SONY XR-C5090, XR-C340 cassette car stereo, RM-X4S remote commander Service manual
Below you will find brief information for cassette car stereo XR-C5090, remote commander RM-X4S, cassette car stereo XR-C340. The XR-C5090 is a FM/AM cassette car stereo with a built-in power amplifier. It has a 4-track 2-channel stereo tape deck, and can play music from cassette tapes, radio stations, and external audio sources. You can control it using the front panel buttons or the remote commander. The remote commander (RM-X4S) is used to control the volume, source, and other functions of the cassette car stereo.
Advertisement
Advertisement
SERVICE MANUAL
XR-C5090
E Model
Refer to RM-X4S SERVICE MANUAL (9-925-698-
∏
) issued previously for information of remote commander (RM-X4S) supplied with this set
Model Name Using Similar Mechanism
Tape Transport Mechanism Type
SPECIFICATIONS
XR-C340
MG-25F-136
MICROFILM
FM/AM CASSETTE CAR STEREO
TABLE OF CONTENTS
1.
GENERAL
Location of Controls ....................................................... 3
Setting the Unit ............................................................... 4
Detaching the Front Panel ............................................... 4
Preparing the Rotary Commander .................................. 4
Setting the Clock ............................................................. 4
Installation ....................................................................... 5
Connection ...................................................................... 7
2.
DISASSEMBLY
......................................................... 9
3.
ASSEMBLY OF MECHANISM DECK
........... 11
4.
MECHANICAL ADJUSTMENTS
....................... 14
5.
ELECTRICAL ADJUSTMENTS
Tape Deck Section .......................................................... 14
Tuner Section .................................................................. 14
6.
DIAGRAMS
6-1. IC Pin Function Description ........................................... 15
6-2. Printed Wiring Boards – MAIN Section – .................... 19
6-3. Schematic Diagram – MAIN Section – .......................... 21
6-4. Printed Wiring Board – PANEL Section – .................... 25
6-5. Schematic Diagram – PANEL Section – ....................... 27
7.
EXPLODED VIEWS
................................................ 31
8.
ELECTRICAL PARTS LIST
............................... 34
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C during repairing.
• Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged by heat.
– 2 –
SECTION 1
GENERAL
This section is extracted from instruction manual.
– 3 –
– 5 –
– 6 –
– 7 –
– 8 –
SECTION 2
DISASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
FRONT PANEL ASS’Y, COLLAR
4 collar
3 claw
1
Push the button
(release).
A
2
Remove the front panel ass’y to the direction of the arrow
A
.
COVER ASS’Y
2
1
3 claw
3 cover ass’y
2
1
– 9 –
SUB PANEL, MECHANISM DECK (MG-25F-136)
3 connector
(CN351)
5 screw
(PTT2.6
×
6)
6 mechanism deck
(MG-25F-136)
4 flexible flat cable
(CN301)
2 sub panel
1 three screws
(PTT2.6
×
8)
1 three screws
(PTT2.6
×
8)
MAIN BOARD, HEAT SINK
3 two ground point screws
4 main board
5 three screws
(PTT2.6
×
8)
5 two screws
(PTT2.6
×
10)
1 screw
(PTT2.6
×
8)
5 two screws
(PTT2.6
×
8)
6 heat sink
2 rubber cap (25)
1 two screws
(PTT2.6
×
8)
– 10 –
SECTION 3
ASSEMBLY OF MECHANISM DECK
Note:
Follow the assembly procedure in the numerical order given.
HOUSING
2
Install the hanger onto two claws of the housing.
4
Fit claw on
B
part.
5
Fit projection on
C
part.
7
Holder the hanger by bending the claw.
1
Install the catch to the hanger. hanger
3
Put the housing under
A
part.
6
Fit projection on
D
part.
housing
C
part
8
Hold the hanger by bending the claw.
D
part
A
part
B
part
ARM (SUCTION)
2
Move the arm (suction) in the arrow direction and fit on projection.
projection
1
Fit the arm (suction) on the shaft.
– 11 –
LEVER (LDG-A) / (LDG-B)
shaft
A shaft
B shaft
C shaft
A shaft
B
1
Fit the lever (LDG-A) on shafts
A
–
C
and install it.
3
type-E stop ring 2.0
2
Fit the lever (LDG-B) on shafts
A
and
B
and install it.
GEAR (LDG-FT)
gear (LDG-D) hole hole lever (LDG-A) gear (LDG-FB)
4
Align hole in the gear (LDG-D) with hole the lever (LDG-A)
5
gear (LDG-FT)
6
polyethylene washer
2
tension spring (LD-2)
1
2
tension spring (LD-1)
– 12 –
3
Move the lever (LDG-B) in the arrow direction.
GUIDE (C)
2
guide (C)
1
three claws
– 13 –
SECTION 4
MECHANICAL ADJUSTMENTS
1. Clean the following parts with a denatured-alcohol-moistened swab: playback head pinch roller rubber belt idler capstan
2. Demagnetize the playback head with a head demagnetizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the parts adjusted.
5. The adjustments should be performed with the power supply voltage unless otherwise noted.
•
Torque Measurement
Mode Torque Meter
CQ-102C Forward
Forward
Back Tension
Reverse
CQ-102C
CQ-102RC
Reverse
Back Tension
FF, REW
CQ-102RC
CQ-201B
Meter Reading
30 - 65 g•cm
(0.42 - 0.90 oz•inch)
0.5 - 4.5g•cm
(0.01 - 0.06 oz•inch)
30 - 65 g•cm
(0.42 - 0.90 oz•inch)
0.5 - 4.5g•cm
(0.01 - 0.06 oz•inch)
60 - 200 g•cm
(0.83 - 2.78 oz•inch)
•
Tape Tension Measurement
Mode Tension Meter
Forward CQ-403A
Reverse CQ-403R
Meter Reading more than 90 g
(more than 3.18 oz) more than 90 g
(more than 3.18 oz)
SECTION 5
ELECTRICAL ADJUSTMENTS
TAPE DECK SECTION
Tape Speed Adjustment
Setting:
0 dB=0.775 V test tape
WS-48A
(3 kHz, 0 dB) speed checker or frequency counter
4
Ω set speaker out terminal
– +
Procedure:
1. Put the set into the FWD PB mode.
2. Adjust adjustment resistor for inside capstan motor so that the reading on the speed checker or frequency counter becomes in specification.
Specification: Constant speed
Speed checker
–1.5 to +2.5%
Frequency counter
2,955 to 3,075 Hz
Adjustment Location:
– SET UPPER VIEW –
Tape Speed Adjustment
TUNER SECTION
Tuner section is no adjustment.
– 14 –
SECTION 6
DIAGRAMS
6-1.
IC PIN FUNCTION DESCRIPTION
•
MAIN BOARD IC501
µ
PD17708GC-567-3B9 (SYSTEM CONTROLLER)
Pin No.
