STMicroelectronics SN260Q Datasheet

STMicroelectronics SN260Q Datasheet
SN260
ZigBee 802.15.4 transceiver and ZNet networking
Data Brief
Features
■
Complete network processor plus radio
containing a complete Zigbee implementation
up to the network layer
■
Simple SPI-slave or UART interface to an
application microcontroller, providing the full
serialized ZNet interface
■
Flexible Antenna Interface allows easy
antenna connection with or without external PA
■
Excellent noise immunity to 802.11
background; exceeds 802.15.4
adjacent/alternate channel rejection
specification for improved co-existence
■
Digital RSSI / 802.15.4 Link Quality Indication
■
Hardware supported network level debugging
■
Hardware Encryption Engine (AES 128) with
true Random Number Generator
■
Integrated sleep oscillator allows a single
crystal design, reducing cost and power
consumption
■
Fully compatible with Ember’s EM260
The SN260 is designed to provide customers the
flexibility of choosing their own microcontroller to
run their application, while interfacing to the
SN260 to provide all the ZigBee functionality. This
flexibility allows customers to ZigBee-enable
existing products very rapidly using toolchains
that they are familiar with.
Description
The SN260 integrates an industry-proven network
processor which is preloaded with ZNet, the
ZigBee-compliant software stack codeveloped by
Ember and STMicroelectronics.
The SN260 is a network processor chip that has
been designed for low power, low cost, mesh
networking industry standards-based protocol —
ZigBee.
Order Codes
Operating
Temperature
Package
Packing
Marking
SN260Q
-40 to +85°C
QFN40
Tray
SN260
SN260QT
-40 to +85°C
QFN40
Tape & Reel
SN260
Part Number
July 2006
Rev. 1
For further information contact your local STMicroelectronics sales office.
1/2
www.st.com
2
SN260
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement