Samsung | BD-F5100 | 用户手册 | Samsung BD-F5100 User manual

BD-F5100
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dangerous
voltage" inside the product that presents
a risk of electric shock or personal injury.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Do not install this equipment in a confined
space such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
CAUTION
Blu-ray Disc Player USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF
DIRECTED. BE SURE TO OPERATE Blu-ray
Disc Player CORRECTLY AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS
2
This symbol indicates important
instructions accompanying the product.
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
connectors for connections.
IMPORTANT NOTE
The mains lead on this equipment is supplied
with a molded plug incorporating a fuse. The
value of the fuse is indicated on the pin face
of the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement
fuse cover is required, it must be of the same
color as the pin face of the plug. Replacement
covers are available from your dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug
to a mains jack, as there is a risk of shock
hazard from the bared flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user
manual is licenced under certain intellectual
property rights of certain third parties.
CLASS 1 LASER product
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM (IEC 60825-1)
• THIS product UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND
DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1.
Read these instructions.
3.
Heed all warnings.
2.
4.
5.
6.
7.
8.
9.
Keep these instructions.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including AV
receivers) that produce heat.
Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or sold
with the apparatus.
When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches
on a disc may reduce
sound and picture quality
or cause skipping
-- Avoid touching the surface of a disc
where data has been recorded.
-- Hold the disc by the edges so that
fingerprints will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water
and wipe with a soft cloth.
-- When cleaning, wipe gently
from the inside to the outside of the disc.
• Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protection jacket and
store vertically.
Handling Cautions
• Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.
• Do not plug multiple electric devices into
the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.
• Maintenance of Cabinet.
-- Before connecting other components to
this player, be sure to turn them off.
-- If you move your player suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and
lens and cause abnormal disc playback. If
this occurs, unplug the player, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try
to play back again.
• If the product makes an abnormal noise
or produces a burning smell or smoke,
turn off the power switch immediately and
disconnect the power plug from the wall
outlet. Then, contact the nearest customer
service centre for technical assistance. Do
not use the product. Using the product as
it is may cause a fire or an electric shock.
Copyright
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this
user's manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Ltd.
Contents
Safety Information
Language Settings...................................... 13
Precautions.................................................. 2
General Settings......................................... 13
Warning........................................................ 2
Disc Storage & Management........................ 3
Security Settings........................................ 13
Support Settings........................................ 13
Handling Cautions........................................ 3
Media Play
Getting Started
Playing Files on a USB Device.................... 14
Copyright..................................................... 3
Before using the User Manual....................... 4
Logos of Discs the player can play............... 4
Accessories.................................................. 6
Front Panel................................................... 6
Rear Panel.................................................... 6
Remote Control............................................ 7
Connections
Connecting to a TV....................................... 7
Connecting to an Audio System................... 8
Connecting to a Network Router.................. 8
Playing a Commercially Recorded Disc....... 14
Playing a Disc with User Recorded
Content...................................................... 15
Playing Content Located in Your PC........... 15
Controlling Video Playback......................... 15
Controlling Music Playback......................... 16
Playing Photo Contents.............................. 17
Appendix
Troubleshooting.......................................... 17
Specifications............................................. 19
Settings
The Initial Settings Procedure....................... 9
Menu Navigation........................................... 9
Accessing the Settings Menu....................... 9
Display Settings............................................ 9
Audio Settings............................................ 10
Network Settings........................................ 11
System Settings......................................... 12
3
Getting Started
Region Code
Before using the User Manual
Disc Types and Contents your player can play
Media
VIDEO
MUSIC
PHOTO
✎✎ NOTES
Disc Type
Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Details
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing DivX,
MKV or MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Number for this player is
displayed on the rear panel of the player.
Disc
Type
Region
Code
Blu-ray
Disc
b
c
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds
25 Mbps.
`` Playback may not work for some types of discs, or when you use specific functions, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to
this if necessary.
`` When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
``
``
``
``
Disc types your player cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
4
• DVD-RAM
• Super Audio CD
(except CD layer)
• 3.9 GB DVD-R for
• DVD-RW (VR
Authoring.
mode)
• CVD/CD-ROM/
CDV/CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
a
DVDVIDEO
Logos of Discs the player can play
Blu-ray Disc
BD-LIVE
DivX
PAL broadcast System
in U.K., France,
Germany, etc.
Area
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
India, China, Russia, Central
and South Asia.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
Supported File Formats
Notes on the USB connection
• Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
• The player does not support folder or file
names longer than 128 characters.
• Some USB/External HDD/digital camera
devices may not be compatible with the player.
• Your player supports the FAT16, FAT32,
and NTFS file systems.
• Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
• The player does not support the PTP protocol.
• Do not disconnect a USB device during a
“loading” process.
• The bigger the image resolution, the longer
the image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded
from commercial sites.
• Your player only supports video with a frame rate under 30fps (frames per second).
• Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
and USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with
this player.
• If some USB devices require excessive power, they may be limited by the circuit safety
device.
• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into
a wall socket.
If the problem continues, contact the USB HDD manufacturer.
• You must remove the USB storage device safely by performing the "Safely Remove USB"
function to prevent possible damage to the USB memory.
Press the HOME button to move to the home screen, press the YELLOW (C) button, and
then press the v button.
• SAMSUNG is not responsible for any data file damage or data loss.
• Your player does not support NTFS compressed files, sparse files, or encrypted files.
• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Video File Support
File Extension
*.avi
Container
AVI
Video Codec
DivX 3.11/4.x/5.x/6.1
MP4v3
H.264 BP/MP/HP
VC-1 AP
*.mkv
MKV
DivX 5.1/6.0
H.264 BP/MP/HP
*.wmv
WMV (wmv9)
*.mp4
MP4
*.mpg
*.mpeg
PS
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
Audio Codec
MP3
Dolby Digital
DTS
WMA
PCM
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
Resolution
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
•• Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file
itself is corrupted.
-- Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback.
-- The Seek (skip) function is not available if the file’s index table is damaged.
•• Video decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
•• Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bit rate: 320kbps
Music File Support
File Extension
*.mp3
*.wma
Container
MP3
Audio Codec
Support Range
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit-rates from 5kbps to 355kbps
MP3
WMA
-
Picture File Support
File Extension
*.jpg
*.jpeg
*.jpe
*.png
Type
Resolution
JPEG
15360x8640
PNG
15360x8640
1920x1080
1920x1080
5
AVCHD (Advanced Video Codec High Definition)
Front Panel
• This player can play back AVCHD format discs. These discs are normally recorded and used
in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the “x.v.Color” format. This player can play back AVCHD discs that
use “x.v.Color” format.
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
PLAY/PAUSE BUTTON
STOP BUTTON
OPEN/CLOSE BUTTON
POWER BUTTON
✎✎ NOTES
`` Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
`` “x.v.Color” offers a wider color range than normal DVD camcorder discs.
`` Some DivX, MKV and MP4 format discs may not play, depending on the video resolution and frame rate
condition.
Accessories
✎✎ NOTES
Check for the supplied accessories shown below.
BONUS
VIEW
6
Batteries for Remote
Control (AAA Size)
USB HOST
`` When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button
on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and
then press the v button.
AUDIO
HDMI Cable
DISC TRAY
REMOTE CONTROL SENSOR
User Manual
HOME
REPEAT
A-B
REPEAT
SUBTITLE
`` You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
Rear Panel
FULL
SCREEN
Remote Control
HDMI OUT
LAN
DIGITAL AUDIO OUT
Connections
Remote Control
Tour of the Remote Control
Turn the player on and off.
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Press to eject a disc.
Connecting to a TV
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
Press numeric buttons to operate options.
Use to enter the popup menu/title menu.
Use to enter the disc menu.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to skip backwards or forwards.
Press to stop a disc.
Press to play a disc.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
AUDIO
HOME
SUBTITLE
Press to use Tools menu.
Press to exit the menu.
Return to the previous menu.
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
Allows you to repeat A-B disc.
Installing batteries
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Use to select menu items and change menu
values.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to use bonusview function.
Audio
Video
Press to move to the home menu.
✎✎ NOTES
!!
Press to use full screen function, during the
bluray disc/DVDs playback, this button does
not operate.
Allows you to repeat a title, chapter, track or
disc.
`` If the remote does not operate properly:
• Check the polarity (+/–) of the batteries.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
CAUTION
`` Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
✎✎ NOTES
`` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
Out on the player to an audio system to hear audio.
`` An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
`` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
`` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
`` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2)
HDMI cable.
`` HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
7
Connecting to an Audio System
Connecting to a Network Router
You can connect the Blu-ray player to an audio system using one of the methods illustrated
below.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
You can connect your player to your network router using one of the methods illustrated below.
To use the DLNA network functionality, you must connect your PC to your network as shown
in the illustrations.
Wired Network
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or a DTS decoder
Or
• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the
product to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Broadband modem
(with integrated router)
Broadband
service
Router
Broadband
modem
Method 1
Audio
8
Method 2
Audio
✎✎ NOTES
Broadband
service
`` Internet access to Samsung's software update server may not be allowed, depending on the router you use or your
ISP's policy. For more information, contact your ISP (Internet Service Provider).
`` DSL users, please use a router to make a network connection.
Settings
The Initial Settings Procedure
`` If you leave the player in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the player is
left in the screen saver mode for more than 25
minutes, the power will automatically turn off.
• The Home screen will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
player after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
• After the loading process of this product is
finished, the panel buttons and remote control
can be operated.
Menu Navigation
AUDIO
`` The Home menu will not appear if you do not
configure the initial settings except as noted below.
`` If you press the BLUE (D) button during
network setup, you can access the Home menu
even if the network setup is not completed yet.
`` When you return to the Home menu, the full
screen mode is cancelled automatically.
`` If you want to display the Initial Setting screen
again to make changes, press the @ button on
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
`` After the initial settings process is complete.
you can operate the HDMI-CEC function.
`` If you want to use the Anynet+(HDMI-CEC)
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Initial Settings Procedure.
Selects Music.
2
Selects Settings.
3
Displays the buttons you can use on the
remote to access functions.
4
Selects applications.
5
Selects Videos.
6
Selects Photos.
✎✎ NOTES
SUBTITLE
`` The Videos, Photos, and Music options require
that you have an appropriate disc inserted into
the player or a USB flash device attached to
the player.
1
The Initial Settings Procedure lets you set
the OSD and menu languages, configure the
connection to your home network, and choose
the aspect ratio output (screen size and format)
that is correct for your TV.
✎✎ NOTES
HOME
1
3
2
BONUS
1
2
3
4
Accessing the Settings Menu
4
REPEAT
REPEAT
FULL
HOME Button : Press to move to the Home
menu.
VIEW
A-B
SCREEN
RETURN Button : Return to the previous menu.
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
• Home Menu
1
Videos
Photos
Music
Settings
2
5
1.
2.
3.
EXIT Button : Press to exit the current menu.
6
To access the Settings menu and sub-menus,
follow these steps:
4
4.
5.
Press the POWER button.
The Home Menu appears.
Press the ◄► buttons to select Settings,
and then press the v button.
Press the ▲▼ buttons to select the
desired submenu, and then press the
v button.
Press the ▲▼ buttons to select the desired
item, and then press the v button.
Press the EXIT button to exit the menu.
✎✎ NOTES
`` The access steps may differ depending on
the menu you selected. The OSD (On Screen
Display) may change in this player after you
upgrade the software version.
Display Settings
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc.
TV Aspect Ratio
Depending on the type of television you have,
you may want to adjust the screen size setting.
✎✎ NOTES
`` Depending on the disc type, some aspect
ratios may not be available.
`` If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest inter-connectivity feature.
When you connect a Samsung player and a Samsung TV
with BD Wise to each other via HDMI, and BD Wise is on
in both the player and TV, the player outputs video at the
video resolution and frame rate of the Blu-ray Disc/DVDs.
✎✎ NOTES
`` When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
`` If the player is connected to a device that does not
support BD Wise, you can not use the BD Wise function.
`` For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
576p/480p. The number indicates the number
of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
App 1
No Disc
a Change Device
d View Devices " Enter
3
9
Resolution according to the output
mode
• Blu-ray Disc/E-contents/Digital Contents
playback
HDMI / connected
Output
HDMI Mode
Setup
Blu-ray Disc
BD Wise
Auto
1080@60F
(Movie Frame : Off)
Resolution of
Blu-ray Disc
E-contents/
Digital
contents
1080p
Max. Resolution Max. Resolution
of TV input
of TV input
1080@60F
1080@60F
Movie Frame :
Auto (24Fs)
1080@24F
1080@24F
1080i
720p
1080i
576p/480p
720p
1080i
576p/480p
576p/480p
• DVD playback
720p
Output
Setup
HDMI / connected
Auto
Max. Resolution of TV input
BD Wise
1080p
1080i
720p
576p/480p
10
HDMI Mode
576i/480i
1080p
1080i
720p
576p/480p
✎✎ NOTES
`` If the TV you connected to the player does not
support Movie Frame or the resolution you
selected, the message “If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. Do you
want to change the resolution?” appears. If you
select Yes, the TV’s screen will go blank for 15
seconds, and then the resolution will revert to
the previous resolution automatically.
`` If the screen stays blank after you have
changed the resolution, remove all discs,
and then press and hold the @ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display Setup
that your TV will support.
`` When the factory default settings are restored,
all stored user BD data is deleted.
`` The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to
Auto allows you to adjust the player’s HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate. You
can select Movie Frame only when the player
is in the HDMI 1080p output resolution mode.
HDMI Color Format
Lets you set the color space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HDMI Deep Color
Lets you output video from the HDMI OUT jack with
Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
Progressive Mode
Lets you improve picture quality when viewing DVDs.