1
2
3
4
5
6
7
8
9
22
23
24
25
35
36
37
32
33
34
38
39
40
29
30
31
26
27
28
19
20
21
16
17
18
13
14
15
10
11
12
Pin Name
AMSSEL
POS3
POS2
POS0
POS1
TAPEON
CM ON
LM LOD
LM EJ
RC IN0
VSM
AMIFIN
FMIFIN
VDD2
FM OSC
AM OSC
GND
NCO
EO1
TEST0
NCO
SEKOUT
MW/SW
BEEP
TUNON
FM ON
PW ON
MUT
VOLCE
VOLCKO
VOLSO
AMPON
AMPMUT
DX/LO
AM MONO
GND
DSTSEL
DBASIN
KEYIN1
KEYIN0
I
I
O
O
I/O
I
I
I
Function
Setting terminal for the AMS selection fixed at “L”
Tape position detect input from tape operation switch on the mechanism block
O
O
Tape system power supply on/off control signal output terminal “H”: tape on
Capstan/reel motor (M901) drive signal output terminal “H”: motor on
Loading/tape operation motor control signal output to the LB1638M (IC351)
(For the loading direction and forward side operation) *1
Loading/tape operation motor control signal output to the LB1638M (IC351)
(For the eject direction and reverse side operation) *1
O
O
O
O
O
O
I
I
I
I
Tuner system power supply on/off control signal output to the BA3918 (IC611) “H”: tuner on
FM system power supply on/off control signal output to the BA3918 (IC611) “H”: FM on
Main system power supply on/off control signal output to the BA3918 (IC611) “H”: power on
Line muting control signal output terminal “H”: line muting on
Chip enable signal output to the electrical volume (IC331)
Serial data transfer clock signal output to the electrical volume (IC331)
O
O
O
Serial data output to the electrical volume (IC331)
Standby control signal output to the power amplifier (IC751) “L”: standby
Muting control signal output to the power amplifier (IC751) “L”: muting on
O
O
Local/DX selection signal output to the FM/AM tuner unit (TU1) “L”: DX, “H”: local
AM forced monaural signal output terminal Not used (open)
— Ground terminal
Destination setting terminal (frequency select switch (S502) input terminal)
“L”: AM 9k step or FM 50k step, “H”: AM 10k step or FM 200k step
D-BASS switch (SW951) input (A/D input)
Key input terminal (A/D input)
6, INTRO 1, REPEAT 2, SHUF 3, BL SKIP 6, ATA 5, 4, PRESET DISC +/– keys input
(LSW921 to LSW927, LSW929 and LSW930)
Key input terminal (A/D input)
OFF, SOURCE, MODE
*, + ) + SEEK AMS, – = 0 SEEK AMS, VOLUME –,
SEL, VOLUME +, ATT , DSPL, BTM, LCL keys input (LSW901 to LSW912)
O
O
O
I
I
I
Rotary remote commander shift key A/D input terminal
FM and AM signal meter voltage detection input from the FM/AM tuner unit (TU1)
AM intermediate frequency detection signal input from the FM/AM tuner unit (TU1)
I FM intermediate frequency detection signal input from the FM/AM tuner unit (TU1)
— Power supply terminal (+5V)
I FM local oscillator detection signal input from the FM/AM tuner unit (TU1)
O
I
O
I AM local oscillator detection signal input from the FM/AM tuner unit (TU1)
— Ground terminal
O Not used (open)
Main charge-pump control signal output terminal
Setting terminal for the test (fixed at “L”)
Not used (open)
Seek control signal output to the FM/AM tuner unit (TU1)
MW/SW selection signal output to the FM/AM tuner unit (TU1) “L”: MW, “H”: SW
Beep sound output terminal
– 15 –
51
52
53
54
55
56
57
58
59
63
64
65
60
61
62
66
67
68
69
Pin No.
41
42
43
44
45
46
47
48
49
50
Pin Name
KEYACK
BU IN
MTLSEL
DOLON
AMSIN
ST
AMS ON
N/R OUT
TAPMUT
ILLON
SD IN
NOSESW
TELMUT
REL T
ACCIN
TESTIN
RC IN1
PW SEL
MTLIN
ADON
KEYSEL
SEKOUTSEL
COLORSEL
LCDCE
LCDCKO
LCDSO
LCDINH
UNICKI
UNISO
I/O
I
I
I/O
Function
Input of acknowledge signal for the key entry Acknowledge signal is input to accept function and eject keys in the power off status On at input of “H”
Battery detect signal input terminal “H”: battery on
METAL control in/out terminal
At initial mode: auto/manual mode selection input of METAL function “L”: manual mode
At manual mode: METAL on/off control signal output terminal (“H” output: METAL on)
At auto mode: input at MTLIN (pin %ª)
Not used this function in this set (fixed at “H”)
I/O
Dolby control in/out terminal
At initial mode: valid/invalid selection input of dolby function (“L” input: valid)
At normal mode: dolby on/off control signal output (“H” output : dolby on)
Not used this function in this set (fixed at “H”)
I
I/O
Whether a music is present or not from CXA2509AQ (IC301) is detected at auto music sensor
“L”: music is present, “H”: music is not present
Input of FM stereo detection signal from FM/AM tuner unit (TU1), and output of forced monaural control signal to FM/AM tuner unit (TU1) (Commonly used for stereo display input and forced monaural output)
FM stereo detection at input of “L”, forced monaural at output of “L”
O
O
Tape auto music sensor control signal output to the CXA2509AQ (IC301)
“L” is output to lower the gain for audio level at FF/REW
Forward/reverse direction control signal output to the CXA2509AQ (IC301)
“L: forward direction, “H”: reverse direction
O Tape muting on/off control signal output to the CXA2509AQ (IC301) “H”: tape muting on
O
Power supply on/off control signal output terminal at the illumination and liquid crystal display driver (IC901) “H”: power on
At power select switch (S501) on mode: “H” output at the accessory on
At power select switch (S501) off mode: “H” output at the power on
I
I
I
I
I
I
I
I
I
Station detector detect input from the FM/AM tuner unit (TU1)
Stop level for SEEK, BTM, etc. is determined SD is present at input of “H”
Detects the removal of the attaching and removing type front panel block “L”: attaching
Telephone muting signal input terminal At input of “L”, the signal is attenuated by –20 dB
Reel table rotation detect signal input from the take-up and supply reel sensor
Accessory detect signal input terminal “L”: accessory on
Setting terminal for the test mode “L”: test mode (normally fixed at “H”)
Rotary remote commander shift key A/D input terminal
Power select switch (S501) input terminal
“L”: position A (halt mode), “H”: position B (operation mode)
Input terminal to set whether the auto metal function is present or not
“L”: auto metal function is present (fixed at “H”)
O Power supply on/off control signal output for the A/D conversion
I Setting terminal for the key (fixed at “H”)
I Active selection terminal for the SEKOUT (pin #•) (fixed at “H”)
I Setting terminal for the illumination color “L”: amber, “H”: green (fixed at “H”)
O Chip enable output to the liquid crystal display driver (IC901)
O Serial data transfer clock signal output to the liquid crystal display driver (IC901)
O Serial data output to the liquid crystal display driver (IC901)
O
Blank indicate control signal output to the liquid crystal display driver (IC901)
“L”: no display
I Serial data reading clock signal input terminal (for SONY bus)
O Serial data output to the bus interface (IC581) (for SONY bus)
– 16 –
Pin No.
70
71
72
76
77
78
73
74
75
79
80
Pin Name
UNISI
UNICKO
BUSON
SYSRST
VREG
GND
X OUT
X IN
CE
VDD1
RESET
I/O Function
I Serial data input from the bus interface (IC581) (for SONY bus)
O Serial data transfer clock signal output to the bus interface (IC581) (for SONY bus)
O Bus on/off control signal output to the bus interface (IC581) (for SONY bus) “L”: bus on
O Reset signal output to the bus interface (IC581) (for SONY bus) “L”: reset
O CPU regulator output terminal Connected to capacitor
— Ground terminal
O Main system clock output terminal (4.5 MHz)
I Main system clock input terminal (4.5 MHz)
I CPU chip enable signal input (fixed at “H”)
— Power supply terminal (+5V)
I
System reset signal input from the reset signal generator (IC551) and reset switch (S551)
“L” is input for several 100 msec after power on, then it changes to “H”
*1 loading/tape operation motor control
MODE
TERMINAL
LM LOD (pin 8)
LM EJ (pin 9)
STOP
“L”
“L”
LOADING/
FORWARD
“H”
“L”
EJECT/
REVERSE
“L”
“H”
BRAKE
“H”
“H”
– 17 –
6-2.
PRINTED WIRING BOARD – MAIN Section –
– 19 – – 20 –
– 24 –
• Waveform
1
IC501
&¶
(X_IN)
3.4 Vp-p
221 ns
• IC Block Diagrams – MAIN Board –
IC301 CXA2509AQ-T4
PBFB1
PBRIN1
31
32
PBREF1
33
PBFIN1
34
VCT
PBGND
35
36
PBFIN2 37
PBREF2 38
PBRIN2
PBFB2
39
40
30
VCT
29 28 27 26
120
µ
/70
µ
T2
– +
F2
F1
X1
+
X1
25
NR BIAS
TAPE/AUX
TAPE EQ
LPF
FWD/RVS
VCC
+
–
F3
24 23 22 21
24dB
+ –
MS
MODE
20
19
18
17
16
MSMODE
DRSW
TAPESW
INSW
NC
MS ON/
OFF
DETECT
15 NC
14 MSOUT
13 DGND
12 MSTC
11 G1FB
1
– +
120
µ
/70
µ
2 3 4 5
T1
+
–
6
OFF/B
7
24dB
8 9 10
IC331 LC75373ED
LSELO
L4
L3
L2
L1
34
35
36
37
38
VDD 39
R1
R2
R3
R4
RSELO
40
41
42
43
44
33
1
+
–
–
+
+
–
–
+
32
2
–
+
+
–
31 30 29 28 27 26 25 24 23
+
+
–
–
3 4 5
–
+
+
–
–
+
+
–
+
–
22 LFIN
21 LFOUT
20
LROUT
–
+
DECODER
+
–
LATCH
SHIFT
REGISTER
CONTROL
–
+
–
+
+
–
19 VREF
18
17
16
15
14
CE
DI
CL
VSS
RROUT
13
12
RFOUT
RFIN
6 7 8 9 10 11
– 29 –
– 30 –
NOTE:
• -XX and -X mean standardized parts, so they may have some difference from the original one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑ ↑
Parts Color Cabinet's Color
SECTION 7
EXPLODED VIEWS
• Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not supplied.
• Hardware (# mark) list and accessories and packing materials are given in the last of the electrical parts list.
(1) CHASSIS SECTION
8
not supplied
14 15
MG-25F-136
#3
F781
9
6
7
10
#2
#4
#2
11
#2
4
5
3
2
12
#2
1
13
#1
#2
#2
Front panel ass’y
16
3
4
1
2
* 5
Ref. No.
Part No.
Description
3-018-383-01 PANEL, SUB
3-935-003-01 SPRING, TORSION
3-932-205-61 DOOR, CASSETTE
X-3367-636-1 LOCK ASSY
3-010-377-01 INSULATOR
* 6
7
* 8
9
A-3313-436-A MAIN BOARD, COMPLETE
3-915-923-01 SCREW, GROUND POINT
X-3373-270-1 COVER ASSY
1-776-207-81 CORD (WITH CONNECTOR) (POWER)
Remark
Ref. No.
Part No.
* 10
* 11
12
* 13
14
Description
3-018-390-01 BRACKET (IC)
3-018-389-01 HEAT SINK
3-935-014-01 CUSHION (U)
3-009-813-01 CHASSIS
3-012-859-01 CAP (25), RUBBER
15
16
F781
Remark
3-937-650-01 PLATE (C), GROUND
3-018-384-01 COLLAR
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10A)
– 31 –
(2) FRONT PANEL SECTION
not supplied
(KEY board)
65
#5
#5
54
55
56
57
58
52
53
51
59
60
LCD901
61
62
63
64
Ref. No.
51
* 52
53
54
55
56
57
58
Part No.
Description
3-018-930-01 KNOB (D-BASS)
3-014-859-01 SHEET (LCD) (T)
3-010-398-01 BUTTON (RELEASE)
3-010-395-01 SPRING (RELEASE)
X-3374-697-1 PANEL SUB ASSY
Remark Ref. No.
Part No.
59
60
* 61
* 62
* 63
Description Remark
3-010-387-01 BUTTON (PRESET) ( 6. 1. 2. 3. 4. 5. 6. DSPL)
3-010-391-01 BUTTON (L.D) (LCL. –. DISC. +)
3-010-375-01 SHEET (REFLECTOR)
3-018-385-01 PLATE (LCD), LIGHT GUIDE
3-018-386-01 HOLDER (LCD)
3-010-383-01 BUTTON (SOURCE)
3-010-384-01 BUTTON (M.O.S)
(MODE. OFF. – = 0. SEEK AMS. + ) +)
3-010-386-11 BUTTON (B.M.+/–) (–. SEL. +. ATT. BTM)
64 3-010-382-01 PANEL, FRONT BACK
* 65
3-015-036-01 CUSHION (BACK PANEL)
LCD901 1-801-967-51 DISPLAY PANEL, LIQUID CRYSTAL
– 32 –
(3) MECHANISM DECK SECTION
(MG-25F-136)
160
159
154
155
#6
158
157
156
A
A
161
162
164
153
152
168
165
168
#7
166
167
163
HP901
M901
151
Ref. No.
Part No.
151
* 152
* 153
154
155
Description
A-3291-667-A CLUTCH (FR) ASSY
3-019-130-01 LEVER (LDG-A)
3-019-131-01 LEVER (LDG-B)
3-020-539-01 SPRING (LD-1), TENSION
3-020-540-01 SPRING (LD-2), TENSION
156
157
158
* 159
160
3-020-542-01 GEAR (LOADING FT)
3-341-753-11 WASHER, POLYETHYLENE
3-020-533-01 HOUSING
3-020-532-01 ARM (SUCTION)
3-020-534-01 HANGER
Remark Ref. No.
Part No.
161
162
163
164
165
Description
3-933-346-01 CATCHER
3-933-344-01 GUIDE (C)
3-014-798-01 SCREW (HEAD), SPECIAL
3-364-151-01 WASHER
A-3301-267-A CHASSIS ASSY (G)
166
167
3-017-302-01 BELT (25)
3-936-853-01 FLYWHEEL (F)
168 3-701-437-21 WASHER
HP901 1-500-157-21 HEAD, MAGNETIC (PLAYBACK)
M901 A-3291-665-A MOTOR ASSY, MAIN (CAPSTAN/REEL)
Remark
– 33 –
KEY
SECTION 8
ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set.
• -XX and -X mean standardized parts, so they may have some difference from the original one.
• RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• SEMICONDUCTORS
In each case, u: µ, for example: uA. .
: µA. .
uPA. . : µPA. .
uPB. . : µPB. .
uPD. . : µPD. .
uPC. . : µPC. .
• CAPACITORS uF: µF
• COILS uH: µH
When indicating parts by reference number, please include the board.
*
*
*
*
Ref. No.
Part No.
Description
KEY BOARD
**********
3-010-375-01 SHEET (REFLECTOR)
3-014-857-01 SHEET (LCD) (T)
3-018-385-01 PLATE (LCD), LIGHT GUIDE
3-018-386-01 HOLDER (LCD)
< CAPACITOR >
C901 1-163-033-00 CERAMIC CHIP 0.022uF
C902 1-165-319-11 CERAMIC CHIP 0.1uF
C903 1-165-319-11 CERAMIC CHIP 0.1uF
C904 1-163-137-00 CERAMIC CHIP 680PF 5%
< CONNECTOR >
CNP901 1-764-423-11 PIN, CONNECTOR 12P
< DIODE >
D901 8-719-420-90 DIODE MA8051-M
D902 8-719-422-64 DIODE MA8062-M
D903 8-719-422-64 DIODE MA8062-M
D904 8-719-422-64 DIODE MA8062-M
D905 8-719-422-64 DIODE MA8062-M
< IC >
IC901 8-759-443-68 IC LC75834JED
Remark
50V
50V
50V
50V
< CHIP CONDUCTOR >
JC901 1-216-295-00 SHORT 0
JC902 1-216-295-00 SHORT 0
JC951 1-216-296-00 SHORT 0
JC952 1-216-296-00 SHORT 0
< LIQUID CRYSTAL DISPLAY >
LCD901 1-801-967-51 DISPLAY PANEL, LIQUID CRYSTAL
< SWITCH >
LSW901 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(OFF)
LSW902 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(SOURCE)
LSW903 1-762-619-11 SWITCH, KEY BOARD (WITH LED)
(MODE *)
LSW904 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(+ ) +)
LSW905 1-762-619-11 SWITCH, KEY BOARD (WITH LED)( = 0 -)
LSW906 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(-)
LSW907 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(SEL)
LSW908 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(+)
Ref. No.
Part No.
Description Remark
LSW909 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(ATT)
LSW910 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(DSPL)
LSW911 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(BTM)
LSW912 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(LCL)
LSW921 1-762-619-11 SWITCH, KEY BOARD (WITH LED)( 6)
LSW922 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(1/INTRO)
LSW923 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(2/REPEAT)
LSW924 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(3/SHUF)
LSW925 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(6/BL SKIP)
LSW926 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(5/ATA)
LSW927 1-762-619-11 SWITCH, KEY BOARD (WITH LED)(4)
LSW929 1-762-619-11 SWITCH, KEY BOARD (WITH LED)
(DISC/PRESET +)
LSW930 1-762-619-11 SWITCH, KEY BOARD (WITH LED)
(DISC/PRESET -)
< PILOT LAMP >
PL901 1-517-633-21 LAMP, PILOT (LCD BACK LIGHT)
PL902 1-517-633-21 LAMP, PILOT (LCD BACK LIGHT)
< RESISTOR >
R901 1-216-647-11 METAL CHIP
R902 1-216-647-11 METAL CHIP
R903 1-216-647-11 METAL CHIP
R904 1-216-651-11 METAL CHIP
R905 1-216-655-11 METAL CHIP
R906 1-216-655-11 METAL CHIP
R907 1-216-659-11 METAL CHIP
R908 1-216-663-11 METAL CHIP
R909 1-216-667-11 METAL CHIP
R910 1-216-671-11 METAL CHIP
R911 1-208-806-11 RES,CHIP
R921 1-216-647-11 METAL CHIP
R922 1-216-647-11 METAL CHIP
R923 1-216-647-11 METAL CHIP
R924 1-216-651-11 METAL CHIP
R925 1-216-655-11 METAL CHIP
R926 1-216-655-11 METAL CHIP
R927 1-216-659-11 METAL CHIP
R928 1-216-663-11 METAL CHIP
R929 1-216-667-11 METAL CHIP
R951 1-216-190-00 RES,CHIP
R952 1-216-089-00 RES,CHIP
R953 1-216-049-11 RES,CHIP
R954 1-216-049-11 RES,CHIP
680
680
680
1K
1.5K
1.5K
2.2K
3.3K
4.7K
6.8K
10K
680
680
680
1K
1.5K
1.5K
2.2K
3.3K
4.7K
470
47K
1K
1K
5%
5%
5%
5%
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
2% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
1/8W
1/10W
1/10W
1/10W
– 34 –
KEY MAIN
C17
C18
C19
C22
C23
C11
C12
C13
C14
C16
C6
C7
C8
C9
C10
C1
C2
C3
C4
C5
Ref. No.
R955
R956
R961
R962
R963
R964
Part No.
Description
1-216-049-11 RES,CHIP
1-216-049-11 RES,CHIP
1-216-027-00 METAL CHIP
1-216-025-00 RES,CHIP
1-216-025-00 RES,CHIP
1-216-035-00 METAL CHIP
R965 1-216-035-00 METAL CHIP
R966 1-216-033-00 METAL CHIP
R981 1-216-655-11 METAL CHIP
R982 1-216-663-11 METAL CHIP
R983 1-216-671-11 METAL CHIP
1K
1K
120
100
100
270
270
220
1.5K
3.3K
6.8K
22K
5%
5%
5%
5%
5%
5%
Remark
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
5%
5%
1/10W
1/10W
0.5% 1/10W
0.5% 1/10W
0.5% 1/10W
5% 1/10W R984 1-216-081-00 METAL CHIP
< SWITCH >
*
*
SW951 1-762-937-11 SWITCH, ROTARY (D-BASS)
************************************************************
* A-3313-436-A MAIN BOARD, COMPLETE
*********************
3-018-389-01 HEAT SINK
3-018-390-01 BRACKET (IC)
7-685-793-09 SCREW +PTT 2.6X8 (S)
7-685-794-09 SCREW +PTT 2.6X10 (S)
Ref. No.
Part No.
Description Remark
C121 1-164-004-11 CERAMIC CHIP 0.1uF
10% 25V
C122 1-163-037-11 CERAMIC CHIP 0.022uF
10% 25V
C123 1-164-004-11 CERAMIC CHIP 0.1uF
10% 25V
C124
C141
C152
C165
1-164-004-11 CERAMIC CHIP
1-126-157-11 ELECT
C151 1-163-037-11 CERAMIC CHIP 0.022uF
10% 25V
1-124-257-00 ELECT
C161 1-126-160-11 ELECT
1-126-157-11 ELECT
0.1uF
10uF
C142 1-163-251-11 CERAMIC CHIP 100PF
2.2uF
1uF
C162 1-109-982-11 CERAMIC CHIP 1uF
10uF
10% 25V
20% 16V
5%
20%
20%
50V
50V
20% 50V
10% 10V
C163 1-164-182-11 CERAMIC CHIP 0.0033uF 10% 50V
C164 1-163-037-11 CERAMIC CHIP 0.022uF
10% 25V
16V
C166 1-164-492-11 CERAMIC CHIP 0.15uF
10% 16V
C167 1-164-492-11 CERAMIC CHIP 0.15uF
10% 16V
C168 1-126-157-11 ELECT
C170 1-163-157-00 CERAMIC CHIP
10uF
C169 1-163-227-11 CERAMIC CHIP 10PF
10PF
C171 1-126-163-11 ELECT 4.7uF
C172 1-163-133-00 CERAMIC CHIP 470PF
20%
0.5PF
5%
16V
50V
50V
20% 50V
5% 50V
C174 1-164-489-11 CERAMIC CHIP 0.22uF
10% 16V
C181 1-126-163-11 ELECT 4.7uF
20% 50V
C182 1-163-133-00 CERAMIC CHIP 470PF 5% 50V
< CAPACITOR >
1-163-235-11 CERAMIC CHIP 22PF 5% 50V
1-163-009-11 CERAMIC CHIP 0.001uF
10% 50V
1-124-584-00 ELECT
1-126-157-11 ELECT
1-124-584-00 ELECT
1-164-232-11 CERAMIC CHIP
1-164-232-11 CERAMIC CHIP
100uF
10uF
100uF
0.01uF
0.01uF
20%
20%
20%
10V
16V
10V
50V
50V
1-164-232-11 CERAMIC CHIP 0.01uF
1-163-251-11 CERAMIC CHIP 100PF 5%
50V
50V
1-163-009-11 CERAMIC CHIP 0.001uF
10% 50V
C183 1-163-251-11 CERAMIC CHIP 100PF 5% 50V
C184 1-164-489-11 CERAMIC CHIP 0.22uF
10% 16V
C191 1-163-251-11 CERAMIC CHIP 100PF
C201 1-163-263-11 CERAMIC CHIP 330PF
C202 1-163-263-11 CERAMIC CHIP 330PF
5%
5%
5%
50V
50V
50V
C204 1-164-232-11 CERAMIC CHIP 0.01uF
50V
C205 1-164-489-11 CERAMIC CHIP 0.22uF
10% 16V
C206 1-163-227-11 CERAMIC CHIP 10PF
C207 1-163-227-11 CERAMIC CHIP 10PF
C208 1-126-163-11 ELECT 4.7uF
0.5PF
0.5PF
20%
50V
50V
50V
1-126-160-11 ELECT
1-163-009-11 CERAMIC CHIP
1-163-251-11 CERAMIC CHIP
1-164-232-11 CERAMIC CHIP 0.01uF
1-164-232-11 CERAMIC CHIP
1uF
0.001uF
100PF
0.01uF
20% 50V
10%
5%
50V
50V
50V
50V
1-163-009-11 CERAMIC CHIP 0.001uF
10% 50V
1-163-059-00 CERAMIC CHIP 0.01uF
10% 50V
1-164-222-11 CERAMIC CHIP 0.22uF
1-124-584-00 ELECT 100uF
1-124-234-00 ELECT 22uF
20%
20%
25V
10V
16V
C25
C26
1-164-489-11 CERAMIC CHIP 0.22uF
10% 16V
1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
C27 1-164-222-11 CERAMIC CHIP 0.22uF
C101 1-163-263-11 CERAMIC CHIP 330PF
C102 1-163-263-11 CERAMIC CHIP 330PF
5%
5%
25V
50V
50V
C209 1-163-251-11 CERAMIC CHIP 100PF
C210 1-163-197-00 CERAMIC CHIP 470PF
C241 1-126-157-11 ELECT 10uF
C242 1-163-251-11 CERAMIC CHIP 100PF
5%
5%
20%
5%
50V
50V
16V
50V
C251 1-163-037-11 CERAMIC CHIP 0.022uF
10% 25V
C252 1-124-257-00 ELECT
C261 1-126-160-11 ELECT
2.2uF
1uF
20% 50V
20% 50V
C262 1-109-982-11 CERAMIC CHIP 1uF 10% 10V
C263 1-164-182-11 CERAMIC CHIP 0.0033uF 10% 50V
C264 1-163-037-11 CERAMIC CHIP 0.022uF
10% 25V
C265
C266
C267
C268
C269
1-126-157-11 ELECT
1-164-492-11 CERAMIC CHIP
1-164-492-11 CERAMIC CHIP
1-126-157-11 ELECT
1-163-227-11 CERAMIC CHIP
C271 1-126-163-11 ELECT
10uF
0.15uF
0.15uF
10uF
10PF
C270 1-163-227-11 CERAMIC CHIP 10PF
4.7uF
20%
10%
10%
20%
0.5PF
16V
16V
16V
16V
50V
0.5PF
50V
20% 50V
C272 1-163-133-00 CERAMIC CHIP 470PF 5% 50V
C274 1-164-489-11 CERAMIC CHIP 0.22uF
10% 16V
C281 1-126-163-11 ELECT 4.7uF
20% 50V
C104 1-164-232-11 CERAMIC CHIP 0.01uF
50V
C105 1-164-489-11 CERAMIC CHIP 0.22uF
10% 16V
C106 1-163-227-11 CERAMIC CHIP 10PF
C107 1-163-227-11 CERAMIC CHIP 10PF
C108 1-126-163-11 ELECT 4.7uF
0.5PF
0.5PF
20%
50V
50V
50V
C109 1-163-251-11 CERAMIC CHIP 100PF
C110 1-163-133-00 CERAMIC CHIP 470PF
5%
5%
50V
50V
C282
C283
C284
C301
C302
1-163-133-00 CERAMIC CHIP
1-163-251-11 CERAMIC CHIP
1-164-489-11 CERAMIC CHIP
1-124-234-00 ELECT
1-131-359-41 ELECT
470PF
100PF
0.22uF
22uF
10uF
5%
5%
10%
20%
10%
50V
50V
16V
16V
25V
– 35 –
MAIN
Ref. No.
Part No.
Description Remark
Ref. No.
Part No.
