unit

1

Press the Function button to select the desired band

( FM, AM ).

2 Select a broadcast station.

Automatic Tuning 1

Press the STOP ( ) button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2

Press the STOP ( ) button to select "MANUAL" and then press and hold button to automatically search the band.

Manual Tuning

Press STOP ( ) to select

MANUAL and then briefly press higher frequency.

to tune in to a lower or

57

Press MO/ST button to listen in Mono/Stereo.

• Each time the button is pressed, the sound switches between "STEREO" and "MONO".

• In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

You can store up to:

• FM 15 FM stations Frequency Modulation

• AM Frequency Modulation

15 AM stations

Example: Presetting FM 89.1 in the memory

1 Press the TUNER button and select the FM band.

• Each time the button is pressed, the band switches between

" FM ➝ AM ".

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

2

Press TUNING/CH to select "89.10".

• Refer to Step 2 on page 57 to automatically or manually tune in to a station.

TITLE RDS RT ST TUNED kHz

MHz

3

Press the TUNER

MEMORY button.

• “PRGM” flashes in the display.

TITLE RDS RT ST TUNED kHz

MHz

GB

4 Press to select preset number.

• You can select between 1 and

15.

TITLE RDS RT ST TUNED kHz

MHz

5 Press the TUNER

MEMORY button again.

• Press the TUNER MEMORY button before

‘PRGM’ disappears from the display.

• ‘PRGM’ disappears from the display and the station is stored in memory.

6 To preset another station, repeat steps 2 to 5.

TITLE CHAP RDS RT ST TUNED kHz

MHz

To tune in to a preset station, press on the remote control to select a channel.

58

Operating a TV with the Remote Control

When operating a TV with the remote control

1 Press the MODE button to make the TV indicator on the remote control flash.

TV DVD RECEIVER

2

Press POWER button to turn on the TV.

3

Point the remote control toward the TV.

4 While holding down POWER , enter the code corresponding to your brand of TV.

• If the code matches the TV's code, the TV will be turned off.

• If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.

Example: For a Samsung TV

While holding down POWER , use the number buttons to enter 00,

01, 02, 03, 04, and 05.

5 Point the remote control toward the TV and press POWER . If the TV turns off or on, the setting is complete.

• You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).

Note

• The remote control may not work on some brands of TVs. Also some operations may not be possible depending on your brand of TV.

• If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default.

59

TV Brand Code List

No.

21

22

23

24

17

18

19

20

25

26

27

28

29

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

Brand

SAMSUNG

GRUNDIG

ZENITH

MIVAL

NOBLEX

EMERSON

MAGNAVOX

LOEWE

THOMSON

NORDMENDE

LOEWE OPTA

BLAUPUNKT

SIEMENS

ANAM

DAEWOO

LG

HITACHI

JVC

SHARP

SONY

TOSHIBA

SANYO

MITSUBISHI

MATSUSHITA

TELEFUNKEN

RCA

PANASONIC

SABA

PHILIPS

Code

00(Initial Value), 01, 02, 03, 04, 05, 73

No.