Audio Settings
Digital Output
Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output Selection table.
Digital Output Selection
Setup
Connection
PCM
Audio Stream
on Blu-ray
Disc
Definition for
Blu-ray Disc
HDMI
Receiver
Coaxial
Up to 7.1ch PCM 2ch
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
HDMI supported
HDMI Receiver
AV receiver or
or Coaxial
Coaxial
HDMI Receiver
Coaxial
PCM
PCM 2ch
Re-encoded DTS
Dolby Digital
PCM 2ch
PCM 2ch
Dolby Digital
Dolby Digital
Re-encoded DTS
Dolby Digital Plus
PCM 2ch
PCM 2ch
Dolby Digital
Plus
Dolby Digital
Re-encoded DTS
Dolby TrueHD
PCM 2ch
PCM 2ch
Dolby TrueHD
Dolby Digital
Re-encoded DTS
DTS
PCM 2ch
PCM 2ch
DTS
DTS
Re-encoded DTS
DTS-HD High
Resolution Audio
PCM 2ch
PCM 2ch
DTS-HD High
Resolution Audio
DTS
Re-encoded DTS
PCM 2ch
PCM 2ch
DTS
Re-encoded DTS
DTS-HD Master
Audio
Audio Stream
on DVD
Bitstream
(Unprocessed)
PCM
PCM
Dolby Digital
DTS
Any
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS-HD Master
Audio
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Decodes main
feature audio and
Outputs only main feature audio BONUSVIEW audio
Decodes main feature
stream so that your AV receiver stream together into
audio and BONUSVIEW
can decode the audio bitstream. PCM audio and add
audio stream together
Navigation Sound
You will not hear BONUSVIEW
into PCM audio and add
Effects, then reaudio and Navigation Sound
Navigation Sound Effects.
encodes
the PCM
Effects.
audio into DTS
bitstream
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
PCM 2ch
Dolby Digital
DTS
Decodes main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and add
Navigation Sound
Effects, then reencodes the PCM
audio into Dolby
Digital bitstream
** If Source Stream is 2ch, "Re-encoded
Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack
of the main feature.
-- BONUSVIEW audio : An additional
soundtrack such as the director or actor’s
commentary.
-- Navigation Sound Effects : When you
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different on
each Blu-ray Disc.
✎✎ NOTES
`` Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
`` If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
`` Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
`` Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
`` If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
`` If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Reencoded or Unprocessed) in the setup menu.
`` If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM signals
downsampled to 48KHz before they are
outputted to an amplifier. Choose only if your
amplifier or receiver is not compatible with a
96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
True HD audio.
• Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
• Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
• On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
Network setup directions start below.
✎✎ NOTES
`` This unit can only be connected to a Network
via a wired connection.
Wired Network Settings
1.
2.
3.
In the Home menu, press the ◄►
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select Network,
and then press the v button.
Press the ▲▼ buttons to select Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Settings
Wired Network Settings
Display
Audio Internet Protocol Setup
Network
System
Language
IP Address
Subnet Mask
Gateway
DNS
Security
General
Support
4.
5.
DNS Server
: Auto
: 0
0
0
0
: 0
0
0
0
: 0
: Auto
: 0
0
0
0
0
7.
9.
In the Internet Protocol Setup field,
select Auto if it is not selected. (Press
v select Auto, and then press v.)
The Auto Function acquires and fills
in the values for IP Address, Subnet
Mask, etc., automatically.
`` This process can take up to five minutes.
After the Network Function has acquired
the network values, press the RETURN
button.
Select Network Test, and then press
v to ensure the player has connected
to your network.
If the Network Function does not acquire
the network values, go to the directions
for Manual Setup.
Before you start manual network setup, you
need the network setting values.
To enter the Network Settings into your
player, follow these steps:
1.
2.
3.
0
> Move " Select ' Return
When the Network Test is complete,
press the RETURN twice to return to
the Main Menu.
Manual Network Setup
\
0
✎✎ NOTES
6.
8.
4.
5.
6.
7.
8.
9.
In the Home menu, press the ◄►
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select
Network, and then press the v
button.
Press the ▲▼ buttons to select Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Select the Internet Protocol Setup field,
and then press the v button.
Press the ▲▼ buttons to select Manual,
and then press the v button.
Press the ▼ button to go to the first
entry field (IP Address).
Use the number buttons on your remote
to enter numbers.
When done with each field, use the ►
button to move to the next field. You
can also use the other arrow buttons to
move up, down, and back.
Enter the IP Address, Subnet Mask,
and Gateway values in the same way.
10. Press the ▼ button to go to DNS.
11
11. Press the ▼ button to go to the first
DNS entry field.
12. Enter the numbers as above.
13. Press the Return button on your remote.
14. Run a Network Test to ensure the player
has connected to your network.
Using BD-LIVE™
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
1.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
BD-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• Prohibit : No Internet connection is allowed
for any BD-LIVE content.
✎✎ NOTES
`` What is a valid certificate?
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
`` The Internet connection may be restricted
while you are using BD-LIVE contents.
12
2.
3.
Attach a USB memory stick to the
USB jack on the front of the player, and
then check its remaining memory. The
memory device must have at least 1GB
of free space to accommodate the BDLIVE services.
Insert a Blu-ray Disc that supports BDLIVE.
Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
✎✎ NOTES
`` The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
The DLNA Function
DLNA lets you play music, video, and photo
files located in your PC or NAS on the player.
To use DLNA with your player, you must
connect the player to your network.
(See pages 11~12).
To use DLNA with your PC, you must install
DLNA software on your PC.
If you have NAS, you can use DLNA without
any additional software.
To download DLNA software
1.
Go to Samsung.com
3.
On the next screen, click Get downloads
under Downloads.
2.
4.
5.
Click Support, enter your player’s
product number in the field that
appears, and then click Product.
Click Software on the next page.
Click the icon in the DLNA line under File
to start the download.
System Settings
Initial Settings
By using the Initial Settings function, you can
set the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of
this user manual (page 9).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
✎✎ NOTES
`` If this function is set to On, Standby power
consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
To operate this function, connect this player to
an Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY
(
) button on the TV’s remote control.
For more information, please see the TV user
manual.
✎✎ NOTES
`` This function is not available if the HDMI cable
does not support CEC.
`` If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.
`` Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
`` After the product was turned off, disconnecting
and connecting the power cable turns it on
automatically. At the moment, it automatically
turns off in about 15 seconds for reestablishing Anynet+ connection.
`` For some TV products, if connected to this
product with Anynet+ function, turning the
TV on may display a warning popup message
saying no connection was found. Still, Anynet+
connection is properly established and
available to use.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
You can check the device’s information
including the storage size, delete the BD data,
or change the Flash memory device.
✎✎ NOTES
`` In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
`` Your player supports the FAT16, FAT32, and
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
`` The Resume Play function may not work after
you format the storage device.
`` The total memory available to BD Data
Management may differ, depending on the
conditions.
DivX® Video On Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Language Settings
You can select the language you prefer for the
Home menu, disc menu, audio, and subtitles.
✎✎ NOTES
`` The selected language will only appear if it is
supported on the disc.
Security Settings
When you access this function for the first
time, the PIN setup screen appears. Enter a
desired 4-digit PIN using the number buttons.
(The default PIN is 0000.)
BD Parental Rating
Prevents playback of Blu-ray Discs with
specific age ratings unless the 4 digit PIN is
entered.
DVD Parental Rating
This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of DVDs that your family can watch.
Select the rating level you want to set. For example, if you select Level 6, discs rated
above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature content.
Change PIN
Change the 4-digit password used to access
security functions.
If you forget your password
1. Remove any discs.
2. Press and hold the @ button on the front
panel for 5 seconds or more.
All settings will revert to the factory settings.
✎✎ NOTES
`` When the factory default settings are restored,
all the user stored BD data will be deleted.
General Settings
Time Zone
Lets you specify the time zone that is
applicable to your area.
Support Settings
Software Upgrade
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
By Online
To upgrade By Online, follow these steps:
1.
2.
3.
4.
Select By Online, and then press the
v button. The Connecting to Server
message appears.
A popup message will appear if an
update is available.
If you select Yes, download process
started. (Never turn the player on during
an upgrade.)
When the update is completed, the
player will restart automatically.
✎✎ NOTES
`` The Update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`` Never turn the player off or back on manually
during the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
`` No disc should be in the product when you
upgrade the software by Online.
By USB
To upgrade by USB, follow these steps:
1.
Visit www.samsung.com/bluraysupport.
3.
Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
2.
4.
5.
6.
7.
Download the latest USB software
upgrade zip archive to your computer.
Copy the RUF file to a USB flash drive.
Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
In the player’s menu, go to Settings >
Support > Software Upgrade.
Select By USB.
✎✎ NOTES
`` No disc should be in the product when you
upgrade the software using the USB Host jack.
`` When the software upgrade is done, check the
software details in the software Upgrade menu.
`` Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
`` Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
13
To set Auto Upgrade Notification on, follow
these steps:
1.
Select Auto Upgrade Notification, and
then press the v button.
2. Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup message.
1.
To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player on
or off manually during an upgrade.)
The update progress popup appears.
When the update is complete, the player
turns off again automatically.
Press the POWER button to turn on the
player.
2.
3.
4.
✎✎ NOTES
`` The update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`` Never turn the player off or on manually during
the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
Lets you view the general disclaimer regarding
third party contents and services.
Reset
Returns all settings to their factory defaults
except for the network settings.
Media Play
Playing a Commercially Recorded
Disc
1.
2.
3.
Press the 8 button to close the disc
tray. Playback starts automatically.
1.
Move to the Home menu.
3.
Press the ◄► button to select Yes, and
then press the v button.
4.
Press the ▲▼ buttons to select USB,
and then press the v button.
Music
123
a
123
6.
Settings
App 1
a Change Device
c Safely Remove USB d View Devices " Enter
Press the ◄► buttons to select Videos,
Music, or Photos, and then press the
v button. Go to Step 7.
4-1. If you pressed the BLUE (D) button, the
screen below appears. Go to Step 5-1.
123
In Stop mode, connect the USB storage
device to the USB port on the front
panel of the player.
The message “Do you want to access
the device?” is displayed.
If you have a disc in the Blu-ray player,
press the RED (A) or BLUE (D) button.
If you do not, go to Step 6.
If you pressed the RED (A) button, go to
Step 5.
If you pressed the BLUE (D) button, go
to Step 4-1.
Photos
No Disc
Place a disc gently into the disc tray
with the disc's label facing up.
You can play multimedia files located on a
USB storage device.
5.
14
Press the 8 button to open the disc
tray.
Playing Files on a USB Device
2.
Videos
a
Settings
App 1
123
d Home " Enter
5-1. Press the ◄► buttons to select USB,
then press the v button.
6-1. Press the ▲▼ buttons to select Videos,
Music or Photos, and then press the
v button.
7.
8.
A screen appears listing the contents
of the device. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
9.
Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
✎✎ NOTES
`` Even though the player will display folders for
all content types, it will only display files of the
Content Type you selected in Step 6 or Step
6-1.
For example, if you selected music, you will
only be able to see music files. You can change
this selection by returning to the Home screen
and repeating Step 4.
10. Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
Playing a Disc with User Recorded
Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
1.
2.
`` If you insert a disc when playing a USB storage
device, the device mode changes to Blu-ray,
DVD or CD automatically.
3.
4.
5.
6.
7.
To play content located in your PC on your
Blu-ray disc player, you must connect the
Blu-ray player to you network and install DLNA
Software on your PC.
8.
To Play Content From Your PC
Use the ◄► buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
1.
Move to the Home menu
3.
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 2. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 2.
4.
In the Device screen that appears, select
your PC, and then press the v button.
✎✎ NOTES
✎✎ NOTES
`` You must remove the USB storage device
safely by performing the “Safely Remove USB”
function in order to prevent possible damage
to the USB memory. Press the HOME button to
move to the Home menu, select the YELLOW
(C) button, and then press the v button.
Place a user recorded disc into the
disc tray with the disc’s label facing
up, and then close the tray. The Device
Connected pop-up appears.
Playing Content Located in Your
PC
2.
Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
Use the ◄► buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
✎✎ NOTES
A screen appears listing the contents
of the disc. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
Press the BLUE (D) button on your
remote (Device).
5.
6.
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 4. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 4.
Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
Controlling Video Playback
You can control the playback of video content
located on a Blu-ray disc, DVD, CD, USB
device, or you computer. Depending on the
media, some of the functions described in this
manual may not be available.
Buttons on the Remote Control
used for Video Playback
2
1
AUDIO
HOME
SUBTITLE
A screen appears listing the contents of
the PC. Depending on how the contents
are arranged, you will see either folders,
individual files, or both.
If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
15
Playback related buttons
The player does not play sound in Search,
Slow or Step mode.
• To return to normal speed playback, press
the 6 button.
6 button
Starts playback.
7 button
Pauses playback.
5 button
Stops playback.
Fast Motion
Play
During playback, press the 3 or
4 button.
Each time you press the 3 or
4 button, the playback speed
will change.
Slow Motion
Play
In pause mode, press the 4
button.
Each time you press the 4
button, the playback speed will
change.
Step Motion
Play
In pause mode, press the 7
button.
Each time you press the 7
button, a new frame appears.
Skip Motion
Play
During playback, press the 1 or
2 button.
Each time you press the 1 or
2 button, the disc moves to the
previous or next chapter or file.
Using the disc menu, title menu, popup menu, and title list
DISC MENU
button
TITLE MENU
button
POPUP MENU
button
During playback, press this button
to start the disc menu function.
During playback, press this button
to start the title menu function.
During playback, press this button
to start the popup menu function.