C303 1-163-251-11 CERAMIC CHIP 100PF
C304 1-164-004-11 CERAMIC CHIP 0.1uF
5% 50V
10% 25V
C305 1-107-823-11 CERAMIC CHIP 0.47uF
10% 16V
C306 1-164-232-11 CERAMIC CHIP 0.01uF
50V
C331 1-124-584-00 ELECT 100uF 20% 10V
CN301
* CN351
CN581
Description
< CONNECTOR >
1-766-260-11 CONNECTOR, FFC/FPC (ZIF) 7P
1-506-995-11 PIN, CONNECTOR (PC BOARD) 13P
Remark
1-580-907-31 PLUG, CONNECTOR (BUS CONTROL IN)
CN701 1-764-422-11 PLUG, CONNECTOR 12P
CN781 1-774-701-11 PIN, CONNECTOR 16P C332 1-124-234-00 ELECT 22uF
C353 1-164-004-11 CERAMIC CHIP 0.1uF
C354 1-126-157-11 ELECT
C355 1-126-157-11 ELECT
C356 1-126-934-11 ELECT
10uF
10uF
220uF
20% 16V
10% 25V
20% 16V
20% 16V
20% 16V CP1
< CONPOSITION CIRCUIT BLOCK >
1-519-504-11 GAP, DISCHARGE
C357 1-163-251-11 CERAMIC CHIP 100PF 5% 50V
C359 1-164-489-11 CERAMIC CHIP 0.22uF
10% 16V
C501 1-163-235-11 CERAMIC CHIP 22PF
C502 1-163-234-11 CERAMIC CHIP 20PF
C503 1-124-584-00 ELECT 100uF
5%
5%
20%
50V
50V
10V
C504 1-164-004-11 CERAMIC CHIP 0.1uF
C505 1-163-077-00 CERAMIC CHIP 0.1uF
C551 1-125-701-11 DOUBLE LAYER 0.047F
C552 1-124-584-00 ELECT 100uF
C553 1-164-004-11 CERAMIC CHIP 0.1uF
10%
10%
20%
10%
25V
25V
5.5V
10V
25V
D1
D21
< DIODE >
8-719-991-65 DIODE SB02W03C
8-719-423-10 DIODE MA8100-M-TX
D91 8-719-420-90 DIODE MA8051-M
D301 8-719-404-49 DIODE MA111
D351 8-719-422-97 DIODE MA8091-M
C554
C571
1-164-004-11 CERAMIC CHIP
1-126-163-11 ELECT
0.1uF
4.7uF
C581 1-162-638-11 CERAMIC CHIP 1uF
C582 1-163-009-11 CERAMIC CHIP 0.001uF
10% 50V
C583 1-163-077-00 CERAMIC CHIP 0.1uF
C602 1-164-222-11 CERAMIC CHIP 0.22uF
C611 1-126-157-11 ELECT 10uF
C612 1-126-157-11 ELECT 10uF
C613 1-163-077-00 CERAMIC CHIP 0.1uF
C614 1-126-157-11 ELECT 10uF
10% 25V
20% 50V
10%
20%
20%
10%
20%
16V
25V
25V
16V
16V
25V
16V
D352 8-719-404-49 DIODE MA111
D501 8-719-400-20 DIODE MA152WA
D502 8-719-911-19 DIODE 1SS119
D551 8-719-400-20 DIODE MA152WA
D552 8-719-404-49 DIODE MA111
D553 8-719-404-49 DIODE MA111
D571 8-719-034-94 DIODE MA4180-M(QZ)
D572 8-719-110-03 DIODE RD7.5ESB2
D581 8-719-017-62 DIODE MA8068-L-TX
D582 8-719-057-80 DIODE MA8160-M-TX
C615 1-126-157-11 ELECT
C616 1-126-157-11 ELECT
C617 1-126-157-11 ELECT
C621 1-126-157-11 ELECT
10uF
10uF
10uF
10uF
C622 1-163-133-00 CERAMIC CHIP 470PF
C623 1-124-589-11 ELECT 47uF
C701 1-163-077-00 CERAMIC CHIP 0.1uF
C702 1-163-077-00 CERAMIC CHIP 0.1uF
C703 1-163-077-00 CERAMIC CHIP 0.1uF
C751 1-126-096-11 ELECT 10uF
20%
20%
20%
20%
5%
16V
16V
16V
16V
50V
20% 16V
10% 25V
10% 25V
10% 25V
20% 35V
D584 8-719-034-94 DIODE MA4180-M(QZ)
D585 8-719-035-74 DIODE MA4062-M(TA)
D586 8-719-034-94 DIODE MA4180-M(QZ)
D601 8-719-423-32 DIODE MA8120-M
D621 8-719-035-54 DIODE MA4039-M(TA)
D622 8-719-911-19 DIODE 1SS119
D701 8-719-035-77 DIODE MA4068-L(TA)
D702 8-719-035-77 DIODE MA4068-L(TA)
D703 8-719-035-74 DIODE MA4062-M(TA)
D704 8-719-035-74 DIODE MA4062-M(TA)
C752 1-107-682-11 CERAMIC CHIP 1uF
C754 1-124-257-00 ELECT
C755 1-124-589-11 ELECT
C781 1-126-936-11 ELECT
2.2uF
47uF
3300uF 20% 16V
C782 1-163-077-00 CERAMIC CHIP 0.1uF
C783 1-163-077-00 CERAMIC CHIP 0.1uF
C785 1-165-319-11 CERAMIC CHIP 0.1uF
C786 1-165-319-11 CERAMIC CHIP 0.1uF
C791 1-109-982-11 CERAMIC CHIP 1uF
C901 1-163-251-11 CERAMIC CHIP 100PF
10%
20%
20% 16V
10%
10%
10%
5%
16V
50V
25V
25V
50V
50V
10V
50V
D705 8-719-035-74 DIODE MA4062-M(TA)
D706 8-719-035-74 DIODE MA4062-M(TA)
D707 8-719-034-94 DIODE MA4180-M(QZ)
D708 8-719-035-74 DIODE MA4062-M(TA)
D709 8-719-035-74 DIODE MA4062-M(TA)
D721 8-719-970-02 DIODE 1SR139-400
D722 8-719-970-02 DIODE 1SR139-400
D723 8-719-970-02 DIODE 1SR139-400
D724 8-719-970-02 DIODE 1SR139-400
D731 8-719-970-02 DIODE 1SR139-400
C906
C907
C908
C909
C910
1-163-251-11 CERAMIC CHIP
1-163-251-11 CERAMIC CHIP
1-163-251-11 CERAMIC CHIP
1-163-181-00 CERAMIC CHIP
1-163-251-11 CERAMIC CHIP
100PF
100PF
100PF
100PF
100PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C912 1-164-182-11 CERAMIC CHIP 0.0033uF 10% 50V
C913 1-164-004-11 CERAMIC CHIP 0.1uF
10% 25V
C914 1-164-004-11 CERAMIC CHIP 0.1uF
10% 25V
D732 8-719-970-02 DIODE 1SR139-400
D733 8-719-970-02 DIODE 1SR139-400
D734 8-719-970-02 DIODE 1SR139-400
D780 8-719-970-02 DIODE 1SR139-400
D781 8-719-049-38 DIODE 1N5404TU
D782 8-719-970-02 DIODE 1SR139-400
D783 8-719-970-02 DIODE 1SR139-400
D784 8-719-422-64 DIODE MA8062-M
D785 8-719-035-74 DIODE MA4062-M(TA)
– 36 –
MAIN
Ref. No.
Part No.
Description
< IC >
IC301 8-752-079-78 IC CXA2509AQ-T4
IC331 8-759-443-67 IC LC75373ED
IC351 8-759-823-87 IC LB1638M
IC501 8-759-493-98 IC uPD17708GC-567-3B9
IC551 8-759-363-81 IC XC61AN4002PR
IC581 8-759-449-89 IC BA8270F-E2
IC611 8-759-347-49 IC BA3918-V2
IC751 8-759-490-74 IC TDA7384
< JACK >
Remark
J1 1-764-808-14 JACK (ANT)(ANT IN)
J331 1-774-699-12 JACK, PIN 4P(BUS AUDIO IN/LINE OUT REAR)
J561 1-566-822-41 JACK (REMOTE IN)
< CHIP CONDUCTOR >
JC1
JC2
JC3
JC4
1-216-296-00 SHORT 0
1-216-295-00 SHORT 0
1-216-295-00 SHORT 0
1-216-296-00 SHORT 0
JC151 1-216-296-00 SHORT 0
JC161 1-216-295-00 SHORT 0
JC162 1-216-295-00 SHORT 0
JC163 1-216-296-00 SHORT 0
JC164 1-216-296-00 SHORT 0
JC251 1-216-296-00 SHORT 0
JC301 1-216-295-00 SHORT 0
JC302 1-216-295-00 SHORT 0
JC304 1-216-296-00 SHORT 0
JC331 1-216-296-00 SHORT 0
JC351 1-216-295-00 SHORT 0
JC501 1-216-296-00 SHORT 0
JC502 1-216-295-00 SHORT 0
JC503 1-216-296-00 SHORT 0
JC504 1-216-296-00 SHORT 0
JC506 1-216-296-00 SHORT 0
JC507 1-216-296-00 SHORT 0
JC509 1-216-295-00 SHORT 0
JC510 1-216-295-00 SHORT 0
JC561 1-216-295-00 SHORT 0
JC581 1-216-296-00 SHORT 0
JC582 1-216-296-00 SHORT 0
JC601 1-216-296-00 SHORT 0
JC611 1-216-296-00 SHORT 0
JC751 1-216-296-00 SHORT 0
JC781 1-216-295-00 SHORT 0
JC901 1-216-295-00 SHORT 0
JC904 1-216-295-00 SHORT 0
JC961 1-216-296-00 SHORT 0
JC962 1-216-296-00 SHORT 0
JC963 1-216-296-00 SHORT 0
JC990 1-216-296-00 SHORT 0
JC991 1-216-296-00 SHORT 0
JC992 1-216-296-00 SHORT 0
JC993 1-216-296-00 SHORT 0
JC994 1-216-295-00 SHORT 0
Ref. No.