30

06~11, 59

12~18, 20, 21

05, 20, 21, 22, 53

23, 40, 41, 49

24, 55

27, 33, 34, 35, 54

27, 36

27, 37, 42, 43, 44, 46

27, 30, 31, 32

05, 27, 28

09, 26

41, 49, 51, 57

29, 61

07, 09, 26, 48, 49, 50

40, 41, 47, 48, 49

05, 45, 47, 64, 65, 66, 67, 68, 69

39, 42, 46, 70, 71, 72

38

52

56

19

25

05, 60

40, 41, 49, 62, 63

40, 41, 49

36, 47, 05

39

39

51

52

53

54

47

48

49

50

55

56

57

43

44

45

46

39

40

41

42

35

36

37

38

31

32

33

34

Brand

BRANDT

FERGUSON

PIONEER

TELEAVA

FINLUX

FISHER

AKAI

YOKO

PHONOLA

RADIOLA

SCHNEIDER

NEWSAN

CONTINENTAL EDISON

SALORA

SELECO

NOKIA

REX

MIVAR

IMPERIAL

CGE

BANG & OLUFSEN

BRIONVEGA

FORMENTI

METZ

WEGA

RADIOMARELLI

SINGER

SINUDYNE

Code

41

47

47

47

47

46

46

46

47

47

47

47

48

48

48

48

05, 45

05

58

49

41

41, 48, 74

41

05, 42, 47

31

31

05

05, 45, 47

60

GB

Adjusting Display Brightness

You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.

Press DIMMER button.

• Each time the button is press, the brightness changes as follows:

DARK BRIGHT.

Mute Function

This is useful when answering a doorbell or telephone call.

Press MUTE button.

• ‘MUTE’ flash in the display.

• To switch the sound back on (at the same volume as before), press MUTE again or the VOLUME buttons.

TITLE CHAP PRGM RDS RT ST TUNED kHz

MHz

61

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause skipping.

Be especially careful not to scratch discs when handling them.

GB

Handling discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Disc Storage

Do not keep in direct sunlight

Keep in a cool ventilated area

Keep in a clean

Protection jacket.

Store vertically.

Caution • Do not allow the discs to become contaminated with dirt.

• Do not load cracked or scratched discs.

Handling and Storing Discs

When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

• When cleaning, wipe gently from the inside to the outside of the disc.

Note

• Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.

62

Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom Check/Remedy

Disc tray does not open.

Playback does not start.

Playback does not start immediately when the

Play/Pause button is

Sound is not produced.

Sound can be heard only from a few speakers and not all six.

Picture does not appear, sound is not produced, or the disc tray opens 2 to 5 seconds later.

• Is the power cord plugged securely into the outlet?

• Turn off the power and then turn it back on.

• Check the region number of the DVD.

DVD discs purchased from abroad may not be playable.

• CD-ROMs and DVD-ROMs cannot be played on this DVD player.

• Make sure that the rating level is correct.

• Are you using a deformed disc or a disc with scratches on the surface?

• Wipe the disc clean.

• No sound is heard during fast playback, slow playback, and step motion playback.

• Are the speakers connected properly? Is the speaker setup correctly customized?

• Is the disc severely damaged?

• When listening to a CD or radio, sound is output to the front speakers (L/R) only. Select "PRO LOGIC II" by pressing

(Dolby Pro Logic II) on the remote control to use all six speakers.

• Make sure that the DVD disc is 5.1-CH compatible.

• If you set C, SL, and SR to NONE in the speaker mode in the audio setup of the setup screen, no sound is heard from the center speaker and the front left and right speakers. Set C, SL, and SR to SMALL.

• Was the DVD player suddenly moved from a cold place to a warm one? When condensation forms inside the player, remove the disc and let the player stand for 1 or 2 hours with the power on. (You can use the player again after condensation disappears.)

Dolby Digital 5.1 CH

Surround Sound is not produced.

• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1

CH Surround Sound is produced only if the disc is recorded with

5.1 channel sound.

• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in the information display?

63

Symptom Check/Remedy

• Disc is rotating but no picture is produced.

• Picture quality is poor and picture is shaking.

• Is the TV power on?

• Are the video cables connected properly?

• Is the disc dirty or damaged?

• A poorly manufactured disc may not be playable.

The remote control does not work.

• Is the remote control being operated within its operation range of angle and distance?

• Are the batteries exhausted?

Audio language and subtitles do not work.

Menu screen does not appear even when the menu function is selected.

Aspect ratio cannot be changed.

Can't receive radio broadcast.

• The main unit is not working.

(Example: The power goes out or strange noise is heard.)

• The DVD player is not working normally.

The password for rating level has been forgotten.

• Audio language and subtitles will not work for DVDs not containing them. And depending on the disc, they may work differently.

• Are you using a disc that does not contain menus?

• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function.

• Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area with good reception.

• Turn off the power and hold the button on the main unit for longer than 5 seconds.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

• While “NO DISC” message appears on the display of main unit, hold the main unit's button for longer than 5 seconds. “INITIALIZE” appears on the display and all settings will return to the default values.

• Press the POWER button.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

64

GB

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 37).

Language Code

Bhutani

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faeroese

French

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

1217

1226

1229

Bulgarian 1233

Bihari 1235

1181

1183

1186

1194

1196

1203

1209

Bislama 1239

Bengali; Bangla 1245

Tibetan 1248

Breton 1253

Catalan 1254

Corsican 1257

Czech

Welsh

1261

1269

Danish

German

1283

1287

1305

1307

1311

1313

1326

1327

1332

1297

1298

1299

1300

1301

Code

1093

1097

1103

1105

1109

1069

1066

1067

1070

1079

1052

1053

1057

1059

1060

1027

1028

1032

1039

1044

1045

1051

1150

1151

1157

1165

1166

1171

1174

1130

1142

1144

1145

1149

Language Code

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

1491

1495

1498

Latin 1501

Lingala 1502

Laothian 1503

Lithuanian 1505

1463

1481

1482

1483

1489

1408

1417

1428

1435

1436

1369

1376

1379

1393

1403

1356

1357

1358

1363

1365

1334

1345

1347

1349

1350

1352

1353

Language Code

Latvian, Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Polish

1532

1534

1535

Pashto, Pushto 1538

Portuguese 1539

1525

1527

1528

1529

1531

1514

1515

1516

1517

1521

1506

1507

1508

1509

1511

1512

1513

Quechua 1540

Rhaeto-Romance 1543

Kirundi 1557

Romanian

Russian

1564

1572

Kinyarwanda

Sanskrit

Sindhi

Sangro

Serbo-Croatian

Singhalese

Slovak

1581

1587

1613

1632

1665

1684

1697

Language

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Tegulu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese

Zulu

65

Specifications

E

A

K

S

P

E

R

A

M

P

L

I

E

R

F

I

F

M

R

A

L

G

E

N

E

T

U

N

E

R

Power Consumption

Weight

Dimensions (W x H x D)

Operating Temperature Range

Operating Humidity Range

Usable Sensitivity

S/N Ratio

Distortion

AM

T

U

N

E

R

Usable Sensitivity

S/N Ratio

Distortion

Composite Video

VIDEO

OUTPUT

Component Video

Front speaker output

Center speaker output

Rear speaker output

Subwoofer speaker output

Frequency range

S/N Ratio

Channel separation

Input sensitivity

Speaker system

Impedance

Frequency range

Output sound pressure level

Rated input

Maximum input

Dimensions (W x H x D)

Weights

70W

3.2Kg

430 x 60 x 340 mm

+5°C~+35°C

10%~75%

10dB

60dB

0.5%

54dB

40dB

2%

1.0Vp-p(75Ω load)

Y:1.0Vp-p(75Ω load)

Pr:0.70Vp-p(75Ω load)

Pb:0.70Vp-p(75Ω load)

32W(4Ω)/CH

63W(4Ω)

32W(4Ω)/CH

64W(8Ω)

20Hz~20kHz

75dB

50dB

(AUX)500mV

Front/Rear speaker

4Ω x 4

150Hz~20kHz

85dB/W/M

32W

64W

85 x 100 x 95 mm

0.48 Kg

5.1ch speaker system

Center speaker

4Ω

150Hz~20kHz

85dB/W/M

63W

126W

140 x 95 x 68 mm

0.29 Kg

Subwoofer speaker

8Ω

30Hz~150Hz

86dB/W/M

64W

128W

130 x 320 x 300 mm

3.95 Kg

66

GB

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • DVD player
  • 255 W 5.1 channels
  • Dolby Digital, dts
  • Equalizer

Related manuals

Download PDF

advertisement

Table of contents