Controlling Music Playback
You can control the playback of music located
on a Blu-ray disc, DVD, CD, USB device, or
your computer.
Buttons on the Remote Control
used for Music Playback
Skip : During playback, press the 1 or 2
button to move to the previous or next file of
the playlist.
3
5 button : Stops a track.
4
5
6
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4
button.
Each time you press the 3 or 4 button,
the playback speed will change.
Pause : Pauses a track.
6 button : Plays the currently selected
track.
1.
Playlist
1/6
Tools
TRACK 001
Repeat Mode
? Off \05:57
TRACK 002
< Adjust " Select ' Return
04:27
TRACK 003
4
3
AUDIO
HOME
SUBTITLE
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
+
00:08 / 05:57
04:07
TRACK 004
Songs are played in the order
in which they were recorded.
(
) Track
The current song is repeated.
(
) All
All songs are repeated.
(
)Shuffle
Shuffle plays songs in random
order.
Playlist
1.
To move to the Music List, press the 5
or RETURN button.
The Music List screen appears.
Music TRACK 001
TRACK 005
2.
3.
CD
" Pause
Press the v button.
02:38
TRACK 003
TRACK 004
02:38
02:38
TRACK 006
TRACK 005
02:38
02:38
TRACK 008
TRACK 007
02:38
02:38
TRACK 010
TRACK 009
02:38
02:38
2.
03:35
' Return
Press the ◄► buttons to select Track,
All, Shuffle, or Off.
TRACK 002
02:38
03:17
Tools
1/2 Page
TRACK 001
03:41
TRACK 006
5
6
NUMBER buttons (Audio CD (CD-DA) only) :
During Playlist playback, press the desired
track number.
The selected track is played.
Off
During Playlist playback, press the
TOOLS button.
TRACK 001
2
Repeat an Audio CD (CD-DA)/
MP3
1
1
16
2
3.
CD
c Select
( ) Jump Page
' Return
Press the ▲▼◄► buttons to move
to a desired track, and then press the
YELLOW (C) button. A check appears
on the track.
Repeat this procedure to select
additional tracks.
To remove a track from the list, move to
the track, and then press the YELLOW
(C) button again.
The check on the track is cancelled.
4.
5.
6.
When done, press the v button.
To change the play list, press the Return
button to return to the Music List.
Repeat Steps 2, 3, and 4.
To cancel the play list and return to the
Home screen, press the Return or Exit
button.
✎✎ NOTES
`` You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
`` If you remove all the tracks from a play list and
then press the v button, the player lists and
plays all the tracks on the disc.
✎✎ NOTES
`` Depending on the disc or storage device, the
Tools menu may differ.
`` To enable the background music function, the
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
`` You can't enlarge the subtitle and PG graphic
in the full screen mode.
Appendix
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
No operation can be
performed with the remote
control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 6.1m from the
player.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• Press the P button (on front panel) for more than 5 seconds.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.
• Ensure that the disc has disc menus.
The prohibition message
appears on the screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
• You’ve requested a title or chapter number or search time that is out of
range.
Playing Photo Contents
You can control the playback of photo content
located on a Blu-ray disc, DVD, CD, USB
device, or your computer.
Using the Tools Menu
During playback, press the TOOLS button.
Troubleshooting
Start Slide
Show
Select to start the slide show.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
Rotate
Select to rotate the picture. (This
will rotate the picture either
clockwise or counter clockwise.)
The screen ratio cannot be
changed.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
Shows the picture information.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
Background
Music
Information
Select to listen to music while
viewing a slide show.
17
PROBLEM
The screen is blank.
Forgot password
SOLUTION
PROBLEM
• If the HDMI output is set to a resolution your TV cannot support (for example,
1080p), you may not see a picture on your TV.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
Video is played intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is
overloaded.
DLNA connection between
Player and PC is unstable.
• The IP address under the same subnetwork should be unique. If they are
not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don’t use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data is
deleted.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the player.
• Check if your TV supports 576p/480p, 720p, 1080i, or 1080p HDMI input
resolutions.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
• Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorised service centre.
DLNA function
I can see folders shared
through DLNA, but I cannot
see the files.
• DLNAs shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not
displayed.
BD-LIVE
SOLUTION
I cannot connect to the BDLIVE server.
• Check whether the network connection is working or not by using the
Network Status menu.
• Check whether the USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
• If all above fails, contact the contents provider or update the player to the
latest firmware.
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
✎✎ NOTES
`` When the factory default settings are restored, all stored user BD data is deleted.
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
1.
2.
An engineer is called out to your home at your request and there is no defect in the
product.
You bring the unit to a repair centre and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care before seeking to repair your player.
18
Specifications
General
USB
HDMI
Audio Output
Network
-----
Weight
1.0 Kg
Dimensions
269 (W) X 193 (D) X 39 (H) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Type A
USB 2.0
DC output
5V 0.5A Max.
Video
1080p, 1080i, 720p, 576p/480p
Audio
PCM, Bitstream
Digital Audio Output
Coaxial
Ethernet
100BASE - TX Terminal
Network speeds equal to or below 10Mbps are not supported.
Design and specifications are subject to change without prior notice.
For the power supply and power consumption, refer to the label attached to the player.
Weight and dimensions are approximate.
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
• Discs other than those listed above cannot be and are not intended to be played by this
player. Some of the discs listed above may not play due to one or more reasons provided
below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are
possible because:
-- Blu-ray is a new and evolving format and this player may not operate all features of Bluray Discs because some features may be optional, additional features may have been
added to the Blu-ray Disc format after the production of this player, and certain available
features may be subject to delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-- some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording conditions;
-- problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or
the manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care centre.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG
customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
19
• For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
• Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the
DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of
AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care centre.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks. When
a prohibitet use of an unauthorised copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology is
provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com.
To request additional information about Cinavia by email, send a postcard with your mailing
address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego CA, 92138,
USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance
Corporation. All right reserved by Verance. Reverse engineering or disassembly is prohibited.
20
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may not
use any content or services in a manner that has not been authorised by the content owner or
service provider. Without limiting the foregoing, unless expressly authorised by the applicable
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,
translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
Licence
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners
• Manufactured under licence under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
2.0+Digital Out
Reserved.
• Open Source Licence Notice
-- In the case of using open source software, Open Source Licences are available on the
product menu.
• DivX
-- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,
LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
-- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for
more information on how to complete your registration.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
• DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
• Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
21
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
1800-88-9999
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Area
` Middle East
U.A.E
OMAN
KUWAIT
BAHRAIN
Egypt
JORDAN
IRAN
Morocco
Saudi Arabia
` Africa
NIGERIA
Ghana
Cote D’ Ivoire
Senegal
Cameroon
KENYA
UGANDA
TANZANIA
SOUTH AFRICA
Contact Centre 
Web Site
800-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
183-2255
8000-4726
08000-726786
800-22273
021-8255
080 100 2255
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
BD-F5100
Blu-ray™ Disc 播放机
用户手册
用影像记录一切可能
感谢您购买此款 Samsung 产品。
为了获得更完善的服务,请在以下网站中注册您的产品
www.samsung.com/register
中国语
安全信息
安全信息
备时,本产品符合 CE 规定。要防止来自收音
机和电视 等电子设备的电磁干扰,请使用屏
蔽电缆和接头 进行连接。.
警告
安全信息
为减少电击的危险,请勿卸下机盖(或背面机盖)。
警告
内部没有用户可维修的部件。请让合格的维修人员进行维修
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
重要说明
重要说明
1 类激光产品
本设备的电源插头配备含保险丝的压模插头。
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
保险丝的值在插头的插脚面指示。如果需要
本设备的电源插头配备含保险丝的压模插头。 本压缩光盘播放器定为 1 类激光产品。如果
更换,必须使用经过 BS1362 核准的额定值相
保险丝的值在插头的插脚面指示。如果需要
您未按本手册的规定使用控制、调节或执行
注意事项
器功能
同的保险丝。 BS1362 核准的额定值
更换,必须使用经过
操作,则可能会遭受危险的激光辐射。
如果保险丝盖子可拆,那么在没有保险丝盖
为减少电击的危险,请勿卸下机盖(或背面机盖)。
相同的保险丝。
注意:
注意
有电击的危险,请勿打开。
重要安全说明
子的情况下,切勿使用插头。如果需要替换
内部没有用户可维修的部件。请让合格的维修人员进行维修。
如果保险丝盖子可拆,那么在没有保险丝盖
• 打开产品后,会发出 3B 类可见或不可见激
保险丝盖子,则其颜色必须与插头的插脚面
有电击的危险,请勿打开。
子的情况下,切勿使用插头。如果需要替换
例如 PC,
光辐射。应避免受到光束照射
(IEC 60825-1)
使用装置前请仔细阅读这些操作说明。请按
注意
注意: 为减少电击的危险,请勿卸下机
三角形内的感叹号是一个警告符 保险丝盖子,则其颜色必须与插头的插脚面
颜色相同。替换盖子可向经销商购买。 • 本产品使用激光。如果您未按本手册的规
ge] 设备)上的 三角形内的闪电和箭头是一个警告符
照下面列出的安全说明操作。
三角形内的闪电和箭头是一个警告符号, 注意:
为减少电击的危险,请勿卸下机 三角形内的感叹号是一个警告符号,
号,提醒您产品内含“危险电压”。
盖(或背面机盖)。内部没有用户可维
号, 提醒您产品随附的重要说
颜色相同。替换盖子可向经销商购买。
如果插头不适合家中的电源点,或者电线不够长,
定使用控制、调节或执行操作,则可能会
有电击的危险,请勿打开。
提醒您产品内含“危险电压”。
盖(或背面机盖)。内部没有用户可维修
提醒您产品随附的重要说明。
请将这些操作说明妥善保管,以供将来参考.
修 的部件。请让合格的维修人员进行
明。
如果插头不适合家中的电源点,或者电线不够长,
不能连接到电源点,那么必须购买合适的获遭受危险的激光辐射不要打开护盖,也不
的部件。请让合格的维修人员进行维修。
维修。
不能连接到电源点,那么必须购买合适的获
1. 请阅读这些说明。
要自行修理。请让合格的人员进行维修。
得安全批准的延长线,或者咨询经销商以获
三角形内的闪电和箭头是一
注意: 为减少电击的危险,请勿
三角形内的感叹号是一个
得安全批准的延长线,或者咨询经销商以获
不要将本产品安装在狭窄的空间中,例如书
注意
得帮助。
个警告符号,提醒您产品内
卸下机盖(或背面机盖)。内部
警告符号,提醒您产品随
SB 存储设备上 不要将本产品安装在狭窄的空间中,例如书
2. 请妥善保管这些说明。
如果被其直射,可能会处于危险的辐射之中。得帮助。
LASER PRODUCT
含“危险电压”。
没有用户可维修的部件。 请让合 附的重要说明。
、DivX 等等)。 橱或类似的装置中。
但是,如果除了剪断插头以外别无他法,请 CLASS 1
本产品使用激光。如果不按此处规定的控制、
橱或类似的装置中。
请务必根据指示正确操作 Blu-ray 光盘播放机 但是,如果除了剪断插头以外别无他法,请
3. 1注意所有警告。
KLASSE
LASER PRODUKT
格的维修人员进行维修。
取出保险丝,然后安全地弃置插头。不要将
调校或操作过程进行操作,则可能会处于危
警告
取出保险丝,然后安全地弃置插头。不要将
LUOKAN
1
LASER LAITE
4. 请遵循所有说明。
插头连接至电源插孔,因为裸露的活动电线
险的辐
警告
注意 射之中。不要打开盖子,也不要自行 插头连接至电源插孔,因为裸露的活动电线
KLASS 1
LASER APPARAT
不要将本产品安装在狭窄的空间中,例如书
注意
存在电击的风险。
为避免可能导致火患或电击危险的损害,
5.
切勿在近水处使用本设备。
修理。请让合格的人员进行维修。
存在电击的风险。
PRODUCTO LÁSER CLASE 1
橱或类似的装置中。
请勿将此产品放在在雨中或潮湿环境下。
为避免可能导致火患或电击危险的损害,
本产品使用激光。如果不按此处规定的控制、
要使装置与电源断开连接,必须从电源插座
当使用屏蔽电缆和接头将装置连接至其他设
6. 清洁时只使用干布。
要使装置与电源断开连接,必须从电源插座
光盘播放机使用不可见的激光光线,如果
Blu-ray
请勿将此产品放在在雨中或潮湿环境下。.
拔出插头,因此,电源插头必须易于操作。
调校或操作过程进行操作,则可能会处于危
备时,本产品符合
CE 规定。要防止来自收音
拔出插头,因此,电源插头必须易于操作。
被其直射,可能会处于危险的辐射之中。
请务必
注意
警告
7. 请勿堵塞任何通风口。根据厂商说明进
险的辐 射之中。不要打开盖子,也不要自行
等电子设备的电磁干扰,请使用屏
机和电视
附带提供本用户手册的产品装置获得特定第
根据指示正确操作
附带提供本用户手册的产品装置获得特定第
Blu-ray 光盘播放机。
行安装。
注意
修理。请让合格的人员进行维修。
进行连接。
蔽电缆和接头
三方的特定知识产权许可。.
Blu-ray 光盘播放机使用不可见的激光光线,
为避免可能导致火患或电击危险的损害,请勿将
三方的特定知识产权许可。
8.