L501
L781
L901
Part No.
Description
< COIL >
1-410-509-11 INDUCTOR 10uH
1-411-669-12 INDUCTOR 0uH
1-410-509-11 INDUCTOR 10uH
< TRANSISTOR >
Q21
Q22
8-729-120-28 TRANSISTOR 2SC1623-L5L6
8-729-021-94 TRANSISTOR 2SK1657-T1B
Q171 8-729-920-21 TRANSISTOR DTC314TKH04
Q181 8-729-920-21 TRANSISTOR DTC314TKH04
Q271 8-729-920-21 TRANSISTOR DTC314TKH04
Q281 8-729-920-21 TRANSISTOR DTC314TKH04
Q351 8-729-015-11 TRANSISTOR 2SD1802FAST-TL
Q352 8-729-027-23 TRANSISTOR DTA114EKA-T146
Q353 8-729-900-53 TRANSISTOR DTC114EK
Q354 8-729-106-60 TRANSISTOR 2SB1115A
Q355 8-729-900-53 TRANSISTOR DTC114EK
Q551 8-729-027-23 TRANSISTOR DTA114EKA-T146
Q571 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q581 8-729-900-53 TRANSISTOR DTC114EK
Q601 8-729-423-99 TRANSISTOR 2SD2137-OP
Q602 8-729-900-53 TRANSISTOR DTC114EK
Q603 8-729-027-23 TRANSISTOR DTA114EKA-T146
Q621 8-729-027-23 TRANSISTOR DTA114EKA-T146
Q622 8-729-120-28 TRANSISTOR 2SC1623-L5L6
< RESISTOR >
R9
R10
R11
R12
R13
R1
R3
R5
R7
R8
1-216-049-11 RES,CHIP
1-216-061-00 METAL CHIP
1-216-081-00 METAL CHIP
1-216-109-00 METAL CHIP
1-247-899-11 CARBON
1-216-180-00 RES,CHIP
1-216-073-00 METAL CHIP
1-249-413-11 CARBON
1-216-073-00 METAL CHIP
1-216-049-11 RES,CHIP
R14
R21
R22
R23
R24
1-216-049-11 RES,CHIP
1-216-057-00 METAL CHIP
1-216-198-00 RES,CHIP
1-216-053-00 METAL CHIP
1-249-421-11 CARBON
R91 1-216-049-11 RES,CHIP
R103 1-216-041-00 METAL CHIP
R104 1-216-109-00 METAL CHIP
R105 1-216-077-00 METAL CHIP
R106 1-216-079-00 METAL CHIP
R107 1-216-073-00 METAL CHIP
R108 1-216-081-00 METAL CHIP
R121 1-216-198-00 RES,CHIP
R122 1-216-081-00 METAL CHIP
R141 1-216-073-00 METAL CHIP
R142 1-216-198-00 RES,CHIP
R151 1-216-049-11 RES,CHIP
R152 1-216-077-00 METAL CHIP
R161 1-216-061-00 METAL CHIP
R171 1-216-033-00 METAL CHIP
1K
2.2K
1K
1.5K
2.2K
1K
470
330K
15K
18K
180
10K
470
10K
1K
1K
3.3K
22K
330K
680K
10K
22K
1K
22K
10K
1K
1K
15K
3.3K
220
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
Remark
1/10W
1/10W
1/8W
1/10W
1/4W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/4W
1/8W
1/10W
1/4W
1/10W
1/10W
1/10W
1/10W
1/8W
1/10W
1/10W
1/8W
1/10W
1/10W
1/10W
1/10W
– 37 –
MAIN
Ref. No.
Part No.
Description
R172 1-216-073-00 METAL CHIP
R174 1-216-129-00 METAL CHIP
R175 1-216-089-00 RES,CHIP
R181 1-216-033-00 METAL CHIP
R182 1-216-073-00 METAL CHIP
R184 1-216-129-00 METAL CHIP
R185 1-216-089-00 RES,CHIP
R186 1-216-182-00 RES,CHIP
R191 1-216-073-00 METAL CHIP
R192 1-216-097-00 RES,CHIP
R203 1-216-041-00 METAL CHIP
R204 1-216-109-00 METAL CHIP
R205 1-216-077-00 METAL CHIP
R206 1-216-079-00 METAL CHIP
R207 1-216-222-00 RES,CHIP
R208 1-216-081-00 METAL CHIP
R241 1-216-073-00 METAL CHIP
R242 1-216-049-11 RES,CHIP
R251 1-216-049-11 RES,CHIP
R252 1-216-077-00 METAL CHIP
R261 1-216-061-00 METAL CHIP
R271 1-216-033-00 METAL CHIP
R272 1-216-073-00 METAL CHIP
R274 1-216-129-00 METAL CHIP
R275 1-216-089-00 RES,CHIP
R281 1-216-033-00 METAL CHIP
R282 1-216-073-00 METAL CHIP
R284 1-216-129-00 METAL CHIP
R285 1-216-089-00 RES,CHIP
R286 1-216-033-00 METAL CHIP
R301 1-216-079-00 METAL CHIP
R302 1-216-097-00 RES,CHIP
R303 1-216-065-00 RES,CHIP
R304 1-216-077-00 METAL CHIP
R305 1-249-429-11 CARBON
R306 1-249-429-11 CARBON
R307 1-216-073-00 METAL CHIP
R308 1-216-105-00 RES,CHIP
R331 1-249-393-11 CARBON
R351 1-216-049-11 RES,CHIP
R352 1-249-385-11 CARBON
R353 1-216-065-00 RES,CHIP
R354 1-216-073-00 METAL CHIP
R501 1-216-097-00 RES,CHIP
R502 1-216-097-00 RES,CHIP
R503 1-216-097-00 RES,CHIP
R504 1-216-097-00 RES,CHIP
R505 1-216-097-00 RES,CHIP
R506 1-216-057-00 METAL CHIP
R507 1-216-057-00 METAL CHIP
R508 1-216-057-00 METAL CHIP
R509 1-216-097-00 RES,CHIP
R510 1-249-441-11 CARBON
R512 1-208-826-11 RES,CHIP
R513 1-216-699-11 METAL CHIP
R516 1-216-097-00 RES,CHIP
R517 1-216-097-00 RES,CHIP
R518 1-216-097-00 RES,CHIP
18K
100K
4.7K
15K
10K
10K
10K
220K
10
1K
3.3K
220
10K
2.2M
47K
220
10K
2.2M
47K
220
22K
10K
1K
1K
15K
470
330K
15K
18K
10K
10K
2.2M
47K
220
10K
2.2M
47K
220
10K
100K
2.2K
100K
100K
68K
100K
100K
100K
100K
2.2
4.7K
10K
100K
100K
100K
100K
100K
2.2K
2.2K
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
2%
0.5% 1/10W
5%
5%
5%
Remark
Ref. No.
Part No.
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/8W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/8W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/4W
1/4W
1/10W
1/10W
1/4W
1/10W
1/6W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/4W
1/10W
1/10W
1/10W
1/10W
R519 1-216-097-00 RES,CHIP
R522 1-216-097-00 RES,CHIP
R523
R524
1-216-097-00 RES,CHIP
1-216-097-00 RES,CHIP
R525 1-216-097-00 RES,CHIP
R526 1-216-097-00 RES,CHIP
R527 1-216-097-00 RES,CHIP
R528
R530
R531 1-216-097-00 RES,CHIP
R533 1-216-097-00 RES,CHIP
R535 1-216-097-00 RES,CHIP
R537
R538
1-216-246-00 RES,CHIP
1-216-097-00 RES,CHIP
R539 1-216-097-00 RES,CHIP
R540 1-249-421-11 CARBON
R541 1-249-421-11 CARBON
R542
R543
R544 1-216-057-00 METAL CHIP
R545 1-249-429-11 CARBON
R546 1-249-413-11 CARBON
R547
R551
1-208-822-11 RES,CHIP
1-216-097-00 RES,CHIP
R552 1-216-057-00 METAL CHIP
R561 1-208-806-11 RES,CHIP
R562 1-208-806-11 RES,CHIP
R563
R564
R571 1-216-097-00 RES,CHIP
R572 1-216-089-00 RES,CHIP
R573 1-216-089-00 RES,CHIP
R574
R575
1-249-421-11 CARBON
1-216-073-00 METAL CHIP
R581 1-216-073-00 METAL CHIP
R582 1-216-025-00 RES,CHIP
R583 1-247-807-31 CARBON
R584
R601
R602 1-249-395-11 CARBON
R603 1-216-186-00 RES,CHIP
R621 1-216-065-00 RES,CHIP
R701
R702
1-216-025-00 RES,CHIP
1-216-025-00 RES,CHIP
R703 1-216-057-00 METAL CHIP
R704 1-216-057-00 METAL CHIP
R705 1-216-057-00 METAL CHIP
R706
R707
R708 1-208-806-11 RES,CHIP
R709 1-208-806-11 RES,CHIP
R710 1-216-025-00 RES,CHIP
R751
R752
Description
1-216-097-00 RES,CHIP
1-216-097-00 RES,CHIP
1-249-421-11 CARBON
1-249-421-11 CARBON
1-216-025-00 RES,CHIP
1-216-025-00 RES,CHIP
1-216-166-00 RES,CHIP
1-249-393-11 CARBON
1-216-206-00 RES,CHIP
1-216-049-11 RES,CHIP
1-216-198-00 RES,CHIP
1-216-049-11 RES,CHIP
R781 1-216-049-11 RES,CHIP
R901 1-216-057-00 METAL CHIP
R902 1-216-057-00 METAL CHIP
100
100
100K
47K
47K
2.2K
10K
10K
100
100
2.2K
2.2K
2.2K
10K
470
47K
100K
2.2K
10K
10K
100K
100K
100K
100K
100K
100K
100K
100K
2.2K
2.2K
100K
100K
100K
100K
100K
100K
100K
2.2K
1K
10K
10K
100
1K
1K
1K
2.2K
2.2K
47
10
15
330
4.7K
100
100
2.2K
2.2K
2.2K
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
1/8W
1/10W
0.50% 1/10W
0.50% 1/10W
5% 1/10W
1/8W
1/10W
1/10W
1/10W
1/10W
1/8W
1/4W
1/4W
1/8W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
Remark
1/10W
1/10W
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
2%
5%
1/10W
1/10W
5% 1/10W
0.50% 1/10W
0.50% 1/10W
1/8W
1/10W
1/10W
1/4W
1/4W
1/4W
1/4W
1/10W
1/4W
1/4W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/4W
1/10W
1/10W
1/10W
1/4W
– 38 –
MAIN
Ref. No.
Part No.
Description
< SWITCH >
S501 1-571-478-11 SWITCH, SLIDE (POWER SELECT)
S502 1-571-478-11 SWITCH, SLIDE (FREQUENCY SELECT)
S551 1-692-431-21 SWITCH, TACTILE (RESET)
Remark
TU1
< TUNER >
A-3282-034-A TUNER UNIT TUX-010 (E)
< VIBRATOR >
X501 1-567-713-11 VIBRATOR, CRYSTAL (4.5MHz)
************************************************************
MISCELLANEOUS
**************
9 1-776-207-81 CORD (WITH CONNECTOR) (POWER)
F781 1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10A)
HP901 1-500-157-21 HEAD, MAGNETIC (PLAYBACK)
M901 A-3291-665-A MOTOR ASSY, MAIN (CAPSTAN/REEL)
************************************************************
**************
HARDWARE LIST
**************
#1
#2
#3
#4
#5
7-621-772-10 SCREW +B 2X4
7-685-793-09 SCREW +PTT 2.6X8 (S)
7-685-792-09 SCREW +PTT 2.6X6 (S)
7-685-794-09 SCREW +PTT 2.6X10 (S)
7-685-106-19 SCREW +P 2X10 TYPE2 NON-SLIT
#6
#7
7-624-104-04 STOP RING 2.0, TYPE-E
7-627-553-17 PRECISION SCREW +P 2X2 TYPE 3
************************************************************
ACCESSORIES & PACKING MATERIALS
********************************
1-473-067-71 REMOTE COMMANDER (RM-X4S)
3-861-691-11 MANUAL, INSTRUCTION
(ENGLISH, SPANISH, CHINESE)
3-861-692-11 MANUAL, INSTRUCTION, INSTALL
(ENGLISH, SPANISH, CHINESE)
X-3373-412-1 CASE (PANEL) ASSY (for FRONT PANEL)
************************************************************
Ref. No.
Part No.
Description
PARTS FOR INSTALLATION AND CONNECTIONS
**************************************
501
502
503
504
505
3-916-161-31 FRAME ASSY
X-3370-077-1 SCREW ASSY (AE.KEY), FITTING
X-3371-913-1 SCREW ASSY (J)
1-776-207-81 CORD (WITH CONNECTOR) (POWER)
X-3373-432-1 BRACKET ASSY
Remark
506 3-018-384-01 COLLAR
501
503
505
502
506
504
– 39 –
XR-C5090
9-925-789-11
Sony Corporation
Personal & Mobile Communication Company
– 40 –
98B0523-1
Printed in Japan © 1998. 2
Published by Quality Assurance Dept.
Advertisement
Key features
- FM/AM Cassette Car Stereo
- 4-track 2-channel stereo tape deck
- 40W x 4 (at 4 ohms) maximum output power
- Remote commander control
- Built-in power amplifier
- External audio source input
- Power antenna control lead
- ATT control/Telephone line control
- Bass & treble controls
- 12 VDC car battery