不要将本设备安装在任何靠近热源例如
如果被其直射,可能会处于危险的辐射之中。
此产品放在在雨中或潮湿环境下。
当使用屏蔽电缆和接头将装置连接至其他设
Blu-ray 光盘播放机使用不可见的激光光线,
电暖炉、暖气片、电炉,或其它(包括
请务必根据指示正确操作 Blu-ray 光盘播放机。
1 类激光产品
为减少电击的危险,请勿卸下机盖(或背面机盖)。
警告
内部没有用户可维修的部件。请让合格的维修人员进行维修。
注意
汉文
仅适用于海拔2000m以下地区安全使用。
蒙古文
藏文
维文
壮文
Hai dou gaxgonq, wngdang sien duenh denvasen bae.
汉文
仅适用于非热带气候条件下安全使用。
蒙古文
藏文
维文
壮文
|
2 2
中国语
Dan hab yungh youq gij dienheiq diuzgen mbouj dwg diegndat haenx ancienz sawjyungh.
本压缩光盘播放器定为 1 类激光产品。如果
您未按本手册的规定使用控制、调节或执行
操作,则可能会遭受危险的激光辐射。.
注意:
• 打开产品后,会发出 3B 类可见或不可见激
光辐射。应避免受到光束照射 (IEC 60825-1)
• 本产品使用激光。如果您未按本手册的规
定使用控制、调节或执行操作,则可能会
遭受危险的激光辐射不要打开护盖,也不
要自行修理。请让合格的人员进行维修。
9.
AV 接收器)会产生热气的设备。
请勿忽略极化或接地型插头的安全保护
用途。极化型插头具有两边,有一边较
另一边宽。接地型插头具有两边和第三
端接地插脚。该宽边或第三端插脚专为
您的安全而提供。如果所提供的插头不
适用于您的插座,请联系电工更换旧插
座。
10. 保护电线以防践踏或被挤压,特别是插头
处、便利插座处以及设备接出处的电线。
11. 只使用厂商指定的附加装置/附件。
12. 仅可使用厂商指定或
随设备出售的运载
车、支架、三脚架、
支架或工作台。使用
运载车时,请小心避
免在移动运载车/设备
组合时翻覆。
13. 在雷雨天气或长时间不用的情况下,请
拔下本设备的插头。
14. 所有维修均应由合格的维修人员执行。
设备在具有任何方式的损坏时需要维修
服务,例如以下情况:电源线或插头损
坏、设备内溅入液体或落入杂物、设备
曾淋雨或浸水无法正常操作,或是跌落.
光盘储藏和管理
• 拿取光盘
- 光盘上的指纹或划痕可能
会降低声音和图像质量,
或者导致跳过某些内容
- 避免触摸已录有数据光盘的表面。
- 拿取光盘的边缘,使得指纹不会留在表
面上。
- 不要在光盘上贴纸片或胶带.
• 清洁光盘
- 如果光盘上有指纹或灰尘,
请以用水稀释的温和清洁剂
清洁,然后以柔软的布料擦
拭。
- 清洁时,请轻柔地从光盘
内部到外部擦拭。
• 光盘储藏
` 不要放在阳光直射处。
` 应放在阴凉通风处。
` 放在干净的保护套内并垂直存放。
处理注意事项
• 不要将本设备置于滴水或溅水的地方。不
要将装有水的物件(如花瓶)放在装置上
面。
• 在完全关闭本装置,必须将电源插头从墙
上插座中拔出。因此,电源插头必须始终
方便拔插。
• 不要将多个电子设备插入到同一个墙上插
座中。插座过载会导致它过热,从而导致
火灾。
• 机壳维护。
- 在将其它组件连接到播放器之前,请务
必先将其它组件关闭。
- 如果突然将播放器从很冷的地方移到很
暖和的地方,操作部件和镜头可能会产
生冷凝,从而导致光盘播放异常。如果
发生这种情况,请将播放器断电并等待
两个小时,然后再将插头连接至电源插
座。然后插入光盘并再次尝试播放。
• 如果产生发出异常噪声或发出烧焦味或冒
烟,请立即关闭电源开关,并从墙上插座
拔下电源插头。然后,与您最近的客户服
务中心联系,以获得技术协助。不要使用
产品。照常使用产品可能会导致火灾或电
击。
目录
安全信息
语言 .......................................................... 13
警告 ............................................................ 2
安全 .......................................................... 13
光盘储藏和管理 .......................................... 3
支持 .......................................................... 13
注意事项 ..................................................... 2
常规 .......................................................... 13
处理注意事项 .............................................. 3
媒体播放
版权 ............................................................ 3
开始使用
播放商业录制的光碟 ................................. 14
播放 USB 裝置上的档案............................ 14
在使用用户手册之前 ................................... 4
播放含有用户烧录内容的光盘 ................... 15
附件 ............................................................ 6
控制视频播放 ............................................ 15
后面板 ......................................................... 6
播放照片内容 ............................................ 17
播放器可播放光盘的徽标 ............................ 4
播放位于 PC 中的內容 .............................. 15
前面板 ......................................................... 6
控制音乐播放 ............................................ 16
遥控器 ......................................................... 7
附录
连接
故障排除 ................................................... 17
连接至电视.................................................. 7
规格 .......................................................... 19
连接至音频系统 .......................................... 8
连接至网络路由器 ....................................... 8
设置
版权
© 2013 Samsung Electronics Co.,Ltd.
版权所有;如果没有得到 Samsung Electronics
Co.,Ltd. 的书面允许,严禁转化或复制本用户
手册的任何部分或整本用户手册。
初始设置过程 .............................................. 9
菜单导航 ..................................................... 9
访问设置菜单 .............................................. 9
显示 ............................................................ 9
音频 .......................................................... 10
网络 .......................................................... 11
系统 .......................................................... 12
3
播放器和光盘都是按地区编码的。
此类地区编码必须与要播放的光盘相匹配。
如果编码不匹配,光盘将无法播放。
此播放器的“地区编号”位于播放器的后面
板上。
在使用用户手册之前
播放器可播放的光盘类型和内容
媒体
光盘类型
Blu-ray 光盘
视频
音乐
照片
✎
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R、
DVD-RW/-R、
BD-RE/-R
CD-RW/-R、
DVD-RW/-R、
BD-RE/-R
详细信息
以 BD-RE 格式录制的 BD-ROM 或 BD-RE/-R。
DVD-VIDEO、已录制且已最终化的已录制 DVD+RW/DVDRW(V)/
DVD-R/+R,或者包含 DivX、MKV、MP4 内容的 USB 存储介
质。
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 存储介质上录
制的包含 MP3 或 WMA 内容的音乐。
播放器无法播放的光盘类型
4
光盘类
地区代码
型
Blu-ray
光盘
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 存储介质上录
制的包含 JPEG 内容的照片。
注意
` 由于光盘类型或录制条件,播放器可能无法播放某些 CD-RW/-R 和 DVD-R。
` 如果未以 DVD 格式正确录制 DVD-RW/-R,则它将不可播放。
` 如果内容在录制到 DVD-R 上时的采样率超过 10 Mbps,那么播放器将无法播放此内
容。
` 如果内容在录制到 BD-R 或 USB 设备上时的采样率超过 25 Mbps,那么播放器将无
法播放此内容。
` 对于某些类型的光盘,或者使用特定功能(例如更改视角和调整宽高比)时,播放功能
可能不起作用。光盘的相关信息在光盘盒上详细说明。如果需要,请参阅此信息。
` 播放 BD-J 标题时,加载时间可能比普通标题长一些,一些功能可能运行速度较慢。
• HD DVD
• DVD-ROM/PD/
MV 等等
播放器可播放光盘的徽标
地区代码
开始使用
• DVD-RAM
• 超级音频 CD
(CD 层除外)
• DVD-RW(VR 模式) • 用于创作的 3.9 GB
DVD-R。
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-G 只能播放
音频,不能播放视
频。)
DVDVIDEO
Blu-ray 光盘
BD-LIVE
DivX
英国、法国、德国
等国家/地区中的
PAL 广播制式
地区
a
北美洲、中美洲、南
美洲、韩国、日本、
台湾、香港和东南
亚。
b
欧洲、格陵兰、法国
未成为省的领土、中
东、非洲、澳大利亚
和新西兰。
c
印度、中国、俄罗
斯、中亚和南亚。
1
美国、美国未成为省
的领土和加拿大。
2
欧洲、日本、中东、
埃及、南非和格陵兰
3
台湾、韩国、菲律
宾、印度尼西亚和香
港
4
墨西哥、南美洲、中
美洲、澳大利亚、新
西兰、太平洋群岛和
加勒比
5
俄罗斯、东欧、印
度、非洲大部分地
区、北朝鲜和蒙古
6
中国
支持的文件格式
USB 连接注意事项
• 播放器支持 USB 存储介质、MP3 播放
器、数码相机和 USB 读卡器。
• 此播放器不支持超过 128 个字符的文件夹
名称或文件名称。
• 一些 USB, 不支持外部 HDD, 或数码相机
设备可能与此播放器不兼容。
• 播放器支持 FAT16、FAT32 和 NTFS 文件
系统。
• 将 USB 设备直接连接到播放器 USB 端
口。
通过 USB 电缆连接可能会导致兼容性问
题。
• 将多个内存设备连接到多卡读卡器中,可能
导致读卡器无法正常操作。
• 播放器不支持 PTP 协议。
• 在“加载”过程中不要断开 USB 设备连
接。
• 图像分辨率越大,显示延迟的时间越长。
• 此播放器无法播放从商业网站下载的带
有 DRM(数字版权管理)功能的 MP3 文
件。
• 播放器仅支持 30fps(每秒幀数)以下的视频。
• 播放器仅支持闪盘和 USB HDD。(不支持 HUB。)
• 某些 USB HDD 设备、多卡读卡器和闪盘可能与本播放器不兼容.
• 如果某 USB 设备需要额外的电源,则它可能会受到电路安全设备限制。
• 如果从 USB HDD 播放不稳定,请通过将 HDD 插入到墙上插座中来提供额外的电源。
如果问题仍然存在,请与 USB HDD 制造商联系。
• 必须使用“安全移除 USB”功能移动 USB 存储设备,以避免可能损坏 USB 存储器。
按 HOME 按钮移至主屏幕,按黄色 (C) 按钮,然后按 v 按钮。
• 对于任何数据文件损坏或数据丢失,SAMSUNG 概不负责。
• 播放器不支持 NTSF 压缩的文件、备用文件或加密的文件。.
• 您可以在台式计算机上修复或格式化 USB 设备。(仅限 MS-Windows 操作系统).
视频文件支持
文件扩展名
容器
*.avi
AVI
*.mkv
MKV
*.wmv
WMV (wmv9)
*.mp4
MP4
*.mpg
*.mpeg
PS
视频编解码器
音频编解码器
分辨率
DivX 3.11/4.x/5.1/6.0
MP3
Dolby Digital
DTS
WMA
PCM
1920x1080
MP4v3
H.264 BP/MP/HP
VC-1 AP
DivX 5.1/6.0
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
1920x1080
1920x1080
1920x1080
• 限制
- 即使文件是使用上面提到的受支持编解码器来编码,如果其内容有问题的话,
也无法播放。
- 如果文件的容器信息错误,或者文件本身损坏,则不能保证可以正常播放。
- 位速率/ 帧速率高于标准的文件在进行声音/ 视频播放时可能会断断续续。
- 如果文件的索引表损坏,则寻找(跳过)功能不可用。.
• 视频解码器
- 最高支持 H.264 Level 4.1和 AVCHD
- 不支持 H.264 FMO/ASO/RS、和 VC1 SP/MP/AP L4
- XVID、MPEG4 SP、ASP :
低于 1280 x 720 : 最高 60 帧
高于 1280 x 720 : 最高 30 帧
- 不支持 GMC 2 或更高版本。
• 音频解码器
- 支持 WMA 7、8、9 和 STD
- 不支持 22050Hz 单声道的 WMA 采样率。
- AAC: 最高取样率: 96Khz(8、11、12、16、22、24、32、44.1、48、64、88.2、
96) 最高位元速率: 320kbps。
1920x1080
音乐文件支持
1920x1080
文件扩展名
容器
音频编解
码器
*.mp3
MP3
MP3
-
WMA
* 采样率 (kHz) – 8、11、16、22、32、44.1、48
* 比特率 – 5kbps 到 384kbps 范围内的所有比特率
1920x1080
1920x1080
1920x1080
1920x1080
*.wma
1920x1080
图片档案支持
1920x1080
1920x1080
WMA
支持范围
文件扩展名
类型
分辨率
*.jpg
*.jpeg
*.jpe
JPEG
15360x8640
PNG
15360x8640
*.png
5
AVCHD (Advanced Video Codec High Definition)
前面板
• 本产品可以播放 AVCHD 格式的光盘。 这些光盘通常在摄录机中录制和使用。
播放/暂停按钮
• AVCHD 格式是高清晰度数字视频摄像机格式。
• MPEG-4 AVC/H.264 格式压缩图像的效率高于常用的图像压缩格式的效率。
停止按钮
• 一些 AVCHD 光盘使用 “x.v.Color” 格式。
• 本产品可以播放使用 “x.v.Color” 格式的 AVCHD 光盘。
打开/关闭按钮
• “x.v.Color” 是 Sony Corporation 的商标。
• “AVCHD” 和 AVCHD 徽标是 Matsushita Electronic Industrial Co., Ltd. 和 Sony
Corporation 的商标.
✎
电源按钮
注意
` 一些 AVCHD 格式的光盘可能无法播放,具体视录制条件而定。
AVCHD 格式的光盘需要最终化。
` “x.v.Color” 提供的颜色范围比普通 DVD 摄录机光盘宽。
` 一些 DivX、MKV 和 MP4 格式的光盘可能无法播放,具体视光盘分辨率和帧速条件而
定。.
USB HOST
附件
光盘托架
检查下面列示的随附附件。
✎
遥控器感应器
注意
` 播放器显示“Blu-ray 光盘”菜单时,此刻按下播放器或遥控器上的“播放”按钮不能
开始播放电影。要播放电影,必须在光盘菜单中选择“播放电影”或“开始”,然后
按 v 按钮.
` 使用带有 USB 闪存棒的 USB Host 插孔即可完成软件升级。.
后面板
HDMI 线缆
6
遥控器电池(AAA 型)
用户手册
遥控器
HDMI OUT
LAN
DIGITAL AUDIO OUT
遥控器
遥控器
连接
遥控器一览
连接至电视
打开和关闭产品。
打开和关闭电视。
设置后,可让您设置电视上的输入源。
电视音量调整
打开和关闭光盘托架。
将 HDMI 电缆 从产品背面的 HDMI OUT 插孔连接至电视上的 HDMI IN 插孔。
- 在连接好所有其他接线之前,不要将电源线连接至墙上插座。
- 更改连接时,请先关闭所有设备再开始。
按数字按钮可以操作选项。
使用此按钮可以进入弹出菜单/标题菜单。
按此按钮可以进入光盘菜单。
按下可停止光盘。
按此按钮可以暂停光盘。
按下可播放光盘 。
按此按钮可以移至主菜单。
按此按钮可以切换 Blu-ray 光盘/DVD 的字
幕语言。
使用此按钮要以访问光盘(Blu-ray 光盘/
DVD)上的各种音频功能。
使用此按钮可以在播放 Blu-ray/DVD 光盘期
间显示播放信息。
按此按钮可以使用工具菜单。
✎
选择菜单项和更改菜单值。
按此按钮可以退出菜单。
返回到上一个菜单。
这些按钮不但可用于产品上的菜单,而且可
用于多个 Blu-ray 光盘功能。
按此按钮可以使用 Bonusview 功能。
按此按鈕可 使用全螢幕 功能;在 bluray
光碟/DVD 播放期間,此功能不起 作用。
可让您重复标题、章节 A-B。
安装电池
音频
视频
按此按钮可以向后或向前搜索光盘。
按此按钮可以向后或向前跳过。
可让您重复标题、章节、曲目或光盘。
✎
!
注意
` 如果遥控器无法正常操作:
• 检查电池的极性 (+/–)。
• 检查电池是否已放完电。
• 检查遥控器感应器是否被障碍物挡住.
• 检查附近是否有荧光灯照明.
注意
` 根据当地环境法规处置电池。切勿将其放
入家庭垃圾。.
注意
` 如果您使用 HDMI 至 DVI 电缆来连接至显示设备,则还必须将播放器上的 Digital Audio
Out 连接至音频系统才能听到声音。
` HDMI 电缆会输出数字视频和音频,因此不需要连接音频电缆。
` 根据电视,某些 HDMI 输出分辨率可能不起作用。请参阅电视的用户手册。
` 使用 HDMI 将播放器连接至电视或新电视,然后第一次打开它时,播放器会自动将
HDMI 输出分辨率设置为电视支持的最高分辨率。
` HDMI 电缆过长时,可能会导致屏幕噪讯。如果发生这种情况,请在菜单中将 HDMI
Deep Colour(HDMI 深色)设置为“关闭”。
` 要以 HDMI 720p、1080i 或 1080p 输出模式查看视频,必须使用高速(类别 2)HDMI
电缆。
` HDMI 仅将纯数字信号输出至电视。
如果您的电视不支持 HDCP(高带宽数字内容保护),屏幕上会出现随机噪讯。
7
连接至音频系统
连接至网络路由器
您可以使用下面说明的其中一种方法,将 Blu-ray 播放器连接至音频系统。
- 在连接好所有其他接线之前,不要将电源线连接至墙上插座。
- 更改连接时,请先关闭所有设备再开始.
可以使用下面说明的其中一种方法,将播放器连接至网络路由器。
要使用 DLNA 网络功能,必须将计算机连接至网络,如图中所示。.
有线网络
方法 1 连接至支持 HDMI 的 AV 接收器
• 将 HDMI 电缆 从产品背面的 HDMI OUT 插孔连接至接收器上的 HDMI IN 插孔。
• 最佳质量(建议)
方法 2 连连接至支持 Dolby Digital 或 DTS 解码器的 AV 接收器
• 使用数字同轴电缆(未提供),将产品上的“同轴数字音频输出”插孔连接至接收器的“数字
同轴输入”插孔。
• 一般质量
• 当将“数字输出”设置为 PCM 时,只能通过前面两扬声器听到声音。.
或
宽带调制解调器
(含有集成路由器)
宽带服务
路由器
宽带调制解调器
宽带服务
方法 1
方法 2
音频
音频
✎
注意
` 可能无法通过互联网访问 Samsung 的软件升级,具体视所用的路由器或 ISP 的政策而定。有
关更多信息,请与您的 ISP(Internet 服务提供商)联系。.
` 对于 DSL 用户,请使用路由器来建立网络连接。.
8
设置
初始设置过程
• 如果您未配置初始设置,Home 菜单不
会出现。
• 升级软件版本后,播放器中的 OSD(屏
幕显示)可能会更改。
• 访问步骤可能会因选择的菜单而异。
• 此产品的 载入 程序完成之后, 可以操作
面板按钮和遥控器。
“初始设置过程”可让您设置 OSD 和菜单语言、
配置与家庭网络连接、选择适合电视的高宽比
输出(屏幕大小和格式)。
✎
注意
` 如果不按下面所述配置初始设置,则
主菜单不会出现。.
` 如果在网络设置期间按蓝色 (D) 按
钮,则可以访问主菜单,即使尚未完
成网络设置也是如此.
` 返回到主菜单时,会自动取消全屏幕
模式.
` 如果再次要显示初始设置屏幕以进行
更改,请在未插入光盘的情况下按产
品前面板上的停止 @ 按钮超过 5 秒
钟。这会将播放器重设为其默认设置.
` 此产品的 载入 程序完成之后,随即可
以操作 HDMI-CEC 功能。.
` 如果要使用 Anynet+(HDMI-CEC) 功
能,请遵循下面的说明操作。.
1) 使用 HDMI 电缆将播放机连接
至 Anynet+(HDMI-CEC) 兼容的
Samsung 电视。
2) 在电视和播放器上将
Anynet+(HDMI-CEC) 功能设置为
“开”.
3) 将电视设置为初始设置过程。
` 如果播放器保留在停止模式超过 5 分
钟未使用,则电视上会出现屏幕保护
程序。如果播放器保留在屏幕保护程
序模式超过 25 分钟,则电源会自动
关闭。
1
选择 音乐。
显示
2
选择 设置。
3
显示可用的按钮。
可以配置各种显示选项,例如电视高宽比、
分辨率等。
4
选取应用程式
电视屏幕比例
5
选择 视频。
6
选择 照片。
根据所拥有的电视的类型,您可能要调整屏
幕大小设置。
✎
菜单导航
✎
1
注意
` Videos(视频)、Photos(相片)和
Music(音乐)选项需要您將相应的光
碟放入播放 机 中,或將 USB 快闪 裝
置连接到播放机。
3
2
访问设置菜单
4
1
HOME 按钮:按此按钮可移至主菜
单。
2
返回按钮:返回到上一个菜单。
3
v 确认/方向按钮:
移动光标或选择项目。
激活当前选中的项目。
确认设置。
4
退出按钮:按此按钮可以退出当前
菜单。
3.
6
1
照片
音乐
设置
2
5
4
App 1
无光盘
a 更改设备
d 查看设备
1.
2.
• 主菜单
视频
要访问“设置”菜单和子菜单,请按照下面
的步骤操作 :
" 确认
3
4.
按电源按钮。
主菜单将会出现。
按 ◄► 按钮选择设置,然后按确 v
按钮。
按 ▲▼ 按钮选择所需的子菜单,然
后按 v 按钮。
按 ▲▼ 按钮选择所需的项目,然后
按 v 按钮。
5. 按 退出按钮退出菜单。
✎
注意
` 访问步骤可能会因选择的菜单而异。
升级软件版本后,播放器中的 OSD
(屏幕显示)可能会更改。
注意
` 根据光盘类型,一些屏幕比例可能不
可用。
` 如果选择不同于电视屏幕的屏幕比例的
屏幕比例和选项,则图像可能会变形。
BD Wise (仅限 Samsung 播放器)
BD Wise 是 Samsung 最新的互连功
能。
如果使用 BD Wise 将 Samsung 播放器和
Samsung 电视用 HDMI 互相连接,且 BD
Wise 在播放器和电视上都打开,播放器将
以 Blu-ray 光盘/DVD 的视频分辩率和帧率
输出视频。
✎
注意
` BD Wise 打开时,“分辨率”设置自动
默认为 BD Wise,“分辨率”菜单中将
显示 BD Wise。
` 如果将播放器连接至不支持 BD Wise 的设
备,则不能使用 BD Wise 功能。
` 为了使 BD Wise 正确操作,请在播放器
和电视上将 BD Wise 菜单设置为开。
分辨率
可以将和 HDMI 视频信号的输出分辨率
设置为 自动、1080p、1080i、720p、或
576p/480p 。数字表示每帧视频的行数。i 和
p 分别表示隔行和逐行扫描。行数越多,质
量越高。
9
✎
根据输出模式的分辨率
• Blu-ray 光盘/E-contents/数字内容播
放
输出
设置
HDMI/已连接
HDMI 模式
Blu-ray
光盘
E-contents/
数字内容
BD Wise
Blu-ray 光
盘分辨率
1080p
自动
电视输入最
大分辨率
电视输入最
大分辨率
1080@60F
(电影帧:
关)
1080@60F
1080@60F
电影帧:
自动
(24Fs)
1080@24F
1080@24F
1080i
1080i
1080i
720p
720p
720p
576p/480p
576p/480p
576p/480p
• DVD 播放
输出
设置
HDMI/已连接
HDMI 模式
BD Wise
576i/480i
自动
电视输入最大分辨率
1080p
1080p
1080i
1080i
720p
720p
576p/480p
576p/480p
10
注意
` 如果播放器连接的电视不支持电影帧或
选择的分辨率,则消息“如果在选择
“是”后未显示图片,请等待 15 秒返
回先前分辨率。是否更改分辨率?”将
会出现。
如果选择是,电视屏幕将会空白 15
秒,分辨率将自动还原到先前值。
` 如果更改分辨率后屏幕仍然空白,则
取下所有光盘,然后按下播放器前面
的 播放/暂停按钮 @ 按钮并保持 5 秒
以上。所有设置都将恢复为出厂默认
值。按照上一页中的步骤访问每种模
式并选择电视支持的电视设置。
` 恢复出厂默认设置时,将会删除所有
存储的用户 BD 数据。
` Blu-ray 光盘必须具有 24 帧功能,播
放器才能使用 电影帧 (24Fs)模式。
渐进模式
观看 DVD 时,设置为此项可以提高画面质量。
音频
数字输出
可让您选择适合电视或 AV 接收器的数字音频输出格式. 有关详情,请参阅“数字输出选择”表。
数字输出选择
设置 HDMI 输出的色空间格式,与相连设备
(电视、显示器等)的功能匹配。
从 HDMI OUT 插孔带深色输出视频。深色实
现颜色深度更深的精确颜色重现。
PCM
PCM 2 声道
重新编码 DTS
PCM 2 声道 PCM 2 声道 杜比数码
杜比数码
重新编码 DTS
Dolby Digital
Dolby
PCM 2 声道 PCM 2 声道
Plus
Digital Plus
杜比数码
重新编码 DTS
最多 7.1 声道 PCM 2 声道
HDMI 接收器或 支持 HDMI 的 AV
同轴
接收器或同轴电缆
重新编码 Dolby
Digital*
重新编码 Dolby
Digital*
重新编码 Dolby
Digital*
重新编码 Dolby
Digital*
重新编码 Dolby
Digital*
PCM 2 声道 PCM 2 声道
Dolby
TrueHD
杜比数码
重新编码 DTS
DTS
PCM 2 声道 PCM 2 声道
DTS
DTS
重新编码 DTS
DTSHD High
Resolution
Audio
PCM 2 声道 PCM 2 声道
DTSHD High
Resolution
Audio
DTS
重新编码 DTS
重新编码 Dolby
Digital*
重新编码 DTS
重新编码 Dolby
Digital*
PCM 2 声道
PCM 2 声道
杜比数码
杜比数码
PCM
杜比数码
DTS
Blu-ray 光
盘的清晰
度
同轴电缆
Dolby
TrueHD
DTS-HD
Master
Audio
DVD 上的
音频流
源码
源码
(DTS 重新编码) (Dolby D 重新编码)
同轴电缆
杜比数码
Blu-ray 光
盘上的音
频流
源码
(未处理)
HDMI
接收器
PCM
HDMI 颜色格式
HDMI 深色
HDMI
接收器
连接
电影帧 (24Fs)
将 电影帧 (24Fs)功能设置为 自动,可以将播
放器的 HDMI 输出调整为每秒 24 帧,从而
提高画面质量。
只能在支持此帧速率的电视上使用 电影帧
(24Fs)功能。只有播放器处于 HDMI 1080p
输出分辨率模式时才可选择电影帧。.
PCM
设置
任意
DTS-HD
Master
DTS
Audio
PCM 2 声
PCM 2 声道 PCM 2 声道
PCM 2 声道
道
PCM 2 声道 PCM 2 声道
PCM 2 声道 PCM 2 声道 杜比数码
PCM 2 声道 PCM 2 声道
DTS
杜比数码
DTS
仅输出主要特征音频流,
将主要特征音频和
因此 AV 接收机可以解码
BONUSVIEW 音频流一起解码
音频源码。
为 PCM 音频,并添加“导航
您将听不到 BONUSVIEW 音
声音效果”。
频和 “导航声音效果”。
DTS
DTS
将主要特征音频和 将主要特征音频
BONUSVIEW 音频流 和 BONUSVIEW 音频
一起解码为 PCM 音 流一起解码为 PCM
频,并添加“导航 音频,并添加导航
声音效果”,然后 声音效果,然后将
将 PCM 音频重新编 PCM 音频重新编码为
码为 DTS 源码。
Dolby Digital 源码
* 如果源流为 2ch,则不会应用“Dolby D 重
新编码”。
Blu-ray 光盘可能包括三种音频流:
- 主要特征音频:具有主要特征的音频音轨。
- BONUSVIEW 音频:导演或学员评论等附加
音轨。
- 导航声音效果:选择一些菜单导航时,可能
会发出导航声音效果。导航声音效果在每张
Blu-ray 光盘上是不相同的。
✎
注意
` 请务必选择正确的 数字输出,否则
将听不到声音,或者听到很大声的噪
讯。
` 如果 HDMI 设备(AV 接收器、电视)
与压缩格式 (Dolby digital、DTS) 不兼
容,则音频信号输出为 PCM。
` 一般 DVD 没有 BONUSVIEW 音频和导
航声音效果。
PCM 向下取样
可让您选择将 96Khz PCM 信号向下取样为
48Khz,然后再将它们输出至放大器如果放大器或
接收器与 96Khz 信号不兼容,请选择“开”。
可让您将动态范围控制应用于 Dolby Digital、
Dolby Digital Plus 和 Dolby True HD 音频。
• 自动:根据 Dolby TrueHD 声道中的信息,
自动控制 Dolby TrueHD 音频的动态范围。
对于 Dolby Digital 和 Dolby Digital Plus,
还会打开动态范围控制。.
• 关:让动态范围保持不压缩状态,以让您听到
原始的声音。
• 开:对于所有三种杜比格式,打开动态范
围控制。声音越安静则越大声,并会降低
大声的音量。
缩混模式
` 如果播放 MPEG 音频音轨,则音频信
号会输出为 PCM,而不管音频输出选
择为何(PCM 或Beatstream)。
可让您选择与立体声系统兼容的多声道混缩方
法。可以选择让播放器混缩为普通立体声或兼
容环绕立体声。
` 如果电视与超过 48kHz 的 PCM 采样率不
兼容,则播放器可能会输出 48kHz 向下
取样的 PCM 音频,即使将 PCM 向下取样
设置为关也是如此。
✎
注意
` 只能通过有线连接将本装置连接至网
络.
动态范围控制
` 一些 Blu-ray 光盘没有 BONUSVIEW 音
频和导航声音效果。
` 如果电视与压缩多声道格式 (Dolby Digital,
DTS) 不兼容,则播放器可能会输出 PCM
2 声道缩混音频,即使在菜单上设置了
Beatstream (re-encoded 或 未处理)也是如
此。
如果它是静态的,则必须使用手动设置过
程。
遵循下列步骤来配置网络设置。
有线网络设置
1.
2.
3.
按 ▲▼按钮选择 网络,然后按 v 按
钮.
按 ▲▼ 按钮选择网络设置,然后按
v 按钮. 有线网络设置 屏幕将会出
现。
开始之前,请与您的 ISP 联系以了解您的
IP 地址是静态的还是动态的。如果它是动态
的(在大部分情况下如此),则建议您使用
“自动”网络设置过程。 此过程最简单,并
且在大部分情况
下都可用。
有线网络设置
显示
互联网协议设置
音频
IP 地址
网络
子网掩码
系统
网关
语言
安全 DNS
常规
DNS 服务器
支持
网络
4.
> 移动
: 自动
: 0
0
0
0
: 0
0
0
0
: 0
: 自动
: 0
0
0
" 选择
0
0
\
0
0
' 返回
在 Internet 协议动置 字段中,如果未
选择 自动,则予以选择。(按 v 选
择 自动,然后按 确认。) 然后按 v
按钮。)
5. “自动”功能会自动获取并填写 IP 地
址、子网掩码 等的值。
✎
6.
8.
选择 网络测试,然后按 v 以确保播放
器已连接至网络。
网络测试 完成之后,按 返回 两次以返回
到主菜单。
9. 如果网络功能不能获取网络值或者您选
择手动,请转至“手动设置”的指示.
手动网络设置
在主菜单中,按 ◄► 按钮选择 设置,
然后按 v 按钮.
设置
7.
注意
在开始手动网络设置之前,需要准备网络设
置值。
要将网络设置输入到产品中,请按照下面的
步骤操作:
1.
在主菜单中,按 ◄► 按钮选择 设置,
然后按 v 按钮.
2.
按 ▲▼按钮选择 网络,然后按 v 按
钮.
3.
按 ▲▼ 按钮选择网络设置,然后按 v
按钮. 有线网络设置 屏幕将会出现。
4. 在 Internet 协议设置屏幕上,按 v 按
钮.
5.
按 ▲▼ 按钮选择手动,然后按 v 按
钮.
6.
按 ▼ 按钮转至第一个输入字段
(IP 地址)。
7. 使用遥控器上的数字按钮输入数字。
8.
完成每个字段后,使用 ► 按钮相继地
移至下一个字段。
还可以使用其他箭头按钮来上移、下移
和返回。
` 此过程最多可能需要 5 分钟。
在网络功能获取网络值之后,按返回按
钮。
11
9.
输入 IP 地址、 子网掩码和网关值。.
10. 按 ▼ 按钮转至 DNS。
11. 按 ▼ 按钮转至第一个 DNS 输入字段。
12. 如上面所示输入数字。
13. 按遥控器上的返回按钮。
14. 运行网络测试以确保产品已连接至网络
网络测试
使用此菜单来连接到有线网络或检查网络连
接是否正常工作。
手动网络设置
检查是否已建立与网络和 Internet 的连接。
使用 BD-LIVE™
旦将播放器连接至网络,就可以使用符合
BD-LIVE 的光盘欣赏各种与电影相关的服务
内容。
1. 将 USB 内存棒连接到播放器侧面的
USB 插孔,然后检查剩余内存空间。存
储设备至少必须有 1GB 可用空间才能容
纳 BD-LIVE 服务。
2. 插入支持 BD-LIVE 的 Blu-ray 光盘。
3. 从光盘制造商提供的各种 BD-LIVE 服务
内容中选择一个项目。
✎
` 使用 BD-LIVE 的方式和提供的内容可
能会因光盘制造商而异。
使用 DLNA 功能
选择在您使用 BD-LIVE 服务时是否允许
Internet 连接.
• 允许(全部) : 对所有 BD-LIVE 内容允许
Internet 连接。
• 允许(仅限有效) : 仅对包含有效证书的 BDLIVE 内容允许 Internet 连接。
借助 DLNA,您可以在播放器上播放个人计
算机、 兼容手机或 NAS 设备上的音乐、视
频和照片文件。
要在播放器上使用 DLNA,必须将播放器连
接到网络(请参阅第 11~12 页)。
要在计算机上使用 DLNA,必须在计算机上
安装 DLNA 软件。
如果您有 兼容手机或 NAS,那么无须其它
软件即可使用 DLNA。
✎
注意
` 什么是有效证书?
当产品使用 BD-LIVE 来将光盘数据和请
求传送至服务器以认证光盘时,服务器
使用传送的数据来检查光盘是否有效并
将证书发送回给产品。
` 使用 BD-LIVE 内容时,Internet 连接可
能会受到限制。
12
4. 访问 www.samsung.com。
5. 单击“服务中心”>“下载中心”,在
出现的字段中输入播放器的产品号,然
后单击“查看所有结果”。
6. 在下一个屏幕中,单击 Get Downloads
under the Downloads menu(在下载菜
单下取得下载内容)。
7. 在下一页上单击 Software(软件)。
8. 单击 File(文件)下的 DLNA 行中的图
标以开始下载。
系统
注意
BD-LIVE Internet 连接
• 禁止 : 对所有 BD-LIVE 内容都不允许
Internet 连接。
要下载 DLNA 软件
初始设置
通过使用 初始设置功能,可以设置语言、网
络设置等。
有关 初始设置功能的详细信息,请参阅本
手册中的“初始设置”部分。(请参阅第 9
页).
快速启动
可让您将播放器设置为通过缩短开机时间来快
速打开.
✎
注意
` 如果将此功能设置为开,则待机电源
消耗将会提高。.
Anynet+ (HDMI-CEC)
Anynet+ 是一项方便的功能,它提供与具有
Anynet+ 功能的其它 Samsung 播放器相连
的操作。
要操作此功能,请使用 HDMI 电缆将播放器
连接至 Samsung 电视。
可以使用 Samsung 电视的遥控器操作播放
器,并且只需按电视遥控器上的播放(
)
按钮即可开始光盘播放。
✎
注意
` 如果 HDMI 电缆不支持 CEC,则此功
能不可用。
` 如果 Samsung 电视有 Anynet+ 徽标,
则它支持 Anynet+ 功能。
` 根据电视,某些 HDMI 输出分辨率可
能不起作用。
请参阅您电视的用户手册。
` 关闭产品之后,重新拔插电源线可
让它自动关机。 一小会之后,它会
在大约 15 秒钟內自动关闭重新建立
Anynet+ 连线。
` 对于某些电视产品,如果通过
Anynet+ 功能连接至此产品, 开启电
视时可能会显示一则警告快显讯息-,
说明找不到连线。 然而,Anynet+ 连
线已正确建立并可供使用。
BD 数据管理
安全
可让您管理从支持 BD-LIVE 服务的 Blu-ray
光盘下载的内容,这些内容存储在闪存设备
中。
可以检查设备信息(包括存储器大小)、删除 BD
数据或更改闪存设备。
✎
注意
` 在外部存储器模式中,如果在播放期
间断开 USB 设备的连接,光盘播放将
会停止。
` 播放器支持 FAT16、FAT32 和 NTFS 文
件系统。建议您使用支持 USB 2.0 协
议且具有 4 MB/秒或更高读/写速度的
USB 设备。
` 格式化存储设备后,继续播放功能可
能无法正常工作。
` BD 数据管理的总可用大小可能会因条
件而异。
DivX® 视频点播
查看 DivX® VOD 注册代码,购买并播放
DivX® VOD 内容。
语言
可以选择首选用于主菜单、光盘菜单等等的
语言.
✎
注意
` 仅当光盘支持选择的语言时,它才会
显示。
第一次操作此菜单时,密码设置屏幕将会出现。
使用数字按钮输入所需的 4 位数密码。
` 对于不稳定的 Internet 连接或在软件升级期
间消费者粗心大意造成的产品功能异常,
Samsung Electronics 不承担任何法律责
任。
` 使用 从网络中下载 插孔进行软件升级
时,光盘托架必须是空的。
常规
时区
可以指定适合您所在地区的时区。
BD 家长分级控制
支持
禁止播放特定年龄分级的 Blu-ray 光盘,除
非输入密码。
软件升级
DVD 家长分级控制
此功能与已指定年龄分级或数字分级的 Bluray 光盘/DVD 搭配使用,分级表示内容的成
熟度。
这些数字有助于控制家庭观看的 Blu-ray 光
盘/DVD 类型。
在家长分级控制中选择您要设置的年龄分级,
例如,如果您选择级别 6,则产品将播放 6
级和以下分级的光盘,不能播放 7 级或 8 级
的光盘。
更改PIN码
更改用于访问安全功能的 4 位数的密码。
如果您忘记密码
1. 取出光盘。
2. 按下前面板上的播放/暂停按钮 @ 按钮
并保持 5 秒以上。
所有设置将恢复为出厂默认设置。
✎
软件升级菜单可让您升级播放器软件,以提
高性能或取得其它服务.
从网络中下载
要通过 从网络中下载,请按照下面的步骤操
作:
1.
选择 通过网络,然后按 v 按钮。消息
“链接至服务器”将会出现。
2. 如果有更新可用,将会出现一则弹出消
息。
3. 如果您选取 Yes(是), 下载程序將会
开始。 (在升级期间,切勿开启播放
机。)
4. 更新完成后,播放机会自动重新启动。
✎
注意
` 当产品在重新启动后关闭时,更新就
完成了。按电源按钮打开更新后的产
品以进行使用。
` 在更新期间,切勿手动关闭或打开产
品。
从USB升级
要通过 USB 升级,请按照下面的步骤操作:
1. 访问 www.samsung.com/bluraysupport
2. 将最新 USB 软件升级 Zip 存档下载到计
算机中。
3. 将 Zip 存档解压到计算机中。 应该生成
一个与 Zip 文件名称相同的 RUF 文件。
将文件夹复制到 USB 闪存设备。
4. 将 RUF 文件复制到 USB 闪存设备。
5. 确保播放器中无光盘,然后将 USB 闪存
设备插入播放器的 USB 端口。
6. 在播放器菜单中,转到设置>支持>软件
升级。
7.
✎
选择从USB升级。
注意
` 使用 USB Host 插孔进行软件升级时,
光盘托架必须是空的。
` 软件升级完成后,可在 软件升级菜单
中查看软件详细信息。
` 在软件升级期间,不要关闭播放器。
可能会导致播放器出现故障。
` 使用 USB Host 插孔执行软件升级时只
能使用 USB 闪存棒进行。.
注意
` 恢复出厂默认设置时,将会删除所有
存储的用户 BD 数据。
13
自动升级通知
联系 Samsung
如果已将播放器连接至网络,然后打开 自动
升级通知,则当播放器有新的软件版本可用
提供联系信息以协助您使用播放器。
时,播放器将自动通知您。
服务协议条款
要打开 自动升级通知,请按照下面的步骤操
作:
查看有关第三方内容和服务的一般声明。
1. 选择 自动升级通知,然后按 v 按钮。
重设
2.
使用 ▲▼ 按钮选择 打开,然后按 v
按钮.
所有设置将还原到默认设置,网络设置和 设
置除外。
媒体播放
播放商业录制的光碟
视频
1.
2. 轻轻地将光盘推入光盘托架中,光盘的
标签向上。
3.
如果有新的软件版本可用,播放器会通过
弹出消息通知您。
1. 如果有更新可用,则会出现一条弹出消
息,并询问您是否要升级。如果选择
是,则产品会自动关闭,再重新启动,
然后开始升级。
(此时不要手动打开产品。)
2. 更新进度弹出窗口将会出现。
3. 更新完成后,产品会再次自动关闭。
4. 按电源按钮以打开产品。
✎
注意
` 当产品在重新启动后关闭时,更新就
完成了。按电源按钮打开更新后的产
品以进行使用。
` 在更新期间,切勿手动关闭或打开产
品。
` 对于不稳定的 Internet 连接或在软件升级期
间消费者粗心大意造成的产品功能异常,
Samsung Electronics 不承担任何法律责
任。
14
可以播放位于 USB 存储设备上的多媒体文
件。
1. 移至主菜单。
2. 在停止模式中,将 USB 存储设备连接至
产品前面板上的 USB 端口。
将会显示消息“是否要更改设备?”。
设置
123
123
6.
App 1
a
a 更改设备
c 安全移除 USB
d 查看设备
" 确认
按 ◄► 按钮选择所需的视频、音乐
或照片,然后按 v 按钮。 转至步
骤 7。
4-1. 蓝色 (D) 按钮,将出现以下屏幕。 转至
5-1.
123
a
设置
按 ◄► 按钮选择是,然后按 v 按钮.
4. 如果 Blu-ray 播放機中有光碟,請按紅
色 (A) 或藍色 (D) 按鈕。 如果沒有,請
移至步驟 6.
如果按红色 (A) 按钮,请转至步骤 5。
如果按蓝色 (D) 按钮,请转至步骤 4-1。
5.
音乐
无光盘
按 8 按钮以关闭光盘托架。播放将会
自动开始。
播放 USB 裝置上的档案
3.
照片
按 8 按钮以打开光盘托架。
按 ▲▼ 按钮选择 USB,然后按 v
按钮.
App 1
123
d 主页 " 确认
5-1. 按 ◄► 按钮选择 USB,然后按 v 按
钮。
6-1. 按 ▲▼ 按钮选择所需的视频、音乐或照
片,然后按 v 按钮.
7. 将会出现一个画面,其中列出装置的内
容,视内容的排列方式而定,您将看到
资料夹及个别档案。
8. 必要时,使用 ▲▼◄► 按钮选择文件
夹,然后按 v 按钮。
9.
✎
使用 ▲▼◄► 按钮选择要观看或播放的
文件,然后按 v 按钮。
注意
` 虽然播放器将显示所有内容类型的文
件夹,但是它仅显示在步骤 6 或 6-1
中选择的内容类型的文件。例如,如
果您选择了“音乐”,将只能看到
音乐文件. 您可以透过回到 Home(首
页)画面并重复步骤4来变更此选项。
10. 按 RETURN(返回)按钮一次以上结束
目前的画面,结束资料夹或回到 Home
首页画面。 按 EXIT结束按钮以直接回
到 Home 首页画面。
✎
播放含有用户烧录内容的光盘
播放位于 PC 中的內容
7.
您可以播放已在 Blu-ray, DVD 或 CD 光盘上
烧录的多媒体文件。.
若要在 Blu-ray 光碟播放机上播放 位于 PC 中
的內容,您必须將 Blu-ray 播放机连接到网络
并在 PC 上安裝 DLNA 软件。
8.
1.
2.
✎
` 如果在播放 USB 存储设备时插入光
盘,则设备模式会自动更改为 “Bluray, DVD 或 CD”.
使用 ◄► 按钮选择要观看或播放的内
容类型 - 视频、照片或音乐 - 然后按
v 按钮。
注意
` 虽然播放器将显示所有内容类型的文
件夹,但是它仅显示在步骤 2中选择
的内容类型的文件。例如,如果您选
择了“音乐”,将只能看到音乐文件.
您可以透过回到 Home(首页)画面并
重复步骤2来变更此选项。
注意
` 必须安全移除 USB 存储设备(通过执
行“安全移除 USB”功能),以避免
可能损坏 USB 存储器。
按菜单按钮移至主菜单,然后按黄色
(C) 按钮,接着按 v 按钮。
将用户烧录的光盘放入光盘托架中,光
盘的标签面朝上,然后关闭托架。“已
连接设备”弹出窗口将会出现。
3.
4.
5.
6.
播放 PC 中的內容
1.
3. 在随后出现的 Device(裝置)画面中,
选取 PC。, 然后按 v 按钮.
✎
必要时,使用 ▲▼◄► 按钮选择文件
夹,然后按 v 按钮。
使用 ▲▼◄► 按钮选择要观看或播放的
文件,然后按 v 按钮。
按 RETURN(返回)按钮一次以上结束
目前的画面,结束资料夹或回到 Home
首页画面。 按 EXIT结束按钮以直接回
到 Home 首页画面。
使用 ◄► 按钮选择要观看或播放的内
容类型 - 视频、照片或音乐 - 然后按
v 按钮。
5.
6.
控制视频播放
您可以控制位于 Blu-ray, DVD、CD, USB、
移动设备或计算机上的视频内容的播放。根
据光盘或内容,本手册中说明的一些功能可
能不可用。.
遥控器上用于视频播放的按钮
注意
` 虽然播放器将显示所有内容类型的文
件夹,但是它仅显示在步骤 4中选择
的内容类型的文件。例如,如果您选
择了“音乐”,将只能看到音乐文件.
您可以透过回到 Home 首页 画面并重
复步骤4来变更此选项 。
将会出现一个画面,其中列出装置的内
容。视内容的排列方式,您将看到资料
夹及个别档案。
按 RETURN(返回)按钮一次以上结束
目前的画面,结束资料夹或回到 Home
首页画面。 按 EXIT结束按钮以直接回
遥控器
到 Home 画面,结束资料夹。
移至主菜单.
2. 按遥控器(裝置)上的蓝色 (D) 按钮:.
4.
使用 ▲▼◄► 按钮选择要观看或播放的
文件,然后按 v 按钮。
2
1
将会出现一个画面,其中列出装置的内
容,视内容的排列方式而定,您将看到
资料夹及个别档案。
必要时,使用 ▲▼◄► 按钮选择文件
夹,然后按 v 按钮。
15
与播放相关的按钮
使用光盘菜单、标题菜单、弹出菜单
和标题列表
在“搜索”、“慢动作播放”或“逐个动作播
放”模式中,播放器不会播放声音.
• 要恢复正常速度播放,请按 6 按钮.
DISC MENU
按钮
在播放期间,按此按钮可
以显示光盘菜单。
开始播放。
TITLE MENU
按钮
在播放期间,按此按钮可
以显示标题菜单。
POPUP MENU
按钮
在播放期间,按此按钮可
以显示弹出菜单。
6 按钮
5 按钮
停止播放。
7 按钮
暂停播放。
快动作播放
在播放期间,按 3 或 4
按钮。
每次按 3 或 4 按钮,播
放速度都会发生变化。
慢动作播放
在暂停模式中,按 4 按
钮。
每次按 4 按钮,播放速度
都会发生变化。
在暂停模式中,按 7 按
钮。
逐个动作播放
每次按 7 按钮,新的一帧将
会出现。
遥控器
控制音乐播放
2
跳过:在播放期间,按 1 或 2 按
钮可移至播放列表的上一页或下一
页。
关
5 按钮:停止曲目。
(
) 曲目
将重复播放当前曲目
3
) 全部
重复播放所有曲目
4
快速播放(仅限音频 CD (CD-DA))
在播放期间,按 3 或 4 按钮。
每次按 3 或 4 按钮,播放速度都
会发生变化。
(
(
)随机播放
选择随机将根据随机顺
序播放曲目
5
暂停:暂停曲目。
6
6 按钮:播放当前选择的曲目。
您可以控制位于 Blu-ray, DVD、CD、USB、
移动设备或计算机上的音乐内容的播放。
重复音频 CD (CD-DA)/MP3
遥控器上用于音乐播放的按钮
1. 在“播放列表”播放期间,按工具按钮。.
TRACK 001
1
00:08 / 05:57
3
1
5
6
数字按钮 (仅限音频 CD (CDDA)):在“播放列表”播放期间,
按所需曲目编号。
将会播放所选择的曲目。
CD
播放列表
1.
TRACK 001
02:38
TRACK 003
02:38
TRACK 005
1/6
02:38
02:38
TRACK 009
02:38
03:41
TRACK 005
" 暂停
TRACK 007
04:07
TRACK 004
1/2 页
音乐 TRACK 001
CD
TRACK 002
02:38
TRACK 004
02:38
TRACK 006
02:38
TRACK 008
02:38
TRACK 010
02:38
c 选择
( ) 页面跳转
' 返回
03:17
03:35
工具
' 返回
2.
按 ◄► 按钮选择 曲目, 全部, 随机播放,
或 关.
3.
按 v 按钮.
2.
按 ▲▼◄► 按钮移至所需曲目,然后按
黄色 (C) 按钮。此时曲目上会出现一个
选中标记。
重复此步骤以选择其它曲目。
3. 要从列表中移除曲目,移动至曲目,然
后按黄色 (C) 按钮。
曲目上的选中标记将被取消。
4.
5.
16
要移至“音乐列表”,请按 5 或返回按
钮。
“音乐列表”屏幕将会出现。
TRACK 001
重复模式
? 关 \05:57
TRACK
002
< 调整 " 选择 ' 返回
04:27
TRACK 006
4
2
工具
TRACK 003
+
在播放期间,按 1 或 2
按钮。
每次按 1 或 2 按钮,
跳过动作播放
光盘都会移至前一章/前一
个文件或下一章/下一个文
件。
播放列表
歌曲将按其录制顺序播
放
完成后,按 v 按钮。
若要变更播放清单,请回 按钮回到
Music List(音乐清单)。 重复步骤
2、3 和 4。
6.
✎
若要取消播放清单并返回到 Home(首
页)画面,请按 Return(返回)或 Exit
(结束)按钮。
注意
` 可以在音频 CD (CD-DA) 上创建最多
含有 99 个曲目的播放列表。
` 如果您移除播放清单中的所有曲目,
然后按 v 按鈕,则播放机会列出并
播放光碟上的所有曲目。
✎
注意
` 根据光盘或存储设备,Tools 菜单可能
不相同。
` 要启用背景音乐功能,照片文件必须
同音乐文件存储在同一介质中。
但是,声音质量可能会受到 MP3 文
件位速率、照片大小和编码方法的影
响。
` 在全屏幕模式中,不能放大字幕和 PG
图片.
附录
故障排除
在请求服务之前,请尝试下列解决方案。.
问题
不能使用遥控器执行任何操
作。
• 检查遥控器中的电池。它们可能需要更换。
• 在离播放器不超过 6.1 米的距离内操作遥控器。
• 取出电池并按下一个或多个按钮几分钟以使遥控器中
的微处理器完全放电,这样来重设遥控器。重新安装
电池并重试操作遥控器。
• 在产品内无光盘的情况下,按前面板上的 @ 按钮超过
5 秒钟。所有设置将恢复为出厂默认设置。
• 按前面板上的 P 按钮超过 5 秒钟。
光盘不播放。
• 请确保安装光盘时标签向上。
• 检查 Blu-ray 光盘/DVD 的地区代码。
光盘菜单不出现。
• 请确保光盘有光盘菜单。
禁止消息出现在屏幕上。
• 当按无效的按钮时,此消息就会出现。
• Blu-ray 光盘/DVD 的软件不支持该功能(例如,视
角)。
• 您请求了超出范围的标题号、章节号或搜索时间。
播放模式不同于“设置菜单”选
择。
• 在“设置菜单”中选择的一些功能可能无法正常工作
(当光盘未用相应的功能编码时)。
屏幕比例无法更改。
• 屏幕比例在 Blu-ray 光盘/DVD 上是固定的。
• 这并非是播放器存在问题。
无音频。
• 请确保在“音频选项”菜单中选择了正确的“数字输
出”。
播放照片内容
您可以播放位于 Blu-ray, DVD、CD, USB、
移动设备或计算机上的照片内容。
使用工具菜单
在播放期间,按 TOOLS 按钮.
开始播放幻灯 选择此项开始幻灯片播
片
放。
背景音乐
选择此项可以一边观看幻
灯片播放一边听音乐。
缩放
选择此项可以放大图片。
(最多放大 4 倍)
旋转
选择此项可以旋转图片。
(这会使图片顺时针或逆
时针旋转。)
信息
显示图片信息。
解决方案
17
问题
屏幕空白。
忘记 PIN
解决方案
• 如果 HDMI 输出设置为电视不支持的分辨率(例如,
1080p),
则可能在电视上看不到图像。
• 在产品内无光盘的情况下,按前面板上的 @ 按钮超过
5 秒钟。所有设置将恢复为出厂默认设置。
• 恢复出厂默认设置时,将会删除所有存储的用户 BD
数据。
• 在产品内无光盘的情况下,按前面板上的 @ 按钮超过
5 秒钟。所有设置(包括密码)将恢复为出厂默认设
置。
除非绝对必要,否则不要使用此功能。
• 恢复出厂默认设置时,将会删除所有存储的用户 BD
数据。
图像有杂讯或变形
• 请确保光盘不脏或没有刮花。
• 清洁光盘。
没有 HDMI 输出。
• 检查电视与播放器的 HDMI 插孔之间的连接。
• 检查电视是否支持 576p/480p、720p、1080i 或 1080p
HDMI 输入分辨率。
HDMI 输出屏幕异常。
• 如果电视不支持 HDCP(高带宽数字内容保护),那么
屏幕上将出现雪花信噪。
如果您遇到其它问题
• 转至目录并查找包含有关当前问题说明的用户手册章
节,并再次按照程序操作。
• 如果仍然无法解决问题,请与最近的 Samsung 授权服
务中心联系。
18
问题
解决方案
DLNA 功能
可以看到 DLNA 共享文件夹,但
看不到文件。
• DLNA 仅显示视频、照片和音乐文件。不显示其他类型
的文件。
视频播放断断续续。
• 检查网络是否稳定。
• 检查网络电缆连接是否正确,以及网络是否超载。
播放器与计算机之间的 DLNA 连
接不稳定。
• 相同子网中的 IP 地址应该是唯一的。
如果不是,IP 冲突会引发此种现象。
• 检查是否已启用防火墙。
如果已启用,请禁用防火墙功能。
BD-LIVE
我无法连接至 BD-LIVE 服务器。
• 使用“网络状态”功能测试网络连接是否成功。
• 检查 USB 内存设备是否已连接到播放器。
• 存储设备至少必须有 1GB 可用空间才能容纳 BD-LIVE 服
务。
可以在“BD 数据管理”中检查可用空间大小。请检查“BD-LIVE
Internet 连接”选项是否设置为“允许(全部)”。
• 如果上述检查结束后问题仍然存在,请与内容提供商
联系或为播放器更新最新固件。
使用 BD-LIVE 服务时,发生错
误。
• 存储设备至少必须有 1GB 可用空间才能容纳 BD-LIVE 服
务。
可以在“BD 数据管理”中检查可用空间大小。
✎
注意
` 恢复出厂默认设置时,将会删除所有存储的用户 BD 数据。
产品内有害物质信息
维修
有毒有害物质元素
如果联系我们对播放器进行维修,在下列情况下可能需要支付管理费:
1. 请求工程师到您家中维修,并且发生的问题并非产品缺陷。
2. 您将机组带至维修中心,但不存在产品缺陷。
进行家庭现场维修或开始维修播放器前,我们会声明管理费用数额。
我们建议您先全面阅读此手册,在线访问 www.samsung.com 搜索解决方案,或者联系
Samsung 客户中心,然后再寻求对播放器进行维修。
铅(Pb)
汞(Hg)
镉(Cd)
六价铬
Cr(VI)
多溴联苯
(PBB)
多溴二苯
醚
(PBDE)
印制电路板组
件
X
O
O
O
O
O
金属部品
X
O
O
O
O
O
O
O
O
O
O
O
部件名称
电缆
规格
常规
USB
HDMI
音频输出
网络
塑料部品
重量
1.0 公斤
尺寸
269 (长) X 193 (宽) X 39 (高) 毫米
操作温度范围
+5°C 至 +35°C
操作湿度范围
10 % 至 75 %
类型 A
USB 2.0
DC 输出
最大 5V 0.5A。
视频
1080p、1080i、720p、576p/480p
音频
PCM 或源码
数字音频输出
同轴电缆
以太网
100BASE - TX 端子
X
O
O
O
O
O
O :部品中有毒有害物质含量在<含量标准>的标准值内
X :部品中有毒有害物质含量超出<含量标准>的标准值
本表格表明机器内部含有有害物质,数据是根据部件类型,由部件制作商提供并在三星电
子内部验证后做成的。
某些部品包含的有害物质,按照现在的技术基准不能替代,三星电子一直在为改善此项而
努力。
企业标准编号: Q/12JD 5958-2013
• 不支持等于或低于 10Mbps 的网络速度。
• 设计和规格可能会随时更改,恕不提前通知。
• 对于电源和功耗,请参阅贴在播放器上的标签。
• 重量和尺寸均为近似值。
19
符合性和兼容性声明
并非所有光盘都兼容
• 受下面所述限制以及整本手册(包括本用户手册的“光盘类型和特征”一节)中说明的那
些限制约束,可以播放的光盘类型有:预先录制的商业 BD-ROM、DVD-VIDEO 和音频 CD
(CD-DA) 光盘;BD-RE/-R、DVD-RW/-R 光盘和 CD-RW/-R 光盘。
• 本播放器不能和不用于播放上述光盘以外的光盘。并且由于下面提供的一个或多个原因,
上面的一些光盘可能不能播放。
• Samsung 不能保证本播放器将可以播放带有 BD-ROM、BD-RE/-R、DVD-VIDEO、DVDRW/-R、DVD+RW/+ R 和 CD-RW/-R 徽标的每张光盘,并且本播放器可能不会响应所有
操作命令或操作每张光盘的所有功能。造成这些光盘及其它光盘与具有新格式或现有格式
光盘的兼容性和播放器操作问题的可能原因有:
- Blu-ray 是新的不断发展的格式,本播放器可能不能操作 Blu-ray 光盘的所有功能,因为一些功能
可能是在生产本播放器之后才添加到 Blu-ray 光盘格式的可选附加功能,并且某一些可用的功能可
能会延后提供;
- 本播放器并不支持所有新的和现有的光盘格式版本;
- 可能会对新的和现有的光盘格式进行修改、更改、更新、改进和补充;
-- 一些光盘的制作方式使得在播放期间只允许使用特定或有限的操作和功能;
- 带有 BD-ROM、BD-RE/-R、DVD-VIDEO、DVD-RW/-R、DVD+RW/+ R 和 CD-RW/-R 徽标的一
些光盘可能仍然是非标准化光盘;
-- 一些光盘可能无法播放,具体视其物理状态或录制条件而定;
- 在制作 Blu-ray 光盘、DVD 软件或生产光盘时可能会出现问题和发生错误;
- 本播放器的操作方式不同于标准 DVD 播放器或其它 AV 设备;
- 出于本用户手册中提到的原因和 SAMSUNG 客户服务中心发现和公布的其它原因。
• 如果您遇到光盘兼容性或播放器操作问题,请与 SAMSUNG 客户中心联系。
还可与 SAMSUNG 客户中心联系,以获取可能存在的有关本播放器的更新。
• 有关播放限制和光盘兼容性的其它信息,请参阅本用户手册的“预防措施”、“在阅读本
用户手册之前”、“光盘类型和特征”和“在播放之前”等节。
• 对于 Blu-ray 光盘播放机逐行扫描输出:消费者应注意,并非所有高清电视都完全与本产
品兼容,并且可能会导致在图像中显示杂讯。如果发生逐行扫描图像问题,建议用户将连
接切换至“标准定义”输出。如果对我们电视机与本产品的兼容性存在疑问,请与我们的
客户服务中心联系。
复制保护
• 因为 AACS(高级访问内容系统)已获准成为 Blu-ray 光盘格式的内容保护系统,这类似
于对 DVD 格式使用 CSS(内容加扰系统),受 AACS 保护的内容会存在播放、模拟信号
输出等特定限制。
本产品的操作和对本产品的限制可能会因购买时间而异,因为在生产本产品之后,AACS
可能会承继或更改那些限制。另外,BD-ROM 标记和 BD+ 另用作 Blu-ray 光盘格式的内
容保护系统,它们施加特定限制,包括对含有 BD-ROM 标记和受 BD+ 保护内容的播放限
20
制。要获取有关 AACS、BD-ROM 标记、BD+ 或本产品的其它信息,请与 SAMSUNG 客
户中心联系。
• 许多 Blu-ray 光盘/DVD 在编码时带复制保护。因此,只应将播放器直接连接到电视,不能
连接至 VCR。连接至 VCR 可能会导致受复制保护的 Blu-ray 光盘/DVD 产生图像失真。
• 在美国版权法和其它国家/地区的版权法保护下,未经授权录制、使用、显示、分发或修
订电视节目、录像带、Blu-ray 光盘、DVD 和其它材料,您可能必须承担民事和/或刑事责
任。
• Cinavia 声明:本产品使用 Cinavia 技术来限制使用一些商业制造的电影和视频及其声道
的未获得授权的副本。检测到禁止使用未获得授权的副本的情况时,将会显示消息,并且
播放或复制将会中断。
有关 Cinavia 技术的更多信息,在 Cinavia 在线消费者信息中心提供,网址如下:
http://www.cinavia.com。要通过邮件请求关于 Cinavia 的更多信息,请将含有您的邮
寄地址的明信片寄往:Cinavia Consumer Information Centre, P.O. Box 86851, San
Diego, CA, 92138, USA.
本产品融合了在获得 Verance Corporation 许可并且受美国专利 7,369,677 以及其他在
盖和世界各地已公布和正在申请的专利保护,并且受此类技术特定方面的版权和商业秘密
保护。Cinavia 是 Verance Corporation 的商标。2004-2010 Verance Corporation 版权
所有。Verance 保留一切权利。严禁进行逆向工程和反汇编。
网络服务免责声明
通过此设备访问的所有内容和服务均属于第三方,并且受到版权、专利、商标和其它知识产
权相关法律的保护。提供给您的这些内容和服务只能用于个人非商业用途。除内容所有者或
服务提供商的授权方式之外,不得以其它方式使用任何内容或服务。未经内容所有者或服务
提供商事先明确授权,不得修改、复制、重新发布、上载、公布、传送、翻译、销售、创造
衍生作品、开发或以任何方式或媒体分发通过此设备显示的任何内容或服务。
第三方内容和服务均“按现状”提供。SAMSUNG 不对此处提供的内容或服务提供基于任何
目的的明示或暗示的保证。SAMSUNG 明确拒绝提供任何暗示的保证,其中包括但不仅于有
关适销性或针对特定用途的适用性的保证。SAMSUNG 不保证可通过此设备获取的内容或服
务的准确性、有效性、及时性、合法性或完整性;无论 任何情况下(包括疏忽所致),无论
是合同行为还是侵权行为,对于您或任何第三方使用任何内容或服务所导致的任何直接、间
接、偶然、特殊或附带性损害,及律师费、开支或任何其它与此有关的损失和包含其中的信
息损失,SAMSUNG 将不承担任何赔偿责任,即便 SAMSUNG 事先已被告知此种损害发生
的可能性。
第三方服务可能随时中止或中断,Samsung 不表示或保证任何内容或服务的可用期限。对于
第三方通过网络方式和传输设备传送的内容和服务,Samsung 无法控制。在不影响本免责声
明一般性的前提下,对于从此设备获取内容或服务的中断或中止,Samsung 明确拒绝承担任
何责任。
Samsung 也不对与此类内容和服务有关的客户服务承担责任。任何与此内容或服务相关的服
务请求都应直接转至相应的内容和服务提供商。
• Oracle 和 Java 是 Oracle 和/或其附属公司的注册商标。其它名称可能
是其各自所有者的商标
许可证
• 根据 Dolby Laboratories 许可制造。Dolby 和双 D 符号是 Dolby
Laboratories 的商标.
• 开源许可证声明
- 在使用开源软件的情况下,可在产品菜单中找到开源许可证。
• 在以下美国专利号:5,956,674;5,974,380;6,487,535 以及其它在美国和
世界各地公布和正在申请的专利许可下进行制造。DTS、符号及 DTS 和符号
一起是 DTS, Inc. 的注册商标,并且 DTS 2.0+Digital Out 是 DTS, Inc.
的商标。产品包括软件。© DTS, Inc. 版权所有。
• DivX
• Blu-ray Disc™、Blu-ray™ 和相关徽标是 Blu-ray Disc Association 的商标。
2.0+Digital Out
- 关于 DIVX 视频: DivX® 中 DivX, LLC(Rovi Corporation 的一个
子公司)创建的数字视频格式。
此设备是通过 DivX Certified® 官方认证的 DivX 视频播放设
备。
请访问 www.divx.com,以取得有关将文件转换为 DivX 视频的更多信息和软
件工具。
- 关于 DIVX 视频点播:此 DivX Certified® 认证设备必须经过注册才能播放
DivX 视频点播 (VOD) 电影。要获取注册码,请定位到设备设置菜单中的 DivX
VOD 部分。请访问 vod.divx.com,以获取有关完成注册的更多信息。
- 取得 DivX Certified® 认证以播放高达 HD 1080p 的 DivX® 视频,其中包括收
费内容。
- DivX®、DivX Certified® 和相关联的徵标是 Rovi Corporation 或其子公司的商
标且只能授权使用。
• DLNA®, 、DLNA 标志及 DLNA CERTIFIED® 是 Digital Living
Network Alliance 的商标,服务标记或凭证标记。
- 受以下某项或多项美国专利保护: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
• HDMI、HDMI 徽标和 High-Definition Multimedia Interface 是 HDMI
Licensing LLC 在美国和/或其它国家或地区的商标或注册商标。
21
SAMSUNG 全球联系方法
如果您对 Samsung 产品有任何问题或意见,请与 SAMSUNG 客户中心联系。
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
1800-88-9999
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Area
` Middle East
U.A.E
OMAN
KUWAIT
BAHRAIN
Egypt
JORDAN
IRAN
Morocco
Saudi Arabia
` Africa
NIGERIA
Ghana
Cote D’ Ivoire
Senegal
Cameroon
KENYA
UGANDA
TANZANIA
SOUTH AFRICA
Contact Centre 
Web Site
800-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
183-2255
8000-4726
08000-726786
800-22273
021-8255
080 100 2255
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
AK68-02287A-00
AK68-02287A-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising